Showing 1–18 of 18 results for author: Küng, B

Enhancing Certified Robustness via Block Reflector Orthogonal Layers and Logit Annealing Loss

Authors: Bo-Han Lai, Pin-Han Huang, Bo-Han Kung, Shang-Tse Chen

Abstract: Lipschitz neural networks are well-known for providing certified robustness in deep learning. In this paper, we present a novel, efficient Block Reflector Orthogonal (BRO) layer that enhances the capability of orthogonal layers on constructing more expressive Lipschitz neural architectures. In addition, by theoretically analyzing the nature of Lipschitz neural networks, we introduce a new loss fun… ▽ More Lipschitz neural networks are well-known for providing certified robustness in deep learning. In this paper, we present a novel, efficient Block Reflector Orthogonal (BRO) layer that enhances the capability of orthogonal layers on constructing more expressive Lipschitz neural architectures. In addition, by theoretically analyzing the nature of Lipschitz neural networks, we introduce a new loss function that employs an annealing mechanism to increase margin for most data points. This enables Lipschitz models to provide better certified robustness. By employing our BRO layer and loss function, we design BRONet - a simple yet effective Lipschitz neural network that achieves state-of-the-art certified robustness. Extensive experiments and empirical analysis on CIFAR-10/100, Tiny-ImageNet, and ImageNet validate that our method outperforms existing baselines. The implementation is available at \href{https://github.com/ntuaislab/BRONet}{https://github.com/ntuaislab/BRONet}. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: ICML 2025 Spotlight

Towards Large Certified Radius in Randomized Smoothing using Quasiconcave Optimization

Authors: Bo-Han Kung, Shang-Tse Chen

Abstract: Randomized smoothing is currently the state-of-the-art method that provides certified robustness for deep neural networks. However, due to its excessively conservative nature, this method of incomplete verification often cannot achieve an adequate certified radius on real-world datasets. One way to obtain a larger certified radius is to use an input-specific algorithm instead of using a fixed Gaus… ▽ More Randomized smoothing is currently the state-of-the-art method that provides certified robustness for deep neural networks. However, due to its excessively conservative nature, this method of incomplete verification often cannot achieve an adequate certified radius on real-world datasets. One way to obtain a larger certified radius is to use an input-specific algorithm instead of using a fixed Gaussian filter for all data points. Several methods based on this idea have been proposed, but they either suffer from high computational costs or gain marginal improvement in certified radius. In this work, we show that by exploiting the quasiconvex problem structure, we can find the optimal certified radii for most data points with slight computational overhead. This observation leads to an efficient and effective input-specific randomized smoothing algorithm. We conduct extensive experiments and empirical analysis on CIFAR-10 and ImageNet. The results show that the proposed method significantly enhances the certified radii with low computational overhead. △ Less

Submitted 27 December, 2023; v1 submitted 31 January, 2023; originally announced February 2023.

Comments: AAAI 2024

Class-Aware Robust Adversarial Training for Object Detection

Authors: Pin-Chun Chen, Bo-Han Kung, Jun-Cheng Chen

Abstract: Object detection is an important computer vision task with plenty of real-world applications; therefore, how to enhance its robustness against adversarial attacks has emerged as a crucial issue. However, most of the previous defense methods focused on the classification task and had few analysis in the context of the object detection task. In this work, to address the issue, we present a novel cla… ▽ More Object detection is an important computer vision task with plenty of real-world applications; therefore, how to enhance its robustness against adversarial attacks has emerged as a crucial issue. However, most of the previous defense methods focused on the classification task and had few analysis in the context of the object detection task. In this work, to address the issue, we present a novel class-aware robust adversarial training paradigm for the object detection task. For a given image, the proposed approach generates an universal adversarial perturbation to simultaneously attack all the occurred objects in the image through jointly maximizing the respective loss for each object. Meanwhile, instead of normalizing the total loss with the number of objects, the proposed approach decomposes the total loss into class-wise losses and normalizes each class loss using the number of objects for the class. The adversarial training based on the class weighted loss can not only balances the influence of each class but also effectively and evenly improves the adversarial robustness of trained models for all the object classes as compared with the previous defense methods. Furthermore, with the recent development of fast adversarial training, we provide a fast version of the proposed algorithm which can be trained faster than the traditional adversarial training while keeping comparable performance. With extensive experiments on the challenging PASCAL-VOC and MS-COCO datasets, the evaluation results demonstrate that the proposed defense methods can effectively enhance the robustness of the object detection models. △ Less

Submitted 30 March, 2021; v1 submitted 30 March, 2021; originally announced March 2021.

