-
Exploring polarization and geometry in the X-ray pulsar 4U 1538-52
Authors:
Vladislav Loktev,
Sofia V. Forsblom,
Sergey S. Tsygankov,
Juri Poutanen,
Alexander A. Mushtukov,
Alessandro Di Marco,
Jeremy Heyl,
Ruth M. E. Kelly,
Fabio La Monaca,
Mason Ng,
Swati Ravi,
Alexander Salganik,
Andrea Santangelo,
Valery F. Suleimanov,
Silvia Zane
Abstract:
The Imaging X-ray Polarimetry Explorer (IXPE) observations of accreting X-ray pulsars (XRPs) continue to provide novel insights into the physics and geometry of these sources. We present the first X-ray polarimetric study of the persistent wind-fed XRP 4U 1538-52, based on five IXPE observations totaling 360 ks, conducted in March and October 2024. We detect marginally significant polarization in…
▽ More
The Imaging X-ray Polarimetry Explorer (IXPE) observations of accreting X-ray pulsars (XRPs) continue to provide novel insights into the physics and geometry of these sources. We present the first X-ray polarimetric study of the persistent wind-fed XRP 4U 1538-52, based on five IXPE observations totaling 360 ks, conducted in March and October 2024. We detect marginally significant polarization in the combined data set in the full 2--8 keV energy band, with a polarization degree (PD) of 3.0+-1.1% and polarization angle (PA) of -18 degrees. The energy-resolved analysis shows a clear energy dependence of the polarization properties, with a remarkable ~70 degrees switch in PA between low and high energies. Similarly, the pulse phase-resolved spectro-polarimetric analysis reveals different signatures at low and high energies. At low (2--3 keV) energies, the PD ranges between ~2% and ~18%, with the PA varying between -16 and 70 degrees. At higher (4--8 keV) energies, the PD varies between ~3% and ~12%, with a drastically different PA behavior. Fitting the rotating vector model to the pulse phase dependence of the PA at the lower energies, we constrain the geometric configuration of the pulsar. The analysis favors a high spin-axis inclination of >50 which agrees with both previous pulse-phase-dependent spectral fitting of the cyclotron line region and the known high orbital inclination of the binary system. The magnetic obliquity is estimated to be 30 degrees and the spin position angle to be 19 degrees. A sharp switch in PA around 3 keV presents a particular theoretical challenge, as it is not consistent with the right-angle switch that was only seen in one other pulsar Vela X-1.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
Exploring the Future of Soft X-ray Polarimetry: the Capabilities of the REDSoX Instrument for XDINS and Magnetar Studies
Authors:
Ruth M. E. Kelly,
Herman L. Marshall,
Silvia Zane,
Nabil Brice,
Swati Ravi,
Roberto Turolla,
Roberto Taverna,
Denis González-Caniulef
Abstract:
X-ray polarimetry offers a unique window into neutron star physics and can provide answers to questions that cannot otherwise be probed. The up-and-coming REDSoX sounding rocket mission will be the first experiment equipped with a detector able to explore polarized X-rays below 1 keV, observing in the 0.2-0.4 keV range. Although REDSoX will only be capable of short, one-off observations, it will c…
▽ More
X-ray polarimetry offers a unique window into neutron star physics and can provide answers to questions that cannot otherwise be probed. The up-and-coming REDSoX sounding rocket mission will be the first experiment equipped with a detector able to explore polarized X-rays below 1 keV, observing in the 0.2-0.4 keV range. Although REDSoX will only be capable of short, one-off observations, it will crucially test the instrument performance. In this paper we investigate how a fully-fledged orbital mission with longer lifetime, based on an instrument design similar to REDSoX, will allow us to study thermal emission from the X-ray dim isolated neutron stars (XDINSs) and magnetars, probing their magnetic field and the physics of their outer surface layers, including vacuum effects and QED mode conversion at the vacuum resonance. We discuss the potentially observable features for promising values of the star's surface temperature, magnetic field, and viewing geometry. Assuming emission from the whole surface, we find that, for a source with a magnetic field B=5x10^{13} G and surface temperature T~10^7 K, the instrument can resolve a proton-cyclotron absorption feature in the spectrum with high significance when collecting ~25,000 counts across a single observation. Similarly, for a source with B=10^{14} G and T~10^7 K, a switch in the dominant polarization mode, caused by mode conversion at the vacuum resonance, can be detected by collecting ~25,000 counts, allowing for a long-sought observational test of the presence of QED effects. We then present two case studies for XDINS targets: RX J1856.5-3754 and RX J0720.4-3125.
△ Less
Submitted 28 May, 2025; v1 submitted 14 March, 2025;
originally announced March 2025.
-
Archiving and Replaying Current Web Advertisements: Challenges and Opportunities
Authors:
Travis Reid,
Alex H. Poole,
Hyung Wook Choi,
Christopher Rauch,
Mat Kelly,
Michael L. Nelson,
Michele C. Weigle
Abstract:
Although web advertisements represent an inimitable part of digital cultural heritage, serious archiving and replay challenges persist. To explore these challenges, we created a dataset of 279 archived ads. We encountered five problems in archiving and replaying them. For one, prior to August 2023, Internet Archive's Save Page Now service excluded not only well-known ad services' ads, but also URL…
▽ More
Although web advertisements represent an inimitable part of digital cultural heritage, serious archiving and replay challenges persist. To explore these challenges, we created a dataset of 279 archived ads. We encountered five problems in archiving and replaying them. For one, prior to August 2023, Internet Archive's Save Page Now service excluded not only well-known ad services' ads, but also URLs with ad related file and directory names. Although after August 2023, Save Page Now still blocked the archiving of ads loaded on a web page, it permitted the archiving of an ad's resources if the user directly archived the URL(s) associated with the ad. Second, Brozzler's incompatibility with Chrome prevented ads from being archived. Third, during crawling and replay sessions, Google's and Amazon's ad scripts generated URLs with different random values. This precluded archived ads' replay. Updating replay systems' fuzzy matching approach should enable the replay of these ads. Fourth, when loading Flashtalking web page ads outside of ad iframes, the ad script requested a non-existent URL. This, prevented the replay of ad resources. But as was the case with Google and Amazon ads, updating replay systems' fuzzy matching approach should enable Flashtalking ads' replay. Finally, successful replay of ads loaded in iframes with the src attribute of "about:blank" depended upon a given browser's service worker implementation. A Chromium bug stopped service workers from accessing resources inside of this type of iframe, which in turn prevented replay. Replacing the "about:blank" value for the iframe's src attribute with a blob URL before an ad was loaded solved this problem. Resolving these replay problems will improve the replay of ads and other dynamically loaded embedded web resources that use random values or "about:blank" iframes.
△ Less
Submitted 3 February, 2025;
originally announced February 2025.
-
Discord's Design Encourages "Third Place" Social Media Experiences
Authors:
JaeWon Kim,
Thea Klein-Balajee,
Ryan M. Kelly,
Alexis Hiniker
Abstract:
In light of the diminishing presence of physical third places -- informal gathering spaces essential for social connection -- this study explores how the social media platform Discord fosters third-place experiences. Drawing on Oldenburg's conceptual framework, we analyze how Discord's design elements support the creation of virtual third places that foster both dyadic and community-based relation…
▽ More
In light of the diminishing presence of physical third places -- informal gathering spaces essential for social connection -- this study explores how the social media platform Discord fosters third-place experiences. Drawing on Oldenburg's conceptual framework, we analyze how Discord's design elements support the creation of virtual third places that foster both dyadic and community-based relationships. Through 25 semi-structured interviews with active Discord users, we identified 21 design elements aligned with Oldenburg's third-place characteristics. These elements cluster around four core principles: providing themed spaces for repeated interactions, supporting user autonomy and customization, facilitating mutually engaging activities, and enabling casual, low-pressure interactions. This work contributes to understanding how intentional platform design can cultivate virtual spaces that support meaningful social connections. The findings have implications for designing future social technologies that can help address growing concerns about social isolation in an increasingly digital world.
△ Less
Submitted 16 January, 2025;
originally announced January 2025.
-
IXPE detection of highly polarized X-rays from the magnetar 1E 1841-045
Authors:
Michela Rigoselli,
Roberto Taverna,
Sandro Mereghetti,
Roberto Turolla,
Gian Luca Israel,
Silvia Zane,
Lorenzo Marra,
Fabio Muleri,
Alice Borghese,
Francesco Coti Zelati,
Davide De Grandis,
Matteo Imbrogno,
Ruth M. E. Kelly,
Paolo Esposito,
Nanda Rea
Abstract:
The Imaging X-ray Polarimetry Explorer (IXPE) observed for the first time highly polarized X-ray emission from the magnetar 1E 1841-045, targeted after a burst-active phase in August 2024. To date, IXPE has observed four other magnetars during quiescent periods, highlighting substantially different polarization properties. 1E 1841-045 exhibits a high, energy-dependent polarization degree, which in…
▽ More
The Imaging X-ray Polarimetry Explorer (IXPE) observed for the first time highly polarized X-ray emission from the magnetar 1E 1841-045, targeted after a burst-active phase in August 2024. To date, IXPE has observed four other magnetars during quiescent periods, highlighting substantially different polarization properties. 1E 1841-045 exhibits a high, energy-dependent polarization degree, which increases monotonically from ~15% at 2-3 keV up to ~55% at 5.5-8 keV, while the polarization angle, aligned with the celestial North, remains fairly constant. The broadband spectrum (2-79 keV) obtained by combining simultaneous IXPE and NuSTAR data is well modeled by a blackbody and two power-law components. The unabsorbed 2-8 keV flux (~2E-11 erg/cm2/s) is about 10% higher than that obtained from archival XMM-Newton and NuSTAR observations. The polarization of the soft, thermal component does not exceed ~25%, and may be produced by a condensed surface or a bombarded atmosphere. The intermediate power law is polarized at around 30%, consistent with predictions for resonant Compton scattering in the star magnetosphere; while, the hard power law exhibits a polarization degree exceeding 65%, pointing to a synchrotron/curvature origin.
△ Less
Submitted 28 February, 2025; v1 submitted 20 December, 2024;
originally announced December 2024.
