Showing 1–50 of 57 results for author: Katsuragi, H

Dislocation Glides in Monolayered Granular Media: Effect of Lattice Constant

Authors: Fumiaki Nakai, Takashi Uneyama, Yuto Sasaki, Kiwamu Yoshii, Hiroaki Katsuragi

Abstract: A recent study demonstrated that granular crystals containing a single dislocation exhibit dislocation glide analogous to that observed in atomic-scale crystals, resulting in plastic deformation at yield stresses several orders of magnitude lower than those of dislocation-free crystals. The yielding behavior strongly depends on the interparticle friction coefficient $μ$: dislocation glide occurs f… ▽ More A recent study demonstrated that granular crystals containing a single dislocation exhibit dislocation glide analogous to that observed in atomic-scale crystals, resulting in plastic deformation at yield stresses several orders of magnitude lower than those of dislocation-free crystals. The yielding behavior strongly depends on the interparticle friction coefficient $μ$: dislocation glide occurs for friction coefficients below a critical value $μ_c$, while crystalline order deteriorates above $μ_c$. In this work, we use discrete element method simulations to systematically investigate how the lattice constant, which determines the interparticle spacing and is a fundamental parameter in microscopic crystalline solids, and the friction coefficient $μ$ influence the yielding behavior in monolayered granular crystals with dislocation. By decreasing the lattice constant, we find an increase in the critical friction coefficient $μ_c$, allowing dislocation glide to persist at higher friction values. Furthermore, we observe a linear scaling of yield stress with normal stress, except at extremely low friction coefficients. △ Less

Submitted 17 May, 2025; originally announced May 2025.

Comments: 5 pages, 4 figures, This paper is scheduled to be published in "EPJ Web of Conferences'' (Powders \& Grains 2025, 8-12 December, Goa, India)

Origin of slow earthquake statistics in low-friction soft granular shear

Authors: Yuto Sasaki, Hiroaki Katsuragi

Abstract: Slow earthquakes differ from regular earthquakes in their slower moment release and limited size distribution. What mechanisms cause slow earthquakes that manifest these unique statistics? We experimentally demonstrate that their characteristics emerge from low-friction soft granular shear. Using a hydrogel particle layer floated on lubricating fluid, we conducted stick-slip experiments. The obser… ▽ More Slow earthquakes differ from regular earthquakes in their slower moment release and limited size distribution. What mechanisms cause slow earthquakes that manifest these unique statistics? We experimentally demonstrate that their characteristics emerge from low-friction soft granular shear. Using a hydrogel particle layer floated on lubricating fluid, we conducted stick-slip experiments. The observed slip events follow the same laws of both moment release rate and size distribution as slow earthquakes, contrasting with frictional rigid granular shear. Slip size is determined by the competing effects of shear localization and pressure enhancement with decreasing porosity. These findings indicate that low friction and particle softness in sheared granular systems with monotonous structures cause slow earthquake statistics, which may monitor pore fluid dynamics and shear localization within hazardous fault zones. △ Less

Submitted 3 February, 2025; originally announced February 2025.

Comments: 41 pages, 13 figures. To be submitted

Liquid water transport model in hydrophilic granular : Preliminary validation with drying rate of hierarchical granular

Authors: Hyuga Yasuda, Hiroaki Katsuragi, Makoto Katsura

Abstract: The drying rate profile of granular beds can be divided into the constant rate period (CRP), which is characterized by a nearly constant drying rate, and the falling rate period (FRP), in which the drying rate rapidly decays. In order to explain this behavior quantitatively, we proposed a simple one-dimensional power law model in which the product of the water permeability and the pressure gradien… ▽ More The drying rate profile of granular beds can be divided into the constant rate period (CRP), which is characterized by a nearly constant drying rate, and the falling rate period (FRP), in which the drying rate rapidly decays. In order to explain this behavior quantitatively, we proposed a simple one-dimensional power law model in which the product of the water permeability and the pressure gradient is assumed to be proportional to the cube of the saturation. To test this model, we measured the drying rates of glass beads and hierarchical granular materials produced by sintering and breaking glass beads. Our results and those of previous experiments showed consistency with the power law. The obtained proportional constant of the experimental power law also shows a rough agreement with that estimated from previous studies on water permeability and capillary pressure. Drying behavior in FRP also agrees with our model in some points. The remnant deviation of the model from experimental results may be attributed to the inhomogeneity of granular media, which was qualitatively verified. △ Less

Submitted 22 January, 2025; originally announced January 2025.

Comments: 23 pages, 18 figures, to be published in Physical Review Fluids

Dislocation Glides in Granular Media

Authors: Fumiaki Nakai, Takashi Uneyama, Yuto Sasaki, Kiwamu Yoshii, Hiroaki Katsuragi

Abstract: Atomic crystals with dislocations deform plastically at low stresses via dislocation glide. Whether dislocation glide occurs in macroscopic frictional granular media has remained unknown. The discrete element method is employed to simulate the structural and mechanical responses of a granular crystal with an edge dislocation. We find that dislocation glide occurs at low interparticle friction, res… ▽ More Atomic crystals with dislocations deform plastically at low stresses via dislocation glide. Whether dislocation glide occurs in macroscopic frictional granular media has remained unknown. The discrete element method is employed to simulate the structural and mechanical responses of a granular crystal with an edge dislocation. We find that dislocation glide occurs at low interparticle friction, resulting in significantly lower yield stresses than in dislocation-free crystals. Yield stress varies linearly with interparticle friction, attributed to both Peierls stress and frictional effect. △ Less

Submitted 26 October, 2024; originally announced October 2024.

Comments: 5 pages, 4 figures

Tip angle dependence for resistive force into dry granular materials at shallow cone penetration

Authors: Naoki Iikawa, Hiroaki Katsuragi

Abstract: In relation to the interaction of the earth's surface with machines and organisms, and its engineering applications, there has been a recent increase in interest in the penetration resistive force into granular materials at shallow depths. Previous studies have proposed various models for penetration resistive forces into dry granular materials. This study focuses on the model which has a coeffici… ▽ More In relation to the interaction of the earth's surface with machines and organisms, and its engineering applications, there has been a recent increase in interest in the penetration resistive force into granular materials at shallow depths. Previous studies have proposed various models for penetration resistive forces into dry granular materials. This study focuses on the model which has a coefficient depending on the angle of repose and the increase of resistive force in proportion to the penetration volume. In the previous studies, the model has been validated for several geometries such as cylinders, cones, and spheres. However, for cones, the model has only been validated under conditions of a tip angle close to the angle of repose. In this study, the effect of cone tip angle on penetration resistive force is investigated under several conditions with different angles of repose. This study carries out cone penetration simulations using the discrete element method. For the cone geometry, five tip angles ranging from sharp to blunt (tip angles are 15, 30, 45, 60, 75 deg) are used. The simulation results show that the penetration resistive forces for blunt cones are much higher than that computed by the model. To solve the discrepancy between the model and simulation results, this study modifies the model by assuming that the stagnant zone formed in front of the cone penetrating the granular material behaves as an effective cone. Thereby, the proposed model can calculate penetration resistive forces more accurately for cones with a wider range of tip angles than in the previous model. △ Less

Submitted 21 September, 2024; originally announced September 2024.

Comments: 6 pages, 5 figures, Proceedings of the 21st International and 12th Asia-Pacific Regional Conference of the ISTVS

Air jet impact craters on granular surfaces: a universal scaling

Authors: Prasad Sonar, Hiroaki Katsuragi

Abstract: Craters form as the lander's exhaust interacts with the planetary surfaces. Understanding this phenomenon is imperative to ensure safe landings. We investigate crater morphology, where a turbulent air jet impinges on the granular surfaces. To reveal the fundamental aspect of this phenomenon, systematic experiments are performed with various air jet velocities, nozzle positions, and grain propertie… ▽ More Craters form as the lander's exhaust interacts with the planetary surfaces. Understanding this phenomenon is imperative to ensure safe landings. We investigate crater morphology, where a turbulent air jet impinges on the granular surfaces. To reveal the fundamental aspect of this phenomenon, systematic experiments are performed with various air jet velocities, nozzle positions, and grain properties. The resultant crater morphology is characterized by an aspect ratio. We find a universal scaling law in which the aspect ratio is scaled by the dimensionless variable consisting of air velocity at the nozzle, speed of sound in air, nozzle diameter, nozzle tip distance from the surface, grain diameter, the density of grains, and density of air. The obtained scaling reveals the crossover of the length scales governing crater aspect ratio, providing a useful guideline for ensuring safe landings. Moreover, we report a novel drop shaped subsurface cratering phenomenon. △ Less

Submitted 23 October, 2024; v1 submitted 8 September, 2024; originally announced September 2024.

