Showing 1–14 of 14 results for author: Kärcher, H

A physical optics characterization of the beam shape and sidelobe levels for the Atacama Large Aperture Submillimeter Telescope (AtLAST)

Authors: Roberto Puddu, Patricio A. Gallardo, Tony Mroczkowski, Pierre Dubois-dit-Bonclaude, Manuel Groh, Aleksej Kiselev, Matthias Reichert, Martin Timpe, Claudia Cicone, Hans J. Kaercher, Rolando Dünner

Abstract: (abridged) The Atacama Large Aperture Submillimeter Telescope (AtLAST) is undergoing a design study for a large (50 meter) single-dish submm-wavelength Ritchey-Chrétien telescope to be located 5050 meters above sea level in the Atacama Desert in northern Chile. It will allow for observations covering 30 to 950 GHz. Observing at such high frequencies with a 50~m primary mirror will be challenging,… ▽ More (abridged) The Atacama Large Aperture Submillimeter Telescope (AtLAST) is undergoing a design study for a large (50 meter) single-dish submm-wavelength Ritchey-Chrétien telescope to be located 5050 meters above sea level in the Atacama Desert in northern Chile. It will allow for observations covering 30 to 950 GHz. Observing at such high frequencies with a 50~m primary mirror will be challenging, and has never been attempted thus far. This observational capability demands exquisite control of systematics to ensure a reliable beam shape, and to mitigate the expected sidelobe levels. Among them, critical issues that large telescopes like AtLAST need to deal with are introduced by the panel gap pattern, the secondary mirror supporting struts, mirror deformations produced by thermal and gravitational effects, and Ruze scattering due to surface roughness. Proprietary software such as TICRA-Tools allows for full-wave, complex-field physical optics simulations taking into account these features. Such calculations can be computationally expensive since the mirror surfaces are gridded (meshed) into a fine array in which each element is treated as a current source. If the telescope size is large and the wavelengths are short this may lead to very long running times. Here we present a set of physical optics results that allow us to estimate the performance of the telescope in terms of beam shape, directivity, sidelobes level and stray light. We also discuss how we addressed the computational challenges, and provide caveats on how to shorten the run times. Above all, we conclude that the scattering effects from the gaps and tertiary support structure are minimal, and subdominant to the Ruze scattering. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: Submitted to SPIE Proceedings

The Optical Design Concept for the Atacama Large Aperture Submillimeter Telescope (AtLAST)

Authors: Patricio A. Gallardo, Roberto Puddu, Tony Mroczkowski, Martin Timpe, Pierre Dubois-dit-Bonclaude, Manuel Groh, Matthias Reichert, Claudia Cicone, Hans J. Kaercher

Abstract: The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50-meter) single dish observatory capable of observations across the millimeter/sub-millimeter spectrum, from 30 to 950~GHz. The large primary mirror diameter, the 2-degree field of view and its large 4.7-meter focal surface give AtLAST a high throughput (aperture size times field of… ▽ More The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50-meter) single dish observatory capable of observations across the millimeter/sub-millimeter spectrum, from 30 to 950~GHz. The large primary mirror diameter, the 2-degree field of view and its large 4.7-meter focal surface give AtLAST a high throughput (aperture size times field of view) and grasp (throughput times spectral reach), with the ability to illuminate $>\mathcal{O}(10^7)$ detectors. The optical design concept for AtLAST consists of a numerically optimized two-mirror Ritchey-Chrétien system with an additional flat folding mirror, which enables a quick selection among its planned six instrument positions. We present the optical design concept and discuss the expected optical performance of AtLAST. We then present design concepts that can be implemented in the receiver and instrument optics to correct for astigmatism and mitigate the high degree of curvature of the focal surface in order to recover significant fractions of the geometric field of view at sub-millimeter wavelengths. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Technical requirements flow-down for the concept design of the novel 50-meter Atacama Large Aperture Submm Telescope (AtLAST)