-
Unconditionally stable symplectic integrators for the Navier-Stokes equations and other dissipative systems
Authors:
Sutthikiat Sungkeetanon,
Joseph S. Gaglione,
Robert L. Chapman,
Tyler M. Kelly,
Howard A. Cushman,
Blakeley H. Odom,
Bryan MacGavin,
Gafar A. Elamin,
Nathan J. Washuta,
Jonathan E. Crosmer,
Adam C. DeVoria,
John W. Sanders
Abstract:
Symplectic integrators offer vastly superior performance over traditional numerical techniques for conservative dynamical systems, but their application to \emph{dissipative} systems is inherently difficult due to dissipative systems' lack of symplectic structure. Leveraging the intrinsic variational structure of higher-order dynamics, this paper presents a general technique for applying existing…
▽ More
Symplectic integrators offer vastly superior performance over traditional numerical techniques for conservative dynamical systems, but their application to \emph{dissipative} systems is inherently difficult due to dissipative systems' lack of symplectic structure. Leveraging the intrinsic variational structure of higher-order dynamics, this paper presents a general technique for applying existing symplectic integration schemes to dissipative systems, with particular emphasis on viscous fluids modeled by the Navier-Stokes equations. Two very simple such schemes are developed here. Not only are these schemes unconditionally stable for dissipative systems, they also outperform traditional methods with a similar degree of complexity in terms of accuracy for a given time step. For example, in the case of viscous flow between two infinite, flat plates, one of the schemes developed here is found to outperform both the implicit Euler method and the explicit fourth-order Runge-Kutta method in predicting the velocity profile. To the authors' knowledge, this is the very first time that a symplectic integration scheme has been applied successfully to the Navier-Stokes equations. We interpret the present success as direct empirical validation of the canonical Hamiltonian formulation of the Navier-Stokes problem recently published by Sanders~\emph{et al.} More sophisticated symplectic integration schemes are expected to exhibit even greater performance. It is hoped that these results will lead to improved numerical methods in computational fluid dynamics.
△ Less
Submitted 12 November, 2024;
originally announced November 2024.
-
A generalized software framework for consolidation of radiotherapy planning and delivery data from diverse data sources
Authors:
Yasin Abdulkadir,
Justin Hink,
Peter Boyle,
Dishane Luximon,
Justin Pijanowski,
Timothy Ritter,
Bruce Curran,
Min Leu,
Nicholas Nickols,
Steve P. Lee,
Jatinder R. Palta,
Maria Kelly,
Rishabh Kapoor,
Reid Thompson,
Daniel A. Low,
James M. Lamb,
Jack Neylon
Abstract:
Aggregating large-scale radiotherapy planning and delivery data is crucial for advancing radiation oncology research and improving clinical practice, yet challenges persist due to the diversity of treatment planning systems (TPS), record and verify (R&V) systems, and complex data formats lacking standardized retrieval methods. We developed a robust software framework that automates the collection…
▽ More
Aggregating large-scale radiotherapy planning and delivery data is crucial for advancing radiation oncology research and improving clinical practice, yet challenges persist due to the diversity of treatment planning systems (TPS), record and verify (R&V) systems, and complex data formats lacking standardized retrieval methods. We developed a robust software framework that automates the collection and integration of multi-institutional radiotherapy data from diverse TPS and R&V systems. By utilizing the unidirectional references of DICOM objects, our framework reconstructs complete patient datasets starting from Radiotherapy Treatment Records (RTRECORDs), managing tasks such as data queries, transfers, verification, and logging. It effectively maps DICOM linkages between RTRECORDs, RTPLANs, RTDOSEs, RTSTRUCTs, planning images, registrations, and associated diagnostic images, incorporating custom modules for data conversion and comprehensive error handling. Implemented across multiple institutions using various systems$-$ including ARIA, Eclipse, MOSAIQ, RayStation, MIM, Pinnacle$-$ the framework successfully collected data from two clinics over an 11-year period, aggregating data from 6,022 patients and 13,871 treatment plans with a success rate of 99.76% and an average processing time of approximately 18 minutes per patient. Ongoing efforts are extending data collection to clinics lacking DICOM Query/Retrieve capabilities, demonstrating the framework's adaptability to various clinical environments. This efficient automation of comprehensive data collection overcomes significant technical barriers, facilitating the creation of large-scale datasets that can accelerate advancements in radiation oncology.
△ Less
Submitted 13 November, 2024;
originally announced November 2024.
-
Benchmark Data Repositories for Better Benchmarking
Authors:
Rachel Longjohn,
Markelle Kelly,
Sameer Singh,
Padhraic Smyth
Abstract:
In machine learning research, it is common to evaluate algorithms via their performance on standard benchmark datasets. While a growing body of work establishes guidelines for -- and levies criticisms at -- data and benchmarking practices in machine learning, comparatively less attention has been paid to the data repositories where these datasets are stored, documented, and shared. In this paper,…
▽ More
In machine learning research, it is common to evaluate algorithms via their performance on standard benchmark datasets. While a growing body of work establishes guidelines for -- and levies criticisms at -- data and benchmarking practices in machine learning, comparatively less attention has been paid to the data repositories where these datasets are stored, documented, and shared. In this paper, we analyze the landscape of these $\textit{benchmark data repositories}$ and the role they can play in improving benchmarking. This role includes addressing issues with both datasets themselves (e.g., representational harms, construct validity) and the manner in which evaluation is carried out using such datasets (e.g., overemphasis on a few datasets and metrics, lack of reproducibility). To this end, we identify and discuss a set of considerations surrounding the design and use of benchmark data repositories, with a focus on improving benchmarking practices in machine learning.
△ Less
Submitted 31 October, 2024;
originally announced October 2024.
-
Outcomes from a Workshop on a National Center for Quantum Education
Authors:
Edwin Barnes,
Michael B. Bennett,
Alexandra Boltasseva,
Victoria Borish,
Bennett Brown,
Lincoln D. Carr,
Russell R. Ceballos,
Faith Dukes,
Emily W. Easton,
Sophia E. Economou,
E. E. Edwards,
Noah D. Finkelstein,
C. Fracchiolla,
Diana Franklin,
J. K. Freericks,
Valerie Goss,
Mark Hannum,
Nancy Holincheck,
Angela M. Kelly,
Olivia Lanes,
H. J. Lewandowski,
Karen Jo Matsler,
Emily Mercurio,
Inès Montaño,
Maajida Murdock
, et al. (13 additional authors not shown)
Abstract:
In response to numerous programs seeking to advance quantum education and workforce development in the United States, experts from academia, industry, government, and professional societies convened for a National Science Foundation-sponsored workshop in February 2024 to explore the benefits and challenges of establishing a national center for quantum education. Broadly, such a center would foster…
▽ More
In response to numerous programs seeking to advance quantum education and workforce development in the United States, experts from academia, industry, government, and professional societies convened for a National Science Foundation-sponsored workshop in February 2024 to explore the benefits and challenges of establishing a national center for quantum education. Broadly, such a center would foster collaboration and build the infrastructure required to develop a diverse and quantum-ready workforce. The workshop discussions centered around how a center could uniquely address gaps in public, K-12, and undergraduate quantum information science and engineering (QISE) education. Specifically, the community identified activities that, through a center, could lead to an increase in student awareness of quantum careers, boost the number of educators trained in quantum-related subjects, strengthen pathways into quantum careers, enhance the understanding of the U.S. quantum workforce, and elevate public engagement with QISE. Core proposed activities for the center include professional development for educators, coordinated curriculum development and curation, expanded access to educational laboratory equipment, robust evaluation and assessment practices, network building, and enhanced public engagement with quantum science.
△ Less
Submitted 30 October, 2024;
originally announced October 2024.
-
X-ray polarisation signatures in bombarded magnetar atmospheres
Authors:
Ruth M. E. Kelly,
Denis González-Caniulef,
Silvia Zane,
Roberto Turolla,
Roberto Taverna
Abstract:
Magnetars are neutron stars that host huge, complex magnetic fields which require supporting currents to flow along the closed field lines. This makes magnetar atmospheres different from those of passively cooling neutron stars because of the heat deposited by backflowing charges impinging on the star surface layers. This particle bombardment is expected to imprint the spectral and, even more, the…
▽ More
Magnetars are neutron stars that host huge, complex magnetic fields which require supporting currents to flow along the closed field lines. This makes magnetar atmospheres different from those of passively cooling neutron stars because of the heat deposited by backflowing charges impinging on the star surface layers. This particle bombardment is expected to imprint the spectral and, even more, the polarisation properties of the emitted thermal radiation. We present solutions for the radiative transfer problem for bombarded plane-parallel atmospheres in the high magnetic field regime. The temperature profile is assumed a priori, and selected in such a way to reflect the varying rate of energy deposition in the slab (from the impinging currents and/or from the cooling crust). We find that thermal X-ray emission powered entirely by the energy released in the atmosphere by the magnetospheric back-bombardment is linearly polarised and X-mode dominated, but its polarisation degree is significantly reduced (down to $10-50\%$) when compared with that expected from a standard atmosphere heated only from the cooling crust below. By increasing the fraction of heat flowing in from the crust the polarisation degree of the emergent radiation increases, first at higher energies ($\sim 10$ keV) and then in the entire soft X-ray band. We use our models inside a ray-tracing code to derive the expected emission properties as measured by a distant observer and compare our results with recent IXPE observations of magnetar sources.
△ Less
Submitted 17 September, 2024;
originally announced September 2024.
-
Envisioning New Futures of Positive Social Technology: Beyond Paradigms of Fixing, Protecting, and Preventing
Authors:
JaeWon Kim,
Lindsay Popowski,
Anna Fang,
Cassidy Pyle,
Guo Freeman,
Ryan M. Kelly,
Angela Y. Lee,
Fannie Liu,
Angela D. R. Smith,
Alexandra To,
Amy X. Zhang
Abstract:
Social technology research today largely focuses on mitigating the negative impacts of technology and, therefore, often misses the potential of technology to enhance human connections and well-being. However, we see a potential to shift towards a holistic view of social technology's impact on human flourishing. We introduce Positive Social Technology (Positech), a framework that shifts emphasis to…
▽ More
Social technology research today largely focuses on mitigating the negative impacts of technology and, therefore, often misses the potential of technology to enhance human connections and well-being. However, we see a potential to shift towards a holistic view of social technology's impact on human flourishing. We introduce Positive Social Technology (Positech), a framework that shifts emphasis toward leveraging social technologies to support and augment human flourishing. This workshop is organized around three themes relevant to Positech: 1) "Exploring Relevant and Adjacent Research" to define and widen the Positech scope with insights from related fields, 2) "Projecting the Landscape of Positech" for participants to outline the domain's key aspects and 3) "Envisioning the Future of Positech," anchored around strategic planning towards a sustainable research community. Ultimately, this workshop will serve as a platform to shift the narrative of social technology research towards a more positive, human-centric approach. It will foster research that goes beyond fixing technologies to protect humans from harm, to also pursue enriching human experiences and connections through technology.
