Showing 1–50 of 169 results for author: Joshi, Y

Nano-silica based Aqueous Colloidal Gels as Eco-friendly Thixotropic Lubricant

Authors: Arun Kumar, Vivek Kumar, Yogesh M. Joshi, Manjesh K. Singh

Abstract: The environmental risks posed by traditional oil and grease-based lubricants can be significantly mitigated by adopting water-based alternatives engineered with superior rheological performance. In this work, we present a fundamentally new and environmentally sustainable aqueous thixotropic colloidal gel of silica nanoparticles formed in the presence of NaCl. We conducted a systematic and detailed… ▽ More The environmental risks posed by traditional oil and grease-based lubricants can be significantly mitigated by adopting water-based alternatives engineered with superior rheological performance. In this work, we present a fundamentally new and environmentally sustainable aqueous thixotropic colloidal gel of silica nanoparticles formed in the presence of NaCl. We conducted a systematic and detailed investigation of their rheological and tribological characteristics. The tribological performance was evaluated against dry and water-lubricated conditions for steel-steel interface. Our experiments demonstrate that the tribological performance of the formulated nanoparticle gel can be optimized by tuning its rheological properties. A combination of super-low friction and negligible wear was observed. The friction coefficient reduced by up to 97.46% (from 0.63 to 0.016) compared to dry sliding, and by 97.04% (from 0.541 to 0.016) compared to water lubrication. Similarly, the specific wear rate decreased by up to 99.62% and 96.10% under dry conditions and water lubrication respectively. This performance is attributed to a thixotropic, chemically robust gel formed via van der Waals interactions between silica flocs, enabling self-repairing properties, continuous tribo-film formation, and a nano-bearing effect from silica nanoparticles. These attributes enable the gel to maintain and regain its structure during periods of non-shear while also forming a thin film with sufficiently low viscosity to slip into the interfacial contact zone and continuously replenish it with lubricant. △ Less

Submitted 19 June, 2025; originally announced June 2025.

Comments: 10 figures, supporting information

Quantum secret sharing in a triangular superconducting quantum network

Authors: Haoxiong Yan, Allen Zang, Joel Grebel, Xuntao Wu, Ming-Han Chou, Gustav Andersson, Christopher R. Conner, Yash J. Joshi, Shiheng Li, Jacob M. Miller, Rhys G. Povey, Hong Qiao, Eric Chitambar, Andrew N. Cleland

Abstract: We present a three-node quantum communication testbed with a triangular topology, each side of the triangle formed by a 1.3-meter-long transmission line. We demonstrate state transfer and entanglement generation between any two nodes, generate genuine multipartite entangled GHZ states, and implement quantum secret sharing (QSS) of classical information. Our experiments show that the QSS protocol c… ▽ More We present a three-node quantum communication testbed with a triangular topology, each side of the triangle formed by a 1.3-meter-long transmission line. We demonstrate state transfer and entanglement generation between any two nodes, generate genuine multipartite entangled GHZ states, and implement quantum secret sharing (QSS) of classical information. Our experiments show that the QSS protocol can effectively detect eavesdropping, ensuring the secure sharing of secrets. This device forms a testbed for robust and secure quantum networking, enabling testing of more advanced quantum communication protocols. △ Less

Submitted 12 June, 2025; originally announced June 2025.

Mapping the reddening plane in the Galactic disk through interstellar extinction of open clusters

Authors: Yogesh C. Joshi

Abstract: As thousands of new open clusters in the Galaxy have recently been reported with reddening or extinction information, we map the distribution and properties of the Galaxy's interstellar material in the Galactic disk as traced by these open clusters. By analyzing the distribution of interstellar extinction for 6215 open clusters located at low Galactic latitude b <= 6 deg, corresponding to the thin… ▽ More As thousands of new open clusters in the Galaxy have recently been reported with reddening or extinction information, we map the distribution and properties of the Galaxy's interstellar material in the Galactic disk as traced by these open clusters. By analyzing the distribution of interstellar extinction for 6215 open clusters located at low Galactic latitude b <= 6 deg, corresponding to the thin Galactic disk, we identify a reddening plane characterized by a dust layer whose thickness varies with Galactic longitude. By splitting the open clusters sample into several sub-regions of Galactic longitude, we observe that the reddening plane is not perfectly aligned with the formal Galactic plane, but instead varies sinusoidally around the Galactic mid-plane. The maximum and minimum interstellar absorption occur at approximately 42 deg and 222 deg, respectively, along the Galactic longitude. Our analysis reveals a noticeable north-south asymmetry in the distribution of interstellar absorption, with a higher proportion of interstellar material below the Galactic plane. We also find that the Sun is located 15.7 +/- 7.3 pc above the reddening plane. The scale height of the open clusters from the reddening plane is estimated to be z_h = 87.3 +/- 1.8 pc. The mean thickness of the absorbing material in the reddening plane, which represents the average extent of the dust layer responsible for interstellar extinction, is found to be about 201 +/- 20 pc. Our findings provide insights into the distribution of interstellar dust, its relationship with the Galactic thin disk, and its implications for the Galactic structure. △ Less

Submitted 4 June, 2025; originally announced June 2025.

Comments: published in New Astronomy, 14 pages, 9 figures, 1 table

Mitigating cosmic ray-like correlated events with a modular quantum processor

Authors: Xuntao Wu, Yash J. Joshi, Haoxiong Yan, Gustav Andersson, Alexander Anferov, Christopher R. Conner, Bayan Karimi, Amber M. King, Shiheng Li, Howard L. Malc, Jacob M. Miller, Harsh Mishra, Hong Qiao, Minseok Ryu, Siyuan Xing, Jian Shi, Andrew N. Cleland

Abstract: Quantum processors based on superconducting qubits are being scaled to larger qubit numbers, enabling the implementation of small-scale quantum error correction codes. However, catastrophic chip-scale correlated errors have been observed in these processors, attributed to e.g. cosmic ray impacts, which challenge conventional error-correction codes such as the surface code. These events are charact… ▽ More Quantum processors based on superconducting qubits are being scaled to larger qubit numbers, enabling the implementation of small-scale quantum error correction codes. However, catastrophic chip-scale correlated errors have been observed in these processors, attributed to e.g. cosmic ray impacts, which challenge conventional error-correction codes such as the surface code. These events are characterized by a temporary but pronounced suppression of the qubit energy relaxation times. Here, we explore the potential for modular quantum computing architectures to mitigate such correlated energy decay events. We measure cosmic ray-like events in a quantum processor comprising a motherboard and two flip-chip bonded daughterboard modules, each module containing two superconducting qubits. We monitor the appearance of correlated qubit decay events within a single module and across the physically separated modules. We find that while decay events within one module are strongly correlated (over $85\%$), events in separate modules only display $\sim 2\%$ correlations. We also report coincident decay events in the motherboard and in either of the two daughterboard modules, providing further insight into the nature of these decay events. These results suggest that modular architectures, combined with bespoke error correction codes, offer a promising approach for protecting future quantum processors from chip-scale correlated errors. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: 13 pages, 11 figures

Exploring Contact Binaries: Observational Analysis of four W Uma Binaries Using Photometry and Spectroscopy

Authors: Alaxender Panchal, Yogesh Chandra Joshi, Vishal Joshi, Abhijit Chakraborty

Abstract: We present the multi-band photometric and low-resolution spectroscopic analysis of four W Ursae Majoris eclipsing binaries (EWs) - J080510.1+141528 (hereinafter as J0805a), J080516.3+143138 (hereinafter as J0805b), J143358.7+053953 (hereinafter as J1433), and J143458.4+054143 (hereinafter as J1434). The multi-band ground based photometric data are collected using the 1.3-m Devasthal Fast Optical T… ▽ More We present the multi-band photometric and low-resolution spectroscopic analysis of four W Ursae Majoris eclipsing binaries (EWs) - J080510.1+141528 (hereinafter as J0805a), J080516.3+143138 (hereinafter as J0805b), J143358.7+053953 (hereinafter as J1433), and J143458.4+054143 (hereinafter as J1434). The multi-band ground based photometric data are collected using the 1.3-m Devasthal Fast Optical Telescope (DFOT) while we also make use of TESS photometric observations. The spectroscopic analysis is based on the low-resolution observations by 4-m Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). The ephemeris of these systems are updated using the photometric data from TESS and other photometric surveys. The system J0805b shows a secular change in the orbital period with a period change rate of 4.2 ($\pm$ 0.1) $\times10^{-7}$ days per year while the orbital period change rate for J1433 is calculated as -1.1 ($\pm$ 0.1) $\times10^{-6}$ days per year. The mass-transfer rate for J0805b is found to be dM$_{1}$/dt = -1.56($\pm$0.07) $\times 10^{-6}$ M$_{\odot}$/year and dM$_{1}$/dt = -7.95($\pm$0.87) $\times 10^{-7}$ M$_{\odot}$/year for J1433. All the systems have inclination > 79$^{\circ}$ except J1433 which has inclination of 72.8$^{\circ}$. The mass-ratios (less massive to more massive component) for these targets are < 0.5. All the system except J0805b are A-subtype contact binaries. The absolute parameters of the systems are determined using GAIA DR3 parallax and reddening information. The LAMOST spectra are analyzed using spectral subtraction technique. A small excess emission is detected for J1433 in H$_α$ and H$_β$ region. The systems are plotted on Hertzsprung-Russell (HR) diagram and compared with previously studied systems. The mass-ratio vs radius-ratio relation is also investigated for these systems. △ Less

Submitted 5 May, 2025; originally announced May 2025.

Comments: Accepted for publication in ApJ

Shear Stress Build-up Under Constant Strain Conditions in Soft Glassy Materials

Authors: Vivek Kumar, Gareth H McKinley, Yogesh M Joshi

Abstract: In this work, we investigate the transient rheological behavior of two soft glassy materials: a clay dispersion and a silica gel, emphasizing their unconventional shear stress build-up behavior under conditions of constant imposed strain. For both materials, the elastic modulus and static yield stress undergo time-dependent evolution or aging. In addition, following an intense period of pre-sheari… ▽ More In this work, we investigate the transient rheological behavior of two soft glassy materials: a clay dispersion and a silica gel, emphasizing their unconventional shear stress build-up behavior under conditions of constant imposed strain. For both materials, the elastic modulus and static yield stress undergo time-dependent evolution or aging. In addition, following an intense period of pre-shearing (i.e. shear-melting or destructuration), the material relaxation time is observed to show a stronger than linear dependence on the sample age, suggestive of hyper-aging dynamics. We show that these features are consistent with non-monotonic steady-state shear stress/shear rate flow curves characterized by a local stress minimum. When a steady shear flow is suddenly ceased, and the total imposed sample strain is held constant, both materials show an initial relaxation of the shear stress followed by a period of shear stress buildup, resulting in a local minimum in the evolution of shear stress with time. For the clay dispersion, the intensity of these effects increases with higher pre-shear rates, whereas for the silica gel, the effects are largely independent of the pre-shear rate. We also propose a simple time-dependent linear Maxwell model, which qualitatively predicts the experimentally observed trends in which the shear stress build-up is directly related to a monotonic increase in the elastic modulus, giving keen insight into this peculiar phenomenon. △ Less

Submitted 1 April, 2025; originally announced April 2025.

