-
Fast single-qubit gates for continuous dynamically decoupled systems
Authors:
Michael Senatore,
Daniel L. Campbell,
James A. Williams,
Matthew D. LaHaye
Abstract:
Environmental noise that couples longitudinally to a quantum system dephases that system and can limit its coherence lifetime. Performance using quantum superposition in clocks, information processors, communication networks, and sensors depends on careful state and external field selection to lower sensitivity to longitudinal noise. In many cases time varying external control fields--such as the…
▽ More
Environmental noise that couples longitudinally to a quantum system dephases that system and can limit its coherence lifetime. Performance using quantum superposition in clocks, information processors, communication networks, and sensors depends on careful state and external field selection to lower sensitivity to longitudinal noise. In many cases time varying external control fields--such as the Hahn echo sequence originally developed for nuclear magnetic resonance applications--can passively correct for longitudinal errors. There also exist continuous versions of passive correction called continuous dynamical decoupling (CDD), or spin-locking depending on context. However, treating quantum systems under CDD as qubits has not been well explored. Here, we develop universal single-qubit gates that are ``fast'' relative to perturbative Rabi gates and applicable to any CDD qubit architecture. We demonstrate single-qubit gates with fidelity $\mathcal{F}=0.9947(1)$ on a frequency tunable CDD transmon superconducting circuit operated where it is strongly sensitive to longitudinal noise, thus establishing this technique as a potentially useful tool for operating qubits in applications requiring high fidelity under non-ideal conditions.
△ Less
Submitted 16 December, 2024;
originally announced December 2024.
-
Bypassing the filtering challenges in microwave-optical quantum transduction through optomechanical four-wave mixing
Authors:
James Schneeloch,
Erin Sheridan,
A. Matthew Smith,
Christopher C. Tison,
Daniel L. Campbell,
Matthew D. LaHaye,
Michael L. Fanto,
Paul M. Alsing
Abstract:
Microwave-optical quantum transduction is a key enabling technology in quantum networking, but has been plagued by a formidable technical challenge. As most microwave-optical-transduction techniques rely on three-wave mixing processes, the processes consume photons from a driving telecom-band (pump) laser to convert input microwave photons into telecom-band photons detuned from the laser by this m…
▽ More
Microwave-optical quantum transduction is a key enabling technology in quantum networking, but has been plagued by a formidable technical challenge. As most microwave-optical-transduction techniques rely on three-wave mixing processes, the processes consume photons from a driving telecom-band (pump) laser to convert input microwave photons into telecom-band photons detuned from the laser by this microwave frequency. However, cleanly separating out single photons detuned only a few GHz away from a classically bright laser in the same spatial mode requires frequency filters of unprecedented extinction over a very narrow transition band, straining the capabilities of today's technology. Instead of confronting this challenge directly, we show how one may achieve the same transduction objective with comparable efficiency using a four-wave mixing process in which $pairs$ of pump photons are consumed to produce transduced optical photons widely separated in frequency from the pump. We develop this process by considering higher-order analogues of photoelasticity and electrostriction than those used in conventional optomechanics, and examine how the efficiency of this process can be made to exceed conventional optomechanical couplings.
△ Less
Submitted 27 September, 2024;
originally announced September 2024.
-
Principles for Optimizing Quantum Transduction in Piezo-Optomechanical Systems
Authors:
James Schneeloch,
Erin Sheridan,
A. Matthew Smith,
Christopher C. Tison,
Daniel L. Campbell,
Matthew D. LaHaye,
Michael L. Fanto,
Paul M. Alsing
Abstract:
Two-way microwave-optical quantum transduction is essential to connecting distant superconducting qubits via optical fiber, and to enable quantum networking at a large scale. In Blésin, Tian, Bhave, and Kippenberg's article, ``Quantum coherent microwave-optical transduction using high overtone bulk acoustic resonances" (Phys. Rev. A, 104, 052601 (2021)), they lay out a two-way quantum transducer c…
▽ More
Two-way microwave-optical quantum transduction is essential to connecting distant superconducting qubits via optical fiber, and to enable quantum networking at a large scale. In Blésin, Tian, Bhave, and Kippenberg's article, ``Quantum coherent microwave-optical transduction using high overtone bulk acoustic resonances" (Phys. Rev. A, 104, 052601 (2021)), they lay out a two-way quantum transducer converting between microwave photons and telecom-band photons by way of an intermediary GHz-band phonon mode utilizing piezoelectric and optomechanical interactions respectively (and are the first to work out the quantum piezoelectric coupling). In this work, we examine both the piezoelectric, and optomechanical interactions from first principles, and together with the evanescent coupling between optical modes, discuss what parameters matter most in optimizing this kind of quantum transducer. For its additional utility, we have also compiled a table of relevant properties of optical materials that may be used as elements in transducers.
