-
Bayesian Model Averaging (BMA) for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
G. Schnabel,
A. J. Koning
Abstract:
To ensure agreement between theoretical calculations and experimental data, parameters to selected nuclear physics models, are perturbed, and fine-tuned in nuclear data evaluations. This approach assumes that the chosen set of models accurately represents the `true' distribution. Furthermore, the models are chosen globally, indicating their applicability across the entire energy range of interest.…
▽ More
To ensure agreement between theoretical calculations and experimental data, parameters to selected nuclear physics models, are perturbed, and fine-tuned in nuclear data evaluations. This approach assumes that the chosen set of models accurately represents the `true' distribution. Furthermore, the models are chosen globally, indicating their applicability across the entire energy range of interest. However, this approach overlooks uncertainties inherent in the models themselves. As a result, achieving satisfactory fits to experimental data within certain energy regions for specific channels becomes challenging, as the evaluation is constrained by the deficiencies of the selected models. In this work, we propose that instead of selecting globally a winning model set and proceeding with it as if it was the `true' model set, we instead, take a weighted average over multiple models within a BMA framework, each weighted by its posterior probability. The method involves executing a set of TALYS calculations by randomly varying multiple nuclear physics models and their parameters to yield a vector of calculated observables. Next, the likelihood function was computed at each considered incident energy point for selected cross sections by comparing the vector of calculated observables with that of the selected differential experimental data. As the cross sections and elastic angular distributions were updated locally on a per-energy-point basis, the approach typically results in discontinuities or "kinks" in the curves, and these were addressed using spline interpolation. The proposed BMA method was applied to the evaluation of proton induced reactions on $^{58}$Ni within 1 - 100 MeV. The results demonstrate favorable comparisons with experimental data, as well as with the TENDL-2021 evaluation.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
FENDL: A library for fusion research and applications
Authors:
G. Schnabel,
D. L. Aldama,
T. Bohm,
U. Fischer,
S. Kunieda,
A. Trkov,
C. Konno,
R. Capote,
A. J. Koning,
S. Breidokaite,
T. Eade,
M. Fabbri,
D. Flammini,
L. Isolan,
I. Kodeli,
M. Košťál,
S. Kwon,
D. Laghi,
D. Leichtle,
S. Nakayama,
M. Ohta,
L. W. Packer,
Y. Qiu,
S. Sato,
M. Sawan
, et al. (6 additional authors not shown)
Abstract:
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for i…
▽ More
The Fusion Evaluated Nuclear Data Library (FENDL) is a comprehensive and validated collection of nuclear cross section data coordinated by the International Atomic Energy Agency (IAEA) Nuclear Data Section (NDS). FENDL assembles the best nuclear data for fusion applications selected from available nuclear data libraries and has been under development for decades. FENDL contains sub-libraries for incident neutron, proton, and deuteron cross sections including general purpose and activation files used for particle transport and nuclide inventory calculations.
We describe the history, selection of evaluations for the various sub-libraries (neutron, proton, deuteron) with the focus on transport and reactor dosimetry applications, the processing of the nuclear data for application codes, and the development of the TENDL-2017 library which is the currently recommended activation library for FENDL. We briefly describe the IAEA IRDFF library as the recommended library for dosimetry fusion applications. We also present work on validation of the neutron sub-library using a variety of fusion relevant computational and experimental benchmarks. A variety of cross section libraries are used for the validation work including FENDL-2.1, FENDL-3.1d, FENDL-3.2, ENDF/B-VIII.0, and JEFF-3.2 with the emphasis on the FENDL libraries. The results of the experimental validation showed that the performance of FENDL-3.2b is at least as good and in most cases better than FENDL-2.1.
Future work will consider improved evaluations developed by the International Nuclear Data Evaluation Network (INDEN). Additional work will be needed to investigate differences in gas production in structural materials. Covariance matrices need to be updated to support the development of fusion technology. Additional validation work for high-energy neutrons, protons and deuterons, and the activation library will be needed.