Comments: 40 pages, 18 figures

Demonstration of a new CLLBC-based gamma- and neutron-sensitive free-moving omnidirectional imaging detector

Authors: Jayson R. Vavrek, Ryan Pavlovsky, Victor Negut, Daniel Hellfeld, Tenzing H. Y. Joshi, Brian J. Quiter, Joshua W. Cates

Abstract: We have developed a CLLBC-based gamma- and neutron-sensitive multi-channel omnidirectional imaging detector, suitable for handheld or vehicle-borne operation and capable of quantitative radiation mapping in 3D. The system comprises 62 CLLBC modules in an active-masked configuration, and is coupled to a Localization and Mapping Platform (LAMP) suite of contextual sensors that provides a 3D map of t… ▽ More We have developed a CLLBC-based gamma- and neutron-sensitive multi-channel omnidirectional imaging detector, suitable for handheld or vehicle-borne operation and capable of quantitative radiation mapping in 3D. The system comprises 62 CLLBC modules in an active-masked configuration, and is coupled to a Localization and Mapping Platform (LAMP) suite of contextual sensors that provides a 3D map of the environment. The contextual and radiation data is combined using Scene Data Fusion (SDF) methods to better inform the reconstruction of the source radiation distribution from variations in the measured counts as the detector moves throughout the 3D environment. Here, we first present benchtop-scale characterization studies for both the neutron and gamma ray channels. In tandem, we present Geant4 simulations of both the single-crystal and full-system detection efficiencies over the omnidirectional field of view, and compare against validation measurements. We then demonstrate the imager's capabilities in a variety of different scenarios, ranging from free-moving handheld simultaneous measurements of Cs-137 and Cf-252 to more challenging motion-constrained or static measurement scenarios. In several of these scenarios we also demonstrate how the full omnidirectional multi-crystal responses markedly improve the reconstruction quality. The imager is therefore a promising system for conducting simultaneous gamma and neutron radiation measurements in applications such as homeland security, contamination mapping, and nuclear decommissioning. △ Less

Submitted 12 March, 2025; originally announced March 2025.

Comments: 30 pages, 17 figures, 2 tables

Acoustic phonon phase gates with number-resolving phonon detection

Authors: Hong Qiao, Zhaoyou Wang, Gustav Andersson, Alexander Anferov, Christopher R. Conner, Yash J. Joshi, Shiheng Li, Jacob M. Miller, Xuntao Wu, Haoxiong Yan, Liang Jiang, Andrew N. Cleland

Abstract: Linear optical quantum computing (LOQC) provides a compelling approach to quantum information processing, with a short list of physical requirements; however, experimental implementations have faced significant challenges. Itinerant phonons in quantum acoustics, combined with superconducting qubits, offer a compelling alternative to the quantum optics approach. Here we demonstrate key advances in… ▽ More Linear optical quantum computing (LOQC) provides a compelling approach to quantum information processing, with a short list of physical requirements; however, experimental implementations have faced significant challenges. Itinerant phonons in quantum acoustics, combined with superconducting qubits, offer a compelling alternative to the quantum optics approach. Here we demonstrate key advances in the ability to manipulate and measure acoustic phonon quantum states: First, we demonstrate deterministic phase control of itinerant one- and two-phonon qubit states, measured using an acoustic Mach-Zehnder interferometer. We implement phonon phase control using the frequency-dependent scattering of phonon states from a superconducting transmon qubit. The acoustic interferometer used to measure the resulting phonon phase achieves a noise-floor-limited Hong-Ou-Mandel (HOM) interference visibility of 98.1%, representing a significant improvement over our previous demonstration. Additionally, we propose and implement a multi-phonon detection scheme that enables coherent conversion between itinerant one- and two-phonon Fock states and transmon qutrit states, transforming for example the Hong-Ou-Mandel two-phonon entangled output state $|02\rangle - |20\rangle$ into the entangled state of two transmons. The tight integration of quantum acoustics with superconducting circuits native to our implementation promises further advances, including deterministic phonon quantum gates with direct applications to quantum computing. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Investigating Pulsating Variables and Eclipsing Binaries in NGC 2126 using Ground and Space-based Photometry, Astrometry, Spectroscopy and Modeling

Authors: Athul Dileep, Santosh Joshi, Sneh Lata, Patricia Lampens, Peter De Cat, Sebastian Zúñiga-Fernández, David Mkrtichian, Pramod Kumar S, Mrinmoy Sarkar, Alaxender Panchal, Yogesh C. Joshi, Rishi C., Neelam Panwar, Arjav Jain, Neeraj Rathore

Abstract: Pulsating variables are prevalent in the classical δ Scuti instability strip of intermediate-age open star clusters. The cluster membership of these stars facilitates a comparative analysis of their evolution in analogous environments. In this study, we integrate ground-based observations, TESS Full Frame Images (FFIs), and Gaia DR3 data to investigate variable stars in the intermediate-age open s… ▽ More Pulsating variables are prevalent in the classical δ Scuti instability strip of intermediate-age open star clusters. The cluster membership of these stars facilitates a comparative analysis of their evolution in analogous environments. In this study, we integrate ground-based observations, TESS Full Frame Images (FFIs), and Gaia DR3 data to investigate variable stars in the intermediate-age open star cluster NGC 2126. We performed ground-based time-series observations of NGC 2126 to identify variable stars within its vicinity. Next, we determined the membership of these stars using parallax and the proper motions from Gaia DR3 archive. Then, we searched the TESS Full Frame Images (FFIs) for counterparts to the variables identified above and performed their frequency analysis and classification. Finally, we modeled the light curves (LCs) of detected eclipsing binaries (EBs), including V551 Aur, which has a pulsating component. We found 25 members and 85 field variable stars. In TESS FFIs, we found LCs for 11 known variables and a new rotational variable. We determined that the pulsating EB V551 Aur is a member of the cluster. The low- and medium-resolution spectra revealed the line profile variation and the basic parameters for the star, respectively. Simultaneous modeling of the eclipses and the embedded pulsations resulted in improved orbital parameters for the binary system. We also report the determination of orbital parameters for the previously uncharacterized EB system UCAC4 700-043174. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Comments: 27 pages, 37 figures, accepted for publication in MNRAS

Simulations of Sparse Static Detector Networks for City-Scale Radiological/Nuclear Detection

Authors: E. Rofors, N. Abgrall, M. S. Bandstra, R. J. Cooper, D. Hellfeld, T. H. Y. Joshi, V. Negut, B. J. Quiter, M. Salathe

Abstract: Sparse static detector networks in urban environments can be used in efforts to detect illicit radioactive sources, such as stolen nuclear material or radioactive "dirty bombs". We use detailed simulations to evaluate multiple configurations of detector networks and their ability to detect sources moving through a $6\times6$ km$^2$ area of downtown Chicago. A detector network's probability of dete… ▽ More Sparse static detector networks in urban environments can be used in efforts to detect illicit radioactive sources, such as stolen nuclear material or radioactive "dirty bombs". We use detailed simulations to evaluate multiple configurations of detector networks and their ability to detect sources moving through a $6\times6$ km$^2$ area of downtown Chicago. A detector network's probability of detecting a source increases with detector density but can also be increased with strategic node placement. We show that the ability to fuse correlated data from a source-carrying vehicle passing by multiple detectors can significantly contribute to the overall detection probability. In this paper we distinguish static sensor deployments operated as networks able to correlate signals between sensors, from deployments operated as arrays where each sensor is operated individually. In particular, we show that additional visual attributes of source-carrying vehicles, such as vehicle color and make, can greatly improve the ability of a detector network to detect illicit sources. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Surrogate distributed radiological sources III: quantitative distributed source reconstructions

Authors: Jayson R. Vavrek, Jaewon Lee, Marco Salathe, Mark S. Bandstra, Daniel Hellfeld, Brian J. Quiter, Tenzing H. Y. Joshi

Abstract: In this third part of a multi-paper series, we present quantitative image reconstruction results from aerial measurements of eight different surrogate distributed gamma-ray sources on flat terrain. We show that our quantitative imaging methods can accurately reconstruct the expected shapes, and, after appropriate calibration, the absolute activity of the distributed sources. We conduct several stu… ▽ More In this third part of a multi-paper series, we present quantitative image reconstruction results from aerial measurements of eight different surrogate distributed gamma-ray sources on flat terrain. We show that our quantitative imaging methods can accurately reconstruct the expected shapes, and, after appropriate calibration, the absolute activity of the distributed sources. We conduct several studies of imaging performance versus various measurement and reconstruction parameters, including detector altitude and raster pass spacing, data and modeling fidelity, and regularization type and strength. The imaging quality performance is quantified using various quantitative image quality metrics. Our results confirm the utility of point source arrays as surrogates for truly distributed radiological sources, advancing the quantitative capabilities of Scene Data Fusion gamma-ray imaging methods. △ Less

Submitted 3 December, 2024; originally announced December 2024.

Comments: 13 pages, 14 figures

Deterministic multi-phonon entanglement between two mechanical resonators on separate substrates

Authors: Ming-Han Chou, Hong Qiao, Haoxiong Yan, Gustav Andersson, Christopher R. Conner, Joel Grebel, Yash J. Joshi, Jacob M. Miller, Rhys G. Povey, Xuntao Wu, Andrew N. Cleland

Abstract: Mechanical systems have emerged as a compelling platform for applications in quantum information, leveraging recent advances in the control of phonons, the quanta of mechanical vibrations. Several experiments have demonstrated control and measurement of phonon states in mechanical resonators integrated with superconducting qubits, and while entanglement of two mechanical resonators has been demons… ▽ More Mechanical systems have emerged as a compelling platform for applications in quantum information, leveraging recent advances in the control of phonons, the quanta of mechanical vibrations. Several experiments have demonstrated control and measurement of phonon states in mechanical resonators integrated with superconducting qubits, and while entanglement of two mechanical resonators has been demonstrated in some approaches, a full exploitation of the bosonic nature of phonons, such as multi-phonon entanglement, remains a challenge. Here, we describe a modular platform capable of rapid multi-phonon entanglement generation and subsequent tomographic analysis, using two surface acoustic wave resonators on separate substrates, each connected to a superconducting qubit. We generate a mechanical Bell state between the two mechanical resonators, achieving a fidelity of $\mathcal{F} = 0.872\pm 0.002$, and further demonstrate the creation of a multi-phonon entangled state (N=2 N00N state), shared between the two resonators, with fidelity $\mathcal{F} = 0.748\pm 0.008$. This approach promises the generation and manipulation of more complex phonon states, with potential future applications in bosonic quantum computing in mechanical systems. The compactness, modularity, and scalability of our platform further promises advances in both fundamental science and advanced quantum protocols, including quantum random access memory and quantum error correction. △ Less

Submitted 24 November, 2024; originally announced November 2024.

