Showing 1–50 of 144 results for author: Krämer, J

Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

Authors: Richard H. J. Kim, Samuel J. Haeuser, Joong-Mok Park, Randall K. Chan, Jin-Su Oh, Thomas Koschny, Lin Zhou, Matthew J. Kramer, Akshay A. Murthy, Mustafa Bal, Francesco Crisa, Sabrina Garattoni, Shaojiang Zhu, Andrei Lunin, David Olaya, Peter Hopkins, Alex Romanenko, Anna Grassellino, Jigang Wang

Abstract: Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewal… ▽ More Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Frequency and Bandwidth Design of FR3-Band Acoustic Filters

Authors: Taran Anusorn, Omar Barrera, Jack Kramer, Ian Anderson, Ziqian Yao, Vakhtang Chulukhadze, Ruochen Lu

Abstract: This article presents an approach to control the operating frequency and fractional bandwidth (FBW) of miniature acoustic filters in thin-film lithium niobate (TFLN). More specifically, we used the first-order antisymmetric (A1) mode in lateral-field-excited bulk acoustic wave resonators (XBARs) to achieve efficient operation at 20.5 GHz. Our technique leverages the thickness-dependent resonance f… ▽ More This article presents an approach to control the operating frequency and fractional bandwidth (FBW) of miniature acoustic filters in thin-film lithium niobate (TFLN). More specifically, we used the first-order antisymmetric (A1) mode in lateral-field-excited bulk acoustic wave resonators (XBARs) to achieve efficient operation at 20.5 GHz. Our technique leverages the thickness-dependent resonance frequency of A1 XBARs, combined with the in-plane anisotropic properties of 128$^\circ$ Y-cut TFLN, to customize filter characteristics. The implemented three-element ladder filter prototype achieves an insertion loss (IL) of only 1.79 dB and a controlled 3-dB FBW of 8.58% at 20.5 GHz, with an out-of-band (OoB) rejection greater than 14.9 dB across the entire FR3 band, while featuring a compact footprint of 0.90 $\times$ 0.74 mm$^2$. Moreover, an eight-element filter prototype shows an IL of 3.80 dB, an FBW of 6.12% at 22.0 GHz, and a high OoB rejection of 22.97 dB, demonstrating the potential for expanding to higher-order filters. As frequency allocation requirements become more stringent in future FR3 bands, our technique showcases promising capability in enabling compact and monolithic filter banks toward next-generation acoustic filters for 6G and beyond. △ Less

Submitted 23 May, 2025; originally announced May 2025.

Comments: 12 pages, 20 figures, 8 tables

Origin of the ring ellipticity in the black hole images of M87*

Authors: Rohan Dahale, Ilje Cho, Kotaro Moriyama, Kaj Wiik, Paul Tiede, José L. Gómez, Chi-kwan Chan, Roman Gold, Vadim Y. Bernshteyn, Marianna Foschi, Britton Jeter, Hung-Yi Pu, Boris Georgiev, Abhishek V. Joshi, Alejandro Cruz-Osorio, Iniyan Natarajan, Avery E. Broderick, León D. S. Salas, Koushik Chatterjee, Kazunori Akiyama, Ezequiel Albentosa-Ruíz, Antxon Alberdi, Walter Alef, Juan Carlos Algaba, Richard Anantua , et al. (251 additional authors not shown)

Abstract: We investigate the origin of the elliptical ring structure observed in the images of the supermassive black hole M87*, aiming to disentangle contributions from gravitational, astrophysical, and imaging effects. Leveraging the enhanced capabilities of the Event Horizon Telescope (EHT) 2018 array, including improved $(u,v)$-coverage from the Greenland Telescope, we measure the ring's ellipticity usi… ▽ More We investigate the origin of the elliptical ring structure observed in the images of the supermassive black hole M87*, aiming to disentangle contributions from gravitational, astrophysical, and imaging effects. Leveraging the enhanced capabilities of the Event Horizon Telescope (EHT) 2018 array, including improved $(u,v)$-coverage from the Greenland Telescope, we measure the ring's ellipticity using five independent imaging methods, obtaining a consistent average value of $τ= 0.08_{-0.02}^{+0.03}$ with a position angle $ξ= 50.1_{-7.6}^{+6.2}$ degrees. To interpret this measurement, we compare against General Relativistic Magnetohydrodynamic (GRMHD) simulations spanning a wide range of physical parameters including thermal or non-thermal electron distribution function, spins, and ion-to-electron temperature ratios in both low and high-density regions. We find no statistically significant correlation between spin and ellipticity in GRMHD images. Instead, we identify a correlation between ellipticity and the fraction of non-ring emission, particularly in non-thermal models and models with higher jet emission. These results indicate that the ellipticity measured from the \m87 emission structure is consistent with that expected from simulations of turbulent accretion flows around black holes, where it is dominated by astrophysical effects rather than gravitational ones. Future high-resolution imaging, including space very long baseline interferometry and long-term monitoring, will be essential to isolate gravitational signatures from astrophysical effects. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Comments: 18 pages, 13 figures

High-Q Millimeter-Wave Acoustic Resonators in Thin-Film Lithium Niobate Using Higher-Order Antisymmetric Modes

Authors: Vakhtang Chulukhadze, Jack Kramer, Tzu-Hsuan Hsu, Omar Barrera, Ruochen Lu

Abstract: This letter presents miniature millimeter wave (mmWave, above 30 GHz) acoustic resonators based on a single-layer thin-film lithium niobate (LN) platform. More specifically, we present high performance third-order antisymmetric (A3) mode laterally excited bulk acoustic resonators (XBAR). Compared to prior demonstrations, the proposed platform features a compact footprint due to a smaller lateral w… ▽ More This letter presents miniature millimeter wave (mmWave, above 30 GHz) acoustic resonators based on a single-layer thin-film lithium niobate (LN) platform. More specifically, we present high performance third-order antisymmetric (A3) mode laterally excited bulk acoustic resonators (XBAR). Compared to prior demonstrations, the proposed platform features a compact footprint due to a smaller lateral wavelength and aperture. We showcase an A3 mode device operating at 39.8 GHz with a high extracted electromechanical coupling (k2) of 4%, a high 3-dB series resonance quality factor (Q_s) of 97, and a high 3-dB anti-resonance quality factor (Q_p) of 342, leading to a figure of merit (FoM=k^2*Q_p) of 13.7 with a footprint of 32x44 micron^2. To demonstrate frequency scalability, the piezoelectric film thickness is varied while keeping the device layout. As a result, we present a multitude of high-performance devices covering a wide frequency range of 30-50 GHz, validating the proposed XBAR design at mmWave. △ Less

Submitted 22 May, 2025; v1 submitted 28 April, 2025; originally announced May 2025.

Thin-film scandium aluminum nitride bulk acoustic resonator with high Q of 208 and K2 of 9.5% at 12.5 GHz

Authors: Sinwoo Cho, Yinan Wang, Eugene Kwon, Lezli Matto, Omar Barrera, Michael Liao, Jack Kramer, Tzu-Hsuan Hsu, Vakhtang Chulukhadze, Ian Anderson, Mark Goorksy, Ruochen Lu

Abstract: This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at 12.5 GHz with high electromechanical coupling (k2) of 9.5% and quality factor (Q) of 208, resulting in a figure of merit (FoM, Qk2) of 19.8. ScAlN resonators employ a stack of 90 nm thick 20% Sc doping ScAlN piezoelectric film on the floating bottom 38 nm thick platinum (Pt) electrode to ac… ▽ More This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at 12.5 GHz with high electromechanical coupling (k2) of 9.5% and quality factor (Q) of 208, resulting in a figure of merit (FoM, Qk2) of 19.8. ScAlN resonators employ a stack of 90 nm thick 20% Sc doping ScAlN piezoelectric film on the floating bottom 38 nm thick platinum (Pt) electrode to achieve low losses and high coupling toward centimeter wave (cmWave) frequency band operation. Three fabricated and FBARs are reported, show promising prospects of ScAlN-Pt stack towards cmWave front-end filters. △ Less

Submitted 30 April, 2025; v1 submitted 28 April, 2025; originally announced April 2025.

Comments: 4 pages, 8 figures submitted to The 23rd International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2025)

Ku-Band AlScn-On-Diamond SAW Resonators with Phase Velocity above 8600 m/s

Authors: Tzu-Hsuan Hsu, Kapil Saha, Jack Kramer, Omar Barrera, Pietro Simoni, Matteo Rinaldi, Ruochen Lu

Abstract: In this work, an Aluminum Scandium Nitride (AlScN) on Diamond Sezawa-mode surface acoustic wave (SAW) platform for RF filtering at Ku-band (12-18 GHz) is demonstrated. Thanks to the high acoustic velocity and low-loss diamond substrate, the prototype resonator at 12.9 GHz achieves a high phase velocity ($v_p$) of 8671 m/s, a maximum Bode-$Q$ of 408, and coupling coefficient ($k_{\mathrm{eff}}^2$)… ▽ More In this work, an Aluminum Scandium Nitride (AlScN) on Diamond Sezawa-mode surface acoustic wave (SAW) platform for RF filtering at Ku-band (12-18 GHz) is demonstrated. Thanks to the high acoustic velocity and low-loss diamond substrate, the prototype resonator at 12.9 GHz achieves a high phase velocity ($v_p$) of 8671 m/s, a maximum Bode-$Q$ of 408, and coupling coefficient ($k_{\mathrm{eff}}^2$) of 2.1%, outperforming high-velocity substrates such as SiC and sapphire by more than 20% in velocity. Resonators spanning 8-18 GHz are presented. The platform's high power handling above 12.5 dBm is also experimentally validated. △ Less

Submitted 28 April, 2025; originally announced April 2025.

Comments: 4 pages, 7 figures, 1 table, submitted to The 23rd International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2025)

Charge radii of neutron-rich scandium isotopes and the seniority symmetry in the $0f_{7/2}$ shell

Authors: S. W. Bai, X. F. Yang, Á. Koszorús, J. C. Berengut, J. Billowes, M. L. Bissell, K. Blaum, A. Borschevsky, P. Campbell, B. Cheal, C. S. Devlin, K. T. Flanagan, R. F. Garcia Ruiz, H. Heylen, J. D. Holt, B. S. Hu, A. Kanellakopoulos, J. Krämer, V. Lagaki, B. Maaß, S. Malbrunot-Ettenauer, T. Miyagi, K. König, M. Kortelainen, W. Nazarewicz , et al. (8 additional authors not shown)

Abstract: Nuclear charge radii of neutron-rich $^{47-49}$Sc isotopes were measured using collinear laser spectroscopy at CERN-ISOLDE. The new data reveal that the charge radii of scandium isotopes exhibit a distinct trend between $N=20$ and $N=28$, with $^{41}$Sc and $^{49}$Sc isotopes having similar values, mirroring the closeness of the charge radii of $^{40}$Ca and $^{48}$Ca. Theoretical models that succ… ▽ More Nuclear charge radii of neutron-rich $^{47-49}$Sc isotopes were measured using collinear laser spectroscopy at CERN-ISOLDE. The new data reveal that the charge radii of scandium isotopes exhibit a distinct trend between $N=20$ and $N=28$, with $^{41}$Sc and $^{49}$Sc isotopes having similar values, mirroring the closeness of the charge radii of $^{40}$Ca and $^{48}$Ca. Theoretical models that successfully interpret the radii of calcium isotopes could not account for the observed behavior in scandium radii, in particular the reduced odd-even staggering. Remarkably, the inclusion of the new $^{49}$Sc radius data has unveiled a similar trend in the charge radii of $N=28$ isotones and $Z=20$ isotopes when adding the neutrons atop the $^{40}$Ca core and the protons atop the $^{48}$Ca core, respectively. We demonstrate that this trend is consistent with the prediction of the seniority model. △ Less

Submitted 16 April, 2025; originally announced April 2025.