Authors: Matthias Reichert, Martin Timpe, Hans Kaercher, Tony Mroczkowski, Manuel Groh, Aleksej Kiselev, Claudia Cicone, Patricio A. Gallardo, Roberto Puddu, Pamela Klaassen

Abstract: The Atacama Large Aperture Submm Telescope (AtLAST) is a concept for a novel 50-meter class single-dish telescope operating at sub-millimeter and millimeter wavelengths (30-950 GHz). The telescope will provide an unprecedentedly wide field of view (FoV) of 1-2 degree diameter with a large receiver cabin housing six major instruments in Nasmyth and Cassegrain positions. The high observing frequenci… ▽ More The Atacama Large Aperture Submm Telescope (AtLAST) is a concept for a novel 50-meter class single-dish telescope operating at sub-millimeter and millimeter wavelengths (30-950 GHz). The telescope will provide an unprecedentedly wide field of view (FoV) of 1-2 degree diameter with a large receiver cabin housing six major instruments in Nasmyth and Cassegrain positions. The high observing frequencies, combined with the scanning operation movements with up to 3 deg/second, place high demands on the accuracy and stability of the optical and structural components. The design features the introduction of a rocking chair type mount with an iso-statically decoupled main reflector backup structure and an active main reflector surface with a high precision metrology system. The planned site location is in the Chilean Atacama Desert at approximately 5050 meters above sea level, near Llano de Chajnantor. This paper gives an overview of the optical, structural, and mechanical design concepts. It explains the flow-down from key science requirements to technical design decisions as well as showing design analogies from other existing large radio, (sub-)mm, and optical telescopes. △ Less

Submitted 21 August, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Comments: 20 pages. Submitted to the SPIE proceedings

The conceptual design of the 50-meter Atacama Large Aperture Submillimeter Telescope (AtLAST)

Authors: Tony Mroczkowski, Patricio A. Gallardo, Martin Timpe, Aleksej Kiselev, Manuel Groh, Hans Kaercher, Matthias Reichert, Claudia Cicone, Roberto Puddu, Pierre Dubois-dit-Bonclaude, Daniel Bok, Erik Dahl, Mike Macintosh, Simon Dicker, Isabelle Viole, Sabrina Sartori, Guillermo Andrés Valenzuela Venegas, Marianne Zeyringer, Michael Niemack, Sergio Poppi, Rodrigo Olguin, Evanthia Hatziminaoglou, Carlos De Breuck, Pamela Klaassen, Francisco Miguel Montenegro-Montes , et al. (1 additional authors not shown)

Abstract: The (sub)millimeter sky contains a vast wealth of information that is both complementary and inaccessible to other wavelengths. Over half the light we receive is observable at (sub)millimeter wavelengths, yet we have mapped only a small portion of the sky at sufficient spatial resolution and sensitivity to detect and resolve distant galaxies or star forming cores within their large-scale environme… ▽ More The (sub)millimeter sky contains a vast wealth of information that is both complementary and inaccessible to other wavelengths. Over half the light we receive is observable at (sub)millimeter wavelengths, yet we have mapped only a small portion of the sky at sufficient spatial resolution and sensitivity to detect and resolve distant galaxies or star forming cores within their large-scale environments. For decades the astronomical community has highlighted the need for a large, high-throughput (sub-)mm ($λ\sim 0.35-10$ mm) single dish. The Atacama Large Aperture Submillimeter Telescope (AtLAST), with its 50-m aperture and $2^\circ$ maximal field of view, aims to be such a facility. We present here the preliminary design concept for AtLAST, developed through an EU Horizon 2020-funded design study. Our design approach begins with a long lineage of (sub)millimeter telescopes, relies on calculations and simulations to realize the optics, and uses finite element analysis to optimize the designs for the mechanical structure and subsystems. The demanding technical requirements for AtLAST, set by transformative science goals, have motivated the design effort to combine novel concepts with lessons learned from the past experience of previous efforts. The result is an innovative rocking chair design with six instrument bays, two of which are mounted on Nasmyth platforms, inside a large receiver cabin. Ultimately, AtLAST aims to achieve a surface accuracy of $\leq 20~μ$m root mean square half wavefront error, corresponding a Ruze efficiency $>50\%$ at 950~GHz. We conclude that closed-loop metrology of the active primary surface will likely be required to achieve our surface accuracy goal. In the next phase of the project, we will prototype and test such metrology on existing platforms, with a goal of delivering a mature, construction-ready design by the end of this decade. △ Less