△ Less
Submitted 14 October, 2024; v1 submitted 24 July, 2024;
originally announced July 2024.
-
Perceptions of Linguistic Uncertainty by Language Models and Humans
Authors:
Catarina G Belem,
Markelle Kelly,
Mark Steyvers,
Sameer Singh,
Padhraic Smyth
Abstract:
_Uncertainty expressions_ such as "probably" or "highly unlikely" are pervasive in human language. While prior work has established that there is population-level agreement in terms of how humans quantitatively interpret these expressions, there has been little inquiry into the abilities of language models in the same context. In this paper, we investigate how language models map linguistic expres…
▽ More
_Uncertainty expressions_ such as "probably" or "highly unlikely" are pervasive in human language. While prior work has established that there is population-level agreement in terms of how humans quantitatively interpret these expressions, there has been little inquiry into the abilities of language models in the same context. In this paper, we investigate how language models map linguistic expressions of uncertainty to numerical responses. Our approach assesses whether language models can employ theory of mind in this setting: understanding the uncertainty of another agent about a particular statement, independently of the model's own certainty about that statement. We find that 7 out of 10 models are able to map uncertainty expressions to probabilistic responses in a human-like manner. However, we observe systematically different behavior depending on whether a statement is actually true or false. This sensitivity indicates that language models are substantially more susceptible to bias based on their prior knowledge (as compared to humans). These findings raise important questions and have broad implications for human-AI and AI-AI communication.
△ Less
Submitted 7 November, 2024; v1 submitted 22 July, 2024;
originally announced July 2024.
-
Final-state interactions in neutrino-induced proton knockout from argon in MicroBooNE
Authors:
A. Nikolakopoulos,
A. Ershova,
R. González-Jiménez,
J. Isaacson,
A. M. Kelly,
K. Niewczas,
N. Rocco,
F. Sánchez
Abstract:
Neutrino event generators make use of intranuclear cascade models (INCs), to predict the kinematics of hadrons produced in neutrino-nucleus interactions. We perform a consistent comparison of different INCs, by using the same set of events as input to the NEUT, NuWro, Achilles and INCL INCs. The inputs correspond to calculations of the fully differential single-proton knockout cross section, eithe…
▽ More
Neutrino event generators make use of intranuclear cascade models (INCs), to predict the kinematics of hadrons produced in neutrino-nucleus interactions. We perform a consistent comparison of different INCs, by using the same set of events as input to the NEUT, NuWro, Achilles and INCL INCs. The inputs correspond to calculations of the fully differential single-proton knockout cross section, either in the distorted-wave impulse approximation (DWIA) or plane-wave impulse approximation (PWIA), both including realistic nuclear hole spectral functions. We compare the INC results to DWIA calculations with an optical potential, used extensively in the analysis of (e,e'p) experiments. We point out a systematic discrepancy between both approaches. We apply the INC results to recent MicroBooNE data. We assess the influence of the choice of spectral function, finding that large variations in realistic spectral functions are indistinguishable with present data. The data is underpredicted, with strength missing in the region where two-nucleon knockout and resonance production contribute. However, the data is underpredicted also in regions of low transverse missing momentum, where one-nucleon knockout dominates. The inclusion of the interference with two-body currents could lead to additional strength in this region.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Estimating Canopy Height at Scale
Authors:
Jan Pauls,
Max Zimmer,
Una M. Kelly,
Martin Schwartz,
Sassan Saatchi,
Philippe Ciais,
Sebastian Pokutta,
Martin Brandt,
Fabian Gieseke
Abstract:
We propose a framework for global-scale canopy height estimation based on satellite data. Our model leverages advanced data preprocessing techniques, resorts to a novel loss function designed to counter geolocation inaccuracies inherent in the ground-truth height measurements, and employs data from the Shuttle Radar Topography Mission to effectively filter out erroneous labels in mountainous regio…
▽ More
We propose a framework for global-scale canopy height estimation based on satellite data. Our model leverages advanced data preprocessing techniques, resorts to a novel loss function designed to counter geolocation inaccuracies inherent in the ground-truth height measurements, and employs data from the Shuttle Radar Topography Mission to effectively filter out erroneous labels in mountainous regions, enhancing the reliability of our predictions in those areas. A comparison between predictions and ground-truth labels yields an MAE / RMSE of 2.43 / 4.73 (meters) overall and 4.45 / 6.72 (meters) for trees taller than five meters, which depicts a substantial improvement compared to existing global-scale maps. The resulting height map as well as the underlying framework will facilitate and enhance ecological analyses at a global scale, including, but not limited to, large-scale forest and biomass monitoring.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Segmentation of Maya hieroglyphs through fine-tuned foundation models
Authors:
FNU Shivam,
Megan Leight,
Mary Kate Kelly,
Claire Davis,
Kelsey Clodfelter,
Jacob Thrasher,
Yenumula Reddy,
Prashnna Gyawali
Abstract:
The study of Maya hieroglyphic writing unlocks the rich history of cultural and societal knowledge embedded within this ancient civilization's visual narrative. Artificial Intelligence (AI) offers a novel lens through which we can translate these inscriptions, with the potential to allow non-specialists access to reading these texts and to aid in the decipherment of those hieroglyphs which continu…
▽ More
The study of Maya hieroglyphic writing unlocks the rich history of cultural and societal knowledge embedded within this ancient civilization's visual narrative. Artificial Intelligence (AI) offers a novel lens through which we can translate these inscriptions, with the potential to allow non-specialists access to reading these texts and to aid in the decipherment of those hieroglyphs which continue to elude comprehensive interpretation. Toward this, we leverage a foundational model to segment Maya hieroglyphs from an open-source digital library dedicated to Maya artifacts. Despite the initial promise of publicly available foundational segmentation models, their effectiveness in accurately segmenting Maya hieroglyphs was initially limited. Addressing this challenge, our study involved the meticulous curation of image and label pairs with the assistance of experts in Maya art and history, enabling the fine-tuning of these foundational models. This process significantly enhanced model performance, illustrating the potential of fine-tuning approaches and the value of our expanding dataset. We plan to open-source this dataset for encouraging future research, and eventually to help make the hieroglyphic texts legible to a broader community, particularly for Maya heritage community members.
△ Less
Submitted 26 May, 2024;
originally announced May 2024.
-
Automatic Quantification of Serial PET/CT Images for Pediatric Hodgkin Lymphoma Patients Using a Longitudinally-Aware Segmentation Network
Authors:
Xin Tie,
Muheon Shin,
Changhee Lee,
Scott B. Perlman,
Zachary Huemann,
Amy J. Weisman,
Sharon M. Castellino,
Kara M. Kelly,
Kathleen M. McCarten,
Adina L. Alazraki,
Junjie Hu,
Steve Y. Cho,
Tyler J. Bradshaw
Abstract:
$\textbf{Purpose}$: Automatic quantification of longitudinal changes in PET scans for lymphoma patients has proven challenging, as residual disease in interim-therapy scans is often subtle and difficult to detect. Our goal was to develop a longitudinally-aware segmentation network (LAS-Net) that can quantify serial PET/CT images for pediatric Hodgkin lymphoma patients. $\textbf{Materials and Metho…
▽ More
$\textbf{Purpose}$: Automatic quantification of longitudinal changes in PET scans for lymphoma patients has proven challenging, as residual disease in interim-therapy scans is often subtle and difficult to detect. Our goal was to develop a longitudinally-aware segmentation network (LAS-Net) that can quantify serial PET/CT images for pediatric Hodgkin lymphoma patients. $\textbf{Materials and Methods}$: This retrospective study included baseline (PET1) and interim (PET2) PET/CT images from 297 patients enrolled in two Children's Oncology Group clinical trials (AHOD1331 and AHOD0831). LAS-Net incorporates longitudinal cross-attention, allowing relevant features from PET1 to inform the analysis of PET2. Model performance was evaluated using Dice coefficients for PET1 and detection F1 scores for PET2. Additionally, we extracted and compared quantitative PET metrics, including metabolic tumor volume (MTV) and total lesion glycolysis (TLG) in PET1, as well as qPET and $Δ$SUVmax in PET2, against physician measurements. We quantified their agreement using Spearman's $ρ$ correlations and employed bootstrap resampling for statistical analysis. $\textbf{Results}$: LAS-Net detected residual lymphoma in PET2 with an F1 score of 0.606 (precision/recall: 0.615/0.600), outperforming all comparator methods (P<0.01). For baseline segmentation, LAS-Net achieved a mean Dice score of 0.772. In PET quantification, LAS-Net's measurements of qPET, $Δ$SUVmax, MTV and TLG were strongly correlated with physician measurements, with Spearman's $ρ$ of 0.78, 0.80, 0.93 and 0.96, respectively. The performance remained high, with a slight decrease, in an external testing cohort. $\textbf{Conclusion}$: LAS-Net demonstrated significant improvements in quantifying PET metrics across serial scans, highlighting the value of longitudinal awareness in evaluating multi-time-point imaging datasets.
