Showing 1–19 of 19 results for author: Kelner, J M

Channel impulse response peak clustering using neural networks

Authors: Petr Horky, Ales Prokes, Radek Zavorka, Josef Vychodil, Jan M. Kelner, Cezary Ziolkowski, Aniruddha Chandra

Abstract: This paper introduces an approach to process channel sounder data acquired from Channel Impulse Response (CIR) of 60GHz and 80GHz channel sounder systems, through the integration of Long Short-Term Memory (LSTM) Neural Network (NN) and Fully Connected Neural Network (FCNN). The primary goal is to enhance and automate cluster detection within peaks from noised CIR data. The study initially compares… ▽ More This paper introduces an approach to process channel sounder data acquired from Channel Impulse Response (CIR) of 60GHz and 80GHz channel sounder systems, through the integration of Long Short-Term Memory (LSTM) Neural Network (NN) and Fully Connected Neural Network (FCNN). The primary goal is to enhance and automate cluster detection within peaks from noised CIR data. The study initially compares the performance of LSTM NN and FCNN across different input sequence lengths. Notably, LSTM surpasses FCNN due to its incorporation of memory cells, which prove beneficial for handling longer series.Additionally, the paper investigates the robustness of LSTM NN through various architectural configurations. The findings suggest that robust neural networks tend to closely mimic the input function, whereas smaller neural networks are better at generalizing trends in time series data, which is desirable for anomaly detection, where function peaks are regarded as anomalies.Finally, the selected LSTM NN is compared with traditional signal filters, including Butterworth, Savitzky-Golay, Bessel/Thomson, and median filters. Visual observations indicate that the most effective methods for peak detection within channel impulse response data are either the LSTM NN or median filter, as they yield similar results. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: 7 pages, 10 figures, 5 tables

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2023 6th International Conference on Advanced Communication Technologies and Networking (CommNet), Rabat, Morocco, 11-13 Dec. 2023, pp. 1-7

Comparative analysis of clustering methods for power delay profile in MMW bands and in-vehicle scenarios

Authors: Radek Zavorka, Ales Prokes, Josef Vychodil, Tomas Mikulasek, Petr Horky, Aniruddha Chandra, Christoph Mecklenbrauker, Jan M. Kelner, Cezary Ziolkowski

Abstract: The spatial statistics of radio wave propagation in specific environments and scenarios, as well as being able to recognize important signal components, are prerequisites for dependable connectivity. There are several reasons why in-vehicle communication is unique, including safety considerations and vehicle-to-vehicle/infrastructure communication.The paper examines the characteristics of clusteri… ▽ More The spatial statistics of radio wave propagation in specific environments and scenarios, as well as being able to recognize important signal components, are prerequisites for dependable connectivity. There are several reasons why in-vehicle communication is unique, including safety considerations and vehicle-to-vehicle/infrastructure communication.The paper examines the characteristics of clustering power delay profiles to investigate in-vehicle communication. It has been demonstrated that the Saleh-Valenzuela channel model can also be adapted for in-vehicle communication, and that the signal is received in clusters with exponential decay. A measurement campaign was conducted, capturing the power delay profile inside the vehicle cabin, and the reweighted l1 minimization method was compared with the traditional k-means clustering techniques. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: 6 pages, 10 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2023 IEEE Conference on Antenna Measurements and Applications (CAMA), Genoa, Italy, 15-17 Nov. 2023, pp. 260-265

Long-term channel analysis at 60 and 80 GHz for autonomous ground vehicles

Authors: Radek Zavorka, Tomas Mikulasek, Josef Vychodil, Jiri Blumenstein, Hussein Hammoud, Jaroslaw Wojtun, Aniruddha Chandra, Jan M. Kelner, Cezary Ziolkowski, Ales Prokes