△ Less
Submitted 17 January, 2025; v1 submitted 7 December, 2023;
originally announced December 2023.
-
Entangling interactions between artificial atoms mediated by a multimode left-handed superconducting ring resonator
Authors:
T. McBroom-Carroll,
A. Schlabes,
X. Xu,
J. Ku,
B. Cole,
S. Indrajeet,
M. D. LaHaye,
M. H. Ansari,
B. L. T. Plourde
Abstract:
Superconducting metamaterial transmission lines implemented with lumped circuit elements can exhibit left-handed dispersion, where the group and phase velocity have opposite sign, in a frequency range relevant for superconducting artificial atoms. Forming such a metamaterial transmission line into a ring and coupling it to qubits at different points around the ring results in a multimode bus reson…
▽ More
Superconducting metamaterial transmission lines implemented with lumped circuit elements can exhibit left-handed dispersion, where the group and phase velocity have opposite sign, in a frequency range relevant for superconducting artificial atoms. Forming such a metamaterial transmission line into a ring and coupling it to qubits at different points around the ring results in a multimode bus resonator with a compact footprint. Using flux-tunable qubits, we characterize and theoretically model the variation in the coupling strength between the two qubits and each of the ring resonator modes. Although the qubits have negligible direct coupling between them, their interactions with the multimode ring resonator result in both a transverse exchange coupling and a higher order $ZZ$ interaction between the qubits. As we vary the detuning between the qubits and their frequency relative to the ring resonator modes, we observe significant variations in both of these inter-qubit interactions, including zero crossings and changes of sign. The ability to modulate interaction terms such as the $ZZ$ scale between zero and large values for small changes in qubit frequency provides a promising pathway for implementing entangling gates in a system capable of hosting many qubits.
△ Less
Submitted 12 May, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Isogeometric simulation of acoustic radiation
Authors:
Victoria Hernández Mederos,
Eduardo Moreno Hernández,
Jorge Estrada Sarlabous,
Isidro A. Abelló Ugalde,
Domenico Lahaye
Abstract:
In this paper we discuss the numerical solution on a simple 2D domain of the Helmoltz equation with mixed boundary conditions. The so called radiation problem depends on the wavenumber constant parameter k and it is inspired here by medical applications, where a transducer emits a pulse at a given frequency. This problem has been successfully solved in the past with the classical Finite Element Me…
▽ More
In this paper we discuss the numerical solution on a simple 2D domain of the Helmoltz equation with mixed boundary conditions. The so called radiation problem depends on the wavenumber constant parameter k and it is inspired here by medical applications, where a transducer emits a pulse at a given frequency. This problem has been successfully solved in the past with the classical Finite Element Method (FEM) for relative small values of k. But in modern applications the values of k can be of order of thousands and FEM faces up several numerical difficulties. To overcome these difficulties we solve the radiation problem using the Isogeometric Analysis (IgA), a kind of generalization of FEM. Starting with the variational formulation of the radiation problem, we show with details how to apply the isogeometric approach in order to compute the coefficients of the approximated solution of radiation problem in terms of the B-spline basis functions. Our implementation of IgA using GeoPDEs software shows that isogeometric approach is superior than FEM, since it is able to reduce substantially the pollution error, especially for high values of k, producing additionally smoother solutions which depend on less degrees of freedom.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Roadmap on quantum nanotechnologies
Authors:
Arne Laucht,
Frank Hohls,
Niels Ubbelohde,
M Fernando Gonzalez-Zalba,
David J Reilly,
Søren Stobbe,
Tim Schröder,
Pasquale Scarlino,
Jonne V Koski,
Andrew Dzurak,
Chih-Hwan Yang,
Jun Yoneda,
Ferdinand Kuemmeth,
Hendrik Bluhm,
Jarryd Pla,
Charles Hill,
Joe Salfi,
Akira Oiwa,
Juha T Muhonen,
Ewold Verhagen,
Matthew D LaHaye,
Hyun Ho Kim,
Adam W Tsen,
Dimitrie Culcer,
Attila Geresdi
, et al. (4 additional authors not shown)
Abstract:
Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing qu…
▽ More
Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing quantum mechanical effects in condensed matter. These quantum phenomena, in turn, have the potential to revolutionize the way we communicate, compute and probe the nanoscale world. Here, we review developments in key areas of quantum research in light of the nanotechnologies that enable them, with a view to what the future holds. Materials and devices with nanoscale features are used for quantum metrology and sensing, as building blocks for quantum computing, and as sources and detectors for quantum communication. They enable explorations of quantum behaviour and unconventional states in nano- and opto-mechanical systems, low-dimensional systems, molecular devices, nano-plasmonics, quantum electrodynamics, scanning tunnelling microscopy, and more. This rapidly expanding intersection of nanotechnology and quantum science/technology is mutually beneficial to both fields, laying claim to some of the most exciting scientific leaps of the last decade, with more on the horizon.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
Coupling a Superconducting Qubit to a Left-Handed Metamaterial Resonator
Authors:
S. Indrajeet,
H. Wang,
M. D. Hutchings,
B. G. Taketani,
Frank K. Wilhelm,
M. D. LaHaye,
B. L. T. Plourde
Abstract:
Metamaterial resonant structures made from arrays of superconducting lumped circuit elements can exhibit microwave mode spectra with left-handed dispersion, resulting in a high density of modes in the same frequency range where superconducting qubits are typically operated, as well as a bandgap at lower frequencies that extends down to dc. Using this novel regime for multi-mode circuit quantum ele…
▽ More
Metamaterial resonant structures made from arrays of superconducting lumped circuit elements can exhibit microwave mode spectra with left-handed dispersion, resulting in a high density of modes in the same frequency range where superconducting qubits are typically operated, as well as a bandgap at lower frequencies that extends down to dc. Using this novel regime for multi-mode circuit quantum electrodynamics, we have performed a series of measurements of such a superconducting metamaterial resonator coupled to a flux-tunable transmon qubit. Through microwave measurements of the metamaterial, we have observed the coupling of the qubit to each of the modes that it passes through. Using a separate readout resonator, we have probed the qubit dispersively and characterized the qubit energy relaxation as a function of frequency, which is strongly affected by the Purcell effect in the presence of the dense mode spectrum. Additionally, we have investigated the ac Stark shift of the qubit as the photon number in the various metamaterial modes is varied. The ability to tailor the dense mode spectrum through the choice of circuit parameters and manipulate the photonic state of the metamaterial through interactions with qubits makes this a promising platform for analog quantum simulation and quantum memories.
△ Less
Submitted 11 December, 2020; v1 submitted 21 July, 2020;
originally announced July 2020.
-
Isogeometric solution of Helmholtz equation with Dirichlet boundary condition: numerical experiences
Authors:
Victoria Hernández Mederos,
Isidro A. Abelló Ugalde,
Rolando M. Bruno Alfonso,
Domenico Lahaye,
Valia Guerra Ones
Abstract:
In this paper we use the Isogeometric method to solve the Helmholtz equation with nonhomogeneous Dirichlet boundary condition over a bounded physical domain. Starting from the variational formulation of the problem, we show with details how to apply the isogeometric approach to obtain an approximation of the solution using biquadratic B-spline functions. To illustrate the power of the method we so…
▽ More
In this paper we use the Isogeometric method to solve the Helmholtz equation with nonhomogeneous Dirichlet boundary condition over a bounded physical domain. Starting from the variational formulation of the problem, we show with details how to apply the isogeometric approach to obtain an approximation of the solution using biquadratic B-spline functions. To illustrate the power of the method we solve several difficult problems, which are particular cases of the Helmholtz equation, where the solution has discontinuous gradient in some points, or it is highly oscillatory. For these problems we explain how to select the knots of B-spline quadratic functions and how to insert knew knots in order to obtain good approximations of the exact solution on regions with irregular boundary. The results, obtained with our Julia implementation of the method, prove that isogeometric approach produces approximations with a relative small error and computational cost.
△ Less
Submitted 21 January, 2020;
originally announced January 2020.