△ Less
Submitted 30 September, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Statistical evaluation of 571 GaAs quantum point contact transistors showing the 0.7 anomaly in quantized conductance using millikelvin cryogenic on-chip multiplexing
Authors:
Pengcheng Ma,
Kaveh Delfanazari,
Reuben K. Puddy,
Jiahui Li,
Moda Cao,
Teng Yi,
Jonathan P. Griffiths,
Harvey E. Beere,
David A. Ritchie,
Michael J. Kelly,
Charles G. Smith
Abstract:
The mass production and the practical number of cryogenic quantum devices producible in a single chip are limited to the number of electrical contact pads and wiring of the cryostat or dilution refrigerator. It is, therefore, beneficial to contrast the measurements of hundreds of devices fabricated in a single chip in one cooldown process to promote the scalability, integrability, reliability, and…
▽ More
The mass production and the practical number of cryogenic quantum devices producible in a single chip are limited to the number of electrical contact pads and wiring of the cryostat or dilution refrigerator. It is, therefore, beneficial to contrast the measurements of hundreds of devices fabricated in a single chip in one cooldown process to promote the scalability, integrability, reliability, and reproducibility of quantum devices and to save evaluation time, cost and energy. Here, we use a cryogenic on-chip multiplexer architecture and investigate the statistics of the 0.7 anomaly observed on the first three plateaus of the quantized conductance of semiconductor quantum point contact (QPC) transistors. Our single chips contain 256 split gate field effect QPC transistors (QFET) each, with two 16-branch multiplexed source-drain and gate pads, allowing individual transistors to be selected, addressed and controlled through an electrostatic gate voltage process. A total of 1280 quantum transistors with nano-scale dimensions are patterned in 5 different chips of GaAs heterostructures. From the measurements of 571 functioning QPCs taken at temperatures T= 1.4 K and T= 40 mK, it is found that the spontaneous polarisation model and Kondo effect do not fit our results. Furthermore, some of the features in our data largely agreed with van Hove model with short-range interactions. Our approach provides further insight into the quantum mechanical properties and microscopic origin of the 0.7 anomaly in QPCs, paving the way for the development of semiconducting quantum circuits and integrated cryogenic electronics, for scalable quantum logic control, readout, synthesis, and processing applications.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Reconfigurable multiplex setup for high throughput electrical characterisation at cryogenic temperature
Authors:
Xinya Bian,
Hannah J Joyce,
Charles G Smith,
Michael J Kelly,
G Andrew D Briggs,
Jan A Mol
Abstract:
In this paper, we present a reconfigurable multiplex (MUX) setup that increases the throughput of electrical characterisation at cryogenic temperature. The setup separates the MUX circuitry from quantum device under test (qDUT), allowing qDUT chips to be exchanged easily and MUX chips to be reused. To interface with different types of qDUTs, board-level designs are incorporated to allow interconne…
▽ More
In this paper, we present a reconfigurable multiplex (MUX) setup that increases the throughput of electrical characterisation at cryogenic temperature. The setup separates the MUX circuitry from quantum device under test (qDUT), allowing qDUT chips to be exchanged easily and MUX chips to be reused. To interface with different types of qDUTs, board-level designs are incorporated to allow interconnects flexibly routed into different topology. MUXs are built based on a multiple level selective gating (MLSG) scheme, where the number of multiplexed output channels (interconnects) is exponentially dependent on the number of control lines. In the prototype setup presented in this paper, with 14 out of 44 existing wires from room temperature, 4 MUXs at cryogenic temperature can supply in total 128 interconnects to interface with qDUTs. We validate the MUX setup operation and assess the various limits existed by measuring k$Ω$ resistors made of $μ$m-size graphene ribbons. We further demonstrate the setup by performing charge transport measurement on 128 nm-size graphene quantum devices in a single cooling down.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Bridging Generative Networks with the Common Model of Cognition
Authors:
Robert L. West,
Spencer Eckler,
Brendan Conway-Smith,
Nico Turcas,
Eilene Tomkins-Flanagan,
Mary Alexandria Kelly
Abstract:
This article presents a theoretical framework for adapting the Common Model of Cognition to large generative network models within the field of artificial intelligence. This can be accomplished by restructuring modules within the Common Model into shadow production systems that are peripheral to a central production system, which handles higher-level reasoning based on the shadow productions' outp…
▽ More
This article presents a theoretical framework for adapting the Common Model of Cognition to large generative network models within the field of artificial intelligence. This can be accomplished by restructuring modules within the Common Model into shadow production systems that are peripheral to a central production system, which handles higher-level reasoning based on the shadow productions' output. Implementing this novel structure within the Common Model allows for a seamless connection between cognitive architectures and generative neural networks.
△ Less
Submitted 25 January, 2024;
originally announced March 2024.
-
The Effects of Generative AI on Design Fixation and Divergent Thinking
Authors:
Samangi Wadinambiarachchi,
Ryan M. Kelly,
Saumya Pareek,
Qiushi Zhou,
Eduardo Velloso
Abstract:
Generative AI systems have been heralded as tools for augmenting human creativity and inspiring divergent thinking, though with little empirical evidence for these claims. This paper explores the effects of exposure to AI-generated images on measures of design fixation and divergent thinking in a visual ideation task. Through a between-participants experiment (N=60), we found that support from an…
▽ More
Generative AI systems have been heralded as tools for augmenting human creativity and inspiring divergent thinking, though with little empirical evidence for these claims. This paper explores the effects of exposure to AI-generated images on measures of design fixation and divergent thinking in a visual ideation task. Through a between-participants experiment (N=60), we found that support from an AI image generator during ideation leads to higher fixation on an initial example. Participants who used AI produced fewer ideas, with less variety and lower originality compared to a baseline. Our qualitative analysis suggests that the effectiveness of co-ideation with AI rests on participants' chosen approach to prompt creation and on the strategies used by participants to generate ideas in response to the AI's suggestions. We discuss opportunities for designing generative AI systems for ideation support and incorporating these AI tools into ideation workflows.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Everyday Uses of Music Listening and Music Technologies by Caregivers and People with Dementia: Survey and Focus Group Study
Authors:
Dianna Vidas,
Romina Carrasco,
Ryan M. Kelly,
Jenny Waycott,
Jeanette Tamplin,
Kate McMahon,
Libby M. Flynn,
Phoebe A. Stretton-Smith,
Tanara Vieira Sousa,
Felicity A. Baker
Abstract:
Music is a valuable non-pharmacological tool that provides benefits for people with dementia, and there is interest in designing technologies to support music use in dementia care. To ensure music technologies are appropriately designed for supporting caregivers and people living with dementia, there remains a need to better understand how music is currently used in everyday care at home. We aimed…
▽ More
Music is a valuable non-pharmacological tool that provides benefits for people with dementia, and there is interest in designing technologies to support music use in dementia care. To ensure music technologies are appropriately designed for supporting caregivers and people living with dementia, there remains a need to better understand how music is currently used in everyday care at home. We aimed to understand how people with dementia and their caregivers use music technologies in everyday caring, as well as challenges they experience using music and technology. This study used a mixed methods design. A survey was completed by 77 caregivers and people with dementia to understand their use of music and technology. Of these, 18 survey respondents (12 family caregivers, 6 people living with dementia) participated in focus groups about their experiences of using music and technology in care. Transcripts were analysed with reflexive thematic analysis. Most survey respondents used music often in their daily lives, reporting a range of music technologies such as CDs, radio, and streaming. Focus groups highlighted benefits and challenges of music technologies in everyday care. Participants used music and music technologies to regulate mood, provide joy, facilitate social connection, encourage reminiscence, provide continuity before and after diagnosis, and to make caregiving easier. Challenges of using music technology in care included difficulties staying up to date with evolving technology, and low self-efficacy for technology use expressed by people living with dementia. Evidently, people living with dementia and their caregivers use music technologies to support their everyday care needs. Results suggest opportunities to design technologies enabling easier access to music and supporting people living with dementia with recreational and therapeutic music listening and music-based activities.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Periodic orbit theory of Bethe-integrable quantum systems: an $N$-particle Berry-Tabor trace formula
Authors:
Juan Diego Urbina,
Michael Kelly,
Klaus Richter
Abstract:
One of the fundamental results of semiclassical theory is the existence of trace formulae showing how spectra of quantum mechanical systems emerge from massive interference among amplitudes related with time-periodic structures of the corresponding classical limit. If it displays the properties of Hamiltonian integrability, this connection is given by the celebrated Berry-Tabor trace formula, and…
▽ More
One of the fundamental results of semiclassical theory is the existence of trace formulae showing how spectra of quantum mechanical systems emerge from massive interference among amplitudes related with time-periodic structures of the corresponding classical limit. If it displays the properties of Hamiltonian integrability, this connection is given by the celebrated Berry-Tabor trace formula, and the periodic structures it is built on are KAM tori supporting closed trajectories in phase space. Here we show how to extend this connection into the domain of quantum many-body systems displaying integrability in the sense of the Bethe ansatz, where a classical limit cannot be rigorously defined due to the presence of singular potentials. Formally following the original derivation of Berry and Tabor [1, 2], but applied to the Bethe equations without underlying classical structure, we obtain a many-particle trace formula for the density of states of N interacting bosons on a ring, the Lieb-Liniger model. Our semiclassical expressions are in excellent agreement with quantum mechanical results for $N$ = 2, 3 and 4 particles. For N = 2 we relate our results to the quantization of billiards with mixed boundary conditions. Our work paves the way towards the treatment of the important class of integrable many-body systems by means of semiclassical trace formulae pioneered by Michael Berry in the single-particle context.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
Latest Development of Electropolishing Optimization for 650 MHz Niobium Cavity
Authors:
V. Chouhan,
D. Bice,
D. Burk,
S. Chandrasekaran,
A. Cravatta,
P. Dubiel,
G. V. Eremeev,
F. Furuta,
O. Melnychuk,
A. Netepenko,
M. K. Ng,
J. Ozelis,
H. Park,
T. Ring,
G. Wu,
B. Guilfoyle,
M. P. Kelly,
T. Reid
Abstract:
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP param…
▽ More
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP parameters on the surface of 650 MHz niobium cavities used in the Proton Improvement Plan-II (PIP-II) linear accelerator. Parameters optimized in this study provided a smooth surface of the cavities. The electropolished cavity showed significantly a higher accelerating gradient meeting baseline requirement and qualified for further surface treatment to improve the cavity quality factor.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Older Adults Imagining Future Technologies in Participatory Design Workshops: Supporting Continuity in the Pursuit of Meaningful Activities
Authors:
Wei Zhao,
Ryan M. Kelly,
Melissa J. Rogerson,
Jenny Waycott
Abstract:
Recent innovations in digital technology offer significant opportunities for older adults to engage in meaningful activities. To investigate older adults' perceptions of using existing and emerging technologies for meaningful activities, we conducted three participatory design workshops and follow-up interviews with adults aged over 65. The workshops encompassed discussions on existing technologie…
▽ More
Recent innovations in digital technology offer significant opportunities for older adults to engage in meaningful activities. To investigate older adults' perceptions of using existing and emerging technologies for meaningful activities, we conducted three participatory design workshops and follow-up interviews with adults aged over 65. The workshops encompassed discussions on existing technologies for meaningful activities, demonstrations of emerging technologies such as VR, AR, and AI, and design activities including prototyping and storyboarding. Our findings show that while participants had diverse interpretations of meaningful activities, they sought to use technologies to support continuity in the pursuit of these activities. Specifically, participants highlighted the importance of safe aging at home, which provides a pathway for meaningful activities in later life. We further discuss participants' discerning attitudes when assessing the use of different technologies for meaningful activities and several values and attributes they desire when envisioning future technologies, including simplicity, positivity, proactivity, and integration.