Epitaxial rhenium microwave resonators

Authors: E Dumur, B Delsol, T Weißl, B Kung, W Guichard, C Hoarau, C Naud, K Hasselbach, O Buisson, K Ratter, B Gilles

Abstract: We have fabricated rhenium microwave resonators from epitaxial films. We have used thin films of different structural quality depending on their growth conditions. The resonators were coupled to a microwave transmission line which allows the measurement of their resonance frequencies and internal quality factors. From the resonance frequency at low temperature , the effective penetration depth and… ▽ More We have fabricated rhenium microwave resonators from epitaxial films. We have used thin films of different structural quality depending on their growth conditions. The resonators were coupled to a microwave transmission line which allows the measurement of their resonance frequencies and internal quality factors. From the resonance frequency at low temperature , the effective penetration depth and the London penetration depth of the rhenium film are extracted. △ Less

Submitted 9 May, 2016; originally announced May 2016.

Journal ref: IEEE Transactions on Applied Superconductivity, Institute of Electrical and Electronics Engineers, 2016

Unexpectedly allowed transition in two inductively coupled transmons

Authors: Étienne Dumur, Bruno Küng, Alexey Feofanov, Thomas Weißl, Yuriy Krupko, Nicolas Roch, Cécile Naud, Wiebke Guichard, Olivier Buisson

Abstract: We present experimental results in which the unexpected zero-two transition of a circuit composed of two inductively coupled transmons is observed. This transition shows an unusual magnetic flux dependence with a clear disappearance at zero magnetic flux. In a transmon qubit the symmetry of the wave functions prevents this transition to occur due to selection rule. In our circuit the Josephson eff… ▽ More We present experimental results in which the unexpected zero-two transition of a circuit composed of two inductively coupled transmons is observed. This transition shows an unusual magnetic flux dependence with a clear disappearance at zero magnetic flux. In a transmon qubit the symmetry of the wave functions prevents this transition to occur due to selection rule. In our circuit the Josephson effect introduces strong couplings between the two normal modes of the artificial atom. This leads to a coherent superposition of states from the two modes enabling such transitions to occur. △ Less

Submitted 20 January, 2016; originally announced January 2016.

Journal ref: IEEE Transactions on Applied Superconductivity, 26, 1-4 (2016)

Kerr coefficients of plasma resonances in Josephson junction chains

Authors: Thomas Weißl, Bruno Küng, Étienne Dumur, Alexey K. Feofanov, Iulian Matei, Cécile Naud, Olivier Buisson, Frank W. J. Hekking, Wiebke Guichard

Abstract: We present an experimental and theoretical analysis of the self- and cross-Kerr effect of extended plasma resonances in Josephson junction chains. We calculate the Kerr coefficients by deriving and diagonalizing the Hamiltonian of a linear circuit model for the chain and then adding the Josephson non-linearity as a perturbation. The calculated Kerr-coefficients are compared with the measurement da… ▽ More We present an experimental and theoretical analysis of the self- and cross-Kerr effect of extended plasma resonances in Josephson junction chains. We calculate the Kerr coefficients by deriving and diagonalizing the Hamiltonian of a linear circuit model for the chain and then adding the Josephson non-linearity as a perturbation. The calculated Kerr-coefficients are compared with the measurement data of a chain of 200 junctions. The Kerr effect manifests itself as a frequency shift that depends linearly on the number of photons in a resonant mode. By changing the input power on a low signal level, we are able to measure this shift. The photon number is calibrated using the self-Kerr shift calculated from the sample parameters. We then compare the measured cross-Kerr shift with the theoretical prediction, using the calibrated photon number. △ Less

Submitted 24 August, 2015; v1 submitted 21 May, 2015; originally announced May 2015.

Comments: 10 pages, 9 figures

Journal ref: Phys. Rev. B 92, 104508 (2015)

A V-shape superconducting artificial atom based on two inductively coupled transmons

Authors: É. Dumur, B. Küng, A. K. Feofanov, T. Weissl, N. Roch, C. Naud, W. Guichard, O. Buisson

Abstract: Circuit quantum electrodynamics systems are typically built from resonators and two-level artificial atoms, but the use of multi-level artificial atoms instead can enable promising applications in quantum technology. Here we present an implementation of a Josephson junction circuit dedicated to operate as a V-shape artificial atom. Based on a concept of two internal degrees of freedom, the device… ▽ More Circuit quantum electrodynamics systems are typically built from resonators and two-level artificial atoms, but the use of multi-level artificial atoms instead can enable promising applications in quantum technology. Here we present an implementation of a Josephson junction circuit dedicated to operate as a V-shape artificial atom. Based on a concept of two internal degrees of freedom, the device consists of two transmon qubits coupled by an inductance. The Josephson nonlinearity introduces a strong diagonal coupling between the two degrees of freedom that finds applications in quantum non-demolition readout schemes, and in the realization of microwave cross-Kerr media based on superconducting circuits. △ Less

