-
The $μ(I)$ model and extensions applied to granular material in silo with inserts
Authors:
Samuel K Irvine,
Luke A Fullard,
Daniel J Holland,
Daniel A Clarke,
Thomasin A Lynch,
Pierre-Yves Lagrée
Abstract:
Granular material is often handled using silos with inserts in industrial processes to prevent "rat-holing" and similar behaviour, optimise mixing behaviour, and prevent segregation. We study the mass flow rate and the static zones of granular silos using the $μ(I)$ rheology in the incompressible Navier-Stokes equations. We also extend the $μ(I)$ model to incorporate pseudo-dilatancy and nonlocal…
▽ More
Granular material is often handled using silos with inserts in industrial processes to prevent "rat-holing" and similar behaviour, optimise mixing behaviour, and prevent segregation. We study the mass flow rate and the static zones of granular silos using the $μ(I)$ rheology in the incompressible Navier-Stokes equations. We also extend the $μ(I)$ model to incorporate pseudo-dilatancy and nonlocal fluidity. We find that insert shape has a significant effect on flow rate and static material. We also find that the effect of inserts on flow rate is not strongly affected by the extensions, while the amount of static material is highly dependent on the interactions between insert shape and extensions. Finally, we find that the effect on flow rate varies with insert size, while the amount of static material is not significantly affected by increasing insert size. These results could provide important insights for optimising silo design.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Capturing the dynamics of a two orifice silo with the μ(I) model and extensions
Authors:
Samuel K Irvine,
Luke A Fullard,
Daniel J Holland,
Daniel A Clarke,
Thomasin A Lynch,
Pierre-Yves Lagrée
Abstract:
Granular material in a silo with two openings can display a `flow rate dip', where a non-monotonic relationship between flow rate and orifice separation occurs. In this paper we study continuum modelling of the silo with two openings. We find that the $μ(I)$ rheology can capture the flow rate dip if physically relevant friction parameters are used. We also extend the model by accounting for wall f…
▽ More
Granular material in a silo with two openings can display a `flow rate dip', where a non-monotonic relationship between flow rate and orifice separation occurs. In this paper we study continuum modelling of the silo with two openings. We find that the $μ(I)$ rheology can capture the flow rate dip if physically relevant friction parameters are used. We also extend the model by accounting for wall friction, dilatancy, and non-local effects. We find that accounting for the wall friction using a Hele-Shaw model better replicates the qualitative characteristics of the flow rate dip seen in experimental data, while dilatancy and non-local effects have very little effect on the qualitative characteristics of the mass flow rate dip. However, we find that all three of these factors have a significant impact on the mass flow rate, indicating that a continuum model which accurately predicts flow rate will need to account for these effects.
△ Less
Submitted 24 February, 2023; v1 submitted 4 October, 2022;
originally announced October 2022.
-
Frictional weakening induced by cohesion: the numerical case of cohesive granular failures
Authors:
Lydie Staron,
Laurent Duchemin,
Anais Abramian,
Pierre-Yves Lagrée
Abstract:
The failure of 2D numerical cohesive granular steps collapsing under gravity are simulated for a large range of cohesion. Focussing on the cumulative displacement of the grains, and defining a displacement threshold, we establish a sensible criterion for capturing the failure characteristics. We are able to locate the failure in time and to identify the different stages of the destabilisation. We…
▽ More
The failure of 2D numerical cohesive granular steps collapsing under gravity are simulated for a large range of cohesion. Focussing on the cumulative displacement of the grains, and defining a displacement threshold, we establish a sensible criterion for capturing the failure characteristics. We are able to locate the failure in time and to identify the different stages of the destabilisation. We find that the onset of the failure is delayed by increasing cohesion, but its duration becomes shorter. Defining a narrow displacement interval, a well-defined shear band revealing the failure comes out. Solving the equilibrium of the failing block, we are able to make successful predictions for the dependance between failure angle and cohesion, thereby disclosing two distinct frictional behaviour: while friction remains constant at small cohesion, it significantly decreases with cohesive properties at larger cohesion. The results hence reveal two regimes for the behaviour of cohesive granular matter depending on cohesion strength, revealing a cohesion-induced weakening mechanism.
△ Less
Submitted 31 March, 2022;
originally announced March 2022.
