-
Native-oxide-passivated trilayer junctions for superconducting qubits
Authors:
Pankaj Sethi,
Om Prakash,
Jukka-Pekka Kaikkonen,
Mikael Kervinen,
Elsa T. Mannila,
Mário Ribeiro,
Debopam Datta,
Christopher W. Förbom,
Jorden Senior,
Renan P. Loreto,
Joel Hätinen,
Klaara Viisanen,
Jukka I. Väyrynen,
Alberto Ronzani,
Antti Kemppinen,
Visa Vesterinen,
Mika Prunnila,
Joonas Govenius
Abstract:
Superconducting qubits in today's quantum processing units are typically fabricated with angle-evaporated aluminum--aluminum-oxide--aluminum Josephson junctions. However, there is an urgent need to overcome the limited reproducibility of this approach when scaling up the number of qubits and junctions. Fabrication methods based on subtractive patterning of superconductor--insulator--superconductor…
▽ More
Superconducting qubits in today's quantum processing units are typically fabricated with angle-evaporated aluminum--aluminum-oxide--aluminum Josephson junctions. However, there is an urgent need to overcome the limited reproducibility of this approach when scaling up the number of qubits and junctions. Fabrication methods based on subtractive patterning of superconductor--insulator--superconductor trilayers, used for more classical large-scale Josephson junction circuits, could provide the solution but they in turn often suffer from lossy dielectrics incompatible with high qubit coherence. In this work, we utilize native aluminum oxide as a sidewall passivation layer for junctions based on aluminum--aluminum-oxide--niobium trilayers, and use such junctions in qubits. We design the fabrication process such that the few-nanometer-thin native oxide is not exposed to oxide removal steps that could increase its defect density or hinder its ability to prevent shorting between the leads of the junction. With these junctions, we design and fabricate transmon-like qubits and measure time-averaged coherence times up to 30 $μ$s at a qubit frequency of 5 GHz, corresponding to a qubit quality factor of one million. Our process uses subtractive patterning and optical lithography on wafer scale, enabling high throughput in patterning. This approach provides a scalable path toward fabrication of superconducting qubits on industry-standard platforms.
△ Less
Submitted 4 April, 2025;
originally announced April 2025.
-
In-situ electro-optic sampling of microwave signals under cryogenic conditions and for superconducting applications
Authors:
Shekhar Priyadarshi,
Oliver Kieler,
Alexander Fernandez Scarioni,
Judith Felgner,
Abdulrahman Widaa,
Johannes Kohlmann,
Thomas Fordell,
Jaani Nissilä,
Antti Kemppinen,
Mark Bieler
Abstract:
We demonstrate a cryogenic electro-optic sampling (EOS) setup that allows for the measurement of microwave signals at arbitrary positions on a cryogenic chip-scale device. We use a Josephson Arbitrary Waveform Synthesizer (JAWS) to generate quantum-accurate voltage signals and measure them with the EOS setup, allowing for the calibration of its response, yielding traceability of the microwave meas…
▽ More
We demonstrate a cryogenic electro-optic sampling (EOS) setup that allows for the measurement of microwave signals at arbitrary positions on a cryogenic chip-scale device. We use a Josephson Arbitrary Waveform Synthesizer (JAWS) to generate quantum-accurate voltage signals and measure them with the EOS setup, allowing for the calibration of its response, yielding traceability of the microwave measurements to a quantum standard. We use the EOS setup to determine the time-domain response of ultrafast cryogenic photodiodes and the electrical reflection coefficient, i.e., the S11 scattering parameter, in a superconducting transmission line. Finally, we introduce an optical femtosecond pulse source which can be used to study the fidelity of superconducting transmission lines and terminations, as well as reflections from elements like Josephson junction arrays imbedded in them.
△ Less
Submitted 31 October, 2024;
originally announced November 2024.
-
Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions
Authors:
J. Hätinen,
A. Ronzani,
R. P. Loreto,
E. Mykkänen,
A. Kemppinen,
K. Viisanen,
T. Rantanen,
J. Geisor,
J. Lehtinen,
M. Ribeiro,
J-P. Kaikkonen,
O. Prakash,
V. Vesterinen,
W. Förbom,
E. T. Mannila,
M. Kervinen,
J. Govenius,
M. Prunnila
Abstract:
Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained…
▽ More
Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained a goal out of reach for several decades. We show efficient electronic refrigeration by Al-AlO$_x$-Nb superconducting tunnel junctions starting from bath temperatures above 2 K. The junctions can deliver electronic cooling power up to approximately mW/mm$^2$, which enables us to demonstrate tunnel-current-driven electron temperature reduction from 2.4 K to below 1.6 K (34% relative cooling) against the phonon bath. Our work shows that the key material of integrated superconducting circuits - niobium - enables powerful cryogenic refrigerator technology. This result is a prerequisite for practical cryogenic chip-scale refrigerators and, at the same time, it introduces a new electrothermal tool for quantum heat-transport experiments.