△ Less
Submitted 17 November, 2023; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Compilation of isomeric ratios of light particle induced nuclear reactions
Authors:
A. Rodrigo,
N. Otuka,
S. Takács,
A. J. Koning
Abstract:
Experimental isomeric ratios of light (A$\le$4) particle-induced nuclear reactions were compiled for the product nuclides having metastable states with half-lives longer than 0.1 sec. The experimental isomeric ratio data were taken from the EXFOR library and reviewed. When an experiment reports isomer production cross sections instead of isomeric ratios, the cross sections taken from the EXFOR lib…
▽ More
Experimental isomeric ratios of light (A$\le$4) particle-induced nuclear reactions were compiled for the product nuclides having metastable states with half-lives longer than 0.1 sec. The experimental isomeric ratio data were taken from the EXFOR library and reviewed. When an experiment reports isomer production cross sections instead of isomeric ratios, the cross sections taken from the EXFOR library were converted to the isomeric ratios by us. During compilation, questionable data (e.g.,preliminary data compiled in EXFOR in parallel with their final data, sum of isomer production cross sections larger than the total production cross sections) were excluded. As an application of the new compilation, goodness-of-fit was studied for the isomeric ratios predicted by the reaction model code TALYS-1.96.
△ Less
Submitted 8 August, 2023; v1 submitted 16 March, 2023;
originally announced March 2023.
-
Measurement and Modeling of Proton-Induced Reactions on Arsenic from 35 to 200 MeV
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Arjan J. Koning,
Amanda M. Lewis,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}…
▽ More
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}$Se have insufficient nuclear data for efficient production using regional 100-200 MeV high-intensity proton accelerators. In order to address this deficiency, stacked-target irradiations were performed at LBNL, LANL, and BNL to measure the production of the $^{72}$Se/$^{72}$As PET generator system via $^{75}$As(p,x) between 35 and 200 MeV. This work provides the most well-characterized excitation function for $^{75}$As(p,4n)$^{72}$Se starting from threshold. Additional focus was given to report the first measurements of $^{75}$As(p,x)$^{68}$Ge and bolster an already robust production capability for the highly valuable $^{68}$Ge/$^{68}$Ga PET generator. Thick target yield comparisons with prior established formation routes to both generators are made. In total, high-energy proton-induced cross sections are reported for 55 measured residual products from $^{75}$As, Cu, and Ti targets, where the latter two materials were present as monitor foils. These results were compared with literature data as well as the default theoretical calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. Reaction modeling at these energies is typically unsatisfactory due to few prior published data and many interacting physics models. Therefore, a detailed assessment of the TALYS code was performed with simultaneous parameter adjustments applied according to a standardized procedure. Particular attention was paid to the formulation of the two-component exciton model in the transition between the compound and pre-equilibrium regions, with a linked investigation of level density models for nuclei off of stability and their impact on modeling predictive power.
△ Less
Submitted 11 June, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Investigating High-Energy Proton-Induced Reactions on Spherical Nuclei: Implications for the Pre-Equilibrium Exciton Model
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Amanda M. Lewis,
Arjan J. Koning,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction m…
▽ More
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction modes and a lack of existing guiding cross section data. A Tri-lab collaboration has been formed among the Lawrence Berkeley, Los Alamos, and Brookhaven National Laboratories to address these complexities by characterizing charged-particle nuclear reactions relevant to the production of established and novel radioisotopes. In the inaugural collaboration experiments, stacked-targets of niobium foils were irradiated at the Brookhaven Linac Isotope Producer (E$_p$=200 MeV) and the Los Alamos Isotope Production Facility (E$_p$=100 MeV) to measure $^{93}$Nb(p,x) cross sections between 50 and 200 MeV. The measured cross-section results were compared with literature data as well as the default calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. We developed a standardized procedure that determines the reaction model parameters that best reproduce the most prominent reaction channels in a physically justifiable manner. The primary focus of the procedure was to determine the best parametrization for the pre-equilibrium two-component exciton model. This modeling study revealed a trend toward a relative decrease for internal transition rates at intermediate proton energies (E$_p$=20-60 MeV) in the current exciton model as compared to the default values. The results of this work are instrumental for the planning, execution, and analysis essential to isotope production.
△ Less
Submitted 5 April, 2021; v1 submitted 24 October, 2020;
originally announced October 2020.
