Showing 1–6 of 6 results for author: Kurtz, R J

Grain boundary phases in bcc metals

Authors: T. Frolov, W. Setyawan, R. J. Kurtz, J. Marian, A. R. Oganov, R. E. Rudd, Q. Zhu

Abstract: We report a computational discovery of novel grain boundary structures and multiple grain boundary phases in elemental bcc tungsten. While grain boundary structures created by the γ-surface method as a union of two perfect half crystals have been studied extensively, it is known that the method has limitations and does not always predict the correct ground states. Here, we use a newly developed co… ▽ More We report a computational discovery of novel grain boundary structures and multiple grain boundary phases in elemental bcc tungsten. While grain boundary structures created by the γ-surface method as a union of two perfect half crystals have been studied extensively, it is known that the method has limitations and does not always predict the correct ground states. Here, we use a newly developed computational tool, based on evolutionary algorithms, to perform a grand-canonical search of a high-angle symmetric tilt boundary in tungsten, and we find new ground states and multiple phases that cannot be described using the conventional structural unit model. We use MD simulations to demonstrate that the new structures can coexist at finite temperature in a closed system, confirming these are examples of different GB phases. The new ground state is confirmed by first-principles calculations. △ Less

Submitted 17 November, 2017; originally announced November 2017.

Comments: 19 pages, 6 figures

Object Kinetic Monte Carlo Simulations of Radiation Damage in Bulk Tungsten Part-II: With a PKA Spectrum Corresponding to 14-MeV Neutrons

Authors: Giridhar Nandipati, Wahyu Setyawan, Howard L. Heinisch, Kenneth J. Roche, Richard J. Kurtz, Brian D. Wirth

Abstract: Object kinetic Monte Carlo was employed to study the effect of dose rate on the evolution of vacancy microstructure in polycrystalline tungsten under neutron bombardment. The evolution was followed up to 1.0 displacement per atom (dpa) with point defects generated in accordance with a primary knock-on atom (PKA) spectrum corresponding to 14-MeV neutrons. The present study includes the effect of gr… ▽ More Object kinetic Monte Carlo was employed to study the effect of dose rate on the evolution of vacancy microstructure in polycrystalline tungsten under neutron bombardment. The evolution was followed up to 1.0 displacement per atom (dpa) with point defects generated in accordance with a primary knock-on atom (PKA) spectrum corresponding to 14-MeV neutrons. The present study includes the effect of grain size (2.0 and 4.0 $μ$m) but excludes the impact of transmutation or pre-existing defects beyond grain boundary sinks. Vacancy cluster density increases with dose rate, while the density of vacancies decreases. Consequently, the average vacancy cluster size and the fraction of vacancies in visible clusters decrease with increasing dose rate. The density of vacancies and vacancy clusters decrease with grain size such that the average size of the clusters remains similar. However, the average size is larger for larger grains at dose rates < 4.5 x 10-7 dpa/s. The trend of vacancy accumulation as a function of dose, dose rate, and grain size is similar to that obtained with the High Flux Isotope Reactor (HFIR) PKA spectrum. However, the amount of vacancy accumulation and the vacancy microstructure are quite different. Compared to the HFIR case, we find that even though the dose rates are 2.5 times higher, the density of vacancies and the average vacancy cluster sizes are lower. In addition, a void lattice forms only for the lowest two dose rates (4.5 x 10-8 and 4.5 x 10-9 dpa/s). In contrast, a void lattice formed at all dose rates studied using the HFIR PKA spectrum. We discuss in detail the factors that lead to these different microstructures. △ Less

Submitted 3 June, 2016; originally announced June 2016.

Object Kinetic Monte Carlo Simulations of Radiation Damage in Neutron-Irradiated Tungsten Part-I: Neutron Flux with a PKA Spectrum Corresponding to the High-flux Isotope Reactor

Authors: Giridhar Nandipati, Wahyu Setyawana, Howard L. Heinisch, Kenneth J. Roche, Richard J. Kurtz, Brian D. Wirth

Abstract: Object kinetic Monte Carlo simulations were performed to study the impact of varying dose rate and grain size up to a dose of 1.0 dpa in pure, polycrystalline tungsten, subjected to a neutron irradiation having a PKA spectrum corresponding to the High Flux Isotope Reactor. The present study models defect cluster accumulation in tungsten, but does not consider the impact of transmutation or pre-exi… ▽ More Object kinetic Monte Carlo simulations were performed to study the impact of varying dose rate and grain size up to a dose of 1.0 dpa in pure, polycrystalline tungsten, subjected to a neutron irradiation having a PKA spectrum corresponding to the High Flux Isotope Reactor. The present study models defect cluster accumulation in tungsten, but does not consider the impact of transmutation or pre-existing defects beyond the grain boundary sinks, with varying grain size. With increasing dose rate, the vacancy cluster density increases, while the number density of vacancies decreases. Accordingly, the average vacancy cluster size and the fraction of vacancies that are part of visible clusters decreases with increasing dose rate. With increasing grain size, both the number densities of vacancies and vacancy clusters decrease, while both the fraction of vacancies in visible clusters and the average vacancy cluster size increase. This is caused by the pseudo-ripening of the vacancy clusters due to the longer-lived self-interstitial clusters in larger grains. The spatial ordering of vacancy clusters along {110} planes was observed for both grain sizes and all dose rates studied. Interplanar spacing increases with grain size; however, no clear dependence on dose or dose rate was observed. The results of this study show that 1D diffusion of self-interstitial clusters, while necessary, is not sufficient to form a void lattice, and that the diffusion of vacancies is also required. A methodology is suggested for choosing the simulation box dimensions so as to represent more faithfully the effects of one-dimensional migrating self-interstitial-atom clusters. △ Less

Submitted 25 March, 2016; v1 submitted 9 October, 2015; originally announced October 2015.