Comments: 25 pages, 9 figures

Low-resolution Transit Spectroscopy of Three Hot Jupiters Using the 2m Himalayan Chandra Telescope

Authors: Athira Unni, Thirupathi Sivarani, Jayesh Goyal, Yogesh C. Joshi, Apurva V. Oza, Ravinder K Banyal

Abstract: Here, we present the low-resolution transmission spectroscopy of three giant planets using the Himalayan Faint Object Spectrograph Camera (HFOSC) on the 2m Himalayan Chandra Telescope (HCT) in Hanle, India. It is the first application of transmission spectroscopy with HCT. This study presents results from a single transit, each for three planets: HAT-P-1b, KELT- 18b and WASP-127b. The selection of… ▽ More Here, we present the low-resolution transmission spectroscopy of three giant planets using the Himalayan Faint Object Spectrograph Camera (HFOSC) on the 2m Himalayan Chandra Telescope (HCT) in Hanle, India. It is the first application of transmission spectroscopy with HCT. This study presents results from a single transit, each for three planets: HAT-P-1b, KELT- 18b and WASP-127b. The selection of suitable reference stars assisted in accurately tracking slit losses for the long cadence observations that are needed to achieve the required Signal to Noise Ratio (SNR). We employ the Common Mode Correction (CMC) technique, utilizing a white light transit curve to minimize time dependent systematic errors. The observed spectra for WASP-127b and HAT-P-1b agree with previous low-resolution transit spectroscopic observations using other observing facilities. We confirm the presence of Rayleigh scattering in the atmosphere of WASP-127b. In addition, we provide the first low-resolution transmission spectrum for KELT-18b. Modeling the exoplanet atmosphere with HFOSC and available IR observations from HST and SPITZER for WASP-127b and HAT-P-1b shows that HFOSC can be an alternative optical instrument to use in conjunction with IR observations to constrain the atmospheric parameters better. △ Less

Submitted 24 October, 2024; originally announced October 2024.

Transit Timing Variation of K2-237b: Hints Toward Planet Disk Migration

Authors: Fan Yang, Richard J. Long, Eamonn Kerins, Supachai Awiphan, Su-Su Shan, Bo Zhang, Yogesh C. Joshi, Napaporn A-thano, Ing-Guey Jiang, Akshay Priyadarshi, Ji-Feng Liu

Abstract: Hot Jupiters should initially form at considerable distances from host stars and subsequently migrate towards inner regions, supported directly by transit timing variation (TTV). We report the TTV of K2-237b, using reproduced timings fitted from \textit{Kepler} K2 and \textit{TESS} data. The timings span from 2016 to 2021, leading to an observational baseline of 5 years. The timing evolution prese… ▽ More Hot Jupiters should initially form at considerable distances from host stars and subsequently migrate towards inner regions, supported directly by transit timing variation (TTV). We report the TTV of K2-237b, using reproduced timings fitted from \textit{Kepler} K2 and \textit{TESS} data. The timings span from 2016 to 2021, leading to an observational baseline of 5 years. The timing evolution presents a significant bias to a constant period scenario. The model evidence is evaluated utilizing the Bayesian Information Criterion (BIC), which favours the scenario of period decay with a $Δ$BIC of 14.1. The detected TTV induces a period decay rate ($\dot{P}$) of -1.14$\pm$0.28$\times$10$^{-8}$ days per day ($-$0.36 s/year). Fitting the spectral energy distribution, we find infrared excess at the significance level of 1.5 $σ$ for WISE W1 and W2 bands, and 2 $σ$ level for W3 and W4 bands. This potentially reveals the existence of a stellar disk, consisting of hot dust at 800$\pm$300 K, showing a $L_{dust}/L_{\ast}$ of 5$\pm$3$\times$10$^{-3}$. We obtain a stellar age of 1.0$^{+1.4}_{-0.7}$$\times$10$^{9}$ yr from isochrone fitting. The properties of K2-237b potentially serve as a direct observational support to the planet disk migration though more observation are needed. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Comments: 5 pages, Accepted for publication in MNRAS Letters

Modular quantum processor with an all-to-all reconfigurable router

Authors: Xuntao Wu, Haoxiong Yan, Gustav Andersson, Alexander Anferov, Ming-Han Chou, Christopher R. Conner, Joel Grebel, Yash J. Joshi, Shiheng Li, Jacob M. Miller, Rhys G. Povey, Hong Qiao, Andrew N. Cleland

Abstract: Superconducting qubits provide a promising approach to large-scale fault-tolerant quantum computing. However, qubit connectivity on a planar surface is typically restricted to only a few neighboring qubits. Achieving longer-range and more flexible connectivity, which is particularly appealing in light of recent developments in error-correcting codes, however usually involves complex multi-layer pa… ▽ More Superconducting qubits provide a promising approach to large-scale fault-tolerant quantum computing. However, qubit connectivity on a planar surface is typically restricted to only a few neighboring qubits. Achieving longer-range and more flexible connectivity, which is particularly appealing in light of recent developments in error-correcting codes, however usually involves complex multi-layer packaging and external cabling, which is resource-intensive and can impose fidelity limitations. Here, we propose and realize a high-speed on-chip quantum processor that supports reconfigurable all-to-all coupling with a large on-off ratio. We implement the design in a four-node quantum processor, built with a modular design comprising a wiring substrate coupled to two separate qubit-bearing substrates, each including two single-qubit nodes. We use this device to demonstrate reconfigurable controlled-Z gates across all qubit pairs, with a benchmarked average fidelity of $96.00\%\pm0.08\%$ and best fidelity of $97.14\%\pm0.07\%$, limited mainly by dephasing in the qubits. We also generate multi-qubit entanglement, distributed across the separate modules, demonstrating GHZ-3 and GHZ-4 states with fidelities of $88.15\%\pm0.24\%$ and $75.18\%\pm0.11\%$, respectively. This approach promises efficient scaling to larger-scale quantum circuits, and offers a pathway for implementing quantum algorithms and error correction schemes that benefit from enhanced qubit connectivity. △ Less

Submitted 16 September, 2024; v1 submitted 29 July, 2024; originally announced July 2024.

Journal ref: Physical Review X 14, 041030 (2024)

Origin of extended Main Sequence Turn Off in open cluster NGC 2355

Authors: Jayanand Maurya, M. R. Samal, Louis Amard, Yu Zhang, Hubiao Niu, Sang Chul Kim, Y. C. Joshi, B. Kumar

Abstract: The presence of extended Main Sequence Turn-Off (eMSTO) in the open clusters has been attributed to various factors, such as spread in rotation rates, binary stars, and dust-like extinction from stellar excretion discs. We present a comprehensive analysis of the eMSTO in the open cluster NGC 2355. Using spectra from the Gaia-ESO archives, we find that the stars in the red part of the eMSTO have a… ▽ More The presence of extended Main Sequence Turn-Off (eMSTO) in the open clusters has been attributed to various factors, such as spread in rotation rates, binary stars, and dust-like extinction from stellar excretion discs. We present a comprehensive analysis of the eMSTO in the open cluster NGC 2355. Using spectra from the Gaia-ESO archives, we find that the stars in the red part of the eMSTO have a higher mean v sin i value of 135.3$\pm$4.6 km s$^{-1}$ compared to the stars in the blue part that have an average v sin i equal to 81.3$\pm$5.6 km s$^{-1}$. This suggests that the eMSTO in NGC 2355 is possibly caused by the spread in rotation rates of stars. We do not find any substantial evidence of the dust-like extinction from the eMSTO stars using ultraviolet data from the Swift survey. The estimated synchronization time for low mass ratio close binaries in the blue part of the eMSTO suggests that they would be mostly slow-rotating if present. However, the stars in the blue part of the eMSTO are preferentially located in the outer region of the cluster indicating that they may lack low mass ratio close binaries. The spread in rotation rates of eMSTO stars in NGC 2355 is most likely caused by the star-disc interaction mechanism. The stars in the lower main sequence beyond the eMSTO region of NGC 2355 are slow-rotating (mean v sin i = 26.5$\pm$1.3 km s$^{-1}$) possibly due to the magnetic braking of their rotations. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: 11 pages, 12 figures, accepted for publication in MNRAS

On the Metallicity Gradients in the Galactic Disk using Open Clusters

Authors: Yogesh C. Joshi, Deepak, Sagar Malhotra

Abstract: We study the metallicity distribution and evolution in the Galactic disk based on the largest sample of open star clusters in the Galaxy. From the catalogue of 1879 open clusters in the range of Galactocentric distance (R_GC) from 4 to 20 kpc, we investigate the variation of metallicity in the Galactic disk as functions of R_GC, vertical distance (Z), and ages of the clusters. In the direction per… ▽ More We study the metallicity distribution and evolution in the Galactic disk based on the largest sample of open star clusters in the Galaxy. From the catalogue of 1879 open clusters in the range of Galactocentric distance (R_GC) from 4 to 20 kpc, we investigate the variation of metallicity in the Galactic disk as functions of R_GC, vertical distance (Z), and ages of the clusters. In the direction perpendicular to the Galactic plane, variation in metallicity is found to follow a stepped linear relation. We estimate a vertical metallicity gradient d[Fe/H]/dZ of -0.545+/-0.046 dex/kpc for |Z| < 0.487 kpc, and -0.075+/-0.093 dex/kpc for 0.487 < |Z| < 1.8 kpc. On average, metallicity variations above and below the Galactic plane are found to change at similar rates. The change in metallicity in the radial direction is also found to follow a two-function linear relation. We obtain a radial metallicity gradient d[Fe/H]/d[R_GC] of -0.070+/-0.002 dex/kpc for 4.0<R_GC<12.8 kpc, and -0.005+/-0.018 dex/kpc for 12.8< R_GC < 20.5 kpc which clearly shows a strong variation in the metallicity gradient when moving from the inner to the outer Galactic disk. Age-metallicity relation (AMR) is found to follow a steeper negative slope of -0.031+/-0.006 dex/Gyr for clusters older than 240 Myr, however, there is some hint of positive metallicity age gradient for younger clusters. △ Less

Submitted 28 March, 2024; v1 submitted 14 March, 2024; originally announced March 2024.