-
HPRL -- International cooperation to identify and monitor priority nuclear data needs for nuclear applications
Authors:
E. Dupont,
M. Bossant,
R. Capote,
A. D. Carlson,
Y. Danon,
M. Fleming,
Z. Ge,
H. Harada,
O. Iwamoto,
N. Iwamoto,
A. Kimura,
A. J. Koning,
C. Massimi,
A. Negret,
G. Noguere,
A. Plompen,
V. Pronyaev,
G. Rimpault,
S. Simakov,
A. Stankovskiy,
W. Sun,
A. Trkov,
H. Wu,
K. Yokoyama
Abstract:
The OECD-NEA High Priority Request List (HPRL) is a point of reference to guide and stimulate the improvement of nuclear data for nuclear energy and other applications, and a tool to bridge the gap between data users and producers. The HPRL is application-driven and the requests are submitted by nuclear data users or representatives of the user's communities. A panel of international experts revie…
▽ More
The OECD-NEA High Priority Request List (HPRL) is a point of reference to guide and stimulate the improvement of nuclear data for nuclear energy and other applications, and a tool to bridge the gap between data users and producers. The HPRL is application-driven and the requests are submitted by nuclear data users or representatives of the user's communities. A panel of international experts reviews and monitors the requests in the framework of an Expert Group mandated by the NEA Nuclear Science Committee Working Party on International Nuclear Data Evaluation Cooperation (WPEC). After approval, individual requests are classified to three categories: high priority requests, general requests, and special purpose requests (e.g., dosimetry, standards). The HPRL is hosted by the NEA in the form of a relational database publicly available on the web. This paper provides an overview of HPRL entries, status and outlook. Examples of requests successfully completed are given and new requests are described with emphasis on updated nuclear data needs in the fields of nuclear energy, neutron standards and dosimetry.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Iterative Bayesian Monte Carlo for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
M. Wohlmuther,
M. Hursin,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random in…
▽ More
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random input files with unique model combinations. All the models considered were assumed to be equal a priori. Parameters to these models were then varied simultaneously using the TALYS code system to produce a set of random ENDF files which were processed into x-y tables for comparison with selected experimental data from the EXFOR database within a Bayesian framework. To improve our fit to experimental data, we iteratively update our 'best' file - the file that maximises the likelihood function - by re-sampling model parameters around this file. The method proposed has been applied for the evaluation of p+Cd-111 and Co-59 between 1 - 100 MeV incident energy region. Finally, the adjusted files were compared with experimental data from the EXFOR database as well as with evaluations from the TENDL-2017 and JENDL-4.0/HE nuclear data libraries.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
In search of the best nuclear data file for proton induced reactions: varying both models and their parameters
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
R. M. Bergmann,
M. Wohlmuther,
A. J. Koning,
H. Ferroukhi
Abstract:
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to…
▽ More
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to identify the 'best' nuclear reaction models with their parameter sets that reproduces carefully selected experimental data. Three sets of experimental data from EXFOR are used in this work: (1) cross sections of the target nucleus (2) cross sections of the residual nuclei and (3) angular distributions. Selected models and their parameters were varied simultaneously to produce a large set of random nuclear data files. The goodness of fit between our adjustments and experimental data was achieved by computing a global reduced chi square which took into consideration the above listed experimental data. The method has been applied for the adjustment of proton induced reactions on Co-59 between 1 to 100 MeV. The adjusted files obtained are compared with available experimental data and evaluations from other nuclear data libraries.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
$γ$-ray Strength Function for Barium Isotopes
Authors:
H. Utsunomiya,
T. Renstrøm,
G. M. Tveten,
S. Goriely,
T. Ari-izumi,
V. W. Ingeberg,
B. V. Kheswa,
Y. -W. Lui,
S. Miyamoto,
S. Hilaire,
S. Péru,
A. J. Koning
Abstract:
Photoneutron cross sections were measured for $^{137}$Ba and $^{138}$Ba at energies below two-neutron threshold using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The photoneutron data are used to constrain the $γ$-ray strength function on the basis of the Hartree-Fock-Bogolyubov plus quasi-particle random phase approximati…
▽ More
Photoneutron cross sections were measured for $^{137}$Ba and $^{138}$Ba at energies below two-neutron threshold using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The photoneutron data are used to constrain the $γ$-ray strength function on the basis of the Hartree-Fock-Bogolyubov plus quasi-particle random phase approximation using the Gogny D1M interaction. Supplementing the experimentally constrained $γ$-ray strength function with the zero-limit E1 and M1 contributions which are unique to the deexcitation mode, we discuss radiative neutron capture cross sections relevant to the s-process nucleosynthesis of barium isotopes in the vicinity of the neutron magic number 82.
