Showing 1–36 of 36 results for author: Juel, A

Interface Fragmentation via Horizontal Vibration: A Pathway to Scalable Monodisperse Emulsification

Authors: Linfeng Piao, Anne Juel

Abstract: We present a scalable method for producing monodisperse microscale emulsions in a container holding two stably stratified layers of immiscible liquids by applying horizontal vibration. Our experiments and theoretical modelling show that the critical non-dimensional acceleration for regular droplet formation is governed by a shear-dominated breakup mechanism, which scales as $N^{-1/2} ω^{*3/2}$, wh… ▽ More We present a scalable method for producing monodisperse microscale emulsions in a container holding two stably stratified layers of immiscible liquids by applying horizontal vibration. Our experiments and theoretical modelling show that the critical non-dimensional acceleration for regular droplet formation is governed by a shear-dominated breakup mechanism, which scales as $N^{-1/2} ω^{*3/2}$, where $N$ is the viscosity ratio and $ω^{*}$ is the frequency of forcing on the viscous-capillary scale. The droplet diameter can be easily controlled by varying the forcing parameters, thus demonstrating this vibrational configuration as a scalable alternative to microfluidics. △ Less

Submitted 9 June, 2025; originally announced June 2025.

Comments: 6 pages, 6 figures

On the oscillatory dynamics of a Saffman--Taylor finger with a bubble at its tip

Authors: Jack Lawless, Andrew L. Hazel, Anne Juel

Abstract: The complex behaviour of air-liquid interfaces driven into Hele-Shaw channels at high speeds could arise from oscillatory dynamics; yet, both the physical and dynamical mechanisms that lead to interfacial oscillations remain unclear. We extend the experiments by Couder \textit{et. al.} (\textit{Phys. Rev. A}, vol. 34, 1986, p. 5175) to present a systematic investigation of the dynamics that resu… ▽ More The complex behaviour of air-liquid interfaces driven into Hele-Shaw channels at high speeds could arise from oscillatory dynamics; yet, both the physical and dynamical mechanisms that lead to interfacial oscillations remain unclear. We extend the experiments by Couder \textit{et. al.} (\textit{Phys. Rev. A}, vol. 34, 1986, p. 5175) to present a systematic investigation of the dynamics that result when a small air bubble is placed at the tip of a steadily propagating air finger in a Hele-Shaw channel. The system can exhibit steady and oscillatory behaviour, and we show that these different behaviours each occur in well-defined regions of the phase space defined by flow rate and bubble size. For sufficiently large flow rates, periodic finger oscillations give way to disordered dynamics characterised by an irregular meandering of the finger's tip. We demonstrate that at a fixed flow rate, the oscillations commence when the bubble size is increased sufficiently so that the decreased in-plane curvature of the bubble tip matches the in-plane curvature of the finger tip. The equality between the two in-plane curvatures causes the axial pressure gradient across the bubble, which drives the finger, to vanish, thus rendering the finger susceptible to lateral perturbations. Differing timescales for finger and bubble restoral under perturbation allow sustained oscillations to develop in the finger-bubble system. The oscillations cease when the bubble is sufficiently large that it can act as the tip of a compound finger. The disordered dynamics at high flow rates are consistent with the transient exploration of unstable periodic states, which suggests that similar dynamics may underlie the observed disordered dynamics in viscous fingering. △ Less

Submitted 31 May, 2025; originally announced June 2025.

Comments: 17 pages, 18 figures

From fluttering to drifting in inertialess sedimentation of achiral particles

Authors: Christian Vaquero-Stainer, Tymoteusz Miara, Anne Juel, Matthias Heil, Draga Pihler-Puzović

Abstract: There has been much recent interest in the chiral motion of achiral particles that sediment in a viscous fluid in a regime where inertial effects can be neglected. This occurs in a broad range of applications such as those involving biological objects like algae, ultra-thin graphene flakes, or colloidal suspensions. It is known that articles with two planes of symmetry can be categorised as ``sett… ▽ More There has been much recent interest in the chiral motion of achiral particles that sediment in a viscous fluid in a regime where inertial effects can be neglected. This occurs in a broad range of applications such as those involving biological objects like algae, ultra-thin graphene flakes, or colloidal suspensions. It is known that articles with two planes of symmetry can be categorised as ``settlers'', ``drifters'' or ``flutterers'', where the latter sediment along chiral trajectories despite their achiral shapes. Here we analyse the sedimentation of circular disks bent into a U-shape (``flutterers'') and show how their behaviour changes when we break one of their symmetries by pinching the disks along their axis. The ``fluttering'' behaviour is found to be robust to such shape changes, with the trajectories now evolving towards helical paths. However, the behaviour changes when the degree of pinching becomes too strong, at which point the particles become ``drifters'' which sediment steadily without rotation. We establish criteria for the transition between the two types of behaviour and confirm our predictions in experiments. Finally, we discuss the implications of our observations for the dispersion of dilute suspensions made of such particles. △ Less

Submitted 30 April, 2025; originally announced April 2025.

Advancing sustainable energy solutions with microfluidic porous media

Authors: Wenhai Lei, Yuankai Yang, Shuo Yang, Ge Zhang, Jenna Poonoosamy, Anne Juel, Yves Meheust, Shervin Bagheria, Moran Wang

Abstract: The transition to a sustainable, low-carbon energy future requires transformative advancements in energy and environmental technologies. Carbon capture and sequestration, underground hydrogen storage, and nuclear waste geological disposal will be central aspects of a sustainable energy future, both for mitigating CO2 emissions and providing green energy. A comprehensive understanding of multiphase… ▽ More The transition to a sustainable, low-carbon energy future requires transformative advancements in energy and environmental technologies. Carbon capture and sequestration, underground hydrogen storage, and nuclear waste geological disposal will be central aspects of a sustainable energy future, both for mitigating CO2 emissions and providing green energy. A comprehensive understanding of multiphase flow through porous media, along with reactive transport and microbial activities, is essential for assessing the feasibility and managing the risks of these technologies. Microfluidic porous media platforms have emerged as powerful tools for the direct visualization of multiphase reactive flow in porous media and eventually optimizing these multiple physicochemical and biological processes. This review highlights critical scientific challenges associated with these sustainable energy solutions and summarizes the state-of-the-art microfluidic techniques for studying the interplay between multiphase flow, reactive transport, and biological effects in porous media. We provide a comprehensive overview of how these microfluidic approaches enhance the understanding of fundamental pore-scale dynamics and bridge the gap between pore-scale events and large-scale processes. This review is expected to promote both experimental and theoretical understanding of multiphase reactive flow in porous media, thereby informing material design, process optimization, and predictive modeling for scalable implementation. By fostering interdisciplinary collaboration across microfluidics, fluid mechanics, geophysics, materials science, and subsurface engineering, we hope to accelerate innovation and advance sustainable energy solutions. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Comments: 34 pages, 20 figures, an invited review paper for Lab on a Chip

Construction of a Small-Scale Vacuum Generation System and Using It as an Educational Device to Demonstrate Features of the Vacuum

Authors: Osama A. Marzouk, Walid Ali Marjan Haje Rhaim Jul, Amjad Masoud Khalfan Al Jabri, Hamed Aamir Mohammed Aamir Al-ghaithi

