-
Multistep severe plastic deformation to achieve non-rare earth bulk magnets with high α-MnBi phase content
Authors:
L. Weissitsch,
S. Wurster,
H. Krenn,
A. Bachmaier
Abstract:
The ferromagnetic α-MnBi phase as non-rare earth magnetic material has gained increasing interest, but fabrication of large volumes containing a significant amount of α-MnBi is still challenging. Targeting successful processing strategies, we apply multistep severe plastic deformation with intermediate magnetic field assisted annealing. The subsequent severe plastic deformation renewed the high am…
▽ More
The ferromagnetic α-MnBi phase as non-rare earth magnetic material has gained increasing interest, but fabrication of large volumes containing a significant amount of α-MnBi is still challenging. Targeting successful processing strategies, we apply multistep severe plastic deformation with intermediate magnetic field assisted annealing. The subsequent severe plastic deformation renewed the high amount of material defects and lead to microstructural refinement of the previously formed α-MnBi phase. Thus, α-MnBi phase content is enhanced during final annealing. Secondly, the magnetic coercivity increases. These results suggest that further optimization will pave the way towards non-rare-earth bulk magnetic materials with enhanced α-MnBi phase content.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Synthesis of hard magnetic α-MnBi phase by high pressure torsion and field assisted annealing
Authors:
Lukas Weissitsch,
Stefan Wurster,
Martin Stueckler,
Timo Mueller,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Bulk composites using powder blends of Mn and Bi with equal atomic ratios are consolidated and severely deformed by high-pressure torsion (HPT). Subsequent annealing treatments lead to the formation of the ferromagnetic and rare-earth free hard magnetic α-MnBi phase. The initial phase formation is studied by in-situ high-energy XRD annealing experiments showing a beneficial influence of HPT-deform…
▽ More
Bulk composites using powder blends of Mn and Bi with equal atomic ratios are consolidated and severely deformed by high-pressure torsion (HPT). Subsequent annealing treatments lead to the formation of the ferromagnetic and rare-earth free hard magnetic α-MnBi phase. The initial phase formation is studied by in-situ high-energy XRD annealing experiments showing a beneficial influence of HPT-deformation on the amount of α-MnBi. The nucleation sites are strongly increased, thus the volumetric α-MnBi phase content exceeds 50 vol.%. A lower HPT-pressure of 2 GPa is found to be preferred over 5 GPa to obtain high α-MnBi contents. Annealing is done with or without applying an external magnetic field. Additionally, influences of the HPT-induced shear deformation are discussed and correlated with preferred diffusion path ways fostering the formation of anisotropic α-MnBi phase.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Exchange Bias Demonstrated in Bulk Nanocomposites Processed by High Pressure Torsion
Authors:
Michael Zawodzki,
Lukas Weissitsch,
Heinz Krenn,
Stefan Wurster,
Andrea Bachmaier
Abstract:
Ferromagnetic (Fe or Fe20Ni80) and antiferromagnetic (NiO) phases were deformed by high pressure torsion, a severe plastic deformation technique, to manufacture bulk sized nanocomposites and demonstrate an exchange bias, which has been reported predominantly for bilayer thin films. High pressure torsion deformation at elevated temperatures proved to be the key to obtain homogeneous bulk nanocompos…
▽ More
Ferromagnetic (Fe or Fe20Ni80) and antiferromagnetic (NiO) phases were deformed by high pressure torsion, a severe plastic deformation technique, to manufacture bulk sized nanocomposites and demonstrate an exchange bias, which has been reported predominantly for bilayer thin films. High pressure torsion deformation at elevated temperatures proved to be the key to obtain homogeneous bulk nanocomposites. X-ray diffraction investigations detected nanocrystallinity of the ferromagnetic and antiferromagnetic phases. Furthermore, an additional phase was identified by X-ray diffraction, which formed during deformation at elevated temperatures through the reduction of NiO by Fe. Depending on the initial powder composition of Fe50NiO50 or Fe10Ni40NiO50 the new phase was magnetite or maghemite, respectively. Magnetometry measurements demonstrated an exchange bias in the high pressure torsion processed bulk nanocomposites. Additionally, a tailoring of magnetic parameters was demonstrated by the application of different strains or post-process annealing. A correlation between the amount of applied strain and exchange bias was found. The increase of exchange bias through applied strain was related to the microstructural refinement of the nanocomposite. The nanocrystalline maghemite was considered to have a crucial impact on the observed changes of exchange bias through applied strain.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Manufacturing of Textured Bulk Fe-SmCo$_{5}$ Magnets by Severe Plastic Deformation