△ Less
Submitted 26 August, 2019; v1 submitted 14 June, 2019;
originally announced June 2019.
-
Bayesian updating for data adjustments and multi-level uncertainty propagation within Total Monte Carlo
Authors:
E. Alhassan,
D. Rochman,
H. Sjöstrand,
A. Vasiliev,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, a method is proposed for combining differential and integral benchmark experimental data within a Bayesian framework for nuclear data adjustments and multi-level uncertainty propagation using the Total Monte Carlo method. First, input parameters to basic nuclear physics models implemented within the state of the art nuclear reactions code, TALYS, were sampled from uniform distributio…
▽ More
In this work, a method is proposed for combining differential and integral benchmark experimental data within a Bayesian framework for nuclear data adjustments and multi-level uncertainty propagation using the Total Monte Carlo method. First, input parameters to basic nuclear physics models implemented within the state of the art nuclear reactions code, TALYS, were sampled from uniform distributions and randomly varied to produce a large set of random nuclear data files. Next, a probabilistic data assimilation was carried out by computing the likelihood function for each random nuclear data file based first on only differential experimental data (1st update) and then on integral benchmark data (2nd update). The individual likelihood functions from the two updates were then combined into a global likelihood function which was used for the selection of the final 'best' file. The proposed method has been applied for the adjustment of $^{208}$Pb in the fast neutron energy region below 20 MeV. The 'best' file from the adjustments was compared with available experimental data from the EXFOR database as well as evaluations from the major nuclear data libraries and found to compare favourably.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
The $γ$-ray strength function for Thallium isotopes relevant to the $^{205}$Pb - $^{205}$Tl chronometry
Authors:
H. Utsunomiya,
T. Renstrøm,
G. M. Tveten,
S. Goriely,
T. Ari-izumi,
D. Filipescu,
J. Kaur,
Y. -W. Lui,
W. Luo,
S. Miyamoto,
A. C. Larsen,
S. Hilaire,
S. Péru,
A. J. Koning
Abstract:
Photoneutron cross sections were measured for $^{203}$Tl and $^{205}$Tl at energies between the one- and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. Our new measurement results in cross sections significantly different from the previously reported bremsstrahlung experiment, leading to rather di…
▽ More
Photoneutron cross sections were measured for $^{203}$Tl and $^{205}$Tl at energies between the one- and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. Our new measurement results in cross sections significantly different from the previously reported bremsstrahlung experiment, leading to rather different GDR parameters, in particular to lower GDR peak energies and higher peak cross sections. The photoneutron data are used to constrain the $γ$-ray strength function on the basis of the Hartree-Fock-Bogolyubov plus quasi-particle random phase approximation using the Gogny D1M interaction. Supplementing the experimentally constrained $γ$-ray strength function with the zero-limit E1 and M1 contributions for the de-excitation mode, we estimate the Maxwellian-averaged cross section for the s-process branching-point nucleus $^{204}$Tl in the context of the $^{205}$Pb - $^{205}$Tl chronometry.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.