-
A pressure impulse theory for hemispherical liquid impact problems
Authors:
Julien Philippi,
Arnaud Antkowiak,
Pierre-Yves Lagrée
Abstract:
Liquid impact problems for hemispherical fluid domain are considered. By using the concept of pressure impulse we show that the solution of the flow induced by the impact is reduced to the derivation of Laplace's equation in spherical coordinates with Dirichlet and Neumann boundary conditions. The structure of the flow at the impact moment is deduced from the spherical harmonics representation of…
▽ More
Liquid impact problems for hemispherical fluid domain are considered. By using the concept of pressure impulse we show that the solution of the flow induced by the impact is reduced to the derivation of Laplace's equation in spherical coordinates with Dirichlet and Neumann boundary conditions. The structure of the flow at the impact moment is deduced from the spherical harmonics representation of the solution. In particular we show that the slip velocity has a logarithmic singularity at the contact line. The theoretical predictions are in very good agreement both qualitatively and quantitatively with the first time step of a numerical simulation with a Navier-Stokes solver named Gerris.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Algorithms for Online Influencer Marketing
Authors:
Paul Lagrée,
Olivier Cappé,
Bogdan Cautis,
Silviu Maniu
Abstract:
Influence maximization is the problem of finding influential users, or nodes, in a graph so as to maximize the spread of information. It has many applications in advertising and marketing on social networks. In this paper, we study a highly generic version of influence maximization, one of optimizing influence campaigns by sequentially selecting "spread seeds" from a set of influencers, a small su…
▽ More
Influence maximization is the problem of finding influential users, or nodes, in a graph so as to maximize the spread of information. It has many applications in advertising and marketing on social networks. In this paper, we study a highly generic version of influence maximization, one of optimizing influence campaigns by sequentially selecting "spread seeds" from a set of influencers, a small subset of the node population, under the hypothesis that, in a given campaign, previously activated nodes remain "persistently" active throughout and thus do not yield further rewards. This problem is in particular relevant for an important form of online marketing, known as influencer marketing, in which the marketers target a sub-population of influential people, instead of the entire base of potential buyers. Importantly, we make no assumptions on the underlying diffusion model and we work in a setting where neither a diffusion network nor historical activation data are available. We call this problem online influencer marketing with persistence (in short, OIMP). We first discuss motivating scenarios and present our general approach. We introduce an estimator on the influencers' remaining potential -- the expected number of nodes that can still be reached from a given influencer -- and justify its strength to rapidly estimate the desired value, relying on real data gathered from Twitter. We then describe a novel algorithm, GT-UCB, relying on upper confidence bounds on the remaining potential. We show that our approach leads to high-quality spreads on both simulated and real datasets, even though it makes almost no assumptions on the diffusion medium. Importantly, it is orders of magnitude faster than state-of-the-art influence maximization methods, making it possible to deal with large-scale online scenarios.
△ Less
Submitted 23 October, 2017; v1 submitted 17 February, 2017;
originally announced February 2017.
-
Low-Shapiro hydrostatic reconstruction technique for blood flow simulation in large arteries with varying geometrical and mechanical properties
Authors:
A. R. Ghigo,
O. Delestre,
J. -M. Fullana,
P. -Y. Lagrée
Abstract:
The purpose of this work is to construct a simple, efficient and accurate well-balanced numerical scheme for one-dimensional (1D) blood flow in large arteries with varying geometrical and mechanical properties. As the steady states at rest are not relevant for blood flow, we construct two well-balanced hydrostatic reconstruction techniques designed to preserve low-Shapiro number steady states that…
▽ More
The purpose of this work is to construct a simple, efficient and accurate well-balanced numerical scheme for one-dimensional (1D) blood flow in large arteries with varying geometrical and mechanical properties. As the steady states at rest are not relevant for blood flow, we construct two well-balanced hydrostatic reconstruction techniques designed to preserve low-Shapiro number steady states that may occur in large network simulations. The Shapiro number S h = u/c is the equivalent of the Froude number for shallow water equations and the Mach number for compressible Euler equations. The first is the low-Shapiro hydrostatic reconstruction (HR-LS), which is a simple and efficient method, inspired from the hydrostatic reconstruction technique (HR). The second is the subsonic hydrostatic reconstruction (HR-S), adapted here to blood flow and designed to exactly preserve all subcritical steady states. We systematically compare HR, HR-LS and HR-S in a series of single artery and arterial network numerical tests designed to evaluate their well-balanced and wave-capturing properties. The results indicate that HR is not adapted to compute blood flow in large arteries as it is unable to capture wave reflections and transmissions when large variations of the arteries' geometrical and mechanical properties are considered. On the contrary, HR-S is exactly well-balanced and is the most accurate hydrostatic reconstruction technique. However, HR-LS is able to compute low-Shapiro number steady states as well as wave reflections and transmissions with satisfying accuracy and is simpler and computationally less expensive than HR-S. We therefore recommend using HR-LS for 1D blood flow simulations in large arterial network simulations.