Comments: Version accepted for publication in Phys. Rev. Lett

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

Authors: Akshay A. Murthy, Mustafa Bal, Michael J. Bedzyk, Hilal Cansizoglu, Randall K. Chan, Venkat Chandrasekhar, Francesco Crisa, Amlan Datta, Yanpei Deng, Celeo D. Matute Diaz, Vinayak P. Dravid, David A. Garcia-Wetten, Sabrina Garattoni, Sunil Ghimire, Dominic P. Goronzy, Sebastian de Graaf, Sam Haeuser, Mark C. Hersam, Peter Hopkins, Dieter Isheim, Kamal Joshi, Richard Kim, Saagar Kolachina, Cameron J. Kopas, Matthew J. Kramer , et al. (24 additional authors not shown)

Abstract: The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying… ▽ More The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values. △ Less

Submitted 2 June, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

Word-level Annotation of GDPR Transparency Compliance in Privacy Policies using Large Language Models

Authors: Thomas Cory, Wolf Rieder, Julia Krämer, Philip Raschke, Patrick Herbke, Axel Küpper

Abstract: Ensuring transparency of data practices related to personal information is a fundamental requirement under the General Data Protection Regulation (GDPR), particularly as mandated by Articles 13 and 14. However, assessing compliance at scale remains a challenge due to the complexity and variability of privacy policy language. Manual audits are resource-intensive and inconsistent, while existing aut… ▽ More Ensuring transparency of data practices related to personal information is a fundamental requirement under the General Data Protection Regulation (GDPR), particularly as mandated by Articles 13 and 14. However, assessing compliance at scale remains a challenge due to the complexity and variability of privacy policy language. Manual audits are resource-intensive and inconsistent, while existing automated approaches lack the granularity needed to capture nuanced transparency disclosures. In this paper, we introduce a large language model (LLM)-based framework for word-level GDPR transparency compliance annotation. Our approach comprises a two-stage annotation pipeline that combines initial LLM-based annotation with a self-correction mechanism for iterative refinement. This annotation pipeline enables the systematic identification and fine-grained annotation of transparency-related content in privacy policies, aligning with 21 GDPR-derived transparency requirements. To enable large-scale analysis, we compile a dataset of 703,791 English-language policies, from which we generate a sample of 200 manually annotated privacy policies. To evaluate our approach, we introduce a two-tiered methodology assessing both label- and span-level annotation performance. We conduct a comparative analysis of eight high-profile LLMs, providing insights into their effectiveness in identifying GDPR transparency disclosures. Our findings contribute to advancing the automation of GDPR compliance assessments and provide valuable resources for future research in privacy policy analysis. △ Less

Submitted 13 March, 2025; originally announced March 2025.

Probing circular polarization and magnetic field structure in AGN

Authors: Joana A Kramer, Hendrik Müller, Jan Röder, Eduardo Ros

Abstract: The magnetic field morphology of relativistic jets can be studied with circular polarization (CP). Recent 3D relativistic magnetohydrodynamic (RMHD) simulations coupled with radiative transfer calculations make strong predictions about the level (and morphology) of the jet's CP emission. These simulations show that the sign of CP and the electric vector position angle (EVPA) are both sensitive to… ▽ More The magnetic field morphology of relativistic jets can be studied with circular polarization (CP). Recent 3D relativistic magnetohydrodynamic (RMHD) simulations coupled with radiative transfer calculations make strong predictions about the level (and morphology) of the jet's CP emission. These simulations show that the sign of CP and the electric vector position angle (EVPA) are both sensitive to the jet's magnetic field morphology within the radio core. We probe this theory by exploring if the jet's radio core EVPA orientation is consistent with the observed sign of the core CP in deep full-track polarimetric observations. We aim to probe the nature of linear polarization and CP in the innermost regions of jets from a small sample of nine blazars. This sample includes sources that have exhibited: (i) positive CP, (ii) negative CP, or (iii) positive & negative CP simultaneously in the radio core region. Nine blazar sources were observed using the VLBA at both 15 GHz and 23 GHz. Our self-calibration relies on a physically based model applied in DoG-HiT resulting in more accurate gains. We consider compact Stokes V structures instead of assuming it to be zero, which is crucial given the significant non-zero CP fraction observed at long baselines. We observe robust, relatively high degrees of fractional circular polarization m_c=(0.32 +- 0.2)% at 15 GHz and m_c=(0.59 +-0.56)% at 23 GHz. We observe consistent polarized structure and EVPA orientation over time when comparing our analysis with archival MOJAVE data. Theoretical predictions indicate a clear favored toroidal magnetic field orientation within the extended jet emission of the reconstructed signal of the blazar 0149+218. The jet structures of 1127-145 and 0528+134, even in superresolution, exhibit characteristics aligned with helical or poloidal magnetic nature. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Journal ref: A&A 697, A66 (2025)

Acoustic resonators above 100 GHz

Authors: Jack Kramer, Bryan T. Bosworth, Lezli Matto, Nicholas R. Jungwirth, Omar Barrera, Florian Bergmann, Sinwoo Cho, Vakhtang Chulukhadze, Mark Goorsky, Nathan D. Orloff, Ruochen Lu

Abstract: Piezoelectric resonators are a common building block for signal processing because of their miniature size, low insertion loss, and high quality factor. As consumer electronics push to millimeter waves frequencies, designers must increase the operating frequency of the resonator. The current state-of-the-art approach to increase the operating frequency is to decrease the thickness of the piezoelec… ▽ More Piezoelectric resonators are a common building block for signal processing because of their miniature size, low insertion loss, and high quality factor. As consumer electronics push to millimeter waves frequencies, designers must increase the operating frequency of the resonator. The current state-of-the-art approach to increase the operating frequency is to decrease the thickness of the piezoelectric film to shorten the acoustic wavelength or to use higher order modes. Unfortunately, maintaining high crystal quality typically requires thicker piezoelectric layers. Thinner layers suffer from higher defect densities and increased surface damping, which degrade the electromechanical coupling and quality factor. While acoustic high order modes can also increase operating frequency, the electromechanical coupling rapidly decreases with increasing mode number. Here, we overcome these limitations by utilizing a piezoelectric stack of three layers of lithium niobate with alternating crystallographic orientations to preferentially support higher order modes and thereby enhance the electromechanical coupling without degrading the quality factor. Our approach improves the figure of merit of millimeter-wave acoustic resonators by roughly an order of magnitude greater compared to state-of-the-art piezoelectric resonators above 60 GHz. This concept of alternating crystallographic orientations facilitates a new path to develop millimeter wave resonators with high figures of merit, low insertion loss, and miniature footprints, enabling new applications in millimeter wave signal processing and computing. △ Less

Submitted 5 February, 2025; originally announced February 2025.

Investigating launching of black hole jets with the combined power of the EVN and the EHT

Authors: G. F. Paraschos, L. C. Debbrecht, J. A. Kramer, E. Traianou, I. Liodakis, T. Krichbaum, J. -Y. Kim, M. Janssen, D. G. Nair, T. Savolainen, E. Ros, U Bach, J. A. Hodgson, M. Lisakov, N. R. MacDonald, J. A. Zensus

Abstract: AGN-launched jets are a crucial element in the study of supermassive black holes (SMBH) and their closest surroundings. The formation of such jets, whether they are launched by magnetic field lines anchored to the accretion disc or directly connected to the black hole's (BH) ergosphere, is the subject of ongoing, extensive research. 3C84, the compact radio source in the central galaxy NGC1275 of t… ▽ More AGN-launched jets are a crucial element in the study of supermassive black holes (SMBH) and their closest surroundings. The formation of such jets, whether they are launched by magnetic field lines anchored to the accretion disc or directly connected to the black hole's (BH) ergosphere, is the subject of ongoing, extensive research. 3C84, the compact radio source in the central galaxy NGC1275 of the Perseus super-cluster, is a prime laboratory for testing such jet launching scenarios, as well as studying the innermost, sub-parsec AGN structure and jet origin. Very long baseline interferometry (VLBI) offers a unique view into the physical processes in action, in the immediate vicinity of BHs, unparalleled by other observational techniques. With VLBI at short wavelengths particular high angular resolutions are obtained. Utilising such cm and mm-VLBI observations of 3C84 with the European VLBI Network and the Event Horizon Telescope, we study the magnetic field strength and associated accretion flow around its central SMBH. This is possible, as higher frequency VLBI measurements are capable of peering through the accretion flow surrounding the central engine of 3C84, which is known to block the line of sight to the sub-parsec counter-jet via free-free absorption. Furthermore, we study the magnetic field's signature in the core region, as manifested in polarised light. As part of this analysis we compare our observations to relativistic magneto-hydrodynamic simulations. Finally, we investigate the effect of instabilities on the shape of the jet's parsec-scale funnel and try to connect them to its historical evolution. △ Less

Submitted 21 January, 2025; originally announced January 2025.