△ Less
Submitted 13 December, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
Effect of ion irradiation on superconducting thin films
Authors:
Katja Kohopää,
Alberto Ronzani,
Robab Najafi Jabdaraghi,
Arijit Bera,
Mário Ribeiro,
Dibyendu Hazra,
Jorden Senior,
Mika Prunnila,
Joonas Govenius,
Janne S. Lehtinen,
Antti Kemppinen
Abstract:
We demonstrate ion irradiation by argon or gallium as a wafer-scale post-processing method to increase disorder in superconducting thin films. We study several widely used superconductors, both single-elements and compounds. We show that ion irradiation increases normal-state resistivity in all our films, which is expected to enable tuning their superconducting properties, for example, toward high…
▽ More
We demonstrate ion irradiation by argon or gallium as a wafer-scale post-processing method to increase disorder in superconducting thin films. We study several widely used superconductors, both single-elements and compounds. We show that ion irradiation increases normal-state resistivity in all our films, which is expected to enable tuning their superconducting properties, for example, toward higher kinetic inductance. We observe an increase of superconducting transition temperature for Al and MoSi, and a decrease for Nb, NbN, and TiN. In MoSi, ion irradiation also improves the mixing of the two materials. We demonstrate fabrication of an amorphous and homogeneous film of MoSi with uniform thickness, which is promising, e.g., for superconducting nanowire single-photon detectors.
△ Less
Submitted 19 June, 2024; v1 submitted 20 March, 2023;
originally announced March 2023.
-
Thermal resistance in superconducting flip-chip assemblies
Authors:
Joel Hätinen,
Emma Mykkänen,
Klaara Viisanen,
Alberto Ronzani,
Antti Kemppinen,
Lassi Lehtisyrjä,
Janne S. Lehtinen,
Mika Prunnila
Abstract:
Cryogenic microsystems that utilize different 3D integration techniques are being actively developed, e.g., for the needs of quantum technologies. 3D integration can introduce opportunities and challenges to the thermal management of low temperature devices. In this work, we investigate sub-1 K inter-chip thermal resistance of a flip-chip bonded assembly, where two silicon chips are interconnected…
▽ More
Cryogenic microsystems that utilize different 3D integration techniques are being actively developed, e.g., for the needs of quantum technologies. 3D integration can introduce opportunities and challenges to the thermal management of low temperature devices. In this work, we investigate sub-1 K inter-chip thermal resistance of a flip-chip bonded assembly, where two silicon chips are interconnected by compression bonding via indium bumps. The total thermal contact area between the chips is 0.306 mm$^2$ and we find that the temperature dependence of the inter-chip thermal resistance follows the power law of $αT^{-3}$, with $α= 7.7-15.4$ K$^4$$μ$m$^2$/nW. The $T^{-3}$ relation indicates phononic interfacial thermal resistance, which is supported by the vanishing contribution of the electrons to the thermal conduction, due to the superconducting interconnections. Such a thermal resistance value can introduce a thermalization bottleneck in particular at cryogenic temperatures. This can be detrimental for some applications, yet it can also be harnessed. We provide an example of both cases by estimating the parasitic overheating of a cryogenic flip-chip assembly operated under various heat loads as well as simulate the performance of solid-state junction microrefrigerators utilizing the observed thermal isolation.
△ Less
Submitted 10 October, 2023; v1 submitted 2 March, 2023;
originally announced March 2023.