Comments: 18 pages, 12 figures

Drop impact on wet granular beds: water-content effects on the cratering

Authors: Wei Zhang, Hiroaki Katsuragi, Ken Yamamoto

Abstract: Drop impact events on wet granular bed show rich variety by changing the substrate composition. We observe the drop impact onto dry/wet granular substrates with different grain size (50-400 μm) and water content (0-22 vol %). Although the impactor condition is fixed (impact velocity: 4.0 m/s, water drop radius: 1.8 mm), the experiment reveals that the post-impact behaviors of both impactor and tar… ▽ More Drop impact events on wet granular bed show rich variety by changing the substrate composition. We observe the drop impact onto dry/wet granular substrates with different grain size (50-400 μm) and water content (0-22 vol %). Although the impactor condition is fixed (impact velocity: 4.0 m/s, water drop radius: 1.8 mm), the experiment reveals that the post-impact behaviors of both impactor and target are strongly affected by the substrate composition. We sort these behaviors into several phases regarding liquid splashing and crater shapes left after the event. As these phases show relevance each other, we measure the mechanical characteristics of the substrates and find that the onset of splashing and particle ejection are explained by a fracture of the substrate. Furthermore, we discuss several timescales of the event to understand more detailed phase separations. Consequently, we find that the splashing phase and the crater shape are determined by a competition of the timescales of impact, penetration, and contact. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: 14 pages, 10 figures

Journal ref: Soft Matter 20, 6120-6130 (2024)

Energy dissipation of a sphere rolling up a granular slope: slip and deformation of granular surface

Authors: Takeshi Fukumoto, Ken Yamamoto, Makoto Katsura, Hiroaki Katsuragi

Abstract: We experimentally investigate the dynamics of a sphere rolling up a granular slope. During the rolling-up motion, the sphere experiences slipping and penetration (groove formation) on the surface of the granular layer. The former relates to the stuck motion of the rolling sphere, and the latter causes energy dissipation due to the deformation of the granular surface. To characterize these phenomen… ▽ More We experimentally investigate the dynamics of a sphere rolling up a granular slope. During the rolling-up motion, the sphere experiences slipping and penetration (groove formation) on the surface of the granular layer. The former relates to the stuck motion of the rolling sphere, and the latter causes energy dissipation due to the deformation of the granular surface. To characterize these phenomena, we measured the motion of a sphere rolling up a granular slope of angle $α$. The initial velocity $v_0$, initial angular velocity $ω_0$, angle of slope $α$, and density of the sphere $ρ_s$ were varied. As a result, the penetration depth can be scaled solely by the density ratio between the sphere and granular layer. By considering the rotational equation of motion, we estimate the friction due to the slips. Besides, by considering energy conservation, we define and estimate the friction due to groove formation. Moreover, the translational friction is proportional to the penetration depth. Using these results, we can quantitatively predict the sphere's motion including stuck behavior. △ Less

Submitted 5 December, 2023; v1 submitted 15 May, 2023; originally announced May 2023.

Disordering two-dimensional magnet-particle configurations using bidispersity

Authors: K. Tsuchikusa, K. Yamamoto, M. Katsura, C. T. de Paula, J. A. C. Modesto, S. Dorbolo, F. Pacheco-Vázquez, Y. D. Sobral, H. Katsuragi

Abstract: In various types of many-particle systems, bidispersity is frequently used to avoid spontaneous ordering in particle configuration. In this study, the relation between bidispersity and disorder degree of particle configuration is investigated. By using magnetic dipole-dipole interaction, magnet particles are dispersed in a two-dimensional cell without physical contact between them. In this magneti… ▽ More In various types of many-particle systems, bidispersity is frequently used to avoid spontaneous ordering in particle configuration. In this study, the relation between bidispersity and disorder degree of particle configuration is investigated. By using magnetic dipole-dipole interaction, magnet particles are dispersed in a two-dimensional cell without physical contact between them. In this magnetic system, bidispersity is introduced by mixing large and small magnets. Then, the particle system is compressed to produce a uniform particle configuration. The compressed particle configuration is analyzed by using Voronoi tessellation for evaluating the disorder degree which strongly depends on bidispersity. Specifically, standard deviation and skewness of the Voronoi cell area distribution are measured. As a result, we find that the peak of standard deviation is observed when the numbers of large and small particles are almost identical. Although the skewness shows non-monotonic behavior, zero skewness state (symmetric distribution) can be achieved when the numbers of large and small particles are identical. In this ideally random (disordered) state, the ratio between pentagonal, hexagonal, and heptagonal Voronoi cells become roughly identical, while hexagons are dominant in monodisperse (ordered) condition. The relation between Voronoi cell analysis and the global bond orientational order parameter is also discussed. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Comments: 9 pages, 10 figures

Fracturing-induced fluidization of vibrated fine-powder column

Authors: Prasad Sonar, Hiroaki Katsuragi

Abstract: We experimentally investigate the effect of vertical vibrations on the brittle behavior of fine cohesive powders consisting of glass beads of 5 microns in diameter. This is an attempt to understand the sole role of vibrations in fluidizing Geldart's group C powders, which is known for posing difficulty while fluidization. We find that the cohesive powder column can be compacted, fractured, and eff… ▽ More We experimentally investigate the effect of vertical vibrations on the brittle behavior of fine cohesive powders consisting of glass beads of 5 microns in diameter. This is an attempt to understand the sole role of vibrations in fluidizing Geldart's group C powders, which is known for posing difficulty while fluidization. We find that the cohesive powder column can be compacted, fractured, and effectively fluidized by increasing the strengths of external vibrations. This process of vibration-induced fracturing is summarized in a full experimental phase diagram showing four distinct phases of the vibrated powder column: consolidation (CS), static fracture (SF), dynamic fracture (DF), and convective fracture (CF). We find that the boundary separating the consolidated and fracture regimes depends on the dimensionless shaking strength, S. However, in the DF regime, the decompaction wave propagation speed normalized to gravitational speed is found to be independent of S. In order to reach our ultimate goal of effective fluidization of group C powders, we explore geometrical parameters like container shapes, sizes, and base conditions. We find that the circular cylinder with hemispherical base condition is the most effective container in order to achieve effective fluidization of group C powders when vibrated. △ Less

Submitted 7 March, 2023; v1 submitted 8 August, 2022; originally announced August 2022.

Decompaction-wave propagation in a vibrated fine powder bed

Authors: Prasad Sonar, Hiroaki Katsuragi

Abstract: We experimentally study the crack formation and decompaction-wave propagating in a vibrated powder bed consisting of glass beads of 5 μm in diameter. The vibrated powder bed exhibits three distinct phases depending on the vibration conditions: consolidation (CS), static fracture (SF), and dynamic fracture (DF). Particularly, we found an upward wave propagation in the DF regime when the powder bed… ▽ More We experimentally study the crack formation and decompaction-wave propagating in a vibrated powder bed consisting of glass beads of 5 μm in diameter. The vibrated powder bed exhibits three distinct phases depending on the vibration conditions: consolidation (CS), static fracture (SF), and dynamic fracture (DF). Particularly, we found an upward wave propagation in the DF regime when the powder bed is strongly vibrated. As a remarkable feature, we found that in fine cohesive powders, the decompaction-wave propagation speed normalized to gravitational speed is independent of the shaking strength. This result implies that the wave propagation speed is governed by the balance between gravity and cohesion effect rather than vibration strength. We also explore the universality of wave propagation phenomenon in coarser and low-density granular powders. △ Less

Submitted 18 July, 2022; originally announced July 2022.

Impact drag force exerting on a projectile penetrating into a hierarchical granular bed

Authors: F. Okubo, H. Katsuragi

Abstract: Impact of a solid object onto a small-body surface can be modeled by the solid impact onto a hierarchically structured granular target. Impact drag force model for the hierarchically structured granular target is developed based on the experiment. We perform a set of granular impact experiments in which mechanical strength and porosity of target grains are systematically varied. Tiny glass beads (… ▽ More Impact of a solid object onto a small-body surface can be modeled by the solid impact onto a hierarchically structured granular target. Impact drag force model for the hierarchically structured granular target is developed based on the experiment. We perform a set of granular impact experiments in which mechanical strength and porosity of target grains are systematically varied. Tiny glass beads ($5$~$μ$m in diameter) are agglomerated to form porous grains of $2$--$4$~mm in diameter. Then, the grains are sintered to control their strength. A polyethylene sphere ($12.7$~mm in diameter) is dropped onto a hierarchical granular target consisting of these porous grains. Motion of the penetrating sphere is captured by a high-speed camera and analyzed. We find that impact drag force produced by the hierarchically structured granular target can be modeled by the sum of inertial drag and depth-proportional drag. The depth-proportional drag in hierarchical granular impact is much greater than that of the usual granular target consisting of rigid grains. The ratio between grain strength and impact dynamic pressure is a key dimensionless parameter to characterize this extraordinary large depth-proportional drag. Grain fracturing plays an important role in the impact dynamics when the impact dynamic pressure is sufficiently larger than the grain strength. This implies that the effect of grain fracturing should be considered also for the impact on a small body. Perhaps, effective strength of the surface grains can be estimated based on the kinematic observation of the intrusion or touchdown of the planetary explorator. △ Less

Submitted 23 June, 2022; v1 submitted 2 June, 2022; originally announced June 2022.