Comments: 4 pages, 4 figures, Proceedings of the 16th European VLBI Network Symposium

The putative center in NGC 1052

Authors: Anne-Kathrin Baczko, Matthias Kadler, Eduardo Ros, Christian M. Fromm, Maciek Wielgus, Manel Perucho, Thomas P. Krichbaum, Mislav Baloković, Lindy Blackburn, Chi-kwan Chan, Sara Issaoun, Michael Janssen, Luca Ricci, Kazunori Akiyama, Ezequiel Albentosa-Ruíz, Antxon Alberdi, Walter Alef, Juan Carlos Algaba, Richard Anantua, Keiichi Asada, Rebecca Azulay, Uwe Bach, David Ball, Bidisha Bandyopadhyay, John Barrett , et al. (262 additional authors not shown)

Abstract: Many active galaxies harbor powerful relativistic jets, however, the detailed mechanisms of their formation and acceleration remain poorly understood. To investigate the area of jet acceleration and collimation with the highest available angular resolution, we study the innermost region of the bipolar jet in the nearby low-ionization nuclear emission-line region (LINER) galaxy NGC 1052. We combine… ▽ More Many active galaxies harbor powerful relativistic jets, however, the detailed mechanisms of their formation and acceleration remain poorly understood. To investigate the area of jet acceleration and collimation with the highest available angular resolution, we study the innermost region of the bipolar jet in the nearby low-ionization nuclear emission-line region (LINER) galaxy NGC 1052. We combined observations of NGC 1052 taken with VLBA, GMVA, and EHT over one week in the spring of 2017. For the first time, NGC 1052 was detected with the EHT, providing a size of the central region in-between both jet bases of 250 RS (Schwarzschild radii) perpendicular to the jet axes. This size estimate supports previous studies of the jets expansion profile which suggest two breaks of the profile at around 300 RS and 10000 RS distances to the core. Furthermore, we estimated the magnetic field to be 1.25 Gauss at a distance of 22 μas from the central engine by fitting a synchrotron-self absorption spectrum to the innermost emission feature, which shows a spectral turn-over at about 130 GHz. Assuming a purely poloidal magnetic field, this implies an upper limit on the magnetic field strength at the event horizon of 26000 Gauss, which is consistent with previous measurements. The complex, low-brightness, double-sided jet structure in NGC 1052 makes it a challenge to detect the source at millimeter (mm) wavelengths. However, our first EHT observations have demonstrated that detection is possible up to at least 230 GHz. This study offers a glimpse through the dense surrounding torus and into the innermost central region, where the jets are formed. This has enabled us to finally resolve this region and provide improved constraints on its expansion and magnetic field strength. △ Less

Submitted 15 January, 2025; originally announced January 2025.

Comments: 22 pages, 10 figures, published in A&A

Journal ref: A&A, 692, A205 (2024)

A multi-frequency study of sub-parsec jets with the Event Horizon Telescope

Authors: Jan Röder, Maciek Wielgus, Andrei P. Lobanov, Thomas P. Krichbaum, Dhanya G. Nair, Sang-Sung Lee, Eduardo Ros, Vincent L. Fish, Lindy Blackburn, Chi-kwan Chan, Sara Issaoun, Michael Janssen, Michael D. Johnson, Sheperd S. Doeleman, Geoffrey C. Bower, Geoffrey B. Crew, Remo P. J. Tilanus, Tuomas Savolainen, C. M. Violette Impellizzeri, Antxon Alberdi, Anne-Kathrin Baczko, José L. Gómez, Ru-Sen Lu, Georgios F. Paraschos, Efthalia Traianou , et al. (265 additional authors not shown)

Abstract: The 2017 observing campaign of the Event Horizon Telescope (EHT) delivered the first very long baseline interferometry (VLBI) images at the observing frequency of 230 GHz, leading to a number of unique studies on black holes and relativistic jets from active galactic nuclei (AGN). In total, eighteen sources were observed: the main science targets, Sgr A* and M87 along with various calibrators. We… ▽ More The 2017 observing campaign of the Event Horizon Telescope (EHT) delivered the first very long baseline interferometry (VLBI) images at the observing frequency of 230 GHz, leading to a number of unique studies on black holes and relativistic jets from active galactic nuclei (AGN). In total, eighteen sources were observed: the main science targets, Sgr A* and M87 along with various calibrators. We investigated the morphology of the sixteen AGN in the EHT 2017 data set, focusing on the properties of the VLBI cores: size, flux density, and brightness temperature. We studied their dependence on the observing frequency in order to compare it with the Blandford-Königl (BK) jet model. We modeled the source structure of seven AGN in the EHT 2017 data set using linearly polarized circular Gaussian components and collected results for the other nine AGN from dedicated EHT publications, complemented by lower frequency data in the 2-86 GHz range. Then, we studied the dependences of the VLBI core flux density, size, and brightness temperature on the frequency measured in the AGN host frame. We compared the observations with the BK jet model and estimated the magnetic field strength dependence on the distance from the central black hole. Our results indicate a deviation from the standard BK model, particularly in the decrease of the brightness temperature with the observing frequency. Either bulk acceleration of the jet material, energy transfer from the magnetic field to the particles, or both are required to explain the observations. △ Less

Submitted 9 January, 2025; originally announced January 2025.

Journal ref: A&A 695, A233 (2025)

First Very Long Baseline Interferometry Detections at 870μm

Authors: Alexander W. Raymond, Sheperd S. Doeleman, Keiichi Asada, Lindy Blackburn, Geoffrey C. Bower, Michael Bremer, Dominique Broguiere, Ming-Tang Chen, Geoffrey B. Crew, Sven Dornbusch, Vincent L. Fish, Roberto García, Olivier Gentaz, Ciriaco Goddi, Chih-Chiang Han, Michael H. Hecht, Yau-De Huang, Michael Janssen, Garrett K. Keating, Jun Yi Koay, Thomas P. Krichbaum, Wen-Ping Lo, Satoki Matsushita, Lynn D. Matthews, James M. Moran , et al. (254 additional authors not shown)

Abstract: The first very long baseline interferometry (VLBI) detections at 870$μ$m wavelength (345$\,$GHz frequency) are reported, achieving the highest diffraction-limited angular resolution yet obtained from the surface of the Earth, and the highest-frequency example of the VLBI technique to date. These include strong detections for multiple sources observed on inter-continental baselines between telescop… ▽ More The first very long baseline interferometry (VLBI) detections at 870$μ$m wavelength (345$\,$GHz frequency) are reported, achieving the highest diffraction-limited angular resolution yet obtained from the surface of the Earth, and the highest-frequency example of the VLBI technique to date. These include strong detections for multiple sources observed on inter-continental baselines between telescopes in Chile, Hawaii, and Spain, obtained during observations in October 2018. The longest-baseline detections approach 11$\,$G$λ$ corresponding to an angular resolution, or fringe spacing, of 19$μ$as. The Allan deviation of the visibility phase at 870$μ$m is comparable to that at 1.3$\,$mm on the relevant integration time scales between 2 and 100$\,$s. The detections confirm that the sensitivity and signal chain stability of stations in the Event Horizon Telescope (EHT) array are suitable for VLBI observations at 870$μ$m. Operation at this short wavelength, combined with anticipated enhancements of the EHT, will lead to a unique high angular resolution instrument for black hole studies, capable of resolving the event horizons of supermassive black holes in both space and time. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Comments: Corresponding author: S. Doeleman

Journal ref: The Astronomical Journal, Volume 168, Issue 3, id.130, 19 pp. 2024

Local Transcription Models in Home Care Nursing in Switzerland: an Interdisciplinary Case Study

Authors: Jeremy Kramer, Tetiana Kravchenko, Beatrice Kaufmann, Friederike J. S. Thilo, Mascha Kurpicz-Briki

Abstract: Latest advances in the field of natural language processing (NLP) enable new use cases for different domains, including the medical sector. In particular, transcription can be used to support automation in the nursing documentation process and give nurses more time to interact with the patients. However, different challenges including (a) data privacy, (b) local languages and dialects, and (c) dom… ▽ More Latest advances in the field of natural language processing (NLP) enable new use cases for different domains, including the medical sector. In particular, transcription can be used to support automation in the nursing documentation process and give nurses more time to interact with the patients. However, different challenges including (a) data privacy, (b) local languages and dialects, and (c) domain-specific vocabulary need to be addressed. In this case study, we investigate the case of home care nursing documentation in Switzerland. We assessed different transcription tools and models, and conducted several experiments with OpenAI Whisper, involving different variations of German (i.e., dialects, foreign accent) and manually curated example texts by a domain expert of home care nursing. Our results indicate that even the used out-of-the-box model performs sufficiently well to be a good starting point for future research in the field. △ Less

Submitted 27 September, 2024; originally announced September 2024.

Low-Loss Higher-Order Cross-Sectional Lamé Mode SAW Devices in 10-20 GHz Range

Authors: Ian Anderson, Tzu-Hsuan Hsu, Vakhtang Chulukhadze, Jack Kramer, Sinwoo Cho, Omar A. Barrera, Joshua Campbell, Ming-Huang Li, Ruochen Lu

Abstract: This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous silicon on silicon carbide, where longitudinally dominant SAW was targeted. Upon fabrication, higher-order thickness-based cross-sectional Lamé modes and Rayleigh mo… ▽ More This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous silicon on silicon carbide, where longitudinally dominant SAW was targeted. Upon fabrication, higher-order thickness-based cross-sectional Lamé modes and Rayleigh modes were studied for their Q factors using acoustic delay lines. Utilizing bi-directional electrodes, ADL with lateral lambda values ranging from 0.4 um to 0.6 um were measured. Higher order Lame modes were found to have consistently higher Q factors than their Rayleigh mode counterpart, on the order of 1000-3000, showing high-frequency SAW devices as still viable candidates for frequency scaling without a substantial increase in loss. △ Less

Submitted 19 October, 2024; v1 submitted 21 September, 2024; originally announced September 2024.

Comments: 4 pages, 7 figures, accepted by IEEE UFFC-JS

3D hybrid fluid-particle jet simulations and the importance of synchrotron radiative losses

Authors: Joana A. Kramer, Nicholas R. MacDonald, Georgios F. Paraschos, L. Ricci

Abstract: Context. Relativistic jets in active galactic nuclei are known for their exceptional energy output, and imaging the synthetic synchrotron emission of numerical jet simulations is essential for a comparison with observed jet polarization emission. Aims. Through the use of 3D hybrid fluid-particle jet simulations (with the PLUTO code), we overcome some of the commonly made assumptions in relativisti… ▽ More Context. Relativistic jets in active galactic nuclei are known for their exceptional energy output, and imaging the synthetic synchrotron emission of numerical jet simulations is essential for a comparison with observed jet polarization emission. Aims. Through the use of 3D hybrid fluid-particle jet simulations (with the PLUTO code), we overcome some of the commonly made assumptions in relativistic magnetohydrodynamic (RMHD) simulations by using non-thermal particle attributes to account for the resulting synchrotron radiation. Polarized radiative transfer and ray-tracing (via the RADMC-3D code) highlight the differences in total intensity maps when (i) the jet is simulated purely with the RMHD approach, (ii) a jet tracer is considered in the RMHD approach, and (iii) a hybrid fluid-particle approach is used. The resulting emission maps were compared to the example of the radio galaxy Centaurus A. Methods. We applied the Lagrangian particle module implemented in the latest version of the PLUTO code. This new module contains a state-of-the-art algorithm for modeling diffusive shock acceleration and for accounting for radiative losses in RMHD jet simulations. The module implements the physical postulates missing in RMHD jet simulations by accounting for a cooled ambient medium and strengthening the central jet emission. Results. We find a distinction between the innermost structure of the jet and the back-flowing material by mimicking the radio emission of the Seyfert II radio galaxy Centaurus A when considering an edge-brightened jet with an underlying purely toroidal magnetic field. We demonstrate the necessity of synchrotron cooling as well as the improvements gained when directly accounting for non-thermal synchrotron radiation via non-thermal particles. △ Less

Submitted 10 September, 2024; v1 submitted 8 September, 2024; originally announced September 2024.

Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch

Authors: Cameron J. Kopas, Dominic P. Goronzy, Thang Pham, Carlos G. Torres Castanedo, Matthew Cheng, Rory Cochrane, Patrick Nast, Ella Lachman, Nikolay Z. Zhelev, Andre Vallieres, Akshay A. Murthy, Jin-su Oh, Lin Zhou, Matthew J. Kramer, Hilal Cansizoglu, Michael J. Bedzyk, Vinayak P. Dravid, Alexander Romanenko, Anna Grassellino, Josh Y. Mutus, Mark C. Hersam, Kameshwar Yadavalli

Abstract: The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and t… ▽ More The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS. △ Less

Submitted 5 August, 2024; originally announced August 2024.

A Community-Centric Perspective for Characterizing and Detecting Anti-Asian Violence-Provoking Speech

Authors: Gaurav Verma, Rynaa Grover, Jiawei Zhou, Binny Mathew, Jordan Kraemer, Munmun De Choudhury, Srijan Kumar

Abstract: Violence-provoking speech -- speech that implicitly or explicitly promotes violence against the members of the targeted community, contributed to a massive surge in anti-Asian crimes during the pandemic. While previous works have characterized and built tools for detecting other forms of harmful speech, like fear speech and hate speech, our work takes a community-centric approach to studying anti-… ▽ More Violence-provoking speech -- speech that implicitly or explicitly promotes violence against the members of the targeted community, contributed to a massive surge in anti-Asian crimes during the pandemic. While previous works have characterized and built tools for detecting other forms of harmful speech, like fear speech and hate speech, our work takes a community-centric approach to studying anti-Asian violence-provoking speech. Using data from ~420k Twitter posts spanning a 3-year duration (January 1, 2020 to February 1, 2023), we develop a codebook to characterize anti-Asian violence-provoking speech and collect a community-crowdsourced dataset to facilitate its large-scale detection using state-of-the-art classifiers. We contrast the capabilities of natural language processing classifiers, ranging from BERT-based to LLM-based classifiers, in detecting violence-provoking speech with their capabilities to detect anti-Asian hateful speech. In contrast to prior work that has demonstrated the effectiveness of such classifiers in detecting hateful speech ($F_1 = 0.89$), our work shows that accurate and reliable detection of violence-provoking speech is a challenging task ($F_1 = 0.69$). We discuss the implications of our findings, particularly the need for proactive interventions to support Asian communities during public health crises. The resources related to the study are available at https://claws-lab.github.io/violence-provoking-speech/. △ Less

Submitted 21 July, 2024; originally announced July 2024.

Comments: Accepted to ACL 2024 Main

18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector

Authors: Omar Barrera, Nishanth Ravi, Kapil Saha, Supratik Dasgupta, Joshua Campbell, Jack Kramer, Eugene Kwon, Tzu-Hsuan Hsu, Sinwoo Cho, Ian Anderson, Pietro Simeoni, Jue Hou, Matteo Rinaldi, Mark S. Goorsky, Ruochen Lu

Abstract: This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator… ▽ More This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator shows a coupling coefficient (k2) of 2.0%, high series quality factor (Qs) of 156, shunt quality factor (Qp) of 142, and maximum Bode quality factor (Qmax) of 210. The third-order harmonics at 59.64 GHz is also observed with k2 around 0.6% and Q around 40. Upon further development, the reported acoustic resonator platform can enable various front-end signal-processing functions, e.g., filters and oscillators, at future frequency range 3 (FR3) bands. △ Less

Submitted 7 September, 2024; v1 submitted 2 July, 2024; originally announced July 2024.

Comments: 5 pages, 9 figures, 5 tables

Journal ref: Journal of Microelectromechanical Systems, 2024

Acoustic and Electromagnetic Co-Modeling of Piezoelectric Devices at Millimeter Wave

Authors: Tianyi Zhang, Yen-Wei Chang, Omar Barrera, Naveed Ahmed, Jack Kramer, Ruochen Lu

Abstract: This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and electromagnetic (EM) effects, e.g., self-inductance, in both the circuit-level fitting and finite element analysis, toward higher accuracy at higher frequencies. To validat… ▽ More This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and electromagnetic (EM) effects, e.g., self-inductance, in both the circuit-level fitting and finite element analysis, toward higher accuracy at higher frequencies. To validate the method, thin-film lithium niobate (LiNbO3) first-order antisymmetric (A1) mode devices are used as the testbed, achieving great agreement for both the standalone resonators and a fifth-order ladder filter. Upon further development, the reported acoustic and EM co-modeling could guide the future design of compact piezoelectric devices at mmWave and beyond. △ Less

Submitted 20 June, 2024; v1 submitted 29 May, 2024; originally announced May 2024.

Comments: 6 pages, 11 figures, submitted to IEEE JMEMS

2 to 16 GHz Fundamental Symmetric Mode Acoustic Resonators in Piezoelectric Thin-Film Lithium Niobate

Authors: Vakhtang Chulukhadze, Jack Kramer, Tzu-Hsuan Hsu, Omar Barrera, Ian Anderson, Sinwoo Cho, Joshua Campbell, Ruochen Lu

Abstract: As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode en… ▽ More As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode enable monolithic multi-frequency fabrication, transversal filters, correlators, and other compact signal processing components. In this work, we present thin-film lithium niobate (LN) S0 resonators scaled up to 16 GHz. Specifically, we study the characteristics of the S0 mode as the wavelength is minimized and showcase a device at 14.9 GHz with a Bode Q maximum of 391, a k2 of 6%, and a figure of merit (FoM) of 23.33, surpassing the state-of-the-art (SoA) in its frequency range. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 4 pages, 8 figures, to be presetned in Hilton Head 2024,the 19th in the series of Hilton Head Workshops on the science and technology of solid-state sensors, actuators, and microsystems

Ultra-Wideband Tapered Transducers in Thin-Film Lithium Niobate on Silicon Carbide

Authors: Jack Kramer, Tzu-Hsuan Hsu, Joshua Campbell, Ruochen Lu

Abstract: Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome th… ▽ More Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome this limitation. The design is realized on a lithium niobate (LN) on silicon carbide platform, utilizing a combination of first and higher order shear-horizontal modes to generate the ultra-wideband response. The implementation shows a fractional bandwidth (FBW) of 55% at 2.23 GHz with an associated insertion loss (IL) of 26 dB for the measured 50 ohm case. Upon improved impedance matching, this performance could be improved to 79% FBW and an IL of 16.5 dB. Upon further development, this ultra-wideband design could be reasonably scaled towards improved FBW and IL trade off to enable improved usability for cases where bandwidth should be prioritized. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 4 pages, 5 figures, to be presetned in Hilton Head 2024,the 19th in the series of Hilton Head Workshops on the science and technology of solid-state sensors, actuators, and microsystems

Radar-Based Localization For Autonomous Ground Vehicles In Suburban Neighborhoods

Authors: Andrew J. Kramer, Christoffer Heckman

Abstract: For autonomous ground vehicles (AGVs) deployed in suburban neighborhoods and other human-centric environments the problem of localization remains a fundamental challenge. There are well established methods for localization with GPS, lidar, and cameras. But even in ideal conditions these have limitations. GPS is not always available and is often not accurate enough on its own, visual methods have d… ▽ More For autonomous ground vehicles (AGVs) deployed in suburban neighborhoods and other human-centric environments the problem of localization remains a fundamental challenge. There are well established methods for localization with GPS, lidar, and cameras. But even in ideal conditions these have limitations. GPS is not always available and is often not accurate enough on its own, visual methods have difficulty coping with appearance changes due to weather and other factors, and lidar methods are prone to defective solutions due to ambiguous scene geometry. Radar on the other hand is not highly susceptible to these problems, owing in part to its longer range. Further, radar is also robust to challenging conditions that interfere with vision and lidar including fog, smoke, rain, and darkness. We present a radar-based localization system that includes a novel method for highly-accurate radar odometry for smooth, high-frequency relative pose estimation and a novel method for radar-based place recognition and relocalization. We present experiments demonstrating our methods' accuracy and reliability, which are comparable with \new{other methods' published results for radar localization and we find outperform a similar method as ours applied to lidar measurements}. Further, we show our methods are lightweight enough to run on common low-power embedded hardware with ample headroom for other autonomy functions. △ Less

Submitted 1 May, 2024; originally announced May 2024.

Comments: Accepted to Field Robotics, 1. May 2024

Evidence for a toroidal magnetic field in the core of 3C 84

Authors: G. F. Paraschos, L. C. Debbrecht, J. A. Kramer, E. Traianou, I. Liodakis, T. P. Krichbaum, J. -Y. Kim, M. Janssen, D. G. Nair, T. Savolainen, E. Ros, U. Bach, J. A. Hodgson, M. Lisakov, N. R. MacDonald, J. A. Zensus

Abstract: The spatial scales of relativistic radio jets, probed by relativistic magneto-hydrodynamic jet launching simulations (RMHDs) and by most very-long-baseline interferometry (VLBI) observations differ by an order of magnitude. Bridging the gap between these RMHD simulations and VLBI observations requires selecting nearby active galactic nuclei (AGN), the parsec-scale region of which can be resolved.… ▽ More The spatial scales of relativistic radio jets, probed by relativistic magneto-hydrodynamic jet launching simulations (RMHDs) and by most very-long-baseline interferometry (VLBI) observations differ by an order of magnitude. Bridging the gap between these RMHD simulations and VLBI observations requires selecting nearby active galactic nuclei (AGN), the parsec-scale region of which can be resolved. 3C 84 is a nearby bright AGN fulfilling the necessary requirements: it is launching a powerful, relativistic jet powered by a central supermassive black hole, while also being very bright. Using 22 GHz global VLBI measurements of 3C 84 we aim to study its sub-parsec region in both total intensity and linear polarisation, to explore the properties of this jet, with a linear resolution of $\sim0.1$ parsec. We test different simulation setups by altering the bulk Lorentz factor $Γ$ of the jet, as well as the magnetic field configuration (toroidal, poloidal, helical). We confirm the persistence of a limb brightened structure, which reaches deep into the sub-parsec region. The corresponding electric vector position angles (EVPAs) follow the bulk jet flow inside but tend to be orthogonal to it near the edges. Our state-of-the-art RMHD simulations show that this geometry is consistent with a spine-sheath model, associated with a mildly relativistic flow and a toroidal magnetic field configuration. △ Less

Submitted 15 May, 2024; v1 submitted 30 April, 2024; originally announced May 2024.