Abstract: We developed a vacuum generation system composed of a reciprocating compressor (3 tons of refrigeration) with an inverted-function that is ready to be hooked flexibly to a gas-tight container to create an evacuated enclosed atmosphere, without strict limitation of the size of that container. The evacuated container (or vacuum chamber) can serve in different purposes such as educational demonstrati… ▽ More We developed a vacuum generation system composed of a reciprocating compressor (3 tons of refrigeration) with an inverted-function that is ready to be hooked flexibly to a gas-tight container to create an evacuated enclosed atmosphere, without strict limitation of the size of that container. The evacuated container (or vacuum chamber) can serve in different purposes such as educational demonstration of the vacuum properties, extraction of perfumes from herbal resources, and preserving food. We tested the device and found it can reach a vacuum level of 26 inches of mercury in an environment with an atmospheric pressure of 28.5 inches of mercury. We compared the performance of our vacuum device to a rotary-vane vacuum pump of 1/4 horsepowers and found that the vacuum pump reaches a set test vacuum level of 25 inches of mercury before the compressor. We then demonstrated experimentally some features of the vacuum using the inverted compressor or the vane vacuum pump. These experiments serve some topics in physics for school students as well as two core subjects of mechanical engineering, namely fluid mechanics and thermodynamics. △ Less

Submitted 1 February, 2025; originally announced February 2025.

Comments: 11 pages, 8 figures, 1 table, published journal article, peer-reviewed, open access

MSC Class: 97M50

Journal ref: International Journal of Contemporary Education,1,1-11 (2018)

Wall-damped Faraday waves in horizontally oscillating two-layer fluid flows

Authors: Linfeng Piao, Anne Juel

Abstract: We study experimentally the onset of Faraday waves near the endwalls of rectangular vessel containing two stably-stratified fluid layers, subject to horizontal oscillations. These subharmonic waves (SWs) are excited, because the horizontal inertial forcing drives a harmonic propagating wave which displaces the interface in the vertical direction at the endwalls. We find that the onset of SWs is re… ▽ More We study experimentally the onset of Faraday waves near the endwalls of rectangular vessel containing two stably-stratified fluid layers, subject to horizontal oscillations. These subharmonic waves (SWs) are excited, because the horizontal inertial forcing drives a harmonic propagating wave which displaces the interface in the vertical direction at the endwalls. We find that the onset of SWs is regulated by a balance between capillary and viscous forces, where the rate of damping is set by the Stokes layer thickness at the wall rather than the wavelength of the SWs. We model the onset of SWs with a weakly-damped Mathieu equation and find that the dimensional critical acceleration scales as $ν_m^{1/2} ω^{3/2}$, where $ν_m$ is the mean viscosity and $ω$ is the frequency of forcing, in excellent agreement with the experiment over a wide range of parameters. △ Less

Submitted 18 October, 2024; originally announced October 2024.

Comments: 10 pages, 6 figures

Journal ref: J. Fluid Mech. 1002 (2025) R1

U-shaped disks in Stokes flow: Chiral sedimentation of a non-chiral particle

Authors: Christian Vaquero-Stainer, Tymoteusz Miara, Anne Juel, Draga Pihler-Puzović, Matthias Heil

Abstract: We study the sedimentation of U-shaped circular disks in the Stokes limit of vanishing inertia. We simulate the flow past such disks using a finite-element-based solution of the 3D Stokes equations, accounting for the integrable singularities that develop along their edges. We show that the purely vertical sedimentation of such disks in their upright- [upside-down-] U orientation is unstable to pe… ▽ More We study the sedimentation of U-shaped circular disks in the Stokes limit of vanishing inertia. We simulate the flow past such disks using a finite-element-based solution of the 3D Stokes equations, accounting for the integrable singularities that develop along their edges. We show that the purely vertical sedimentation of such disks in their upright- [upside-down-] U orientation is unstable to perturbations about their pitching [rolling] axes. The instability is found to depend only weakly on the size of the container in which the disks sediment, allowing us to analyse their behaviour based on the resistance matrix which governs the evolution of the disk's six rigid-body degrees of freedom in an unbounded fluid. We show that the governing equations can be reduced to two ODEs which describe the disk's inclination against the direction of gravity. A phase-plane analysis, results of which are in good agreement with experiments, reveals that the two instabilities generally cause the disk to sediment along complex spiral trajectories while it alternates between pitching- and rolling-dominated motions. The chirality of the trajectories is set by the initial conditions rather than the (non-chiral) shape of the disk. For certain initial orientations, the disk retains its inclination and sediments along a perfectly helical path. The observed behaviour is fundamentally different from that displayed by flat circular disks which sediment without any reorientation. We therefore study the effect of variations in the disk's curvature to show how in the limit of vanishing curvature the behaviour of a flat disk is recovered. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 27 pages, 12 figures

Journal ref: J. Fluid Mech. 999 (2024) A71

Periodic dynamics in viscous fingering

Authors: Jack Lawless, Andrew L. Hazel, Anne Juel

Abstract: The displacement of a viscous liquid by air in the narrow gap between two parallel plates - a Hele-Shaw channel - is an exemplar of complex pattern formation. Typically, bubbles or fingers of air propagate steadily at low values of the driving parameter. However, as the driving parameter increases, they can exhibit disordered pattern-forming dynamics. In this paper, we demonstrate experimentally t… ▽ More The displacement of a viscous liquid by air in the narrow gap between two parallel plates - a Hele-Shaw channel - is an exemplar of complex pattern formation. Typically, bubbles or fingers of air propagate steadily at low values of the driving parameter. However, as the driving parameter increases, they can exhibit disordered pattern-forming dynamics. In this paper, we demonstrate experimentally that a remote perturbation of the bubble's tip can drive time-periodic bubble propagation: a fundamental building block of complex unsteady dynamics. We exploit the propensity of a group of bubbles to self-organise into a fixed spatial arrangement in a Hele-Shaw channel with a centralised depth-reduction in order to apply a sustained perturbation to a bubble's shape as it propagates. We find that the bubble with a perturbed shape begins to oscillate after the system undergoes a supercritical Hopf bifurcation upon variation of the tip perturbation and dimensionless flow rate. The oscillation cycle features the splitting of the bubble's tip and advection of the resulting finger-like protrusion along the bubble's length until it is absorbed by the bubble's advancing rear. The restoral of the bubble's tip follows naturally because the system is driven by a fixed flow rate and the perturbed bubble is attracted to the weakly unstable, steadily propagating state that is set by the ratio of imposed viscous and capillary forces. Our results suggest a generic mechanism for time-periodic dynamics of propagating curved fronts subject to a steady shape perturbation. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Comments: 14 pages, 12 figures

Light-scattering reconstruction of transparent shapes using neural networks

Authors: Tymoteusz Miara, Draga Pihler-Puzović, Matthias Heil, Anne Juel

Abstract: We propose a cheap non-intrusive high-resolution method of visualising transparent or translucent objects which may translate, rotate and shapeshift. We propose a method of reconstructing a strongly deformed time-evolving surface from a time-series of noisy clouds of points using a lightweight neural network. We benchmark the method against three different geometries and varying levels of noise an… ▽ More We propose a cheap non-intrusive high-resolution method of visualising transparent or translucent objects which may translate, rotate and shapeshift. We propose a method of reconstructing a strongly deformed time-evolving surface from a time-series of noisy clouds of points using a lightweight neural network. We benchmark the method against three different geometries and varying levels of noise and find that the Gaussian curvature is accurately recovered when the noise level is below $2\%$ of the diameter of the surface and the data from distinct regions of the surface do not overlap. △ Less

