Showing 1–9 of 9 results for author: Kareiva, A

1-Adamantanamine implementation in surface engineering of biomimetic PVDF-based membranes for enhanced membrane distillation

Authors: Samer Al-Gharabli, Nafisah Al-Rifai, Simona Jurevičiūte, Aivaras Kareiva, Artur P. Terzyk, Emil Korczeniewski, Ewa Olewnik-Kruszkowska, Zuzanna Flanc, Waldemar Jankowski, Wojciech Kujawski, Joanna Kujawa

Abstract: Membrane distillation (MD) stands at the forefront of desalination technology, harnessing the power of phase change to separate water vapor from saline using minimal energy resources efficiently. In response to this challenge, membranes with tuned pores morphology and surface chemistry with biomimetic 3D pine-like structures with improved affinity to water (desalination) and/or hazardous VOC (VOC… ▽ More Membrane distillation (MD) stands at the forefront of desalination technology, harnessing the power of phase change to separate water vapor from saline using minimal energy resources efficiently. In response to this challenge, membranes with tuned pores morphology and surface chemistry with biomimetic 3D pine-like structures with improved affinity to water (desalination) and/or hazardous VOC (VOC removal) were developed and studied systematically. By implementing VIPS-PVDF membranes and a green modifier of 1-adamantanamine for the first time, membranes with a revolutionary network architecture were generated. The modifier was introduced either physically to the polymeric matrix or chemically through covalent attachment onto the surface and inside the porous structure. As a result, membranes that defy wetting under extreme hydrostatic pressures (>11.5 bar) were produced while preserving unparalleled vapor transport efficiency. The 1-adamantanamine promotes transport and enhances the affinity to the VOC, ensuring excellent membrane performance at different applications of the MD process. Transport was enhanced more than 3.6 times and separation factor beta changed from 3.48 to 15.22 for MTBE removal and from 2.0 to 3.46 for EtOH removal when comparing pristine PVDF with membrane chemically modified with 1-adamantanamine (PVDF_Ch02). The process separation index during the MTBE removal changed from 20 kg m-2 h-1 (PVDF) to 297 kg m-2 h-1 (PVDF_Ch02). All materials were highly stable and durable during the MD applications. This innovative approach not only revolutionizes desalination but also holds immense promise for diverse applications beyond, particularly in the realm of wastewater treatment. A study of the icing process on a cold plate with new membranes provided deeper insight into the icing mechanism and the role of membrane LEP in it. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Comments: 56 pages, 17 figures, 5 tables

MSC Class: https://zenodo.org/records/15055402

Journal ref: Desalination, 596, 118331, 2025

Pressure induced phase transitions in Sm-doped BiFeO3 in the morphotropic phase boundary

Authors: A. Pakalniškis, R. Skaudžius, D. V. Zhaludkevich, S. I. Latushka, V. Sikolenko, A. V. Sysa, M. Silibin, K. Mažeika, D. Baltrūnas, G. Niaura, M. Talaikis, D. V. Karpinsky, A. Kareiva

Abstract: Sm-doped BiFeO3 compacted powders with composition across the morphotropic phase boundary region were prepared by sol-gel method. Crystal structure, morphology and magnetic state of the compounds were analyzed as a function of dopant concentration, temperature and external pressure using synchrotron and laboratory X-ray diffraction, electron microscopy, Raman and Mossbauer spectroscopy. Applicatio… ▽ More Sm-doped BiFeO3 compacted powders with composition across the morphotropic phase boundary region were prepared by sol-gel method. Crystal structure, morphology and magnetic state of the compounds were analyzed as a function of dopant concentration, temperature and external pressure using synchrotron and laboratory X-ray diffraction, electron microscopy, Raman and Mossbauer spectroscopy. Application of external pressure shifts the phase transition from the rhombohedral structure to the nonpolar orthorhombic structure towards lower concentration of the dopant content, wherein the amount of the anti-polar orthorhombic phase notably decreases. Raman and Mossbauer spectroscopy data provides additional information about the structural distortion on local scale level which testifies faster formation of nonpolar orthorhombic phase and associated modification in the magnetic state in the compounds subjected to high pressure. Temperature increase leads to the structural transition to the nonpolar orthorhombic phase regardless the structural state at room temperature; furthermore, application of external pressure decreases the phase transition temperature. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Journal ref: Volume 277, 1 February 2022, 125458

