Showing 51–100 of 152 results for author: Jäger, H

Controlling Shear Jamming in Dense Suspensions via the Particle Aspect Ratio

Authors: Nicole M. James, Huayue Xue, Medha Goyal, Heinrich M. Jaeger

Abstract: Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shap… ▽ More Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shape has so far not been studied systematically. To address this we here synthesize smooth silica particles and design the particle surface chemistry to generate strong frictional interactions such that dense, aqueous suspensions of spheres exhibit pronounced shear jamming. We then vary particle aspect ratio from $Γ$=1 (spheres) to $Γ$=11 (slender rods), and perform rheological measurements to determine the effect of particle anisotropy on the onset of shear jamming and its precursor, discontinuous shear thickening. Keeping the frictional interactions fixed, we find that increasing aspect ratio significantly reduces $φ_m$, the minimum particle packing fraction at which shear jamming can be observed, to values as low $φ_m=33\%$ for $Γ$=11. The ability to independently control particle interactions due to friction and shape anisotropy yields fundamental insights about the thickening and jamming capabilities of suspensions and provides a framework to rationally design shear jamming characteristics. △ Less

Submitted 13 January, 2019; originally announced January 2019.

Comments: 5 pages, 4 figures

3D multirater RCNN for multimodal multiclass detection and characterisation of extremely small objects

Authors: Carole H. Sudre, Beatriz Gomez Anson, Silvia Ingala, Chris D. Lane, Daniel Jimenez, Lukas Haider, Thomas Varsavsky, Lorna Smith, H. Rolf Jäger, M. Jorge Cardoso

Abstract: Extremely small objects (ESO) have become observable on clinical routine magnetic resonance imaging acquisitions, thanks to a reduction in acquisition time at higher resolution. Despite their small size (usually $<$10 voxels per object for an image of more than $10^6$ voxels), these markers reflect tissue damage and need to be accounted for to investigate the complete phenotype of complex patholog… ▽ More Extremely small objects (ESO) have become observable on clinical routine magnetic resonance imaging acquisitions, thanks to a reduction in acquisition time at higher resolution. Despite their small size (usually $<$10 voxels per object for an image of more than $10^6$ voxels), these markers reflect tissue damage and need to be accounted for to investigate the complete phenotype of complex pathological pathways. In addition to their very small size, variability in shape and appearance leads to high labelling variability across human raters, resulting in a very noisy gold standard. Such objects are notably present in the context of cerebral small vessel disease where enlarged perivascular spaces and lacunes, commonly observed in the ageing population, are thought to be associated with acceleration of cognitive decline and risk of dementia onset. In this work, we redesign the RCNN model to scale to 3D data, and to jointly detect and characterise these important markers of age-related neurovascular changes. We also propose training strategies enforcing the detection of extremely small objects, ensuring a tractable and stable training process. △ Less

Submitted 21 December, 2018; originally announced December 2018.

Irregular model sets and tame dynamics

Authors: Gabriel Fuhrmann, Eli Glasner, Tobias Jäger, Christian Oertel

Abstract: We study the dynamical properties of irregular model sets and show that the translation action on their hull always admits an infinite independence set. The dynamics can therefore not be tame and the topological sequence entropy is strictly positive. Extending the proof to a more general setting, we further obtain that tame implies regular for almost automorphic group actions on compact spaces. In… ▽ More We study the dynamical properties of irregular model sets and show that the translation action on their hull always admits an infinite independence set. The dynamics can therefore not be tame and the topological sequence entropy is strictly positive. Extending the proof to a more general setting, we further obtain that tame implies regular for almost automorphic group actions on compact spaces. In the converse direction, we show that even in the restrictive case of Euclidean cut and project schemes irregular model sets may be uniquely ergodic and have zero topological entropy. This provides negative answers to questions by Schlottmann and Moody in the Euclidean setting. △ Less

Submitted 15 November, 2018; originally announced November 2018.

Comments: 22 pages

MSC Class: 52C23; 37B50; 37B10

Stress controlled rheology of dense suspensions using transient flows

Authors: Endao Han, Nicole M. James, Heinrich M. Jaeger

Abstract: Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method… ▽ More Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method that overcomes this obstacle. Rapidly propagating shear fronts are generated and used to establish well-controlled local stress conditions that sweep across the material. Exploiting such transient flows, we are able to track how a dense suspension approaches its shear jammed state dynamically, and can quantitatively map out the onset stress for solidification in a state diagram. △ Less

Submitted 28 October, 2018; originally announced October 2018.

Comments: 12 pages, 12 figures

Journal ref: Phys. Rev. Lett. 123, 248002 (2019)

Dynamic jamming of dense suspensions under tilted impact

Authors: Endao Han, Liang Zhao, Nigel Van Ha, S. Tonia Hsieh, Daniel B. Szyld, Heinrich M. Jaeger

Abstract: Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficu… ▽ More Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficult because suspensions are optically opaque and the front can propagate as fast as several meters per second. Recently, high-speed ultrasound imaging has been used to overcome this problem and extract two-dimensional sections of the flow field associated with jamming front propagation. Here we extend this method to reconstruct the three-dimensional flow field. This enables us to investigate the evolution of jamming fronts for which axisymmetry cannot be assumed, such as impact at angles tilted away from the normal to the free surface of the suspension. We find that sufficiently far from solid boundaries the resulting flow field is approximately identical to that generated by normal impact, but rotated and aligned with the angle of impact. However, once the front approaches the solid boundary at the bottom of the container, it generates a squeeze flow that deforms the front profile and causes jamming to proceed in a non-axisymmetric manner. △ Less

Submitted 9 May, 2019; v1 submitted 25 October, 2018; originally announced October 2018.