△ Less
Submitted 23 May, 2024; v1 submitted 21 January, 2024;
originally announced January 2024.
-
Chemical Classification of Spherules Recovered From The Pacific Ocean Site of The CNEOS 2014-01-08 (IM1) Bolide
Authors:
A. Loeb,
S. B. Jacobsen,
R. Tagle,
T. Adamson,
S. Bergstrom,
R. Cloete,
S. Cohen,
Laura Domine,
H. Fu,
C. Hoskinson,
E. Hyung,
M. Kelly,
E. Lard,
F. Laukien,
J. Lem,
R. McCallum,
R. Millsap,
C. Parendo,
M. I. Pataev,
C. Peddeti,
J. Pugh,
S. Samuha,
D. D. Sasselov,
M. Schlereth,
J. Siler
, et al. (6 additional authors not shown)
Abstract:
We have conducted an extensive towed-magnetic-sled survey during the period of June 14-28, 2023, over the seafloor about 85 km north of Manus Island, Papua New Guinea, centered around the calculated path of the bolide CNEOS 2014-01-08 (IM1). We found about 850 spherules of diameter 0.1-1.3 millimeters in our samples. The samples were analyzed by micro-XRF, Electron Probe Microanalyzer and ICP Mass…
▽ More
We have conducted an extensive towed-magnetic-sled survey during the period of June 14-28, 2023, over the seafloor about 85 km north of Manus Island, Papua New Guinea, centered around the calculated path of the bolide CNEOS 2014-01-08 (IM1). We found about 850 spherules of diameter 0.1-1.3 millimeters in our samples. The samples were analyzed by micro-XRF, Electron Probe Microanalyzer and ICP Mass spectrometry. Here we report major and trace element compositions of the samples and classify spherules based on that analysis. Spherules comprising 22% of the collection, appear to all reflect planetary igneous differentiation and are all different from previously described spherules. A subset of the differentiated-spherules show an excess of Be, La and U, by up to three orders of magnitude relative to the solar system standard of CI chondrites. Detailed mass spectrometry of 12 of these "BeLaU"-type spherules, the population of which may constitute up to ~10% of our entire collected sample, suggests that they are derived from material formed by planetary igneous fractionation. Their chemical composition is unlike any known solar system material. The "BeLaU"-type spherules reflect a highly differentiated, extremely evolved composition of an unknown source.
△ Less
Submitted 17 September, 2024; v1 submitted 18 January, 2024;
originally announced January 2024.
-
X-ray Polarisation in Magnetar Atmospheres -- Effects of Mode Conversion
Authors:
Ruth M. E. Kelly,
Silvia Zane,
Roberto Turolla,
Roberto Taverna
Abstract:
Magnetars, the most strongly magnetised neutron stars, are among the most promising targets for X-ray polarimetry. The Imaging X-ray Polarimetry Explorer (IXPE), the first satellite devoted to exploring the sky in polarised X-rays, has observed four magnetars to date. A proper interpretation of IXPE results requires the development of new atmospheric models that can take into proper account the ef…
▽ More
Magnetars, the most strongly magnetised neutron stars, are among the most promising targets for X-ray polarimetry. The Imaging X-ray Polarimetry Explorer (IXPE), the first satellite devoted to exploring the sky in polarised X-rays, has observed four magnetars to date. A proper interpretation of IXPE results requires the development of new atmospheric models that can take into proper account the effects of the magnetised vacuum on par with those of the plasma. Here we investigate the effects of mode conversion at the vacuum resonance on the polarisation properties of magnetar emission by computing plane-parallel atmospheric models under varying conditions of magnetic field strength/orientation, effective temperature and allowing for either complete or partial adiabatic mode conversion. Complete mode conversion results in a switch of the dominant polarisation mode, from the extraordinary (X) to the ordinary (O) one, below an energy that decreases with increasing magnetic field strength, occurring at $\approx 0.5\, \mathrm{keV}$ for a magnetic field strength of $B=10^{14}\, \mathrm{G}$. Partial adiabatic mode conversion results in a reduced polarisation degree when compared with a standard plasma atmosphere. No dominant mode switch occurs for $B=10^{14}\, \mathrm{G}$ while there are two switches for lower fields of $B=3\times10^{13}\, \mathrm{G}$. Finally, by incorporating our models in a ray-tracing code, we computed the expected polarisation signal at infinity for different emitting regions on the star surface and for different viewing geometries. The observability of QED signatures with IXPE and with future soft X-ray polarimeters as REDSoX is discussed.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Quantum control in artificial neurons with superconductor-ionic memory inserted in the feedback
Authors:
Osama M. Nayfeh,
Haik Manukian,
Matthew Kelly,
Justin Mauger
Abstract:
To improve artificial intelligence/autonomous systems and help with treating neurological conditions, there's a requirement for artificial neuron hardware that mimics biological. We examine experimental artificial neurons with quantum tunneling memory using 4.2 nm of ionic Hafnium oxide and Niobium metal inserted in the positive and negative feedback of an oscillator. These neurons have adaptive s…
▽ More
To improve artificial intelligence/autonomous systems and help with treating neurological conditions, there's a requirement for artificial neuron hardware that mimics biological. We examine experimental artificial neurons with quantum tunneling memory using 4.2 nm of ionic Hafnium oxide and Niobium metal inserted in the positive and negative feedback of an oscillator. These neurons have adaptive spiking behavior and hybrid non-chaotic/chaotic modes. When networked, they output with strong itinerancy. The superconducting state at 8.1 Kelvin results in Josephson tunneling with signs that the ionic states are influenced by quantum coherent control in accordance with quantum master equation calculations of the expectation values and correlation functions with a calibrated time dependent Hamiltonian. We experimentally demonstrate a learning network of 4 artificial neurons, and the modulation of signals.
△ Less
Submitted 1 January, 2024;
originally announced January 2024.
-
arXiv:2312.11248
[pdf]
quant-ph
cond-mat.mes-hall
cond-mat.str-el
cond-mat.supr-con
physics.app-ph
Quantized conductance in split gate superconducting quantum point contacts with InGaAs semiconducting two-dimensional electron systems
Authors:
Kaveh Delfanazari,
Jiahui Li,
Yusheng Xiong,
Pengcheng Ma,
Reuben K. Puddy,
Teng Yi,
Ian Farrer,
Sachio Komori,
Jason W. A. Robinson,
Llorenc Serra,
David A. Ritchie,
Michael J. Kelly,
Hannah J. Joyce,
Charles G. Smith
Abstract:
Quantum point contact or QPC -- a constriction in a semiconducting two-dimensional (2D) electron system with a quantized conductance -- has been found as the building block of novel spintronic, and topological electronic circuits. They can also be used as readout electronic, charge sensor or switch in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a C…
▽ More
Quantum point contact or QPC -- a constriction in a semiconducting two-dimensional (2D) electron system with a quantized conductance -- has been found as the building block of novel spintronic, and topological electronic circuits. They can also be used as readout electronic, charge sensor or switch in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper pairs QPC analogue known as superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realisation of nanoscale SQPC arrays with split gate technology in semiconducting 2D electron systems, exploiting the special gate tunability of the quantum wells, and report the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Ab Initio and Kinetic Modelling of $β$-D-xylopyranose Under Fast Pyrolysis Conditions
Authors:
Jacopo Lupi,
Leandro Ayarde-Henríquez,
Mark Kelly,
Stephen Dooley
Abstract:
Lignocellulosic biomass is an abundant renewable resource that can be upgraded to chemical and fuel products through a range of thermal conversion processes. Fast pyrolysis is a promising technology that uses high temperatures and fast heating rates to convert lignocellulose into bio-oils in high yields in the absence of oxygen. Hemicellulose is one of three major components of lignocellulosic bio…
▽ More
Lignocellulosic biomass is an abundant renewable resource that can be upgraded to chemical and fuel products through a range of thermal conversion processes. Fast pyrolysis is a promising technology that uses high temperatures and fast heating rates to convert lignocellulose into bio-oils in high yields in the absence of oxygen. Hemicellulose is one of three major components of lignocellulosic biomass and is a highly branched heteropolymer structure made of pentose, hexose sugars, and sugar acids. In this study, $β$-D-xylopyranose is proposed as a model structural motif for the essential chemical structure of hemicellulose. The gas-phase pyrolytic reactivity of $β$-D-xylopyranose is thoroughly investigated using computational strategies rooted in quantum chemistry. In particular, its thermal degradation potential energy surfaces are computed employing Minnesota global hybrid functional M06-2X in conjunction with 6-311++G(d,p) Pople basis set. Electronic energies are further refined by performing DLPNO-CCSD(T)-F12 single point calculations on top of M06-2X geometries using cc-pVTZ-F12 basis set. Key thermodynamic quantities (free energies, barrier heights, enthalpies of formation, and heat capacities) are computed. Rate coefficients for the initial steps of thermal decomposition are computed by means of reaction rate theory. For the first time, a detailed elementary reaction kinetic model for $β$-D-xylopyranose is developed by utilizing the thermodynamic and kinetic information acquired from the aforementioned calculations. This model specifically targets the initial stages of $β$-D-xylopyranose pyrolysis, aiming to gain a deeper understanding of its reaction kinetics. This approach establishes a systematic strategy for exploring reactive pathways, evaluating competing parallel reactions, and selectively accepting or discarding pathways based on the analysis.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
A Neuro-mimetic Realization of the Common Model of Cognition via Hebbian Learning and Free Energy Minimization
Authors:
Alexander Ororbia,
Mary Alexandria Kelly
Abstract:
Over the last few years, large neural generative models, capable of synthesizing semantically rich passages of text or producing complex images, have recently emerged as a popular representation of what has come to be known as ``generative artificial intelligence'' (generative AI). Beyond opening the door to new opportunities as well as challenges for the domain of statistical machine learning, th…
▽ More
Over the last few years, large neural generative models, capable of synthesizing semantically rich passages of text or producing complex images, have recently emerged as a popular representation of what has come to be known as ``generative artificial intelligence'' (generative AI). Beyond opening the door to new opportunities as well as challenges for the domain of statistical machine learning, the rising popularity of generative AI brings with it interesting questions for Cognitive Science, which seeks to discover the nature of the processes that underpin minds and brains as well as to understand how such functionality might be acquired and instantianted in biological (or artificial) substrate. With this goal in mind, we argue that a promising research program lies in the crafting of cognitive architectures, a long-standing tradition of the field, cast fundamentally in terms of neuro-mimetic generative building blocks. Concretely, we discuss the COGnitive Neural GENerative system, such an architecture that casts the Common Model of Cognition in terms of Hebbian adaptation operating in service of optimizing a variational free energy functional.