Comments: 10 pages, 8 figures, accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 686, L5 (2024)

Broadband Multi-wavelength Properties of M87 during the 2018 EHT Campaign including a Very High Energy Flaring Episode

Authors: J. C. Algaba, M. Balokovic, S. Chandra, W. Y. Cheong, Y. Z. Cui, F. D'Ammando, A. D. Falcone, N. M. Ford, M. Giroletti, C. Goddi, M. A. Gurwell, K. Hada, D. Haggard, S. Jorstad, A. Kaur, T. Kawashima, S. Kerby, J. Y. Kim, M. Kino, E. V. Kravchenko, S. S. Lee, R. S. Lu, S. Markoff, J. Michail, J. Neilsen , et al. (721 additional authors not shown)

Abstract: The nearby elliptical galaxy M87 contains one of the only two supermassive black holes whose emission surrounding the event horizon has been imaged by the Event Horizon Telescope (EHT). In 2018, more than two dozen multi-wavelength (MWL) facilities (from radio to gamma-ray energies) took part in the second M87 EHT campaign. The goal of this extensive MWL campaign was to better understand the physi… ▽ More The nearby elliptical galaxy M87 contains one of the only two supermassive black holes whose emission surrounding the event horizon has been imaged by the Event Horizon Telescope (EHT). In 2018, more than two dozen multi-wavelength (MWL) facilities (from radio to gamma-ray energies) took part in the second M87 EHT campaign. The goal of this extensive MWL campaign was to better understand the physics of the accreting black hole M87*, the relationship between the inflow and inner jets, and the high-energy particle acceleration. Understanding the complex astrophysics is also a necessary first step towards performing further tests of general relativity. The MWL campaign took place in April 2018, overlapping with the EHT M87* observations. We present a new, contemporaneous spectral energy distribution (SED) ranging from radio to very high energy (VHE) gamma-rays, as well as details of the individual observations and light curves. We also conduct phenomenological modelling to investigate the basic source properties. We present the first VHE gamma-ray flare from M87 detected since 2010. The flux above 350 GeV has more than doubled within a period of about 36 hours. We find that the X-ray flux is enhanced by about a factor of two compared to 2017, while the radio and millimetre core fluxes are consistent between 2017 and 2018. We detect evidence for a monotonically increasing jet position angle that corresponds to variations in the bright spot of the EHT image. Our results show the value of continued MWL monitoring together with precision imaging for addressing the origins of high-energy particle acceleration. While we cannot currently pinpoint the precise location where such acceleration takes place, the new VHE gamma-ray flare already presents a challenge to simple one-zone leptonic emission model approaches, and emphasises the need for combined image and spectral modelling. △ Less

Submitted 5 December, 2024; v1 submitted 24 April, 2024; originally announced April 2024.

Comments: 46 pages, 23 figures, accepted by Astronomy & Astrophysics on August. 29, 2024

Journal ref: A&A 692, A140 (2024)

Sup-norm bounds for Jacobi cusp forms

Authors: Anilatmaja Aryasomayajula, Jürg Kramer, Anna-Maria von Pippich

Abstract: In this article, we give $L^{\infty}$-norm bounds for the natural invariant norm of cusp forms of real weight $k$ and character $χ$ for any cofinite Fuchsian subgroup $Γ\subset\mathrm{SL}_{2}(\mathbb{R})$. Using the representation of Jacobi cusp forms of integral weight $k$ and index $m$ for the modular group $Γ_{0}=\mathrm{SL}_{2}(\mathbb{Z})$ as linear combinations of modular forms of weight… ▽ More In this article, we give $L^{\infty}$-norm bounds for the natural invariant norm of cusp forms of real weight $k$ and character $χ$ for any cofinite Fuchsian subgroup $Γ\subset\mathrm{SL}_{2}(\mathbb{R})$. Using the representation of Jacobi cusp forms of integral weight $k$ and index $m$ for the modular group $Γ_{0}=\mathrm{SL}_{2}(\mathbb{Z})$ as linear combinations of modular forms of weight $k-\frac{1}{2}$ for some congruence subgroup of $Γ_{0}$ (depending on $m$) and suitable Jacobi theta functions, we derive $L^{\infty}$-norm bounds for the natural invariant norm of these Jacobi cusp forms. More specifically, letting $J_{k,m}^{\mathrm{cusp}}(Γ_{0})$ denote the complex vector space of Jacobi cusp forms under consideration and $\Vert\cdot\Vert_{\mathrm{Pet}}$ the pointwise Petersson norm on $J_{k,m}^{\mathrm{cusp}}(Γ_ {0})$, we prove that for $k\in\mathbb{Z}_{\ge 5}$ and $m\in\mathbb{Z}_{\ge 1}$, and a given $ε>0$, the $L^{\infty}$-norm bound \begin{align*} \Vertφ\Vert_{L^{\infty}}=\sup_{(τ,z)\in\mathbb{H}\times\mathbb{C}}\Vertφ(τ,z)\Vert_{\mathrm{Pet}}=O_{Γ_{0},ε}\big(k\,m^{\frac {7}{4}+ε}\big) \end{align*} holds for any $φ\in J_{k,m}^{\mathrm{cusp}}(Γ_{0})$, which is $L^{2}$-normalized with respect to the Petersson inner product, where the implied constant depends on $Γ_{0}$ and the choice of $ε>0$. △ Less

Submitted 31 January, 2025; v1 submitted 21 April, 2024; originally announced April 2024.

MSC Class: 11F11; 11F12

Analytic approximations for massive close post-mass transfer binary systems

Authors: Christoph Schürmann, Norbert Langer, Joana A. Kramer, Pablo Marchant, Chen Wang, Koushik Sen

Abstract: Massive binary evolution models are needed to predict massive star populations in star forming galaxies, the supernova diversity, and the number and properties of gravitational wave sources. Such models are often computed using so called rapid binary evolution codes, which approximate the evolution of the binary components based on detailed single star models. However, about one third of the inter… ▽ More Massive binary evolution models are needed to predict massive star populations in star forming galaxies, the supernova diversity, and the number and properties of gravitational wave sources. Such models are often computed using so called rapid binary evolution codes, which approximate the evolution of the binary components based on detailed single star models. However, about one third of the interacting massive binary stars undergo mass transfer during core hydrogen burning (Case A mass transfer), whose outcome is difficult to derive from single star models. Here, we use a large grid of detailed binary evolution models for primaries in the initial mass range 10 to 40 Solar masses of LMC and SMC composition, to derive analytic fits for the key quantities needed in rapid binary evolution codes, i.e., the duration of core hydrogen burning, and the resulting donor star mass. Systems with shorter orbital periods produce up to 50% lighter stripped donors and have a up to 30% larger lifetime than wider systems. We find that both quantities depend strongly on the initial binary orbital period, but that the initial mass ratio and the mass transfer efficiency of the binary have little impact on the outcome. Our results are easily parameterisable and can be used to capture the effects of Case A mass transfer more accurately in rapid binary evolution codes. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Comments: 10 pages

Journal ref: A&A 690, A282 (2024)

On the height of the universal abelian variety

Authors: José Ignacio Burgos Gil, Jürg Kramer

Abstract: In this paper we extend the arithmetic intersection theory of adelic divisors on quasiprojective varieties developed by X. Yuan and S. W. Zhang to cover certain adelic arithmetic divisors that are not nef nor integrable. The key concept used in this extension is the relative finite energy introduced by T. Darvas, E. Di Nezza, and C. H. Lu. As an application, we prove that the line bundle of Siegel… ▽ More In this paper we extend the arithmetic intersection theory of adelic divisors on quasiprojective varieties developed by X. Yuan and S. W. Zhang to cover certain adelic arithmetic divisors that are not nef nor integrable. The key concept used in this extension is the relative finite energy introduced by T. Darvas, E. Di Nezza, and C. H. Lu. As an application, we prove that the line bundle of Siegel--Jacobi forms on the universal abelian variety endowed with its invariant hermitian metric is not integrable but we compute its arithmetic self-intersection number using the new extension. The techniques developed in this paper can be applied in many other situations like mixed Shimura varieties or the moduli space of stable marked curves. △ Less

Submitted 10 February, 2025; v1 submitted 18 March, 2024; originally announced March 2024.

MSC Class: 14G40; 14G35; 11G18; 11F50; 32U05

Experimental Study of Periodically Poled Piezoelectric Film Lithium Niobate Resonator at Cryogenic Temperatures

Authors: Jack Kramer, Omar Barrera, Sinwoo Cho, Vakhtang Chulukhadze, Tzu-Hsuan Hsu, Ruochen Lu

Abstract: This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80°K and 297°K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thic… ▽ More This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80°K and 297°K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thickness-shear Lamb modes between second-order symmetric (S2) and eleventh-order antisymmetric (A11) modes show temperature coefficients of frequency (TCF) averaging -68.8 ppm/K. Higher Q and more pronounced spurious modes are observed at lower temperatures for many modes. Upon further study, the cryogenic study will be crucial for identifying dominant loss mechanisms and origins of spurious modes in higher-order Lamb wave devices for millimeter-wave applications. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 4 pages, 4 figures, submitted to IEEE IMS 2024

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Authors: Tzu-Hsuan Hsu, Joshua Campbell, Jack Kramer, Sinwoo Cho, Ming-Huang Li, Ruochen Lu

Abstract: In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide (SiC) platform, featuring an excellent figure-of-merit (FoM = kt2*Q ) of 124 at 6.5 GHz, the highest FoM reported in this frequency range. The resonator frequenc… ▽ More In this work, we demonstrate a C-band shear-horizontal surface acoustic wave (SH-SAW) resonator with high electromechanical coupling (kt2) of 22% and a quality factor (Q) of 565 based on a thin-film lithium niobate (LN) on silicon carbide (SiC) platform, featuring an excellent figure-of-merit (FoM = kt2*Q ) of 124 at 6.5 GHz, the highest FoM reported in this frequency range. The resonator frequency upscaling is achieved through wavelength ($λ$) reduction and the use of thin aluminum (Al) electrodes. The LN/SiC waveguide and synchronous resonator design collectively enable effective acoustic energy confinement for a high FoM, even when the normalized thickness of LN approaches a scale of 0.5$λ$ to 1$λ$. To perform a comprehensive study, we also designed and fabricated five additional resonators, expending the $λ$ studied ranging from 480 to 800 nm, in the same 500 nm-thick transferred Y-cut thin-film LN on SiC. The fabricated SH-SAW resonators, operating from 5 to 8 GHz, experimentally demonstrate a kt2 from 20.3% to 22.9% and a Q from 350 to 575, thereby covering the entire C-band with excellent performance. △ Less

Submitted 4 August, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Comments: 4 pages, 5 figures, 1 table

Journal ref: Journal of Microelectromechanical Systems, 2024, Early Access

23.8-GHz Acoustic Filter in Periodically Poled Piezoelectric Film Lithium Niobate With 1.52-dB IL and 19.4% FBW

Authors: Sinwoo Cho, Omar Barrera, Jack Kramer, Vakhtang Chulukhadze, Tzu-Hsuan Hsu, Joshua Campbell, Ian Anderson, Ruochen Lu

Abstract: This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y… ▽ More This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y-cut LiNbO3 thin film, operating in second-order symmetric (S2) Lamb mode. The record-breaking performance is enabled by the P3F LiNbO3 platform, where piezoelectric thin films of alternating orientations are transferred subsequently, facilitating efficient higher-order Lamb mode operation with simultaneously high quality factor (Q) and coupling coefficient (k2) at millimeter-wave (mmWave). Also, the multi-layer P3F stack promises smaller footprints and better nonlinearity than single-layer counterparts, thanks to the higher capacitance density and lower thermal resistance. Upon further development, the reported P3F LiNbO3 platform is promising for compact filters at mmWave. △ Less

Submitted 28 June, 2024; v1 submitted 19 February, 2024; originally announced February 2024.