Abstract: This paper presents a comprehensive measurement campaign aimed at evaluating indoor-to-indoor radio channels in dynamic scenarios, with a particular focus on applications such as autonomous ground vehicles (AGV). These scenarios are characterized by the height of the antennas, addressing the unique challenges of near-ground communication. Our study involves long-term measurements (20 minutes of co… ▽ More This paper presents a comprehensive measurement campaign aimed at evaluating indoor-to-indoor radio channels in dynamic scenarios, with a particular focus on applications such as autonomous ground vehicles (AGV). These scenarios are characterized by the height of the antennas, addressing the unique challenges of near-ground communication. Our study involves long-term measurements (20 minutes of continuous recording per measurement) of the channel impulse response (CIR) in the 60 GHz and 80 GHz frequency bands, each with a bandwidth of 2.048 GHz. We investigate the variations in channel characteristics, focusing on parameters such as root mean square (RMS) delay spread and the Rician factor. △ Less

Submitted 24 March, 2025; originally announced March 2025.

Comments: 6 pages, 9 figures, 2 tables

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: 2024 IEEE Conference on Antenna Measurements and Applications (CAMA), Da Nang, Vietnam, 9-11 October 2024

Vehicle to vehicle path loss modeling at millimeter wave band for crossing cars

Authors: Anirban Ghosh, Aniruddha Chandra, Tomas Mikulasek, Ales Prokes, Jaroslaw Wojtun, Jan M. Kelner, Cezary Ziolkowski

Abstract: Fifth generation (5G) new radio is now offering sidelink capability, which allows direct vehicle-to-vehicle (V2V) communication. Millimeter wave (mmWave) enables low-latency mission-critical V2V communications, such as forward crash warning, between two vehicles crossing on a road without dividers. In this article, we present a measurement-based path loss (PL) model for V2V links operating at 59.6… ▽ More Fifth generation (5G) new radio is now offering sidelink capability, which allows direct vehicle-to-vehicle (V2V) communication. Millimeter wave (mmWave) enables low-latency mission-critical V2V communications, such as forward crash warning, between two vehicles crossing on a road without dividers. In this article, we present a measurement-based path loss (PL) model for V2V links operating at 59.6 GHz mmWave when two vehicles approach from opposite sides and cross each other. Our model outperforms other existing PL models and can reliably model both approaching and departing vehicle scenarios. △ Less

Submitted 24 March, 2025; originally announced March 2025.

Comments: 5 pages, 4 figures, 2 tables

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: IEEE Antennas and Wireless Propagation Letters, manuscript, vol. 22, no. 9, pp. 2125-2129, Sep. 2023

Channel modeling for 60 GHz fixed mmWave O2I and O2O uplink with angular misalignment

Authors: Nitisha Singh, Sahaj K. Jha, Aniruddha Chandra, Radek Zavorka, Petr Horky, Tomas Mikulasek, Jiri Blumenstein, Ales Prokes, Jaroslaw Wojtun, Jan M. Kelner, Cezary Ziolkowski

Abstract: In this letter, we examine the effect of misalignment angle on cluster-based power delay profile (PDP) modeling for a 60 GHz millimeter-wave uplink. The analysis uses real-world data, where fixed uplink scenarios are realized by placing the transmitter at ground level and the receiver at the building level. Both outdoor-to-indoor (O2I) and outdoor-to-outdoor (O2O) scenarios are studied. Using the… ▽ More In this letter, we examine the effect of misalignment angle on cluster-based power delay profile (PDP) modeling for a 60 GHz millimeter-wave uplink. The analysis uses real-world data, where fixed uplink scenarios are realized by placing the transmitter at ground level and the receiver at the building level. Both outdoor-to-indoor (O2I) and outdoor-to-outdoor (O2O) scenarios are studied. Using the misalignment angle and the scenario as inputs, we propose a statistical PDP simulation algorithm based on the Saleh-Valenzuela model. Different goodness-of-fit metrics reveal that our proposed algorithm is robust to both O2I and O2O scenarios and can approximate the PDPs fairly well, even in case of misalignment. △ Less

Submitted 24 March, 2025; originally announced March 2025.