Submitted 30 January, 2025; v1 submitted 28 February, 2024; originally announced February 2024.

Comments: Accepted 2025-Jan-14. 28 pages, 22 figures, 6 tables. Supplementary materials that were previously in Appendix B & C can be found on Zenodo at https://zenodo.org/records/14673697

Journal ref: A&A 694, A142 (2025)

The Qitai Radio Telescope

Authors: Na Wang, Qian Xu, Jun Ma, Zhiyong Liu, Qi Liu, Hailong Zhang, Xin Pei, Maozheng Chen, Richard N. Manchester, Kejia Lee, Xingwu Zheng, Hans J. Kärcher, Wulin Zhao, Hongwei Li, Dongwei Li, Martin Süss, Matthias Reichert, Zhongyi Zhu, Congsi Wang, Mingshuai Li, Rui Li, Ning Li, Guljaina Kazezkhan, Wenming Yan, Gang Wu , et al. (3 additional authors not shown)

Abstract: This study presents a general outline of the Qitai radio telescope (QTT) project. Qitai, the site of the telescope, is a county of Xinjiang Uygur Autonomous Region of China, located in the east Tianshan Mountains at an elevation of about 1800 m. The QTT is a fully steerable, Gregorian type telescope with a standard parabolic main reflector of 110 m diameter. The QTT has adopted an um-brella suppor… ▽ More This study presents a general outline of the Qitai radio telescope (QTT) project. Qitai, the site of the telescope, is a county of Xinjiang Uygur Autonomous Region of China, located in the east Tianshan Mountains at an elevation of about 1800 m. The QTT is a fully steerable, Gregorian type telescope with a standard parabolic main reflector of 110 m diameter. The QTT has adopted an um-brella support, homology-symmetric lightweight design. The main reflector is active so that the deformation caused by gravity can be corrected. The structural design aims to ultimately allow high-sensitivity observations from 150 MHz up to 115 GHz. To satisfy the requirements for early scientific goals, the QTT will be equipped with ultra-wideband receivers and large field-of-view mul-ti-beam receivers. A multi-function signal-processing system based on RFSoC and GPU processor chips will be developed. These will enable the QTT to operate in pulsar, spectral line, continuum and Very Long Baseline Interferometer (VLBI) observing modes. Electromagnetic compatibility (EMC) and radio frequency interference (RFI) control techniques are adopted throughout the system design. The QTT will form a world-class observational platform for the detection of low-frequency (nanoHertz) gravitational waves through pulsar timing array (PTA) techniques, pulsar surveys, the discovery of binary black-hole systems, and exploring dark matter and the origin of life in the universe. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Comments: 12 pages, 11 figures, accepted for publication in Science China Physics, Mechanics & Astronomy

Journal ref: Sci China-Phys Mech Astron, 2023, 66: 289512

Progress in the Design of the Atacama Large Aperture Submillimeter Telescope

Authors: Tony Mroczkowski, Claudia Cicone, Matthias Reichert, Patricio Gallardo, Hans Kaercher, Richard Hills, Daniel Bok, Erik Dahl, Pierre Dubois-dit-Bonclaude, Aleksej Kiselev, Martin Timpe, Thomas Zimmerer, Simon Dicker, Mike Macintosh, Pamela Klaassen, Michael Niemack