Submitted 8 December, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Peeling fingers in an elastic Hele-Shaw channel

Authors: J. V. Fontana, C. Cuttle, D. Pihler-Puzovic, A. L. Hazel, A. Juel

Abstract: Using experiments and a depth-averaged numerical model, we study instabilities of two-phase flows in a Hele-Shaw channel with an elastic upper boundary and a non-uniform cross-section prescribed by initial collapse. Experimentally, we find increasingly complex and unsteady modes of air-finger propagation as the dimensionless bubble speed, Ca, and level of collapse are increased, including pointed… ▽ More Using experiments and a depth-averaged numerical model, we study instabilities of two-phase flows in a Hele-Shaw channel with an elastic upper boundary and a non-uniform cross-section prescribed by initial collapse. Experimentally, we find increasingly complex and unsteady modes of air-finger propagation as the dimensionless bubble speed, Ca, and level of collapse are increased, including pointed fingers, indented fingers and the feathered modes first identified by Cuttle et al.(J. Fluid Mech., vol. 886, 2020, A20). By introducing a measure of the viscous contribution to finger propagation, we identify a Ca threshold beyond which viscous forces are superseded by elastic effects. Quantitative prediction of this transition between 'viscous' and 'elastic' reopening regimes across levels of collapse establishes the fidelity of the numerical model. In the viscous regime, we recover the non-monotonic dependence on Ca of the finger pressure, which is characteristic of benchtop models of airway reopening. To explore the elastic regime numerically, we extend the depth-averaged model introduced by Fontana et al. (J. Fluid Mech., vol. 916, 2021, A27) to include an artificial disjoining pressure which prevents the unphysical self-intersection of the interface. Using time simulations, we capture for the first time the majority of experimental finger dynamics, including feathered modes. We show that these disordered states continually evolve, with no evidence of convergence to steady or periodic states. We find that the steady bifurcation structure satisfactorily predicts the bubble pressure as a function of Ca, but that it does not provide sufficient information to predict the transition to unsteady dynamics which appears strongly nonlinear. △ Less

Submitted 29 February, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 28 pages, 15 figures

Robust fabrication of ultra-soft tunable PDMS microcapsules as a biomimetic model for red blood cells

Authors: Qi Chen, Naval Singh, Kerstin Schirrmann, Qi Zhou, Igor Chernyavsky, Anne Juel

Abstract: Microcapsules with liquid cores encapsulated by thin membranes have many applications in science, medicine and industry. In this paper, we design a suspension of microcapsules which flow and deform like red blood cells (RBCs), as a valuable tool to investigate microhaemodynamics. A reconfigurable and easy-to-assemble 3D nested glass capillary device is used to robustly fabricate water-oil-water do… ▽ More Microcapsules with liquid cores encapsulated by thin membranes have many applications in science, medicine and industry. In this paper, we design a suspension of microcapsules which flow and deform like red blood cells (RBCs), as a valuable tool to investigate microhaemodynamics. A reconfigurable and easy-to-assemble 3D nested glass capillary device is used to robustly fabricate water-oil-water double emulsions which are then converted into spherical microcapsules with hyperelastic membranes by cross-linking the polydimethylsiloxane (PDMS) layer coating the droplets. The resulting capsules are monodisperse to within 1% and can be made in a wide range of size and membrane thickness. We use osmosis to deflate by 36% initially spherical capsules of diameter 350 μm and a membrane thickness of 4% of their radius, in order to match the reduced volume of biconcave RBCs. We compare the propagation of initially spherical and deflated capsules under constant volumetric flow in cylindrical capillaries of different confinements. We find that only deflated capsules deform broadly similarly to RBCs over a similar range of capillary numbers (Ca) -- the ratio of viscous to elastic forces. Similarly to the RBCs, the microcapsules transition from a symmetric 'parachute' to an asymmetric 'slipper'-like shape as Ca increases within the physiological range, demonstrating intriguing confinement-dependent dynamics. In addition to biomimetic RBC properties, high-throughput fabrication of tunable ultra-soft microcapsules could be further functionalized and find applications in other areas of science and engineering △ Less

Submitted 21 February, 2023; v1 submitted 19 February, 2023; originally announced February 2023.

Comments: 14 pages, 10 figures

Stable bubble formations in a Hele-Shaw channel

Authors: Jack Lawless, Jack S. Keeler, Andrew L. Hazel, Anne Juel

Abstract: Deformable bubbles propagated by the flow of a viscous liquid in a planar Hele-Shaw channel of uniform depth tend to travel steadily along the channel's streamwise axis and pairs of neighbouring bubbles will either separate or coalesce because an individual bubble's propagation speed increases monotonically with its size. Thus, any group of bubbles will eventually rearrange itself in order of decr… ▽ More Deformable bubbles propagated by the flow of a viscous liquid in a planar Hele-Shaw channel of uniform depth tend to travel steadily along the channel's streamwise axis and pairs of neighbouring bubbles will either separate or coalesce because an individual bubble's propagation speed increases monotonically with its size. Thus, any group of bubbles will eventually rearrange itself in order of decreasing size and all of the bubbles will separate. We show that, by introducing a small geometric perturbation to the channel in the form of an axially-uniform depth reduction along its centreline, the system supports a multitude of stable bubble formations and this can disrupt the usual reordering by bubble size. The constituent bubbles of a stable formation lie in alternation on opposite sides of the depth-perturbation, retain fixed shapes and propagate steadily at the same speed. A stable formation is always led by the smallest of its constituent bubbles, which would be the slowest bubble in isolation. The leading bubble propagates as if it were isolated and the trailing bubbles reduce their speeds by adjusting their shapes and overlaps of the depth-perturbation in the perturbation fields of their preceding nearest-neighbours in order to match that of the leading bubble. The trailing bubbles can be arranged in any order and, hence, the number of stable formations increases factorially as the number of bubbles is increased. △ Less

Submitted 29 February, 2024; v1 submitted 2 February, 2023; originally announced February 2023.

Comments: 24 pages, 19 figures

The propagation of air fingers into an elastic branching network

Authors: Haolin Li, Anne Juel, Finn Box, Draga Pihler-Puzovic

Abstract: We study experimentally the propagation of an air finger through the Y-bifurcation of an elastic, liquid-filled Hele-Shaw channel, as a benchtop model of airway reopening. With channel compliance provided by an elastic upper boundary, we can impose collapsed channel configurations into which we inject air with constant volume-flux. We typically observe steady finger propagation in the main channel… ▽ More We study experimentally the propagation of an air finger through the Y-bifurcation of an elastic, liquid-filled Hele-Shaw channel, as a benchtop model of airway reopening. With channel compliance provided by an elastic upper boundary, we can impose collapsed channel configurations into which we inject air with constant volume-flux. We typically observe steady finger propagation in the main channel, which is lost ahead of the Y-bifurcation but subsequently recovered in the daughter channels. At low levels of initial collapse, steady finger shapes and bubble pressure in the daughter channels map onto those in the main channel, despite small differences in initial collapse in different parts of the Y-channel. However, at higher levels of initial collapse where the elastic sheet almost touches the bottom boundary of the channel, experimentally indistinguishable fingers in the main channel can lead to multiple states of reopening of the daughter channels. The downstream distance at which steady propagation is recovered in the daughter channels also varies considerably with injection flow rate and initial collapse because of a transition in the mechanics regulating finger propagation. We find that the characteristic time and length-scales of this recovery are largest in the regime where viscous and surface tension forces dominate at low flow rate and/or low initial collapse, and that they decrease towards a constant plateau reached in the limit where elastic and surface tension forces balance at high flow rate and/or high initial collapse. Our findings suggest that practical networks are unlikely to comprise long enough channels for steady state propagation to remain established. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: 36 pages, 13 fingers