Authors:
Lukas Weissitsch,
Martin Stückler,
Stefan Wurster,
Juraj Todt,
Peter Knoll,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Exchange-coupling between soft- and hard-magnetic phases plays an important role in the engineering of novel magnetic materials. To achieve exchange coupling, a two-phase microstructure is necessary. This interface effect is further enhanced if both phase dimensions are reduced to the nanometer scale. At the same time, it is challenging to obtain large sample dimensions. In this study, powder blen…
▽ More
Exchange-coupling between soft- and hard-magnetic phases plays an important role in the engineering of novel magnetic materials. To achieve exchange coupling, a two-phase microstructure is necessary. This interface effect is further enhanced if both phase dimensions are reduced to the nanometer scale. At the same time, it is challenging to obtain large sample dimensions. In this study, powder blends and ball-milled powder blends of Fe-SmCo$_{5}$ are consolidated and are deformed by high-pressure torsion (HPT), as this technique allows us to produce bulk magnetic materials of reasonable sizes. Additionally, the effect of severe deformation by ball-milling and severe plastic deformation by HPT on exchange coupling in Fe-SmCo$_{5}$ composites is investigated. Due to the applied shear deformation, it is possible to obtain a texture in both phases, resulting in an anisotropic magnetic behavior and an improved magnetic performance.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Soft Magnetic Properties of Ultra-Strong and Nanocrystalline Pearlitic Wires
Authors:
Stefan Wurster,
Martin Stückler,
Lukas Weissitsch,
Heinz Krenn,
Anton Hohenwarter,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
The paper describes the capability of magnetic softening of a coarse grained bulk material by a severe deformation technique. Connecting the microstructure with magnetic properties, the coercive field decreases dramatically for grains smaller than the magnetic exchange length. This makes the investigation of soft magnetic properties of severely drawn pearlitic wires very interesting. With the help…
▽ More
The paper describes the capability of magnetic softening of a coarse grained bulk material by a severe deformation technique. Connecting the microstructure with magnetic properties, the coercive field decreases dramatically for grains smaller than the magnetic exchange length. This makes the investigation of soft magnetic properties of severely drawn pearlitic wires very interesting. With the help of the starting two phase microstructure, it is possible to substantially refine the material, which allows the investigation of magnetic properties for nanocrystalline bulk material. Compared to the coarse grained initial, pearlitic state, the coercivities of the highly deformed wires decrease while the saturation magnetization values increase, even beyond the value expectable from the individual constituents. The lowest coercivity in the drawn state is found to be 520 A m for a wire of 24 um thickness and an annealing treatment has a further positive effect on it. The decreasing coercivity is discussed in the framework of two opposing models: grain refinement on the one hand and dissolution of cementite on the other hand. Auxiliary measurements give a clear indication for the latter model, delivering a sufficient description of the observed evolution of magnetic properties.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Sampling the Cu-Fe-Co phase diagram by severe plastic deformation for enhanced soft magnetic properties
Authors:
Martin Stückler,
Stefan Wurster,
Lukas Weissitsch,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic materials and therefore at the formation of a homogeneous and nanocrystalline microstructure. For intermediate ferromagnetic contents, high-pressure torsion at…
▽ More
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic materials and therefore at the formation of a homogeneous and nanocrystalline microstructure. For intermediate ferromagnetic contents, high-pressure torsion at room temperature yields single-phase supersaturated solid solutions. For higher ferromagnetic contents, two consecutive steps of high-pressure torsion deformation at different temperatures yield the desired nanocrystalline microstructure. Depending on the Co-to-Fe-ratio, either a single-phase supersaturated solid solution or a nanocomposite forms. The composite exhibits an enhanced magnetic moment, indicating the formation of a (Fe,Co)-alloy upon severe plastic deformation. Soft magnetic properties are verified for large Co-to-Fe-ratios and this microstructure is found to remain stable up to 400 °C.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
On the magnetic nanostructure of a Co-Cu alloy processed by high-pressure torsion
Authors:
Martin Stückler,
Christian Teichert,
Aleksandar Matković,
Heinz Krenn,
Lukas Weissitsch,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable micr…