Abstract: The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50 meter) single dish observatory capable of observations across the millimeter/submillimeter spectrum, from 30~GHz to 1~THz. AtLAST will be sited in Chile at approximately 5100 meters above sea level, high in the Atacama Desert near Llano de Chajnantor. The novel rocking-chair telesc… ▽ More The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50 meter) single dish observatory capable of observations across the millimeter/submillimeter spectrum, from 30~GHz to 1~THz. AtLAST will be sited in Chile at approximately 5100 meters above sea level, high in the Atacama Desert near Llano de Chajnantor. The novel rocking-chair telescope design allows for a unprecedentedly wide field of view (FoV) of 1-2$^\circ$ diameter, a large receiver cabin housing six major instruments, and high structural stability during fast scanning operations (up to $\sim 3^\circ$ per second in azimuth). Here we describe the current status of, and expected outcomes for, the antenna design study, which will be completed in 2024. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: Accepted for the URSI GASS 2023, Sapporo, Japan, 19-26 August 2023. 4 pages, 3 figures

Journal ref: 2023 XXXVth General Assembly and Scientific Symposium of the International Union of Radio Science (URSI GASS), Sapporo, Japan, 2023

ccc-Autoevolutes

Authors: Hermann Karcher, Ekkehard-H. Tjaden

Abstract: ccc-Autoevolutes are closed constant curvature space curves which are their own evolutes. A modified Frenet equation produces constant curvature curves such that the curve on $[0, π]$ is congruent to the evolute on $[π, 2π]$ and vice versa. Closed curves are then congruent to their evolutes. If the ruled surface spanned by the principal normals between curve and evolute is a Möbius band then the c… ▽ More ccc-Autoevolutes are closed constant curvature space curves which are their own evolutes. A modified Frenet equation produces constant curvature curves such that the curve on $[0, π]$ is congruent to the evolute on $[π, 2π]$ and vice versa. Closed curves are then congruent to their evolutes. If the ruled surface spanned by the principal normals between curve and evolute is a Möbius band then the curve is its own evolute. We use symmetries to construct closed curves by solving 2-parameter problems numerically. The smallest autoevolute which we found is a trefoil knot parametrized by three periods $[0, 6π]$.Our smallest closed solution of the ODE is parametrized by two periods. △ Less

Submitted 5 February, 2021; v1 submitted 1 February, 2021; originally announced February 2021.

Comments: Reference corrected. 5 pages, 11 figures, 1 ODE

MSC Class: Differential Geometry

The Atacama Large Aperture Submillimetre Telescope (AtLAST)

Authors: Pamela D. Klaassen, Tony Mroczkowski, Claudia Cicone, Evanthia Hatziminaoglou, Sabrina Sartori, Carlos De Breuck, Sean Bryan, Simon R. Dicker, Carlos Duran, Chris Groppi, Hans Kärcher, Ryohei Kawabe, Kotaro Kohno, James Geach

Abstract: The coldest and densest structures of gas and dust in the Universe have unique spectral signatures across the (sub-)millimetre bands ($ν\approx 30-950$~GHz). The current generation of single dish facilities has given a glimpse of the potential for discovery, while sub-mm interferometers have presented a high resolution view into the finer details of known targets or in small-area deep fields. Howe… ▽ More The coldest and densest structures of gas and dust in the Universe have unique spectral signatures across the (sub-)millimetre bands ($ν\approx 30-950$~GHz). The current generation of single dish facilities has given a glimpse of the potential for discovery, while sub-mm interferometers have presented a high resolution view into the finer details of known targets or in small-area deep fields. However, significant advances in our understanding of such cold and dense structures are now hampered by the limited sensitivity and angular resolution of our sub-mm view of the Universe at larger scales. In this context, we present the case for a new transformational astronomical facility in the 2030s, the Atacama Large Aperture Submillimetre Telescope (AtLAST). AtLAST is a concept for a 50-m-class single dish telescope, with a high throughput provided by a 2~deg - diameter Field of View, located on a high, dry site in the Atacama with good atmospheric transmission up to $ν\sim 1$~THz, and fully powered by renewable energy. We envision AtLAST as a facility operated by an international partnership with a suite of instruments to deliver the transformative science that cannot be achieved with current or in-construction observatories. As an 50m-diameter telescope with a full complement of advanced instrumentation, including highly multiplexed high-resolution spectrometers, continuum cameras and integral field units, AtLAST will have mapping speeds hundreds of times greater than current or planned large aperture ($>$ 12m) facilities. By reaching confusion limits below L$_*$ in the distant Universe, resolving low-mass protostellar cores at the distance of the Galactic Centre, and directly mapping both the cold and the hot (the Sunyaev-Zeldovich effect) circumgalactic medium of galaxies, AtLAST will enable a fundamentally new understanding of the sub-mm Universe. △ Less