The interaction of multiple bubbles in a Hele-Shaw channel

Authors: J. S. Keeler, A. Gaillard, J. Lawless, A. B. Thompson, A. Juel, A. Hazel

Abstract: We study the dynamics of two air bubbles driven by the motion of a suspending viscous fluid in a Hele-Shaw channel with a small elevation along its centreline via physical experiment and numerical simulation of a depth-averaged model. For a single-bubble system we establish that, in general, bubble propagation speed monotonically increases with bubble volume so that two bubbles of different sizes,… ▽ More We study the dynamics of two air bubbles driven by the motion of a suspending viscous fluid in a Hele-Shaw channel with a small elevation along its centreline via physical experiment and numerical simulation of a depth-averaged model. For a single-bubble system we establish that, in general, bubble propagation speed monotonically increases with bubble volume so that two bubbles of different sizes, in the absence of any hydrodynamic interactions will either coalesce or separate in a finite time. However our experiments indicate that the bubbles interact and that an unstable two-bubble state is responsible for the eventual dynamical outcome: coalescence or separation. These results motivate us to develop an edge-tracking routine and calculate these weakly unstable two-bubble steady states from the governing equations. The steady states consist of pairs of `aligned' bubbles that appear on the same side of the centreline with the larger bubble leading. We also discover, through time-simulations and physical experiment, another class of two-bubble states which, surprisingly, consist of stable two-bubble steady states. In contrast to the `aligned' steady states, these bubbles appear either side of the centreline and are `offset' from each other. We calculate the bifurcation structures of both classes of steady states as the flow-rate and bubble volume ratio is varied. We find that they exhibit intriguing similarities to the single-bubble bifurcation structure, which has implications for the existence of $n$-bubble steady states. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Comments: 17 pages

Fluidisation of yield stress fluids under vibration

Authors: A. Garg, N. Bergemann, B. Smith, M. Heil, A. Juel

Abstract: Motivated by the industrial processing of chocolate, we study experimentally the fluidisation of a sessile drop of yield-stress fluid on a pre-existing layer of the same fluid under vertical sinusoidal oscillations. We compare the behaviours of molten chocolate and Carbopol which are both shear-thinning with a similar yield stress but exhibit very different elastic properties. We find that these m… ▽ More Motivated by the industrial processing of chocolate, we study experimentally the fluidisation of a sessile drop of yield-stress fluid on a pre-existing layer of the same fluid under vertical sinusoidal oscillations. We compare the behaviours of molten chocolate and Carbopol which are both shear-thinning with a similar yield stress but exhibit very different elastic properties. We find that these materials spread when the forcing acceleration exceeds a threshold which is determined by the initial deposition process. However, they exhibit very different spreading behaviours: whereas chocolate exhibits slow long-term spreading, the Carbopol drop rapidly relaxes its stress by spreading to a new equilibrium shape with an enlarged footprint. This spreading is insensitive to the history of the forcing. In addition, the Carbopol drop performs large-amplitude oscillations with the forcing frequency, both above and below the threshold. We investigate these viscoelastic oscillations and provide evidence of complex nonlinear viscoelastic behaviour in the vicinity of the spreading threshold. In fact, for forcing accelerations greater than the spreading threshold, our drop automatically adjusts its shape to remain at the yield stress. We discuss how our vibrated-drop experiment offers a new and powerful approach to probing the yield transition in elastoviscoplastic fluids. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 38 pages, 22 figures

Sorting of capsules according to their stiffness: from principle to application

Authors: Edgar Haner, Doriane Vesperini, Anne-Virginie Salsac, Anne Le Goff, Anne Juel

Abstract: We assess experimentally the ability of a simple flow-based sorting device, recently proposed numerically by [Zhu et al., Soft Matter, 2014, 10, 7705-7711], to separate capsules according to their stiffness. The device consists of a single pillar with a half-cylinder cross-section which partially obstructs a flow channel so that initially centred, propagating capsules deform and circumvent the obs… ▽ More We assess experimentally the ability of a simple flow-based sorting device, recently proposed numerically by [Zhu et al., Soft Matter, 2014, 10, 7705-7711], to separate capsules according to their stiffness. The device consists of a single pillar with a half-cylinder cross-section which partially obstructs a flow channel so that initially centred, propagating capsules deform and circumvent the obstacle into an expanding channel (or diffuser). We perform experiments with millimetric capsules of fixed size which indicate that the deviation of the capsule in the diffuser varies monotonically with a capillary number - the ratio of viscous to elastic stresses - where the elastic stresses are measured independently to include the effects of pre-inflation, membrane thickness and material properties. We find that soft capsules with resistance to deformation differing by a factor of 1.5 can be reliably separated in the diffuser but that experimental variability increases significantly with capsule stiffness. We extend the study to populations of microcapsules with size polydispersity. We find that the combined effects of increasing capsule deformability and relative constriction of the device with increasing capsule size enable the tuning of the imposed flow so that capsules can be separated based on their shear modulus but irrespectively of their size. △ Less

Submitted 29 December, 2020; originally announced December 2020.

Comments: 26 pages, 7 figures

Self-assembly of coated microdroplets at the sudden expansion of a microchannel

Authors: Kerstin Schirrmann, Gabriel Cáceres-Aravena, Anne Juel

Abstract: We report observations of the self-assembly of coated droplets into regular clusters at the sudden expansion of a microfluidic channel. A double emulsion consisting of a regular train of coated microdroplets was created upstream of the channel expansion, so that the inter-drop distance, droplet length, velocity and coating thickness could be varied by imposing different inlet pressures, albeit not… ▽ More We report observations of the self-assembly of coated droplets into regular clusters at the sudden expansion of a microfluidic channel. A double emulsion consisting of a regular train of coated microdroplets was created upstream of the channel expansion, so that the inter-drop distance, droplet length, velocity and coating thickness could be varied by imposing different inlet pressures, albeit not independently. Provided that the enlarged channel remains sufficiently confined to prohibit propagation in double file, droplets can assemble sequentially into regular linear clusters at the expansion. Droplets join a cluster via the coalescence of their coating film with that of the group ahead. This coalescence occurs when the droplets approach each other to within a critical distance at the expansion, enabled by hydrodynamic interactions within the train. Clusters comprising a finite number of droplets are obtained because reconfiguration of the droplet assembly during coalescence increases the distance to the following droplet. Decreasing the inter-drop distance increases the cluster size up to a maximum value beyond which continuous clusters form. Formalising these observations in a simple model reveals that clusters of any size are possible but that they occur for increasingly narrow ranges of parameter values. Our experimental observations suggests that background experimental fluctuations limit the maximum discrete cluster size in practice. This method of self-assembly offers a robust alternative to flow focusing for encapsulating multiple cores in a single coating film and the potential to build more complex colloidal building blocks by de-confining the clusters. △ Less

Submitted 3 October, 2020; originally announced October 2020.