Cascade morphology transition in bcc metals

Authors: Wahyu Setyawan, Aaron P. Selby, Niklas Juslin, Roger E. Stoller, Brian D. Wirth, Richard J. Kurtz

Abstract: Energetic atom collisions in solids induce shockwaves with complex morphologies. In this paper, we establish the existence of a morphological transition in such cascades. The order parameter of the morphology is defined as the exponent, $b$, in the defect production curve as a function of cascade energy ($N_F \sim E_{MD}^b$). Response of different bcc metals can be compared in a consistent energy… ▽ More Energetic atom collisions in solids induce shockwaves with complex morphologies. In this paper, we establish the existence of a morphological transition in such cascades. The order parameter of the morphology is defined as the exponent, $b$, in the defect production curve as a function of cascade energy ($N_F \sim E_{MD}^b$). Response of different bcc metals can be compared in a consistent energy domain when the energy is normalized by the transition energy, $μ$, between the high- and the low-energy regime. Using Cr, Fe, Mo and W data, an empirical formula of $μ$ as a function of displacement threshold energy, $E_d$, is presented for bcc metals. △ Less

Submitted 23 December, 2014; originally announced December 2014.

Comments: 7 pages, 6 figures

Displacement cascades and defects annealing in tungsten, Part I: defect database from molecular dynamics simulations

Authors: Wahyu Setyawan, Giridhar Nandipati, Kenneth J. Roche, Howard L. Heinisch, Brian D. Wirth, Richard J. Kurtz

Abstract: Molecular dynamics simulations have been used to generate a comprehensive database of surviving defects due to displacement cascades in bulk tungsten. Twenty one data points of primary knock-on atom (PKA) energies ranging from 100 eV (sub-threshold energy) to 100 keV ($\sim$780$\times E_d$, where $E_d$ is the average displacement threshold energy) have been completed at 300 K, 1025 K and 2050 K. W… ▽ More Molecular dynamics simulations have been used to generate a comprehensive database of surviving defects due to displacement cascades in bulk tungsten. Twenty one data points of primary knock-on atom (PKA) energies ranging from 100 eV (sub-threshold energy) to 100 keV ($\sim$780$\times E_d$, where $E_d$ is the average displacement threshold energy) have been completed at 300 K, 1025 K and 2050 K. Within this range of PKA energies, two regimes of power-law energy-dependence of the defect production are observed. A distinct power-law exponent characterizes the number of Frenkel pairs produced within each regime. The two regimes intersect at a transition energy which occurs at approximately 250$\times E_d$. The transition energy also marks the onset of the formation of large self-interstitial atom (SIAs) clusters (size 14 or more). The observed defect clustering behavior is asymmetric, with SIA clustering increasing with temperature, while the vacancy clustering decreases. This asymmetry increases with temperature such that at 2050 K ($\sim 0.5 T_m$) practically no large vacancy clusters are formed, meanwhile large SIA clusters appear in all simulations. The implication of such asymmetry on the long-term defect survival and damage accumulation is discussed. In addition, rare $<$100$>${110} SIA loops are observed. △ Less

Submitted 25 April, 2014; originally announced April 2014.

Comments: 10 pages, 6 figures

Displacement cascades and defects annealing in tungsten, Part II: Object kinetic Monte Carlo Simulation of Tungsten Cascade Aging

Authors: Giridhar Nandipati, Wahyu Setyawan, Howard L. Heinisch, Kenneth J. Roche, Richard J. Kurtz, Brian D. Wirth

Abstract: We describe the results of object kinetic Monte Carlo (OKMC) simulations of the annealing of primary cascade damage in bulk tungsten using a comprehensive database of cascades obtained from molecular dynamics [1] as a function of primary knock-on atom (PKA) energy and direction, and temperatures of 300, 1025 and 2050 K. An increase in SIA clustering but decrease in vacancy clustering with temperat… ▽ More We describe the results of object kinetic Monte Carlo (OKMC) simulations of the annealing of primary cascade damage in bulk tungsten using a comprehensive database of cascades obtained from molecular dynamics [1] as a function of primary knock-on atom (PKA) energy and direction, and temperatures of 300, 1025 and 2050 K. An increase in SIA clustering but decrease in vacancy clustering with temperature combined with disparate mobilities of SIAs versus vacancies causes an interesting temperature effect on cascade annealing, which is quite different from what one would expect. The annealing efficiency (ratio of number of defects after and before annealing) exhibits an inverse U-shape curve as a function of temperature. In addition, we will also describe the capabilities of our newly developed OKMC code; KSOME (kinetic simulations of microstructure evolution) used to carryout these simulations △ Less

Submitted 21 April, 2014; originally announced April 2014.