Comments: 5 pages, 4 figures, 4 tables

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: IEEE Antennas and Wireless Propagation Letters, manuscript, vol. 23, no. 5, pp. 1653-1657, May 2024

Synthesis of omnidirectional path loss model based on directional model and multi-elliptical geometry

Authors: Jaroslaw Wojtun, Cezary Ziolkowski, Jan M. Kelner, Tomas Mikulasek, Radek Zavorka, Jiri Blumenstein, Ales Prokes, Aniruddha Chandra, Niraj Narayan, Anirban Ghosh

Abstract: Millimeter wave (mmWave) technology offers high throughput but has a limited radio range, necessitating the use of directional antennas or beamforming systems such as massive MIMO. Path loss (PL) models using narrow-beam antennas are known as directional models, while those using omnidirectional antennas are referred to as omnidirectional models. To standardize the analysis, omnidirectional PL mod… ▽ More Millimeter wave (mmWave) technology offers high throughput but has a limited radio range, necessitating the use of directional antennas or beamforming systems such as massive MIMO. Path loss (PL) models using narrow-beam antennas are known as directional models, while those using omnidirectional antennas are referred to as omnidirectional models. To standardize the analysis, omnidirectional PL models for mmWave ranges have been introduced, including TR 38.901 by 3GPP, which is based on measurements from directional antennas. However, synthesizing these measurements can be complex and time-consuming. This study proposes a numerical approach to derive an omnidirectional model from directional data using multi-elliptical geometry. We assessed the effectiveness of this method against existing PL models for mmWaves that are available in the literature. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Comments: 5 pages, 5 figures, 2 tables, 1 algorithm, 10 equations

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: 2025 19th European Conference on Antennas and Propagation (EuCAP), Stockholm, Sweden, 30 Mar.-4 Apr. 2025, pp. 1-5

Variability of radio signal attenuation by single deciduous tree versus reception angle at 80 GHz

Authors: Jaroslaw Wojtun, Cezary Ziolkowski, Jan M. Kelner, Tomas Mikulasek, Radek Zavorka, Jiri Blumenstein, Alea Prokes, Aniruddha Chandra, Niraj Narayan, Anirban Ghosh

Abstract: Vegetation significantly affects radio signal attenuation, influenced by factors such as signal frequency, plant species, and foliage density. Existing attenuation models typically address specific scenarios, like single trees, rows of trees, or green spaces, with the ITU-R P.833 recommendation being a widely recognized standard. Most assessments for single trees focus on the primary radiation dir… ▽ More Vegetation significantly affects radio signal attenuation, influenced by factors such as signal frequency, plant species, and foliage density. Existing attenuation models typically address specific scenarios, like single trees, rows of trees, or green spaces, with the ITU-R P.833 recommendation being a widely recognized standard. Most assessments for single trees focus on the primary radiation direction of the transmitting antenna. This paper introduces a novel approach to evaluating radio signal scattering by a single deciduous tree. Through measurements at 80 GHz and a bandwidth of approximately 2 GHz, we analyze how total signal attenuation varies with the reception angle relative to the transmitter-tree axis. The findings from various directional measurements contribute to a comprehensive attenuation model applicable to any reception angle and also highlight the impact of bandwidth on the received signal level. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Comments: 5 pages, 5 figures, 1 table, 7 equations; 2025 19th European Conference on Antennas and Propagation (EuCAP), Stockholm, Sweden, 30 Mar.-4 Apr. 2025

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: 2025 19th European Conference on Antennas and Propagation (EuCAP), Stockholm, Sweden, 30 Mar.-4 Apr. 2025, pp. 1-5