Comments: Accepted for publication in Frontiers in Astronomy and Space Sciences, 28 pages, 9 figures, 4 tables

Harmonic Balance for Differential Constitutive Models under Oscillatory Shear

Authors: Shivangi Mittal, Yogesh M. Joshi, Sachin Shanbhag

Abstract: Harmonic balance (HB) is a popular Fourier-Galerkin method used in the analysis of nonlinear vibration problems where dynamical systems are subjected to periodic forcing. We adapt HB to find the periodic steady-state response of nonlinear differential constitutive models subjected to large amplitude oscillatory shear flow. By incorporating the alternating-frequency-time scheme into HB, we develop… ▽ More Harmonic balance (HB) is a popular Fourier-Galerkin method used in the analysis of nonlinear vibration problems where dynamical systems are subjected to periodic forcing. We adapt HB to find the periodic steady-state response of nonlinear differential constitutive models subjected to large amplitude oscillatory shear flow. By incorporating the alternating-frequency-time scheme into HB, we develop a computer program called FLASH (acronym for Fast Large Amplitude Simulation using Harmonic balance), which makes it convenient to apply HB to any differential constitutive model. We validate FLASH by considering two representative constitutive models, viz., the exponential Phan-Thien Tanner model and a nonlinear temporary network model. In terms of accuracy and speed, FLASH outperforms the conventional approach of solving initial value problems by numerical integration via time-stepping methods often by several orders of magnitude. We discuss how FLASH can be conveniently extended for other nonlinear constitutive models, which opens up potential applications in model calibration and selection, and stability analysis. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 41 pages, 9 figures

Journal ref: Physics of Fluids 36, 053104 (2024)

Aqueous Laponite Dispersions are Attractive Gels, Not Repulsive Wigner Glasses: A Critical Commentary

Authors: Yogesh M Joshi, Shrajesh Patel, Khushboo Suman

Abstract: An aqueous dispersion of Laponite has been studied in the literature for over the past three decades. Typically, the aqueous dispersion of Laponite undergoes incessant evolution of its microstructure, wherein its elastic modulus and the mean relaxation time show a continuous increase as a function of time. A considerable amount of discussion has revolved around the nature of this dispersion, speci… ▽ More An aqueous dispersion of Laponite has been studied in the literature for over the past three decades. Typically, the aqueous dispersion of Laponite undergoes incessant evolution of its microstructure, wherein its elastic modulus and the mean relaxation time show a continuous increase as a function of time. A considerable amount of discussion has revolved around the nature of this dispersion, specifically whether it can be classified as a repulsive Wigner glass state, characterized by disconnected Laponite particles stabilized by electrostatic repulsions, or an attractive gel state, in which the particles form a percolated space-spanning network. The proponents of the Wigner glass state also conjecture that this system experiences a glass-glass transition after a period of two days has elapsed since its preparation. In this commentary, we explore this topic from a rheological point of view analyzing the published literature and performing new experiments. Aided by additional evidence from the literature, we propose that rheological behavior overwhelmingly suggests that an aqueous dispersion of Laponite undergoes sol - attractive gel transition and remains in the attractive gel state over at least up to 7 days without undergoing any additional transition. Importantly, rheology, despite being a macroscopic tool governed by principles of mechanics, offers profound insight into the microstructure of this particular system. The corresponding analysis conclusively determines the state of an aqueous dispersion of Laponite to be an attractive gel. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 19 pages, 2 figures, 1 table

Journal ref: Journal of Rheology 68 (2024) 145-152

Ductile-to-brittle transition and yielding in soft amorphous materials: perspectives and open questions

Authors: Thibaut Divoux, Elisabeth Agoritsas, Stefano Aime, Catherine Barentin, Jean-Louis Barrat, Roberto Benzi, Ludovic Berthier, Dapeng Bi, Giulio Biroli, Daniel Bonn, Philippe Bourrianne, Mehdi Bouzid, Emanuela Del Gado, Hélène Delanoë-Ayari, Kasra Farain, Suzanne Fielding, Matthias Fuchs, Jasper van der Gucht, Silke Henkes, Maziyar Jalaal, Yogesh M. Joshi, Anaël Lemaître, Robert L. Leheny, Sébastien Manneville, Kirsten Martens , et al. (15 additional authors not shown)

Abstract: Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a worksh… ▽ More Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a workshop held from January 9 to 13, 2023 at the Lorentz Center in Leiden. The manuscript presented here offers a critical perspective on the subject, synthesizing insights from the various brainstorming sessions and informal discussions that unfolded during this week of vibrant exchange of ideas. The result of these exchanges takes the form of a series of open questions that represent outstanding experimental, numerical, and theoretical challenges to be tackled in the near future. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 21 pages, 7 figures, perspective on the workshop 'Yield stress and fluidization in brittle and ductile amorphous systems' held from January 9 to 13, 2023 at the Lorentz Center in Leiden

Journal ref: Soft Matter, 2024,20, 6868-6888

Exploring Thixotropic Timescale: Phenomenological Insights and Analytical Perspectives

Authors: Yogesh M Joshi

Abstract: Thixotropy is characterized by an increase in viscosity when a material is subjected to no flow (quiescent) or weak flow conditions and a decrease in viscosity when it is subjected to strong flow conditions. The characteristic timescale associated with the thixotropic phenomenon, particularly how the viscosity increases with time, has been termed the thixotropic timescale. In the literature, sever… ▽ More Thixotropy is characterized by an increase in viscosity when a material is subjected to no flow (quiescent) or weak flow conditions and a decrease in viscosity when it is subjected to strong flow conditions. The characteristic timescale associated with the thixotropic phenomenon, particularly how the viscosity increases with time, has been termed the thixotropic timescale. In the literature, several approaches have been suggested for estimating the thixotropic timescale. The most prominent approach, however, infers it from a specific form of a kinetic expression for structure parameter evolution. In this paper, we study the various kinds of structural kinetic models, and by carrying out a careful analysis of the same, we propose a parameter for the thixotropic timescale that is associated with the most generic form of the kinetic expression for structure parameter evolution. We observe that when the viscosity of the structural kinetic model undergoes continuous increase with time and eventually diverges under quiescent conditions, which we believe is the most practical scenario, our analysis suggests that increasing the thixotropic timescale weakens the thixotropic character of a system. We also propose a new phenomenological measure of the thixotropic timescale: ${{τ}_{thix}}={{\left( d\text{ln}η/dt \right)}^{-1}}$, where $η$ is viscosity and $t$ is time. The proposed definition allows a straightforward and unique way to determine thixotropic timescale through experiments and agrees well with the conventional notion of thixotropy. △ Less

Submitted 1 January, 2024; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: 34 Pages, 4 figures and 1 table

On the stability and pulsation in models of B[e] star MWC 137

Authors: Sugyan Parida, Abhay Pratap Yadav, Michaela Kraus, Wolfgang Glatzel, Yogesh Chandra Joshi, Santosh Joshi

Abstract: B[e] type stars are characterised by strong emission lines, photometric $\&$ spectroscopic variabilities and unsteady mass-loss rates. MWC 137 is a galactic B[e] type star situated in the constellation Orion. Recent photometric observation of MWC 137 by TESS has revealed variabilities with a dominant period of 1.9 d. The origin of this variability is not known but suspected to be from stellar puls… ▽ More B[e] type stars are characterised by strong emission lines, photometric $\&$ spectroscopic variabilities and unsteady mass-loss rates. MWC 137 is a galactic B[e] type star situated in the constellation Orion. Recent photometric observation of MWC 137 by TESS has revealed variabilities with a dominant period of 1.9 d. The origin of this variability is not known but suspected to be from stellar pulsation. To understand the nature and origin of this variability, we have constructed three different set of models of MWC 137 and performed non-adiabatic linear stability analysis. Several low order modes are found to be unstable in which models having mass in the range of 31 to 34 M$_{\odot}$ and 43 to 46 M$_{\odot}$ have period close to 1.9 d. The evolution of instabilities in the non-linear regime for model having solar chemical composition and mass of 45 M$_{\odot}$ leads to finite amplitude pulsation with a period of 1.9 d. Therefore in the present study we confirm that this variability in MWC 137 is due to pulsation. Evolutionary tracks passing through the location of MWC 137 in the HR diagram indicate that the star is either in post main sequence evolutionary phase or about to enter in this evolutionary phase. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Comments: Accepted for publication in MNRAS, 10 pages with 12 figures

Bidirectional multi-photon communication between remote superconducting nodes

Authors: Joel Grebel, Haoxiong Yan, Ming-Han Chou, Gustav Andersson, Christopher R. Conner, Yash J. Joshi, Jacob M. Miller, Rhys G. Povey, Hong Qiao, Xuntao Wu, Andrew N. Cleland

Abstract: Quantum communication testbeds provide a useful resource for experimentally investigating a variety of communication protocols. Here we demonstrate a superconducting circuit testbed with bidirectional multi-photon state transfer capability using time-domain shaped wavepackets. The system we use to achieve this comprises two remote nodes, each including a tunable superconducting transmon qubit and… ▽ More Quantum communication testbeds provide a useful resource for experimentally investigating a variety of communication protocols. Here we demonstrate a superconducting circuit testbed with bidirectional multi-photon state transfer capability using time-domain shaped wavepackets. The system we use to achieve this comprises two remote nodes, each including a tunable superconducting transmon qubit and a tunable microwave-frequency resonator, linked by a 2 m-long superconducting coplanar waveguide, which serves as a transmission line. We transfer both individual and superposition Fock states between the two remote nodes, and additionally show that this bidirectional state transfer can be done simultaneously, as well as used to entangle elements in the two nodes. △ Less

Submitted 29 September, 2023; originally announced October 2023.

Comments: Main Paper has 6 pages, 4 figures. Supplementary has 14 pages, 16 figures, 2 tables

Rheological Investigation of The Network Structure in Mixed Gels of Kappa and Iota Carrageenan

Authors: Tulika Bhattacharyya, Chandra S Palla, Dattatraya H. Dethe, Yogesh M. Joshi

Abstract: Carrageenans comprise linear sulfated high molecular weight polysaccharides obtained from seaweeds and are routinely used in food and home/personal care industries. Various kinds of carrageenans differ from others based on the ester sulfate group location on the polysaccharide chains. Pure and mixed systems of Kappa Carrageenan and Iota Carrageenan undergo a three-dimensional gel network structure… ▽ More Carrageenans comprise linear sulfated high molecular weight polysaccharides obtained from seaweeds and are routinely used in food and home/personal care industries. Various kinds of carrageenans differ from others based on the ester sulfate group location on the polysaccharide chains. Pure and mixed systems of Kappa Carrageenan and Iota Carrageenan undergo a three-dimensional gel network structure formation or dissociation with a change in temperature. During the sol-gel and gel-sol transitions, the Carrageenan systems pass through a unique critical gel state, where dynamic moduli are scale-invariant owing to the self-similar structure of the three-dimensional network. In this work, we obtain the critical gel state associated with pure and mixed systems of Kappa and Iota Carrageenan during cooling and heating by exploring the material behavior for a range of frequencies. Interestingly, on the one hand, the mixed gels show a higher critical sol-gel transition temperature compared to the pure systems at equal individual concentrations. On the other hand, the low temperature moduli of mixed gels are closer to that of Kappa Carrageenan when the concentration of the same is more than half in the mixture. The rheological measurements demonstrate that the Kappa Carrageenan strongly affects the nature of aggregation of double helices of Iota Carrageenan, but Iota Carrageenan does not have a significant influence on that of Kappa Carrageenan. These results suggest an associative, interactive network formation between Kappa and Iota Carrageenan in the mixture, such that the gel behavior is predominantly influenced by Kappa Carrageenan. △ Less

Submitted 22 September, 2023; originally announced September 2023.

