Showing 1–11 of 11 results for author: Kiani, M T

Nanomolding single-crystalline CoIn3 and RhIn3 nanowires

Authors: Nghiep Khoan Duong, Christian D. Multunas, Thomas Whoriskey, Mehrdad T. Kiani, Shanta R. Saha, Quynh P. Sam, Han Wang, Satya Kushwaha, Johnpierre Paglione, Ravishankar Sundararaman, Judy J. Cha

Abstract: Intermetallic compounds containing transition metals and group III-V metals tend to possess strong correlations and high catalytic activities, both of which can be enhanced via reduced dimensionality. Nanostructuring is an effective approach to explore this possibility, yet the synthesis of nanostructured intermetallics is challenging due to vast differences in melting points and vapor pressures o… ▽ More Intermetallic compounds containing transition metals and group III-V metals tend to possess strong correlations and high catalytic activities, both of which can be enhanced via reduced dimensionality. Nanostructuring is an effective approach to explore this possibility, yet the synthesis of nanostructured intermetallics is challenging due to vast differences in melting points and vapor pressures of the constituent elements. In this work, we demonstrate that this challenge can be overcome with thermomechanical nanomolding (TMNM), exemplified by the synthesis of intermetallic CoIn3 and RhIn3 nanowires. We show that TMNM successfully extrudes single-crystalline nanowires of these compounds down to the 20 nm diameter range, and the nanowires remain metallic with resistivity values higher than calculated bulk resistivity. We discuss possible effects of surface roughness scattering, vacancy-induced scattering, and surface oxidation, on the measured resistivities of the nanowires. For CoIn3 nanowires, the measured resistivity values are the first reported values for this compound. △ Less

Submitted 28 March, 2025; originally announced March 2025.

Surface-dominant transport in Weyl semimetal NbAs nanowires for next-generation interconnects

Authors: Yeryun Cheon, Mehrdad T. Kiani, Yi-Hsin Tu, Sushant Kumar, Nghiep Khoan Duong, Jiyoung Kim, Quynh P. Sam, Han Wang, Satya K. Kushwaha, Nicolas Ng, Seng Huat Lee, Sam Kielar, Chen Li, Dimitrios Koumoulis, Saif Siddique, Zhiqiang Mao, Gangtae Jin, Zhiting Tian, Ravishankar Sundararaman, Hsin Lin, Gengchiau Liang, Ching-Tzu Chen, Judy J. Cha

Abstract: Ongoing demands for smaller and more energy efficient electronic devices necessitate alternative interconnect materials with lower electrical resistivity at reduced dimensions. Despite the emergence of many promising candidates, synthesizing high quality nanostructures remains a major bottleneck in evaluating their performance. Here, we report the successful synthesis of Weyl semimetal NbAs nanowi… ▽ More Ongoing demands for smaller and more energy efficient electronic devices necessitate alternative interconnect materials with lower electrical resistivity at reduced dimensions. Despite the emergence of many promising candidates, synthesizing high quality nanostructures remains a major bottleneck in evaluating their performance. Here, we report the successful synthesis of Weyl semimetal NbAs nanowires via thermomechanical nanomolding, achieving single crystallinity and controlled diameters as small as 40 nm. Our NbAs nanowires exhibit a remarkably low room-temperature resistivity of 9.7 +/- 1.6 microOhm-cm, which is three to four times lower than their bulk counterpart. Theoretical calculations corroborate the experimental observations, attributing this exceptional resistivity reduction to surface dominant conduction with long carrier lifetime at finite temperatures. Further characterization of NbAs nanowires and bulk single crystals reveals high breakdown current density, robust stability, and superior thermal conductivity. Collectively, these properties highlight the strong potential of NbAs nanowires as next-generation interconnects, which can surpass the limitations of current copper-based interconnects. Technologically, our findings present a practical application of topological materials, while scientifically showcasing the fundamental properties uniquely accessible in nanoscale platforms. △ Less

Submitted 7 March, 2025; v1 submitted 6 March, 2025; originally announced March 2025.