Comments: 12 pages, 11 figures

Computing optimal discrete readout weights in reservoir computing is NP-hard

Authors: Fatemeh Hadaeghi, Herbert Jaeger

Abstract: We show NP-hardness of a generalized quadratic programming problem, which we called Unconstrained N-ary Quadratic Programming (UNQP). This problem has recently become practically relevant in the context of novel memristor-based neuromorphic microchip designs, where solving the UNQP is a key operation for on-chip training of the neural network implemented on the chip. UNQP is the problem of finding… ▽ More We show NP-hardness of a generalized quadratic programming problem, which we called Unconstrained N-ary Quadratic Programming (UNQP). This problem has recently become practically relevant in the context of novel memristor-based neuromorphic microchip designs, where solving the UNQP is a key operation for on-chip training of the neural network implemented on the chip. UNQP is the problem of finding a vector $\mathbf{v} \in S^N$ which minimizes $\mathbf{v}^T\,Q\,\mathbf{v} +\mathbf{v}^T \mathbf{c} $, where $S = \{s_1, \ldots, s_n\} \subset \mathbb{Z}$ is a given set of eligible parameters for $\mathbf{v}$, $Q \in \mathbb{Z}^{N \times N}$ is positive semi-definite, and $\mathbf{c} \in \mathbb{Z}^{N}$. In memristor-based neuromorphic hardware, $S$ is physically given by a finite (and small) number of possible memristor states. The proof of NP-hardness is by reduction from the Unconstrained Binary Quadratic Programming problem, which is a special case of UNQP where $S = \{0, 1\}$ and which is known to be NP-hard. △ Less

Submitted 4 September, 2018; originally announced September 2018.

Comments: 8 pages submitted to Neurocomputing

Journal ref: Neurocomputing Volume 338, 21 April 2019, Pages 233-236

Transforming mesoscale granular plasticity through particle shape

Authors: Kieran A. Murphy, Karin A. Dahmen, Heinrich M. Jaeger

Abstract: When an amorphous material is strained beyond the point of yielding it enters a state of continual reconfiguration via dissipative, avalanche-like slip events that relieve built-up local stress. However, how the statistics of such events depend on local interactions among the constituent units remains debated. To address this we perform experiments on granular material in which we use particle sha… ▽ More When an amorphous material is strained beyond the point of yielding it enters a state of continual reconfiguration via dissipative, avalanche-like slip events that relieve built-up local stress. However, how the statistics of such events depend on local interactions among the constituent units remains debated. To address this we perform experiments on granular material in which we use particle shape to vary the interactions systematically. Granular material, confined under constant pressure boundary conditions, is uniaxially compressed while stress is measured and internal rearrangements are imaged with x-rays. We introduce volatility, a quantity from economic theory, as a powerful new tool to quantify the magnitude of stress fluctuations, finding systematic, shape-dependent trends. For all 22 investigated shapes the magnitude $s$ of relaxation events is well-fit by a truncated power law distribution $P(s)\sim {s}^{-τ} exp(-s/s^*)$, as has been proposed within the context of plasticity models. The power law exponent $τ$ for all shapes tested clusters around $τ=$ 1.5, within experimental uncertainty covering the range 1.3 - 1.7. The shape independence of $τ$ and its compatibility with mean field models indicate that the granularity of the system, but not particle shape, modifies the stress redistribution after a slip event away from that of continuum elasticity. Meanwhile, the characteristic maximum event size $s^*$ changes by two orders of magnitude and tracks the shape dependence of volatility. Particle shape in granular materials is therefore a powerful new factor influencing the distance at which an amorphous system operates from scale-free criticality. These experimental results are not captured by current models and suggest a need to reexamine the mechanisms driving mesoscale plastic deformation in amorphous systems. △ Less

Submitted 21 December, 2018; v1 submitted 19 August, 2018; originally announced August 2018.

Comments: 11 pages, 8 figures. v3 adds a new appendix and figure about event rates and changes several parts the text

Journal ref: Phys. Rev. X 9, 011014 (2019)

Cluster formation via sonic depletion forces in levitated granular matter

Authors: Melody X. Lim, Anton Souslov, Vincenzo Vitelli, Heinrich M. Jaeger

Abstract: The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a… ▽ More The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a platform to experimentally probe the formation of nonequilibrium small structures in a controlled environment. We focus on the minimal models of cluster formation: six and seven millimetre-scale particles in two dimensions. Experiments and modelling reveal that, in contrast to thermal colloids, in non-equilibrium granular ensembles the magnitude of active fluctuations controls not only the assembly rates but also their assembly pathways and ground-state statistics. These results open up new possibilities for non-invasively manipulating macroscopic particles, tuning their interactions, and directing their assembly. △ Less

Submitted 11 August, 2018; originally announced August 2018.

Journal ref: Nature Physics (2019)

Conforming nanoparticle sheets to surfaces with Gaussian curvature

Authors: Noah P. Mitchell, Remington L. Carey, Jelani Hannah, Yifan Wang, Maria Cortes Ruiz, Sean P. McBride, Xiao-Min Lin, Heinrich M. Jaeger

Abstract: Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through loc… ▽ More Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through local particle rearrangement and plastic deformation. This means that, unlike thin sheets such as paper or graphene, nanoparticle sheets can much more easily conform to surfaces with complex topography characterized by non-zero Gaussian curvature, like spherical caps or saddles. Here, we investigate the limits of nanoparticle monolayers' ability to conform to substrates with Gaussian curvature by stamping nanoparticle sheets onto lattices of larger polystyrene spheres. Tuning the local Gaussian curvature by increasing the size of the substrate spheres, we find that the stamped sheet morphology evolves through three characteristic stages: from full substrate coverage, where the sheet extends over the interstices in the lattice, to coverage in the form of caps that conform tightly to the top portion of each sphere and fracture at larger polar angles, to caps that exhibit radial folds. Through analysis of the nanoparticle positions, obtained from scanning electron micrographs, we extract the local strain tensor and track the onset of strain-induced dislocations in the particle arrangement. By considering the interplay of energies for elastic and plastic deformations and adhesion, we construct arguments that capture the observed changes in sheet morphology as Gaussian curvature is tuned over two orders of magnitude. △ Less

Submitted 2 February, 2020; v1 submitted 10 August, 2018; originally announced August 2018.