Power angular spectrum versus Doppler spectrum -- Measurements and analysis

Authors: Jan M. Kelner, Cezary Ziolkowski, Michal Kryk, Jaroslaw Wojtun, Leszek Nowosielski, Rafal Przesmycki, Marek Bugaj, Aniruddha Chandra, Rajeev Shukla, Anirban Ghosh, Ales Prokes, Tomas Mikulasek

Abstract: In this paper, we present an empirical verification of the method of determining the Doppler spectrum (DS) from the power angular spectrum (PAS). Measurements were made for the frequency of 3.5 GHz, under non-line-of-sight conditions in suburban areas characteristic of a university campus. In the static scenario, the measured PAS was the basis for the determination of DSs, which were compared with… ▽ More In this paper, we present an empirical verification of the method of determining the Doppler spectrum (DS) from the power angular spectrum (PAS). Measurements were made for the frequency of 3.5 GHz, under non-line-of-sight conditions in suburban areas characteristic of a university campus. In the static scenario, the measured PAS was the basis for the determination of DSs, which were compared with the DSs measured in the mobile scenario. The obtained results show that the proposed method gives some approximation to DS determined with the classic methods used so far. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Comments: 5 pages, 7 figures, 1 table, 8 equations; 2023 17th European Conference on Antennas and Propagation (EuCAP), Florence, Italy, 26-31 Mar. 2023

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: 2023 17th European Conference on Antennas and Propagation (EuCAP), Florence, Italy, 26-31 Mar. 2023, pp. 1-5

Spectral efficiency for mmWave downlink with beam misalignment in urban macro scenario

Authors: Jaroslaw Wojtun, Cezary Ziolkowski, Jan M. Kelner, Aniruddha Chandra, Rajeev Shukla, Anirban Ghosh, Ales Prokes, Tomas Mikulasek, Radek Zavorka, Petr Horky

Abstract: In this paper, we analyze the spectral efficiency for millimeter wave downlink with beam misalignment in urban macro scenario. For this purpose, we use a new approach based on the modified Shannon formula, which considers the propagation environment and antenna system coefficients. These factors are determined based on a multi-ellipsoidal propagation model. The obtained results show that under non… ▽ More In this paper, we analyze the spectral efficiency for millimeter wave downlink with beam misalignment in urban macro scenario. For this purpose, we use a new approach based on the modified Shannon formula, which considers the propagation environment and antenna system coefficients. These factors are determined based on a multi-ellipsoidal propagation model. The obtained results show that under non-line-of-sight conditions, the appropriate selection of the antenna beam orientation may increase the spectral efficiency in relation to the direct line to a user. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Comments: 4 pages, 6 figures, 4 equations; 2024 4th URSI Atlantic Radio Science Meeting (ATRASC), Meloneras, Spain, 19-24 May 2024

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: 2024 4th URSI Atlantic Radio Science Meeting (ATRASC), Meloneras, Spain, 19-24 May 2024, pp. 1-4

Cooperative system of emission source localization based on SDF

Authors: Jan M. Kelner

Abstract: Efficient and precise location of emission sources in an urbanized environment is very important in electronic warfare. Therefore, unmanned aerial vehicles (UAVs) are increasingly used for such tasks. In this paper, we present the cooperation of several UAVs creating a wireless sensor network (WSN) that locates the emission source. In the proposed WSN, the location is based on spectrum sensing and… ▽ More Efficient and precise location of emission sources in an urbanized environment is very important in electronic warfare. Therefore, unmanned aerial vehicles (UAVs) are increasingly used for such tasks. In this paper, we present the cooperation of several UAVs creating a wireless sensor network (WSN) that locates the emission source. In the proposed WSN, the location is based on spectrum sensing and the signal Doppler frequency method. The paper presents the concept of the system. Simulation studies are used to assess the efficiency of the cooperative WSN. In this case, the location effectiveness for the WSN is compared to the single UAV. △ Less

Submitted 1 May, 2018; originally announced May 2018.