△ Less
Submitted 19 January, 2017;
originally announced January 2017.
-
One-dimensional Arterial Network Model for Bypass Grafts Assessment
Authors:
Arthur Ghigo,
Salam Abou Taam,
Xiaofei Wang,
Pierre-Yves Lagrée,
Jose-Maria Fullana
Abstract:
We propose an arterial network model based on 1D blood hemodynamic equations to study the behavior of different vascular surgical bypass grafts in case of an arterial occlusive pathology: an obliteration or stenosis of the iliac artery. We investigate the performances of three different bypass grafts (Aorto-Femoral, Axillo-Femoral and cross-over Femoral) depending on the degree of obliteration of…
▽ More
We propose an arterial network model based on 1D blood hemodynamic equations to study the behavior of different vascular surgical bypass grafts in case of an arterial occlusive pathology: an obliteration or stenosis of the iliac artery. We investigate the performances of three different bypass grafts (Aorto-Femoral, Axillo-Femoral and cross-over Femoral) depending on the degree of obliteration of the stenosis. Numerical simulations show that all bypass grafts are efficient since we retrieve in all cases the normal hemodynamics in the stenosed region while ensuring at the same time a global healthy circulation. We analyze in particular the Axillo-Femoral bypass graft by performing hundreds of simulations by varying the values of the Young's modulus [0.1--50 MPa] and the radius [0.01--5 cm] of the bypass graft. We show that the Young's modulus and radius of commercial bypass grafts are optimal in terms of hemodynamic considerations. The numerical findings prove that this approach could be used to optimize or plan surgeries for specific patients, to perform parameter's statistics and error propagation evaluations by running extensive simulations, or to characterize numerically specific bypass grafts.
△ Less
Submitted 28 November, 2016;
originally announced November 2016.
-
Modeling rain-driven overland flow: empirical versus analytical friction terms in the shallow water approximation
Authors:
G. Kirstetter,
J. Hu,
O. Delestre,
F. Darboux,
P. -Y. Lagrée,
S. Popinet,
J. -M. Fullana,
C. Josserand
Abstract:
Modeling and simulating overland flow fed by rainfall is a common issue in watershed surface hydrology. Modelers have to choose among various friction models when defining their simulation framework. The purpose of this work is to compare the simulation quality for the Manning, Darcy-Weisbach, and Poiseuille friction models on the simple case of a constant rain on a thin experimental flume. Result…
▽ More
Modeling and simulating overland flow fed by rainfall is a common issue in watershed surface hydrology. Modelers have to choose among various friction models when defining their simulation framework. The purpose of this work is to compare the simulation quality for the Manning, Darcy-Weisbach, and Poiseuille friction models on the simple case of a constant rain on a thin experimental flume. Results show that the usual friction law of Manning is not suitable for this type of flow. The Poiseuille friction model gave the best results both on the flux at the outlet and the velocity and depth profile along the flume. The Darcy-Weisbach model shows good results for laminar flow. Additional testing should be carried out for turbulent cases.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Linear and nonlinear viscoelastic arterial wall models: application on animals
Authors:
Arthur Ghigo,
Xiao-Fei Wang,
Ricardo Armentano,
Pierre-Yves Lagrée,
Jose-Maria Fullana
Abstract:
This work deals with the viscoelasticity of the arterial wall and its influence on the pulse waves. We describe the viscoelasticity by a non-linear Kelvin-Voigt model in which the coefficients are fitted using experimental time series of pressure and radius measured on a sheep's arterial network. We obtained a good agreement between the results of the nonlinear Kelvin-Voigt model and the experimen…
▽ More
This work deals with the viscoelasticity of the arterial wall and its influence on the pulse waves. We describe the viscoelasticity by a non-linear Kelvin-Voigt model in which the coefficients are fitted using experimental time series of pressure and radius measured on a sheep's arterial network. We obtained a good agreement between the results of the nonlinear Kelvin-Voigt model and the experimental measurements. We found that the viscoelastic relaxation time-defined by the ratio between the viscoelastic coefficient and the Young's modulus-is nearly constant throughout the network. Therefore, as it is well known that smaller arteries are stiffer, the viscoelastic coefficient rises when approaching the peripheral sites to compensate the rise of the Young's modulus, resulting in a higher damping effect. We incorporated the fitted viscoelastic coefficients in a nonlinear 1D fluid model to compute the pulse waves in the network. The damping effect of viscoelasticity on the high frequency waves is clear especially at the peripheral sites.