Comments: 5 figures

Vacancy-induced suppression of CDW order and its impact on magnetic order in kagome antiferromagnet FeGe

Authors: Mason L. Klemm, Saif Siddique, Yuan-Chun Chang, Sijie Xu, Yaofeng Xie, Tanner Legvold, Mehrdad T. Kiani, Feng Ye, Huibo Cao, Yiqing Hao, Wei Tian, Hubertus Luetkens, Masaaki Matsuda, Douglas Natelson, Zurab Guguchia, Chien-Lung Huang, Ming Yi, Judy J. Cha, Pengcheng Dai

Abstract: Two-dimensional (2D) kagome lattice metals are interesting because they display flat electronic bands, Dirac points, Van Hove singularities, and can have interplay between charge density wave (CDW), magnetic order, and superconductivity. In kagome lattice antiferromagnet FeGe, a short-range CDW order was found deep within an antiferromagnetically ordered state, interacting with the magnetic order.… ▽ More Two-dimensional (2D) kagome lattice metals are interesting because they display flat electronic bands, Dirac points, Van Hove singularities, and can have interplay between charge density wave (CDW), magnetic order, and superconductivity. In kagome lattice antiferromagnet FeGe, a short-range CDW order was found deep within an antiferromagnetically ordered state, interacting with the magnetic order. Surprisingly, post-growth annealing of FeGe at 560$^{\circ}$C can suppress the CDW order while annealing at 320$^{\circ}$C induces a long-range CDW order, with the ability to cycle between the states repeatedly by annealing. Here we perform transport, neutron scattering, scanning transmission electron microscopy (STEM), and muon spin rotation ($μ$SR) experiments to unveil the microscopic mechanism of the annealing process and its impact on magneto-transport, CDW, and magnetic properties of FeGe. We find that 560$^{\circ}$C annealing creates germanium vacancies uniformly distributed throughout the FeGe kagome lattice, which prevent the formation of Ge-Ge dimers necessary for the CDW order. Upon annealing at 320$^{\circ}$C, the system segregates into stoichiometric FeGe regions with long-range CDW order and regions with stacking faults that act as nucleation sites for the CDW. The presence or absence of CDW order greatly affects the anomalous Hall effect, incommensurate magnetic order, and spin-lattice coupling in FeGe, thus placing FeGe as the only known kagome lattice material with a tunable CDW and magnetic order, potentially useful for sensing and information transmission. △ Less

Submitted 17 October, 2024; originally announced October 2024.

1D-confined crystallization routes for tungsten phosphides

Authors: Gangtae Jin, Christian D. Multunas, James L. Hart, Mehrdad T. Kiani, Quynh P. Sam, Han Wang, Yeryun Cheon, Khoan Duong, David J. Hynek, Hyeuk Jin Han, Ravishankar Sundararaman, Judy J. Cha

Abstract: Topological materials confined in one-dimension (1D) can transform computing technologies, such as 1D topological semimetals for nanoscale interconnects and 1D topological superconductors for fault-tolerant quantum computing. As such, understanding crystallization of 1D-confined topological materials is critical. Here, we demonstrate 1D-confined crystallization routes during template-assisted nano… ▽ More Topological materials confined in one-dimension (1D) can transform computing technologies, such as 1D topological semimetals for nanoscale interconnects and 1D topological superconductors for fault-tolerant quantum computing. As such, understanding crystallization of 1D-confined topological materials is critical. Here, we demonstrate 1D-confined crystallization routes during template-assisted nanowire synthesis where we observe diameter-dependent phase selectivity for topological metal tungsten phosphides. A phase bifurcation occurs to produce tungsten monophosphide and tungsten diphosphide at the cross-over nanowire diameter of ~ 35 nm. Four-dimensional scanning transmission electron microscopy was used to identify the two phases and to map crystallographic orientations of grains at a few nm resolution. The 1D-confined phase selectivity is attributed to the minimization of the total surface energy, which depends on the nanowire diameter and chemical potentials of precursors. Theoretical calculations were carried out to construct the diameter-dependent phase diagram, which agrees with experimental observations. Our find-ings suggest a new crystallization route to stabilize topological materials confined in 1D. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Comments: 5 figures