Comments: 4 pages, 7 figures, IEEE Microwave and Wireless Technology Letters

Journal ref: IEEE Microwave and Wireless Technology Letters, vol. 34, no. 4, pp. 391-394, April 2024

Thin-film Lithium Niobate on Insulator Surface Acoustic Wave Devices for 6G Centimeter Bands

Authors: Tzu-Hsuan Hsu, Joshua Campbell, Jack Kramer, Sinwoo Cho, Zhi-Qiang Lee, Ming-Huang Li, Ruochen Lu

Abstract: In this work, we investigate the frequency scaling of shear-horizontal (S.H.) surface acoustic wave (SAW) resonators based on a lithium niobate on insulator (LNOI) substrate into the centimeter bands for 6G wireless systems. Prototyped resonators with wavelengths ranging between 240 nm and 400 nm were fabricated, and the experimental results exhibit a successful frequency scaling between 9.05 and… ▽ More In this work, we investigate the frequency scaling of shear-horizontal (S.H.) surface acoustic wave (SAW) resonators based on a lithium niobate on insulator (LNOI) substrate into the centimeter bands for 6G wireless systems. Prototyped resonators with wavelengths ranging between 240 nm and 400 nm were fabricated, and the experimental results exhibit a successful frequency scaling between 9.05 and 13.37 GHz. However, a noticeable performance degradation can be observed as the resonance frequency (fs) scales. Such an effect is expected to be caused by non-ideal helec/λ for smaller λ devices. The optimized LNOI SH-SAW with a λ of 400 nm exhibits a fs of 9.05 GHz, a keff2 of 15%, Qmax of 213 and a FoM of 32, which indicates a successful implementation for device targeting centimeter bands. △ Less

Submitted 25 February, 2024; v1 submitted 18 February, 2024; originally announced February 2024.

Comments: 4 pages, 7 figures, 1 table, submitted to IEEE IC-MAM 2024

Journal ref: 2024 IEEE MTT-S International Conference on Microwave Acoustics & Mechanics (IC-MAM), Chengdu, China, 2024, pp. 117-120

Ordered magnetic fields around the 3C 84 central black hole

Authors: G. F. Paraschos, J. -Y. Kim, M. Wielgus, J. Röder, T. P. Krichbaum, E. Ros, I. Agudo, I. Myserlis, M. Moscibrodzka, E. Traianou, J. A. Zensus, L. Blackburn, C. -K. Chan, S. Issaoun, M. Janssen, M. D. Johnson, V. L. Fish, K. Akiyama, A. Alberdi, W. Alef, J. C. Algaba, R. Anantua, K. Asada, R. Azulay, U. Bach , et al. (258 additional authors not shown)

Abstract: 3C84 is a nearby radio source with a complex total intensity structure, showing linear polarisation and spectral patterns. A detailed investigation of the central engine region necessitates the use of VLBI above the hitherto available maximum frequency of 86GHz. Using ultrahigh resolution VLBI observations at the highest available frequency of 228GHz, we aim to directly detect compact structures a… ▽ More 3C84 is a nearby radio source with a complex total intensity structure, showing linear polarisation and spectral patterns. A detailed investigation of the central engine region necessitates the use of VLBI above the hitherto available maximum frequency of 86GHz. Using ultrahigh resolution VLBI observations at the highest available frequency of 228GHz, we aim to directly detect compact structures and understand the physical conditions in the compact region of 3C84. We used EHT 228GHz observations and, given the limited (u,v)-coverage, applied geometric model fitting to the data. We also employed quasi-simultaneously observed, multi-frequency VLBI data for the source in order to carry out a comprehensive analysis of the core structure. We report the detection of a highly ordered, strong magnetic field around the central, SMBH of 3C84. The brightness temperature analysis suggests that the system is in equipartition. We determined a turnover frequency of $ν_m=(113\pm4)$GHz, a corresponding synchrotron self-absorbed magnetic field of $B_{SSA}=(2.9\pm1.6)$G, and an equipartition magnetic field of $B_{eq}=(5.2\pm0.6)$G. Three components are resolved with the highest fractional polarisation detected for this object ($m_\textrm{net}=(17.0\pm3.9)$%). The positions of the components are compatible with those seen in low-frequency VLBI observations since 2017-2018. We report a steeply negative slope of the spectrum at 228GHz. We used these findings to test models of jet formation, propagation, and Faraday rotation in 3C84. The findings of our investigation into different flow geometries and black hole spins support an advection-dominated accretion flow in a magnetically arrested state around a rapidly rotating supermassive black hole as a model of the jet-launching system in the core of 3C84. However, systematic uncertainties due to the limited (u,v)-coverage, however, cannot be ignored. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 15 pages, 6 figures, published in A&A

Journal ref: Issue: A&A Volume 682, February 2024; Article number: L3; Number of pages: 15

Alternating Bias Assisted Annealing of Amorphous Oxide Tunnel Junctions

Authors: David P. Pappas, Mark Field, Cameron Kopas, Joel A. Howard, Xiqiao Wang, Ella Lachman, Lin Zhou, Jinsu Oh, Kameshwar Yadavalli, Eyob A. Sete, Andrew Bestwick, Matthew J. Kramer, Joshua Y. Mutus

Abstract: We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongl… ▽ More We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongly temperature-dependent, and is independent of junction size in the sub-micron regime. In order to measure their tunneling properties at mK temperatures, we characterized transmon qubit junctions treated with this alternating-bias assisted annealing (ABAA) technique. The measured frequencies follow the Ambegaokar-Baratoff relation between the shifted resistance and critical current. Further, these studies show a reduction of junction-contributed loss on the order of $\approx 2 \times10^{-6}$, along with a significant reduction in resonant- and off-resonant-two level system defects when compared to untreated samples. Imaging with high-resolution TEM shows that the barrier is still predominantly amorphous with a more uniform distribution of aluminum coordination across the barrier relative to untreated junctions. This new approach is expected to be widely applicable to a broad range of devices that rely on amorphous aluminum oxide, as well as the many other metal-insulator-metal structures used in modern electronics. △ Less

Submitted 16 August, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Journal ref: Communications Materials volume 5, Article number: 150 (2024)

Bulk synthesis of Zn$_3$WN$_4$ via solid-state metathesis

Authors: Christopher L. Rom, Shaun O'Donnell, Kayla Huang, Ryan A. Klein, Morgan J. Kramer, Rebecca W. Smaha, Andriy Zakutayev

Abstract: Ternary nitrides are of growing technological importance, with applications as semiconductors, catalysts, and magnetic materials; however, new synthetic tools are needed to advance materials discovery efforts. Here, we show that Zn$_3$WN$_4$ can be synthesized via metathesis reactions between Li$_6$WN$_4$ and Zn$X_2$ ($X$ = Br, Cl, F). In situ synchrotron powder X-ray diffraction and differential… ▽ More Ternary nitrides are of growing technological importance, with applications as semiconductors, catalysts, and magnetic materials; however, new synthetic tools are needed to advance materials discovery efforts. Here, we show that Zn$_3$WN$_4$ can be synthesized via metathesis reactions between Li$_6$WN$_4$ and Zn$X_2$ ($X$ = Br, Cl, F). In situ synchrotron powder X-ray diffraction and differential scanning calorimetry show that the reaction onset is correlated with the Zn$X_2$ melting point and that product purity is inversely correlated with the reaction's exothermicity. High resolution synchrotron powder X-ray diffraction measurements show that this bulk synthesis produces a structure with substantial cation ordering, as opposed to the disordered structure initially discovered via thin film sputtering. Diffuse reflectance spectroscopy reveals that Zn$_3$WN$_4$ powders exhibit two optical absorption onsets at 2.5 eV and 4.0 eV, indicating wide-bandgap semiconducting behavior and suggesting a small amount of structural disorder. We hypothesize that this synthesis strategy is generalizable because many potential Li-$M$-N precursors (where $M$ is a metal) are available for synthesizing new ternary nitride materials. This work introduces a promising synthesis strategy that will accelerate the discovery of novel functional ternary nitrides and other currently inaccessible materials. △ Less

Submitted 5 January, 2024; v1 submitted 3 January, 2024; originally announced January 2024.

Journal ref: Chem. Sci. 2024

Multi-ion frequency reference using dynamical decoupling

Authors: Lennart Pelzer, Kai Dietze, Víctor J. Martínez-Lahuerta, Ludwig Krinner, Johannes Kramer, Fabian Dawel, Nicolas C. H. Spethmann, Klemens Hammerer, Piet O. Schmidt

Abstract: We present the experimental realization of a continuous dynamical decoupling scheme which suppresses leading frequency shifts in a multi-ion frequency reference based on $^{40}\mathrm{Ca}^+$. By near-resonant magnetic coupling of the $^2\mathrm{S}_{1/2}$ and $^2\mathrm{D}_{5/2}$ Zeeman sub-levels using radio-frequency dressing fields, engineered transitions with reduced sensitivity to magnetic-fie… ▽ More We present the experimental realization of a continuous dynamical decoupling scheme which suppresses leading frequency shifts in a multi-ion frequency reference based on $^{40}\mathrm{Ca}^+$. By near-resonant magnetic coupling of the $^2\mathrm{S}_{1/2}$ and $^2\mathrm{D}_{5/2}$ Zeeman sub-levels using radio-frequency dressing fields, engineered transitions with reduced sensitivity to magnetic-field fluctuations are obtained. A second stage detuned dressing field reduces the influence of amplitude noise in the first stage driving fields and decreases 2\textsuperscript{nd}-rank tensor shifts, such as the electric quadrupole shift. Suppression of the quadratic dependence of the quadrupole shift to $3(2)\,\text{mHz}/μm^2$ and coherence times of $290(20)\,\text{ms}$ on the optical transition are demonstrated even within a laboratory environment with significant magnetic field noise. Besides removing inhomogeneous line shifts in multi-ion clocks, the demonstrated dynamical decoupling technique may find applications in quantum computing and simulation with trapped ions by a tailored design of decoherence-free subspaces. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 9 pages, 5 figures

Millimeter Wave Thin-Film Bulk Acoustic Resonator in Sputtered Scandium Aluminum Nitride Using Platinum Electrodes

Authors: Sinwoo Cho, Omar Barrera, Pietro Simeoni, Ellie Y. Wang, Jack Kramer, Vakhtang Chulukhadze, Joshua Campbell, Matteo Rinaldi, Ruochen Lu