-
Digital Quantum Simulations of Spin Models on Hybrid Platform and Near-Term Quantum Processors
Authors:
F. Tacchino,
A. Chiesa,
M. D. LaHaye,
I. Tavernelli,
S. Carretta,
D. Gerace
Abstract:
We review a recent theoretical proposal for a universal quantum computing platform based on tunable nonlinear electromechanical nano-oscillators, in which qubits are encoded in the anharmonic vibrational modes of mechanical resonators coupled to a superconducting circuitry. The digital quantum simulation of spin-type model Hamiltonians, such as the Ising model in a transverse field, could be perfo…
▽ More
We review a recent theoretical proposal for a universal quantum computing platform based on tunable nonlinear electromechanical nano-oscillators, in which qubits are encoded in the anharmonic vibrational modes of mechanical resonators coupled to a superconducting circuitry. The digital quantum simulation of spin-type model Hamiltonians, such as the Ising model in a transverse field, could be performed with very high fidelities on such a prospective platform. Here we challenge our proposed simulator with the actual IBM-Q quantum processor available on cloud. We show that such state-of-art implementation of a quantum computer, based on transmon qubits and superconducting technology, is able to perform digital quantum simulations. However, encoding the qubits in mechanical degrees of freedom would allow to outperform the current implementations in terms of fidelity and scalability of the quantum simulation.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
On the complexity of solving a decision problem with flow-depending costs: the case of the IJsselmeer dikes
Authors:
Aida Abiad,
Sander Gribling,
Domenico Lahaye,
Matthias Mnich,
Guus Regts,
Lluis Vena,
Gerard Verweij,
Peter Zwaneveld
Abstract:
We consider a fundamental integer programming (IP) model for cost-benefit analysis flood protection through dike building in the Netherlands, due to Verweij and Zwaneveld.
Experimental analysis with data for the Ijsselmeer lead to integral optimal solution of the linear programming relaxation of the IP model.
This naturally led to the question of integrality of the polytope associated with the…
▽ More
We consider a fundamental integer programming (IP) model for cost-benefit analysis flood protection through dike building in the Netherlands, due to Verweij and Zwaneveld.
Experimental analysis with data for the Ijsselmeer lead to integral optimal solution of the linear programming relaxation of the IP model.
This naturally led to the question of integrality of the polytope associated with the IP model.
In this paper we first give a negative answer to this question by establishing non-integrality of the polytope.
Second, we establish natural conditions that guarantee the linear programming relaxation of the IP model to be integral.
We then test the most recent data on flood probabilities, damage and investment costs of the IJsselmeer for these conditions.
Third, we show that the IP model can be solved in polynomial time when the number of dike segments, or the number of feasible barrier heights, are constant.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Electromechanical Quantum Simulators
Authors:
F. Tacchino,
A. Chiesa,
M. D. LaHaye,
S. Carretta,
D. Gerace
Abstract:
Digital quantum simulators are among the most appealing applications of a quantum computer. Here we propose a universal, scalable, and integrated quantum computing platform based on tunable nonlinear electromechanical nano-oscillators. It is shown that very high operational fidelities for single and two qubits gates can be achieved in a minimal architecture, where qubits are encoded in the anharmo…
▽ More
Digital quantum simulators are among the most appealing applications of a quantum computer. Here we propose a universal, scalable, and integrated quantum computing platform based on tunable nonlinear electromechanical nano-oscillators. It is shown that very high operational fidelities for single and two qubits gates can be achieved in a minimal architecture, where qubits are encoded in the anharmonic vibrational modes of mechanical nanoresonators, whose effective coupling is mediated by virtual fluctuations of an intermediate superconducting artificial atom. An effective scheme to induce large single-phonon nonlinearities in nano-electromechanical devices is explicitly discussed, thus opening the route to experimental investigation in this direction. Finally, we explicitly show the very high fidelities that can be reached for the digital quantum simulation of model Hamiltonians, by using realistic experimental parameters in state-of-the art devices, and considering the transverse field Ising model as a paradigmatic example.
△ Less
Submitted 10 May, 2018; v1 submitted 31 October, 2017;
originally announced November 2017.