Comments: 13 pages for main text + 5 pages for supplementary information

Journal ref: Soft Matter, 14, 9107-9117 (2018)

An Open Framework Enabling Electromagnetic Tracking in Image-Guided Interventions

Authors: Herman Alexander Jaeger, Stephen Hinds, Pádraig Cantillon-Murphy

Abstract: Electromagnetic tracking (EMT) is a core platform technology in the navigation and visualisation of image-guided procedures. The technology provides high tracking accuracy in non-line-of-sight environments, allowing instrument navigation in locations where optical tracking is not feasible. Integration of EMT in complex procedures, often coupled with multi-modal imaging, is on the rise, yet the lac… ▽ More Electromagnetic tracking (EMT) is a core platform technology in the navigation and visualisation of image-guided procedures. The technology provides high tracking accuracy in non-line-of-sight environments, allowing instrument navigation in locations where optical tracking is not feasible. Integration of EMT in complex procedures, often coupled with multi-modal imaging, is on the rise, yet the lack of exibility in the available hardware platforms has been noted by many researchers and system designers. Advances in the field of EMT include novel methods of improving tracking system accuracy, precision and error compensation capabilities, though such system-level improvements cannot be readily incorporated in current therapy applications due to the `blackbox' nature of commercial tracking solving algorithms. This paper defines a software framework to allow novel EMT designs and improvements become part of the global design process for image-guided interventions. In an effort to standardise EMT development, we define a generalised cross-platform software framework in terms of the four system functions common to all EMT systems; acquisition, filtering, modelling and solving. The interfaces between each software component are defined in terms of their input and output data structures. An exemplary framework is implemented in the Python programming language and demonstrated with the open-source Anser EMT system. Performance metrics are gathered from both Matlab and Python implementations of Anser EMT considering the host operating system, hardware configuration and acquisition settings used. Results show indicative system latencies of 5 ms can be achieved using the framework on a Windows operating system, with decreased system performance observed on UNIX-like platforms. △ Less

Submitted 29 July, 2018; originally announced July 2018.

Comments: 8 pages, Accepted to MICCAI 2018

VTrails: Inferring Vessels with Geodesic Connectivity Trees

Authors: Stefano Moriconi, Maria A. Zuluaga, H. Rolf Jäger, Parashkev Nachev, Sébastien Ourselin, M. Jorge Cardoso

Abstract: The analysis of vessel morphology and connectivity has an impact on a number of cardiovascular and neurovascular applications by providing patient-specific high-level quantitative features such as spatial location, direction and scale. In this paper we present an end-to-end approach to extract an acyclic vascular tree from angiographic data by solving a connectivity-enforcing anisotropic fast marc… ▽ More The analysis of vessel morphology and connectivity has an impact on a number of cardiovascular and neurovascular applications by providing patient-specific high-level quantitative features such as spatial location, direction and scale. In this paper we present an end-to-end approach to extract an acyclic vascular tree from angiographic data by solving a connectivity-enforcing anisotropic fast marching over a voxel-wise tensor field representing the orientation of the underlying vascular tree. The method is validated using synthetic and real vascular images. We compare VTrails against classical and state-of-the-art ridge detectors for tubular structures by assessing the connectedness of the vesselness map and inspecting the synthesized tensor field as proof of concept. VTrails performance is evaluated on images with different levels of degradation: we verify that the extracted vascular network is an acyclic graph (i.e. a tree), and we report the extraction accuracy, precision and recall. △ Less

Submitted 8 June, 2018; originally announced June 2018.

Journal ref: IPMI 2017: Information Processing in Medical Imaging pp 672-684

Evolutionary strategy for inverse charge measurements of dielectric particles

Authors: Xikai Jiang, Jiyuan Li, Victor Lee, Heinrich M. Jaeger, Olle G. Heinonen, Juan J. de Pablo

Abstract: We report a computational strategy to obtain the charges of individual dielectric particles from experimental observation of their interactions as a function of time. This strategy uses evolutionary optimization to minimize the difference between trajectories extracted from experiment and simulated trajectories based on many-particle force fields. The force fields include both Coulombic interactio… ▽ More We report a computational strategy to obtain the charges of individual dielectric particles from experimental observation of their interactions as a function of time. This strategy uses evolutionary optimization to minimize the difference between trajectories extracted from experiment and simulated trajectories based on many-particle force fields. The force fields include both Coulombic interactions and dielectric polarization effects that arise due to particle-particle charge mismatch and particle-environment dielectric contrast. The strategy was applied to systems of free falling charged granular particles in vacuum, where electrostatic interactions are the only driving forces that influence the particles' motion. We show that when the particles' initial positions and velocities are known, the optimizer requires only an initial and final particle configuration of a short trajectory in order to accurately infer the particles' charges; when the initial velocities are unknown and only the initial positions are given, the optimizer can learn from multiple frames along the trajectory to determine the particles' initial velocities and charges. While the results presented here offer a proof-of-concept demonstration of the proposed ideas, the proposed strategy could be extended to more complex systems of electrostatically charged granular matter. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Collisional Charging of Individual Sub-Millimeter Particles: Using Ultrasonic Levitation to Initiate and Track Charge Transfer

Authors: Victor Lee, Nicole M. James, Scott Waitukaitis, Heinrich M. Jaeger

Abstract: Electrostatic charging of insulating fine particles can be responsible for numerous phenomena ranging from lightning in volcanic plumes to dust explosions. However, even basic aspects of how fine particles become charged are still unclear. Studying particle charging is challenging because it usually involves the complexities associated with many particle collisions. To address these issues we intr… ▽ More Electrostatic charging of insulating fine particles can be responsible for numerous phenomena ranging from lightning in volcanic plumes to dust explosions. However, even basic aspects of how fine particles become charged are still unclear. Studying particle charging is challenging because it usually involves the complexities associated with many particle collisions. To address these issues we introduce a method based on acoustic levitation, which makes it possible to initiate sequences of repeated collisions of a single sub-millimeter particle with a flat plate, and to precisely measure the particle charge in-situ after each collision. We show that collisional charge transfer between insulators is dependent on the hydrophobicity of the contacting surfaces. We use glass, which we modify by attaching nonpolar molecules to the particle, the plate, or both. We find that hydrophilic surfaces develop significant positive charges after contacting hydrophobic surfaces. Moreover, we demonstrate that charging between a hydrophilic and a hydrophobic surface is suppressed in an acidic environment and enhanced in a basic one. Application of an electric field during each collision is found to modify the charge transfer, again depending on surface hydrophobicity. We discuss these results within the context of contact charging due to ion transfer and show that they lend strong support to OH- ions as the charge carriers. △ Less

Submitted 28 January, 2018; originally announced January 2018.

