-
Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture
Authors:
Christian Križan,
Janka Biznárová,
Liangyu Chen,
Emil Hogedal,
Amr Osman,
Christopher W. Warren,
Sandoko Kosen,
Hang-Xi Li,
Tahereh Abad,
Anuj Aggarwal,
Marco Caputo,
Jorge Fernández-Pendás,
Akshay Gaikwad,
Leif Grönberg,
Andreas Nylander,
Robert Rehammar,
Marcus Rommel,
Olga I. Yuzephovich,
Anton Frisk Kockum,
Joonas Govenius,
Giovanna Tancredi,
Jonas Bylander
Abstract:
It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during co…
▽ More
It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during compilation as any two-qubit Clifford gate can be executed using at most one two-qubit gate from this set, plus additional single-qubit gates. We experimentally demonstrate that a SWAP gate can be decomposed into one iSWAP gate followed by one CZ gate, affirming a more efficient compilation strategy over the conventional approach that relies on three iSWAP or three CZ gates to replace a SWAP gate. Our implementation makes use of a superconducting quantum processor design based on fixed-frequency transmon qubits coupled together by a parametrically modulated tunable transmon coupler, extending this platform's native gate set so that any two-qubit Clifford unitary matrix can be realized using no more than two two-qubit gates and single-qubit gates.
△ Less
Submitted 19 December, 2024;
originally announced December 2024.
-
Fast unconditional reset and leakage reduction in fixed-frequency transmon qubits
Authors:
Liangyu Chen,
Simon Pettersson Fors,
Zixian Yan,
Anaida Ali,
Tahereh Abad,
Amr Osman,
Eleftherios Moschandreou,
Benjamin Lienhard,
Sandoko Kosen,
Hang-Xi Li,
Daryoush Shiri,
Tong Liu,
Stefan Hill,
Abdullah-Al Amin,
Robert Rehammar,
Mamta Dahiya,
Andreas Nylander,
Marcus Rommel,
Anita Fadavi Roudsari,
Marco Caputo,
Grönberg Leif,
Joonas Govenius,
Miroslav Dobsicek,
Michele Faucci Giannelli,
Anton Frisk Kockum
, et al. (2 additional authors not shown)
Abstract:
The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable. We demonstrate such a protocol in an architecture consisting of fixed-frequency transmon qubits pa…
▽ More
The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable. We demonstrate such a protocol in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers -- an architecture that is compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum computers.
△ Less
Submitted 7 October, 2024; v1 submitted 25 September, 2024;
originally announced September 2024.
-
Signal crosstalk in a flip-chip quantum processor
Authors:
Sandoko Kosen,
Hang-Xi Li,
Marcus Rommel,
Robert Rehammar,
Marco Caputo,
Leif Grönberg,
Jorge Fernández-Pendás,
Anton Frisk Kockum,
Janka Biznárová,
Liangyu Chen,
Christian Križan,
Andreas Nylander,
Amr Osman,
Anita Fadavi Roudsari,
Daryoush Shiri,
Giovanna Tancredi,
Joonas Govenius,
Jonas Bylander
Abstract:
Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk…
▽ More
Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors.
△ Less
Submitted 12 September, 2024; v1 submitted 1 March, 2024;
originally announced March 2024.
-
Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures
Authors:
Hang-Xi Li,
Daryoush Shiri,
Sandoko Kosen,
Marcus Rommel,
Lert Chayanun,
Andreas Nylander,
Robert Rehammar,
Giovanna Tancredi,
Marco Caputo,
Kestutis Grigoras,
Leif Grönberg,
Joonas Govenius,
Jonas Bylander
Abstract:
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to p…
▽ More
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing.
△ Less
Submitted 30 August, 2023; v1 submitted 9 May, 2023;
originally announced May 2023.