Comments: 12 pages, 8 figures

The engulfment of aqueous droplets on perfectly wetting oil layers

Authors: Callum Cuttle, Alice B. Thompson, Draga Pihler-Puzović, Anne Juel

Abstract: Place a droplet of mineral oil on water and the oil will spread to cover the water surface in a thin film -- a phenomenon familiar to many, owing to the rainbow-faced puddles left behind leaking buses on rainy days. In this paper we study the everted problem: an aqueous droplet deposited onto a deep layer of silicone oil. As it is energetically favourable for the oil phase to spread to cover the d… ▽ More Place a droplet of mineral oil on water and the oil will spread to cover the water surface in a thin film -- a phenomenon familiar to many, owing to the rainbow-faced puddles left behind leaking buses on rainy days. In this paper we study the everted problem: an aqueous droplet deposited onto a deep layer of silicone oil. As it is energetically favourable for the oil phase to spread to cover the droplet surface completely, the droplet is ultimately engulfed in the oil layer. We present a detailed study of engulfment dynamics, from the instant the droplet first impacts the oil surface until it finally sediments into the less dense oil. We study a broad range of droplet sizes (micrometric to millimetric) and oil kinematic viscosities ($10^2$ to $10^5$ cSt), corresponding to a viscosity-dominated parameter regime with relevance to oil spills. Our investigation primarily examines droplet engulfment dynamics over two distinct stages: a rapid earlier stage in which the droplet is almost entirely submerged, driven by capillary forces in the oil surface, and cloaked by a thin layer of oil; and a much slower later stage in which gravity pulls on the drop adhered to the oil surface, thus driving a peeling flow. This means that gravitational effects are essential to complete the engulfmet of the droplet, even for micrometric droplets. We observe the longest engulfment times for droplets of intermediate size. Experiments at fixed droplet size reveal a power law dependence of engulfment time on oil kinematic viscosity. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Comments: 29 pages, 16 figures. Submitted to the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. 915 (2021) A66

Modelling finger propagation in elasto-rigid channels

Authors: J. V. Fontana, A. Juel, N. Bergemann, M. Heil, A. L. Hazel

Abstract: We conduct a theoretical study of a two-phase-fluid-structure interaction problem in which air is driven at constant volume flux into a liquid-filled Hele-Shaw channel whose upper boundary is an elastic sheet. A depth-averaged model in the frame of reference of the advancing air-liquid interface is used to investigate the steady and unsteady interface propagation modes via numerical simulation. In… ▽ More We conduct a theoretical study of a two-phase-fluid-structure interaction problem in which air is driven at constant volume flux into a liquid-filled Hele-Shaw channel whose upper boundary is an elastic sheet. A depth-averaged model in the frame of reference of the advancing air-liquid interface is used to investigate the steady and unsteady interface propagation modes via numerical simulation. In slightly collapsed channels, the steadily-propagating interface adopts a shape that is similar to the classic Saffman--Taylor finger in rigid Hele-Shaw cells. As the level of initial collapse increases the induced gradients in channel depth alter the morphology of the propagating finger and promote a variety of instabilities from tip-splitting to small-scale fingering on the curved interface, in qualitative agreement with experiments. The model has a complex solution structure with a wide range of stable and unstable, steady and time-periodic modes, many of which have similar driving pressures. We find good quantitative agreement between our model and the experimental data of Ducloué et al. (J. Fluid Mech. vol. 819, 2017, p 121) for the finger width, sheet profile and finger pressure, provided that corrections to account for the presence of liquid films on the upper and lower walls of the channel are included in the model. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Comments: 23 pages, 12 figures

MSC Class: 76T10

The life and fate of a bubble in a geometrically-perturbed Hele-Shaw channel

Authors: Antoine Gaillard, Jack S. Keeler, Grégoire Le Lay, Grégoire Lemoult, Alice B. Thompson, Andrew L. Hazel, Anne Juel

Abstract: Motivated by the desire to understand complex transient behaviour in fluid flows, we study the dynamics of an air bubble driven by the steady motion of a suspending viscous fluid within a Hele-Shaw channel with a centred depth perturbation. Using both experiments and numerical simulations of a depth-averaged model, we investigate the evolution of an initially centred bubble of prescribed volume as… ▽ More Motivated by the desire to understand complex transient behaviour in fluid flows, we study the dynamics of an air bubble driven by the steady motion of a suspending viscous fluid within a Hele-Shaw channel with a centred depth perturbation. Using both experiments and numerical simulations of a depth-averaged model, we investigate the evolution of an initially centred bubble of prescribed volume as a function of flow rate and initial shape. The experiments exhibit a rich variety of organised transient dynamics, involving bubble break up as well as aggregation and coalescence of interacting neighbouring bubbles. The long-term outcome is either a single bubble or multiple separating bubbles, positioned along the channel in order of increasing velocity. Up to moderate flow rates, the life and fate of the bubble are reproducible and can be categorised by a small number of characteristic behaviours that occur in simply-connected regions of the parameter plane. Increasing the flow rate leads to less reproducible time evolutions with increasing sensitivity to initial conditions and perturbations in the channel. Time-dependent numerical simulations that allow for break up and coalescence are found to reproduce most of the dynamical behaviour observed experimentally including enhanced sensitivity at high flow rate. An unusual feature of this system is that the set of steady and periodic solutions can change during temporal evolution because both the number of bubbles and their size distribution evolve due to break up and coalescence events. Calculation of stable and unstable solutions in the single- and two-bubble cases reveals that the transient dynamics are orchestrated by weakly-unstable solutions of the system termed edge states that can appear and disappear as the number of bubbles changes. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Comments: 39 pages, 22 figures

The influence of invariant solutions on the transient behaviour of an air bubble in a Hele-Shaw channel

Authors: J. S. Keeler, A. B. Thompson, G. Lemoult, A. Juel, A. L. Hazel

Abstract: We hypothesize that dynamical systems concepts used to study the transition to turbulence in shear flows are applicable to other transition phenomena in fluid mechanics. In this paper, we consider a finite air bubble that propagates within a Hele-Shaw channel containing a depth-perturbation. Recent experiments revealed that the bubble shape becomes more complex, quantified by an increasing number… ▽ More We hypothesize that dynamical systems concepts used to study the transition to turbulence in shear flows are applicable to other transition phenomena in fluid mechanics. In this paper, we consider a finite air bubble that propagates within a Hele-Shaw channel containing a depth-perturbation. Recent experiments revealed that the bubble shape becomes more complex, quantified by an increasing number of transient bubble tips, with increasing flow rate. Eventually the bubble changes topology, breaking into two or more distinct entities with non-trivial dynamics. We demonstrate that qualitatively similar behaviour to the experiments is exhibited by a previously established, depth-averaged mathematical model; a consequence of the model's intricate solution structure. For the bubble volumes studied, a stable asymmetric bubble exists for all flow rates of interest, whilst a second stable solution branch develops above a critical flow rate and transitions between symmetric and asymmetric shapes. The region of bistability is bounded by two Hopf bifurcations on the second branch. By developing a method for a numerical weakly nonlinear stability analysis we show that unstable periodic orbits emanate from the Hopf bifurcation at the lower flow rate and, moreover, that these orbits are edge states that influence the transient behaviour of the system. △ Less

Submitted 30 July, 2019; originally announced July 2019.