Comments: 6 pages, 6 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 19th International Conference on Military Communications and Information Systems (ICMCIS), Warsaw, Poland, 22-23 May. 2018, pp. 1-6

BER measurements in the evaluation of operation correctness of VSAT modem traffic interfaces

Authors: Jan M. Kelner, Bogdan Uljasz, Leszek Nowosielski

Abstract: This paper presents using bit error rate (BER) measurements to evaluate operation correctness of traffic (input-output) interfaces in modem of very small aperture terminal (VSAT). Such functional tests are carried out, for example, when purchasing communication equipment for armed forces. Generally, available standards do not describe measurement procedures in this area. In this case, accredited l… ▽ More This paper presents using bit error rate (BER) measurements to evaluate operation correctness of traffic (input-output) interfaces in modem of very small aperture terminal (VSAT). Such functional tests are carried out, for example, when purchasing communication equipment for armed forces. Generally, available standards do not describe measurement procedures in this area. In this case, accredited laboratories should develop dedicated assessment methodologies. In this paper, we show the methodology for the VSAT modems, which is based on the BER measurements. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 5 pages, 5 figures, 2 tables

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 14th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering (TCSET), Lviv-Slavske, Ukraine, 20-24 Feb. 2018, pp. 36-40

Correlation properties of signal at mobile receiver for different propagation environments

Authors: Cezary Ziolkowski, Jan M. Kelner, Leszek Nowosielski

Abstract: An issue of the parameter selection in various branches of a multi-antenna receiver system determines its effectiveness. A significant effect on these parameters are correlation properties of received signals. In this paper, the assessment of the signal correlation properties for different environmental conditions is presented. The obtained results showed that depending on the receiver speed, the… ▽ More An issue of the parameter selection in various branches of a multi-antenna receiver system determines its effectiveness. A significant effect on these parameters are correlation properties of received signals. In this paper, the assessment of the signal correlation properties for different environmental conditions is presented. The obtained results showed that depending on the receiver speed, the adaptive selection of the delays in the different RAKE receiver branches provide minimization of the correlation between the signals. Particularly low levels of the signal correlation could be obtained in complex propagation environments such as urban and bad urban. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 4 pages, 5 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 14th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering (TCSET), Lviv-Slavske, Ukraine, 20-24 Feb. 2018, pp. 1024-1027

Modeling power angle spectrum and antenna pattern directions in multipath propagation environment

Authors: Jan M. Kelner, Cezary Ziolkowski

Abstract: Most propagation models do not consider the influence of antenna patterns on the parameters and characteristics of received signals. This assumption is equivalent to the use of isotropic or omnidirectional antennas in these models. Empirical measurement results indicate that the radiation pattern, gain and direction of directional antennas significantly influence on properties of the received sign… ▽ More Most propagation models do not consider the influence of antenna patterns on the parameters and characteristics of received signals. This assumption is equivalent to the use of isotropic or omnidirectional antennas in these models. Empirical measurement results indicate that the radiation pattern, gain and direction of directional antennas significantly influence on properties of the received signal. This fact shows that consideration the directional antennas in propagation models is very important especially in the context of emerging telecommunication technologies such as beamforming or massive MIMO. The purpose of this paper is to present the modeling method of power angular spectrum and direction of antenna patterns in a multipath propagation environment. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 5 pages, 7 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 12th European Conference on Antennas and Propagation (EuCAP), London, UK, 9-13 Apr. 2018, pp. 1-5