-
Mitigation of frequency collisions in superconducting quantum processors
Authors:
Amr Osman,
Jorge Fernàndez-Pendàs,
Christopher Warren,
Sandoko Kosen,
Marco Scigliuzzo,
Anton Frisk Kockum,
Giovanna Tancredi,
Anita Fadavi Roudsari,
Jonas Bylander
Abstract:
The reproducibility of qubit parameters is a challenge for scaling up superconducting quantum processors. Signal crosstalk imposes constraints on the frequency separation between neighboring qubits. The frequency uncertainty of transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction area, tunnel barrier thickness, and the qubit capacitor. We decre…
▽ More
The reproducibility of qubit parameters is a challenge for scaling up superconducting quantum processors. Signal crosstalk imposes constraints on the frequency separation between neighboring qubits. The frequency uncertainty of transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction area, tunnel barrier thickness, and the qubit capacitor. We decrease the sensitivity to these variations by fabricating larger Josephson junctions and reduce the wafer-level standard deviation in resistance down to 2%. We characterize 32 identical transmon qubits and demonstrate the reproducibility of the qubit frequencies with a 40 MHz standard deviation (i.e. 1%) with qubit quality factors exceeding 2 million. We perform two-level-system (TLS) spectroscopy and observe no significant increase in the number of TLSs causing qubit relaxation. We further show by simulation that for our parametric-gate architecture, and accounting only for errors caused by the uncertainty of the qubit frequency, we can scale up to 100 qubits with an average of only 3 collisions between quantum-gate transition frequencies, assuming 2% crosstalk and 99.9% target gate fidelity.
△ Less
Submitted 10 March, 2023; v1 submitted 8 March, 2023;
originally announced March 2023.
-
Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier
Authors:
Liangyu Chen,
Hang-Xi Li,
Yong Lu,
Christopher W. Warren,
Christian J. Križan,
Sandoko Kosen,
Marcus Rommel,
Shahnawaz Ahmed,
Amr Osman,
Janka Biznárová,
Anita Fadavi Roudsari,
Benjamin Lienhard,
Marco Caputo,
Kestutis Grigoras,
Leif Grönberg,
Joonas Govenius,
Anton Frisk Kockum,
Per Delsing,
Jonas Bylander,
Giovanna Tancredi
Abstract:
High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to di…
▽ More
High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to distinguish among qubit populations in higher energy levels. Using a machine-learning algorithm to post-process the two-tone measurement results further improves the qubit-state assignment fidelity. We perform single-shot frequency-multiplexed qubit readout, with a 140ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Qubit-compatible substrates with superconducting through-silicon vias
Authors:
K. Grigoras,
N. Yurttagül,
J. -P. Kaikkonen,
E. T. Mannila,
P. Eskelinen,
D. P. Lozano,
H. -X. Li,
M. Rommel,
D. Shiri,
N. Tiencken,
S. Simbierowicz,
A. Ronzani,
J. Hätinen,
D. Datta,
V. Vesterinen,
L. Grönberg,
J. Biznárová,
A. Fadavi Roudsari,
S. Kosen,
A. Osman,
M. Prunnila,
J. Hassel,
J. Bylander,
J. Govenius
Abstract:
We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the ar…
▽ More
We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration.
△ Less
Submitted 8 November, 2022; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Building Blocks of a Flip-Chip Integrated Superconducting Quantum Processor
Authors:
Sandoko Kosen,
Hang-Xi Li,
Marcus Rommel,
Daryoush Shiri,
Christopher Warren,
Leif Grönberg,
Jaakko Salonen,
Tahereh Abad,
Janka Biznárová,
Marco Caputo,
Liangyu Chen,
Kestutis Grigoras,
Göran Johansson,
Anton Frisk Kockum,
Christian Križan,
Daniel Pérez Lozano,
Graham Norris,
Amr Osman,
Jorge Fernández-Pendás,
Alberto Ronzani,
Anita Fadavi Roudsari,
Slawomir Simbierowicz,
Giovanna Tancredi,
Andreas Wallraff,
Christopher Eichler
, et al. (2 additional authors not shown)
Abstract:
We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods…
▽ More
We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods and discuss the sensitivity of device parameters to variation in interchip spacing. Notably, the additional flip-chip fabrication steps do not degrade the qubit performance compared to our baseline state-of-the-art in single-chip, planar circuits. This integration technique can be extended to the realisation of quantum processors accommodating hundreds of qubits in one module as it offers adequate input/output wiring access to all qubits and couplers.