▽ More
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable microstructural stability. Only at 600°C, the supersaturated phase decomposes into two fcc-phases. The coercivity, measured by SQUID as a function of annealing temperature, remains significantly below the value for bulk-Co in all states investigated. In order to understand the measured magnetic properties in detail, a quantitative analysis of the magnetic microstructure is carried out by magnetic force microscopy and correlated to the observed changes in coercivity. Our results show that the rising coercivity can be explained by a magnetic hardening effect occurring in context with spinodal decomposition.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo$_{5}$ Permanent Magnets Generated by High Pressure Torsion
Authors:
Lukas Weissitsch,
Martin Stückler,
Stefan Wurster,
Peter Knoll,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
High-pressure torsion (HPT), a technique of severe plastic deformation (SPD), is shown as a promising processing method for exchange-spring magnetic materials in bulk form. Powder mixtures of Fe and SmCo$_{5}$ are consolidated and deformed by HPT exhibiting sample dimensions of several millimetres, being essential for bulky magnetic applications. The structural evolution during HPT deformation of…
▽ More
High-pressure torsion (HPT), a technique of severe plastic deformation (SPD), is shown as a promising processing method for exchange-spring magnetic materials in bulk form. Powder mixtures of Fe and SmCo$_{5}$ are consolidated and deformed by HPT exhibiting sample dimensions of several millimetres, being essential for bulky magnetic applications. The structural evolution during HPT deformation of Fe-SmCo$_{5}$ compounds at room- and elevated- temperatures of chemical compositions consisting of 87, 47, 24 and 10 wt.% Fe is studied and microstructurally analysed. Electron microscopy and synchrotron X-ray diffraction reveal a dual-phase nanostructured composite for the as-deformed samples with grain refinement after HPT deformation. SQUID magnetometry measurements show hysteresis curves of an exchange coupled nanocomposite at room temperature, while for low temperatures a decoupling of Fe and SmCo$_{5}$ is observed. Furthermore, exchange interactions between the hard- and soft-magnetic phase can explain a shift of the hysteresis curve. Strong emphasis is devoted to the correlation between the magnetic properties and the evolving nano-structure during HPT deformation, which is conducted for a 1:1 composition ratio of Fe to SmCo$_{5}$. SQUID magnetometry measurements show an increasing saturation magnetisation for increasing strain $γ$ and a maximum of the coercive field strength at a shear strain of $γ$ = 75.
△ Less
Submitted 19 January, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
Intermixing of Fe and Cu on the atomic scale by high-pressure torsion as revealed by DC- and AC-SQUID susceptometry and atom probe tomography
Authors:
Martin Stückler,
Heinz Krenn,
Philipp Kürnsteiner,
Baptiste Gault,
Frédéric De Geuser,
Lukas Weissitsch,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
The capability of high-pressure torsion on the preparation of supersaturated solid solutions, consisting of Cu-14Fe (wt.%), is studied. From microstructural investigations a steady state is obtained with nanocrystalline grains. The as-deformed state is analyzed with atom probe tomography, revealing an enhanced solubility and the presence of Fe-rich particles. The DC-hysteresis loop shows suppresse…
▽ More
The capability of high-pressure torsion on the preparation of supersaturated solid solutions, consisting of Cu-14Fe (wt.%), is studied. From microstructural investigations a steady state is obtained with nanocrystalline grains. The as-deformed state is analyzed with atom probe tomography, revealing an enhanced solubility and the presence of Fe-rich particles. The DC-hysteresis loop shows suppressed long range interactions in the as-deformed state and evolves towards a typical bulk hysteresis loop when annealed at 500°C. AC-susceptometry measurements of the as-deformed state reveal the presence of a superparamagnetic blocking peak, as well as a magnetic frustrated phase, whereas the transition of the latter follows the Almeida-Thouless line, coinciding with the microstructural investigations by atom probe tomography. AC-susceptometry shows that the frustrated state vanishes for annealing at 250°C.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Tuneable Magneto-Resistance by Severe Plastic Deformation
Authors:
Stefan Wurster,
Lukas Weissitsch,
Martin Stueckler,
Peter Knoll,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Bulk metallic samples were synthesized from different binary powder mixtures consisting of elemental Cu, Co, and Fe using severe plastic deformation. Small particles of the ferromagnetic phase originate in the conductive Cu phase, either by incomplete dissolution or by segregation phenomena during the deformation process. These small particles are known to give rise to granular giant magnetoresist…