Comments: 9 pages, 8 figures, 2 tables

Journal ref: A&A 664, A147 (2022)

Grain-size dependence of water retention in a model aggregated soil

Authors: H. Yasuda, M. Katsura, H. Katsuragi

Abstract: We experimentally examined the amount of water retention in a model soil composed of aggregated glass beads. The model soil was characterized by two size parameters: size of aggregates $D$ and size of monomer particles (composing aggregates) $d$. In the experiment, water was sprinkled on the model-soil system that has an open top surface and drainable sieve bottom. When the sprinkled water amount… ▽ More We experimentally examined the amount of water retention in a model soil composed of aggregated glass beads. The model soil was characterized by two size parameters: size of aggregates $D$ and size of monomer particles (composing aggregates) $d$. In the experiment, water was sprinkled on the model-soil system that has an open top surface and drainable sieve bottom. When the sprinkled water amount exceeded a threshold (retainable limit), draining flux balanced with the sprinkled flux. The weight variations of retained and drained water were measured to confirm this balanced (steady) state and quantify the retained water. We defined the weight of the retained water in this steady state as $W_0$ and examined the relationship among $W_0$, $d$ and $D$. As a result, it was revealed that $W_0$ increases as $d$ decreases simply due to the capillary effects. Regarding $D$ dependence, it turned out that $W_0$ becomes the maximum around $D\simeq 500$~$μ$m. The value of $D$ maximizing water retention is determined by the void formation due to the aggregated structure, capillary effect, and gravity. △ Less

Submitted 24 November, 2022; v1 submitted 2 June, 2022; originally announced June 2022.

Comments: 7 pages, 8 figures

History-dependent deformation of a rotated granular pile governed by granular friction

Authors: T. Irie, R. Yamaguchi, S. Watanabe, H. Katsuragi

Abstract: We experimentally examined the history dependence of the rotation-induced granular deformation. As an initial state, we prepared a quasi-two-dimensional granular pile whose apex is at the rotational axis and its initial inclination is at the angle of repose. The rotation rate was increased from $0$ to $620$~(rpm) and then decreased back to $0$. During the rotation, deformation of the rotated granu… ▽ More We experimentally examined the history dependence of the rotation-induced granular deformation. As an initial state, we prepared a quasi-two-dimensional granular pile whose apex is at the rotational axis and its initial inclination is at the angle of repose. The rotation rate was increased from $0$ to $620$~(rpm) and then decreased back to $0$. During the rotation, deformation of the rotated granular pile was captured by a camera. From the acquired image data, granular friction coefficient $μ$ was measured as a function of the ratio between centrifugal force and gravity, $Γ$. To systematically evaluate the variation of $μ$ both in the increasing (spinning up) and decreasing (spinning down) rotation-rate regimes, surface profiles of the deformed granular piles were fitted to a model considering the force balance among gravity, friction, and centrifugal force at the surface. We found that $μ$ value grows in the increasing $Γ$ regime. However, when $Γ$ was reduced, $μ$ cannot recover its initial value. A part of the history-dependent behaviors of the rotated granular pile can be understood by the force balance model. △ Less

Submitted 2 June, 2022; v1 submitted 5 December, 2021; originally announced December 2021.

Comments: 11 pages, 10 figures

History-dependent growth and reduction of the ripples formed on a swept granular track

Authors: S. Hata, M. Katsura, H. Katsuragi

Abstract: When a solid object or wheel is repeatedly dragged on a dry sandy surface, ripple patterns are formed. Although the conditions to form ripple patterns have been studied well, methods to eliminate the developed ripple patterns have not been understood thus far. Therefore, history-dependent stability of the ripple patterns formed on a sandy surface is investigated in this study. First, the ripple pa… ▽ More When a solid object or wheel is repeatedly dragged on a dry sandy surface, ripple patterns are formed. Although the conditions to form ripple patterns have been studied well, methods to eliminate the developed ripple patterns have not been understood thus far. Therefore, history-dependent stability of the ripple patterns formed on a sandy surface is investigated in this study. First, the ripple patterns are formed by sweeping the flat sandy surface with a flexible plow at a constant speed. Then, the sweeping speed is reduced, and the variation of ripple patterns is measured. As a result, we find that the ripple patterns show hysteresis. Specifically, the increase in amplitude of ripples is observed when the reduced velocity is close to the initial velocity forming the ripple pattern. In addition, splitting of ripples is found when the reduced velocity is further decreased. From a simple analysis of the plow's motion, we discuss the physical mechanism of the ripple splitting. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Comments: 7 pages, 12 figures

Deformation of a rotated granular pile governed by body-force-dependent friction

Authors: T. Irie, R. Yamaguchi, S. Watanabe, H. Katsuragi

Abstract: Although the gravity dependence of granular friction is crucial to understand various natural phenomena, its precise characterization is difficult. We propose a method to characterize granular friction under various gravity (body force) conditions controlled by centrifugal force; specifically, the deformation of a rotated granular pile was measured. To understand the mechanics governing the observ… ▽ More Although the gravity dependence of granular friction is crucial to understand various natural phenomena, its precise characterization is difficult. We propose a method to characterize granular friction under various gravity (body force) conditions controlled by centrifugal force; specifically, the deformation of a rotated granular pile was measured. To understand the mechanics governing the observed nontrivial deformation of this pile, we introduced an analytic model considering local force balance. The excellent agreement between the experimental data and theoretical model suggests that the deformation is simply governed by the net body force (sum of gravity and centrifugal force) and friction angle. The body-force dependence of granular friction was precisely measured from the experimental results. The results reveal that the grain shape affects the degree of body-force dependence of the granular friction. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Comments: 10 pages, 5 figures

Measurement of surface deformation and cohesion of a granular pile under the effect of centrifugal force

Authors: T. i Irie, R. Yamaguchi, S. Watanabe, H. Katsuragi

Abstract: An experimental apparatus measuring free-surface deformation of a centrifuged granular pile is developed. By horizontally rotating a quasi two-dimensional granular pile whose apex is located at the vertical rotation axis, the resultant force of gravity and centrifuge yields the deformation of the granular pile. In this setup, centrifugal force depends on distance from the rotation axis whilst grav… ▽ More An experimental apparatus measuring free-surface deformation of a centrifuged granular pile is developed. By horizontally rotating a quasi two-dimensional granular pile whose apex is located at the vertical rotation axis, the resultant force of gravity and centrifuge yields the deformation of the granular pile. In this setup, centrifugal force depends on distance from the rotation axis whilst gravitational force is constant everywhere. Therefore, free-surface deformation by various centrifuge degrees can be systematically examined using this apparatus. In the system, a small unit consisting of a camera and computer is rotated with the granular sample to record the rotation-induced deformation. To evaluate the validity of the system, deformation of a rotated water surface is first measured and analyzed. The obtained data are properly explained by the theoretical parabolas without any fitting parameter. Next, we measure the deformation of non-cohesive and cohesive granular piles using the developed apparatus. Both granular samples show the significant deformation of granular pile and finally develop steep granular slopes on the side walls. However, details of the deformation processes depend on the cohesion strength. To quantitatively characterize the difference, the effective strength by cohesion and granular local-slope variations are analyzed based on the experimental results. △ Less

Submitted 9 May, 2021; originally announced May 2021.

Comments: 17 pages, 9 figures

Grain size effect on the compression and relaxation of a granular column: solid particles vs dust agglomerates

Authors: Felipe Pacheco-Vázquez, Tomomi Omura, Hiroaki Katsuragi

Abstract: We studied experimentally the effect of grain size and maximum load on the compaction and subsequent relaxation of a granular column when it is subjected to vertical uniaxial compression. The experiments were performed using two different types of grains: 1) solid glass beads, and 2) porous beads that consist of agglomerates of glass powder. We found that the compression force increases non-linear… ▽ More We studied experimentally the effect of grain size and maximum load on the compaction and subsequent relaxation of a granular column when it is subjected to vertical uniaxial compression. The experiments were performed using two different types of grains: 1) solid glass beads, and 2) porous beads that consist of agglomerates of glass powder. We found that the compression force increases non-linearly with time, with sudden drops for the case of glass beads and periodic undulations for dust particles. Whereas the grain size effect is small in the average force load, the fluctuations become larger as the grain size increases. On the other hand, the relaxation process is well described by the Maxwell model with three different relaxation time scales. △ Less

Submitted 3 March, 2021; v1 submitted 2 March, 2021; originally announced March 2021.

Comments: 4 pages, 5 figures, Manuscript subitted to EPJWC-P&G2021

Undulating compression and multi-stage relaxation in a granular column consisting of dust particles or glass beads

Authors: Felipe Pacheco-Vázquez, Tomomi Omura, Hiroaki Katsuragi

Abstract: For fundamentally characterizing the effect of hierarchical structure in granular matter, a set of compression-relaxation tests for dust particles and glass beads confined in a cylindrical cell was performed. Typical diameter of both grains is approximately 1~mm. However, dust particles are produced by binding tiny ($\sim 5$~{\textmu}m) glass beads. The granular columns were compressed with a pist… ▽ More For fundamentally characterizing the effect of hierarchical structure in granular matter, a set of compression-relaxation tests for dust particles and glass beads confined in a cylindrical cell was performed. Typical diameter of both grains is approximately 1~mm. However, dust particles are produced by binding tiny ($\sim 5$~{\textmu}m) glass beads. The granular columns were compressed with a piston until reaching a maximum load force of 20~N with a constant compression rate $v$ ($0.17 \leq v \leq 2000$~{\textmu}m~s$^{-1}$). After that, the piston was stopped and the relaxation process was quantified. From the experimental results, we found that the compression force $F$ nonlinearly increases with the increase of compression stroke $z$ depending on particles. Besides, periodic undulation and sudden force drops were observed on $F(z)$ in dust particles and glass beads, respectively. The relaxation process was characterized by an exponential decay of stress followed by a logarithmic dependence one in both kinds of particles. These experimental findings are the main point in this study. To understand the underlying physics governing the compression mechanics, we assumed empirical forms of $F(z)$; $F\propto z^α$ for dust particles and $F \propto \exp(z/z_G)$ for glass beads ($α=2.4$ and $z_G=70$~{\textmu}m). Then, we found that the growing manners of periodic undulation and force drops were identical to those of mean compression forces, i.e., power law in dust particles and exponential in glass beads. In addition, the undulation amplitude and wavelength decreased as $v$ increased in dust-particles compression. On the basis of experimental results and the difference between dust particles and glass beads, we also discuss the origin of undulation and the physical meaning of granular-compression models used in engineering fields. △ Less

Submitted 26 January, 2021; v1 submitted 19 December, 2020; originally announced December 2020.