Mobile Object Tracking in Panoramic Video and LiDAR for Radiological Source-Object Attribution and Improved Source Detection

Authors: M. R. Marshall, R. J. Cooper, J. C. Curtis, D. Hellfeld, T. H. Y. Joshi, M. Salathe, K. Vetter

Abstract: The addition of contextual sensors to mobile radiation sensors provides valuable information about radiological source encounters that can assist in adjudication of alarms. This study explores how computer-vision based object detection and tracking analyses can be used to augment radiological data from a mobile detector system. We study how contextual information (streaming video and LiDAR) can be… ▽ More The addition of contextual sensors to mobile radiation sensors provides valuable information about radiological source encounters that can assist in adjudication of alarms. This study explores how computer-vision based object detection and tracking analyses can be used to augment radiological data from a mobile detector system. We study how contextual information (streaming video and LiDAR) can be used to associate dynamic pedestrians or vehicles with radiological alarms to enhance both situational awareness and detection sensitivity. Possible source encounters were staged in a mock urban environment where participants included pedestrians and vehicles moving in the vicinity of an intersection. Data was collected with a vehicle equipped with 6 NaI(Tl) 2 inch times 4 inch times 16 inch detectors in a hexagonal arrangement and multiple cameras, LiDARs, and an IMU. Physics-based models that describe the expected count rates from tracked objects are used to correlate vehicle and/or pedestrian trajectories to measured count-rate data through the use of Poisson maximum likelihood estimation and to discern between source-carrying and non-source-carrying objects. In this work, we demonstrate the capabilities of our source-object attribution approach as applied to a mobile detection system in the presence of moving sources to improve both detection sensitivity and situational awareness in a mock urban environment. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Characterization of Eclipsing Binary System EPIC 211982753

Authors: Alaxender Panchal, Yogesh C. Joshi

Abstract: We present the physical parameters of an eclipsing binary system EPIC 211982753 derived through photometric and radial velocity data modeling. We make use of photometric data from NASA's K2 mission, ASAS-SN, and 1.3-m Devasthal Fast Optical Telescope (DFOT) while spectroscopic data have been acquired from the HERMES spectrograph at the 1.2-m Mercator telescope. The linear ephemeris for the system… ▽ More We present the physical parameters of an eclipsing binary system EPIC 211982753 derived through photometric and radial velocity data modeling. We make use of photometric data from NASA's K2 mission, ASAS-SN, and 1.3-m Devasthal Fast Optical Telescope (DFOT) while spectroscopic data have been acquired from the HERMES spectrograph at the 1.2-m Mercator telescope. The linear ephemeris for the system is updated using the K2 mission data. The synthetic light curve and radial velocity curves are generated with the help of eclipsing binary modeling package PHOEBE 1.0. The masses of primary and secondary components are determined as 1.64 $\pm$0.02 and 1.55 $\pm$0.01 $M_{\odot}$, respectively. The radius for primary and secondary components are estimated as 1.73 $\pm$0.02 and 1.47 $\pm$0.02 $R_{\odot}$, respectively. The distance of the system is calculated as 238 $\pm$ 4 pc. The eclipsing binary is found to be a total eclipsing system with a high mass ratio of q=0.94. △ Less

Submitted 22 August, 2023; originally announced August 2023.

Comments: Proceeding paper of the 3rd Belgo-Indian Network for Astronomy and Astrophysics (BINA) workshop, Accepted for publication in the Bulletin of Liège Royal Society of Sciences

Investigation of orbital period changes in 9 contact binaries

Authors: Yogesh C. Joshi, Alaxendra Panchal

Abstract: We present the results for orbital period analysis of 9 contact binaries (CBs). The photometric data analyzed in this work is collected using ARIES 1-m and 1.3-m telescopes as well as many ground and space-based photometric surveys. The precise orbital periods of the binary systems are studied using the long temporal baseline of data acquired over the last 12-15 years. The changes in the times of… ▽ More We present the results for orbital period analysis of 9 contact binaries (CBs). The photometric data analyzed in this work is collected using ARIES 1-m and 1.3-m telescopes as well as many ground and space-based photometric surveys. The precise orbital periods of the binary systems are studied using the long temporal baseline of data acquired over the last 12-15 years. The changes in the times of minimum brightness are calculated using (O-C) diagram. Out of these 9 CBs, four systems show no change in the orbital period with time while the remaining five systems show non-linear (O-C) variations with time. We derive mass transfer rates for these five CBs which suggests mass is being transferred from secondary to primary components in three systems while it is from primary to secondary components in the other two systems. △ Less

Submitted 22 August, 2023; originally announced August 2023.

Comments: Proceeding paper of the 3rd Belgo-Indian Network for Astronomy and Astrophysics (BINA) workshop, Accepted for publication in the Bulletin of Liège Royal Society of Sciences

Two-dimensional optomechanical crystal resonator in gallium arsenide

Authors: Rhys G. Povey, Ming-Han Chou, Gustav Andersson, Christopher R. Conner, Joel Grebel, Yash J. Joshi, Jacob M. Miller, Hong Qiao, Xuntao Wu, Haoxiong Yan, Andrew N. Cleland

Abstract: In the field of quantum computation and communication there is a compelling need for quantum-coherent frequency conversion between microwave electronics and infra-red optics. A promising platform for this is an optomechanical crystal resonator that uses simultaneous photonic and phononic crystals to create a co-localized cavity coupling an electromagnetic mode to an acoustic mode, which then via e… ▽ More In the field of quantum computation and communication there is a compelling need for quantum-coherent frequency conversion between microwave electronics and infra-red optics. A promising platform for this is an optomechanical crystal resonator that uses simultaneous photonic and phononic crystals to create a co-localized cavity coupling an electromagnetic mode to an acoustic mode, which then via electromechanical interactions can undergo direct transduction to electronics. The majority of work in this area has been on one-dimensional nanobeam resonators which provide strong optomechanical couplings but, due to their geometry, suffer from an inability to dissipate heat produced by the laser pumping required for operation. Recently, a quasi-two-dimensional optomechanical crystal cavity was developed in silicon exhibiting similarly strong coupling with better thermalization, but at a mechanical frequency above optimal qubit operating frequencies. Here we adapt this design to gallium arsenide, a natural thin-film single-crystal piezoelectric that can incorporate electromechanical interactions, obtaining a mechanical resonant mode at f_m ~ 4.5 GHz ideal for superconducting qubits, and demonstrating optomechanical coupling g_om/(2pi) ~ 650 kHz. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Study of instabilities and outbursts in luminous blue variables AF And $\&$ R 127

Authors: Abhay Pratap Yadav, Sugyan Parida, Yogesh Chandra Joshi, Santosh Joshi

Abstract: Luminous blue variables (LBVs) are evolved massive stars close to the Eddington limit, with a distinct spectroscopic and photometric variability having unsteady mass-loss rates. These stars show a considerable change in their surface temperature from quiescent to outbursts phase. The cause of irregular variability and unsteady mass-loss rate is not properly understood. Here we present the result o… ▽ More Luminous blue variables (LBVs) are evolved massive stars close to the Eddington limit, with a distinct spectroscopic and photometric variability having unsteady mass-loss rates. These stars show a considerable change in their surface temperature from quiescent to outbursts phase. The cause of irregular variability and unsteady mass-loss rate is not properly understood. Here we present the result of linear stability analysis in two LBVs AF And and R 127 during their quiescent and outburst phase. We note that several modes are unstable in the models of the considered LBVs. Mode interaction is frequent in the modal diagrams for the models of both LBVs. For AF And, number of instabilities increase in models having temperature below 15000 K. The found instabilities may be linked with the observed irregular variabilities and surface eruptions. Observational facilities of Belgo-Indian Network for Astronomy and Astrophysics (BINA) will be very beneficial to study the spectroscopic and photometric behavior of the considered LBVs. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Comments: 7 pages, 3 figures, Proceedings paper of the third Belgo-Indian Network for Astronomy and Astrophysics (BINA) workshop, Accepted for publication in the Bulletin of Liège Royal Society of Sciences

Broadband Bandpass Purcell Filter for Circuit Quantum Electrodynamics

Authors: Haoxiong Yan, Xuntao Wu, Andrew Lingenfelter, Yash J. Joshi, Gustav Andersson, Christopher R. Conner, Ming-Han Chou, Joel Grebel, Jacob M. Miller, Rhys G. Povey, Hong Qiao, Aashish A. Clerk, Andrew N. Cleland

Abstract: In circuit quantum electrodynamics (QED), qubits are typically measured using dispersively-coupled readout resonators. Coupling between each readout resonator and its electrical environment however reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity, but reduces measurement bandwidth and thus limits multiplexing… ▽ More In circuit quantum electrodynamics (QED), qubits are typically measured using dispersively-coupled readout resonators. Coupling between each readout resonator and its electrical environment however reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity, but reduces measurement bandwidth and thus limits multiplexing readout capacity. In this letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line--based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors. △ Less

Submitted 18 July, 2023; v1 submitted 9 June, 2023; originally announced June 2023.

Journal ref: Appl. Phys. Lett. 123, 134001 (2023)

The statistical analysis of the dynamical evolution of the open clusters

Authors: Jayanand Maurya, Y. C. Joshi, Manash Ranjan Samal, Vineet Rawat, Anubha Singh Gour

Abstract: We present the dynamical evolution of ten open clusters which were part of our previous studies. These clusters include both young and intermediate-age open clusters with ages ranging from 25$\pm$19 Myr to 1.78$\pm$0.20 Gyr. The total mass of these clusters ranges from 356.18$\pm$142.90 to 1811.75$\pm$901.03 M$_{\odot}$. The Galactocentric distances to the clusters are in the range of 8.91$\pm$0.0… ▽ More We present the dynamical evolution of ten open clusters which were part of our previous studies. These clusters include both young and intermediate-age open clusters with ages ranging from 25$\pm$19 Myr to 1.78$\pm$0.20 Gyr. The total mass of these clusters ranges from 356.18$\pm$142.90 to 1811.75$\pm$901.03 M$_{\odot}$. The Galactocentric distances to the clusters are in the range of 8.91$\pm$0.02 to 11.74$\pm$0.18 kpc. The study is based on the ground-based UBVRI data supplemented by the astrometric data from the Gaia archive. We studied the minimum spanning tree of the member stars for these clusters. The mass segregation in these clusters was quantified by mass segregation ratios calculated from the mean edge length obtained through the minimum spanning tree. The clusters NGC 2360, NGC 1960, IC 1442, King 21, and SAI 35 have $Γ_{MSR}$ to be 1.65$\pm$0.18, 1.94$\pm$0.22, 2.21$\pm$0.20, 1.84$\pm$0.23, and 1.96$\pm$0.25, respectively which indicate moderate mass segregation in these clusters. The remaining five clusters are found to exhibit weak or no mass segregation. We used the ratio of half mass radius to the tidal radius i.e. R$_{h}$/R$_{t}$ to investigate the effect of the tidal interactions on the cluster structure and dynamics. The ratios of half mass radii to tidal radii are found to be positively correlated with the Galactocentric distances with a linear slope of 0.06$\pm$0.01 having linear regression coefficient r-square = 0.93 for the clusters. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Comments: 9 pages, 3 figures, 2 tables