▽ More
Bulk metallic samples were synthesized from different binary powder mixtures consisting of elemental Cu, Co, and Fe using severe plastic deformation. Small particles of the ferromagnetic phase originate in the conductive Cu phase, either by incomplete dissolution or by segregation phenomena during the deformation process. These small particles are known to give rise to granular giant magnetoresistance. Taking advantage of the simple production process, it is possible to perform a systematic study on the influence of processing parameters and material compositions on the magneto-resistance. Furthermore, it is feasible to tune the magnetoresistive behavior as a function of the specimens chemical composition. It was found that specimens of low ferromagnetic content show an almost isotropic drop in resistance in a magnetic field. With increasing ferromagnetic content, percolating ferromagnetic phases cause an anisotropy of the magnetoresistance. By changing the parameters of the high pressure torsion process, i.e., sample size, deformation temperature, and strain rate, it is possible to tailor the magnitude of giant magneto-resistance. A decrease in room temperature resistivity of approx. 3.5% was found for a bulk specimen containing an approximately equiatomic fraction of Co and Cu.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
Authors:
Martin Stückler,
Heinz Krenn,
Reinhard Pippan,
Lukas Weissitsch,
Stefan Wurster,
Andrea Bachmaier
Abstract:
Samples consisting of one ferromagnetic and one diamagnetic component which are immiscible at the thermodynamic equilibrium (Co-Cu, Fe-Cu, Fe-Ag) are processed by high-pressure torsion at various compositions. The received microstructures are investigated by electron microscopy and synchrotron X-ray diffraction, showing a microstructural saturation. Results gained from microstructural investigatio…
▽ More
Samples consisting of one ferromagnetic and one diamagnetic component which are immiscible at the thermodynamic equilibrium (Co-Cu, Fe-Cu, Fe-Ag) are processed by high-pressure torsion at various compositions. The received microstructures are investigated by electron microscopy and synchrotron X-ray diffraction, showing a microstructural saturation. Results gained from microstructural investigations are correlated to magnetometry data. The Co-Cu samples show mainly ferromagnetic behavior and a decrease in coercivity with increasing Co-content. The saturation microstructure of Fe-Cu samples is found to be dual phase. Results of magnetic measurements also revealed the occurrence of two different magnetic phases in this system. For Fe-Ag, the microstructural and magnetic results indicate that no intermixing between the elemental phases takes place.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Magnetic dilution by severe plastic deformation
Authors:
Martin Stückler,
Lukas Weissitsch,
Stefan Wurster,
Peter Felfer,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry, whereas the magnetic properties change as a function of Fe-content from a frustrated regime to a thermal activated behaviour. The magnetic properties are correlated…
▽ More
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry, whereas the magnetic properties change as a function of Fe-content from a frustrated regime to a thermal activated behaviour. The magnetic properties are correlated with the microstructure, investigated by synchrotron X-ray diffraction and atom probe tomography. Annealing of the as-deformed states leads to demixing and grain growth, with the coercivity as a function of annealing temperature obeying the random anisotropy model. The presented results show that high-pressure torsion is a technique capable to affect the microstructure even on atomic length scales.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing
Authors:
A. Bachmaier,
H. Krenn,
P. Knoll,
H. Aboulfadl,
R. Pippan
Abstract:
In this study, severe plastic deformation by high pressure torsion is used as a fabrication method for nanocrystalline magnetic CuCo alloys in bulk quantities. By subsequent isothermal annealing, phase separation of the supersaturated solid solutions can be obtained. The magnetic properties of the as-processed and annealed materials have been studied systemically and correlated to the evolving nan…
▽ More
In this study, severe plastic deformation by high pressure torsion is used as a fabrication method for nanocrystalline magnetic CuCo alloys in bulk quantities. By subsequent isothermal annealing, phase separation of the supersaturated solid solutions can be obtained. The magnetic properties of the as-processed and annealed materials have been studied systemically and correlated to the evolving nanostructures investigated in detail by transmission electron microscopy and atom probe tomography. By additional high pressure torsion deformation at liquid nitrogen temperature the magnetic properties of the Cu74Co26 alloy can be further tuned.