△ Less
Submitted 3 November, 2023; v1 submitted 14 October, 2023;
originally announced October 2023.
-
On Identifying Points of Semantic Shift Across Domains
Authors:
Hyung Wook Choi,
Mat Kelly
Abstract:
The semantics used for particular terms in an academic field organically evolve over time. Tracking this evolution through inspection of published literature has either been from the perspective of Linguistic scholars or has concentrated the focus of term evolution within a single domain of study. In this paper, we performed a case study to identify semantic evolution across different domains and…
▽ More
The semantics used for particular terms in an academic field organically evolve over time. Tracking this evolution through inspection of published literature has either been from the perspective of Linguistic scholars or has concentrated the focus of term evolution within a single domain of study. In this paper, we performed a case study to identify semantic evolution across different domains and identify examples of inter-domain semantic shifts. We initially used keywords as the basis of our search and executed an iterative process of following citations to find the initial mention of the concepts in the field. We found that a select set of keywords like ``semaphore'', ``polymorphism'', and ``ontology'' were mentioned within Computer Science literature and tracked the seminal study that borrowed those terms from original fields by citations. We marked these events as semantic evolution points. Through this manual investigation method, we can identify term evolution across different academic fields. This study reports our initial findings that will seed future automated and computational methods of incorporating concepts from additional academic fields.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Worst-Case Morphs using Wasserstein ALI and Improved MIPGAN
Authors:
Una M. Kelly,
Meike Nauta,
Lu Liu,
Luuk J. Spreeuwers,
Raymond N. J. Veldhuis
Abstract:
A morph is a combination of two separate facial images and contains identity information of two different people. When used in an identity document, both people can be authenticated by a biometric Face Recognition (FR) system. Morphs can be generated using either a landmark-based approach or approaches based on deep learning such as Generative Adversarial Networks (GAN). In a recent paper, we intr…
▽ More
A morph is a combination of two separate facial images and contains identity information of two different people. When used in an identity document, both people can be authenticated by a biometric Face Recognition (FR) system. Morphs can be generated using either a landmark-based approach or approaches based on deep learning such as Generative Adversarial Networks (GAN). In a recent paper, we introduced a \emph{worst-case} upper bound on how challenging morphing attacks can be for an FR system. The closer morphs are to this upper bound, the bigger the challenge they pose to FR. We introduced an approach with which it was possible to generate morphs that approximate this upper bound for a known FR system (white box), but not for unknown (black box) FR systems.
In this paper, we introduce a morph generation method that can approximate worst-case morphs even when the FR system is not known. A key contribution is that we include the goal of generating difficult morphs \emph{during} training. Our method is based on Adversarially Learned Inference (ALI) and uses concepts from Wasserstein GANs trained with Gradient Penalty, which were introduced to stabilise the training of GANs. We include these concepts to achieve similar improvement in training stability and call the resulting method Wasserstein ALI (WALI). We finetune WALI using loss functions designed specifically to improve the ability to manipulate identity information in facial images and show how it can generate morphs that are more challenging for FR systems than landmark- or GAN-based morphs. We also show how our findings can be used to improve MIPGAN, an existing StyleGAN-based morph generator.
△ Less
Submitted 13 October, 2023; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Automatic Personalized Impression Generation for PET Reports Using Large Language Models
Authors:
Xin Tie,
Muheon Shin,
Ali Pirasteh,
Nevein Ibrahim,
Zachary Huemann,
Sharon M. Castellino,
Kara M. Kelly,
John Garrett,
Junjie Hu,
Steve Y. Cho,
Tyler J. Bradshaw
Abstract:
In this study, we aimed to determine if fine-tuned large language models (LLMs) can generate accurate, personalized impressions for whole-body PET reports. Twelve language models were trained on a corpus of PET reports using the teacher-forcing algorithm, with the report findings as input and the clinical impressions as reference. An extra input token encodes the reading physician's identity, allo…
▽ More
In this study, we aimed to determine if fine-tuned large language models (LLMs) can generate accurate, personalized impressions for whole-body PET reports. Twelve language models were trained on a corpus of PET reports using the teacher-forcing algorithm, with the report findings as input and the clinical impressions as reference. An extra input token encodes the reading physician's identity, allowing models to learn physician-specific reporting styles. Our corpus comprised 37,370 retrospective PET reports collected from our institution between 2010 and 2022. To identify the best LLM, 30 evaluation metrics were benchmarked against quality scores from two nuclear medicine (NM) physicians, with the most aligned metrics selecting the model for expert evaluation. In a subset of data, model-generated impressions and original clinical impressions were assessed by three NM physicians according to 6 quality dimensions (3-point scale) and an overall utility score (5-point scale). Each physician reviewed 12 of their own reports and 12 reports from other physicians. Bootstrap resampling was used for statistical analysis. Of all evaluation metrics, domain-adapted BARTScore and PEGASUSScore showed the highest Spearman's rank correlations (0.568 and 0.563) with physician preferences. Based on these metrics, the fine-tuned PEGASUS model was selected as the top LLM. When physicians reviewed PEGASUS-generated impressions in their own style, 89% were considered clinically acceptable, with a mean utility score of 4.08 out of 5. Physicians rated these personalized impressions as comparable in overall utility to the impressions dictated by other physicians (4.03, P=0.41). In conclusion, personalized impressions generated by PEGASUS were clinically useful, highlighting its potential to expedite PET reporting.
△ Less
Submitted 17 October, 2023; v1 submitted 18 September, 2023;
originally announced September 2023.
-
Approaches to lowering the cost of large space telescopes
Authors:
Ewan S Douglas,
Greg Aldering,
Greg W. Allan,
Ramya Anche,
Roger Angel,
Cameron C. Ard,
Supriya Chakrabarti,
Laird M. Close,
Kevin Derby,
Jerry Edelstein,
John Ford,
Jessica Gersh-Range,
Sebastiaan Y. Haffert,
Patrick J. Ingraham,
Hyukmo Kang,
Douglas M. Kelly,
Daewook Kim,
Michael Lesser,
Jarron M. Leisenring,
Yu-Chia Lin,
Jared R. Males,
Buddy Martin,
Bianca Alondra Payan,
Sai Krishanth P. M.,
David Rubin
, et al. (4 additional authors not shown)
Abstract:
New development approaches, including launch vehicles and advances in sensors, computing, and software, have lowered the cost of entry into space, and have enabled a revolution in low-cost, high-risk Small Satellite (SmallSat) missions. To bring about a similar transformation in larger space telescopes, it is necessary to reconsider the full paradigm of space observatories. Here we will review the…
▽ More
New development approaches, including launch vehicles and advances in sensors, computing, and software, have lowered the cost of entry into space, and have enabled a revolution in low-cost, high-risk Small Satellite (SmallSat) missions. To bring about a similar transformation in larger space telescopes, it is necessary to reconsider the full paradigm of space observatories. Here we will review the history of space telescope development and cost drivers, and describe an example conceptual design for a low cost 6.5 m optical telescope to enable new science when operated in space at room temperature. It uses a monolithic primary mirror of borosilicate glass, drawing on lessons and tools from decades of experience with ground-based observatories and instruments, as well as flagship space missions. It takes advantage, as do large launch vehicles, of increased computing power and space-worthy commercial electronics in low-cost active predictive control systems to maintain stability. We will describe an approach that incorporates science and trade study results that address driving requirements such as integration and testing costs, reliability, spacecraft jitter, and wavefront stability in this new risk-tolerant "LargeSat" context.