Comments: 24 pages, 6 figures

Journal ref: Phys. Rev. Materials 2, 035602 (2018)

On modeling and measuring viscoelasticity with dynamic Atomic Force Microscopy

Authors: Per-Anders Thorén, Riccardo Borgani, Daniel Forchheimer, Illia Dobryden, Per M. Claesson, Hailu G. Kassa, Philippe Leclère, Yifan Wang, Heinrich M. Jaeger, David B. Haviland

Abstract: The interaction between a rapidly oscillating atomic force microscope tip and a soft material surface is described using both elastic and viscous forces with a moving surface model. We derive the simplest form of this model, motivating it as a way to capture the impact dynamics of the tip and sample with an interaction consisting of two components: interfacial or surface force, and bulk or volumet… ▽ More The interaction between a rapidly oscillating atomic force microscope tip and a soft material surface is described using both elastic and viscous forces with a moving surface model. We derive the simplest form of this model, motivating it as a way to capture the impact dynamics of the tip and sample with an interaction consisting of two components: interfacial or surface force, and bulk or volumetric force. Analytic solutions to the piece-wise linear model identify characteristic time constants, providing a physical explanation of the hysteresis observed in the measured dynamic force quadrature curves. Numerical simulation is used to fit the model to experimental data and excellent agreement is found with a variety of different samples. The model parameters form a dimensionless impact-rheology factor, giving a quantitative physical number to characterize a viscoelastic surface that does not depend on the tip shape or cantilever frequency. △ Less

Submitted 21 May, 2018; v1 submitted 24 November, 2017; originally announced November 2017.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. Applied 10, 024017 (2018)

Monotonicity of maximal equicontinuous factors and an application to toral flows

Authors: Till Hauser, Tobias Jäger

Abstract: We show that for group actions on locally connected spaces the maximal equicontinuous factor map is always monotone, that is, the preimages of single points are connected. As an application, we obtain that if the maximal continuous factor of a homeomorphism of the two-torus is minimal, then it is either (i) an irrational translation of the two-torus, (ii) an irrational rotation on the circle or (i… ▽ More We show that for group actions on locally connected spaces the maximal equicontinuous factor map is always monotone, that is, the preimages of single points are connected. As an application, we obtain that if the maximal continuous factor of a homeomorphism of the two-torus is minimal, then it is either (i) an irrational translation of the two-torus, (ii) an irrational rotation on the circle or (iii) the identity on a singleton. △ Less

Submitted 15 November, 2017; originally announced November 2017.

Comments: 11 pages

Constitutive relations for shear fronts in shear-thickening suspensions

Authors: Endao Han, Matthieu Wyart, Ivo R. Peters, Heinrich M. Jaeger

Abstract: We study the fronts that appear when a shear-thickening suspension is submitted to a sudden driving force at a boundary. Using a quasi-one-dimensional experimental geometry, we extract the front shape and the propagation speed from the suspension flow field and map out their dependence on applied shear. We find that the relation between stress and velocity is quadratic, as is generally true for in… ▽ More We study the fronts that appear when a shear-thickening suspension is submitted to a sudden driving force at a boundary. Using a quasi-one-dimensional experimental geometry, we extract the front shape and the propagation speed from the suspension flow field and map out their dependence on applied shear. We find that the relation between stress and velocity is quadratic, as is generally true for inertial effects in liquids, but with a pre-factor that can be much larger than the material density. We show that these experimental findings can be explained by an extension of the Wyart-Cates model, which was originally developed to describe steady-state shear-thickening. This is achieved by introducing a sole additional parameter: the characteristic strain scale that controls the crossover from start-up response to steady-state behavior. The theoretical framework we obtain unifies both transient and steady-state properties of shear-thickening materials. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Comments: 17 pages, 13 figures

Journal ref: Phys. Rev. Fluids 3, 073301 (2018)

Auxetic metamaterials from disordered networks

Authors: Daniel R Reid, Nidhi Pashine, Justin M Wozniak, Heinrich M Jaeger, Andrea J Liu, Sidney R Nagel, Juan J de Pablo

Abstract: Recent theoretical work suggests that systematic pruning of disordered networks consisting of nodes connected by springs can lead to materials that exhibit a host of unusual mechanical properties. In particular, global properties such as the Poisson's ratio or local responses related to deformation can be precisely altered. Tunable mechanical responses would be useful in areas ranging from impact… ▽ More Recent theoretical work suggests that systematic pruning of disordered networks consisting of nodes connected by springs can lead to materials that exhibit a host of unusual mechanical properties. In particular, global properties such as the Poisson's ratio or local responses related to deformation can be precisely altered. Tunable mechanical responses would be useful in areas ranging from impact mitigation to robotics and, more generally, for creation of metamaterials with engineered properties. However, experimental attempts to create auxetic materials based on pruning-based theoretical ideas have not been successful. Here we introduce a new and more realistic model of the networks, which incorporates angle-bending forces and the appropriate experimental boundary conditions. A sequential pruning strategy of select bonds in this model is then devised and implemented that enables engineering of specific mechanical behaviors upon deformation, both in the linear and non-linear regimes. In particular, it is shown that the Poisson's ratio can be tuned to arbitrary values. The model and concepts discussed here are validated by preparing physical realizations of the networks designed in this manner, which are produced by laser cutting two-dimensional sheets and are found to behave as predicted. Furthermore, by relying on optimization algorithms, we exploit the networks' susceptibility to tuning to design networks that posses a distribution of stiffer and more compliant bonds, and whose auxetic behavior is even greater than that of homogeneous networks. Taken together, the findings reported here serve to establish that pruned networks represent a promising platform for the creation of novel mechanical metamaterials. △ Less

Submitted 2 October, 2017; originally announced October 2017.