Deformation and sorting of capsules in a T-junction

Authors: E. Häner, M. Heil, A. Juel

Abstract: We study experimentally the motion and deformation of individual capsules transported by a constant volume-flux flow of low Reynolds number, through the T-junction of a channel with rectangular cross-section. We use millimetric ovalbumin-alginate capsules which we manufacture and characterise independently of the flow experiment. Centred capsules travel at constant velocity down the straight chann… ▽ More We study experimentally the motion and deformation of individual capsules transported by a constant volume-flux flow of low Reynolds number, through the T-junction of a channel with rectangular cross-section. We use millimetric ovalbumin-alginate capsules which we manufacture and characterise independently of the flow experiment. Centred capsules travel at constant velocity down the straight channel leading to the T-junction where they decelerate and expand in the spanwise direction before turning into one of the two identical daughter channels. There, non-inertial lift forces act to re-centre them and relax their shape until they reach a steady state of propagation. We find that the dynamics of fixed-size capsules within our channel geometry are governed by a capillary number Ca defined as the ratio of viscous shear forces to elastic restoring forces. We quantify the elastic forces by statically compressing the capsule to 50% of its initial diameter between parallel plates rather than by the Young's modulus of the encapsulating membrane, in order to account for different membrane thickness, pre-inflation and non-linear elastic deformation. We show that the maximum extension in the T-junction of capsules of different stiffness collapses onto a master curve in Ca. Thus, it provides a sensitive measure of the relative stiffness of capsules at constant flow rate, particularly for softer capsules. We also find that the T-junction can sort fixed-size capsules according to their stiffness because the position in the T-junction from which capsules are entrained into the daughter channel depends uniquely on Ca. We demonstrate that a T-junction can be used as a sorting device by enhancing this initial capsule separation through a diffuser. △ Less

Submitted 30 June, 2019; originally announced July 2019.

Comments: 24 pages, 15 figures

POLED displays: Robust printing of pixels

Authors: P. Kant, A. L. Hazel, M. Dowling, A. B. Thompson, A. Juel

Abstract: The fabrication of a high-quality POLED (Polymeric Organic Light Emitting Diode) display requires the deposition of identical, uniform fluid films into a large number of shallow recessed regions that form a regular array of pixels on a display backplane. We determine the protocols required to achieve continuous liquid coverage of the entire pixel area for the case where equally-spaced fluid drople… ▽ More The fabrication of a high-quality POLED (Polymeric Organic Light Emitting Diode) display requires the deposition of identical, uniform fluid films into a large number of shallow recessed regions that form a regular array of pixels on a display backplane. We determine the protocols required to achieve continuous liquid coverage of the entire pixel area for the case where equally-spaced fluid droplets are sequentially printed along a straight line within a stadium-shaped pixel, and explore how these protocols depend on the wetting properties of the pixel surface. Our investigation uses a combination of experiments and numerical modelling, based on the assumption of fluid redistribution via capillary spreading according to a Cox-Voinov law. We show that the model is able to predict quantitatively the evolution of the liquid deposited in a pixel and provides a computationally inexpensive design tool to determine efficient printing strategies that account for uncertainties arising from imperfect substrate preparation or printhead dysfunction. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: 5 pages, 4 figures

Dynamics of front propagation in a compliant channel

Authors: Callum Cuttle, Draga Pihler-Puzović, Anne Juel

Abstract: Front-propagating systems provide some of the most fundamental physical examples of interfacial instability and pattern formation. However, their nonlinear dynamics are rarely addressed. Here, we present an experimental study of air displacing a viscous fluid within a collapsed, compliant channel - a model system for pulmonary airway reopening. We show that compliance induces fingering instabiliti… ▽ More Front-propagating systems provide some of the most fundamental physical examples of interfacial instability and pattern formation. However, their nonlinear dynamics are rarely addressed. Here, we present an experimental study of air displacing a viscous fluid within a collapsed, compliant channel - a model system for pulmonary airway reopening. We show that compliance induces fingering instabilities absent in the rigid channel and we present the first experimental observations of the counter-intuitive 'pushing' behaviour previously predicted numerically, for which a reduction in air pressure results in faster flow. We find that pushing modes are unstable and moreover, that the dynamics of the air-fluid front involves a host of transient finger shapes over a significant range of experimental parameters. △ Less

Submitted 4 June, 2019; v1 submitted 20 March, 2019; originally announced March 2019.

Comments: 11 pages, 7 figures

Journal ref: J. Fluid Mech. 886 (2020) A20

Self-similar and disordered front propagation in a radial Hele-Shaw channel with time-varying cell depth

Authors: Christian Vaquero-Stainer, Matthias Heil, Anne Juel, Draga Pihler-Puzovic

Abstract: The displacement of a viscous fluid by an air bubble in the narrow gap between two parallel plates can readily drive complex interfacial pattern formation known as viscous fingering. We focus on a modified system suggested recently by [1], in which the onset of the fingering instability is delayed by introducing a time-dependent (power-law) plate separation. We perform a complete linear stability… ▽ More The displacement of a viscous fluid by an air bubble in the narrow gap between two parallel plates can readily drive complex interfacial pattern formation known as viscous fingering. We focus on a modified system suggested recently by [1], in which the onset of the fingering instability is delayed by introducing a time-dependent (power-law) plate separation. We perform a complete linear stability analysis of a depth-averaged theoretical model to show that the plate separation delays the onset of non-axisymmetric instabilities, in qualitative agreement with the predictions obtained from a simplified analysis by [1]. We then employ direct numerical simulations to show that in the parameter regime where the axisymmetrically expanding air bubble is unstable to nonaxisymmetric perturbations, the interface can evolve in a self-similar fashion such that the interface shape at a given time is simply a rescaled version of the shape at an earlier time. These novel, self-similar solutions are linearly stable but they only develop if the initially circular interface is subjected to unimodal perturbations. Conversely, the application of non-unimodal perturbations (e.g. via the superposition of multiple linearly unstable modes) leads to the development of complex, constantly evolving finger patterns similar to those that are typically observed in constant-width Hele-Shaw cells. [1] Z. Zheng, H. Kim, and H. A. Stone, Controlling viscous fingering using time-dependent strategies, Phys. Rev. Lett. 115, 174501 (2015). △ Less

Submitted 3 March, 2019; originally announced March 2019.

Comments: 12 pages, 8 figures

Bubble propagation on a rail: a concept for sorting bubbles by size

Authors: A. Franco-Gomez, A. B. Thompson, A. L. Hazel, A. Juel

Abstract: We demonstrate experimentally that the introduction of a rail, a small height constriction, within the cross-section of a rectangular channel could be used as a robust passive sorting device in two-phase fluid flows. Single air bubbles carried within silicone oil are generally transported on one side of the rail. However, for flow rates marginally larger than a critical value, a narrow band of bub… ▽ More We demonstrate experimentally that the introduction of a rail, a small height constriction, within the cross-section of a rectangular channel could be used as a robust passive sorting device in two-phase fluid flows. Single air bubbles carried within silicone oil are generally transported on one side of the rail. However, for flow rates marginally larger than a critical value, a narrow band of bubble sizes can propagate (stably) over the rail, while bubbles of other sizes segregate to the side of the rail. The width of this band of bubble sizes increases with flow rate and the size of the most stable bubble can be tuned by varying the rail width. We present a complementary theoretical analysis based on a depth-averaged theory, which is in qualitative agreement with the experiments. The theoretical study reveals that the mechanism relies on a non-trivial interaction between capillary and viscous forces that is fully dynamic, rather than being a simple modification of capillary static solutions. △ Less

Submitted 5 December, 2017; originally announced December 2017.