Background and Anomaly Learning Methods for Static Gamma-ray Detectors

Authors: M. S. Bandstra, N. Abgrall, R. J. Cooper, D. Hellfeld, T. H. Y. Joshi, V. Negut, B. J. Quiter, M. Salathe, R. Sankaran, Y. Kim, S. Shahkarami

Abstract: Static gamma-ray detector systems that are deployed outdoors for radiological monitoring purposes experience time- and spatially-varying natural backgrounds and encounters with man-made nuisance sources. In order to be sensitive to illicit sources, such systems must be able to distinguish those sources from benign variations due to, e.g., weather and human activity. In addition to fluctuations due… ▽ More Static gamma-ray detector systems that are deployed outdoors for radiological monitoring purposes experience time- and spatially-varying natural backgrounds and encounters with man-made nuisance sources. In order to be sensitive to illicit sources, such systems must be able to distinguish those sources from benign variations due to, e.g., weather and human activity. In addition to fluctuations due to non-threats, each detector has its own response and energy resolution, so providing a large network of detectors with predetermined background and source templates can be an onerous task. Instead, we propose that static detectors use simple physics-informed algorithms to automatically learn the background and nuisance source signatures, which can them be used to bootstrap and feed into more complex algorithms. Specifically, we show that non-negative matrix factorization (NMF) can be used to distinguish static background from the effects of increased concentrations of radon progeny due to rainfall. We also show that a simple process of using multiple gross count rate filters can be used in real time to classify or ``triage'' spectra according to whether they belong to static, rain, or anomalous categories for processing with other algorithms. If a rain sensor is available, we propose a method to incorporate that signal as well. Two clustering methods for anomalous spectra are proposed, one using Kullback-Leibler divergence and the other using regularized NMF, with the goal of finding clusters of similar spectral anomalies that can be used to build anomaly templates. Finally we describe the issues involved in the implementation of some of these algorithms on deployed sensor nodes, including the need to monitor the background models for long-term drifting due to physical changes in the environment or changes in detector performance. △ Less

Submitted 7 September, 2023; v1 submitted 3 April, 2023; originally announced April 2023.

Comments: 12 pages, 6 figures, accepted for publication in IEEE Transactions on Nuclear Science

Revisiting the Transit Timing and Atmosphere Characterization of the Neptune-mass Planet HAT-P-26 b

Authors: Napaporn A-thano, Supachai Awiphan, Ing-Guey Jiang, Eamonn Kerins, Akshay Priyadarshi, Iain McDonald, Yogesh C. Joshi, Thansuda Chulikorn, Joshua J. C. Hayes, Stephen Charles, Chung-Kai Huang, Ronnakrit Rattanamala, Li-Chin Yeh, Vik S Dhillon

Abstract: We present the transit timing variation (TTV) and planetary atmosphere analysis of the Neptune-mass planet HAT-P-26~b. We present a new set of 13 transit light curves from optical ground-based observations and combine them with light curves from the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST), Transiting Exoplanet Survey Satellite (TESS), and previously published ground-based da… ▽ More We present the transit timing variation (TTV) and planetary atmosphere analysis of the Neptune-mass planet HAT-P-26~b. We present a new set of 13 transit light curves from optical ground-based observations and combine them with light curves from the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST), Transiting Exoplanet Survey Satellite (TESS), and previously published ground-based data. We refine the planetary parameters of HAT-P-26 b and undertake a TTV analysis using 33 transits obtained over seven years. The TTV analysis shows an amplitude signal of 1.98 $\pm$ 0.05 minutes, which could result from the presence of an additional $0.02 M_{Jup}$ planet at the 1:2 mean-motion resonance orbit. Using a combination of transit depths spanning optical to near-infrared wavelengths, we find that the atmosphere of HAT-P-26 b contains $2.4^{+2.9}_{-1.6}$% of H$_2$O with a derived temperature of $590^{+60}_{-50}$ K. △ Less

Submitted 27 September, 2023; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: 34 pages, accepted by AJ

Developing a platform for linear mechanical quantum computing

Authors: Hong Qiao, Etienne Dumur, Gustav Andersson, Haoxiong Yan, Ming-Han Chou, Joel Grebel, Christopher R. Conner, Yash J. Joshi, Jacob M. Miller, Rhys G. Povey, Xuntao Wu, Andrew N. Cleland

Abstract: Linear optical quantum computing provides a desirable approach to quantum computing, with a short list of required elements. The similarity between photons and phonons points to the interesting potential for linear mechanical quantum computing (LMQC), using phonons in place of photons. While single-phonon sources and detectors have been demonstrated, a phononic beamsplitter element remains an outs… ▽ More Linear optical quantum computing provides a desirable approach to quantum computing, with a short list of required elements. The similarity between photons and phonons points to the interesting potential for linear mechanical quantum computing (LMQC), using phonons in place of photons. While single-phonon sources and detectors have been demonstrated, a phononic beamsplitter element remains an outstanding requirement. Here we demonstrate such an element, using two superconducting qubits to fully characterize a beamsplitter with single phonons. We further use the beamsplitter to demonstrate two-phonon interference, a requirement for two-qubit gates, completing the toolbox needed for LMQC. This advance brings linear quantum computing to a fully solid-state system, along with straightforward conversion between itinerant phonons and superconducting qubits. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Transient shear banding during startup flow: Insights from nonlinear simulations

Authors: Shweta Sharma, Yogesh M. Joshi, V. Shankar

Abstract: We study the dynamics of shear startup of the Johnson-Segalman and non-stretching Rolie-Poly models using nonlinear simulations. We consider cases where the startup is from zero shear rate to shear rates in both the monotonic and nonmonotonic regions of the constitutive curve. For the Johnson-Segalman model, which exhibits a shear stress overshoot during startup, our nonlinear simulations show tha… ▽ More We study the dynamics of shear startup of the Johnson-Segalman and non-stretching Rolie-Poly models using nonlinear simulations. We consider cases where the startup is from zero shear rate to shear rates in both the monotonic and nonmonotonic regions of the constitutive curve. For the Johnson-Segalman model, which exhibits a shear stress overshoot during startup, our nonlinear simulations show that transient shear banding is absent regardless of whether the start-up shear rate is in the monotonic or nonmonotonic regions of the constitutive curve. In the latter case, while there is clearly an inhomogeneity en route to the banded state, the extent of shear banding is not substantially large compared to that of the eventual banded state. Marked inhomogeneity in the velocity profile is predicted for the non-stretching Rolie-Poly model only if the solvent to solution viscosity ratio is smaller than O(10^(-3), but its occurrence does not appear to have any correlation with the stress overshoot during startup. These inhomogeneities are also very sensitive to initial amplitude of perturbations and the magnitude of Reynolds number. Our nonlinear simulations show that the transient evolution during shear startup is quite sensitive to the Reynolds number when the solvent viscosity parameter is much smaller than unity for non-stretching Rolie-Poly model. However, the results of the Johnson-Segalman model are very robust for solvent to solution viscosity greater than O(10^(-3) and do not reveal any transient shear banding during shear startup. △ Less

Submitted 13 February, 2023; originally announced February 2023.

Comments: 47 pages, 25 figures

The Method of Harmonic Balance for the Giesekus Model under Oscillatory Shear

Authors: Shivangi Mittal, Yogesh M. Joshi, Sachin Shanbhag

Abstract: The method of harmonic balance (HB) is a spectrally accurate method used to obtain periodic steady state solutions to dynamical systems subjected to periodic perturbations. We adapt HB to solve for the stress response of the Giesekus model under large amplitude oscillatory shear (LAOS) deformation. HB transforms the system of differential equations to a set of nonlinear algebraic equations in the… ▽ More The method of harmonic balance (HB) is a spectrally accurate method used to obtain periodic steady state solutions to dynamical systems subjected to periodic perturbations. We adapt HB to solve for the stress response of the Giesekus model under large amplitude oscillatory shear (LAOS) deformation. HB transforms the system of differential equations to a set of nonlinear algebraic equations in the Fourier coefficients. Convergence studies find that the difference between the HB and true solutions decays exponentially with the number of harmonics ($H$) included in the ansatz as $e^{-m H}$. The decay coefficient $m$ decreases with increasing strain amplitude, and exhibits a "U" shaped dependence on applied frequency. The computational cost of HB increases slightly faster than linearly with $H$. The net result of rapid convergence and modest increase in computational cost with increasing $H$ implies that HB outperforms the conventional method of using numerical integration to solve differential constitutive equations under oscillatory shear. Numerical experiments find that HB is simultaneously about three orders of magnitude cheaper, and several orders of magnitude more accurate than numerical integration. Thus, it offers a compelling value proposition for parameter estimation or model selection. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: submitted to JNNFM

Journal ref: Journal of Non-Newtonian Fluid Mechanics Volume 321, 2023, 105092

Optical characterization and Radial velocity monitoring with Belgian and Indian Telescopes (ORBIT): the eclipsing binaries EPIC 211982753 and EPIC 211915147

Authors: Alaxender Panchal, Y. C. Joshi, Peter De Cat, Patricia Lampens, Aruna Goswami, S. N. Tiwari

Abstract: The K2 eclipsing binary candidates EPIC 211982753 (hereinafter called EPIC2753) and EPIC 211915147 (hereinafter called EPIC5147) are characterized with the help of photometric and high-resolution spectroscopic data. The light curve analysis uses the R-band photometric data from the 1.3-m Devasthal Fast Optical Telescope (DFOT, India), ASAS-3 and K2 observations. High-resolution echelle spectra are… ▽ More The K2 eclipsing binary candidates EPIC 211982753 (hereinafter called EPIC2753) and EPIC 211915147 (hereinafter called EPIC5147) are characterized with the help of photometric and high-resolution spectroscopic data. The light curve analysis uses the R-band photometric data from the 1.3-m Devasthal Fast Optical Telescope (DFOT, India), ASAS-3 and K2 observations. High-resolution echelle spectra are collected using the HERMES spectrograph at the 1.2-m MERCATOR telescope (La Palma, Spain). The synthetic light and radial velocity curves are generated with the help of the modeling package PHOEBE 1.0. The orbital period analysis based on the ~3.2 years of K2 observations does not show any change in the orbital period of both targets. The component masses M1,2 are estimated as 1.69(0.02) and 1.59(0.02) solar mass for EPIC2753, and 1.48(0.01) and 1.27(0.01) solar mass for EPIC5147. Both systems are high mass-ratio eclipsing binaries with q>0.85. The component radii R1,2 are found to be 1.66(0.02) and 1.53(0.02) solar radius for EPIC2753, and 1.80(0.05) and 1.42(0.05) solar radius for EPIC5147. The distances of EPIC2753 and EPIC5147 are determined as 238(4) and 199(5) pc, respectively. MESA Isochrones and Stellar Tracks are used to understand the evolutionary status of both systems. △ Less

Submitted 14 February, 2023; v1 submitted 15 January, 2023; originally announced January 2023.