Magnetic properties of BiFeO$_3$-BaTiO$_3$ ceramics in the morphotropic phase boundary: a role of crystal structure and structural parameters

Authors: D. V. Karpinsky, M. V. Silibin, D. V. Zhaludkevich, S. I. Latushka, A. V. Sysa, V. V. Sikolenko, A. L. Zhaludkevich, V. A. Khomchenko, A. Franz, K. Mazeika, D. Baltrunas, A. Kareiva

Abstract: A correlation between the crystal structure and magnetic properties of system (1-x)BiFeO$_3$-(x)BaTiO$_3$ with compounds across the morphotropic phase boundary was studied using X-ray and neutron diffraction, magnetometry, and Mossbauer spectroscopy measurements. Increase in the dopants content leads to the structural transition from the rhombohedral phase to the cubic phase via a formation of the… ▽ More A correlation between the crystal structure and magnetic properties of system (1-x)BiFeO$_3$-(x)BaTiO$_3$ with compounds across the morphotropic phase boundary was studied using X-ray and neutron diffraction, magnetometry, and Mossbauer spectroscopy measurements. Increase in the dopants content leads to the structural transition from the rhombohedral phase to the cubic phase via a formation of the two-phase region (0.2 < x < 0.33), wherein the magnetic structure changes from the modulated G-type antiferromagnetic to the collinear antiferromagnetic via a stabilization of the non-collinear antiferromagnetic phase with non-zero remanent magnetization. The value of magnetic moment calculated per iron ion based on the Mossbauer and neutron diffraction data decreases from m = 4.4 mB for the compound with x=0.25 to m=3.2 mB for the compound with x=0.35 testifying a dominance of 3+ oxidation state of the iron ions. Increase in the amount of the cubic phase leads to a reduction in the remanent magnetization from 0.02 emu.g for the compounds with the dominant rhombohedral phase (x < 0.27) down to about 0.001 emu/g for the compounds with dominant cubic structure (x >= 0.27). Rapid decrease in the remanent magnetization observed in the compounds across the phase coexistence region points at no direct correlation between the type of structural distortion and non-zero remanent magnetization, while the oxygen octahedra tilting is the key factor determining the presence of non-zero remanent magnetization. △ Less

Submitted 25 August, 2021; originally announced August 2021.

Morphotropic Phase Boundary in Sm-Substituted BiFeO3 Ceramics: Local vs Microscopic Approaches

Authors: A. Pakalniskis, R. Skaudzius, D. V. Zhaludkevich, A. L. Zhaludkevich, D. O. Alikin, A. S. Abramov, T. Murauskas, V. Ya. Shur, A. A. Dronov, M. V. Silibin, A. Selskis, R. Ramanauskas, A. Lukowiak, W. Strek, D. V. Karpinsky, A. Kareiva

Abstract: Samarium substituted bismuth ferrite (BiFeO3) ceramics prepared by sol-gel synthesis method were studied using both local scale and microscopic measurement techniques in order to clarify an evolution of the crystal structure of the compounds across the morphotropic phase boundary region. X-ray diffraction analysis, transmission and scanning electron microscopies, XPS, EDS/EDX experiments and piezo… ▽ More Samarium substituted bismuth ferrite (BiFeO3) ceramics prepared by sol-gel synthesis method were studied using both local scale and microscopic measurement techniques in order to clarify an evolution of the crystal structure of the compounds across the morphotropic phase boundary region. X-ray diffraction analysis, transmission and scanning electron microscopies, XPS, EDS/EDX experiments and piezoresponse force microscopy were used to study the structural transitions from the polar active rhombohedral phase to the anti-polar orthorhombic phase and then to the non-polar orthorhombic phase, observed in the Bi1-xSmxFeO3 compounds within the concentration range of 0.08 < x < 0.2. The results obtained by microscopic techniques testify that the compounds in the range of 0.12 < x < 0.15 are characterized by two phase structural state formed by a coexistence of the rhombohedral and the anti-polar orthorhombic phases; two phase structural state observed in the compounds with 0.15 < x < 0.18 is associated with a coexistence of the anti-polar orthorhombic and the non-polar orthorhombic phases. Local scale measurements have revealed a notable difference in the concentration range ascribed to the morphotropic phase boundary estimated by microscopic measurements, the obtained results testify a wider concentration range ascribed to a coexistence of different structural phases, the background of the mentioned difference is discussed. △ Less