-
Phonon-blocked junction refrigerators for cryogenic quantum devices
Authors:
E. Mykkänen,
J. S. Lehtinen,
A. Ronzani,
A. Kemppinen,
A. Alkurdi,
P. -O. Chapuis,
M. Prunnila
Abstract:
Refrigeration is an important enabler for quantum technology. The very low energy of the fundamental excitations typically utilized in quantum technology devices and systems requires temperature well below 1 K. Expensive cryostats are utilized in reaching sub-1 K regime and solid-state cooling solutions would revolutionize the field. New electronic micro-coolers based on phonon-blocked semiconduct…
▽ More
Refrigeration is an important enabler for quantum technology. The very low energy of the fundamental excitations typically utilized in quantum technology devices and systems requires temperature well below 1 K. Expensive cryostats are utilized in reaching sub-1 K regime and solid-state cooling solutions would revolutionize the field. New electronic micro-coolers based on phonon-blocked semiconductor-superconductor junctions could provide a viable route to such miniaturization. Here, we investigate the performance limits of these junction refrigerators.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Supporting quantum technologies with an ultra-low loss silicon photonics platform
Authors:
Matteo Cherchi,
Arijit Bera,
Antti Kemppinen,
Jaani Nissilä,
Kirsi Tappura,
Marco Caputo,
Lauri Lehtimäki,
Janne Lehtinen,
Joonas Govenius,
Tomi Hassinen,
Mika Prunnila,
Timo Aalto
Abstract:
Photonic integrated circuits (PICs) are expected to play a significant role in the ongoing second quantum revolution, thanks to their stability and scalability. Still, major upgrades are needed for available PIC platforms to meet the demanding requirements of quantum devices. In this paper, we present a review of our recent progress in upgrading an unconventional silicon photonics platform towards…
▽ More
Photonic integrated circuits (PICs) are expected to play a significant role in the ongoing second quantum revolution, thanks to their stability and scalability. Still, major upgrades are needed for available PIC platforms to meet the demanding requirements of quantum devices. In this paper, we present a review of our recent progress in upgrading an unconventional silicon photonics platform towards such goal, including ultra-low propagation losses, low fibre coupling losses, integration of superconducting elements, Faraday rotators, fast and efficient detectors, as well as phase modulators with low loss and/or low energy consumption. We show the relevance of our developments and of our vision in two main applications: quantum key distribution - to achieve significantly higher key rates and large-scale deployment - and cryogenic quantum computers - to replace electrical connections to the cryostat with optical fibres.
△ Less
Submitted 15 February, 2023; v1 submitted 12 January, 2022;
originally announced January 2022.
-
Coulomb Blockade Thermometry on a Wide Temperature Range
Authors:
O. M. Hahtela,
A. Kemppinen,
J. Lehtinen,
A. J. Manninen,
E. Mykkänen,
M. Prunnila,
N. Yurttagül,
F. Blanchet,
M. Gramich,
B. Karimi,
E. T. Mannila,
J. Muhojoki,
J. T. Peltonen,
J. P. Pekola
Abstract:
The Coulomb Blockade Thermometer (CBT) is a primary thermometer for cryogenic temperatures, with demonstrated operation from below 1 mK up to 60 K. Its performance as a primary thermometer has been verified at temperatures from 20 mK to 200 mK at uncertainty level below 1 % (k = 2). In a new project, our aim is to extend the metrologically verified temperature range of the primary CBT up to 25 K.…
▽ More
The Coulomb Blockade Thermometer (CBT) is a primary thermometer for cryogenic temperatures, with demonstrated operation from below 1 mK up to 60 K. Its performance as a primary thermometer has been verified at temperatures from 20 mK to 200 mK at uncertainty level below 1 % (k = 2). In a new project, our aim is to extend the metrologically verified temperature range of the primary CBT up to 25 K. We also demonstrate close-to-ideal operation of a CBT with only two tunnel junctions when the device is embedded in a low-impedance environment.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
Cascaded superconducting junction refrigerators: optimization and performance limits
Authors:
A. Kemppinen,
A. Ronzani,
E. Mykkänen,
J. Hätinen,
J. S. Lehtinen,
M. Prunnila
Abstract:
We demonstrate highly transparent silicon-vanadium and silicon-aluminum tunnel junctions with relatively low sub-gap leakage current and discuss how a trade-off typically encountered between transparency and leakage affects their refrigeration performance. We theoretically investigate cascaded superconducting tunnel junction refrigerators with two or more refrigeration stages. In particular, we de…
▽ More
We demonstrate highly transparent silicon-vanadium and silicon-aluminum tunnel junctions with relatively low sub-gap leakage current and discuss how a trade-off typically encountered between transparency and leakage affects their refrigeration performance. We theoretically investigate cascaded superconducting tunnel junction refrigerators with two or more refrigeration stages. In particular, we develop an approximate method that takes into account self-heating effects but still allows us to optimize the cascade a single stage at a time. We design a cascade consisting of energy-efficient refrigeration stages, which makes cooling of, e.g., quantum devices from above 1 K to below 100 mK a realistic experimental target.