Path loss model modification for various gains and directions of antennas

Authors: Jan M. Kelner, Cezary Ziolkowski

Abstract: Emerging telecommunication technologies like 5G, green communications, and massive MIMO contribute to the use of directional antennas and beamforming. For this reason, modern propagation models should consider directional antennas with different beam widths, gains and radiation pattern directions. Most of the available propagation models are based on omnidirectional or isotropic antennas. A propos… ▽ More Emerging telecommunication technologies like 5G, green communications, and massive MIMO contribute to the use of directional antennas and beamforming. For this reason, modern propagation models should consider directional antennas with different beam widths, gains and radiation pattern directions. Most of the available propagation models are based on omnidirectional or isotropic antennas. A proposition to solve this problem is an empirical path loss model that considers the different types of antennas. This model assumes that the transmitting and receiving antenna beams are directing each other. In this paper, we propose modifying this model by determining attenuation for any direction of the antenna patterns. For this aim, the multi-elliptic channel model is used. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 4 pages, 7 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 12th European Conference on Antennas and Propagation (EuCAP), London, UK, 9-13 Apr. 2018, pp. 1-4

Evaluation of angular dispersion for various propagation environments in emerging 5G systems

Authors: Jan M. Kelner, Cezary Ziolkowski, Bogdan Uljasz

Abstract: Angular dispersion is the effect of a multi-path propagation observed in received signals. An assessment of this phenomenon is particularly important from the viewpoint of emerging fifth generation (5G) communication systems. In these systems, using the beam-forming and massive multiple-input multiple-output antenna arrays are planned. This phenomenon also has a negative impact on direction findin… ▽ More Angular dispersion is the effect of a multi-path propagation observed in received signals. An assessment of this phenomenon is particularly important from the viewpoint of emerging fifth generation (5G) communication systems. In these systems, using the beam-forming and massive multiple-input multiple-output antenna arrays are planned. This phenomenon also has a negative impact on direction finding and older generation communication systems used in an urban environment. In this paper, we present the angular dispersion evaluation for various propagation environments based on simulation studies. This analysis is carried out for different environment types defined in the 3GPP standard model for a selected frequency. In this case, the angular spread is determinated based on the power angular spectrum. This parameter is the basis for the influence evaluation of the propagation environment on the received signal angular dispersion. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 5 pages, 10 figures, 3 tables

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 22nd International Microwave and Radar Conference (MIKON), Poznan, Poland, 14-17 May 2018, pp. 637-641

Comparison of angular spread for 6 and 60 GHz based on 3GPP standard

Authors: Jan M. Kelner, Cezary Ziolkowski, Bogdan Uljasz

Abstract: In an urban environment, a multipath propagation is one of the basic phenomena affecting a quality of received signals. This causes dispersions in time and angular domains. Basic parameters describing these dispersions are the rms delay spread and rms angle spread, respectively. The delay spread is related to a frequency of the transmitted signal and the nature of the propagation environment. In t… ▽ More In an urban environment, a multipath propagation is one of the basic phenomena affecting a quality of received signals. This causes dispersions in time and angular domains. Basic parameters describing these dispersions are the rms delay spread and rms angle spread, respectively. The delay spread is related to a frequency of the transmitted signal and the nature of the propagation environment. In this paper, we show a mutual relationship between the time and angular dispersions in the received signal. The obtained simulation results present a comparison of the described dispersions for two different frequencies. In this case, the multi-elliptical propagation model and standard model developed by 3GPP are the basis for the simulation analysis of new communication system solutions. △ Less

Submitted 26 March, 2018; originally announced March 2018.

Comments: 5 pages, 8 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2018 22nd International Microwave and Radar Conference (MIKON), Poznan, Poland, 14-17 May 2018, pp. 286-290

Modeling the distribution of the arrival angle based on transmitter antenna pattern