Submitted 15 April, 2021; originally announced April 2021.

A Combined Theoretical and Experimental Study of the Phase Coexistence and Morphotropic Boundaries in Ferroelectric-Antiferroelectric-Antiferrodistortive Multiferroics

Authors: Anna N. Morozovska, Dmitry V. Karpinsky, Denis O. Alikin, Alexander Abramov, Eugene A. Eliseev, Maya D. Glinchuk, Andrii D. Yaremkevich, Olena M. Fesenko, Tamara V. Tsebrienko, A. Pakalniškis, A. Kareiva, Maxim V. Silibin, Vitali V. Sidski, Sergei V. Kalinin, Andrei L Kholkin

Abstract: The physical nature of the ferroelectric (FE), ferrielectric (FEI) and antiferroelectric (AFE) phases, their coexistence and spatial distributions underpin the functionality of antiferrodistortive (AFD) multiferroics in the vicinity of morphotropic phase transitions. Using Landau-Ginzburg-Devonshire (LGD) phenomenology and a semi-microscopic four sublattice model (FSM), we explore the behavior of… ▽ More The physical nature of the ferroelectric (FE), ferrielectric (FEI) and antiferroelectric (AFE) phases, their coexistence and spatial distributions underpin the functionality of antiferrodistortive (AFD) multiferroics in the vicinity of morphotropic phase transitions. Using Landau-Ginzburg-Devonshire (LGD) phenomenology and a semi-microscopic four sublattice model (FSM), we explore the behavior of different AFE, FEI and FE long-range orderings and their coexistence at the morphotropic phase boundaries in FE-AFE-AFD multiferroics. These theoretical predictions are compared with the experimental observations for dense Bi1-yRyFeO3 ceramics, where R is Sm or La atoms with the fraction 0 < y< 0.25, as confirmed by the X-ray diffraction (XRD) and Piezoresponse Force Microscopy (PFM). These complementary measurements were used to study the macroscopic and nanoscopic transformation of the crystal structure with the doping. The comparison of the measured and calculated AFE/FE phase fractions demonstrate that the LGD-FSM approach well describes the experimental results obtained by XRD and PFM for Bi1-yRyFeO3. Hence, this combined theoretical and experimental approach provides further insight into the origin of the morphotropic boundaries and coexisting FE and AFE states in model rare-earth doped multiferroics. △ Less

Submitted 14 February, 2021; v1 submitted 30 December, 2020; originally announced December 2020.

Comments: 32 pages, 9 figures, 2 appendices

Nanoscale ferroelectricity in pseudo-cubic sol-gel derived barium titanate -- bismuth ferrite (BaTiO$_3$-BiFeO$_3$) solid solutions

Authors: A. Pakalniskis A. Lukowiak, G. Niaura, P. Gluchowski, D. V. Karpinsky, D. O. Alikin, A. S. Abramov, A. Zhaludkevich, M. Silibin, A. L. Kholkin, R. Skaudzius, W. Strek, A. Kareiva