△ Less
Submitted 5 August, 2021; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Driving a low critical current Josephson junction array with a mode-locked laser
Authors:
J. Nissila,
T. Fordell,
K. Kohopaa,
E. Mykkanen,
P. Immonen,
R. N. Jabradaghi,
E. Bardalen,
O. Kieler,
B. Karlsen,
P. A. Ohlckers,
R. Behr,
A. J. Manninen,
J. Govenius,
A. Kemppinen
Abstract:
We demonstrate the operation of Josephson junction arrays (JJA) driven by optical pulses generated by a mode-locked laser and an optical time-division multiplexer. A commercial photodiode converts the optical pulses into electrical ones in liquid helium several cm from the JJA. The performance of our custom-made mode-locked laser is sufficient for driving a JJA with low critical current at multipl…
▽ More
We demonstrate the operation of Josephson junction arrays (JJA) driven by optical pulses generated by a mode-locked laser and an optical time-division multiplexer. A commercial photodiode converts the optical pulses into electrical ones in liquid helium several cm from the JJA. The performance of our custom-made mode-locked laser is sufficient for driving a JJA with low critical current at multiple Shapiro steps. Our optical approach is a potential enabler for fast and energy-efficient pulse drive without expensive high-bandwidth electrical pulse pattern generator, and without high-bandwidth electrical cabling crossing temperature stages. Our measurements and simulations motivate an improved integration of photodiodes and JJAs using, e.g., flip-chip techniques, in order to improve both the understanding and fidelity of pulse-driven Josephson Arbitrary Waveform Synthesizers (JAWS).
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Realisation of a quantum current standard at liquid helium temperature with sub-ppm reproducibility
Authors:
Stephen Giblin,
Emma Mykkänen,
Antti Kemppinen,
Pekka Immonen,
Antti Manninen,
Máté Jenei,
Mikko Möttönen,
Gento Yamahata,
Akira Fujiwara,
Masaya Kataoka
Abstract:
A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the…
▽ More
A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the pump drive signal is a sine wave. The combination of simple operating conditions with high accuracy demonstrates the possibility that an electron pump can operate as a current standard in a National Measurement Institute. We also discuss other practical aspects of using the electron pump as a current standard, such as testing its robustness to changes in the control parameters, and using a rapid tuning procedure to locate the optimal operation point..
△ Less
Submitted 23 January, 2020; v1 submitted 4 December, 2019;
originally announced December 2019.
-
Efficient thermionic operation and phonon isolation by a semiconductor-superconductor junction
Authors:
Emma Mykkänen,
Janne S. Lehtinen,
Leif Grönberg,
Andrey Shchepetov,
Andrey V. Timofeev,
David Gunnarsson,
Antti Kemppinen,
Antti J. Manninen,
Mika Prunnila
Abstract:
Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers an…
▽ More
Control of heat flux at small length scales is crucial for numerous solid-state devices and systems. In addition to the thermal management of information and communication devices the mastering of heat transfer channels down to the nanoscale also enable, e.g., new memory concepts, high sensitivity detectors and sensors, energy harvesters and compact solid-state refrigerators. Electronic coolers and thermal detectors for electromagnetic radiation, especially, rely on the maximization of electro-thermal response and blockade of phonon transport. In this work, we propose and demonstrate that efficient electro-thermal operation and phonon transfer blocking can be achieved in a single solid-state thermionic junction. Our experimental demonstration relies on suspended semiconductor-superconductor junctions where the electro-thermal response arises from the superconducting energy gap, and the phonon blocking naturally results from the transmission bottleneck at the junction. We suspend different size degenerately doped silicon chips (up to macroscopic scale) directly from the junctions and cool these by biasing the junctions. The electronic cooling operation characteristics are accompanied by measurement and analysis of the thermal resistance components in the structures indicating the operation principle of phonon blocking in the junctions.
△ Less
Submitted 9 September, 2018;
originally announced September 2018.
-
Superconducting MoSi nanowires
Authors:
J. S. Lehtinen,
A. Kemppinen,
E. Mykkänen,
M. Prunnila,
A. J. Manninen
Abstract:
We have fabricated disordered superconducting nanowires of molybdenium silicide. A molybdenium nanowire is first deposited on top of silicon, and the alloy is formed by rapid thermal annealing. The method allows tuning of the crystal growth to optimise, e.g., the resistivity of the alloy for potential applications in quantum phase slip devices and superconducting nanowire single-photon detectors.…
▽ More
We have fabricated disordered superconducting nanowires of molybdenium silicide. A molybdenium nanowire is first deposited on top of silicon, and the alloy is formed by rapid thermal annealing. The method allows tuning of the crystal growth to optimise, e.g., the resistivity of the alloy for potential applications in quantum phase slip devices and superconducting nanowire single-photon detectors. The wires have effective diameters from 42 to 79 nm, enabling the observation of crossover from conventional superconductivity to regimes affected by thermal and quantum fluctuations. In the smallest diameter wire and at temperatures well below the superconducting critical temperature, we observe residual resistance and negative magnetoresistance, which can be considered as fingerprints of quantum phase slips.
△ Less
Submitted 13 October, 2017; v1 submitted 22 August, 2017;
originally announced August 2017.