Wafer-scale fabrication of 2D nanostructures via thermomechanical nanomolding

Authors: Mehrdad T Kiani, Quynh P Sam, Yeon Sik Jung, Hyeuk Jin Han, Judy J Cha

Abstract: With shrinking dimensions in integrated circuits, sensors, and functional devices, there is a pressing need to develop nanofabrication techniques with simultaneous control of morphology, microstructure, and material composition over wafer length scales. Current techniques are largely unable to meet all these conditions, suffering from poor control of morphology and defect structure or requiring ex… ▽ More With shrinking dimensions in integrated circuits, sensors, and functional devices, there is a pressing need to develop nanofabrication techniques with simultaneous control of morphology, microstructure, and material composition over wafer length scales. Current techniques are largely unable to meet all these conditions, suffering from poor control of morphology and defect structure or requiring extensive optimization or post-processing to achieve desired nanostructures. Recently, thermomechanical nanomolding (TMNM) has been shown to yield single-crystalline, high aspect ratio nanowires of metals, alloys, and intermetallics over wafer-scale distances. Here, we extend TMNM for wafer-scale fabrication of 2D nanostructures. Using Cu, we successfully nanomold Cu nanoribbons with widths < 50 nm, depths ~ 0.5-1 microns and lengths ~ 7 mm into Si trenches at conditions compatible with back end of line processing. Through SEM cross-section imaging and 4D-STEM grain orientation maps, we show that the grain size of the bulk feedstock is transferred to the nanomolded structures up to and including single crystal Cu. Based on the retained microstructures of molded 2D Cu, we discuss the deformation mechanism during molding for 2D TMNM. △ Less

Submitted 16 June, 2023; originally announced June 2023.

Comments: 4 figures

Nanomolding of Metastable Mo$_{4}$P$_{3}$

Authors: Mehrdad T Kiani, Quynh P Sam, Gangtae Jin, Betül Pamuk, Hyeuk Jin Han, James L. Hart, J. R. Stauff, Judy J Cha

Abstract: Reduced dimensionality leads to emergent phenomena in quantum materials and there is a need for accelerated materials discovery of nanoscale quantum materials in reduced dimensions. Thermomechanical nanomolding is a rapid synthesis method that produces high quality single-crystalline quantum nanowires with controlled dimensions over wafer-scale sizes. Herein, we apply nanomolding to fabricate nano… ▽ More Reduced dimensionality leads to emergent phenomena in quantum materials and there is a need for accelerated materials discovery of nanoscale quantum materials in reduced dimensions. Thermomechanical nanomolding is a rapid synthesis method that produces high quality single-crystalline quantum nanowires with controlled dimensions over wafer-scale sizes. Herein, we apply nanomolding to fabricate nanowires from bulk feedstock of MoP, a triple-point topological metal with extremely high conductivity that is promising for low-resistance interconnects. Surprisingly, we obtained single-crystalline Mo$_{4}$P$_{3}$ nanowires, a metastable phase at room temperature in atmospheric pressure. We thus demonstrate nanomolding can create metastable phases inaccessible by other nanomaterial syntheses and can explore a previously inaccessible synthesis space at high temperatures and pressures. Furthermore, our results suggest that the current understanding of interfacial solid diffusion for nanomolding is incomplete, providing opportunities to explore solid-state diffusion at high-pressure and high-temperature regimes in confined dimensions. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: 3 figures

Ultrastable Metallic Glass Nanoparticles with Size-Dependent Mechanical Properties

Authors: Abhinav Parakh, Mehrdad T. Kiani, Anabelle Colmenares, Andrew C. Lee, Guoyin Shen, Stella Chariton, Vitali B. Prakapenka, X. Wendy Gu