Authors: Cezary Ziolkowski, Jan M. Kelner, Leszek Nowosielski, Marian Wnuk

Abstract: An angular distribution of received signals has a significant impact on their spectral and correlational properties. Most of angular dispersion models do not consider antenna patterns. The developed procedure for determining the propagation path parameters enables a wide range of assessment of the impact of the propagation environment on the received signal properties. In contrast to the other mod… ▽ More An angular distribution of received signals has a significant impact on their spectral and correlational properties. Most of angular dispersion models do not consider antenna patterns. The developed procedure for determining the propagation path parameters enables a wide range of assessment of the impact of the propagation environment on the received signal properties. In contrast to the other models, this procedure is based on a geometrical structure, which parameters are defined on the basis of power delay profile or spectrum This modeling method allows also the power radiation pattern (PRP) of the transmitting antenna. The aim of the paper is to present the influence of the transmitter antenna PRP on the scattering propagation paths that arrive at the receiver. This analysis is realized on the basis of simulations studies using the developed procedure. Presented in this paper procedure maps the effects of propagation phenomena that predominate in an azimuth plane. △ Less

Submitted 26 March, 2018; v1 submitted 21 March, 2018; originally announced March 2018.

Comments: 5 pages, 8 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: Proceedings of the 2017 11th European Conference on Antennas and Propagation (EuCAP), Paris, France, 19-24 Mar. 2017, pp. 1582-1586

Statistical evaluation of the azimuth and elevation angles seen at the output of the receiving antenna

Authors: Cezary Ziolkowski, Jan M. Kelner

Abstract: A method to evaluate the statistical properties of the reception angle seen at the input receiver that considers the receiving antenna pattern is presented. In particular, the impact of the direction and beamwidth of the antenna pattern on distribution of the reception angle is shown on the basis of 3D simulation studies. The obtained results show significant differences between distributions of a… ▽ More A method to evaluate the statistical properties of the reception angle seen at the input receiver that considers the receiving antenna pattern is presented. In particular, the impact of the direction and beamwidth of the antenna pattern on distribution of the reception angle is shown on the basis of 3D simulation studies. The obtained results show significant differences between distributions of angle of arrival and angle of reception. This means that the presented new method allows assessing the impact of the receiving antenna pattern on the correlation and spectral characteristics at the receiver input in simulation studies of wireless channel. The use of this method also provides an opportunity for analysis of a co-existence between small cells and wireless backhaul, what is currently a significant problem in designing 5G networks. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Comments: 6 pages, 7 figures

MSC Class: 94A40; 94A05; 94A12; 94A17 ACM Class: E.4; H.4.3

Journal ref: IEEE Transactions on Antennas and Propagation, vol. 66, no. 4, pp. 2165-2169, Apr. 2018

Radio bearing of sources with directional antennas in urban environment

Authors: Cezary Ziolkowski, Jan M. Kelner

Abstract: This paper focuses on assessing the limitations in the direction-finding process of radio sources with directional antennas in an urbanized environment, demonstrating how signal source antenna parameters, such as beamwidth and maximum radiation direction affect bearing accuracy in non-line-of-sight (NLOS) conditions. These evaluations are based on simulation studies, which use measurement-tested s… ▽ More This paper focuses on assessing the limitations in the direction-finding process of radio sources with directional antennas in an urbanized environment, demonstrating how signal source antenna parameters, such as beamwidth and maximum radiation direction affect bearing accuracy in non-line-of-sight (NLOS) conditions. These evaluations are based on simulation studies, which use measurement-tested signal processing procedures. These procedures are based on a multi-elliptical propagation model, the geometry of which is related to the environment by the power delay profile or spectrum. The probability density function of the angle of arrival for different parameters of the transmitting antenna is the simulation result. This characteristic allows assessing the effect of the signal source antenna parameters on bearing error. The obtained results are the basis for practical correction bearing error and these show the possibility of improving the efficiency of the radio source location in the urbanized environment. △ Less

Submitted 19 March, 2018; originally announced March 2018.

Comments: 24 pages, 16 figures, 3 tables; Accepted in International Journal of Microwave and Wireless Technologies (from Cambridge University Press)

MSC Class: 94A40; 94A05; 94A12; 94A17; ACM Class: E.4; H.4.3

Journal ref: International Journal of Microwave and Wireless Technologies, vol. 10, no. 7, pp. 759-771, Sep. 2018