△ Less
Submitted 19 October, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
Discovery of Spherules of Likely Extrasolar Composition in the Pacific Ocean Site of the CNEOS 2014-01-08 (IM1) Bolide
Authors:
Abraham Loeb,
Toby Adamson,
Sophie Bergstrom,
Richard Cloete,
Shai Cohen,
Kevin Conrad,
Laura Domine,
Hairuo Fu,
Charles Hoskinson,
Eugenia Hyung,
Stein Jacobsen,
Mike Kelly,
Jason Kohn,
Edwin Lard,
Sebastian Lam,
Frank Laukien,
Jim Lem,
Rob McCallum,
Rob Millsap,
Christopher Parendo,
Michail Pataev,
Chaitanya Peddeti,
Jeff Pugh,
Shmuel Samuha,
Dimitar Sasselov
, et al. (9 additional authors not shown)
Abstract:
We have conducted an extensive towed-magnetic-sled survey during the period 14-28 June, 2023, over the seafloor centered around the calculated path of the bolide CNEOS 2014-01-08 (IM1) about 85 km north of Manus Island, Papua New Guinea. We found about 700 spherules of diameter 0.05-1.3 millimeters in our samples, of which 57 were analyzed so far. The spherules were significantly concentrated alon…
▽ More
We have conducted an extensive towed-magnetic-sled survey during the period 14-28 June, 2023, over the seafloor centered around the calculated path of the bolide CNEOS 2014-01-08 (IM1) about 85 km north of Manus Island, Papua New Guinea. We found about 700 spherules of diameter 0.05-1.3 millimeters in our samples, of which 57 were analyzed so far. The spherules were significantly concentrated along the expected meteor path. Mass spectrometry of 47 spherules near the high-yield regions along IM1's path reveals a distinct extra-solar abundance pattern for 5 of them, while background spherules have abundances consistent with a solar system origin. The unique spherules show an excess of Be, La and U, by up to three orders of magnitude relative to the solar system standard of CI chondrites. These "BeLaU"-type spherules, never seen before, also have very low refractory siderophile elements such as Re. Volatile elements, such as Mn, Zn, Pb, are depleted as expected from evaporation losses during a meteor's airburst. In addition, the mass-dependent variations in $^{57}$Fe/$^{54}$Fe and $^{56}$Fe/$^{54}$Fe are also consistent with evaporative loss of the light isotopes during the spherules' travel in the atmosphere. The "BeLaU" abundance pattern is not found in control regions outside of IM1's path and does not match commonly manufactured alloys or natural meteorites in the solar system. This evidence points towards an association of "BeLaU"-type spherules with IM1, supporting its interstellar origin independently of the high velocity and unusual material strength implied from the CNEOS data. We suggest that the "BeLaU" abundance pattern could have originated from a highly differentiated magma ocean of a planet with an iron core outside the solar system or from more exotic sources.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation
Authors:
K. McGee,
S. Kim,
K. Elliott,
A. Ganshyn,
W. Hartung,
P. Ostroumov,
A. Taylor,
T. Xu,
M. Martinello,
G. V. Eremeev,
A. Netepenko,
F. Furuta,
O. Melnychuk,
M. P. Kelly,
B. Guilfoyle,
T. Reid
Abstract:
Nitrogen-doping and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and fr…
▽ More
Nitrogen-doping and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and frequencies far from straightforward, and requires rigorous study. Upcoming high-Q0 continuous-wave linear accelerator projects, such as the proposed Michigan State University Facility for Rare Isotope Beam Energy Upgrade, and the underway Fermilab's Proton Improvement Plan-II, could benefit enormously from adapting these techniques to their beta_opt = 0.6 ~650 MHz 5-cell elliptical superconducting rf cavities, operating at an accelerating gradient of around ~17 MV/m. This is the first investigation of the adaptation of nitrogen doping and medium temperature furnace baking to prototype 644 MHz beta_opt = 0.65 cavities, with the aim of demonstrating the high-Q0 potential of these recipes in these novel cavities for future optimization as part of the FRIB400 project R&D. We find that nitrogen-doping delivers superior Q0, despite the sub-GHz operating frequency of these cavities, but is sensitive to the post-doping electropolishing removal step and experiences elevated residual resistance. Medium temperature furnace baking delivers reasonable performance with decreased residual resistance compared to the nitrogen doped cavity, but may require further recipe refinement. The gradient requirement for the FRIB400 upgrade project is comfortably achieved by both recipes.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity
Authors:
T. B. Petersen,
M. P. Kelly,
T. Reid,
M. Kedzie,
B. Guilfoyle,
G. Chen,
S. Posen,
B. Tennis,
G. Eremeev
Abstract:
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarte…
▽ More
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarter wave cavities (that are subsequently smaller) as well as for significantly lowered cooling requirements (possibly leading to cryocooler based designs). The fabrication, initial cold testing, and Nb3Sn coating are discussed as well as test plans and details of future applications.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Large-scale on-chip integration of gate-voltage addressable hybrid superconductor-semiconductor quantum wells field effect nano-switch arrays
Authors:
Kaveh Delfanazari,
Jiahui Li,
Peng Ma,
Reuben K. Puddy,
Teng Yi,
Yusheng Xiong,
Ian Farrer,
Sachio Komori,
Jason Robinson,
David A. Ritchie,
Michael J. Kelly,
Hannah J. Joyce,
Charles G. Smith
Abstract:
Stable, reproducible, scalable, addressable, and controllable hybrid superconductor-semiconductor (S-Sm) junctions and switches are key circuit elements and building blocks of gate-based quantum processors. The electrostatic field effect produced by the split gate voltages facilitates the realisation of nano-switches that can control the conductance or current in the hybrid S-Sm circuits based on…
▽ More
Stable, reproducible, scalable, addressable, and controllable hybrid superconductor-semiconductor (S-Sm) junctions and switches are key circuit elements and building blocks of gate-based quantum processors. The electrostatic field effect produced by the split gate voltages facilitates the realisation of nano-switches that can control the conductance or current in the hybrid S-Sm circuits based on 2D semiconducting electron systems. Here, we experimentally demonstrate a novel realisation of large-scale scalable, and gate voltage controllable hybrid field effect quantum chips. Each chip contains arrays of split gate field effect hybrid junctions, that work as conductance switches, and are made from In0.75Ga0.25As quantum wells integrated with Nb superconducting electronic circuits. Each hybrid junction in the chip can be controlled and addressed through its corresponding source-drain and two global split gate contact pads that allow switching between their (super)conducting and insulating states. We fabricate a total of 18 quantum chips with 144 field effect hybrid Nb- In0.75Ga0.25As 2DEG-Nb quantum wires and investigate the electrical response, switching voltage (on/off) statistics, quantum yield, and reproducibility of several devices at cryogenic temperatures. The proposed integrated quantum device architecture allows control of individual junctions in a large array on a chip useful for the development of emerging cryogenic nanoelectronics circuits and systems for their potential applications in fault-tolerant quantum technologies.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Capturing Humans' Mental Models of AI: An Item Response Theory Approach
Authors:
Markelle Kelly,
Aakriti Kumar,
Padhraic Smyth,
Mark Steyvers
Abstract:
Improving our understanding of how humans perceive AI teammates is an important foundation for our general understanding of human-AI teams. Extending relevant work from cognitive science, we propose a framework based on item response theory for modeling these perceptions. We apply this framework to real-world experiments, in which each participant works alongside another person or an AI agent in a…
▽ More
Improving our understanding of how humans perceive AI teammates is an important foundation for our general understanding of human-AI teams. Extending relevant work from cognitive science, we propose a framework based on item response theory for modeling these perceptions. We apply this framework to real-world experiments, in which each participant works alongside another person or an AI agent in a question-answering setting, repeatedly assessing their teammate's performance. Using this experimental data, we demonstrate the use of our framework for testing research questions about people's perceptions of both AI agents and other people. We contrast mental models of AI teammates with those of human teammates as we characterize the dimensionality of these mental models, their development over time, and the influence of the participants' own self-perception. Our results indicate that people expect AI agents' performance to be significantly better on average than the performance of other humans, with less variation across different types of problems. We conclude with a discussion of the implications of these findings for human-AI interaction.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies
Authors:
James Paul Mason,
Alexandra Werth,
Colin G. West,
Allison A. Youngblood,
Donald L. Woodraska,
Courtney Peck,
Kevin Lacjak,
Florian G. Frick,
Moutamen Gabir,
Reema A. Alsinan,
Thomas Jacobsen,
Mohammad Alrubaie,
Kayla M. Chizmar,
Benjamin P. Lau,
Lizbeth Montoya Dominguez,
David Price,
Dylan R. Butler,
Connor J. Biron,
Nikita Feoktistov,
Kai Dewey,
N. E. Loomis,
Michal Bodzianowski,
Connor Kuybus,
Henry Dietrick,
Aubrey M. Wolfe
, et al. (977 additional authors not shown)
Abstract:
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th…
▽ More
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Predicting community college astronomy performance through logistic regression
Authors:
Zachary Richards,
Angela M. Kelly
Abstract:
The present study examined demographic and academic predictors of astronomy performance of community college students enrolled in astronomy courses in a large suburban community college. The theoretical framework was based upon a deconstructive approach for predicting community college performance whereby students academic pathways through higher education institutions are examined to understand t…
▽ More
The present study examined demographic and academic predictors of astronomy performance of community college students enrolled in astronomy courses in a large suburban community college. The theoretical framework was based upon a deconstructive approach for predicting community college performance whereby students academic pathways through higher education institutions are examined to understand their dynamic interaction with institutional integration and progress towards academic goals. Transcript data analysis was employed to elicit student demographics and longitudinal academic coursework and performance. A logistic regression model was generated to identify significant predictors of astronomy performance which included mathematics achievement enrollment in remedial mathematics and enrollment in multiple astronomy courses. The results imply a greater focus on mathematics preparation and performance may mediate astronomy outcomes for community college students. Notably demographic variables including ethnicity socioeconomic status gender and age were not significant predictors of astronomy performance in the multivariable model suggesting the course is a potential gateway for diversifying STEM access. Also astronomy interest as measured by enrollment in multiple astronomy courses was related to performance. Further implications for practice are discussed.
△ Less
Submitted 19 April, 2023;
originally announced April 2023.