Interparticle hydrogen bonding can elicit shear jamming in dense suspensions

Authors: Nicole James, Endao Han, Justin Jureller, Heinrich Jaeger

Abstract: Dense suspensions of hard particles in a liquid can exhibit strikingly counter-intuitive behavior, such as discontinuous shear thickening (DST) [1-8] and reversible shear jamming (SJ) into a state with finite yield stress [9-13]. Recent studies identified a stress-activated crossover from hydrodynamic interactions to frictional particle contacts to be key for these behaviors [2-4, 6-8, 10, 14]. Ho… ▽ More Dense suspensions of hard particles in a liquid can exhibit strikingly counter-intuitive behavior, such as discontinuous shear thickening (DST) [1-8] and reversible shear jamming (SJ) into a state with finite yield stress [9-13]. Recent studies identified a stress-activated crossover from hydrodynamic interactions to frictional particle contacts to be key for these behaviors [2-4, 6-8, 10, 14]. However, many suspensions exhibit only DST and not SJ. Here we show that particle surface chemistry can play a central role in creating conditions that allow for SJ. We find the system's ability to form interparticle hydrogen bonds when sheared into contact elicits SJ. We demonstrate this with charge-stabilized polymer microspheres and non-spherical cornstarch particles, controlling hydrogen bond formation with solvents. The propensity for SJ is quantified by tensile tests [13] and linked to an enhanced friction by atomic force microscopy. Our results extend the fundamental understanding of the SJ mechanism and open new avenues for designing strongly non-Newtonian fluids. △ Less

Submitted 28 July, 2017; originally announced July 2017.

Overcoming Catastrophic Interference by Conceptors

Authors: Xu He, Herbert Jaeger

Abstract: Catastrophic interference has been a major roadblock in the research of continual learning. Here we propose a variant of the back-propagation algorithm, "conceptor-aided back-prop" (CAB), in which gradients are shielded by conceptors against degradation of previously learned tasks. Conceptors have their origin in reservoir computing, where they have been previously shown to overcome catastrophic f… ▽ More Catastrophic interference has been a major roadblock in the research of continual learning. Here we propose a variant of the back-propagation algorithm, "conceptor-aided back-prop" (CAB), in which gradients are shielded by conceptors against degradation of previously learned tasks. Conceptors have their origin in reservoir computing, where they have been previously shown to overcome catastrophic forgetting. CAB extends these results to deep feedforward networks. On the disjoint MNIST task CAB outperforms two other methods for coping with catastrophic interference that have recently been proposed in the deep learning field. △ Less

Submitted 20 July, 2017; v1 submitted 16 July, 2017; originally announced July 2017.

Comments: 14 pages, 4 figures

Report number: Jacobs University Technical Report Nr 35

Set-oriented numerical computation of rotation sets

Authors: Katja Polotzek, Kathrin Padberg-Gehle, Tobias Jäger

Abstract: We establish a set-oriented algorithm for the numerical approximation of the rotation set of homeomorphisms of the two-torus homotopic to the identity. A theoretical background is given by the concept of ε-rotation sets. These are obtained by replacing orbits with ε-pseudo-orbits in the definition of the Misiurewicz-Ziemian rotation set and are shown to converge to the latter as ε decreases to zer… ▽ More We establish a set-oriented algorithm for the numerical approximation of the rotation set of homeomorphisms of the two-torus homotopic to the identity. A theoretical background is given by the concept of ε-rotation sets. These are obtained by replacing orbits with ε-pseudo-orbits in the definition of the Misiurewicz-Ziemian rotation set and are shown to converge to the latter as ε decreases to zero. Based on this result, we prove the convergence of the numerical approximations as precision and iteration time tend to infinity. Further, we provide analytic error estimates for the algorithm under an additional boundedness assumption, which is known to hold in many relevant cases and in particular for non-empty interior rotation sets. △ Less

Submitted 22 February, 2017; v1 submitted 20 February, 2017; originally announced February 2017.

Comments: Matlab codes will be made available on the authors homepages and/or are available upon request

MSC Class: 37E30; 37E45; 65P99

Model sets with positive entropy in Euclidean cut and project schemes

Authors: Tobias Jäger, Daniel Lenz, Christian Oertel

Abstract: We construct model sets arising from cut and project schemes in Euclidean spaces whose associated Delone dynamical systems have positive toplogical entropy. The construction works both with windows that are proper and with windows that have empty interior. In a probabilistic construction, the entropy almost surely turns out to be proportional to the measure of the boundary of the window. We construct model sets arising from cut and project schemes in Euclidean spaces whose associated Delone dynamical systems have positive toplogical entropy. The construction works both with windows that are proper and with windows that have empty interior. In a probabilistic construction, the entropy almost surely turns out to be proportional to the measure of the boundary of the window. △ Less

Submitted 25 June, 2018; v1 submitted 4 May, 2016; originally announced May 2016.

Comments: Revised version with a number of corrections and improvements. Most importantly, the constructions have been extended from one-dimensional examples to higher-dimensional ones. To appear in Ann. Sci. École Norm. Sup

MSC Class: 52C23; 37B50; 37B10

High-speed ultrasound imaging in dense suspensions reveals impact-activated solidification due to dynamic shear jamming

Authors: Endao Han, Ivo R. Peters, Heinrich M. Jaeger

Abstract: A remarkable property of dense suspensions is that they can transform from liquid-like at rest to solid-like under sudden impact. Previous work showed that this impact-induced solidification involves rapidly moving jamming fronts; however, details of this process have remained unresolved. Here we use high-speed ultrasound imaging to probe non-invasively how the interior of a dense suspension respo… ▽ More A remarkable property of dense suspensions is that they can transform from liquid-like at rest to solid-like under sudden impact. Previous work showed that this impact-induced solidification involves rapidly moving jamming fronts; however, details of this process have remained unresolved. Here we use high-speed ultrasound imaging to probe non-invasively how the interior of a dense suspension responds to impact. Measuring the speed of sound we demonstrate that the solidification proceeds without a detectable increase in packing fraction, and imaging the evolving flow field we find that the shear intensity is maximized right at the jamming front. Taken together, this provides direct experimental evidence for jamming by shear, rather than densification, as driving the transformation to solid-like behavior. Based on these findings we propose a new model to explain the anisotropy in the propagation speed of the fronts and delineate the onset conditions for dynamic shear jamming in suspensions. △ Less

Submitted 1 April, 2016; originally announced April 2016.