-
Photoneutron cross sections for Ni isotopes: Toward understanding $(n,γ)$ cross sections relevant to the weak s-process nucleosynthesis
Authors:
H. Utsunomiya,
T. Renstrøm,
G. M. Tveten,
S. Goriely,
S. Katayama,
T. Ari-izumi,
D. Takenaka,
D. Symochko,
B. V. Kheswa,
V. W. Ingeberg,
T. Glodariu,
Y. -W. Lui,
S. Miyamoto,
A. C. Larsen,
J. E. Midtbø,
A. Görgen,
S. Siem,
L. Crespo Campo,
M. Guttormsen,
S. Hilaire,
S. Péru,
A. J. Koning
Abstract:
Photoneutron cross sections were measured for $^{58}$Ni, $^{60}$Ni, $^{61}$Ni, and $^{64}$Ni at energies between the one-neutron and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The new photoneutron data are used to extract the $γ$-ray strength function above the neutron threshold complementing…
▽ More
Photoneutron cross sections were measured for $^{58}$Ni, $^{60}$Ni, $^{61}$Ni, and $^{64}$Ni at energies between the one-neutron and two-neutron thresholds using quasi-monochromatic $γ$-ray beams produced in laser Compton-scattering at the NewSUBARU synchrotron radiation facility. The new photoneutron data are used to extract the $γ$-ray strength function above the neutron threshold complementing the information obtained by the Oslo method below the threshold. We discuss radiative neutron capture cross sections and the Maxwellian-averaged cross sections for Ni isotopes including $^{63}$Ni, a branching point nucleus along the weak s-process path. The cross sections are calculated with the experimentally constrained $γ$-ray strength functions from the Hartree-Fock-Bogolyubov plus quasi-particle-random phase approximation based on the Gogny D1M interaction for both $E1$ and $M1$ components and supplemented with the $M1$ upbend.
△ Less
Submitted 7 October, 2018; v1 submitted 23 April, 2018;
originally announced April 2018.
-
Light-ion production in the interaction of 175 MeV quasi-mono-energetic neutrons with iron and with bismuth
Authors:
R. Bevilacqua,
K. Jansson,
S. Pomp,
P. Andersson,
J. Blomgren,
C. Gustavsson,
A. Hjalmarsson,
V. D. Simutkin,
M. Österlund,
A. J. Koning,
A. V. Prokofiev,
M. Hayashi,
S. Hirayama,
Y. Naitou,
Y. Watanabe,
U. Tippawan,
S. G. Mashnik,
L. M. Kerby,
F. -R. Lecolley,
N. Marie,
J. -C. David,
S. Leray
Abstract:
Nuclear data for neutron-induced reactions in the intermediate energy range of 20 to 200 MeV are of great importance for the development of nuclear reaction codes since little data exist in that range. Also several different applications benefit from such data, notably accelerator-driven incineration of nuclear waste. The Medley setup was used for a series of measurements of p, d, t, $^3$He and…
▽ More
Nuclear data for neutron-induced reactions in the intermediate energy range of 20 to 200 MeV are of great importance for the development of nuclear reaction codes since little data exist in that range. Also several different applications benefit from such data, notably accelerator-driven incineration of nuclear waste. The Medley setup was used for a series of measurements of p, d, t, $^3$He and $α$-particle production by 175 MeV quasi-mono-energetic neutrons on various target nuclei. The measurements were performed at the The Svedberg Laboratory in Uppsala, Sweden. Eight detector telescopes placed at angles between 20$^\circ$ and 160$^\circ$ were used. Medley uses the $ΔE$-$ΔE$-$E$ technique to discriminate among the particle types and is able to measure double-differential cross sections over a wide range of particle energies. This paper briefly describes the experimental setup, summarizes the data analysis and reports on recent changes in the previously reported preliminary data set on bismuth. Experimental data are compared with INCL4.5-Abla07, MCNP6 using CEM03.03, TALYS and PHITS model calculations as well as with nuclear data evaluations. The models agree fairly well overall but in some cases systematic differences are found.
△ Less
Submitted 12 November, 2014;
originally announced November 2014.
-
Does deuteron-induced fission on actinide nuclei prevails over the breakup at low incident energies?
Authors:
M. Avrigeanu,
V. Avrigeanu,
A. J. Koning
Abstract:
An analysis of the $^{231}$Pa$(d,3n)$$^{230}$U reaction excitation function at energies around the Coulomb barrier has taken into account the pre-equilibrium and compound-nucleus cross sections corrected for the deuteron-breakup decrease of the total reaction cross section, as well as the inelastic breakup enhancement. The analysis reveals the dominance of the deuteron breakup mechanism unlike a f…
▽ More
An analysis of the $^{231}$Pa$(d,3n)$$^{230}$U reaction excitation function at energies around the Coulomb barrier has taken into account the pre-equilibrium and compound-nucleus cross sections corrected for the deuteron-breakup decrease of the total reaction cross section, as well as the inelastic breakup enhancement. The analysis reveals the dominance of the deuteron breakup mechanism unlike a former assessment in this respect of the deuteron-induced fission process.