Submitted 7 May, 2015; v1 submitted 20 January, 2015; originally announced January 2015.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 92, 020515 (2015)

Optimization of sample-chip design for stub-matched radio-frequency reflectometry measurements

Authors: S. Hellmüller, M. Pikulski, T. Müller, B. Küng, G. Puebla-Hellmann, A. Wallraff, M. Beck, K. Ensslin, T. Ihn

Abstract: A radio-frequency (rf) matching circuit with an in situ tunable varactor diode used for rf reflectometry measurements in semiconductor nanostructures is investigated and used to optimize the sample-specific chip design. The samples are integrated in a 2-4 GHz stub-matching circuit consisting of a waveguide stub shunted to the terminated coplanar waveguide. Several quantum point contacts fabricated… ▽ More A radio-frequency (rf) matching circuit with an in situ tunable varactor diode used for rf reflectometry measurements in semiconductor nanostructures is investigated and used to optimize the sample-specific chip design. The samples are integrated in a 2-4 GHz stub-matching circuit consisting of a waveguide stub shunted to the terminated coplanar waveguide. Several quantum point contacts fabricated on a GaAs/AlGaAs heterostructure with different chip designs are compared. We show that the change of the reflection coefficient for a fixed change in the quantum point contact conductance can be enhanced by a factor of 3 compared to conventional designs by a suitable electrode geometry. △ Less

Submitted 8 June, 2012; originally announced June 2012.

Journal ref: Appl. Phys. Lett. 101, 042112 (2012);

Quantum dot occupation and electron dwell time in the cotunneling regime

Authors: B. Küng, C. Rössler, M. Beck, J. Faist, T. Ihn, K. Ensslin

Abstract: We present comparative measurements of the charge occupation and conductance of a GaAs/AlGaAs quantum dot. The dot charge is measured with a capacitively coupled quantum point contact sensor. In the single-level Coulomb blockade regime near equilibrium, charge and conductance signals are found to be proportional to each other. We conclude that in this regime, the two signals give equivalent inform… ▽ More We present comparative measurements of the charge occupation and conductance of a GaAs/AlGaAs quantum dot. The dot charge is measured with a capacitively coupled quantum point contact sensor. In the single-level Coulomb blockade regime near equilibrium, charge and conductance signals are found to be proportional to each other. We conclude that in this regime, the two signals give equivalent information about the quantum dot system. Out of equilibrium, we study the inelastic-cotunneling regime. We compare the measured differential dot charge with an estimate assuming a dwell time of transmitted carriers on the dot given by h/E, where E is the blockade energy of first-order tunneling. The measured signal is of a similar magnitude as the estimate, compatible with a picture of cotunneling as transmission through a virtual intermediate state with a short lifetime. △ Less

Submitted 28 August, 2012; v1 submitted 20 April, 2012; originally announced April 2012.

Journal ref: New Journal of Physics vol. 14, p. 083003 (2012)

Single-Particle Excitations Generated by Voltage Pulses

Authors: Fabian Hassler, Bruno Küng, Gordey B. Lesovik, Gianni Blatter

Abstract: We analyze properties of excitations due to voltage pulses applied to a 1D noninteracting electron gas, assuming that the integral of the voltage over time is equal to the unit of flux. We show that the average charge transfer due to such pulses does not depend on the pulse shape. For pulses with a Lorentzian profile, we prove the single-particle nature of the electron and the hole excitations. We analyze properties of excitations due to voltage pulses applied to a 1D noninteracting electron gas, assuming that the integral of the voltage over time is equal to the unit of flux. We show that the average charge transfer due to such pulses does not depend on the pulse shape. For pulses with a Lorentzian profile, we prove the single-particle nature of the electron and the hole excitations. △ Less

Submitted 4 October, 2011; v1 submitted 3 October, 2011; originally announced October 2011.