△ Less
Submitted 27 July, 2016;
originally announced July 2016.
-
Towards a new friction model for shallow water equations through an interactive viscous layer
Authors:
François James,
Pierre-Yves Lagrée,
Hoang-Minh Le,
Mathilde Legrand
Abstract:
The derivation of shallow water models from Navier-Stokes equations is revisited yielding a class of two-layer shallow water models.An improved velocity profile is proposed, based on the superposition of an ideal fluid and a viscous layer inspired by the Interactive Boundary Layer interaction used in aeronautics. This leads to a new friction law which depends not only on velocity and depth but o…
▽ More
The derivation of shallow water models from Navier-Stokes equations is revisited yielding a class of two-layer shallow water models.An improved velocity profile is proposed, based on the superposition of an ideal fluid and a viscous layer inspired by the Interactive Boundary Layer interaction used in aeronautics. This leads to a new friction law which depends not only on velocity and depth but of the variations of velocity and thickness of boundary layer. The resulting system is an extended shallow water model consisting of three depth-integrated equations: the first two are mass and momentum conservation in which a slight correction on hydrostatic pressure has been made; the third one, known as von Karman equation, describes the evolution of the viscous layer. This coupled model is shown to be conditionally hyperbolic, and a Godunov-type finite volume scheme is also proposed. Several numerical examples are provided and compared to the "Multi-Layer Saint-Venant" model. They emphasize the ability of the model to deal with unsteady viscous effects. They illustrate also the phase-lag between friction and topography, and even recover possible reverse flows.
△ Less
Submitted 8 June, 2018; v1 submitted 4 July, 2016;
originally announced July 2016.
-
Multiple-Play Bandits in the Position-Based Model
Authors:
Paul Lagrée,
Claire Vernade,
Olivier Cappé
Abstract:
Sequentially learning to place items in multi-position displays or lists is a task that can be cast into the multiple-play semi-bandit setting. However, a major concern in this context is when the system cannot decide whether the user feedback for each item is actually exploitable. Indeed, much of the content may have been simply ignored by the user. The present work proposes to exploit available…
▽ More
Sequentially learning to place items in multi-position displays or lists is a task that can be cast into the multiple-play semi-bandit setting. However, a major concern in this context is when the system cannot decide whether the user feedback for each item is actually exploitable. Indeed, much of the content may have been simply ignored by the user. The present work proposes to exploit available information regarding the display position bias under the so-called Position-based click model (PBM). We first discuss how this model differs from the Cascade model and its variants considered in several recent works on multiple-play bandits. We then provide a novel regret lower bound for this model as well as computationally efficient algorithms that display good empirical and theoretical performance.
△ Less
Submitted 8 June, 2016;
originally announced June 2016.
-
Sequential ranking under random semi-bandit feedback
Authors:
Hossein Vahabi,
Paul Lagrée,
Claire Vernade,
Olivier Cappé
Abstract:
In many web applications, a recommendation is not a single item suggested to a user but a list of possibly interesting contents that may be ranked in some contexts. The combinatorial bandit problem has been studied quite extensively these last two years and many theoretical results now exist : lower bounds on the regret or asymptotically optimal algorithms. However, because of the variety of situa…
▽ More
In many web applications, a recommendation is not a single item suggested to a user but a list of possibly interesting contents that may be ranked in some contexts. The combinatorial bandit problem has been studied quite extensively these last two years and many theoretical results now exist : lower bounds on the regret or asymptotically optimal algorithms. However, because of the variety of situations that can be considered, results are designed to solve the problem for a specific reward structure such as the Cascade Model. The present work focuses on the problem of ranking items when the user is allowed to click on several items while scanning the list from top to bottom.
△ Less
Submitted 26 May, 2016; v1 submitted 4 March, 2016;
originally announced March 2016.
-
Fluid friction and wall viscosity of the 1D blood flow model
Authors:
Xiao-Fei Wang,
Shohei Nishi,
Mami Matsukawa,
Arthur Ghigo,
Pierre-Yves Lagrée,
Jose-Maria Fullana
Abstract:
We study the behavior of the pulse waves of water into a flexible tube for application to blood flow simulations. In pulse waves both fluid friction and wall viscosity are damping factors, and difficult to evaluate separately. In this paper, the coefficients of fluid friction and wall viscosity are estimated by fitting a nonlinear 1D flow model to experimental data. In the experimental setup,…
▽ More
We study the behavior of the pulse waves of water into a flexible tube for application to blood flow simulations. In pulse waves both fluid friction and wall viscosity are damping factors, and difficult to evaluate separately. In this paper, the coefficients of fluid friction and wall viscosity are estimated by fitting a nonlinear 1D flow model to experimental data. In the experimental setup, a distensible tube is connected to a piston pump at one end and closed at another end. The pressure and wall displacements are measured simultaneously. A good agreement between model predictions and experiments was achieved. For amplitude decrease, the effect of wall viscosity on the pulse wave has been shown as important as that of fluid viscosity.