△ Less
Submitted 14 June, 2022; v1 submitted 5 December, 2021;
originally announced December 2021.
-
Simplified Josephson-junction fabrication process for reproducibly high-performance superconducting qubits
Authors:
A. Osman,
J. Simon,
A. Bengtsson,
S. Kosen,
P. Krantz,
D. Perez,
M. Scigliuzzo,
Jonas Bylander,
A. Fadavi Roudsari
Abstract:
We introduce a simplified fabrication technique for Josephson junctions and demonstrate superconducting Xmon qubits with $T_1$ relaxation times averaging above 50$~μ$s ($Q>$1.5$\times$ 10$^6$). Current shadow-evaporation techniques for aluminum-based Josephson junctions require a separate lithography step to deposit a patch that makes a galvanic, superconducting connection between the junction ele…
▽ More
We introduce a simplified fabrication technique for Josephson junctions and demonstrate superconducting Xmon qubits with $T_1$ relaxation times averaging above 50$~μ$s ($Q>$1.5$\times$ 10$^6$). Current shadow-evaporation techniques for aluminum-based Josephson junctions require a separate lithography step to deposit a patch that makes a galvanic, superconducting connection between the junction electrodes and the circuit wiring layer. The patch connection eliminates parasitic junctions, which otherwise contribute significantly to dielectric loss. In our patch-integrated cross-type (PICT) junction technique, we use one lithography step and one vacuum cycle to evaporate both the junction electrodes and the patch. In a study of more than 3600 junctions, we show an average resistance variation of 3.7$\%$ on a wafer that contains forty 0.5$\times$0.5-cm$^2$ chips, with junction areas ranging between 0.01 and 0.16 $μ$m$^2$. The average on-chip spread in resistance is 2.7$\%$, with 20 chips varying between 1.4 and 2$\%$. For the junction sizes used for transmon qubits, we deduce a wafer-level transition-frequency variation of 1.7-2.5$\%$. We show that 60-70$\%$ of this variation is attributed to junction-area fluctuations, while the rest is caused by tunnel-junction inhomogeneity. Such high frequency predictability is a requirement for scaling-up the number of qubits in a quantum computer.
△ Less
Submitted 10 November, 2020;
originally announced November 2020.
-
Microwave magnon damping in YIG films at millikelvin temperatures
Authors:
Sandoko Kosen,
Arjan F. van Loo,
Dmytro A. Bozhko,
Laura Mihalceanu,
Alexy D. Karenowska
Abstract:
Magnon systems used in quantum devices require low damping if coherence is to be maintained. The ferrimagnetic electrical insulator yttrium iron garnet (YIG) has low magnon damping at room temperature and is a strong candidate to host microwave magnon excitations in future quantum devices. Monocrystalline YIG films are typically grown on gadolinium gallium garnet (GGG) substrates. In this work, co…
▽ More
Magnon systems used in quantum devices require low damping if coherence is to be maintained. The ferrimagnetic electrical insulator yttrium iron garnet (YIG) has low magnon damping at room temperature and is a strong candidate to host microwave magnon excitations in future quantum devices. Monocrystalline YIG films are typically grown on gadolinium gallium garnet (GGG) substrates. In this work, comparative experiments made on YIG waveguides with and without GGG substrates indicate that the material plays a significant role in increasing the damping at low temperatures. Measurements reveal that damping due to temperature-peak processes is dominant above 1 K. Damping behaviour that we show can be attributed to coupling to two-level fluctuators (TLFs) is observed below 1 K. Upon saturating the TLFs in the substrate-free YIG at 20 mK, linewidths of 1.4 MHz are achievable: lower than those measured at room temperature.