Comments: 7 pages, 2 figures

Journal ref: AIP Conf. Proc. 1134, 113 (2009)

Irreversibility on the Level of Single-Electron Tunneling

Authors: B. Küng, C. Rössler, M. Beck, M. Marthaler, D. S. Golubev, Y. Utsumi, T. Ihn, K. Ensslin

Abstract: We present a low-temperature experimental test of the fluctuation theorem for electron transport through a double quantum dot. The rare entropy-consuming system trajectories are detected in the form of single charges flowing against the source-drain bias by using time-resolved charge detection with a quantum point contact. We find that these trajectories appear with a frequency that agrees with th… ▽ More We present a low-temperature experimental test of the fluctuation theorem for electron transport through a double quantum dot. The rare entropy-consuming system trajectories are detected in the form of single charges flowing against the source-drain bias by using time-resolved charge detection with a quantum point contact. We find that these trajectories appear with a frequency that agrees with the theoretical predictions even under strong nonequilibrium conditions, when the finite bandwidth of the charge detection is taken into account. △ Less

Submitted 19 January, 2012; v1 submitted 21 July, 2011; originally announced July 2011.

Journal ref: Physical Review X 2, 011001 (2012)

Spatial mapping and manipulation of two tunnel-coupled quantum dots

Authors: Magdalena Huefner, Bruno Kueng, Stephan Schnez, Klaus Ensslin, Thomas Ihn, Matthias Reinwald, Werner Wegscheider

Abstract: The metallic tip of a scanning force microscope operated at 300 mK is used to locally induce a potential in a fully controllable double quantum dot defined via local anodic oxidation in a GaAs/AlGaAs heterostructure. Using scanning gate techniques we record spatial images of the current through the sample for different numbers of electrons on the quantum dots (i.e., for different quantum states).… ▽ More The metallic tip of a scanning force microscope operated at 300 mK is used to locally induce a potential in a fully controllable double quantum dot defined via local anodic oxidation in a GaAs/AlGaAs heterostructure. Using scanning gate techniques we record spatial images of the current through the sample for different numbers of electrons on the quantum dots (i.e., for different quantum states). Owing to the spatial resolution of current maps, we are able to determine the spatial position of the individual quantum dots, and investigate their apparent relative shifts due to the voltage applied to a single gate. △ Less

Submitted 17 June, 2011; originally announced June 2011.

Journal ref: Physical Review B 83, 235326 (2011)

Highly Tunable Hybrid Quantum Dots with Charge Detection

Authors: C. Rössler, B. Küng, S. Dröscher, T. Choi, T. Ihn, K. Ensslin, M. Beck

Abstract: In order to employ solid state quantum dots as qubits, both a high degree of control over the confinement potential as well as sensitive charge detection are essential. We demonstrate that by combining local anodic oxidation with local Schottky-gates, these criteria are nicely fulfilled in the resulting hybrid device. To this end, a quantum dot with adjacent charge detector is defined. After tunin… ▽ More In order to employ solid state quantum dots as qubits, both a high degree of control over the confinement potential as well as sensitive charge detection are essential. We demonstrate that by combining local anodic oxidation with local Schottky-gates, these criteria are nicely fulfilled in the resulting hybrid device. To this end, a quantum dot with adjacent charge detector is defined. After tuning the quantum dot to contain only a single electron, we are able to observe the charge detector signal of the quantum dot state for a wide range of tunnel couplings. △ Less

Submitted 14 September, 2010; originally announced September 2010.

Journal ref: Appl. Phys. Lett. 97, 152109 (2010)

An in-situ tunable radio-frequency quantum point contact

Authors: Thomas Müller, Bruno Küng, Paul Studerus, Sarah Hellmüller, Klaus Ensslin, Thomas Ihn, Matthias Reinwald, Werner Wegscheider

Abstract: Incorporating a variable capacitance diode into a radio-frequency matching circuit allows us to in-situ tune the resonance frequency of an RF quantum point contact, increasing the versatility of the latter as a fast charge sensor of a proximal quantum circuit. The performance of this method is compared in detail to conventional low-frequency charge detection. The approach is also applicable to oth… ▽ More Incorporating a variable capacitance diode into a radio-frequency matching circuit allows us to in-situ tune the resonance frequency of an RF quantum point contact, increasing the versatility of the latter as a fast charge sensor of a proximal quantum circuit. The performance of this method is compared in detail to conventional low-frequency charge detection. The approach is also applicable to other RF-detection schemes, such as RF-SET circuits. △ Less

Submitted 14 September, 2010; v1 submitted 9 September, 2010; originally announced September 2010.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 97, 202104 (2010)

Quantum dots investigated with charge detection techniques

Authors: T. Ihn, Simon Gustavsson, Urszula Gasser, Bruno Küng, Thomas Müller, Roland Schleser, Martin Sigrist, Ivan Shorubalko, Renaud Leturcq, Klaus Ensslin