-
Characterising superconducting filters using residual microwave background
Authors:
J. S. Lehtinen,
E. Mykkänen,
A. Kemppinen,
D. Golubev,
S. V. Lotkhov,
A. J. Manninen
Abstract:
A normal metal - superconductor hybrid single-electron trap with tunable barrier is utilized as a tool for spectrum analysis at the extremely low signal levels, using only well filtered cryogenic microwave background as a photon source in the frequency range from about 50 to 210 GHz. We probe millimeter wave propagation in two superconducting systems: a Josephson junction array around its plasma f…
▽ More
A normal metal - superconductor hybrid single-electron trap with tunable barrier is utilized as a tool for spectrum analysis at the extremely low signal levels, using only well filtered cryogenic microwave background as a photon source in the frequency range from about 50 to 210 GHz. We probe millimeter wave propagation in two superconducting systems: a Josephson junction array around its plasma frequency, and a superconducting titanium film in the limit when the photon energies are larger than the superconducting energy gap. This regime is relevant for improving the performance of cryogenic quantum devices but is hard to access with conventional techniques. We show that relatively simple models can be used to describe the essential properties of the studied components.
△ Less
Submitted 27 February, 2017; v1 submitted 23 September, 2016;
originally announced September 2016.
-
Traceable Coulomb Blockade Thermometry
Authors:
Ossi Hahtela,
Emma Mykkanen,
Antti Kemppinen,
Matthias Meschke,
Mika Prunnila,
David Gunnarsson,
Leif Roschier,
Jari Penttila,
Jukka Pekola
Abstract:
We present a measurement and analysis scheme for determining traceable thermodynamic temperature at cryogenic temperatures using Coulomb blockade thermometry. The uncertainty of the electrical measurement is improved by utilizing two sampling digital voltmeters instead of the traditional lock-in technique. The remaining uncertainty is dominated by that of the numerical analysis of the measurement…
▽ More
We present a measurement and analysis scheme for determining traceable thermodynamic temperature at cryogenic temperatures using Coulomb blockade thermometry. The uncertainty of the electrical measurement is improved by utilizing two sampling digital voltmeters instead of the traditional lock-in technique. The remaining uncertainty is dominated by that of the numerical analysis of the measurement data. Two analysis methods are demonstrated: numerical fitting of the full conductance curve and measuring the height of the conductance dip. The complete uncertainty analysis shows that using either analysis method the relative combined standard uncertainty (k = 1) in determining the thermodynamic temperature in the temperature range from 20 mK to 200 mK is below 0.5 %. In this temperature range, both analysis methods produced temperature estimates that deviated from 0.39 % to 0.67 % from the reference temperatures provided by a superconducting reference point device calibrated against the Provisional Low Temperature Scale of 2000.
△ Less
Submitted 21 December, 2016; v1 submitted 22 September, 2016;
originally announced September 2016.
-
Reducing current noise in cryogenic experiments by vacuum-insulated cables
Authors:
E. Mykkänen,
J. S. Lehtinen,
A. Kemppinen,
C. Krause,
D. Drung,
J. Nissilä,
A. J. Manninen
Abstract:
We measure the current noise of several cryogenic cables in a pulse tube based dilution refrigerator at frequencies between about 1~mHz and 50~kHz. We show that vibration-induced noise can be efficiently suppressed by using vacuum-insulated cables between room temperature and the 2nd pulse tube stage. A noise peak below 4 fA at the 1.4~Hz operation frequency of the pulse tube, and a white noise de…
▽ More
We measure the current noise of several cryogenic cables in a pulse tube based dilution refrigerator at frequencies between about 1~mHz and 50~kHz. We show that vibration-induced noise can be efficiently suppressed by using vacuum-insulated cables between room temperature and the 2nd pulse tube stage. A noise peak below 4 fA at the 1.4~Hz operation frequency of the pulse tube, and a white noise density of 0.44 fA/\sqrt{Hz} in the millihertz range are obtained.
△ Less
Submitted 29 August, 2016; v1 submitted 13 April, 2016;
originally announced April 2016.
-
Accurate Coulomb Blockade Thermometry up to 60 Kelvin
Authors:
M. Meschke,
A. Kemppinen,
J. P. Pekola
Abstract:
We demonstrate experimentally a precise realization of Coulomb Blockade Thermometry (CBT) working at temperatures up to 60 K. Advances in nano fabrication methods using electron beam lithography allow us to fabricate a uniform arrays of sufficiently small tunnel junctions to guarantee an overall temperature reading uncertainty of about 1\%
We demonstrate experimentally a precise realization of Coulomb Blockade Thermometry (CBT) working at temperatures up to 60 K. Advances in nano fabrication methods using electron beam lithography allow us to fabricate a uniform arrays of sufficiently small tunnel junctions to guarantee an overall temperature reading uncertainty of about 1\%
△ Less
Submitted 20 July, 2015;
originally announced July 2015.