△ Less
Submitted 24 October, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Measurement of a Magnonic Crystal at Millikelvin Temperatures
Authors:
S. Kosen,
R. G. E. Morris,
A. F. van Loo,
A. D. Karenowska
Abstract:
Hybrid systems combining magnons and superconducting quantum circuits have attracted increasing interest in recent years. Magnonic crystals (MCs) are one of the building blocks of room-temperature magnonics and can be used to create devices with an engineered band structure. These devices, exhibiting tunable frequency selectivity and the ability to store travelling excitations in the microwave reg…
▽ More
Hybrid systems combining magnons and superconducting quantum circuits have attracted increasing interest in recent years. Magnonic crystals (MCs) are one of the building blocks of room-temperature magnonics and can be used to create devices with an engineered band structure. These devices, exhibiting tunable frequency selectivity and the ability to store travelling excitations in the microwave regime, may form the basis of a set of new tools to be used in the context of quantum information processing. In order to ascertain the feasibility of such plans, MCs must be demonstrated to work at the low temperatures required for microwave-frequency quantum experiments. We report the first measurements of the transmission of microwave signals through an MC at 20 mK and observe a magnonic bandgap in both continuous-wave and pulsed excitation experiments. The spin-wave damping at low temperatures in our yttrium iron garnet MC is higher than expected, indicating that further work is necessary before the full potential of quantum experiments using magnonic crystals can be realised.
△ Less
Submitted 28 February, 2019; v1 submitted 2 November, 2017;
originally announced November 2017.
-
Strong coupling of magnons in a YIG sphere to photons in a planar superconducting resonator in the quantum limit
Authors:
R. G. E. Morris,
A. F. van Loo,
S. Kosen,
A. D. Karenowska
Abstract:
We report measurements of a superconducting coplanar waveguide resonator (CPWR) coupled to a sphere of yttrium-iron garnet. The non-uniform CPWR field allows us to excite various magnon modes in the sphere. Mode frequencies and relative coupling strengths are consistent with theory. Strong coupling is observed to several modes even with, on average, less than one excitation present in the CPWR. Th…
▽ More
We report measurements of a superconducting coplanar waveguide resonator (CPWR) coupled to a sphere of yttrium-iron garnet. The non-uniform CPWR field allows us to excite various magnon modes in the sphere. Mode frequencies and relative coupling strengths are consistent with theory. Strong coupling is observed to several modes even with, on average, less than one excitation present in the CPWR. The time response to square pulses shows oscillations at the mode splitting frequency. These results indicate the feasibility of combining magnonic and planar superconducting quantum devices.
△ Less
Submitted 14 September, 2017; v1 submitted 31 October, 2016;
originally announced October 2016.
-
Large Fizeau's light-dragging effect in a moving electromagnetically induced transparent medium
Authors:
Pei-Chen Kuan,
Chang Huang,
Wei Sheng Chan,
Sandoko Kosen,
Shau-Yu Lan
Abstract:
As one of the most influential experiments on the development of modern macroscopic theory from Newtonian mechanics to Einstein's special theory of relativity, the phenomenon of light dragging in a moving medium has been discussed and observed extensively in different types of systems. To have a significant dragging effect, the long duration of light travelling in the medium is preferred. Here we…
▽ More
As one of the most influential experiments on the development of modern macroscopic theory from Newtonian mechanics to Einstein's special theory of relativity, the phenomenon of light dragging in a moving medium has been discussed and observed extensively in different types of systems. To have a significant dragging effect, the long duration of light travelling in the medium is preferred. Here we demonstrate a light-dragging experiment in an electromagnetically induced transparent cold atomic ensemble and enhance the dragging effect by at least three orders of magnitude compared with the previous experiments. With a large enhancement of the dragging effect, we realize an atom-based velocimeter that has a sensitivity two orders of magnitude higher than the velocity width of the atomic medium used. Such a demonstration could pave the way for motional sensing using the collective state of atoms in a room temperature vapour cell or solid state material.
