Microstructural Characterization and Mechanical Property Evaluation of High Nitrogen Martensitic Stainless Steel Subjected to Heat Treatment
Authors:
Harish Singh Dhami,
Nellori Dileep Kumar,
Thomas Tharian,
Chakravarthy P,
Koushik Viswanathan
Abstract:
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite has been reduced after sub-zero treatment as revealed by microstructural evolution. The material was subsequently tempered at different temperatures ranging from…
▽ More
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite has been reduced after sub-zero treatment as revealed by microstructural evolution. The material was subsequently tempered at different temperatures ranging from 180$^\circ$C to 650$^\circ$C and the change in micro-structure, hardness, tensile strength and toughness were investigated after each heat treatment cycle. Optical microscopy, electron microscopy with EDS and X-Ray diffraction techniques were used to characterize the material. This has showed the constituents of microstructure were lath martensite, precipitated metal carbides of type $M_{23}C_6$, $M_7C_6$ and carbo-nitrides. Hardness, tensile testing and Charpy impact testing were carried to evaluate mechanical properties after the heat treatment which has showed the better mechanical properties for the samples solutionised at 1075$^\circ$C. Secondary hardening has been observed on tempering above 450$^\circ$C which can be attributed to the precipitation of secondary phase inter-metallic compounds. Hardness attains a peak value at peculiar temperature range after which it decreases on further tempering which is most likely because of the loss of coherency of the precipitates with the metal matrix. This has been further confirmed by the XRD of the specimens before and after tempering. The study stablishes the structure-property correlation of HNMS for different heat treatment cycles. The results indicate that a good combination of hardness and strength can be achieved after solutionizing at 1075$^\circ$C followed by double tempering at 525$^\circ$C.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
The fading of Cassiopeia A, and improved models for the absolute spectrum of primary radio calibration sources
Authors:
A. S. Trotter,
D. E. Reichart,
R. E. Egger,
J. Stýblová,
M. L. Paggen,
J. R. Martin,
D. A. Dutton,
J. E. Reichart,
N. D. Kumar,
M. P. Maples,
B. N. Barlow,
T. A. Berger,
A. C. Foster,
N. R. Frank,
F. D. Ghigo,
J. B. Haislip,
S. A. Heatherly,
V. V. Kouprianov,
A. P. LaCluyzé,
D. A. Moffett,
J. P. Moore,
J. L. Stanley,
S. White
Abstract:
Based on five years of observations with the 40-foot telescope at Green Bank Observatory (GBO), Reichart & Stephens (2000) found that the radio source Cassiopeia A had either faded more slowly between the mid-1970s and late 1990s than Baars et al. (1977) had found it to be fading between the late 1940s and mid-1970s, or that it had rebrightened and then resumed fading sometime between the mid-1970…
▽ More
Based on five years of observations with the 40-foot telescope at Green Bank Observatory (GBO), Reichart & Stephens (2000) found that the radio source Cassiopeia A had either faded more slowly between the mid-1970s and late 1990s than Baars et al. (1977) had found it to be fading between the late 1940s and mid-1970s, or that it had rebrightened and then resumed fading sometime between the mid-1970s and mid-1990s, in L band (1.4 GHz). Here, we present 15 additional years of observations of Cas A and Cyg A with the 40-foot in L band, and three and a half additional years of observations of Cas A, Cyg A, Tau A, and Vir A with GBO's recently refurbished 20-meter telescope in L and X (9 GHz) bands. We also present a more sophisticated analysis of the 40-foot data, and a reanalysis of the Baars et al. (1977) data, which reveals small, but non-negligible differences. We find that overall, between the late 1950s and late 2010s, Cas A faded at an average rate of $0.670 \pm 0.019$ %/yr in L band, consistent with Reichart & Stephens (2000). However, we also find, at the 6.3$σ$ credible level, that it did not fade at a constant rate. Rather, Cas A faded at a faster rate through at least the late 1960s, rebrightened (or at least faded at a much slower rate), and then resumed fading at a similarly fast rate by, at most, the late 1990s. Given these differences from the original Baars et al. (1977) analysis, and given the importance of their fitted spectral and temporal models for flux-density calibration in radio astronomy, we update and improve on these models for all four of these radio sources. In doing so, we additionally find that Tau A is fading at a rate of $0.102^{+0.042}_{-0.043}$ %/yr in L band.
△ Less
Submitted 30 March, 2017;
originally announced April 2017.
Machine learning techniques for astrophysical modelling and photometric redshift estimation of quasars in optical sky surveys
Authors:
N. Daniel Kumar
Abstract:
Machine learning techniques are utilised in several areas of astrophysical research today. This dissertation addresses the application of ML techniques to two classes of problems in astrophysics, namely, the analysis of individual astronomical phenomena over time and the automated, simultaneous analysis of thousands of objects in large optical sky surveys. Specifically investigated are (1) techn…
▽ More
Machine learning techniques are utilised in several areas of astrophysical research today. This dissertation addresses the application of ML techniques to two classes of problems in astrophysics, namely, the analysis of individual astronomical phenomena over time and the automated, simultaneous analysis of thousands of objects in large optical sky surveys. Specifically investigated are (1) techniques to approximate the precise orbits of the satellites of Jupiter and Saturn given Earth-based observations as well as (2) techniques to quickly estimate the distances of quasars observed in the Sloan Digital Sky Survey. Learning methods considered include genetic algorithms, particle swarm optimisation, artificial neural networks, and radial basis function networks.
The first part of this dissertation demonstrates that GAs and PSO can both be efficiently used to model functions that are highly non-linear in several dimensions. It is subsequently demonstrated in the second part that ANNs and RBFNs can be used as effective predictors of spectroscopic redshift given accurate photometry, especially in combination with other learning-based approaches described in the literature. Careful application of these and other ML techniques to problems in astronomy and astrophysics will contribute to a better understanding of stellar evolution, binary star systems, cosmology, and the large-scale structure of the universe.
△ Less
Submitted 6 January, 2009; v1 submitted 4 November, 2008;
originally announced November 2008.