△ Less
Submitted 15 November, 2015;
originally announced November 2015.
-
On the front shape of an inertial granular flow down a rough incline
Authors:
G Saingier,
S Deboeuf,
P. -Y Lagrée
Abstract:
Granular material flowing on complex topographies are ubiquitous in industrial and geophysical situations. In this paper, we study the small-scale model of a granular layer flowing on a rough incline. The shape of a granular front is solved analytically by using a 1D Savage-Hutter's model based on depth-averaged mass and momentum equations with the fractional expression for the frictional rheology…
▽ More
Granular material flowing on complex topographies are ubiquitous in industrial and geophysical situations. In this paper, we study the small-scale model of a granular layer flowing on a rough incline. The shape of a granular front is solved analytically by using a 1D Savage-Hutter's model based on depth-averaged mass and momentum equations with the fractional expression for the frictional rheology $μ(I)$. Unlike previous studies where a "plug flow" is assumed, a free shape factor $α$ describing the vertical velocity profile, is taken into account to determine the solution. Such a way, we put in evidence an effect of inertia through the Froude number Fr and the shape factor $α$ on the front profile. The analytical predictions are compared with experimental results published by [O. Pouliquen, Phys. Fluids 11, 1956 (1999)] and with our new experimental data obtained at higher Froude numbers. A good agreement between theory and experiments is found when $α$ = 5/4 is used in our model, corresponding to a Bagnold-like velocity profile. However, open questions are raised about the vertical velocity profile in granular flows and about the expression of the rheological function $μ(I)$ and its calibration from experimental data.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
A shallow water with variable pressure model for blood flow simulation
Authors:
Olivier Delestre,
Arthur Ghigo,
Jose-Maria Fullana,
Pierre-Yves Lagrée
Abstract:
We performed numerical simulations of blood flow in arteries with a variable stiffness and cross-section at rest using a finite volume method coupled with a hydrostatic reconstruction of the variables at the interface of each mesh cell. The method was then validated on examples taken from the literature. Asymptotic solutions were computed to highlight the effect of the viscous and viscoelastic sou…
▽ More
We performed numerical simulations of blood flow in arteries with a variable stiffness and cross-section at rest using a finite volume method coupled with a hydrostatic reconstruction of the variables at the interface of each mesh cell. The method was then validated on examples taken from the literature. Asymptotic solutions were computed to highlight the effect of the viscous and viscoelastic source terms. Finally, the blood flow was computed in an artery where the cross-section at rest and the stiffness were varying. In each test case, the hydrostatic reconstruction showed good results where other simpler schemes did not, generating spurious oscillations andnonphysical velocities.
△ Less
Submitted 13 September, 2015; v1 submitted 7 September, 2015;
originally announced September 2015.
-
A Network-Aware Approach for Searching As-You-Type in Social Media (Extended Version)
Authors:
Paul Lagrée,
Bogdan Cautis,
Hossein Vahabi
Abstract:
We present in this paper a novel approach for as-you-type top-$k$ keyword search over social media. We adopt a natural "network-aware" interpretation for information relevance, by which information produced by users who are closer to the seeker is considered more relevant. In practice, this query model poses new challenges for effectiveness and efficiency in online search, even when a complete que…
▽ More
We present in this paper a novel approach for as-you-type top-$k$ keyword search over social media. We adopt a natural "network-aware" interpretation for information relevance, by which information produced by users who are closer to the seeker is considered more relevant. In practice, this query model poses new challenges for effectiveness and efficiency in online search, even when a complete query is given as input in one keystroke. This is mainly because it requires a joint exploration of the social space and classic IR indexes such as inverted lists. We describe a memory-efficient and incremental prefix-based retrieval algorithm, which also exhibits an anytime behavior, allowing to output the most likely answer within any chosen running-time limit. We evaluate it through extensive experiments for several applications and search scenarios, including searching for posts in micro-blogging (Twitter and Tumblr), as well as searching for businesses based on reviews in Yelp. They show that our solution is effective in answering real-time as-you-type searches over social media.