-
Single quasiparticle excitation dynamics on a superconducting island
Authors:
V. F. Maisi,
S. V. Lotkhov,
A. Kemppinen,
A. Heimes,
J. T. Muhonen,
J. P. Pekola
Abstract:
We investigate single quasiparticle excitation dynamics on a small superconducting aluminum island connected to normal metallic leads by tunnel junctions. We find the island to be free of excitations within the measurement resolution allowing us to determine Cooper pair breaking rate to be less than 3 kHz. By tuning the Coulomb energy of the island to have an odd number of electrons, one of them r…
▽ More
We investigate single quasiparticle excitation dynamics on a small superconducting aluminum island connected to normal metallic leads by tunnel junctions. We find the island to be free of excitations within the measurement resolution allowing us to determine Cooper pair breaking rate to be less than 3 kHz. By tuning the Coulomb energy of the island to have an odd number of electrons, one of them remains unpaired. We detect it by measuring its relaxation rate via tunneling. By injecting electrons with a periodic gate voltage, we probe electron-phonon interaction and relaxation down to a single quasiparticle excitation pair, with a measured recombination rate of 8 kHz. Our experiment yields a strong test of BCS-theory in aluminum as the results are consistent with it without free parameters.
△ Less
Submitted 22 January, 2013; v1 submitted 12 December, 2012;
originally announced December 2012.
-
Single-electron current sources: towards a refined definition of ampere
Authors:
J. P. Pekola,
O. -P. Saira,
V. F. Maisi,
A. Kemppinen,
M. Möttönen,
Yu. A. Pashkin,
D. V. Averin
Abstract:
Controlling electrons at the level of elementary charge $e$ has been demonstrated experimentally already in the 1980's. Ever since, producing an electrical current $ef$, or its integer multiple, at a drive frequency $f$ has been in a focus of research for metrological purposes. In this review we first discuss the generic physical phenomena and technical constraints that influence charge transport.…
▽ More
Controlling electrons at the level of elementary charge $e$ has been demonstrated experimentally already in the 1980's. Ever since, producing an electrical current $ef$, or its integer multiple, at a drive frequency $f$ has been in a focus of research for metrological purposes. In this review we first discuss the generic physical phenomena and technical constraints that influence charge transport. We then present the broad variety of proposed realizations. Some of them have already proven experimentally to nearly fulfill the demanding needs, in terms of transfer errors and transfer rate, of quantum metrology of electrical quantities, whereas some others are currently "just" wild ideas, still often potentially competitive if technical constraints can be lifted. We also discuss the important issues of read-out of single-electron events and potential error correction schemes based on them. Finally, we give an account of the status of single-electron current sources in the bigger framework of electric quantum standards and of the future international SI system of units, and briefly discuss the applications and uses of single-electron devices outside the metrological context.
△ Less
Submitted 1 September, 2012; v1 submitted 20 August, 2012;
originally announced August 2012.
-
Long hold times in a two-junction electron trap
Authors:
A. Kemppinen,
S. V. Lotkhov,
O. -P. Saira,
A. B. Zorin,
J. P. Pekola,
A. J. Manninen
Abstract:
The hold time $τ$ of a single-electron trap is shown to increase significantly due to suppression of environmentally assisted tunneling events. Using two rf-tight radiation shields instead of a single one, we demonstrate increase of $τ$ by a factor exceeding $10^3$, up to about 10 hours, for a trap with only two superconductor (S) -- normal-metal (N) tunnel junctions and an on-chip resistor $R$ (R…
▽ More
The hold time $τ$ of a single-electron trap is shown to increase significantly due to suppression of environmentally assisted tunneling events. Using two rf-tight radiation shields instead of a single one, we demonstrate increase of $τ$ by a factor exceeding $10^3$, up to about 10 hours, for a trap with only two superconductor (S) -- normal-metal (N) tunnel junctions and an on-chip resistor $R$ (R-SNS structure). In the normal state, the improved shielding made it possible to observe $τ\sim$ 100 s, which is in reasonable agreement with the quantum-leakage-limited level expected for the two-electron cotunneling process.
△ Less
Submitted 8 August, 2011;
originally announced August 2011.
-
Vanishing quasiparticle density in a hybrid Al/Cu/Al single-electron transistor
Authors:
O. -P. Saira,
A. Kemppinen,
V. F. Maisi,
J. P. Pekola
Abstract:
The achievable fidelity of many nanoelectronic devices based on superconducting aluminum is limited by either the density of residual nonequilibrium quasiparticles n_qp or the density of quasiparticle states in the gap, characterized by Dynes parameter γ. We infer upper bounds n_qp < 0.033 um^-3 and γ< 1.6*10^-7 from transport measurements performed on Al/AlOx/Cu single-electron transistors, impro…
▽ More
The achievable fidelity of many nanoelectronic devices based on superconducting aluminum is limited by either the density of residual nonequilibrium quasiparticles n_qp or the density of quasiparticle states in the gap, characterized by Dynes parameter γ. We infer upper bounds n_qp < 0.033 um^-3 and γ< 1.6*10^-7 from transport measurements performed on Al/AlOx/Cu single-electron transistors, improving previous results by an order of magnitude. Owing to efficient microwave shielding and quasiparticle relaxation, typical number of quasiparticles in the superconducting leads is zero.