Comments: 15 pages, 13 figures

Journal ref: Phys. Rev. Research 3, 013190 (2021)

Force chain structure in a rod-withdrawn granular layer

Authors: F. Okubo, H. Katsuragi

Abstract: When a rod is vertically withdrawn from a granular layer, oblique force chains can be developed by effective shearing. In this study, the force-chain structure in a rod-withdrawn granular layer was experimentally investigated using a photoelastic technique. The rod is vertically withdrawn from a two-dimensional granular layer consisting of bidisperse photoelastic disks. During the withdrawal, the… ▽ More When a rod is vertically withdrawn from a granular layer, oblique force chains can be developed by effective shearing. In this study, the force-chain structure in a rod-withdrawn granular layer was experimentally investigated using a photoelastic technique. The rod is vertically withdrawn from a two-dimensional granular layer consisting of bidisperse photoelastic disks. During the withdrawal, the development process of force chains is visualized by the photoelastic effect. By systematic analysis of photoelastic images, force chain structures newly developed by the rod withdrawing are identified and analyzed. In particular, the relation between the rod-withdrawing force $F_\mathrm{w}$, total force-chains force $F_\mathrm{t}$, and their average orientation $θ$ are discussed. We find that the oblique force chains are newly developed by withdrawing. The force-chain angle $θ$ is almost constant (approximately $20^{\circ}$ from the horizontal), and the total force $F_\mathrm{t}$ gradually increases by the withdrawal. In addition, $F_\mathrm{t}\sinθ$ shows a clear correlation with $F_\mathrm{w}$. △ Less

Submitted 19 December, 2020; originally announced December 2020.

Comments: 12 pages, 7 figures

Centroid migration on an impacted granular slope due to asymmetric ejecta deposition and landsliding

Authors: Tomomi Omura, Shinta Takizawa, Hiroaki Katsuragi

Abstract: For a fundamental understanding of terrain relaxation occurring on sloped surfaces of terrestrial bodies, we analyze the crater shape produced by an impact on an inclined granular (dry-sand) layer. Owing to asymmetric ejecta deposition followed by landsliding, the slope of the impacted inclined surface can be relaxed. Using the experimental results of a solid projectile impact on an inclined dry-s… ▽ More For a fundamental understanding of terrain relaxation occurring on sloped surfaces of terrestrial bodies, we analyze the crater shape produced by an impact on an inclined granular (dry-sand) layer. Owing to asymmetric ejecta deposition followed by landsliding, the slope of the impacted inclined surface can be relaxed. Using the experimental results of a solid projectile impact on an inclined dry-sand layer, we measure the distance of centroid migration induced by asymmetric cratering. We find that the centroid migration distance $x_\mathrm{mig}$ normalized to the crater minor-axis diameter $D_\mathrm{cy}$ can be expressed as a function of the initial inclination of the target $\tanθ$, the effective friction coefficient $μ$, and two parameters $K$ and $c$ that characterize the asymmetric ejecta deposition and oblique impact effect: $x_\mathrm{mig}/D_\mathrm{cy}=K \tanθ/(1-(\tanθ/μ)^2)+c$, where $K=0.6$, $μ=0.8$, and $c=-0.1$ to $0.3$. This result is consistent with a previous study that considered the effect of asymmetric ejecta deposition. The obtained results provide fundamental information for analyzing the degradation of sloped terrain on planetary surfaces, such as crater-shape degradation due to the accumulation of micro-impacts. △ Less

Submitted 19 December, 2020; originally announced December 2020.

Comments: 7 pages, 7 figures

A novel experimental setup for an oblique impact onto an inclined granular layer

Authors: Shinta Takizawa, Ryusei Yamaguchi, Hiroaki Katsuragi

Abstract: We develop an original apparatus of the granular impact experiment by which the incident angle of the solid projectile and inclination angle of the target granular layer can be systematically varied. Whereas most of the natural cratering events occur on inclined surfaces with various incident angles, there have not been any experiments on oblique impacts on an inclined target surface. To perform s… ▽ More We develop an original apparatus of the granular impact experiment by which the incident angle of the solid projectile and inclination angle of the target granular layer can be systematically varied. Whereas most of the natural cratering events occur on inclined surfaces with various incident angles, there have not been any experiments on oblique impacts on an inclined target surface. To perform systematic impact experiments, a novel experimental apparatus has to be developed. Therefore, we build an apparatus for impact experiments where both the incident angle and the inclination angle can be independently varied. The projectile-injection unit accelerates a plastic ball (6~mm in diameter) up to $v_i\simeq 100$~m~s$^{-1}$ impact velocity. The barrel of the injection unit is made with a three-dimensional printer. The impact dynamics is captured by high-speed cameras to directly measure the impact velocity and incident angle. The rebound dynamics of the projectile (restitution coefficient and rebound angle) is also measured. The final crater shapes are measured using a line-laser profiler mounted on the electric stages. By scanning the surface using this system, a three-dimensional crater shape (height map) can be constructed. From the measured result, we can define and measure the characteristic quantities of the crater. The analyzed result on the restitution dynamics is presented as an example of systematic experiments using the developed system. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Comments: 9 pages, 8 figures

Scaling laws for the oblique impact cratering on an inclined granular surface

Authors: S. Takizawa, H. Katsuragi

Abstract: Although a large number of astronomical craters are actually produced by the oblique impacts onto inclined surfaces, most of the laboratory experiments mimicking the impact cratering have been performed by the vertical impact onto a horizontal target surface. In previous studies on the effects of oblique impact and inclined terrain, only one of the impact angle $\varphi$ or target inclination angl… ▽ More Although a large number of astronomical craters are actually produced by the oblique impacts onto inclined surfaces, most of the laboratory experiments mimicking the impact cratering have been performed by the vertical impact onto a horizontal target surface. In previous studies on the effects of oblique impact and inclined terrain, only one of the impact angle $\varphi$ or target inclination angle $θ$ has been varied in the experiments. Therefore, we perform impact-cratering experiments by systematically varying both $\varphi$ and $θ$. A solid projectile of diameter $D_{\rm i}=6$~mm is impacted onto a sand surface with the range of impact velocity $v_{\rm i}=7$--$97$~m~s$^{-1}$. From the experimental result, we develop scaling laws for the crater dimensions on the basis of $Π$-group scaling. As a result, the crater dimensions such as cavity volume, diameter, aspect ratio, and depth-diameter ratio can be scaled by the factors $\sin \varphi$ and $\cos θ$ as well as the usual impact parameters ($v_{\rm i}$, $D_{\rm i}$, density of projectile, and surface gravity). Finally, we consider the possible application of the obtained scaling laws to the estimate of impact conditions (e.g., impact speed and impact angle) in natural crater records. △ Less

Submitted 14 July, 2019; v1 submitted 25 April, 2019; originally announced April 2019.

Comments: 12 pages, 16 figures

Bouncing of a projectile impacting a dense potato-starch suspension layer

Authors: K. Egawa, H. Katsuragi

Abstract: When a solid projectile is dropped onto a dense non-Brownian-particle suspension, the action of an extremely large resistance force on the projectile results in its drastic deceleration, followed by a rebound. In this study, we perform a set of simple experiments of dropping a solid-projectile impact onto a dense potato-starch suspension. From the kinematic data of the projectile motion, the resti… ▽ More When a solid projectile is dropped onto a dense non-Brownian-particle suspension, the action of an extremely large resistance force on the projectile results in its drastic deceleration, followed by a rebound. In this study, we perform a set of simple experiments of dropping a solid-projectile impact onto a dense potato-starch suspension. From the kinematic data of the projectile motion, the restitution coefficient and timescale of the rebound are measured. By assuming linear viscoelasticity, the effective transient elasticity and viscosity can be estimated. We additionally estimate the Stokes viscosity on a longer timescale by measuring the slow sinking time of the projectile. The estimated elastic modulus and viscosity are consistent with separately measured previous results. In addition, the effect of mechanical vibration on the viscoelasticity is examined. As a result, we find that the viscoelasticity of the impacted dense suspension is not significantly affected by the mechanical vibration. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: 9 pages, 9figures

Laboratory experiment and discrete-element-method simulation of granular-heap flows under vertical vibration

Authors: Daisuke Tsuji, Michio Otsuki, Hiroaki Katsuragi

Abstract: Granular flow dynamics on a vertically vibrated pile is studied by means of both laboratory experiments and numerical simulations. As already revealed, the depth-averaged velocity of a fully-fluidized granular pile under strong vibration, which is measured by a high-speed laser profiler in the experiment, can be explained by the nonlinear diffusion transport model proposed by our previous paper (T… ▽ More Granular flow dynamics on a vertically vibrated pile is studied by means of both laboratory experiments and numerical simulations. As already revealed, the depth-averaged velocity of a fully-fluidized granular pile under strong vibration, which is measured by a high-speed laser profiler in the experiment, can be explained by the nonlinear diffusion transport model proposed by our previous paper (Tsuji et al, Phys. Rev. Lett. 120, 128001 (2018)). In this paper, we report that a similar transport model can be applied to the relation between the surface velocity and slope in the experiment. These facts are also reproduced by particle-scale numerical simulations based on the discrete element method. In addition, using these numerical results, the velocity profile inside the fluidized pile is measured. As a result, we show that the flow velocity decreases exponentially with depth from the surface of the pile, which means that a clearly fluidized region, also known as shear band structure, is localized around the surface. However, its thickness grows proportionally with the local height of the pile, i.e., the shear band does not consist of a fluidized layer with a constant thickness. From these features, we finally demonstrate that the integration of this exponentially-decreasing velocity profile is consistent with the depth-averaged velocity predicted by the nonlinear diffusion transport model. △ Less

Submitted 28 May, 2019; v1 submitted 8 February, 2019; originally announced February 2019.