△ Less
Submitted 29 July, 2015;
originally announced July 2015.
-
Drop impact on a solid surface: short time self-similarity
Authors:
Julien Philippi,
Pierre-Yves Lagrée,
Arnaud Antkowiak
Abstract:
The early stages of drop impact onto a solid surface are considered. Detailed numerical simulations and detailed asymptotic analysis of the process reveal a self-similar structure both for the velocity field and the pressure field. The latter is shown to exhibit a maximum not near the impact point, but rather at the contact line. The motion of the contact line is furthermore shown to exhibit a 'ta…
▽ More
The early stages of drop impact onto a solid surface are considered. Detailed numerical simulations and detailed asymptotic analysis of the process reveal a self-similar structure both for the velocity field and the pressure field. The latter is shown to exhibit a maximum not near the impact point, but rather at the contact line. The motion of the contact line is furthermore shown to exhibit a 'tank treading' motion. These observations are apprehended at the light of a variant of Wagner theory for liquid impact. This framework offers a simple analogy where the fluid motion within the impacting drop may be viewed as the flow induced by a flat rising expanding disk. The theoretical predictions are found to be in very close agreement both qualitatively and quantitatively with the numerical observations for about three decades in time. Interestingly the inviscid self-similar impact pressure and velocities are shown to depend solely on the self-similar variables $(r/\sqrt{t},z/\sqrt{t})$. The structure of the boundary layer developing along the wet substrate is investigated as well, and is proven to be formally analogous to that of the boundary layer growing in the trail of a shockwave. Interestingly, the boundary layer structure only depends on the impact self-similar variables. This allows to construct a seamless uniform analytical solution encompassing both impact and viscous effects. The depiction of the different dynamical fields enables to quantitatively predict observables of interest, such as the evolution of the integral viscous shearing force and of the net normal force.
△ Less
Submitted 22 April, 2015;
originally announced April 2015.
-
Continuum simulation of the discharge of the granular silo: a validation test for the mu(I)-visco-plastic flow law
Authors:
L. Staron,
P. -Y. Lagrée,
S. Popinet
Abstract:
Using both a continuum Navier-Stokes solver, with the mu(I)-flow-law implemented to model the viscous behavior, and the discrete Contact Dynamics algorithm, the discharge of granular silos is simulated in two dimensions from the early stages of the discharge until complete release of the material. In both cases, the Beverloo scaling is recovered. We first do not attempt quantitative comparison, bu…
▽ More
Using both a continuum Navier-Stokes solver, with the mu(I)-flow-law implemented to model the viscous behavior, and the discrete Contact Dynamics algorithm, the discharge of granular silos is simulated in two dimensions from the early stages of the discharge until complete release of the material. In both cases, the Beverloo scaling is recovered. We first do not attempt quantitative comparison, but focus on the qualitative behavior of velocity and pressure at different locations in the flow. A good agreement is obtained in the regions of rapid flows, while areas of slow creep are not entirely captured by the continuum model. The pressure field shows a general good agreement. The evolution of the free surface implies differences, however, the bulk deformation is essentially identical in both approaches. The influence of the parameters of the mu(I)-flow-law is systematically investigated, showing the importance of the dependence on the inertial number I to achieve quantitative agreement between continuum and discrete discharge. The general ability of the continuum model to reproduce qualitatively the granular behavior is found to be very encouraging.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
Verification and comparison of four numerical schemes for a 1D viscoelastic blood flow model
Authors:
Xiaofei Wang,
Jose-Maria Fullana,
Pierre-Yves Lagrée
Abstract:
A reliable and fast numerical scheme is crucial for the 1D simulation of blood flow in compliant vessels. In this paper, a 1D blood flow model is incorporated with a Kelvin-Voigt viscoelastic arterial wall. This leads to a nonlinear hyperbolic-parabolic system, which is then solved with four numerical schemes, namely: MacCormack, Taylor-Galerkin, MUSCL (monotonic upwind scheme for conservation law…
▽ More
A reliable and fast numerical scheme is crucial for the 1D simulation of blood flow in compliant vessels. In this paper, a 1D blood flow model is incorporated with a Kelvin-Voigt viscoelastic arterial wall. This leads to a nonlinear hyperbolic-parabolic system, which is then solved with four numerical schemes, namely: MacCormack, Taylor-Galerkin, MUSCL (monotonic upwind scheme for conservation law) and local discontinuous Galerkin. The numerical schemes are tested on a single vessel, a simple bifurcation and a network with 55 arteries. The numerical solutions are checked favorably against analytical, semi-analytical solutions or clinical observations. Among the numerical schemes, comparisons are made in four important aspects: accuracy, ability to capture shock-like phenomena, computational speed and implementation complexity. The suitable conditions for the application of each scheme are discussed.