Abstract: This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at millimeter wave (mmWave) with high quality factor (Q) using platinum (Pt) electrodes. FBARs with combinations of Pt and aluminum (Al) electrodes, i.e., Al top Al bottom, Pt top Al bottom, Al top Pt bottom, and Pt top Pt bottom, are built to study the impact of electrodes on mmWave FBARs. Th… ▽ More This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at millimeter wave (mmWave) with high quality factor (Q) using platinum (Pt) electrodes. FBARs with combinations of Pt and aluminum (Al) electrodes, i.e., Al top Al bottom, Pt top Al bottom, Al top Pt bottom, and Pt top Pt bottom, are built to study the impact of electrodes on mmWave FBARs. The demonstrated FBAR with Pt top and bottom electrodes achieve electromechanical coupling (k2) of 4.0% and Q of 116 for the first-order symmetric (S1) mode at 13.7 GHz, and k2 of 1.8% and Q of 94 for third-order symmetric (S3) mode at 61.6 GHz. Through these results, we confirmed that even in the frequency band of approximately 60 GHz, ScAlN FBAR can achieve a Q factor approaching 100 with optimized fabrication and acoustic/EM design. Further development calls for stacks with better quality in piezoelectric and metallic layers. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 4 pages, 7 figures, accepted by IEEE MEMS 2024

Transferred Thin Film Lithium Niobate as Millimeter Wave Acoustic Filter Platforms

Authors: Omar Barrera, Sinwoo Cho, Kenny Hyunh, Jack Kramer, Michael Liao, Vakhtang Chulukhadze, Lezli Matto, Mark S. Goorsky, Ruochen Lu

Abstract: This paper reports the first high-performance acoustic filters toward millimeter wave (mmWave) bands using transferred single-crystal thin film lithium niobate (LiNbO3). By transferring LiNbO3 on the top of silicon (Si) and sapphire (Al2O3) substrates with an intermediate amorphous Si (aSi) bonding and sacrificial layer, we demonstrate compact acoustic filters with record-breaking performance beyo… ▽ More This paper reports the first high-performance acoustic filters toward millimeter wave (mmWave) bands using transferred single-crystal thin film lithium niobate (LiNbO3). By transferring LiNbO3 on the top of silicon (Si) and sapphire (Al2O3) substrates with an intermediate amorphous Si (aSi) bonding and sacrificial layer, we demonstrate compact acoustic filters with record-breaking performance beyond 20 GHz. In the LN-aSi-Al2O3 platform, the third-order ladder filter exhibits low insertion loss (IL) of 1.62 dB and 3-dB fractional bandwidth (FBW) of 19.8% at 22.1 GHz, while in the LN-aSi-Si platform, the filter shows low IL of 2.38 dB and FBW of 18.2% at 23.5 GHz. Material analysis validates the great crystalline quality of the stacks. The high-resolution x-ray diffraction (HRXRD) shows full width half maximum (FWHM) of 53 arcsec for Al2O3 and 206 arcsec for Si, both remarkably low compared to piezoelectric thin films of similar thickness. The reported results bring the state-of-the-art (SoA) of compact acoustic filters to much higher frequencies, and highlight transferred LiNbO3 as promising platforms for mmWave filters in future wireless front ends. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Comments: 4 pages, 8 figures, accepted by IEEE MEMS 2024

Coherent photo-thermal noise cancellation in a dual-wavelength optical cavity for narrow-linewidth laser frequency stabilisation

Authors: Fabian Dawel, Alexander Wilzewski, Sofia Herbers, Lennart Pelzer, Johannes Kramer, Marek B. Hild, Kai Dietze, Ludwig Krinner, Nicolas C. H. Spethmann, Piet O. Schmidt

Abstract: Optical resonators are used for the realisation of ultra-stable frequency lasers. The use of high reflectivity multi-band coatings allows the frequency locking of several lasers of different wavelengths to a single cavity. While the noise processes for single wavelength cavities are well known, the correlation caused by multi-stack coatings has as yet not been analysed experimentally. In our work,… ▽ More Optical resonators are used for the realisation of ultra-stable frequency lasers. The use of high reflectivity multi-band coatings allows the frequency locking of several lasers of different wavelengths to a single cavity. While the noise processes for single wavelength cavities are well known, the correlation caused by multi-stack coatings has as yet not been analysed experimentally. In our work, we stabilise the frequency of a $729\,$nm and a $1069\,$nm laser to one mirror pair and determine the residual-amplitude modulation (RAM) and photo-thermal noise (PTN). We find correlations in PTN between the two lasers and observe coherent cancellation of PTN for the $1069\,$nm coating. We show that the fractional frequency instability of the $729\,$nm laser is limited by RAM at $1\times10^{-14}$. The instability of the $1069\,$nm laser is at $3\times10^{-15}$ close to the thermal noise limit of $1.5\times10^{-15}$. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Comments: 17 pages, 5 figures

38.7 GHz Thin Film Lithium Niobate Acoustic Filter

Authors: Omar Barrera, Sinwoo Cho, Jack Kramer, Vakhtang Chulukhadze, Joshua Campbell, Ruochen Lu

Abstract: In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology. The filter achieves operating frequency up to 5G millimeter wave (mmWave) frequency range 2 (FR2) bands, by thinning thin-film LiNbO3 resonators to sub-50 nm t… ▽ More In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology. The filter achieves operating frequency up to 5G millimeter wave (mmWave) frequency range 2 (FR2) bands, by thinning thin-film LiNbO3 resonators to sub-50 nm thickness. The high electromechanical coupling (k2) and quality factor (Q) of first-order antisymmetric (A1) mode resonators in 128 Y-cut lithium niobate (LiNbO3) collectively enable the first acoustic filters at mmWave. The key design consideration of electromagnetic (EM) resonances in interdigitated transducers (IDT) is addressed and mitigated. These results indicate that thin-film piezoelectric resonators could be pushed to 5G FR2 bands. Further performance enhancement and frequency scaling calls for better resonator technologies and EM-acoustic filter co-design. △ Less

Submitted 9 November, 2023; originally announced November 2023.

Comments: 4 pages, 6 figures, accepted by IEEE MTT-S International Microwave Filter Workshop (IMFW) 2024

The Repeating Flaring Activity of Blazar AO 0235+164

Authors: Juan Escudero Pedrosa, Iván Agudo, Andrea Tramacere, Alan P. Marscher, Svetlana Jorstad, Z. R. Weaver, Carolina Casadio, Clemens Thum, Ioannis Myserlis, Antonio Fuentes, Efthalia Traianou, Jae-Young Kim, Joana Kramer, Rubén López-Coto, Filippo D'Ammando, M. Bernardos, Giacomo Bonnoli, Dmitriy A. Blinov, G. A. Borman, T. S. Grishina, V. A. Hagen-Thorn, E. N. Kopatskaya, E. G. Larionova, V. M. Larionov, L. V. Larionova , et al. (5 additional authors not shown)

Abstract: Context. Blazar AO 0235+164, located at redshift z = 0.94, has undergone several sharp multi-spectral-range flaring episodes during the last decades. In particular, the episodes peaking in 2008 and 2015, that received extensive multi-wavelength coverage, exhibited interesting behavior. Aims. We study the actual origin of these two observed flares by constraining the properties of the observed ph… ▽ More Context. Blazar AO 0235+164, located at redshift z = 0.94, has undergone several sharp multi-spectral-range flaring episodes during the last decades. In particular, the episodes peaking in 2008 and 2015, that received extensive multi-wavelength coverage, exhibited interesting behavior. Aims. We study the actual origin of these two observed flares by constraining the properties of the observed photo-polarimetric variability, those of the broad-band spectral energy-distribution and the observed time-evolution behavior of the source as seen by ultra-high resolution total-flux and polarimetric Very-long-baseline interferometry (VLBI) imaging. Methods. The analysis of VLBI images allows us to constrain kinematic and geometrical parameters of the 7 mm jet. We use the Discrete Correlation Function to compute the statistical correlation and the delays between emission at different spectral ranges. Multi-epoch modeling of the spectral energy distributions allows us to propose specific models of emission; in particular for the unusual spectral features observed in this source in the X-ray region of the spectrum during strong multi spectral-range flares. Results. We find that these X-ray spectral features can be explained by an emission component originating in a separate particle distribution than the one responsible for the two standard blazar bumps. This is in agreement with the results of our correlation analysis that do not find a strong correlation between the X-rays and the remaining spectral ranges. We find that both external Compton dominated and synchrotron self-Compton dominated models can explain the observed spectral energy distributions. However, synchrotron self-Compton models are strongly favored by the delays and geometrical parameters inferred from the observations. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Observations of Low and Intermediate Spectral Peak Blazars with the Imaging X-ray Polarimetry Explorer

Authors: Herman L. Marshall, Ioannis Liodakis, Alan P. Marscher, Niccolo Di Lalla, Svetlana G. Jorstad, Dawoon E. Kim, Riccardo Middei, Michela Negro, Nicola Omodei, Abel L. Peirson, Matteo Perri, Simonetta Puccetti, Ivan Agudo, Giacomo Bonnoli, Andrei V. Berdyugin, Elisabetta Cavazzuti, Nicole Rodriguez Cavero, Immacolata Donnarumma, Laura Di Gesu, Jenni Jormanainen, Henric Krawczynski, Elina Lindfors, Frederic Marin, Francesco Massaro, Luigi Pacciani , et al. (133 additional authors not shown)

Abstract: We present X-ray polarimetry observations from the Imaging X-ray Polarimetry Explorer (IXPE) of three low spectral peak and one intermediate spectral peak blazars, namely 3C 273, 3C 279, 3C 454.3, and S5 0716+714. For none of these objects was IXPE able to detect X-ray polarization at the 3$σ$ level. However, we placed upper limits on the polarization degree at $\sim$10-30\%. The undetected polari… ▽ More We present X-ray polarimetry observations from the Imaging X-ray Polarimetry Explorer (IXPE) of three low spectral peak and one intermediate spectral peak blazars, namely 3C 273, 3C 279, 3C 454.3, and S5 0716+714. For none of these objects was IXPE able to detect X-ray polarization at the 3$σ$ level. However, we placed upper limits on the polarization degree at $\sim$10-30\%. The undetected polarizations favor models where the X-ray band is dominated by unpolarized photons upscattered by relativistic electrons in the jets of blazars, although hadronic models are not completely eliminated. We discuss the X-ray polarization upper limits in the context of our contemporaneous multiwavelength polarization campaigns. △ Less

Submitted 19 October, 2023; v1 submitted 17 October, 2023; originally announced October 2023.