Comments: 13 pages, 7 figures, 2 table

Journal ref: Phys. Rev. E 99, 062902 (2019)

Impact-induced energy transfer and dissipation in granular clusters under microgravity conditions

Authors: Hiroaki Katsuragi, Jürgen Blum

Abstract: The impact-induced energy transfer and dissipation in granular targets without any confining walls are studied by microgravity experiments. A solid projectile impacts into a granular target at low impact speed ($0.045 \leq v_p \leq 1.6$~m~s$^{-1}$) in a laboratory drop tower. Granular clusters consisting of soft or hard particles are used as targets. Porous dust agglomerates and glass beads are us… ▽ More The impact-induced energy transfer and dissipation in granular targets without any confining walls are studied by microgravity experiments. A solid projectile impacts into a granular target at low impact speed ($0.045 \leq v_p \leq 1.6$~m~s$^{-1}$) in a laboratory drop tower. Granular clusters consisting of soft or hard particles are used as targets. Porous dust agglomerates and glass beads are used for soft and hard particles, respectively. The expansion of the granular target cluster is recorded by a high-speed camera. Using the experimental data, we find that (i)~a simple energy scaling can explain the energy transfer in both, soft- and hard-particles granular targets, (ii)~the kinetic impact energy is isotropically transferred to the target from the impact point, and (iii)~the transferred kinetic energy is $2$~-~$7$\% of the projectile's initial kinetic energy. The dissipative-diffusion model of energy transfer can quantitatively explain these behaviors. △ Less

Submitted 13 November, 2018; v1 submitted 25 October, 2018; originally announced October 2018.

Comments: 7 pages 9 figures

Impact-induced collapse of an inclined wet granular layer

Authors: S. Takizawa, H. Niiya, T. Tanabe, H. Nishimori, H. Katsuragi

Abstract: The collapse of an inclined cohesive granular layer triggered by a certain perturbation can be a model for not only landslides on Earth but also relaxations of asteroidal surface terrains. To understand such terrain dynamics, we conduct a series of experiments of a solid-projectile impact onto an inclined wet granular layer with various water contents and inclination angles. As a result, we find t… ▽ More The collapse of an inclined cohesive granular layer triggered by a certain perturbation can be a model for not only landslides on Earth but also relaxations of asteroidal surface terrains. To understand such terrain dynamics, we conduct a series of experiments of a solid-projectile impact onto an inclined wet granular layer with various water contents and inclination angles. As a result, we find two types of outcomes: "crater formation" and "collapse". The "collapse" phase is observed when the inclination angle is close to the maximum stable angle and the impact-induced vibration at the bottom of wet granular layer is sufficiently strong. To explain the collapse condition, we propose a simple block model considering the maximum stable angle, inclination angle, and impact-induced vibrational acceleration. Additionally, the attenuating propagation of the impact-induced vibrational acceleration is estimated on the basis of three-dimensional numerical simulations with discrete element method using dry particles. By combining wet-granular experiments and dry-granular simulations, we find that the impact-induced acceleration attenuates anisotropically in space. With a help of this attenuation form, the physical conditions to induce the collapse can be estimated using the block model. △ Less

Submitted 15 August, 2018; originally announced August 2018.

Comments: 7 pages, 5 figures

Shape dependence of resistance force exerted on an obstacle placed in a gravity-driven granular silo flow

Authors: H. Katsuragi, K. Anki Reddy, K. Endo

Abstract: Resistance force exerted on an obstacle in a gravity-driven slow granular silo flow is studied by experiments and numerical simulations. In a two-dimensional granular silo, an obstacle is placed just above the exit. Then, steady discharge flow is made and its flow rate can be controlled by the width of exit and the position of obstacle. During the discharge of particles, flow rate and resistance f… ▽ More Resistance force exerted on an obstacle in a gravity-driven slow granular silo flow is studied by experiments and numerical simulations. In a two-dimensional granular silo, an obstacle is placed just above the exit. Then, steady discharge flow is made and its flow rate can be controlled by the width of exit and the position of obstacle. During the discharge of particles, flow rate and resistance force exerting on the obstacle are measured. Using the obtained data, a dimensionless number characterizing the force balance in granular flow is defined by the relation between the discharge flow rate and resistance-force decreasing rate. The dimensionless number is independent of flow rate. Rather, we find the weak shape dependence of the dimensionless number. This tendency is a unique feature for the resistance force in granular silo flow. It characterizes the effective flow width interacting with the obstacle in granular silo flow. △ Less

Submitted 8 May, 2018; v1 submitted 2 December, 2017; originally announced December 2017.

Comments: 8 pages, 8 figures

Force Chain Evolution in a Two-Dimensional Granular Packing Compacted by Vertical Tappings

Authors: Naoki Iikawa, M. M. Bandi, Hiroaki Katsuragi

Abstract: We experimentally study the statistics of force-chain evolution in a vertically-tapped two-dimensional granular packing by using photoelastic disks. In this experiment, the tapped granular packing is gradually compacted. During the compaction, the isotropy of grain configurations is quantified by measuring the deviator anisotropy derived from fabric tensor, and then the evolution of force-chain st… ▽ More We experimentally study the statistics of force-chain evolution in a vertically-tapped two-dimensional granular packing by using photoelastic disks. In this experiment, the tapped granular packing is gradually compacted. During the compaction, the isotropy of grain configurations is quantified by measuring the deviator anisotropy derived from fabric tensor, and then the evolution of force-chain structure is quantified by measuring the interparticle forces and force-chain orientational order parameter. As packing fraction increases, the interparticle force increases and finally saturates to an asymptotic value. Moreover, the grain configurations and force-chain structures become isotropically random as the tapping-induced compaction proceeds. In contrast, the total length of force chains remains unchanged. From the correlations of those parameters, we find two relations: (i) a positive correlation between the isotropy of grain configurations and the disordering of force-chain orientations, and (ii) a negative correlation between the increasing of interparticle forces and the disordering of force-chain orientations. These relations are universally held regardless of the mode of particle motions with/without convection. △ Less

Submitted 3 March, 2018; v1 submitted 17 September, 2017; originally announced September 2017.

Journal ref: Phys. Rev. E 97, 032901 (2018)

The Physics of Protoplanetesimal Dust Agglomerates. X. Mechanical properties of dust aggregates probed by a solid-projectile impact

Authors: H. Katsuragi, J. Blum

Abstract: Dynamic characterization of mechanical properties of dust aggregates has been one of the most important problems to quantitatively discuss the dust growth in protoplanetary disks. We experimentally investigate the dynamic properties of dust aggregates by low-speed ($\lesssim 3.2$ m s$^{-1}$) impacts of solid projectiles. Spherical impactors made of glass, steel, or lead are dropped onto a dust agg… ▽ More Dynamic characterization of mechanical properties of dust aggregates has been one of the most important problems to quantitatively discuss the dust growth in protoplanetary disks. We experimentally investigate the dynamic properties of dust aggregates by low-speed ($\lesssim 3.2$ m s$^{-1}$) impacts of solid projectiles. Spherical impactors made of glass, steel, or lead are dropped onto a dust aggregate of packing fraction $φ=0.35$ under vacuum conditions. The impact results in cratering or fragmentation of the dust aggregate, depending on the impact energy. The crater shape can be approximated by a spherical segment and no ejecta are observed. To understand the underlying physics of impacts into dust aggregates, the motion of the solid projectile is acquired by a high-speed camera. Using the obtained position data of the impactor, we analyze the drag-force law and dynamic pressure induced by the impact. We find that there are two characteristic strengths. One is defined by the ratio between impact energy and crater volume and is $\simeq 120$ kPa. The other strength indicates the fragmentation threshold of dynamic pressure and is $\simeq 10$ kPa. The former characterizes the apparent plastic deformation and is consistent with the drag force responsible for impactor deceleration. The latter corresponds to the dynamic tensile strength to create cracks. Using these results, a simple model for the compaction and fragmentation threshold of dust aggregates is proposed. In addition, the comparison of drag-force laws for dust aggregates and loose granular matter reveals the similarities and differences between the two materials. △ Less

Submitted 26 October, 2017; v1 submitted 10 September, 2017; originally announced September 2017.