△ Less
Submitted 8 December, 2011;
originally announced December 2011.
-
Low and medium energy deuteron-ind ced reactions on $^{63,65}$Cu nuclei
Authors:
E. Simeckova,
P. Bém,
M. Honusek,
M. Stefánik,
U. Fischer,
S. P. Simakov,
R. A. Forrest,
A. J. Koning,
J. -C. Sublet,
M. Avrigeanu,
F. L. Roman,
V. Avrigeanu
Abstract:
The activation cross sections of (d,p), (d,2n), (d,3n), and (d,2p) reactions on 63,65Cu were measured in the energy range from 4 to 20 MeV using the stacked-foils technique. Then, following the available elastic-scattering data analysis that provided the optical potential for reaction cross sections calculations, an increased effort has been devoted to the breakup mechanism, the direct reaction st…
▽ More
The activation cross sections of (d,p), (d,2n), (d,3n), and (d,2p) reactions on 63,65Cu were measured in the energy range from 4 to 20 MeV using the stacked-foils technique. Then, following the available elastic-scattering data analysis that provided the optical potential for reaction cross sections calculations, an increased effort has been devoted to the breakup mechanism, the direct reaction stripping, and the pre-equilibrium and compound-nucleus cross section calculations, corrected for the breakup and stripping decrease of the total reaction cross section. The overall agreement between the measured and calculated deuteron activation cross sections proves the correctness of the nuclear mechanisms account, next to the simultaneous analysis of the elastic-scattering and reaction data.
△ Less
Submitted 24 June, 2011;
originally announced June 2011.
-
Light-ion production in the interaction of 96 MeV neutrons with carbon
Authors:
U. Tippawan,
S. Pomp,
J. Blomgren,
S. Dangtip,
C. Gustavsson,
J. Klug,
P. Nadel-Turonski,
L. Nilsson,
M. Österlund,
N. Olsson,
O. Jonsson,
A. V. Prokofiev,
P. -U. Renberg,
V. Corcalciuc,
Y. Watanabe,
A. J. Koning
Abstract:
Double-differential cross sections for light-ion (p, d, t, 3He and alpha) production in carbon induced by 96 MeV neutrons have been measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Experimental techniques are presented as well as procedures for data taking and data reduction. Deduced energy-differential, angle-differential and production cross sections a…
▽ More
Double-differential cross sections for light-ion (p, d, t, 3He and alpha) production in carbon induced by 96 MeV neutrons have been measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Experimental techniques are presented as well as procedures for data taking and data reduction. Deduced energy-differential, angle-differential and production cross sections are reported. Experimental cross sections are compared with theoretical reaction model calculations and experimental data in the literature. The measured particle data show marked discrepancies from the results of the model calculations in spectral shape and magnitude. The measured production cross sections for protons, deuterons, tritons, 3He, and alpha particles support the trends suggested by data at lower energies.
△ Less
Submitted 3 December, 2008;
originally announced December 2008.
-
Improved predictions of nuclear reaction rates with the TALYS reaction code for astrophysical applications
Authors:
S. Goriely,
S. Hilaire,
A. J. Koning
Abstract:
Nuclear reaction rates of astrophysical applications are traditionally determined on the basis of Hauser-Feshbach reaction codes. These codes adopt a number of approximations that have never been tested, such as a simplified width fluctuation correction, the neglect of delayed or multiple-particle emission during the electromagnetic decay cascade, or the absence of the pre-equilibrium contributi…
▽ More
Nuclear reaction rates of astrophysical applications are traditionally determined on the basis of Hauser-Feshbach reaction codes. These codes adopt a number of approximations that have never been tested, such as a simplified width fluctuation correction, the neglect of delayed or multiple-particle emission during the electromagnetic decay cascade, or the absence of the pre-equilibrium contribution at increasing incident energies.
The reaction code TALYS has been recently updated to estimate the Maxwellian-averaged reaction rates that are of astrophysical relevance. These new developments enable the reaction rates to be calculated with increased accuracy and reliability and the approximations of previous codes to be investigated.