△ Less
Submitted 16 September, 2014; v1 submitted 22 February, 2013;
originally announced February 2013.
-
The granular silo as a continuum plastic flow: the hour-glass vs the clepsydra
Authors:
Lydie Staron,
Pierre-Yves Lagrée,
Stéphane Popinet
Abstract:
The granular silo is one of the many interesting illustrations of the thixotropic property of granular matter: a rapid flow develops at the outlet, propagating upwards through a dense shear flow while material at the bottom corners of the container remains static. For large enough outlets, the discharge flow is continuous; however, by contrast with the clepsydra for which the flow velocity depends…
▽ More
The granular silo is one of the many interesting illustrations of the thixotropic property of granular matter: a rapid flow develops at the outlet, propagating upwards through a dense shear flow while material at the bottom corners of the container remains static. For large enough outlets, the discharge flow is continuous; however, by contrast with the clepsydra for which the flow velocity depends on the height of fluid left in the container, the discharge rate of granular silos is constant. Implementing a plastic rheology in a 2D Navier-Stokes solver (following the mu(I)-rheology or a constant friction), we simulate the continuum counterpart of the granular silo. Doing so, we obtain a constant flow rate during the discharge and recover the Beverloo scaling independently of the initial filling height of the silo. We show that lowering the value of the coefficient of friction leads to a transition toward a different behavior, similar to that of a viscous fluid, and where the filling height becomes active in the discharge process. The pressure field shows that large enough values of the coefficient of friction ($\simeq$ 0.3) allow for a low-pressure cavity to form above the outlet, and can thus explain the Beverloo scaling. In conclusion, the difference between the discharge of a hourglass and a clepsydra seems to reside in the existence or not of a plastic yield stress.
△ Less
Submitted 26 November, 2012;
originally announced November 2012.
-
A "well-balanced" finite volume scheme for blood flow simulation
Authors:
Olivier Delestre,
Pierre-Yves Lagrée
Abstract:
We are interested in simulating blood flow in arteries with a one dimensional model. Thanks to recent developments in the analysis of hyperbolic system of conservation laws (in the Saint-Venant/ shallow water equations context) we will perform a simple finite volume scheme. We focus on conservation properties of this scheme which were not previously considered. To emphasize the necessity of this s…
▽ More
We are interested in simulating blood flow in arteries with a one dimensional model. Thanks to recent developments in the analysis of hyperbolic system of conservation laws (in the Saint-Venant/ shallow water equations context) we will perform a simple finite volume scheme. We focus on conservation properties of this scheme which were not previously considered. To emphasize the necessity of this scheme, we present how a too simple numerical scheme may induce spurious flows when the basic static shape of the radius changes. On contrary, the proposed scheme is "well-balanced": it preserves equilibria of Q = 0. Then examples of analytical or linearized solutions with and without viscous damping are presented to validate the calculations. The influence of abrupt change of basic radius is emphasized in the case of an aneurism.
△ Less
Submitted 28 May, 2012;
originally announced May 2012.
-
A well-balanced finite volume scheme for 1D hemodynamic simulations
Authors:
Olivier Delestre,
Pierre-Yves Lagrée
Abstract:
We are interested in simulating blood flow in arteries with variable elasticity with a one dimensional model. We present a well-balanced finite volume scheme based on the recent developments in shallow water equations context. We thus get a mass conservative scheme which also preserves equilibria of Q=0. This numerical method is tested on analytical tests.
We are interested in simulating blood flow in arteries with variable elasticity with a one dimensional model. We present a well-balanced finite volume scheme based on the recent developments in shallow water equations context. We thus get a mass conservative scheme which also preserves equilibria of Q=0. This numerical method is tested on analytical tests.
△ Less
Submitted 10 January, 2012; v1 submitted 31 August, 2011;
originally announced August 2011.