Comments: 10 pages, 7 figures

Journal ref: Astrophys. J. 851, 23 (2017)

Relaxation Dynamics of a Granular Pile on a Vertically-Vibrating Plate

Authors: Daisuke Tsuji, Michio Otsuki, Hiroaki Katsuragi

Abstract: Nonlinear relaxation dynamics of a vertically-vibrated granular pile is experimentally studied. In the experiment, the flux and slope on the relaxing pile are measured by using a high-speed laser profiler. The relation of these quantities can be modeled by the nonlinear transport law assuming the uniform vibro-fluidization of an entire pile. The fitting parameter in this model is only the relaxati… ▽ More Nonlinear relaxation dynamics of a vertically-vibrated granular pile is experimentally studied. In the experiment, the flux and slope on the relaxing pile are measured by using a high-speed laser profiler. The relation of these quantities can be modeled by the nonlinear transport law assuming the uniform vibro-fluidization of an entire pile. The fitting parameter in this model is only the relaxation efficiency, which characterizes the energy conversion rate from vertical vibration into horizontal transport. We demonstrate that this value is a constant independent of experimental conditions. The actual relaxation is successfully reproduced by the continuity equation with the proposed model. Finally its specific applicability toward an astrophysical phenomenon is shown. △ Less

Submitted 10 January, 2018; v1 submitted 12 August, 2017; originally announced August 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 120, 128001 (2018)

Obstacle-shape effect in a two-dimensional granular silo flow field

Authors: K. Endo, K. Anki Reddy, H. Katsuragi

Abstract: We conducted simple experiment and numerical simulation of two-dimensional granular discharge flow driven by gravity under the influence of an obstacle. According to the previous work (Zuriguel {\it et al.,\,Phys.\,Rev.\,Lett.}\,{\bf 107}: 278001, 2011), the clogging of granular discharge flow can be suppressed by putting a circular obstacle at a proper position. In order to investigate the detail… ▽ More We conducted simple experiment and numerical simulation of two-dimensional granular discharge flow driven by gravity under the influence of an obstacle. According to the previous work (Zuriguel {\it et al.,\,Phys.\,Rev.\,Lett.}\,{\bf 107}: 278001, 2011), the clogging of granular discharge flow can be suppressed by putting a circular obstacle at a proper position. In order to investigate the details of obstacle effect in granular flow, we focused on particle dynamics in this study. From the experimental and numerical data, we found that the obstacle remarkably affects the horizontal-velocity distribution and packing fraction at the vicinity of the exit. In addition to the circular obstacle, we utilized triangular, inverted-triangular, and horizontal-bar obstacles to discuss the obstacle-shape effect in granular discharge flow. Based on the investigation of dynamical quantities such as velocity distributions, granular temperature, and volume fraction, we found that the triangular obstacle or horizontal bar could be very effective to prevent the clogging. From the obtained result, we consider that the detouring of particles around the obstacle and resultant low packing fraction at the exit region effectively prevent the clogging in a certain class of granular discharge flow. △ Less

Submitted 15 June, 2017; originally announced June 2017.

Comments: 10 pages, 10 figures

Journal ref: Phys. Rev. Fluids 2, 094302 (2017)

Statistical properties of gravity-driven granular discharge flow under the influence of an obstacle

Authors: K. Endo, H. Katsuragi

Abstract: Two-dimensional granular discharge flow driven by gravity under the influence of an obstacle is experimentally investigated. A horizontal exit of width $W$ is opened at the bottom of vertical Hele-Shaw cell filled with stainless-steel particles to start the discharge flow. In this experiment, a circular obstacle is placed in front of the exit. Thus, the distance between the exit and obstacle $L$ i… ▽ More Two-dimensional granular discharge flow driven by gravity under the influence of an obstacle is experimentally investigated. A horizontal exit of width $W$ is opened at the bottom of vertical Hele-Shaw cell filled with stainless-steel particles to start the discharge flow. In this experiment, a circular obstacle is placed in front of the exit. Thus, the distance between the exit and obstacle $L$ is also an important parameter. During the discharge, granular-flow state is acquired by a high-speed camera. The bulk discharge-flow rate is also measured by load cell sensors. The obtained high-speed-image data are analyzed to clarify the particle-level granular-flow dynamics. Using the measured data, we find that the obstacle above the exit affects the granular-flow field. Specifically, the existence of obstacle results in large horizontal granular temperature and small packing fraction. This tendency becomes significant when $L$ is smaller than approximately 6$D_g$ when $W \simeq 4 D_g$, where $D_g$ is diameter of particles. △ Less

Submitted 11 November, 2016; originally announced November 2016.

Comments: 4 pages, 5 figures

Geometry-dependent constitutive law for granular slow frictional drag

Authors: T. Furuta, K. Katou, S. Itoh, K. Tachibana, S. Ishikawa, H. Katsuragi

Abstract: Frictional constitutive law for very slow vertical withdrawing of a thin rod from a granular bed is experimentally studied. Using a very precise creep meter, geometry-dependent granular frictional constitutive law is particularly examined. In some previous works, a dimensionless number $I=\dotγD_g/\sqrt{p/ρ_g}$ has been used to characterize granular frictional constitutive laws, where $\dotγ$,… ▽ More Frictional constitutive law for very slow vertical withdrawing of a thin rod from a granular bed is experimentally studied. Using a very precise creep meter, geometry-dependent granular frictional constitutive law is particularly examined. In some previous works, a dimensionless number $I=\dotγD_g/\sqrt{p/ρ_g}$ has been used to characterize granular frictional constitutive laws, where $\dotγ$, $D_g$, $p$, and $ρ_g$ are the shear strain rate, grain diameter, confining pressure, and bulk density of granular bed, respectively. It has been considered that granular frictional constitutive law expressed by $I$ is universal (almost geometry-independent) in dense flow regime. In this study, however, we find that the geometry of the system is much more crucial to characterize granular friction in a very slow withdrawing regime. Specifically, the ratio between rod and grain diameters must be an essential parameter to describe the granular frictional constitutive law. Physical meaning of the geometry-dependent constitutive law is discussed on the basis of grains-contact-number dependence of granular behavior. △ Less

Submitted 11 November, 2016; originally announced November 2016.

Comments: 11 pages, 7 figures

Sensitivity of Granular Force Chain Orientation to Disorder-induced Metastable Relaxation

Authors: N. Iikawa, M. M. Bandi, H. Katsuragi

Abstract: A two-dimensional system of photoelastic disks subject to vertical tapping against gravity was experimentally monitored from ordered to disordered configurations by varying bidispersity. The packing fraction $φ$, coordination number $Z$, and an appropriately defined force chain orientational order parameter $S$, all exhibit similar sharp transition with small increase in disorder. A measurable cha… ▽ More A two-dimensional system of photoelastic disks subject to vertical tapping against gravity was experimentally monitored from ordered to disordered configurations by varying bidispersity. The packing fraction $φ$, coordination number $Z$, and an appropriately defined force chain orientational order parameter $S$, all exhibit similar sharp transition with small increase in disorder. A measurable change in $S$, but not $φ~\&~Z$, was detected under tapping. We find disorder-induced metastability does not show configurational relaxation, but can be detected via force chain reorientations. △ Less

Submitted 2 March, 2016; v1 submitted 18 November, 2015; originally announced November 2015.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 116, 128001 (2016)

Temporal analysis of acoustic emission from a plunged granular bed

Authors: Daisuke Tsuji, Hiroaki Katsuragi

Abstract: The statistical property of acoustic emission (AE) events from a plunged granular bed is analyzed by means of actual time and natural time analyses. These temporal analysis methods allow us to investigate the details of AE events that follow a power-law distribution. In the actual time analysis, the calm time distribution and the decay of the event-occurrence density after the largest event (i.e.,… ▽ More The statistical property of acoustic emission (AE) events from a plunged granular bed is analyzed by means of actual time and natural time analyses. These temporal analysis methods allow us to investigate the details of AE events that follow a power-law distribution. In the actual time analysis, the calm time distribution and the decay of the event-occurrence density after the largest event (i.e., Omori-Utsu law) are measured. Although the former always shows a power-law form, the latter does not always obey a power law. Markovianity of the event-occurrence process is also verified using a scaling law by assuming that both of them exhibit power laws. We find that the effective shear strain rate is a key parameter to classify the emergence rate of power-law nature and Markovianity in the granular AE events. For the natural time analysis, the existence of self organized critical (SOC) states is revealed by calculating the variance of natural time $χ_k$, where $k$th natural time of N events is defined as $χ_k=k/N$. In addition, the energy difference distribution can be fitted by a $q$-Gaussian form, which is also consistent with the criticality of the system. △ Less

Submitted 18 September, 2015; originally announced September 2015.