Abstract: Single phase barium titanate-bismuth ferrite ((1-x)BaTi$_3$-(x)BiFe$_3$, BTO-BFO) solid solutions were prepared using citric acid and ethylene glycol assisted sol-gel synthesis method. Depending on the dopant content the samples are characterized by tetragonal, tetragonal-pseudocubic, pseudocubic and rhombohedral structure as confirmed by Raman spectroscopy and XRD measurements. An increase of the… ▽ More Single phase barium titanate-bismuth ferrite ((1-x)BaTi$_3$-(x)BiFe$_3$, BTO-BFO) solid solutions were prepared using citric acid and ethylene glycol assisted sol-gel synthesis method. Depending on the dopant content the samples are characterized by tetragonal, tetragonal-pseudocubic, pseudocubic and rhombohedral structure as confirmed by Raman spectroscopy and XRD measurements. An increase of the BFO content leads to a reduction in the cell parameters accompanied by a decrease in polar distortion of the unit cell wherein an average particle size increases from 60 up to 350 nm. Non zero piezoresponse was observed in the compounds with pseudocubic structure while no polar distortion was detected in their crystal structure using X-ray diffraction method. The origin of the observed non-negligible piezoresponse was discussed assuming a coexistence of nanoscale polar and non-polar phases attributed to the solid solutions with high BFO content. A coexistence of the nanoscale regions having polar and non-polar character is considered as a key factor to increase macroscopic piezoresponse in the related compounds due to increased mobility of the domain walls and phase boundaries. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Evolution of the crystal structure and magnetic properties of Sm-doped BiFeO3 ceramics across the phase boundary region

Authors: D. V. Karpinsky, A. Pakalniskis, G. Niaura, D. V. Zhaludkevich, A. L. Zhaludkevich, S. I. Latushka, M. Silibin, M. Serdechnova, V. M. Garamus A. Lukowiak, W. Strek, M. Kaya, R. Skaudzius, A. Kareiva

Abstract: Samarium doped BiFeO3 compounds having nano-size crystallites were prepared by the ethylene glycol assisted sol-gel synthesis method. X-ray diffraction and SEM measurements as well as Raman spectroscopy and FTIR experiments were used to clarify the evolution of the crystal structure on microscopic and local scale levels in the compounds having formula Bi1-xSmxFeO3, where x equals from 0 to 1. Magn… ▽ More Samarium doped BiFeO3 compounds having nano-size crystallites were prepared by the ethylene glycol assisted sol-gel synthesis method. X-ray diffraction and SEM measurements as well as Raman spectroscopy and FTIR experiments were used to clarify the evolution of the crystal structure on microscopic and local scale levels in the compounds having formula Bi1-xSmxFeO3, where x equals from 0 to 1. Magnetization measurements along with the structural data were used to determine a correlation between magnetic properties and crystal structure of the compounds. The compounds with from x 0.1-0.2 are characterized by the sequence of the structural transitions driven by the dopant increase, from the polar rhombohedral phase to the non-polar orthorhombic phase via two-phase regions characterized by the presence of the anti-polar orthorhombic phase. The concentration regions ascribed to a coexistence of the rhombohedral and the anti-polar orthorhombic phases as well as theanti-polar orthorhombic and the non-polar orthorhombic phases are observed in the ranges from 0.12 to 0.15 and from 0.15 to 0.18 respectively. The compounds having single-phase rhombohedral structure are characterized by a release of remnant magnetization as compared to ceramics with similar chemical compositions but synthesized by the solid-state reaction method and having microscopic size crystallites. A correlation between the type of structural distortion, morphology of crystallites and an onset of remnant magnetization is discussed highlighting a difference in the evolution of crystal structure and magnetization observed for the Sm-doped ceramics prepared by modified sol-gel method and conventional solid-state reaction technique. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Ferromagnetic-like behavior of Bi0.9La0.1FeO3-KBr nanocomposites

Authors: Dmitry V. Karpinsky, Olena M. Fesenko, Maxim V. Silibin, Sergei V. Dubkov, Mykola Chaika, Andriy Yaremkevich, Anna Lukowiak, Yuriy Gerasymchuk, Wieslaw Strek, Andrius Pakalniskis, Ramunas Skaudzius, Aivaras Kareiva, Yevhen M. Fomichov, Vladimir V. Shvartsman, Sergei V. Kalinin, Nicholas V. Morozovsky, Anna N. Morozovska