-
Measurements of nanoresonator-qubit interactions in a hybrid quantum electromechanical system
Authors:
F. Rouxinol,
Y. Hao,
F. Brito,
A. O. Caldeira,
E. K. Irish,
M. D. LaHaye
Abstract:
Experiments to probe the basic quantum properties of motional degrees of freedom of mechanical systems have developed rapidly over the last decade. One promising approach is to use hybrid electromechanical systems incorporating superconducting qubits and microwave circuitry. However, a critical challenge facing the development of these systems is to achieve strong coupling between mechanics and qu…
▽ More
Experiments to probe the basic quantum properties of motional degrees of freedom of mechanical systems have developed rapidly over the last decade. One promising approach is to use hybrid electromechanical systems incorporating superconducting qubits and microwave circuitry. However, a critical challenge facing the development of these systems is to achieve strong coupling between mechanics and qubits while simultaneously reducing coupling of both the qubit and mechanical mode to the environment. Here we report measurements of a qubit-coupled mechanical resonator system consisting of an ultra-high-frequency nanoresonator and a long coherence-time superconducting transmon qubit, embedded in superconducting coplanar waveguide cavity. It is demonstrated that the nanoresonator and transmon have commensurate energies and transmon coherence times are one order of magnitude larger than for all previously reported qubit-coupled nanoresonators. Moreover, we show that numerical simulations of this new hybrid quantum system are in good agreement with spectroscopic measurements and suggest that the nanoresonator in our device resides at low thermal occupation number, near its ground state, acting as a dissipative bath seen by the qubit. We also outline how this system could soon be developed as a platform for implementing more advanced experiments with direct relevance to quantum information processing and quantum thermodynamics, including the study of nanoresonator quantum noise properties, reservoir engineering, and nanomechanical quantum state generation and detection.
△ Less
Submitted 4 May, 2016;
originally announced May 2016.
-
Quantum simulation of the Anderson Hamiltonian with an array of coupled nanoresonators: delocalization and thermalization effects
Authors:
J. Lozada-Vera,
A. Carrillo,
O. P. de Sá Neto,
J. Khatibi Moqadam,
M. D. LaHaye,
M. C. de Oliveira
Abstract:
The possibility of using nanoelectromechanical systems as a simulation tool for quantum many-body effects is explored. It is demonstrated that an array of electrostatically coupled nanoresonators can effectively simulate the Bose-Hubbard model without interactions, corresponding in the single-phonon regime to the Anderson tight-binding model. Employing a density matrix formalism for the system cou…
▽ More
The possibility of using nanoelectromechanical systems as a simulation tool for quantum many-body effects is explored. It is demonstrated that an array of electrostatically coupled nanoresonators can effectively simulate the Bose-Hubbard model without interactions, corresponding in the single-phonon regime to the Anderson tight-binding model. Employing a density matrix formalism for the system coupled to a bosonic thermal bath, we study the interplay between disorder and thermalization, focusing on the delocalization process. It is found that the phonon population remains localized for a long time at low enough temperatures; with increasing temperatures the localization is rapidly lost due to thermal pumping of excitations into the array, producing in the equilibrium a fully thermalized system. Finally, we consider a possible experimental design to measure the phonon population in the array by means of a superconducting transmon qubit coupled to individual nanoresonators. We also consider the possibility of using the proposed quantum simulator for realizing continuous-time quantum walks.
△ Less
Submitted 30 May, 2016; v1 submitted 27 August, 2015;
originally announced August 2015.
-
Superconducting metamaterials and qubits
Authors:
B. L. T. Plourde,
Haozhi Wang,
Francisco Rouxinol,
M. D. LaHaye
Abstract:
Superconducting thin-film metamaterial resonators can provide a dense microwave mode spectrum with potential applications in quantum information science. We report on the fabrication and low-temperature measurement of metamaterial transmission-line resonators patterned from Al thin films. We also describe multiple approaches for numerical simulations of the microwave properties of these structures…
▽ More
Superconducting thin-film metamaterial resonators can provide a dense microwave mode spectrum with potential applications in quantum information science. We report on the fabrication and low-temperature measurement of metamaterial transmission-line resonators patterned from Al thin films. We also describe multiple approaches for numerical simulations of the microwave properties of these structures, along with comparisons with the measured transmission spectra. The ability to predict the mode spectrum based on the chip layout provides a path towards future designs integrating metamaterial resonators with superconducting qubits.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Superconducting Circuitry for Quantum Electromechanical Systems
Authors:
Matthew D. LaHaye,
Francisco Rouxinol,
Yu Hao,
Seung-Bo Shim,
Elinor K. Irish
Abstract:
Superconducting systems have a long history of use in experiments that push the frontiers of mechanical sensing. This includes both applied and fundamental research, which at present day ranges from quantum computing research and efforts to explore Planck-scale physics to fundamental studies on the nature of motion and the quantum limits on our ability to measure it. In this paper, we first provid…
▽ More
Superconducting systems have a long history of use in experiments that push the frontiers of mechanical sensing. This includes both applied and fundamental research, which at present day ranges from quantum computing research and efforts to explore Planck-scale physics to fundamental studies on the nature of motion and the quantum limits on our ability to measure it. In this paper, we first provide a short history of the role of superconducting circuitry and devices in mechanical sensing, focusing primarily on efforts in the last decade to push the study of quantum mechanics to include motion on the scale of human-made structures. This background sets the stage for the remainder of the paper, which focuses on the development of quantum electromechanical systems (QEMS) that incorporate superconducting quantum bits (qubits), superconducting transmission line resonators and flexural nanomechanical elements. In addition to providing the motivation and relevant background on the physical behavior of these systems, we discuss our recent efforts to develop a particular type of QEMS that is based upon the Cooper-pair box (CPB) and superconducting coplanar waveguide (CPW) cavities, a system which has the potential to serve as a testbed for studying the quantum properties of motion in engineered systems.