Comments: 11 pagers, 12 figures

Journal ref: Phys. Rev. E 92, 042201 (2015)

Timescale of asteroid resurfacing by regolith convection resulting from the impact-induced global seismic shaking

Authors: Tomoya M. Yamada, Kousuke Ando, Tomokatsu Morota, Hiroaki Katsuragi

Abstract: A model for the asteroid resurfacing by regolith convection is built to estimate its timescale. In the model, regolith convection is driven by the impact-induced global seismic shaking. The model consists of three steps: (i) intermittent impact of meteoroids, (ii) impact-induced global vibration (seismic shaking), and (iii) vibration-induced regolith convection. In order to assess the feasibility… ▽ More A model for the asteroid resurfacing by regolith convection is built to estimate its timescale. In the model, regolith convection is driven by the impact-induced global seismic shaking. The model consists of three steps: (i) intermittent impact of meteoroids, (ii) impact-induced global vibration (seismic shaking), and (iii) vibration-induced regolith convection. In order to assess the feasibility of the resurfacing process driven by regolith convection, we estimate the resurfacing timescale as a function of the size of a target asteroid. In the estimate, a set of parameter values is assumed on the basis of previous works. However, some of them (e.g., seismic quality factor $Q$, seismic efficiency $η$, and seismic frequency $f$) are very uncertain. Although these parameter values might depend on asteroid size, we employ the standard values to estimate the representative behavior. To clarify the parameter dependences, we develop an approximated scaling form for the resurfacing timescale. According to the estimated result, we find that the regolith-convection-based resurfacing timescale is shorter than the mean collisional lifetime in most of the parameter uncertainty ranges. These parameter ranges are within those reported by previous works for small asteroids. This means that the regolith convection can be a possible mechanism for the asteroid resurfacing process. △ Less

Submitted 26 February, 2016; v1 submitted 26 August, 2015; originally announced August 2015.

Comments: 14pages, 8figures

Structural evolution of a granular pack under manual tapping

Authors: Naoki Iikawa, Mahesh M. Band, Hiroaki Katsuragi

Abstract: We experimentally study a two-dimensional (2D) granular pack of photoelastic disks subject to vertical manual tapping. Using bright and dark field images, we employ gradient-based image analysis methods to analyse various structural quantities. These include the packing fraction ($φ$), force per disk ($F_d$) and force chain segment length ($l$) as a function of the tapping number ($τ$). The increa… ▽ More We experimentally study a two-dimensional (2D) granular pack of photoelastic disks subject to vertical manual tapping. Using bright and dark field images, we employ gradient-based image analysis methods to analyse various structural quantities. These include the packing fraction ($φ$), force per disk ($F_d$) and force chain segment length ($l$) as a function of the tapping number ($τ$). The increase in packing fraction with tapping number is found to exponentially approach an asymptotic value. An exponential distribution is observed for both the cumulative numbers of force per disk $F_d$ : $N_{cum}(F_d) = A_F \exp (-\frac{F_d}{F_0})$, and force chain segment length $l$ : $N_{cum}(l) = A_l \exp (-\frac{l}{l_0})$. Whereas the coefficient ${A_F}$ varies with $τ$ for force per disk, the force chain segment length shows no dependence on $τ$. The $τ$ dependence of $F_d$ and $φ$ allows us to posit a linear relation between the total force of the granular pack ($F_{tot}^*(τ)$) and $φ(τ)$. △ Less

Submitted 2 July, 2015; originally announced July 2015.

Comments: 7 pages, 11 figures

Fingering induced by a solid sphere impact to viscous fluid

Authors: H. Katsuragi

Abstract: The number of splashed fingers generated by a solid projectile's impact onto a viscous liquid layer is experimentally studied. A steel sphere is dropped onto a viscous liquid pool. Then, a fingering instability occurs around the crater's rim, depending on the experimental conditions such as projectile's inertia and the viscosity of the target liquid. When the impact inertia is not sufficient, any… ▽ More The number of splashed fingers generated by a solid projectile's impact onto a viscous liquid layer is experimentally studied. A steel sphere is dropped onto a viscous liquid pool. Then, a fingering instability occurs around the crater's rim, depending on the experimental conditions such as projectile's inertia and the viscosity of the target liquid. When the impact inertia is not sufficient, any fingering structure cannot be observed. Contrastively, if the impact inertia is too much, the random splashing is induced and the counting of fingers becomes difficult. The clear fingering instability is observable in between these two regimes. The number of fingers $N$ is counted by using high-speed video data. The scaling of $N$ is discussed on the basis of dimensionless numbers. By assuming Rayleigh-Taylor instability, scaling laws for $N$ can be derived using Reynolds number $Re$, Weber number $We$, and Froude number $Fr$. Particularly, the scaling $N=(ρ_r Fr)^{1/4}We^{1/2}/3^{3/4}$ is obtained for the gravity-dominant cratering regime, where $ρ_r$ is the density ratio between a projectile and a target. Although the experimental data considerably scatters, the scaling law is consistent with the global trend of the data behavior. Using one of the scaling laws, planetary nano crater's rim structure is also evaluated. △ Less

Submitted 4 October, 2014; originally announced October 2014.

Comments: 5 pages, 3 figures

Scaling of convective velocity in a vertically vibrated granular bed

Authors: Tomoya M. Yamada, Hiroaki Katsuragi

Abstract: We experimentally study the velocity scaling of granular convection which is a possible mechanism of the regolith migration on the surface of small asteroids. In order to evaluate the contribution of granular convection to the regolith migration, the velocity of granular convection under the microgravity condition has to be revealed. Although it is hard to control the gravitational acceleration in… ▽ More We experimentally study the velocity scaling of granular convection which is a possible mechanism of the regolith migration on the surface of small asteroids. In order to evaluate the contribution of granular convection to the regolith migration, the velocity of granular convection under the microgravity condition has to be revealed. Although it is hard to control the gravitational acceleration in laboratory experiments, scaling relations involving the gravitational effect can be evaluated by systematic experiments. Therefore, we perform such a systematic experiment of the vibration-induced granular convection. From the experimental data, a scaling form for the granular convective velocity is obtained. The obtained scaling form implies that the granular convective velocity can be decomposed into two characteristic velocity components: vibrational and gravitational velocities. In addition, the system size dependence is also scaled. According to the scaling form, the granular convective velocity $v$ depends on the gravitational acceleration $g$ as $v \propto g^{0.97}$ when the normalized vibrational acceleration is fixed. △ Less

Submitted 30 May, 2014; v1 submitted 1 April, 2014; originally announced April 2014.

Comments: 16pages, 10figures

Drag force scaling for penetration into granular media

Authors: H. Katsuragi, D. J. Durian

Abstract: Impact dynamics is measured for spherical and cylindrical projectiles of many different densities dropped onto a variety non-cohesive granular media. The results are analyzed in terms of the material-dependent scaling of the inertial and frictional drag contributions to the total stopping force. The inertial drag force scales similar to that in fluids, except that it depends on the internal fricti… ▽ More Impact dynamics is measured for spherical and cylindrical projectiles of many different densities dropped onto a variety non-cohesive granular media. The results are analyzed in terms of the material-dependent scaling of the inertial and frictional drag contributions to the total stopping force. The inertial drag force scales similar to that in fluids, except that it depends on the internal friction coefficient. The frictional drag force scales as the square-root of the density of granular medium and projectile, and hence cannot be explained by the combination of granular hydrostatic pressure and Coulomb friction law. The combined results provide an explanation for the previously-observed penetration depth scaling. △ Less

Submitted 16 May, 2013; v1 submitted 15 April, 2013; originally announced April 2013.

Journal ref: Phys. Rev. E 87, 052208 (2013)

The effective surface roughness scaling of the gelation surface pattern formation

Authors: T. Mizoue, M. Tokita, H. Honjo, H. J. Barraza, H. Katsuragi

Abstract: The surface pattern formation on a gelation surface is analyzed using an effective surface roughness. The spontaneous surface deformation on DiMethylAcrylAmide (DMAA) gelation surface is controlled by temperature, initiator concentration, and ambient oxygen. The effective surface roughness is defined using 2-dimensional photo data to characterize the surface deformation. Parameter dependence of th… ▽ More The surface pattern formation on a gelation surface is analyzed using an effective surface roughness. The spontaneous surface deformation on DiMethylAcrylAmide (DMAA) gelation surface is controlled by temperature, initiator concentration, and ambient oxygen. The effective surface roughness is defined using 2-dimensional photo data to characterize the surface deformation. Parameter dependence of the effective surface roughness is systematically investigated. We find that decrease of ambient oxygen, increase of initiator concentration, and high temperature tend to suppress the surface deformation in almost similar manner. That trend allows us to collapse all the data to a unified master curve. As a result, we finally obtain an empirical scaling form of the effective surface roughness. This scaling is useful to control the degree of surface patterning. However, the actual dynamics of this pattern formation is not still uncovered. △ Less

Submitted 16 February, 2011; originally announced February 2011.

Journal ref: Progr. Colloid Polym. Sci., 136, 63 (2009)

Control of polymer gel surface pattern formation and its three dimensional measurement method

Authors: T. Mizoue, Y. Aoki, M. Tokita, H. Honjo, H. J. Barraza, H. Katsuragi

Abstract: We report the controllability of a gelation surface pattern formation. Recently, we have found and studied a novel kind of pattern formation that occurs during a radical polymerization (gelation) process. The pattern formation is observed in an open top boundary of quasi two dimensional gelation. In previous studies, we have used two dimensional photo based image processing to analyze the patterns… ▽ More We report the controllability of a gelation surface pattern formation. Recently, we have found and studied a novel kind of pattern formation that occurs during a radical polymerization (gelation) process. The pattern formation is observed in an open top boundary of quasi two dimensional gelation. In previous studies, we have used two dimensional photo based image processing to analyze the patterns. However, the actual pattern is a three dimensional surface deformation. Thus we develop a three dimensional measurement system using a line laser displacement sensor and an automatic x-stage. Patterns measured by the system are analyzed and discussed by means of pattern controllability. In particular, we focus on the possibility of the pattern control using an external temperature field. As a result, we reveal that the global structure can be controlled, whereas the characteristic length scales (wavelength and amplitude) are not controllable. △ Less

Submitted 16 February, 2011; originally announced February 2011.