Abstract: We studied magnetostatic response of the Bi0.9La0.1FeO3-KBr composites (BLFO-KBr) consisting of nanosized (about 100 nm) ferrite Bi0.9La0.1FeO3 (BLFO) conjugated with fine grinded ionic conducting KBr. When the fraction of KBr is rather small (less than 15 wt percent) the magnetic response of the composite is very weak and similar to that observed for the BLFO (pure KBr matrix without Bi1-xLaxFeO3… ▽ More We studied magnetostatic response of the Bi0.9La0.1FeO3-KBr composites (BLFO-KBr) consisting of nanosized (about 100 nm) ferrite Bi0.9La0.1FeO3 (BLFO) conjugated with fine grinded ionic conducting KBr. When the fraction of KBr is rather small (less than 15 wt percent) the magnetic response of the composite is very weak and similar to that observed for the BLFO (pure KBr matrix without Bi1-xLaxFeO3 has no magnetic response as anticipated). However, when the fraction of KBr increases above 15percent, the magnetic response of the composite changes substantially and the field dependence of magnetization reveals ferromagnetic-like hysteresis loop with a remanent magnetization about 0.14 emu/g and coercive field about 1.8 Tesla (at room temperature). Nothing similar to the ferromagnetic-like hysteresis loop can be observed in BLFO ceramics, which magnetization quasi linearly increases with magnetic field. Different physical mechanisms were considered to explain the unusual experimental results for BLFO-KBr nanocomposites, but only those among them, which are highly sensitive to the interaction of antiferromagnetic Bi0.9La0.1FeO3 with ionic conductor KBr, can be relevant. An appropriate mechanism turned out to be ferro-magneto-ionic coupling. △ Less

Submitted 22 January, 2019; originally announced January 2019.

Comments: 24 pages, 4 figures in the main text, and supplement with 4 figures

Polylactic acid-nanocrystalline carbonated hydroxyapatite (PLA-cHAP) composite: preparation and surface topographical structuring with direct laser writing (DLW)

Authors: Edita Garskaite, Laurynas Alinauskas, Marian Drienovsky, Jozef Krajcovic, Roman Cicka, Marian Palcut, Linas Jonusauskas, Mangirdas Malinauskas, Zivile Stankeviciute, Aivaras Kareiva

Abstract: The fabrication of polylactic acid (PLA)-carbonated hydroxyapatite (cHAP) composite material from synthesised phase pure nano-cHAP and melted PLA by mechanical mixing at 220-235°C has been developed in this study. Topographical structuring of PLA-cHAP composite surfaces was performed by direct laser writing (DLW). Microstructured surfaces and the apatite distribution within the composite and forme… ▽ More The fabrication of polylactic acid (PLA)-carbonated hydroxyapatite (cHAP) composite material from synthesised phase pure nano-cHAP and melted PLA by mechanical mixing at 220-235°C has been developed in this study. Topographical structuring of PLA-cHAP composite surfaces was performed by direct laser writing (DLW). Microstructured surfaces and the apatite distribution within the composite and formed grooves were evaluated by optical and scanning electron microscopies. The influence of the dopant concentration as well as the laser power and translation velocity on the composite surface morphology is discussed. The synthesis of carbonated hydroxyapatite (cHAP) nanocrystalline powders via wet chemistry approach from calcium acetate and diammonium hydrogen phosphate precursors together with crosslinking and complexing agents of polyethylene glycol, poly(vinyl alcohol) and triethanolamine is also reported. Thermal decomposition of the gels and formation of nanocrystalline cHAP were evaluated by thermal analysis, mass spectrometry and dilatometry measurements. The effect of organic additives on the formation and morphological features of cHAP was investigated. The phase purity and crystallinity of the carbonated apatite powders were evaluated by X-ray diffraction analysis and FT-IR spectroscopy. △ Less

Submitted 3 May, 2016; originally announced May 2016.

Comments: 25 pages, 10 figures, with supplementaries