Comments: 9 pages, 3 figures

From splashing to bouncing: the influence of viscosity on the impact of suspension droplets on a solid surface

Authors: Martin H. Klein Schaarsberg, Ivo R. Peters, Menachem Stern, Kevin Dodge, Wendy W. Zhang, Heinrich M. Jaeger

Abstract: We experimentally investigated the splashing of dense suspension droplets impacting a solid surface, extending prior work to the regime where the viscosity of the suspending liquid becomes a significant parameter. The overall behavior can be described by a combination of two trends. The first one is that the splashing becomes favored when the kinetic energy of individual particles at the surface o… ▽ More We experimentally investigated the splashing of dense suspension droplets impacting a solid surface, extending prior work to the regime where the viscosity of the suspending liquid becomes a significant parameter. The overall behavior can be described by a combination of two trends. The first one is that the splashing becomes favored when the kinetic energy of individual particles at the surface of a droplet overcomes the confinement produced by surface tension. This is expressed by a particle-based Weber number $We_p$. The second is that splashing is suppressed by increasing the viscosity of the solvent. This is expressed by the Stokes number $St$, which influences the effective coefficient of restitution of colliding particles. We developed a phase diagram where the splashing onset is delineated as a function of both $We_p$ and $St$. A surprising result occurs at very small Stokes number, where not only splashing is suppressed but also plastic deformation of the droplet. This leads to a situation where droplets can bounce back after impact, an observation we are able to reproduce using discrete particle numerical simulations that take into account viscous interaction between particles and elastic energy. △ Less

Submitted 17 May, 2016; v1 submitted 10 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. E 93, 062609 (2016)

Dynamic shear jamming in dense granular suspensions under extension

Authors: Sayantan Majumdar, Ivo R. Peters, Endao Han, Heinrich M. Jaeger

Abstract: Unlike dry granular materials, a dense granular suspension like cornstarch in water can strongly resist extensional flows. At low extension rates, such a suspension behaves like a viscous liquid, but rapid extension results in a response where stresses far exceed the predictions of lubrication hydrodynamics and capillarity. To understand this remarkable mechanical response, we experimentally measu… ▽ More Unlike dry granular materials, a dense granular suspension like cornstarch in water can strongly resist extensional flows. At low extension rates, such a suspension behaves like a viscous liquid, but rapid extension results in a response where stresses far exceed the predictions of lubrication hydrodynamics and capillarity. To understand this remarkable mechanical response, we experimentally measure the normal force imparted by a large bulk of the suspension on a plate moving vertically upward at a controlled velocity. We observe that above a velocity threshold, the peak force increases by orders of magnitude. Using fast ultrasound imaging we map out the local velocity profiles inside the suspension which reveal the formation of a growing jammed region under rapid extension. This region interacts with the rigid boundaries of the container through strong velocity gradients, suggesting a direct connection to the recently proposed shear-jamming mechanism. △ Less

Submitted 9 December, 2016; v1 submitted 7 March, 2016; originally announced March 2016.

Comments: Accepted for publication in Phys. Rev. E

Journal ref: Phys. Rev. E 95, 012603 (2017)

Non-affine bending mode of thin cylindrical tubes

Authors: Efi Efrati, Yifan Wang, Heinrich M. Jaeger, Thomas A. Witten

Abstract: We discuss the response of thin cylindrical tubes to small indentations. The stretching-free embedding of these surfaces is completely determined by the embedding of one edge curve, thus reducing their bending response to an effectively one dimensional problem. We obtain that in general thin cylindrical tubes will bend non-uniformly in response to an indentation normal to their surface. As a conse… ▽ More We discuss the response of thin cylindrical tubes to small indentations. The stretching-free embedding of these surfaces is completely determined by the embedding of one edge curve, thus reducing their bending response to an effectively one dimensional problem. We obtain that in general thin cylindrical tubes will bend non-uniformly in response to an indentation normal to their surface. As a consequence, their local bending stiffness, as measured by indenting at various locations along their axis, is predicted to peak at the center and decrease by a universal factor of 4 at either end of the tube. This characteristic spatial profile of the bending stiffness variation allows a direct determination of the bending modulus of very thin tubes that are shorter than their pinch persistence length, $l_{p}\propto R^{3/2}/t^{1/2}$, where $R$ is the tube diameter and $t$ its wall thickness. We compare our results with experiments performed on rolled-up stainless steel sheets. △ Less

Submitted 6 March, 2016; originally announced March 2016.

Aleatory Architectures

Authors: Sean Keller, Heinrich Jaeger

Abstract: Aleatory architectures explore new approaches and concepts at the intersection of granular materials research and architecture/structural engineering. It explicitly includes stochastic (re-) configuration of individual structural elements and suggests that building materials and components can have their own agency - that they can be designed to adapt and to find their own responses to structural… ▽ More Aleatory architectures explore new approaches and concepts at the intersection of granular materials research and architecture/structural engineering. It explicitly includes stochastic (re-) configuration of individual structural elements and suggests that building materials and components can have their own agency - that they can be designed to adapt and to find their own responses to structural or spatial contexts. In this Guest Editorial we introduce some of the key ideas and ask: Can there be design by disorder? What are the possibilities of material agency? Can we develop a vocabulary of concepts to interpret various orderings of chance? Several papers in this special issue then investigate these questions in more detail from a range of different scientific and architectural perspectives. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Optimizing Packing Fraction in Granular Media Composed of Overlapping Spheres

Authors: Leah K. Roth, Heinrich M. Jaeger

Abstract: What particle shape will generate the highest packing fraction when randomly poured into a container? In order to explore and navigate the enormous search space efficiently, we pair molecular dynamics simulations with artificial evolution. Arbitrary particle shape is represented by a set of overlapping spheres of varying diameter, enabling us to approximate smooth surfaces with a resolution propor… ▽ More What particle shape will generate the highest packing fraction when randomly poured into a container? In order to explore and navigate the enormous search space efficiently, we pair molecular dynamics simulations with artificial evolution. Arbitrary particle shape is represented by a set of overlapping spheres of varying diameter, enabling us to approximate smooth surfaces with a resolution proportional to the number of spheres included. We discover a family of planar triangular particles, whose packing fraction of $φ\sim$ 0.73 outpaces almost all reported experimental results for random packings of frictionless particles. We investigate how $φ$ depends on the arrangement of spheres comprising an individual particle and on the smoothness of the surface. We validate the simulations with experiments using 3D-printed copies of the simplest member of the family, a planar particle consisting of three overlapping spheres with identical radius. Direct experimental comparison with 3D-printed aspherical ellipsoids demonstrates that the triangular particles pack exceedingly well not only in the limit of large system size but also when confined to small containers. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Comments: 7 pages, 7 figures