△ Less
Submitted 11 April, 2015;
originally announced April 2015.
-
Development of a broadband reflective T-filter for voltage biasing high-Q superconducting microwave cavities
Authors:
Yu Hao,
Francisco Rouxinol,
M. D. LaHaye
Abstract:
We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission measurements of the filter are seen to be in good agreement with simulations and demonstrate insertion losses greater than $20\,{\rm dB}$ in the range of…
▽ More
We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission measurements of the filter are seen to be in good agreement with simulations and demonstrate insertion losses greater than $20\,{\rm dB}$ in the range of ${\rm 3\,to\,10\,GHz}$. Moreover, transmission measurements of the CPW's fundamental mode demonstrate that loaded quality factors exceeding $10^5$ can be achieved with this design for dc voltages as large as ${\rm 20\,V}$ and for the cavity operated in the single-photon regime. This makes the design suitable for use in a number of applications including qubit-coupled mechanical systems and circuit QED.
△ Less
Submitted 26 September, 2014;
originally announced September 2014.
-
Testing Time Reversal Symmetry in Artificial Atoms
Authors:
Frederico Brito,
Francisco Rouxinol,
M. D. LaHaye,
Amir O. Caldeira
Abstract:
Over the past several decades, a rich series of experiments has repeatedly verified the quantum nature of superconducting devices, leading some of these systems to be regarded as artificial atoms. In addition to their application in quantum information processing, these `atoms' provide a test bed for studying quantum mechanics in macroscopic limits. Regarding the last point, we present here a feas…
▽ More
Over the past several decades, a rich series of experiments has repeatedly verified the quantum nature of superconducting devices, leading some of these systems to be regarded as artificial atoms. In addition to their application in quantum information processing, these `atoms' provide a test bed for studying quantum mechanics in macroscopic limits. Regarding the last point, we present here a feasible protocol for directly testing time reversal symmetry through the verification of the microreversibility principle in a superconducting artificial atom. Time reversal symmetry is a fundamental property of quantum mechanics and is expected to hold if the dynamics of the artificial atom strictly follow the Schrödinger equation. However, this property has yet to be tested in any macroscopic quantum system. In the end, as an application of this work, we outline how the successful implementation of the protocol would provide the first verification of the quantum work fluctuation theorems with superconducting systems.
△ Less
Submitted 30 June, 2015; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Cooling a nanomechanical resonator with quantum back-action
Authors:
A. Naik,
O. Buu,
M. D. LaHaye,
A. D. Armour,
A. A. Clerk,
M. P. Blencowe,
K. C. Schwab
Abstract:
Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomec…
▽ More
Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomechanical resonator. The conductance of the SSET, which is capacitively coupled to the resonator, provides a sensitive probe of the latter's position;back-action effects manifest themselves as an effective thermal bath, the properties of which depend sensitively on SSET bias conditions. Surprisingly, when the SSET is biased near a transport resonance, we observe cooling of the nanomechanical mode from 550mK to 300mK-- an effect that is analogous to laser cooling in atomic physics. Our measurements have implications for nanomechanical readout of quantum information devices and the limits of ultrasensitive force microscopy (such as single-nuclear-spin magnetic resonance force microscopy). Furthermore, we anticipate the use of these backaction effects to prepare ultracold and quantum states of mechanical structures, which would not be accessible with existing technology.
△ Less
Submitted 12 September, 2006;
originally announced September 2006.