Submitted 26 January, 2021; v1 submitted 16 November, 2020; originally announced November 2020.

Comments: 20 pages, 5 figures, to be submitted to SPIE Astronomical telescopes & Instruments 2020, Ground-based and Airborne Telescopes VIII (conference 11445, abstract 290)

Journal ref: Proceedings of the SPIE, Volume 11445, id. 114452F 20 pp. (2020)

Closed Constant Curvature Space Curves

Authors: Hermann Karcher

Abstract: We use ODEs and symmetry arguments to construct closed constant curvature space curves, first on cylinders, next on tori, at last with the Frenet-Serret equations. We use ODEs and symmetry arguments to construct closed constant curvature space curves, first on cylinders, next on tori, at last with the Frenet-Serret equations. △ Less

Submitted 21 April, 2020; originally announced April 2020.

Comments: 7 pages with 8 figures. Earlier examples were pieced together from circle segments and helix segments

MSC Class: 53A04

PointClouds: Distributing Points Uniformly on a Surface

Authors: Richard Palais, Bob Palais, Hermann Karcher

Abstract: The concept of a Point Cloud has played an increasingly important role in many areas of Engineering, Science, and Mathematics. Examples are: LIDAR, 3D-Printing, Data Analysis, Computer Graphics, Machine Learning, Mathematical Visualization, Numerical Analysis, and Monte Carlo Methods. Entering point cloud into Google returns nearly 3.5 million results! A point cloud for a finite volume manifold M… ▽ More The concept of a Point Cloud has played an increasingly important role in many areas of Engineering, Science, and Mathematics. Examples are: LIDAR, 3D-Printing, Data Analysis, Computer Graphics, Machine Learning, Mathematical Visualization, Numerical Analysis, and Monte Carlo Methods. Entering point cloud into Google returns nearly 3.5 million results! A point cloud for a finite volume manifold M is a finite subset or a sequence in M, with the essential feature that it is a representative sample of M. The definition of a point cloud varies with its use, particularly what constitutes being representative. Point clouds arise in many different ways: in LIDAR they are just 3D data captured by a scanning device, while in Monte Carlo applications they are constructed using highly complex algorithms developed over many years. In this article we outline a rigorous mathematical theory of point clouds, based on the classic Cauchy Crofton formula of Integral Geometry and its generalizations. We begin with point clouds on surfaces in R^3, which simplifies the exposition and makes our constructions easily visualizable. We proceed to hyper-surfaces and then sub-manifolds of arbitrary co-dimension in R^n, and finally, using an elegant result of Jurgen Moser to arbitrary smooth manifolds with a volume element. △ Less

Submitted 14 November, 2016; originally announced November 2016.