Freestanding loadbearing structures with Z-shaped particles

Authors: Kieran A. Murphy, Nikolaj Reiser, Darius Choksy, Clare E. Singer, Heinrich M. Jaeger

Abstract: Architectural structures such as masonry walls or columns exhibit a slender verticality, in contrast to the squat, sloped forms obtained with typical unconfined granular materials. Here we demonstrate the ability to create freestanding, weight-bearing, similarly slender and vertical structures by the simple pouring of suitably shaped dry particles into a mold that is subsequently removed. Combinin… ▽ More Architectural structures such as masonry walls or columns exhibit a slender verticality, in contrast to the squat, sloped forms obtained with typical unconfined granular materials. Here we demonstrate the ability to create freestanding, weight-bearing, similarly slender and vertical structures by the simple pouring of suitably shaped dry particles into a mold that is subsequently removed. Combining experiments and simulations we explore a family of particle types that can entangle through their non-convex, hooked shape. We show that Z-shaped particles produce granular aggregates which can either be fluid and pourable, or solid and rigid enough to maintain vertical interfaces and build freestanding columns of large aspect ratio (>10) that support compressive loads without external confinement. We investigate the stability of such columns with uniaxial compression, bending, and vibration tests and compare with other particle types including U-shaped particles and rods. We find a pronounced anisotropy in the internal stress propagation together with strong strain-stiffening, which stabilizes rather than destabilizes the structures under load. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Comments: 9 pages, 11 figures

Turning Statistical Physics Models Into Materials Design Engines

Authors: Marc Z. Miskin, Gurdaman S. Khaira, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: Despite the success statistical physics has enjoyed at predicting the properties of materials for given parameters, the inverse problem, identifying which material parameters produce given, desired properties, is only beginning to be addressed. Recently, several methods have emerged across disciplines that draw upon optimization and simulation to create computer programs that tailor material respo… ▽ More Despite the success statistical physics has enjoyed at predicting the properties of materials for given parameters, the inverse problem, identifying which material parameters produce given, desired properties, is only beginning to be addressed. Recently, several methods have emerged across disciplines that draw upon optimization and simulation to create computer programs that tailor material responses to specified behaviors. However, so far the methods developed either involve black-box techniques, in which the optimizer operates without explicit knowledge of the material's configuration space, or they require carefully tuned algorithms with applicability limited to a narrow subclass of materials. Here we introduce a formalism that can generate optimizers automatically by extending statistical mechanics into the realm of design. The strength of this new approach lies in its capability to transform statistical models that describe materials into optimizers to tailor them. By comparing against standard black-box optimization methods, we demonstrate how optimizers generated by this formalism can be faster and more effective, while remaining straightforward to implement. The scope of our approach includes new possibilities for solving a variety of complex optimization and design problems concerning materials both in and out of equilibrium. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Abundance of mode-locking for quasiperiodically forced circle maps

Authors: Jing Wang, Tobias Jäger

Abstract: We study the phenomenon of mode-locking in the context of quasiperiodically forced non-linear circle maps. As a main result, we show that under certain C1-open condition on the geometry of twist parameter families of such systems, the closure of the union of modelocking plateaus has positive measure. In particular, this implies the existence of infinitely many mode-locking plateaus (open Arnold to… ▽ More We study the phenomenon of mode-locking in the context of quasiperiodically forced non-linear circle maps. As a main result, we show that under certain C1-open condition on the geometry of twist parameter families of such systems, the closure of the union of modelocking plateaus has positive measure. In particular, this implies the existence of infinitely many mode-locking plateaus (open Arnold tongues). The proof builds on multiscale analysis and parameter exclusion methods in the spirit of Benedicks and Carleson, which were previously developed for quasiperiodic SL(2,R)-cocycles by Young and Bjerklöv. The methods apply to a variety of examples, including a forced version of the classical Arnold circle map. △ Less

Submitted 15 April, 2015; originally announced April 2015.

Comments: 29 pages, 9 figures

The ALMA Band 9 receiver - Design, construction, characterization, and first light

Authors: A. M. Baryshev, R. Hesper, F. P. Mena, T. M. Klapwijk, T. A. van Kempen, M. R. Hogerheijde, B. D. Jackson, J. Adema, G. J. Gerlofsma, M. E. Bekema, J. Barkhof, L. H. R. de Haan-Stijkel, M. van den Bemt, A. Koops, K. Keizer, C. Pieters, J. Koops van het Jagt, H. H. A. Schaeffer, T. Zijlstra, M. Kroug, C. F. J. Lodewijk, K. Wielinga, W. Boland, M. W. M. de Graauw, E. F. van Dishoeck , et al. (2 additional authors not shown)

Abstract: We describe the design, construction, and characterization of the Band 9 heterodyne receivers (600-720 GHz) for the Atacama Large Millimeter / submillimeter Array (ALMA). The ALMA Band 9 receiver units ("cartridges"), which are installed in the telescope's front end, have been designed to detect and down-convert two orthogonal linear polarization components of the light collected by the ALMA anten… ▽ More We describe the design, construction, and characterization of the Band 9 heterodyne receivers (600-720 GHz) for the Atacama Large Millimeter / submillimeter Array (ALMA). The ALMA Band 9 receiver units ("cartridges"), which are installed in the telescope's front end, have been designed to detect and down-convert two orthogonal linear polarization components of the light collected by the ALMA antennas. The light entering the front end is refocused with a compact arrangement of mirrors, which is fully contained within the cartridge. The arrangement contains a grid to separate the polarizations and two beam splitters to combine each resulting beam with a local oscillator signal. The combined beams are fed into independent double-sideband mixers, each with a corrugated feedhorn coupling the radiation by way of a waveguide with backshort cavity into an impedance-tuned SIS junction that performs the heterodyne down-conversion. Finally, the generated intermediate frequency signals are amplified by cryogenic and room-temperature HEMT amplifiers and exported to the telescope's back end for further processing and, finally, correlation. The receivers have been constructed and tested in the laboratory and they show excellent performance, complying with ALMA requirements. Performance statistics on all 73 Band 9 receivers are reported. On-sky characterization and tests of the performance of the Band 9 cartridges are presented using commissioning data. △ Less

Submitted 6 March, 2015; originally announced March 2015.