△ Less
Submitted 4 January, 2012; v1 submitted 7 June, 2011;
originally announced June 2011.
-
Single-electron shuttle based on a silicon quantum dot
Authors:
K. W. Chan,
M. Mottonen,
A. Kemppinen,
N. S. Lai,
K. Y. Tan,
W. H. Lim,
A. S. Dzurak
Abstract:
We report on single-electron shuttling experiments with a silicon metal-oxide-semiconductor quantum dot at 300 mK. Our system consists of an accumulated electron layer at the Si/SiO_2 interface below an aluminum top gate with two additional barrier gates used to deplete the electron gas locally and to define a quantum dot. Directional single-electron shuttling from the source and to the drain lead…
▽ More
We report on single-electron shuttling experiments with a silicon metal-oxide-semiconductor quantum dot at 300 mK. Our system consists of an accumulated electron layer at the Si/SiO_2 interface below an aluminum top gate with two additional barrier gates used to deplete the electron gas locally and to define a quantum dot. Directional single-electron shuttling from the source and to the drain lead is achieved by applying a dc source-drain bias while driving the barrier gates with an ac voltage of frequency f_p. Current plateaus at integer levels of ef_p are observed up to f_p = 240 MHz operation frequencies. The observed results are explained by a sequential tunneling model which suggests that the electron gas may be heated substantially by the ac driving voltage.
△ Less
Submitted 5 October, 2011; v1 submitted 30 March, 2011;
originally announced March 2011.
-
Photon assisted tunneling as an origin of the Dynes density of states
Authors:
J. P. Pekola,
V. F. Maisi,
S. Kafanov,
N. Chekurov,
A. Kemppinen,
Yu. A. Pashkin,
O. -P. Saira,
M. Mottonen,
J. S. Tsai
Abstract:
We show that the effect of a high-temperature environment in current transport through a normal metal-insulator-superconductor tunnel junction can be described by an effective density of states (DOS) in the superconductor. In the limit of a resistive low-ohmic environment, this DOS reduces into the well-known Dynes form. Our theoretical result is supported by experiments in engineered environments…
▽ More
We show that the effect of a high-temperature environment in current transport through a normal metal-insulator-superconductor tunnel junction can be described by an effective density of states (DOS) in the superconductor. In the limit of a resistive low-ohmic environment, this DOS reduces into the well-known Dynes form. Our theoretical result is supported by experiments in engineered environments. We apply our findings to improve the performance of a single-electron turnstile, a potential candidate for a metrological current source.
△ Less
Submitted 6 August, 2010; v1 submitted 21 January, 2010;
originally announced January 2010.
-
Electronic Radio-Frequency Refrigerator
Authors:
S. Kafanov,
A. Kemppinen,
Yu. A. Pashkin,
M. Meschke,
J. S. Tsai,
J. P. Pekola
Abstract:
We demonstrate experimentally that a hybrid single-electron transistor with superconducting leads and a normal-metal island can be refrigerated by an alternating voltage applied to the gate electrode. The simultaneous measurement of the dc current induced by the rf gate through the device at a small bias voltage serves as an in-situ thermometer.
We demonstrate experimentally that a hybrid single-electron transistor with superconducting leads and a normal-metal island can be refrigerated by an alternating voltage applied to the gate electrode. The simultaneous measurement of the dc current induced by the rf gate through the device at a small bias voltage serves as an in-situ thermometer.
△ Less
Submitted 2 June, 2009;
originally announced June 2009.
-
Pumping properties of the hybrid single-electron transistor in dissipative environment
Authors:
S. V. Lotkhov,
A. Kemppinen,
S. Kafanov,
J. P. Pekola,
A. B. Zorin
Abstract:
Pumping characteristics were studied of the hybrid normal-metal/superconductor single-electron transistor embedded in a high-ohmic environment. Two 3 micrometer-long microstrip resistors of CrOx with a sum resistance R=80kOhm were placed adjacent to this hybrid device. Substantial improvement of pumping and reduction of the subgap leakage were observed in the low-MHz range. At higher frequencies…
▽ More
Pumping characteristics were studied of the hybrid normal-metal/superconductor single-electron transistor embedded in a high-ohmic environment. Two 3 micrometer-long microstrip resistors of CrOx with a sum resistance R=80kOhm were placed adjacent to this hybrid device. Substantial improvement of pumping and reduction of the subgap leakage were observed in the low-MHz range. At higher frequencies 0.1-1GHz, a slowdown of tunneling due to the enhanced damping and electron heating negatively affected the pumping, as compared to the reference bare devices.