Abstract: The atomistic structure of metallic glasses is closely related to properties such as strength and ductility. Here, Ni1-xBx metallic glass nanoparticles of two different sizes are compressed under quasi-hydrostatic high-pressure conditions in order to understand structural changes under stress. The structural changes in the nanoparticles were tracked using in situ high-pressure X-ray diffraction (X… ▽ More The atomistic structure of metallic glasses is closely related to properties such as strength and ductility. Here, Ni1-xBx metallic glass nanoparticles of two different sizes are compressed under quasi-hydrostatic high-pressure conditions in order to understand structural changes under stress. The structural changes in the nanoparticles were tracked using in situ high-pressure X-ray diffraction (XRD). The ambient pressure pair-distribution functions generated from XRD showed that the smaller sized nanoparticles had a more compact amorphous structure with lower coordination number. XRD showed that the amorphous structure was stable up to the maximum pressures achieved. The bulk modulus of the smaller and larger sized nanoparticles was found to be 208 GPa and 178 GPa, respectively. This size-dependent high-pressure behavior was related to compositional differences between the nanoparticles. These results show that Ni1-xBx metallic glass nanoparticles are highly stable under pressure, which could enable their use as inclusions in metal or ceramic matrix composites. △ Less

Submitted 29 June, 2022; originally announced June 2022.

Comments: 11 pages, 5 figures

High pressure induced precipitation in Al7075 alloy

Authors: Abhinav Parakh, Andrew C. Lee, Stella Chariton, Melody M. Wang, Mehrdad T. Kiani, Vitali B. Prakapenka, X. Wendy Gu

Abstract: Precipitate-matrix interactions govern the mechanical behavior of precipitate strengthened Al-based alloys. These alloys find a wide range of applications ranging from aerospace to automobile and naval industries due to their low cost and high strength to weight ratio. Structures made from Al-based alloys undergo complex loading conditions such as high strain rate impact, which involves high press… ▽ More Precipitate-matrix interactions govern the mechanical behavior of precipitate strengthened Al-based alloys. These alloys find a wide range of applications ranging from aerospace to automobile and naval industries due to their low cost and high strength to weight ratio. Structures made from Al-based alloys undergo complex loading conditions such as high strain rate impact, which involves high pressures. Here we use diamond anvil cells to study the behavior of Al-based Al7075 alloy under quasi-hydrostatic and non-hydrostatic pressure up to ~53 GPa. In situ X-ray diffraction (XRD) and pre- and post-compression transmission electron microscopy (TEM) imaging are used to analyze microstructural changes and estimate high pressure strength. We find a bulk modulus of 75.2 +- 1.9 GPa using quasi-hydrostatic pressure XRD measurements. XRD showed that non-hydrostatic pressure leads to a significant increase in defect density and peak broadening with pressure cycling. XRD mapping under non-hydrostatic pressure revealed that the region with the highest local pressure had the greatest increase in defect nucleation, whereas the region with the largest local pressure gradient underwent texturing and had larger grains. TEM analysis showed that pressure cycling led to the nucleation and growth of many precipitates. The significant increase in defect and precipitate density leads to an increase in strength for Al7075 alloy at high pressures. △ Less

Submitted 2 February, 2022; originally announced February 2022.

Comments: 15 pages, 5 figures

Extraordinary strain hardening from dislocation loops in defect-free Al nanocubes

Authors: Mehrdad T. Kiani, Zachary H. Aitken, Abhinav Parakh, Yong-Wei Zhang, X. Wendy Gu

Abstract: The interaction of crystalline defects leads to strain hardening in bulk metals. Metals with high stacking fault energy (SFE), such as aluminum, tend to have low strain hardening rates due to an inability to form stacking faults and deformation twins. Here, we use in situ SEM mechanical compressions to find that colloidally synthesized defect-free 114 nm Al nanocubes combine a high linear strain h… ▽ More The interaction of crystalline defects leads to strain hardening in bulk metals. Metals with high stacking fault energy (SFE), such as aluminum, tend to have low strain hardening rates due to an inability to form stacking faults and deformation twins. Here, we use in situ SEM mechanical compressions to find that colloidally synthesized defect-free 114 nm Al nanocubes combine a high linear strain hardening rate of 4.1 GPa with a high strength of 1.1 GPa. These nanocubes have a 3 nm self-passivating oxide layer that has a large influence on mechanical behavior and the accumulation of dislocation structures. Post-compression TEM imaging reveals stable prismatic dislocation loops and the absence of stacking faults. MD simulations relate the formation of dislocation loops and strain hardening to the surface oxide. These results indicate that slight modifications to surface and interfacial properties can induce enormous changes to mechanical properties in high SFE metals. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Comments: 10 pages, 7 figures