Comments: Accepted for publication in MNRAS

Investigating stellar variability in the open cluster region NGC 381

Authors: Jayanand Maurya, Yogesh C. Joshi, A. Panchal, A. S. Gour

Abstract: We study variable stars in the field of the open cluster NGC 381 using photometric data observed over 27 nights and identify a total of 57 variable stars out of which five are member stars. The variable stars are classified based on their periods, amplitudes, light curve shapes, and locations in the H-R diagram. We found a rich variety of variable stars in the cluster. We identified a total of 10… ▽ More We study variable stars in the field of the open cluster NGC 381 using photometric data observed over 27 nights and identify a total of 57 variable stars out of which five are member stars. The variable stars are classified based on their periods, amplitudes, light curve shapes, and locations in the H-R diagram. We found a rich variety of variable stars in the cluster. We identified a total of 10 eclipsing binaries out of which 2 are Algol type (EA) while 8 are W UMa type (EW) binaries. The estimated ages of these EW binaries are greater than 0.6 Gyr which is in agreement with the formation time constraint of > 0.6 Gyr on short-period eclipsing binaries. The estimation of the physical parameters of the three EW type binaries is done using PHOEBE model-fitting software. The pulsating variable stars include one each from δ Scuti and γ Dor variability class. We determined the pulsation modes of pulsating variables with the help of the FAMIAS package. We obtained 15 rotational variables stars comprising four dwarf stars identified on the basis log(g) versus log(Tef f ) diagram. These dwarf stars are found to have generally larger periods than the remaining rotational variables. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: The paper is accepted for publication in The Astronomical Journal (AJ). It contains 6 tables and 14 figures

Revisiting Galactic disk and spiral arms using open clusters

Authors: Yogesh C. Joshi, Sagar Malhotra

Abstract: We use the largest open clusters catalogue in the post-Gaia era to provide the observational view of the Galactic disk. By compiling the physical parameters like age, distance, and kinematic information, we investigate the spatial distribution of the open clusters and revisit the spiral arms and other asymmetries in the Galactic disk. Using the young open clusters as a tracer of spiral arms, we ma… ▽ More We use the largest open clusters catalogue in the post-Gaia era to provide the observational view of the Galactic disk. By compiling the physical parameters like age, distance, and kinematic information, we investigate the spatial distribution of the open clusters and revisit the spiral arms and other asymmetries in the Galactic disk. Using the young open clusters as a tracer of spiral arms, we map the spiral structure of the Galaxy and found that most of the clusters start migrating away from the spiral arms in about 10-20 Myr and fill the inter-arm regions as their age progress. Using the 3D kinematic information of 371 open star clusters, we derived different individual pattern speeds for spiral arms closely following the Milky Way rotation curve, hence favouring the transient nature of Milky Way spiral arms. The pattern rotation speeds of each spiral arm suggest that the spiral arms have not accelerated in the last 80 Myrs. Based on the distribution of open clusters younger than 700 Myr above or below the Galactic plane, we found a Solar offset of $z_\odot = 17.0\pm0.9$ pc north of the Galactic plane and estimated the scale height $z_h = 91.7 \pm 1.9$ pc from the Galactic plane. △ Less

Submitted 6 September, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 12 pages, 7 figures, 3 tables, paper is accepted for publication in the Astronomical Journal

Peeping into recent star formation history of the Magellanic Clouds

Authors: Yogesh C. Joshi, Alaxender Panchal

Abstract: Here, we study the distribution of Fundamental-mode Cepheids in the Magellanic Cloud as a function of their positions and ages using the data from the OGLE~IV survey. Age of the Cepheids are determined through well known period - age relations for the LMC and SMC Cepheids which are used to understand the star formation scenario in the Magellanic Cloud. The age distributions of the Cepheids in LMC… ▽ More Here, we study the distribution of Fundamental-mode Cepheids in the Magellanic Cloud as a function of their positions and ages using the data from the OGLE~IV survey. Age of the Cepheids are determined through well known period - age relations for the LMC and SMC Cepheids which are used to understand the star formation scenario in the Magellanic Cloud. The age distributions of the Cepheids in LMC and SMC show peak around $155^{+45}_{-35}$ Myr and $224^{+51}_{-42}$ Myr, respectively. This indicates that a major star formation event took place in the Magellanic Cloud at about 200\,Myr ago. It is believed that this event might have been triggered by a close encounter between the two components of the Magellanic Cloud or due to a possible tidal interaction between the Magellanic Cloud and Milky Way galaxy during one of its pericentric passages round the Milky Way. Cepheids are found to be asymmetrically distributed in both the LMC and SMC. A high-density clumpy structure is found to be located towards eastern side of the LMC and south-west direction of the SMC from their respective galactic centres. △ Less

Submitted 19 May, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: Published in the Journal of Astrophysics & Astronomy (2023, JoAA, 44, 45), contribution to the proceedings of "Star formation studies in the context of NIR instruments on 3.6-m DOT"

Large Amplitude Oscillatory Shear Study of a Colloidal Gel at the Critical State

Authors: Khushboo Suman, Sachin Shanbhag, Yogesh M. Joshi

Abstract: We investigate the nonlinear viscoelastic behavior of a colloidal dispersion at the critical gel state using large amplitude oscillatory shear (LAOS) rheology. The colloidal gel at the critical point is subjected to oscillatory shear flow with increasing strain amplitude at different frequencies. We observe that the first harmonic of the elastic and viscous moduli exhibits a monotonic decrease as… ▽ More We investigate the nonlinear viscoelastic behavior of a colloidal dispersion at the critical gel state using large amplitude oscillatory shear (LAOS) rheology. The colloidal gel at the critical point is subjected to oscillatory shear flow with increasing strain amplitude at different frequencies. We observe that the first harmonic of the elastic and viscous moduli exhibits a monotonic decrease as the material undergoes a linear to nonlinear transition. We analyze the stress waveform across this transition and obtain the nonlinear moduli and viscosity as a function of frequency and strain amplitude. The analysis of the nonlinear moduli and viscosities suggests intracycle strain stiffening and intracycle shear thinning in the colloidal dispersion. Based on the insights obtained from the nonlinear analysis, we propose a potential scenario of the microstructural changes occurring in the nonlinear region. We also develop an integral model using the time-strain separable K-BKZ constitutive equation with a power-law relaxation modulus and damping function obtained from experiments. At low strain amplitudes, this model compares well with experimental data at all frequencies. However, a stronger damping function, which can be efficiently inferred using a spectral method, is required to obtain quantitative fits across the entire range of strain amplitudes and the explored frequencies. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 34 pages, 10 figures

Gel-Sol Transition of Thermoresponsive Poly(vinyl alcohol) Solution: Validation of the Universal Critical Scaling Relations

Authors: Tulika Bhattacharyya, Khushboo Suman, Yogesh M. Joshi

Abstract: While undergoing gelation transition, a material passes through a distinctive state called the critical gel state. In the neighborhood of this critical gel state, how viscosity, equilibrium modulus, and relaxation times evolve are correlated by scaling relations, and their universality has been validated for materials undergoing the sol to gel transition. In this work, we extend this approach for… ▽ More While undergoing gelation transition, a material passes through a distinctive state called the critical gel state. In the neighborhood of this critical gel state, how viscosity, equilibrium modulus, and relaxation times evolve are correlated by scaling relations, and their universality has been validated for materials undergoing the sol to gel transition. In this work, we extend this approach for the gel to sol transition of a thermoresponsive polymeric system of aqueous Poly(vinyl alcohol) (PVOH) gel that passes through the critical state upon increasing temperature. We observe that, in the neighborhood of the critical gel state, the equilibrium modulus and viscosity demonstrate a power law dependence on the relative distance from the critical state in terms of normalized temperature. Furthermore, the relaxation times in the gel and the sol state shows symmetric power law divergence near the critical state. The corresponding critical power law exponents and the dynamic critical exponents computed at the critical gel to sol transition state validate the scaling and hyperscaling relations originally proposed for the critical sol to gel transition very well. Remarkably, the dependence of complex viscosity on frequency at different temperatures shows a comprehensive mastercurve irrespective of the temperature ramp rate independently in the gel and the sol state. This observation demonstrates how the shape of relaxation time spectrum is independent of both the temperature as well as the ramp rate. Since sol to gel as well as the gel to sol transitions are opposite to each other, the applicability of the scaling relations validated in this work suggests broader symmetry associated with how the structure evolves around the critical state irrespective of the direction. △ Less

Submitted 25 November, 2022; originally announced November 2022.

On the Nature of Flow Curve and Categorization of Thixotropic Yield Stress Materials

Authors: Tulika Bhattacharyya, Alan R. Jacob, George Petekidis, Yogesh M. Joshi

Abstract: Thixotropy is a phenomenon related to time dependent change in viscosity in presence or absence of flow. The yield stress, on the other hand, represents the minimum value of stress above which steady flow can be sustained. In addition, the yield stress of a material may also change as a function of time. Both these characteristic features in a material strongly influence the steady state flow curv… ▽ More Thixotropy is a phenomenon related to time dependent change in viscosity in presence or absence of flow. The yield stress, on the other hand, represents the minimum value of stress above which steady flow can be sustained. In addition, the yield stress of a material may also change as a function of time. Both these characteristic features in a material strongly influence the steady state flow curve of the same. This study aims to understand the interrelation between thixotropy, yield stress and their relation with the flow curve. In this regard, we study five thixotropic materials that show yield stress. The relaxation time of all the five systems shows power-law dependence on aging time with behaviors ranging from weaker than linear, linear to stronger than linear. Furthermore, the elastic modulus and yield stress has been observed to be constant for some systems while time dependent for the others. We also analyze the experimental behavior through a viscoelastic thixotropic structural kinetic model that predicts the observed experimental behavior of constant as well as time-dependent yield stress quite well. These findings indicate that a non-monotonic steady-state flow curve in a structural kinetic formalism necessarily leads to time-dependent yield stress, while constant yield stress is predicted by a monotonic steady-state flow curve with stress plateau in the limit of low shear rates. The present work, therefore, shows that thixotropic materials may exhibit either monotonic or non-monotonic flow curves. Consequently, thixotropic materials may show no yield stress, constant yield stress or time-dependent yield stress. △ Less

Submitted 12 January, 2023; v1 submitted 8 September, 2022; originally announced September 2022.

Effect of Thermal and Mechanical Rejuvenation on Rheological Behavior of Chocolate

Authors: Tulika Bhattacharyya, Yogesh M Joshi

Abstract: Chocolate is known to undergo solid-liquid transition upon an increase in temperature as well as under application of deformation field. Upon sudden reduction in temperature from a molten state (or thermal rejuvenation), rheological properties of chocolate undergo evolution as a function of time under isothermal conditions, a behavior reminiscent of physical aging in polymeric glasses. Then again,… ▽ More Chocolate is known to undergo solid-liquid transition upon an increase in temperature as well as under application of deformation field. Upon sudden reduction in temperature from a molten state (or thermal rejuvenation), rheological properties of chocolate undergo evolution as a function of time under isothermal conditions, a behavior reminiscent of physical aging in polymeric glasses. Then again, subsequent to cessation of shear flow (or mechanical rejuvenation), chocolate shows temporal evolution of the rheological properties, a behavior similar to physical aging in soft glassy materials. In this work, we evaluate three rheological properties, namely, dynamic moduli, relaxation time spectrum and characteristic relaxation time of chocolate, and compare their evolution after thermal as well as mechanical rejuvenation. We observe that the evolution of the rheological properties subsequent to mechanical rejuvenation is distinctly different from that of thermal rejuvenation, wherein the evolution is more gradual in the former case. On the one hand, this work provides unique insights into how shear affects the rheological behavior of chocolate. On the other hand, this work clearly suggests that chocolate explores different sections of the energy landscape after mechanical rejuvenation compared to that of thermal rejuvenation. △ Less

Submitted 8 September, 2022; originally announced September 2022.