△ Less
Submitted 11 October, 2016;
originally announced October 2016.
-
Competition between electric field and magnetic field noise in the decoherence of a single spin in diamond
Authors:
P. Jamonneau,
M. Lesik,
J. P. Tetienne,
I. Alvizu,
L. Mayer,
A. Dréau,
S. Kosen,
J. -F. Roch,
S. Pezzagna,
J. Meijer,
T. Teraji,
Y. Kubo,
P. Bertet,
J. R. Maze,
V. Jacques
Abstract:
We analyze the impact of electric field and magnetic field fluctuations in the decoherence of the electronic spin associated with a single nitrogen-vacancy (NV) defect in diamond by engineering spin eigenstates protected either against magnetic noise or against electric noise. The competition between these noise sources is analyzed quantitatively by changing their relative strength through modific…
▽ More
We analyze the impact of electric field and magnetic field fluctuations in the decoherence of the electronic spin associated with a single nitrogen-vacancy (NV) defect in diamond by engineering spin eigenstates protected either against magnetic noise or against electric noise. The competition between these noise sources is analyzed quantitatively by changing their relative strength through modifications of the environment. This study provides significant insights into the decoherence of the NV electronic spin, which is valuable for quantum metrology and sensing applications.
△ Less
Submitted 25 November, 2015;
originally announced November 2015.
-
Hong-Ou-Mandel interference between triggered and heralded single photons from separate atomic systems
Authors:
Victor Leong,
Sandoko Kosen,
Bharath Srivathsan,
Gurpreet Kaur Gulati,
Alessandro Ceré,
Christian Kurtsiefer
Abstract:
We present Hong-Ou-Mandel interference of single photons generated via two different physical processes by two independent atomic systems: scattering by a single atom, and parametric generation via four-wave mixing in a cloud of cold atoms. Without any spectral filtering, we observe a visibility of V=62$\pm$4%. After correcting for accidental coincidences, we obtain V=93$\pm$6%. The observed inter…
▽ More
We present Hong-Ou-Mandel interference of single photons generated via two different physical processes by two independent atomic systems: scattering by a single atom, and parametric generation via four-wave mixing in a cloud of cold atoms. Without any spectral filtering, we observe a visibility of V=62$\pm$4%. After correcting for accidental coincidences, we obtain V=93$\pm$6%. The observed interference demonstrates the compatibility of the two sources, forming the basis for an efficient quantum interface between different physical systems.
△ Less
Submitted 3 April, 2015;
originally announced April 2015.
-
Probing the dynamics of a nuclear spin bath in diamond through time-resolved central spin magnetometry
Authors:
A. Dréau,
P. Jamonneau,
O. Gazzano,
S. Kosen,
J. -F. Roch,
J. R. Maze,
V. Jacques
Abstract:
Using fast electron spin resonance spectroscopy of a single nitrogen-vacancy defect in diamond, we demonstrate real-time readout of the Overhauser field produced by its nuclear spin environment under ambient conditions. These measurements enable narrowing the Overhauser field distribution by post-selection, corresponding to a conditional preparation of the nuclear spin bath. Correlations of the Ov…
▽ More
Using fast electron spin resonance spectroscopy of a single nitrogen-vacancy defect in diamond, we demonstrate real-time readout of the Overhauser field produced by its nuclear spin environment under ambient conditions. These measurements enable narrowing the Overhauser field distribution by post-selection, corresponding to a conditional preparation of the nuclear spin bath. Correlations of the Overhauser field fluctuations are quantitatively inferred by analysing the Allan deviation over consecutive measurements. This method allows to extract the dynamics of weakly coupled nuclear spins of the reservoir.
△ Less
Submitted 29 September, 2014; v1 submitted 19 June, 2014;
originally announced June 2014.