Journal ref: J. Polym. Eng., 30, 523 (2010)

Length and time scales of a liquid drop impact and penetration into a granular layer

Authors: Hiroaki Katsuragi

Abstract: Liquid drop impact and penetration into a granular layer are investigated with diverse liquids and granular materials. We use various size of SiC abrasives and glass beads as a target granular material. We also employ ethanol and glycerol aqueous solutions as well as distilled water to make a liquid drop. The liquid drop impacts the granular layer with a low speed (~ m/s). The drop deformation and… ▽ More Liquid drop impact and penetration into a granular layer are investigated with diverse liquids and granular materials. We use various size of SiC abrasives and glass beads as a target granular material. We also employ ethanol and glycerol aqueous solutions as well as distilled water to make a liquid drop. The liquid drop impacts the granular layer with a low speed (~ m/s). The drop deformation and penetration are captured by a high speed camera. From the video data, characteristic time scales are measured. Using a laser profilometry system, resultant crater morphology and its characteristic length scales are measured. Static strength of the granular layer is also measured by the slow pillar penetration experiment to quantify the cohesive force effect. We find that the time scales are almost independent of impact speed, but they depend on liquid drop viscosity. Particularly, the penetration time is proportional to the square root of the liquid drop viscosity. Contrastively, the crater radius is independent of the liquid drop viscosity. The crater radius is scaled by the same form as the previous paper, (Katsuragi, Phys. Rev. Lett. vol. 104, 2010, p. 218001). △ Less

Submitted 16 February, 2011; originally announced February 2011.

Morphology Scaling of Drop Impact onto a Granular Layer

Authors: H. Katsuragi

Abstract: We investigate the impact of a free-falling water drop onto a granular layer. First, we constructed a phase diagram of crater shapes with two control parameters, impact speed and grain size. A low-speed impact makes a deeper cylindrical crater in a fluffy granular target. After high-speed impacts, we observed a convex bump higher than the initial surface level instead of a crater. The inner ring c… ▽ More We investigate the impact of a free-falling water drop onto a granular layer. First, we constructed a phase diagram of crater shapes with two control parameters, impact speed and grain size. A low-speed impact makes a deeper cylindrical crater in a fluffy granular target. After high-speed impacts, we observed a convex bump higher than the initial surface level instead of a crater. The inner ring can be also observed in medium impact speed regime. Quantitatively, we found a scaling law for crater radius with a dimensionless number consisting of impact speed and density ratio between the bulk granular layer and water drop. This scaling demonstrates that the water drop deformation is crucial to understand the crater morphology. △ Less

Submitted 12 May, 2010; originally announced May 2010.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett., 104, 218001 (2010)

Jamming and growth of dynamical heterogeneities versus depth for granular heap flow

Authors: H. Katsuragi, A. R. Abate, D. J. Durian

Abstract: We report on grain dynamics versus depth for steady-state gravity-driven flow of grains along a heap formed between two parallel sidewalls. Near the surface the flow is steady and fast, while far below there is no flow whatsoever; therefore, a jamming transition occurs where depth is an effective control parameter for setting the distance from the transition. As seen previously, the time-average… ▽ More We report on grain dynamics versus depth for steady-state gravity-driven flow of grains along a heap formed between two parallel sidewalls. Near the surface the flow is steady and fast, while far below there is no flow whatsoever; therefore, a jamming transition occurs where depth is an effective control parameter for setting the distance from the transition. As seen previously, the time-averaged velocity profile along the sidewall exhibits a nearly exponential decay vs depth. Using speckle-visiblility spectroscopy (SVS), we find that velocity fluctuations grow relative to the average on approach to jamming. Introducing an image-based order parameter and the variance in its temporal decay at a given depth, we also characterize the spatially heterogeneous nature of the dynamics and find that it increases on approach to jamming. In particular, the important time and length scales for dynamical heterogeneities are found to grow almost exponentially as a function of depth. These dynamical changes occur without noticeable change in structure, and are compared to behavior found by experiment and simulation elsewhere in order to test the universality of the jamming concept. In particular we find that the size of the heterogeneities scales as the inertia number raised to the -1/3 power, in agreement with two recent simulations. △ Less

Submitted 21 January, 2010; originally announced January 2010.

Journal ref: Soft Matter 6, 3023-9 (2010)

Projectile interactions in granular impact cratering

Authors: E. L. Nelson, H. Katsuragi, P. Mayor, D. J. Durian

Abstract: We present evidence for the interactions between a ball and the container boundaries, as well as between two balls, that are mediated by the granular medium during impact cratering. The presence of the bottom boundary affects the final penetration depth only for low drop heights with shallow filling, in which case, surprisingly, the penetration becomes deeper. By contrast the presence of the sid… ▽ More We present evidence for the interactions between a ball and the container boundaries, as well as between two balls, that are mediated by the granular medium during impact cratering. The presence of the bottom boundary affects the final penetration depth only for low drop heights with shallow filling, in which case, surprisingly, the penetration becomes deeper. By contrast the presence of the side wall causes less penetration and also an effective repulsion. Repulsion is also found for two balls dropped side-by-side. △ Less

Submitted 4 June, 2008; v1 submitted 20 March, 2008; originally announced March 2008.

Journal ref: Phys. Rev. Lett. 101, 068001 (2008).

Avalanche statistics and time-resolved grain dynamics for a driven heap

Authors: A. R. Abate, H. Katsuragi, D. J. Durian

Abstract: We probe the dynamics of intermittent avalanches caused by steady addition of grains to a quasi-two dimensional heap. To characterize the time-dependent average avalanche flow speed v(t), we image the top free surface. To characterize the grain fluctuation speed dv(t), we use Speckle-Visibility Spectroscopy. During an avalanche, we find that the fluctuation speed is approximately one-tenth the a… ▽ More We probe the dynamics of intermittent avalanches caused by steady addition of grains to a quasi-two dimensional heap. To characterize the time-dependent average avalanche flow speed v(t), we image the top free surface. To characterize the grain fluctuation speed dv(t), we use Speckle-Visibility Spectroscopy. During an avalanche, we find that the fluctuation speed is approximately one-tenth the average flow speed, and that these speeds are largest near the beginning of an event. We also find that the distribution of event durations is peaked, and that event sizes are correlated with the time interval since the end of the previous event. At high rates of grain addition, where successive avalanches merge into smooth continuous flow, the relationship between average and fluctuation speeds changes to dv Sqrt[v]. △ Less

Submitted 8 August, 2007; originally announced August 2007.

Journal ref: Phys. Rev. E 76, 061301 (2007)

Unified force law for granular impact cratering

Authors: H. Katsuragi, D. J. Durian

Abstract: Experiments on the low-speed impact of solid objects into granular media have been used both to mimic geophysical events and to probe the unusual nature of the granular state of matter. Observations have been interpreted in terms of conflicting stopping forces: product of powers of projectile depth and speed; linear in speed; constant, proportional to the initial impact speed; and proportional t… ▽ More Experiments on the low-speed impact of solid objects into granular media have been used both to mimic geophysical events and to probe the unusual nature of the granular state of matter. Observations have been interpreted in terms of conflicting stopping forces: product of powers of projectile depth and speed; linear in speed; constant, proportional to the initial impact speed; and proportional to depth. This is reminiscent of high-speed ballistics impact in the 19th and 20th centuries, when a plethora of empirical rules were proposed. To make progress, we developed a means to measure projectile dynamics with 100 nm and 20 us precision. For a 1-inch diameter steel sphere dropped from a wide range of heights into non-cohesive glass beads, we reproduce prior observations either as reasonable approximations or as limiting behaviours. Furthermore, we demonstrate that the interaction between projectile and medium can be decomposed into the sum of velocity-dependent inertial drag plus depth-dependent friction. Thus we achieve a unified description of low-speed impact phenomena and show that the complex response of granular materials to impact, while fundamentally different from that of liquids and solids, can be simply understood. △ Less

Submitted 2 March, 2007; originally announced March 2007.

Journal ref: Nature Physics 3, 420-423 (2007)

Diffusion-induced spontaneous pattern formation on gelation surfaces

Authors: Hiroaki Katsuragi

Abstract: Although the pattern formation on polymer gels has been considered as a result of the mechanical instability due to the volume phase transition, we found a macroscopic surface pattern formation not caused by the mechanical instability. It develops on gelation surfaces, and we consider the reaction-diffusion dynamics mainly induces a surface instability during polymerization. Random and straight… ▽ More Although the pattern formation on polymer gels has been considered as a result of the mechanical instability due to the volume phase transition, we found a macroscopic surface pattern formation not caused by the mechanical instability. It develops on gelation surfaces, and we consider the reaction-diffusion dynamics mainly induces a surface instability during polymerization. Random and straight stripe patterns were observed, depending on gelation conditions. We found the scaling relation between the characteristic wavelength and the gelation time. This scaling is consistent with the reaction-diffusion dynamics and would be a first step to reveal the gelation pattern formation dynamics. △ Less

Submitted 13 January, 2006; originally announced January 2006.

Comments: 7 pages, 4 figures

Journal ref: Europhys. Lett. 73, 793 (2006)