-
Modelling the human pharyngeal airway: validation of numerical simulations using in vitro experiments
Authors:
Franz Chouly,
Annemie Van Hirtum,
Pierre-Yves Lagrée,
Xavier Pelorson,
Yohan Payan
Abstract:
In the presented study, a numerical model which predicts the flow-induced collapse within the pharyngeal airway is validated using in vitro measurements. Theoretical simplifications were considered to limit the computation time. Systematic comparisons between simulations and measurements were performed on an in vitro replica, which reflects asymmetries of the geometry and of the tissue propertie…
▽ More
In the presented study, a numerical model which predicts the flow-induced collapse within the pharyngeal airway is validated using in vitro measurements. Theoretical simplifications were considered to limit the computation time. Systematic comparisons between simulations and measurements were performed on an in vitro replica, which reflects asymmetries of the geometry and of the tissue properties at the base of the tongue and in pathological conditions (strong initial obstruction). First, partial obstruction is observed and predicted. Moreover, the prediction accuracy of the numerical model is of 4.2% concerning the deformation (mean quadratic error on the constriction area). It shows the ability of the assumptions and method to predict accurately and quickly a fluid-structure interaction.
△ Less
Submitted 26 November, 2008;
originally announced November 2008.
-
Reproduction of hypopnea phenomenon using a physical and numerical model
Authors:
Franz Chouly,
Annemie Van Hirtum,
Pierre-Yves Lagrée,
Xavier Pelorson,
Yohan Payan
Abstract:
Obstructive sleep apnea syndrome is now considered as a major health care topic. An in-vitro setup which reproduces and simplifies upper airway geometry has been the basis to study the fluid/walls interaction that leads to an apnea. It consists of a rigid pipe (the pharynx) in contact with a deformable latex cylinder filled with water (the tongue). Air flows out of the rigid pipe and induces pre…
▽ More
Obstructive sleep apnea syndrome is now considered as a major health care topic. An in-vitro setup which reproduces and simplifies upper airway geometry has been the basis to study the fluid/walls interaction that leads to an apnea. It consists of a rigid pipe (the pharynx) in contact with a deformable latex cylinder filled with water (the tongue). Air flows out of the rigid pipe and induces pressure forces on the cylinder. We present a numerical model of this setup: a finite element model of the latex cylinder is in interaction with a fluid model. Simulation of an hypopnea (partial collapsus of the airway) has been possible and in agreement with observations from the in-vitro setup. The same phenomenon has been simulated on a soft palate model obtained from a patient sagittal radiography. These first results encourage us to improve the model so as it could reproduce the complete apnea phenomenon, and be used for a planification purpose in sleep apnea surgery.
△ Less
Submitted 23 October, 2006;
originally announced October 2006.
-
Granular Pressure and the Thickness of a Layer Jamming on a Rough Incline
Authors:
Christophe Josserand,
Pierre-Yves Lagrée,
Daniel Lhuillier
Abstract:
Dense granular media have a compaction between the random loose and random close packings. For these dense media the concept of a granular pressure depending on compaction is not unanimously accepted because they are often in a "frozen" state which prevents them to explore all their possible microstates, a necessary condition for defining a pressure and a compressibility unambiguously. While per…
▽ More
Dense granular media have a compaction between the random loose and random close packings. For these dense media the concept of a granular pressure depending on compaction is not unanimously accepted because they are often in a "frozen" state which prevents them to explore all their possible microstates, a necessary condition for defining a pressure and a compressibility unambiguously. While periodic tapping or cyclic fluidization have already being used for that exploration, we here suggest that a succession of flowing states with velocities slowly decreasing down to zero can also be used for that purpose. And we propose to deduce the pressure in \emph{dense and flowing} granular media from experiments measuring the thickness of the granular layer that remains on a rough incline just after the flow has stopped.
△ Less
Submitted 6 June, 2005;
originally announced June 2005.
-
Stationary shear flows of dense granular materials : a tentative continuum modelling
Authors:
Christophe Josserand,
Pierre-Yves Lagree,
Daniel Lhuillier
Abstract:
We propose a simple continuum model to interpret the shearing motion of dense, dry and cohesion-less granular media. Compressibility, dilatancy and Coulomb-like friction are the three basic ingredients. The granular stress is split into a rate-dependent part representing the rebound-less impacts between grains and a rate-independent part associated with long-lived contacts. Because we consider s…
▽ More
We propose a simple continuum model to interpret the shearing motion of dense, dry and cohesion-less granular media. Compressibility, dilatancy and Coulomb-like friction are the three basic ingredients. The granular stress is split into a rate-dependent part representing the rebound-less impacts between grains and a rate-independent part associated with long-lived contacts. Because we consider stationary flows only, the grain compaction and the grain velocity are the two main variables. The predicted velocity and compaction profiles are in apparent agreement with the experimental or numerical results concerning free-surface shear flows as well as confined shear flows
△ Less
Submitted 20 January, 2004;
originally announced January 2004.