Abstract: The detection of the quantum dot charge state using a quantum point contact charge detector has opened a new exciting route for the investigation of quantum dot devices in recent years. In particular, time-resolved charge detection allowed the precise measurement of quantum dot shot noise at sub-femtoampere current levels, and the full counting statistics of the current. The technique can be app… ▽ More The detection of the quantum dot charge state using a quantum point contact charge detector has opened a new exciting route for the investigation of quantum dot devices in recent years. In particular, time-resolved charge detection allowed the precise measurement of quantum dot shot noise at sub-femtoampere current levels, and the full counting statistics of the current. The technique can be applied to different material systems and holds promise for the future application in quantum dot based quantum information processing implementations. We review recent experiments employing this charge detection technique, including the self-interference of individual electrons and back-action phenomena. △ Less

Submitted 20 May, 2009; originally announced May 2009.

Noise-induced spectral shift measured in a Double Quantum Dot

Authors: Bruno Küng, Simon Gustavsson, Theodore Choi, Ivan Shorubalko, Thomas Ihn, Silke Schön, Fabian Hassler, Gianni Blatter, Klaus Ensslin

Abstract: We measure the shot noise of a quantum point-contact using a capacitively coupled InAs double quantum dot as an on-chip sensor. Our measurement signals are the (bidirectional) interdot electronic tunneling rates which are determined by means of time-resolved charge sensing. The detector frequency is set by the relative detuning of the energy levels in the two dots. For nonzero detuning, the nois… ▽ More We measure the shot noise of a quantum point-contact using a capacitively coupled InAs double quantum dot as an on-chip sensor. Our measurement signals are the (bidirectional) interdot electronic tunneling rates which are determined by means of time-resolved charge sensing. The detector frequency is set by the relative detuning of the energy levels in the two dots. For nonzero detuning, the noise in the quantum point contact generates inelastic tunneling in the double dot and thus causes an increase in the interdot tunneling rate. Conservation of spectral weight in the dots implies that this increase must be compensated by a decrease in the rate close to zero detuning, which is quantitatively confirmed in our experiment. △ Less

Submitted 21 September, 2009; v1 submitted 23 April, 2009; originally announced April 2009.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 80, 115315 (2009)

Time-resolved charge detection with cross-correlation techniques

Authors: B. Küng, O. Pfäffli, S. Gustavsson, T. Ihn, K. Ensslin, M. Reinwald, W. Wegscheider

Abstract: We present time-resolved charge sensing measurements on a GaAs double quantum dot with two proximal quantum point contact (QPC) detectors. The QPC currents are analyzed with cross-correlation techniques, which enables us to measure dot charging and discharging rates for significantly smaller signal-to-noise ratios than required for charge detection with a single QPC. This allows to reduce the cu… ▽ More We present time-resolved charge sensing measurements on a GaAs double quantum dot with two proximal quantum point contact (QPC) detectors. The QPC currents are analyzed with cross-correlation techniques, which enables us to measure dot charging and discharging rates for significantly smaller signal-to-noise ratios than required for charge detection with a single QPC. This allows to reduce the current level in the detector and therefore the invasiveness of the detection process and may help to increase the available measurement bandwidth in noise-limited setups. △ Less

Submitted 27 February, 2009; v1 submitted 14 October, 2008; originally announced October 2008.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. B 79, 035314 (2009)

Statistical electron excitation in a double quantum dot induced by two independent quantum point contacts

Authors: U. Gasser, S. Gustavsson, B. Küng, K. Ensslin, T. Ihn, D. C. Driscoll, A. C. Gossard

Abstract: We investigate experimentally the influence of current flow through two independent quantum point contacts to a nearby double quantum dot realized in a GaAs-AlGaAs heterostructure. The observed current through the double quantum dot can be explained in terms of coupling to a bosonic bath. The temperature of the bath depends on the power generated by the current flow through the quantum point con… ▽ More We investigate experimentally the influence of current flow through two independent quantum point contacts to a nearby double quantum dot realized in a GaAs-AlGaAs heterostructure. The observed current through the double quantum dot can be explained in terms of coupling to a bosonic bath. The temperature of the bath depends on the power generated by the current flow through the quantum point contact. We identify the dominant absorption and emission mechanisms in a double quantum dot as an interaction with acoustic phonons. The experiment excludes coupling of a double quantum dot to shot noise generated by quantum point contact as the dominant mechanism. △ Less

Submitted 12 February, 2009; v1 submitted 21 August, 2008; originally announced August 2008.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. B 79, 035303 (2009)