△ Less
Submitted 13 December, 2018;
originally announced December 2018.
-
Exchange interactions in europium monochalcogenide magnetic semiconductors and their dependence on hydrostatic strain
Authors:
W. Söllinger,
W. Heiss,
R. T. Lechner,
K. Rumpf,
P. Granitzer,
H. Krenn,
G. Springholz
Abstract:
The classical Heisenberg model is applied in a Monte Carlo study to investigate the distance dependence of the indirect nearest neighbor (NN) exchange and next-nearest neighbor (NNN) superexchange interaction in EuO, EuS, EuSe and EuTe. For this purpose, first, the dependence of the magnetic ordering temperature, i.e., Curie, respectively, Néel temperature for ferromagnetic and antiferromagnetic…
▽ More
The classical Heisenberg model is applied in a Monte Carlo study to investigate the distance dependence of the indirect nearest neighbor (NN) exchange and next-nearest neighbor (NNN) superexchange interaction in EuO, EuS, EuSe and EuTe. For this purpose, first, the dependence of the magnetic ordering temperature, i.e., Curie, respectively, Néel temperature for ferromagnetic and antiferromagnetic ordering on the exchange constants was determined. This was then employed for the analysis of experimental data of hydrostatic pressure experiments. It is shown that all experimental findings, i.e., the strong increase of the critical temperatures, as well as the transition from antiferromagnetic to ferromagnetic ordering for EuTe and EuSe with decreasing lattice parameter is well described by the magnetic Grüneisen law, in which the exchange constants depend on the interatomic distances of the Eu ions in the form of a power law. According to these calculations, the indirect NN exchange is characterized by a Grüneisen exponent of approximately 20 and the NNN superexchange by an exponent of about 10 for all four europium monochalcogenides. The latter agrees with Bloch's empirical 10/3 law for the volume dependence of superexchange interactions in insulating magnetic materials. The Monte Carlo calculations also yield significantly revised exchange constants for unstrained bulk material because spin fluctuations at non-zero temperatures are taken into account. The strong increase of the exchange constants with decreasing lattice parameter provides room for increasing the Curie temperatures in strained epitaxial structures, which is important for device applications.
△ Less
Submitted 22 July, 2009;
originally announced July 2009.
-
Magnetic interactions in EuTe epitaxial layers and EuTe/PbTe superlattices
Authors:
H. Kepa,
G. Springholz,
T. M. Giebultowicz,
K. I. Goldman,
C. F. Majkrzak,
P. Kacman,
J. Blinowski,
S. Holl,
H. Krenn,
G. Bauer
Abstract:
The magnetic properties of antiferromagnetic (AFM) EuTe epitaxial layers and short period EuTe/PbTe superlattices (SLs), grown by molecular beam epitaxy on (111) BaF$_2$ substrates, were studied by magnetization and neutron diffraction measurements. Considerable changes of the Néel temperature as a function of the EuTe layer thickness as well as of the strain state were found. A mean field model…
▽ More
The magnetic properties of antiferromagnetic (AFM) EuTe epitaxial layers and short period EuTe/PbTe superlattices (SLs), grown by molecular beam epitaxy on (111) BaF$_2$ substrates, were studied by magnetization and neutron diffraction measurements. Considerable changes of the Néel temperature as a function of the EuTe layer thickness as well as of the strain state were found. A mean field model, taking into account the variation of the exchange constants with the strain-induced lattice distortions, and the nearest neighbor environment of a Eu atoms, was developed to explain the observed $T_{\text N}$ changes in wide range of samples. Pronounced interlayer magnetic correlations have been revealed by neutron diffraction in EuTe/PbTe SLs with PbTe spacer thickness up to 60 Å. The observed diffraction spectra were analyzed, in a kinematical approximation, assuming partial interlayer correlations characterized by an appropriate correlation parameter. The formation of interlayer correlations between the AFM EuTe layers across the nonmagnetic PbTe spacer was explained within a framework of a tight-binding model. In this model, the interlayer coupling stems from the dependence of the total electronic energy of the EuTe/PbTe SL on the spin configurations in adjacent EuTe layers. The influence of the EuTe and PbTe layer thickness fluctuations, inherent in the epitaxial growth process, on magnetic properties and interlayer coupling is discussed.
△ Less
Submitted 30 May, 2003; v1 submitted 18 February, 2003;
originally announced February 2003.