△ Less
Submitted 20 May, 2009;
originally announced May 2009.
-
Experimental investigation of hybrid single-electron turnstiles with high charging energy
Authors:
A. Kemppinen,
S. Kafanov,
Yu. A. Pashkin,
J. S. Tsai,
D. V. Averin,
J. P. Pekola
Abstract:
We present an experimental study of hybrid turnstiles with high charging energies in comparison to the superconducting gap. The device is modeled with the sequential tunneling approximation. The backtunneling effect is shown to limit the amplitude of the gate drive and thereby the maximum pumped current of the turnstile. We compare results obtained with sine and square wave drive and show how a…
▽ More
We present an experimental study of hybrid turnstiles with high charging energies in comparison to the superconducting gap. The device is modeled with the sequential tunneling approximation. The backtunneling effect is shown to limit the amplitude of the gate drive and thereby the maximum pumped current of the turnstile. We compare results obtained with sine and square wave drive and show how a fast rise time can suppress errors due to leakage current. Quantized current plateaus up to 160 pA are demonstrated.
△ Less
Submitted 20 March, 2009;
originally announced March 2009.
-
Quantized current of a hybrid single-electron transistor with superconducting leads and a normal-metal island
Authors:
Antti Kemppinen,
Matthias Meschke,
Mikko Möttönen,
Dmitri V. Averin,
Jukka P. Pekola
Abstract:
We discuss the operation of the superconductor - insulator - normal-metal - insulator - superconductor (SINIS) turnstile. This voltage-biased hybrid single-electron transistor (SET) provides current quantization even with only one radio-frequency (rf) control parameter, namely the gate voltage of the single island. We give an overview of the main error mechanisms of the turnstile and consider it…
▽ More
We discuss the operation of the superconductor - insulator - normal-metal - insulator - superconductor (SINIS) turnstile. This voltage-biased hybrid single-electron transistor (SET) provides current quantization even with only one radio-frequency (rf) control parameter, namely the gate voltage of the single island. We give an overview of the main error mechanisms of the turnstile and consider its feasibility as a quantum current standard. We also present experimental results of pumping with the SINIS structure which show decreased leakage current compared to earlier measurements with the opposite NISIN structure.
△ Less
Submitted 29 May, 2009; v1 submitted 11 March, 2008;
originally announced March 2008.
-
Suppression of the critical current of a balanced SQUID
Authors:
Antti Kemppinen,
Antti J. Manninen,
Mikko Möttönen,
Juha J. Vartiainen,
Joonas T. Peltonen,
Jukka P. Pekola
Abstract:
We present an experimental study of the magnetic flux dependence of the critical current of a balanced SQUID with three Josephson junctions in parallel. Unlike for ordinary dc SQUIDs, the suppression of the critical current does not depend on the exact parameters of the Josephson junctions. The suppression is essentially limited only by the inductances of the SQUID loops. We demonstrate a critic…
▽ More
We present an experimental study of the magnetic flux dependence of the critical current of a balanced SQUID with three Josephson junctions in parallel. Unlike for ordinary dc SQUIDs, the suppression of the critical current does not depend on the exact parameters of the Josephson junctions. The suppression is essentially limited only by the inductances of the SQUID loops. We demonstrate a critical current suppression ratio of higher than 300 in a balanced SQUID with a maximum critical current 30 nA.
△ Less
Submitted 1 December, 2007;
originally announced December 2007.
-
Nanoampere pumping of Cooper pairs
Authors:
Juha J. Vartiainen,
Mikko Mottonen,
Jukka Pekola,
Antti Kemppinen
Abstract:
We have employed a tunable Cooper-pair transistor, the sluice, with radio frequency control to pump current over a resistive circuit. We find that the charge transferred per pumping cycle can be controlled with the resolution of a single Cooper-pair up to hundreds of pairs. The achieved nanoampere current features more than an order of magnitude improvement over the previously reported results a…
▽ More
We have employed a tunable Cooper-pair transistor, the sluice, with radio frequency control to pump current over a resistive circuit. We find that the charge transferred per pumping cycle can be controlled with the resolution of a single Cooper-pair up to hundreds of pairs. The achieved nanoampere current features more than an order of magnitude improvement over the previously reported results and it is close to the theoretical maximum value for the measured sample.
△ Less
Submitted 21 December, 2006;
originally announced December 2006.