-
Advancements in Superconducting Microwave Cavities and Qubits for Quantum Information Systems
Authors:
Alex Krasnok,
Pashupati Dhakal,
Arkady Fedorov,
Pedro Frigola,
Michael Kelly,
Sergey Kutsaev
Abstract:
Superconducting microwave cavities with ultra-high Q-factors are revolutionizing the field of quantum computing, offering long coherence times exceeding 1 ms, which is critical for realizing scalable multi-qubit quantum systems with low error rates. In this work, we provide an in-depth analysis of recent advances in ultra-high Q-factor cavities, integration of Josephson junction-based qubits, and…
▽ More
Superconducting microwave cavities with ultra-high Q-factors are revolutionizing the field of quantum computing, offering long coherence times exceeding 1 ms, which is critical for realizing scalable multi-qubit quantum systems with low error rates. In this work, we provide an in-depth analysis of recent advances in ultra-high Q-factor cavities, integration of Josephson junction-based qubits, and bosonic-encoded qubits in 3D cavities. We examine the sources of quantum state dephasing caused by damping and noise mechanisms in cavities and qubits, highlighting the critical challenges that need to be addressed to achieve even higher coherence times. We critically survey the latest progress made in implementing single 3D qubits using superconducting materials, normal metals, and multi-qubit and multi-state quantum systems. Our work sheds light on the promising future of this research area, including novel materials for cavities and qubits, modes with nontrivial topological properties, error correction techniques for bosonic qubits, and new light-matter interaction effects.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
The James Webb Space Telescope Mission
Authors:
Jonathan P. Gardner,
John C. Mather,
Randy Abbott,
James S. Abell,
Mark Abernathy,
Faith E. Abney,
John G. Abraham,
Roberto Abraham,
Yasin M. Abul-Huda,
Scott Acton,
Cynthia K. Adams,
Evan Adams,
David S. Adler,
Maarten Adriaensen,
Jonathan Albert Aguilar,
Mansoor Ahmed,
Nasif S. Ahmed,
Tanjira Ahmed,
Rüdeger Albat,
Loïc Albert,
Stacey Alberts,
David Aldridge,
Mary Marsha Allen,
Shaune S. Allen,
Martin Altenburg
, et al. (983 additional authors not shown)
Abstract:
Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astrono…
▽ More
Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
MCTrans++: A 0-D Model for Centrifugal Mirrors
Authors:
Nick R. Schwartz,
Ian G. Abel,
Adil B. Hassam,
Myles Kelly,
Carlos A. Romero-Talamas
Abstract:
The centrifugal mirror confinement scheme incorporates supersonic rotation of a plasma into a magnetic mirror device. This concept has been shown experimentally to drastically decrease parallel losses and increase plasma stability as compared to prior axisymmetric mirrors. MCTrans++ is a 0D scoping tool which rapidly models experimental operating points in the Centrifugal Mirror Fusion Experiment…
▽ More
The centrifugal mirror confinement scheme incorporates supersonic rotation of a plasma into a magnetic mirror device. This concept has been shown experimentally to drastically decrease parallel losses and increase plasma stability as compared to prior axisymmetric mirrors. MCTrans++ is a 0D scoping tool which rapidly models experimental operating points in the Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland. In the low-collisionality regime, parallel losses can be modeled analytically. A confining potential is set up that is partially ambipolar and partially centrifugal. Due to the stabilizing effects of flow-shear, the perpendicular losses can be modeled as classical. Radiation losses such as Bremsstrahlung and cyclotron emission are taken into account. A neutrals model is included, and, in some circumstances, charge-exchange losses are found to exceed all other loss mechanisms. We use the SUNDIALS ARKODE library to solve the underlying equations of this model; the resulting software is suitable for scanning large parameter spaces, and can also be used to model time-dependent phenomena such as a capacitive discharge. MCTrans++ has been used to verify results from prior centrifugal mirrors, create an experimental plan for CMFX, and find configurations for future reactor-scale fusion devices.
△ Less
Submitted 11 March, 2024; v1 submitted 3 April, 2023;
originally announced April 2023.
-
JWST Observations of the Enigmatic Y Dwarf WISE 1828+2650: I. Limits to a Binary Companion
Authors:
Matthew De Furio,
Ben W. Lew,
Charles A. Beichman,
Thomas Roellig,
Geoffrey Bryden,
David R. Ciardi,
Michael R. Meyer,
Marcia J. Rieke,
Alexandra Z. Greenbaum,
Jarron Leisenring,
Jorge Llop-Sayson,
Marie Ygouf,
Loïc Albert,
Martha L. Boyer,
Daniel J. Eisenstein,
Klaus W. Hodapp,
Scott Horner,
Doug Johnstone,
Douglas M. Kelly,
Karl A. Misselt,
George H. Rieke,
John A. Stansberry,
Erick T. Young
Abstract:
The Y-dwarf WISE 1828+2650 is one of the coldest known Brown Dwarfs with an effective temperature of $\sim$300 K. Located at a distance of just 10 pc, previous model-based estimates suggest WISE1828+2650 has a mass of $\sim$5-10 Mj, making it a valuable laboratory for understanding the formation, evolution and physical characteristics of gas giant planets. However, previous photometry and spectros…
▽ More
The Y-dwarf WISE 1828+2650 is one of the coldest known Brown Dwarfs with an effective temperature of $\sim$300 K. Located at a distance of just 10 pc, previous model-based estimates suggest WISE1828+2650 has a mass of $\sim$5-10 Mj, making it a valuable laboratory for understanding the formation, evolution and physical characteristics of gas giant planets. However, previous photometry and spectroscopy have presented a puzzle with the near-impossibility of simultaneously fitting both the short (0.9-2.0 microns) and long wavelength (3-5 microns) data. A potential solution to this problem has been the suggestion that WISE 1828+2650 is a binary system whose composite spectrum might provide a better match to the data. Alternatively, new models being developed to fit JWST/NIRSpec and MIRI spectroscopy might provide new insights. This article describes JWST/NIRCam observations of WISE 1828+2650 in 6 filters to address the binarity question and to provide new photometry to be used in model fitting. We also report Adaptive Optics imaging with the Keck 10 m telescope. We find no evidence for multiplicity for a companion beyond 0.5 AU with either JWST or Keck. Companion articles will present low and high resolution spectra of WISE 1828+2650 obtained with both NIRSpec and MIRI.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Ambipolar Heating of Magnetars
Authors:
Sachiko Tsuruta,
Madeline J. Kelly,
Ken'ichi Nomoto,
Kanji Mori,
Marcus Teter,
Andrew C. Liebmann
Abstract:
Magnetars, neutron stars thought to be with ultra-strong magnetic fields of $10^{14 - 15}$ G, are observed to be much hotter than ordinary pulsars with $\sim 10^{12}$ G, and additional heating sources are required. One possibility is heating by the ambipolar diffusion in the stellar core. This scenario is examined by calculating the models using the relativistic thermal evolutionary code without m…
▽ More
Magnetars, neutron stars thought to be with ultra-strong magnetic fields of $10^{14 - 15}$ G, are observed to be much hotter than ordinary pulsars with $\sim 10^{12}$ G, and additional heating sources are required. One possibility is heating by the ambipolar diffusion in the stellar core. This scenario is examined by calculating the models using the relativistic thermal evolutionary code without making the isothermal approximation. The results show that this scenario can be consistent with most of the observed magnetar temperature data.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
NIRCam Performance on JWST In Flight
Authors:
Marcia J. Rieke,
Douglas M. Kelly,
Karl Misselt,
John Stansberry,
Martha Boyer,
Thomas Beatty,
Eiichi Egami,
Michael Florian,
Thomas P. Greene,
Kevin Hainline
Abstract:
The Near Infrared Camera for the James Webb Space Telescope is delivering the imagery that astronomers have hoped for ever since JWST was proposed back in the 1990s. In the Commissioning Period that extended from right after launch to early July 2022 NIRCam has been subjected to a number of performance tests and operational checks. The camera is exceeding pre-launch expectations in virtually all a…
▽ More
The Near Infrared Camera for the James Webb Space Telescope is delivering the imagery that astronomers have hoped for ever since JWST was proposed back in the 1990s. In the Commissioning Period that extended from right after launch to early July 2022 NIRCam has been subjected to a number of performance tests and operational checks. The camera is exceeding pre-launch expectations in virtually all areas with very few surprises discovered in flight. NIRCam also delivered the imagery needed by the Wavefront Sensing Team for use in aligning the telescope mirror segments (\citealt{Acton_etal2022}, \citealt{McElwain_etal2022}).
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Aggregator Reuse and Extension for Richer Web Archive Interaction
Authors:
Mat Kelly
Abstract:
Memento aggregators enable users to query multiple web archives for captures of a URI in time through a single HTTP endpoint. While this one-to-many access point is useful for researchers and end-users, aggregators are in a position to provide additional functionality to end-users beyond black box style aggregation. This paper identifies the state-of-the-art of Memento aggregation, abstracts its p…
▽ More
Memento aggregators enable users to query multiple web archives for captures of a URI in time through a single HTTP endpoint. While this one-to-many access point is useful for researchers and end-users, aggregators are in a position to provide additional functionality to end-users beyond black box style aggregation. This paper identifies the state-of-the-art of Memento aggregation, abstracts its processes, highlights shortcomings, and offers systematic enhancements.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
Variable-Based Calibration for Machine Learning Classifiers
Authors:
Markelle Kelly,
Padhraic Smyth
Abstract:
The deployment of machine learning classifiers in high-stakes domains requires well-calibrated confidence scores for model predictions. In this paper we introduce the notion of variable-based calibration to characterize calibration properties of a model with respect to a variable of interest, generalizing traditional score-based metrics such as expected calibration error (ECE). In particular, we f…
▽ More
The deployment of machine learning classifiers in high-stakes domains requires well-calibrated confidence scores for model predictions. In this paper we introduce the notion of variable-based calibration to characterize calibration properties of a model with respect to a variable of interest, generalizing traditional score-based metrics such as expected calibration error (ECE). In particular, we find that models with near-perfect ECE can exhibit significant miscalibration as a function of features of the data. We demonstrate this phenomenon both theoretically and in practice on multiple well-known datasets, and show that it can persist after the application of existing calibration methods. To mitigate this issue, we propose strategies for detection, visualization, and quantification of variable-based calibration error. We then examine the limitations of current score-based calibration methods and explore potential modifications. Finally, we discuss the implications of these findings, emphasizing that an understanding of calibration beyond simple aggregate measures is crucial for endeavors such as fairness and model interpretability.
△ Less
Submitted 5 April, 2023; v1 submitted 29 September, 2022;
originally announced September 2022.
-
Study on Electropolishing Conditions for 650 MHz Niobium SRF Cavity
Authors:
V. Chouhan,
D. Bice,
F. Furuta,
M. Martinello,
M. K. Ng,
H. Park,
T. Ring,
G. Wu,
B. Guilfoyle,
M. P. Kelly,
T. Reid
Abstract:
The PIP II linear accelerator includes different types of niobium SRF cavities including 650 MHz elliptical low (0.61) and high (0.92) beta cavities. The elliptical cavity surface is processed with the electropolishing method. The elliptical cavities especially the low-$β$ 650 MHz cavities showed a rough equator surface after the EP was per-formed with the standard EP conditions. This work was foc…
▽ More
The PIP II linear accelerator includes different types of niobium SRF cavities including 650 MHz elliptical low (0.61) and high (0.92) beta cavities. The elliptical cavity surface is processed with the electropolishing method. The elliptical cavities especially the low-$β$ 650 MHz cavities showed a rough equator surface after the EP was per-formed with the standard EP conditions. This work was focused to study the effect of different EP parameters, including cathode surface area, temperature and voltage, and optimize them to improve the cavity surface.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.