Comments: 17 pages, 13 figures

Journal ref: Soft Matter, 2017,13, 8684-8697

Bubble propagation in Hele-Shaw channels with centred constrictions

Authors: Andres Franco-Gomez, Alice B. Thompson, Andrew L. Hazel, Anne Juel

Abstract: We study the propagation of finite bubbles in a Hele-Shaw channel, where a centred occlusion (termed a rail) is introduced to provide a small axially-uniform depth constriction. For bubbles wide enough to span the channel, the system's behaviour is similar to that of semi-infinite fingers and a symmetric static solution is stable. Here, we focus on smaller bubbles, in which case the symmetric stat… ▽ More We study the propagation of finite bubbles in a Hele-Shaw channel, where a centred occlusion (termed a rail) is introduced to provide a small axially-uniform depth constriction. For bubbles wide enough to span the channel, the system's behaviour is similar to that of semi-infinite fingers and a symmetric static solution is stable. Here, we focus on smaller bubbles, in which case the symmetric static solution is unstable and the static bubble is displaced towards one of the deeper regions of the channel on either side of the rail. Using a combination of experiments and numerical simulations of a depth-averaged model, we show that a bubble propagating axially due to a small imposed flow rate can be stabilised in a steady symmetric mode centred on the rail through a subtle interaction between stabilising viscous forces and destabilising surface tension forces. However, for sufficiently large capillary numbers Ca, the ratio of viscous to surface tension forces, viscous forces in turn become destabilising thus returning the bubble to an off-centred propagation regime. With decreasing bubble size, the range of Ca for which steady centred propagation is stable decreases, and eventually vanishes through the coalescence of two supercritical pitchfork bifurcations. The depth-averaged model is found to accurately predict all the steady modes of propagation observed experimentally, and provides a comprehensive picture of the underlying steady bifurcation structure. However, for sufficiently large imposed flow rates, we find that initially centred bubbles do not converge onto a steady mode of propagation. Instead they transiently explore weakly unstable steady modes, an evolution which results in their break-up and eventual settling into a steady propagating state of changed topology. △ Less

Submitted 5 December, 2017; v1 submitted 7 November, 2017; originally announced November 2017.

Comments: 29 pages, 13 figures

Controlling droplet spreading with topography

Authors: Pallav Kant, Andrew L. Hazel, Mark Dowling, Alice B. Thompson, Anne Juel

Abstract: We present a novel experimental system that can be used to study the dynamics of picoliter droplet spreading over substrates with topographic variations. We concentrate on spreading of a droplet within a recessed stadium-shaped pixel, with applications to the manufacture of POLED displays, and find that the sloping side wall of the pixel can either locally enhance or hinder spreading depending on… ▽ More We present a novel experimental system that can be used to study the dynamics of picoliter droplet spreading over substrates with topographic variations. We concentrate on spreading of a droplet within a recessed stadium-shaped pixel, with applications to the manufacture of POLED displays, and find that the sloping side wall of the pixel can either locally enhance or hinder spreading depending on whether the topography gradient ahead of the contact line is positive or negative. Locally enhanced spreading occurs via the formation of thin pointed rivulets along the side walls of the pixel through a mechanism similar to capillary rise in sharp corners. We demonstrate that a thin-film model combined with an experimentally measured spreading law, which relates the speed of the contact line to the contact angle, provides excellent predictions of the evolving liquid morphologies. We also show that the spreading can be adequately described by a Cox-Voinov law for the majority of the evolution. The model does not include viscous effects and hence, the timescales for the propagation of the thin pointed rivulets are not captured. Nonetheless, this simple model can be used very effectively to predict the areas covered by the liquid and may serve as a useful design tool for systems that require precise control of liquid on substrates. △ Less

Submitted 3 January, 2017; originally announced January 2017.

Comments: 29 pages, 17 figures

Viscous fingering and dendritic growth under an elastic membrane

Authors: Lucie Ducloue, Andrew Hazel, Draga Pihler-Puzovic, Anne Juel

Abstract: We investigate the viscous fingering instability that arises when air is injected from the end of an oil-filled, compliant channel. We show that induced axial and transverse depth gradients foster novel pattern formation. Moreover, the steady propagation of the interface allows us to elucidate the nonlinear saturation of a fingering pattern first observed in a time-evolving system (Pihler-Puzovic… ▽ More We investigate the viscous fingering instability that arises when air is injected from the end of an oil-filled, compliant channel. We show that induced axial and transverse depth gradients foster novel pattern formation. Moreover, the steady propagation of the interface allows us to elucidate the nonlinear saturation of a fingering pattern first observed in a time-evolving system (Pihler-Puzovic et al. PRL 108, 074502, 2012): the wavelength is set by the viscous fingering mechanism, but the amplitude is inversely proportional to the tangent of the compliant wall's inclination angle. △ Less

Submitted 26 December, 2016; originally announced December 2016.

Reopening modes of a collapsed elasto-rigid channel

Authors: Lucie Ducloué, Andrew L. Hazel, Alice B. Thompson, Anne Juel

Abstract: Motivated by the reopening mechanics of strongly collapsed airways, we study the steady propagation of an air finger through a collapsed oil-filled channel with a single compliant wall. In a previous study using fully-compliant elastic tubes, a `pointed' air finger was found to propagate at high speed and low pressure, which may enable rapid reopening of highly collapsed airways with minimal tissu… ▽ More Motivated by the reopening mechanics of strongly collapsed airways, we study the steady propagation of an air finger through a collapsed oil-filled channel with a single compliant wall. In a previous study using fully-compliant elastic tubes, a `pointed' air finger was found to propagate at high speed and low pressure, which may enable rapid reopening of highly collapsed airways with minimal tissue damage (Heap & Juel 2008). In this paper, we identify the selection mechanism of that pointed finger, which remained unexplained, by conducting an experimental study in a rigid rectangular Hele-Shaw channel with an elastic top boundary. The constitutive behaviour of this elasto-rigid channel is broadly similar to that of an elastic tube, but unlike the tube the channel's cross-section adopts self-similar shapes from the undeformed state to the point of first near wall contact. The simplification of the vessel geometry enables the systematic investigation of the reopening dynamics in terms of initial collapse. We find that for low levels of initial collapse, a single centred symmetric finger propagates in the channel and its shape is set by the tip curvature. As the level of collapse increases, the channel cross-section develops a central region of near opposite wall contact, and the finger shape evolves smoothly towards a `flat-tipped' finger whose geometry is set by the strong depth gradient near the channel walls. We show that the flat-tipped mode of reopening is analogous to the pointed finger observed in tubes. Its propagation is sustained by the vessel's extreme cross-sectional profile at high collapse, while vessel compliance stabilises it. A simple scaling argument based on the dissipated power reveals that this reopening mode is preferred at higher propagation speeds when it becomes favourable to displace the elastic channel wall rather than the viscous fluid. △ Less

Submitted 20 May, 2016; originally announced May 2016.