MSC Class: 53C40; 53C65; 11K45; 76M27

Riemannian Center of Mass and so called karcher mean

Authors: Hermann Karcher

Abstract: The Riemannian center of mass was constructed in [GrKa] (1973). In [GKR1, GKR2, Gr, Ka, BuKa] (1974-1981) it was successfully applied with more refined estimates. Probably in 1990 someone renamed it without justification into karcher mean and references to the older papers were omitted by those using the new name. As a consequence newcomers started to reprove results from the above papers. - Here… ▽ More The Riemannian center of mass was constructed in [GrKa] (1973). In [GKR1, GKR2, Gr, Ka, BuKa] (1974-1981) it was successfully applied with more refined estimates. Probably in 1990 someone renamed it without justification into karcher mean and references to the older papers were omitted by those using the new name. As a consequence newcomers started to reprove results from the above papers. - Here I explain the older history. △ Less

Submitted 3 July, 2014; originally announced July 2014.

MSC Class: 53C20; 01A60

Clifford Algebras and New Isoparametric Hypersurfaces

Authors: Dirk Ferus, Hermann Karcher, Hans-Friedrich Münzner

Abstract: 1. Translated by Thomas E. Cecil, Department of Mathematics and Computer Science, College of the Holy Cross, Worcester, MA 01610, USA; E-mail address: [email protected] 2. Typed by Wenjiao Yan, School of Mathematical Sciences, Laboratory of Mathematics and Complex Systems, Beijing Normal University, Beijing 100875, China. E-mail address: [email protected] 1. Translated by Thomas E. Cecil, Department of Mathematics and Computer Science, College of the Holy Cross, Worcester, MA 01610, USA; E-mail address: [email protected] 2. Typed by Wenjiao Yan, School of Mathematical Sciences, Laboratory of Mathematics and Complex Systems, Beijing Normal University, Beijing 100875, China. E-mail address: [email protected] △ Less

Submitted 12 December, 2011; originally announced December 2011.

The Singly Periodic Genus-One Helicoid

Authors: David Hoffman, Hermann Karcher, Fusheng Wei

Abstract: We prove the existence of a complete, embedded, singly periodic minimal surface, whose quotient by vertical translations has genus one and two ends. The existence of this surface was announced in our paper in {\it Bulletin of the AMS}, 29(1):77--84, 1993. Its ends in the quotient are asymptotic to one full turn of the helicoid, and, like the helicoid, it contains a vertical line. Modulo vertical… ▽ More We prove the existence of a complete, embedded, singly periodic minimal surface, whose quotient by vertical translations has genus one and two ends. The existence of this surface was announced in our paper in {\it Bulletin of the AMS}, 29(1):77--84, 1993. Its ends in the quotient are asymptotic to one full turn of the helicoid, and, like the helicoid, it contains a vertical line. Modulo vertical translations, it has two parallel horizontal lines crossing the vertical axis. The nontrivial symmetries of the surface, modulo vertical translations, consist of: $180^\circ$ rotation about the vertical line; $180^\circ$ rotation about the horizontal lines (the same symmetry); and their composition. △ Less

Submitted 16 May, 1996; originally announced May 1996.

Report number: MSRI 1996-037

Complete embedded minimal surfaces of finite total curvature

Authors: David Hoffman, Hermann Karcher

Abstract: We survey what is known about minimal surfaces in $\bold R^3 $ that are complete, embedded, and have finite total curvature. The only classically known examples of such surfaces were the plane and the catenoid. The discovery by Costa, early in the last decade, of a new example that proved to be embedded sparked a great deal of research in this area. Many new examples have been found, even famili… ▽ More We survey what is known about minimal surfaces in $\bold R^3 $ that are complete, embedded, and have finite total curvature. The only classically known examples of such surfaces were the plane and the catenoid. The discovery by Costa, early in the last decade, of a new example that proved to be embedded sparked a great deal of research in this area. Many new examples have been found, even families of them, as will be described below. The central question has been transformed from whether or not there are any examples except surfaces of rotation to one of understanding the structure of the space of examples. △ Less

Submitted 8 August, 1995; originally announced August 1995.

Report number: MSRI 1995-064