Journal ref: Nano Lett. 2022, 22, 10, 4036-4041

Stress Induced Structural Transformations in Au Nanocrystals

Authors: Abhinav Parakh, Sangryun Lee, Mehrdad T. Kiani, David Doan, Martin Kunz, Andrew Doran, Seunghwa Ryu, X. Wendy Gu

Abstract: Nanocrystals can exist in multiply twinned structures like the icosahedron, or single crystalline structures like the cuboctahedron or Wulff-polyhedron. Structural transformation between these polymorphic structures can proceed through diffusion or displacive motion. Experimental studies on nanocrystal structural transformations have focused on high temperature diffusion mediated processes. Thus,… ▽ More Nanocrystals can exist in multiply twinned structures like the icosahedron, or single crystalline structures like the cuboctahedron or Wulff-polyhedron. Structural transformation between these polymorphic structures can proceed through diffusion or displacive motion. Experimental studies on nanocrystal structural transformations have focused on high temperature diffusion mediated processes. Thus, there is limited experimental evidence of displacive motion mediated structural transformations. Here, we report the high-pressure structural transformation of 6 nm Au nanocrystals under nonhydrostatic pressure in a diamond anvil cell that is driven by displacive motion. In-situ X-ray diffraction and transmission electron microscopy were used to detect the transformation of multiply twinned nanocrystals into single crystalline nanocrystals. High-pressure single crystalline nanocrystals were recovered after unloading, however, the nanocrystals quickly reverted back to multiply twinned state after redispersion in toluene solvent. The dynamics of recovery was captured using transmission electron microscopy which showed that the recovery was governed by surface recrystallization and rapid twin boundary motion. We show that this transformation is energetically favorable by calculating the pressure-induced change in strain energy. Molecular dynamics simulations showed that defects nucleated from a region of high stress region in the interior of the nanocrystal, which make twin boundaries unstable. Deviatoric stress driven Mackay transformation and dislocation/disclination mediated detwinning are hypothesized as possible mechanisms of high-pressure structural transformation. △ Less

Submitted 28 August, 2020; originally announced August 2020.

Comments: 32 pages, 14 figures, and 1 movie (please open pdf with Adobe Acrobat Reader to see the embedded movie)

Nucleation of Dislocations in 3.9 nm Nanocrystals at High Pressure

Authors: Abhinav Parakh, Sangryun Lee, K. Anika Harkins, Mehrdad T. Kiani, David Doan, Martin Kunz, Andrew Doran, Lindsey A. Hanson, Seunghwa Ryu, X. Wendy Gu

Abstract: As circuitry approaches single nanometer length scales, it is important to predict the stability of metals at these scales. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.9 nm Au nanocrystals u… ▽ More As circuitry approaches single nanometer length scales, it is important to predict the stability of metals at these scales. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if dislocations can form and be sustained at single nanometer dimensions. Here, we report the formation of dislocations within individual 3.9 nm Au nanocrystals under nonhydrostatic pressure in a diamond anvil cell. We used a combination of x-ray diffraction, optical absorbance spectroscopy, and molecular dynamics simulation to characterize the defects that are formed, which were found to be surface-nucleated partial dislocations. These results indicate that dislocations are still active at single nanometer length scales and can lead to permanent plasticity. △ Less

Submitted 20 September, 2019; originally announced September 2019.

Comments: 33 pages, 12 figures

Journal ref: Phys. Rev. Lett. 124, 106104 (2020)