Wrinkly fingers: the interaction between fluid- and solid-based instabilities in elastic-walled Hele-Shaw cells

Authors: Draga Pihler-Puzović, Anne Juel, Matthias Heil

Abstract: In this fluid dynamics video, we study a two-phase flow in an elastic Hele-Shaw cell that involves two distinct fluid- and solid-based instabilities: viscous fingering and sheet buckling. We show that the relative importance of the two instabilities is controlled by a single non-dimensional parameter, which provides a measure of the elasticity of the flexible wall. We employ numerical simulations… ▽ More In this fluid dynamics video, we study a two-phase flow in an elastic Hele-Shaw cell that involves two distinct fluid- and solid-based instabilities: viscous fingering and sheet buckling. We show that the relative importance of the two instabilities is controlled by a single non-dimensional parameter, which provides a measure of the elasticity of the flexible wall. We employ numerical simulations to show that for relatively stiff [soft] walls, the system's behaviour is dominated by viscous fingering [sheet buckling]. Strong interactions between the two instabilities arise in an intermediate regime and lead to the development of extremely complex fingering and buckling patterns. △ Less

Submitted 11 October, 2013; originally announced October 2013.

Comments: 3 pages, 2 linked videos

Squeezing through: capsule or bubble?

Authors: Geoffrey Dawson, Anne Juel

Abstract: In this fluid dynamics video, we compare the deformation of two flexible particles as they propagate through a sudden constriction of a liquid filled channel under constant-flux flow: a gas bubble, and a capsule formed by encapsulating a liquid droplet in a cross-linked polymeric membrane. Both bubble and capsule adopt highly contorted configurations as they squeeze through the constriction, exhib… ▽ More In this fluid dynamics video, we compare the deformation of two flexible particles as they propagate through a sudden constriction of a liquid filled channel under constant-flux flow: a gas bubble, and a capsule formed by encapsulating a liquid droplet in a cross-linked polymeric membrane. Both bubble and capsule adopt highly contorted configurations as they squeeze through the constriction, exhibit broadly similar features over a wide range of flow rates, and rupture for sufficiently high flow rates. However, at flow rates prior to rupture, certain features of the deformation allow bubble and capsule to be distinguished: bubbles exhibit a tip-streaming singularity associated with critical thinning of the rear of the bubble, while the capsule membrane wrinkles under large compressive stresses induced by the constriction. △ Less

Submitted 10 October, 2013; originally announced October 2013.

Comments: 2 pages, 2 linked videos

Scaling of the turbulence transition threshold in a pipe

Authors: B. Hof, A. Juel, T. Mullin

Abstract: We report the results of an experimental investigation of the transition to turbulence in a pipe over approximately an order of magnitude range in $Re$. A novel scaling law is uncovered using a systematic experimental procedure which permits contact to be made with modern theoretical thinking. The principal result we uncover is a scaling law which indicates that the amplitude of perturbation req… ▽ More We report the results of an experimental investigation of the transition to turbulence in a pipe over approximately an order of magnitude range in $Re$. A novel scaling law is uncovered using a systematic experimental procedure which permits contact to be made with modern theoretical thinking. The principal result we uncover is a scaling law which indicates that the amplitude of perturbation required to cause transition scales as $O(Re^{-1})$. △ Less

Submitted 26 June, 2003; originally announced June 2003.

Comments: 4 pages, RevTex (submitted to Phys. Rev. Lett.)

Fluctuations and Pinch-Offs Observed in Viscous Fingering

Authors: Mitchell G. Moore, Anne Juel, John M. Burgess, W. D. McCormick, Harry L. Swinney

Abstract: Our experiments on viscous (Saffman-Taylor) fingering in Hele-Shaw channels reveal several phenomena that were not observed in previous experiments. At low flow rates, growing fingers undergo width fluctuations that intermittently narrow the finger as they evolve. The magnitude of these fluctuations is proportional to Ca^{-0.64}, where Ca is the capillary number, which is proportional to the fin… ▽ More Our experiments on viscous (Saffman-Taylor) fingering in Hele-Shaw channels reveal several phenomena that were not observed in previous experiments. At low flow rates, growing fingers undergo width fluctuations that intermittently narrow the finger as they evolve. The magnitude of these fluctuations is proportional to Ca^{-0.64}, where Ca is the capillary number, which is proportional to the finger velocity. This relation holds for all aspect ratios studied up to the onset of tip instabilities. At higher flow rates, finger pinch-off and reconnection events are observed. These events appear to be caused by an interaction between the actively growing finger and suppressed fingers at the back of the channel. Both the fluctuation and pinch-off phenomena are robust but not explained by current theory. △ Less

Submitted 14 October, 2002; originally announced October 2002.

Comments: 6 pages, 3 figures; to appear in Proceedings of the Seventh Experimental Chaos Conference

Fluctuations in viscous fingering

Authors: Mitchell G. Moore, Anne Juel, John M. Burgess, W. D. McCormick, Harry L. Swinney

Abstract: Our experiments on viscous (Saffman-Taylor) fingering in Hele-Shaw channels reveal finger width fluctuations that were not observed in previous experiments, which had lower aspect ratios and higher capillary numbers Ca. These fluctuations intermittently narrow the finger from its expected width. The magnitude of these fluctuations is described by a power law, Ca^{-0.64}, which holds for all aspe… ▽ More Our experiments on viscous (Saffman-Taylor) fingering in Hele-Shaw channels reveal finger width fluctuations that were not observed in previous experiments, which had lower aspect ratios and higher capillary numbers Ca. These fluctuations intermittently narrow the finger from its expected width. The magnitude of these fluctuations is described by a power law, Ca^{-0.64}, which holds for all aspect ratios studied up to the onset of tip instabilities. Further, for large aspect ratios, the mean finger width exhibits a maximum as Ca is decreased instead of the predicted monotonic increase. △ Less

Submitted 16 October, 2001; v1 submitted 27 June, 2001; originally announced June 2001.

Comments: Revised introduction, smoothed transitions in paper body, and added a few additional minor results. (Figures unchanged.) 4 pages, 3 figures. Submitted to PRE Rapid

Journal ref: Phys Rev E 65, 030601 (2002).

Surface tension-driven convection patterns in two liquid layers

Authors: Anne Juel, John M. Burgess, W. D. McCormick, J. B. Swift, Harry L. Swinney

Abstract: Two superposed liquid layers display a variety of convective phenomena that are inaccessible in the traditional system where the upper layer is a gas. We consider several pairs of immiscible liquids. Once the liquids have been selected, the applied temperature difference and the depths of the layers are the only independent control parameters. Using a perfluorinated hydrocarbon and silicone oil… ▽ More Two superposed liquid layers display a variety of convective phenomena that are inaccessible in the traditional system where the upper layer is a gas. We consider several pairs of immiscible liquids. Once the liquids have been selected, the applied temperature difference and the depths of the layers are the only independent control parameters. Using a perfluorinated hydrocarbon and silicone oil system, we have made the first experimental observation of convection with the top plate hotter than the lower plate. Since the system is stably stratified, this convective flow is solely due to thermocapillary forces. We also have found oscillatory convection at onset in an acetonitrile and n-hexane system heated from below. △ Less

Submitted 15 November, 1999; originally announced November 1999.

Comments: 24 pages, 17 figures, submitted for the the special issue of Physica D to be entitled "Bifurcations, Patterns and Symmetry: selected papers dedicated to the memory of John David Crawford"