Journal ref: Physics of Fluids, 34 (2022) 037111

Mapping the Minimum Detectable Activities of Gamma-Ray Sources in a 3-D Scene

Authors: Mark S. Bandstra, Daniel Hellfeld, Jaewon Lee, Brian J. Quiter, Marco Salathe, Jayson R. Vavrek, Tenzing H. Y. Joshi

Abstract: The ability to formulate maps of minimum detectable activities (MDAs) that describe the sensitivity of an ad hoc measurement that used one or more freely moving radiation detector systems would be significantly beneficial for the conduct and understanding of many radiological search activities. In a real-time scenario with a free-moving detector system, an MDA map can provide useful feedback to th… ▽ More The ability to formulate maps of minimum detectable activities (MDAs) that describe the sensitivity of an ad hoc measurement that used one or more freely moving radiation detector systems would be significantly beneficial for the conduct and understanding of many radiological search activities. In a real-time scenario with a free-moving detector system, an MDA map can provide useful feedback to the operator about which areas have not been searched as thoroughly as others, thereby allowing the operator to prioritize future actions. Similarly, such a calculation could be used to inform subsequent navigation decisions of autonomous platforms. Here we describe a near real-time MDA mapping approach that can be applied when searching for point sources using detected events in a spectral region of interest while assuming a constant, unknown background rate. We show the application of this MDA mapping method to a real scenario, a survey of the interior of a small building using a handheld detector system. Repeated measurements with no sources and with Cs-137 sources of different strengths yield results consistent with the estimated thresholds and MDA values; namely, that for background-only measurements no sources are seen above threshold anywhere in the scene, while when sources are present they are detected above the thresholds calculated for their locations. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 12 pages, 9 figures, submitted to IEEE Transactions on Nuclear Science

Design and deployment of radiological point-source arrays for the emulation of continuous distributed sources

Authors: Jayson R. Vavrek, C. Corey Hines, Mark S. Bandstra, Daniel Hellfeld, Maddison A. Heine, Zachariah M. Heiden, Nick R. Mann, Brian J. Quiter, Tenzing H. Y. Joshi

Abstract: We demonstrate a method for using arrays of point sources that emulate -- when measured from a standoff of at least several meters -- distributed gamma-ray sources, and present results using this method from outdoor aerial measurements of several planar arrays each comprising up to $100$ ${\sim}7$ mCi Cu-64 sealed sources. The method relies on the Poisson deviance to statistically test whether the… ▽ More We demonstrate a method for using arrays of point sources that emulate -- when measured from a standoff of at least several meters -- distributed gamma-ray sources, and present results using this method from outdoor aerial measurements of several planar arrays each comprising up to $100$ ${\sim}7$ mCi Cu-64 sealed sources. The method relies on the Poisson deviance to statistically test whether the array source ''looks like'' its continuous analogue to a particular gamma-ray detector given the counts recorded as the detector moves about 3D space. We use this deviance metric to design eight different mock distributed sources, ranging in complexity from a $36\times36$ m uniform square grid of sources to a configuration where regions of higher and zero activity are superimposed on a uniform baseline. We then detail the design, manufacture, and testing of the ${\sim} 7$ mCi Cu-64 sealed sources at the Washington State University research reactor, and their deployment during the aerial measurement campaign. We show the results of two such measurements, in which approximate source shapes and qualitative source intensities can be seen. Operationally, we find that the point-source array technique provides high source placement accuracy and ease of quantifying the true source configuration, scalability to source dimensions of ${\lesssim}100$ m, ease of reconfiguration and removal, and relatively low dose to personnel. Finally, we consider potential improvements and generalizations of the point-source array technique for future measurement campaigns. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 15 pages, 12 figures; submitted to IEEE Transactions on Nuclear Science

Predicting Human Performance in Vertical Hierarchical Menu Selection in Immersive AR Using Hand-gesture and Head-gaze

Authors: Majid Pourmemar, Yashas Joshi, Charalambos Poullis

Abstract: There are currently limited guidelines on designing user interfaces (UI) for immersive augmented reality (AR) applications. Designers must reflect on their experience designing UI for desktop and mobile applications and conjecture how a UI will influence AR users' performance. In this work, we introduce a predictive model for determining users' performance for a target UI without the subsequent in… ▽ More There are currently limited guidelines on designing user interfaces (UI) for immersive augmented reality (AR) applications. Designers must reflect on their experience designing UI for desktop and mobile applications and conjecture how a UI will influence AR users' performance. In this work, we introduce a predictive model for determining users' performance for a target UI without the subsequent involvement of participants in user studies. The model is trained on participants' responses to objective performance measures such as consumed endurance (CE) and pointing time (PT) using hierarchical drop-down menus. Large variability in the depth and context of the menus is ensured by randomly and dynamically creating the hierarchical drop-down menus and associated user tasks from words contained in the lexical database WordNet. Subjective performance bias is reduced by incorporating the users' non-verbal standard performance WAIS-IV during the model training. The semantic information of the menu is encoded using the Universal Sentence Encoder. We present the results of a user study that demonstrates that the proposed predictive model achieves high accuracy in predicting the CE on hierarchical menus of users with various cognitive abilities. To the best of our knowledge, this is the first work on predicting CE in designing UI for immersive AR applications. △ Less

Submitted 19 June, 2022; originally announced June 2022.

SaccadeNet: Towards Real-time Saccade Prediction for Virtual Reality Infinite Walking

Authors: Yashas Joshi, Charalambos Poullis

Abstract: Modern Redirected Walking (RDW) techniques significantly outperform classical solutions. Nevertheless, they are often limited by their heavy reliance on eye-tracking hardware embedded within the VR headset to reveal redirection opportunities. We propose a novel RDW technique that leverages the temporary blindness induced due to saccades for redirection. However, unlike the state-of-the-art, our… ▽ More Modern Redirected Walking (RDW) techniques significantly outperform classical solutions. Nevertheless, they are often limited by their heavy reliance on eye-tracking hardware embedded within the VR headset to reveal redirection opportunities. We propose a novel RDW technique that leverages the temporary blindness induced due to saccades for redirection. However, unlike the state-of-the-art, our approach does not impose additional eye-tracking hardware requirements. Instead, SaccadeNet, a deep neural network, is trained on head rotation data to predict saccades in real-time during an apparent head rotation. Rigid transformations are then applied to the virtual environment for redirection during the onset duration of these saccades. However, SaccadeNet is only effective when combined with moderate cognitive workload that elicits repeated head rotations. We present three user studies. The relationship between head and gaze directions is confirmed in the first user study, followed by the training data collection in our second user study. Then, after some fine-tuning experiments, the performance of our RDW technique is evaluated in a third user study. Finally, we present the results demonstrating the efficacy of our approach. It allowed users to walk up a straight virtual distance of at least 38 meters from within a $3.5 x 3.5m^2$ of the physical tracked space. Moreover, our system unlocks saccadic redirection on widely used consumer-grade hardware without eye-tracking. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: redirected walking, virtual reality

Kramers-Kronig Relations for Nonlinear Rheology: 1. General Expression and Implications

Authors: Sachin Shanbhag, Yogesh M. Joshi

Abstract: The principle of causality leads to linear Kramers-Kronig relations (KKR) that relate the real and imaginary parts of the complex modulus $G^{*}$ through integral transforms. Using the multiple integral generalization of the Boltzmann superposition principle for nonlinear rheology, and the principle of causality, we derived nonlinear KKR, which relate the real and imaginary parts of the… ▽ More The principle of causality leads to linear Kramers-Kronig relations (KKR) that relate the real and imaginary parts of the complex modulus $G^{*}$ through integral transforms. Using the multiple integral generalization of the Boltzmann superposition principle for nonlinear rheology, and the principle of causality, we derived nonlinear KKR, which relate the real and imaginary parts of the $n^\text{th}$ order complex modulus $G_{n}^{*}$. For $n$=3, we obtained nonlinear KKR for medium amplitude parallel superposition (MAPS) rheology. A special case of MAPS is medium amplitude oscillatory shear (MAOS); we obtained MAOS KKR for the third-harmonic MAOS modulus $G_{33}^{*}$; however, no such KKR exists for the first harmonic MAOS modulus $G_{31}^{*}$. We verified MAPS and MAOS KKR for the single mode Giesekus model. We also probed the sensitivity of MAOS KKR when the domain of integration is truncated to a finite frequency window. We found that that (i) inferring $G_{33}^{\prime\prime}$ from $G_{33}^{\prime}$ is more reliable than vice-versa, (ii) predictions over a particular frequency range require approximately an excess of one decade of data beyond the frequency range of prediction, and (iii) $G_{33}^{\prime}$ is particularly susceptible to errors at large frequencies. △ Less

Submitted 18 March, 2022; originally announced March 2022.

Comments: 22 pages, 4 figures

Journal ref: J. Rheol. 66, 973-982 (2022)

Kramers-Kronig Relations for Nonlinear Rheology: 2. Validation of Medium Amplitude Oscillatory Shear (MAOS) Measurements

Authors: Sachin Shanbhag, Yogesh M. Joshi

Abstract: The frequency dependence of third-harmonic medium amplitude oscillatory shear (MAOS) modulus $G_{33}^{*}(ω)$ provides insight into material behavior and microstructure in the asymptotically nonlinear regime. Motivated by the difficulty in the measurement of MAOS moduli, we propose a test for data validation based on nonlinear Kramers-Kronig relations. We extend the approach used to assess the cons… ▽ More The frequency dependence of third-harmonic medium amplitude oscillatory shear (MAOS) modulus $G_{33}^{*}(ω)$ provides insight into material behavior and microstructure in the asymptotically nonlinear regime. Motivated by the difficulty in the measurement of MAOS moduli, we propose a test for data validation based on nonlinear Kramers-Kronig relations. We extend the approach used to assess the consistency of linear viscoelastic data by expressing the real and imaginary parts of $G_{33}^{*}(ω)$ as a linear combination of Maxwell elements: the functional form for the MAOS kernels is inspired by time-strain separability (TSS). We propose a statistical fitting technique called the SMEL test, which works well on a broad range of materials and models including those that do not obey TSS. It successfully copes with experimental data that are noisy, or confined to a limited frequency range. When Maxwell modes obtained from the SMEL test are used to predict the first-harmonic MAOS modulus $G_{31}^{*}$, it is possible to identify the range of timescales over which a material exhibits TSS. △ Less

Submitted 18 March, 2022; originally announced March 2022.

Comments: 28 pages, 7 figures