The TALYS predictions for the thermonuclear rates of relevance to astrophysics are detailed and compared with those derived by widely-used codes for the same nuclear ingredients. It is shown that TALYS predictions may differ significantly from those of previous codes, in particular for nuclei for which no or little nuclear data is available. The pre-equilibrium process is shown to influence the astrophysics rates of exotic neutron-rich nuclei significantly. For the first time, the Maxwellian-averaged (n,2n) reaction rate is calculated for all nuclei and its competition with the radiative capture rate is discussed.
The TALYS code provides a new tool to estimate all nuclear reaction rates of relevance to astrophysics with improved accuracy and reliability.
△ Less
Submitted 13 June, 2008;
originally announced June 2008.
-
Fast-neutron induced pre-equilibrium reactions on 55Mn and 63,65Cu at energies up to 40 MeV
Authors:
M. Avrigeanu,
S. V. Chuvaev,
A. A. Filatenkov,
R. A. Forrest,
M. Herman,
A. J. Koning,
A. J. M. Plompen,
F. L. Roman,
V. Avrigeanu
Abstract:
Excitation functions were measured for the $^{55}$Mn(n,2n)$^{54}$Mn, $^{55}$Mn(n,$α$)$^{52}$V, $^{63}$Cu(n,$α$)$^{60}$Co, $^{65}$Cu(n,2n)$^{64}$Cu, and $^{65}$Cu(n,p)$^{65}$Ni reactions from 13.47 to 14.83 MeV. The experimental cross sections are compared with the results of calculations including all activation channels for the stable isotopes of Mn and Cu, for neutron incident energies up to 5…
▽ More
Excitation functions were measured for the $^{55}$Mn(n,2n)$^{54}$Mn, $^{55}$Mn(n,$α$)$^{52}$V, $^{63}$Cu(n,$α$)$^{60}$Co, $^{65}$Cu(n,2n)$^{64}$Cu, and $^{65}$Cu(n,p)$^{65}$Ni reactions from 13.47 to 14.83 MeV. The experimental cross sections are compared with the results of calculations including all activation channels for the stable isotopes of Mn and Cu, for neutron incident energies up to 50 MeV. Within the energy range up to 20 MeV the model calculations are most sensitive to the parameters related to nuclei in the early stages of the reaction, while the model assumptions are better established by analysis of the data in the energy range 20-40 MeV. While the present analysis has taken advantage of both a new set of accurate measured cross sections around 14 MeV and the larger data basis fortunately available between 20 and 40 MeV for the Mn and Cu isotopes, the need of additional measurements below as well as above 40 MeV is pointed out. Keywords: 55Mn, 63,65Cu, E$\leq$40 MeV, Neutron activation cross section measurements, Nuclear reactions, Model calculations, Manganese, Copper
△ Less
Submitted 5 December, 2007;
originally announced December 2007.
-
Photodisintegration of Ultra-High-Energy Cosmic Rays revisited
Authors:
E. Khan,
S. Goriely,
D. Allard,
E. Parizot,
T. Suomijarvi,
A. J. Koning,
S. Hilaire,
M. C. Duijvestijn
Abstract:
Recent microscopic and phenomenological calculations of giant dipole resonances for A <= 56 nuclei are presented. The derived photodisintegration cross sections are exhaustively compared to the photonuclear data available to date. An accurate description of the data is found. Our new calculations are also compared with the previous and widely-used estimates of Puget, Stecker and Bredekamp. The p…
▽ More
Recent microscopic and phenomenological calculations of giant dipole resonances for A <= 56 nuclei are presented. The derived photodisintegration cross sections are exhaustively compared to the photonuclear data available to date. An accurate description of the data is found. Our new calculations are also compared with the previous and widely-used estimates of Puget, Stecker and Bredekamp. The present calculations also include all the possible paths down the nuclear chart. The impact on the photodisintegration of ultra-high-energy cosmic rays (UHECR) is illustrated for a Fe source with typical energies of 10^{20-21} eV. At energies around 10^20 eV, the new cross sections are found to modify the UHECR photodisintegration rates. At energies around 10^21 eV, it is recommended to solve a full reaction network to estimate the photodisintegration rate of the UHECR.
△ Less
Submitted 4 December, 2004;
originally announced December 2004.