Comments: 19 pages, 10 figures, 6 tables; submitted to the Astrophysical Journal

Uniform sup-norm bounds on average for Siegel cusp forms

Authors: Jürg Kramer, Antareep Mandal

Abstract: Let $Γ\subsetneq \mathrm{Sp}_n(\mathbb{R})$ be an arithmetic subgroup of the symplectic group $\mathrm{Sp}_n(\mathbb{R})$ acting on the Siegel upper half-space $\mathbb{H}_n$ of degree $n$. Consider the $d$-dimensional space of Siegel cusp forms $\mathcal{S}_κ^n(Γ)$ of weight $κ$ for $Γ$ and let $\{f_j\}_{1\leq j\leq d}$ be a basis of $\mathcal{S}_κ^n(Γ)$ orthonormal with respect to the Petersson… ▽ More Let $Γ\subsetneq \mathrm{Sp}_n(\mathbb{R})$ be an arithmetic subgroup of the symplectic group $\mathrm{Sp}_n(\mathbb{R})$ acting on the Siegel upper half-space $\mathbb{H}_n$ of degree $n$. Consider the $d$-dimensional space of Siegel cusp forms $\mathcal{S}_κ^n(Γ)$ of weight $κ$ for $Γ$ and let $\{f_j\}_{1\leq j\leq d}$ be a basis of $\mathcal{S}_κ^n(Γ)$ orthonormal with respect to the Petersson inner product. In this paper we show using the heat kernel method that the sup-norm of the quantity $S_κ^Γ(Z):=\sum_{j=1}^{d}\det (Y)^κ\vert{f_j(Z)}\vert^2\,(Z\in\mathbb{H}_n)$ is bounded above by $c_{n,Γ} κ^{n(n+1)/2}$ when $M:=Γ\backslash\mathbb{H}_n$ is compact and by $c_{n,Γ} κ^{3n(n+1)/4}$ when $M$ is non-compact of finite volume, where $c_{n,Γ}$ denotes a positive real constant depending only on the degree $n$ and the group $Γ$. Furthermore, we show that this bound is uniform in the sense that if we fix a group $Γ_0$ and take $Γ$ to be a subgroup of $Γ_0$ of finite index, then the constant $c_{n,Γ}$ in these bounds depends only on the degree $n$ and the fixed group $Γ_0$. △ Less

Submitted 8 October, 2023; originally announced October 2023.

MSC Class: 11F46

Mechanically-driven Stem Cell Separation in Tissues caused by Proliferating Daughter Cells

Authors: Johannes C. Krämer, Edouard Hannezo, Gerhard Gompper, Jens Elgeti

Abstract: The homeostasis of epithelial tissue relies on a balance between the self-renewal of stem cell populations, cellular differentiation, and loss. Although this balance needs to be tightly regulated to avoid pathologies, such as tumor growth, the regulatory mechanisms, both cell-intrinsic and collective, which ensure tissue steady-state are still poorly understood. Here, we develop a computational mo… ▽ More The homeostasis of epithelial tissue relies on a balance between the self-renewal of stem cell populations, cellular differentiation, and loss. Although this balance needs to be tightly regulated to avoid pathologies, such as tumor growth, the regulatory mechanisms, both cell-intrinsic and collective, which ensure tissue steady-state are still poorly understood. Here, we develop a computational model that incorporates basic assumptions of stem cell renewal into distinct populations and mechanical interactions between cells. We find that the model generates unexpected dynamic features: stem cells repel each other in the bulk tissue and are thus found rather isolated, as in a number of in vivo contexts. By mapping the system onto a gas of passive Brownian particles with effective repulsive interactions, that arise from the generated flows of differentiated cells, we show that we can quantitatively describe such stem cell distribution in tissues. The interaction potential between a pair of stem cells decays exponentially with a characteristic length that spans several cell sizes, corresponding to the volume of cells generated per stem cell division. Our findings may help understanding the dynamics of normal and cancerous epithelial tissues. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Journal ref: SciPost Phys. 16, 097 (2024)

Using deep learning to construct stochastic local search SAT solvers with performance bounds

Authors: Maximilian Kramer, Paul Boes

Abstract: The Boolean Satisfiability problem (SAT) is the most prototypical NP-complete problem and of great practical relevance. One important class of solvers for this problem are stochastic local search (SLS) algorithms that iteratively and randomly update a candidate assignment. Recent breakthrough results in theoretical computer science have established sufficient conditions under which SLS solvers are… ▽ More The Boolean Satisfiability problem (SAT) is the most prototypical NP-complete problem and of great practical relevance. One important class of solvers for this problem are stochastic local search (SLS) algorithms that iteratively and randomly update a candidate assignment. Recent breakthrough results in theoretical computer science have established sufficient conditions under which SLS solvers are guaranteed to efficiently solve a SAT instance, provided they have access to suitable "oracles" that provide samples from an instance-specific distribution, exploiting an instance's local structure. Motivated by these results and the well established ability of neural networks to learn common structure in large datasets, in this work, we train oracles using Graph Neural Networks and evaluate them on two SLS solvers on random SAT instances of varying difficulty. We find that access to GNN-based oracles significantly boosts the performance of both solvers, allowing them, on average, to solve 17% more difficult instances (as measured by the ratio between clauses and variables), and to do so in 35% fewer steps, with improvements in the median number of steps of up to a factor of 8. As such, this work bridges formal results from theoretical computer science and practically motivated research on deep learning for constraint satisfaction problems and establishes the promise of purpose-trained SAT solvers with performance guarantees. △ Less

Submitted 23 September, 2023; v1 submitted 20 September, 2023; originally announced September 2023.

Comments: 15 pages, 9 figures, code available at https://github.com/porscheofficial/sls_sat_solving_with_deep_learning

Fundamental Antisymmetric Mode Acoustic Resonator in Periodically Poled Piezoelectric Film Lithium Niobate

Authors: Omar Barrera, Jack Kramer, Ryan Tetro, Sinwoo Cho, Vakhtang Chulukhadze, Luca Colombo, Ruochen Lu

Abstract: Radio frequency (RF) acoustic resonators have long been used for signal processing and sensing. Devices that integrate acoustic resonators benefit from their slow phase velocity (vp), in the order of 3 to 10 km/s, which allows miniaturization of the device. Regarding the subject of small form factor, acoustic resonators that operate at the so-called fundamental antisymmetric mode (A0), feature eve… ▽ More Radio frequency (RF) acoustic resonators have long been used for signal processing and sensing. Devices that integrate acoustic resonators benefit from their slow phase velocity (vp), in the order of 3 to 10 km/s, which allows miniaturization of the device. Regarding the subject of small form factor, acoustic resonators that operate at the so-called fundamental antisymmetric mode (A0), feature even slower vp (1 to 3 km/s), which allows for smaller devices. This work reports the design and fabrication of A0 mode resonators leveraging the advantages of periodically poled piezoelectricity (P3F) lithium niobate, which includes a pair of piezoelectric layers with opposite polarizations to mitigate the charge cancellation arising from opposite stress of A0 in the top and bottom piezoelectric layers. The fabricated device shows a quality factor (Q) of 800 and an electromechanical coupling (k2) of 3.29, resulting in a high figure of merit (FoM, Q times k2) of 26.3 at the resonant frequency of 294 MHz, demonstrating the first efficient A0 device in P3F platforms. The proposed A0 platform could enable miniature signal processing, sensing, and ultrasound transducer applications upon optimization. △ Less

Submitted 27 August, 2023; originally announced September 2023.

Comments: 4 pages, 6 figures, accepted by IEEE IUS 2023

Millimeter Wave Thin-Film Bulk Acoustic Resonator in Sputtered Scandium Aluminum Nitride

Authors: Sinwoo Cho, Omar Barrera, Pietro Simeoni, Emily N. Marshall, Jack Kramer, Keisuke Motoki, Tzu-Hsuan Hsu, Vakhtang Chulukhadze, Matteo Rinaldi, W. Alan Doolittle, Ruochen Lu

Abstract: This work reports a millimeter wave (mmWave) thin-film bulk acoustic resonator (FBAR) in sputtered scandium aluminum nitride (ScAlN). This paper identifies challenges of frequency scaling sputtered ScAlN into mmWave and proposes a stack and new fabrication procedure with a sputtered Sc0.3Al0.7N on Al on Si carrier wafer. The resonator achieves electromechanical coupling (k2) of 7.0% and quality fa… ▽ More This work reports a millimeter wave (mmWave) thin-film bulk acoustic resonator (FBAR) in sputtered scandium aluminum nitride (ScAlN). This paper identifies challenges of frequency scaling sputtered ScAlN into mmWave and proposes a stack and new fabrication procedure with a sputtered Sc0.3Al0.7N on Al on Si carrier wafer. The resonator achieves electromechanical coupling (k2) of 7.0% and quality factor (Q) of 62 for the first-order symmetric (S1) mode at 21.4 GHz, along with k2 of 4.0% and Q of 19 for the third-order symmetric (S3) mode at 55.4 GHz, showing higher figures of merit (FoM, k2xQ) than reported AlN/ScAlN-based mmWave acoustic resonators. The ScAlN quality is identified by transmission electron microscopy (TEM) and X-ray diffraction (XRD), identifying the bottlenecks in the existing piezoelectric-metal stack. Further improvement of ScAlN/AlN-based mmWave acoustic resonators calls for better crystalline quality from improved thin-film deposition methods. △ Less

Submitted 6 September, 2023; originally announced September 2023.

Comments: 3 pages, 7 figures, submitted to JMEMS

Thin-Film Lithium Niobate Acoustic Resonator with High Q of 237 and k2 of 5.1% at 50.74 GHz

Authors: Jack Kramer, Vakhtang Chulukhadze, Kenny Huynh, Omar Barrera, Michael Liao, Sinwoo Cho, Lezli Matto, Mark S. Goorsky, Ruochen Lu

Abstract: This work reports a 50.74 GHz lithium niobate (LiNbO3) acoustic resonator with a high quality factor (Q) of 237 and an electromechanical coupling (k2) of 5.17% resulting in a figure of merit (FoM, Q x k2) of 12.2. The LiNbO3 resonator employs a novel bilayer periodically poled piezoelectric film (P3F) 128 Y-cut LiNbO3 on amorphous silicon (a-Si) on sapphire stack to achieve low losses and high cou… ▽ More This work reports a 50.74 GHz lithium niobate (LiNbO3) acoustic resonator with a high quality factor (Q) of 237 and an electromechanical coupling (k2) of 5.17% resulting in a figure of merit (FoM, Q x k2) of 12.2. The LiNbO3 resonator employs a novel bilayer periodically poled piezoelectric film (P3F) 128 Y-cut LiNbO3 on amorphous silicon (a-Si) on sapphire stack to achieve low losses and high coupling at millimeter wave (mm-wave). The device also shows a Q of 159, k2 of 65.06%, and FoM of 103.4 for the 16.99 GHz tone. This result shows promising prospects of P3F LiNbO3 towards mm-wave front-end filters. △ Less

Submitted 11 July, 2023; originally announced July 2023.

Comments: 4 pages, 5 figures, published in 2023 Joint Conference of the IEEE International Frequency Control Symposium & European Frequency and Time Forum (IEEE IFCS 2023)

Journal ref: 2023 Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS), Toyama, Japan, 2023