Journal ref: A&A 577, A129 (2015)

Irrational rotation factors for conservative torus homeomorphisms

Authors: T. Jäger, F. A. Tal

Abstract: We provide an equivalent characterisation for the existence of one-dimensional irrational rotation factors of conservative torus homeomorphisms that are not eventually annular. It states that an area-preserving non-annular torus homeomorphism $f$ is semiconjugate to an irrational rotation $R_α$ of the circle if and only if there exists a well-defined speed of rotation in some rational direction on… ▽ More We provide an equivalent characterisation for the existence of one-dimensional irrational rotation factors of conservative torus homeomorphisms that are not eventually annular. It states that an area-preserving non-annular torus homeomorphism $f$ is semiconjugate to an irrational rotation $R_α$ of the circle if and only if there exists a well-defined speed of rotation in some rational direction on the torus, and the deviations from the constant rotation in this direction are uniformly bounded. By means of a counterexample, we also demonstrate that a similar characterisation does not hold for eventually annular torus homeomorphisms. △ Less

Submitted 8 September, 2015; v1 submitted 14 October, 2014; originally announced October 2014.

Comments: Incorporates referee's corrections. To appear in Ergod. Th. & Dynam. Syst

MSC Class: 37E30; 37E45; 47A35

Rotation sets and almost periodic sequences

Authors: Tobias Jäger, Alejandro Passeggi, Sonja Štimac

Abstract: We study the rotational behaviour on minimal sets of torus homeomorphisms and show that the associated rotation sets can be any type of line segments as well as non-convex and even plane-separating continua. This shows that restrictions holding for rotation sets on the whole torus are not valid on minimal sets. The proof uses a construction of rotational horseshoes by Kwapisz to transfer the probl… ▽ More We study the rotational behaviour on minimal sets of torus homeomorphisms and show that the associated rotation sets can be any type of line segments as well as non-convex and even plane-separating continua. This shows that restrictions holding for rotation sets on the whole torus are not valid on minimal sets. The proof uses a construction of rotational horseshoes by Kwapisz to transfer the problem to a symbolic level, where the desired rotational behaviour is implemented by means of suitable irregular Toeplitz sequences. △ Less

Submitted 13 August, 2014; originally announced August 2014.

MSC Class: 37E30; 37E45; 54H20

X-ray tomography system to investigate granular materials during mechanical loading

Authors: Athanasios G Athanassiadis, Patrick J. La Rivière, Emil Sidky, Charles Pelizzari, Xiaochuan Pan, Heinrich M. Jaeger

Abstract: We integrate a small and portable medical x-ray device with mechanical testing equipment to enable in-situ, non-invasive measurements of a granular material's response to mechanical loading. We employ an orthopedic C-arm as the x-ray source and detector to image samples mounted in the materials tester. We discuss the design of a custom rotation stage, which allows for sample rotation and tomograph… ▽ More We integrate a small and portable medical x-ray device with mechanical testing equipment to enable in-situ, non-invasive measurements of a granular material's response to mechanical loading. We employ an orthopedic C-arm as the x-ray source and detector to image samples mounted in the materials tester. We discuss the design of a custom rotation stage, which allows for sample rotation and tomographic reconstruction under applied compressive stress. We then discuss the calibration of the system for 3d computed tomography, as well as the subsequent image reconstruction process. Using this system to reconstruct packings of 3d-printed particles, we resolve packing features with 0.52 mm resolution in a (60 mm)$^3$ field of view. By analyzing the performance bounds of the system, we demonstrate that the reconstructions exhibit only moderate noise. △ Less

Submitted 28 July, 2014; v1 submitted 10 June, 2014; originally announced June 2014.

Comments: 10 pages, 8 figures

Conceptors: an easy introduction

Authors: Herbert Jaeger

Abstract: Conceptors provide an elementary neuro-computational mechanism which sheds a fresh and unifying light on a diversity of cognitive phenomena. A number of demanding learning and processing tasks can be solved with unprecedented ease, robustness and accuracy. Some of these tasks were impossible to solve before. This entirely informal paper introduces the basic principles of conceptors and highlights… ▽ More Conceptors provide an elementary neuro-computational mechanism which sheds a fresh and unifying light on a diversity of cognitive phenomena. A number of demanding learning and processing tasks can be solved with unprecedented ease, robustness and accuracy. Some of these tasks were impossible to solve before. This entirely informal paper introduces the basic principles of conceptors and highlights some of their usages. △ Less

Submitted 10 June, 2014; originally announced June 2014.

Comments: 11 pages

Shear thickening of highly viscous granular suspensions

Authors: Qin Xu, Sayantan Majumdar, Eric Brown, Heinrich M. Jaeger

Abstract: We experimentally investigate shear thickening in dense granular suspensions under oscillatory shear. Directly imaging the suspension-air interface, we observe dilation beyond a critical strain $γ_c$ and the end of shear thickening as the maximum confining stress is reached and the contact line moves. Analyzing the shear profile, we extract the viscosity contributions due to hydrodynamics $η_μ$, d… ▽ More We experimentally investigate shear thickening in dense granular suspensions under oscillatory shear. Directly imaging the suspension-air interface, we observe dilation beyond a critical strain $γ_c$ and the end of shear thickening as the maximum confining stress is reached and the contact line moves. Analyzing the shear profile, we extract the viscosity contributions due to hydrodynamics $η_μ$, dilation $η_c$ and sedimentation $η_g$. While $η_g$ governs the shear thinning regime, $η_μ$ and $η_c$ together determine the shear thickening behavior. As the suspending liquid's viscosity varies from 10 to 1000 cst, $η_μ$ is found to compete with $η_c$ and soften the discontinuous nature of shear thickening. △ Less

Submitted 28 April, 2014; originally announced April 2014.

Quasi-2D dynamic jamming in cornstarch suspensions: visualization and force measurements

Authors: Ivo R. Peters, Heinrich M. Jaeger

Abstract: We report experiments investigating jamming fronts in a floating layer of cornstarch suspension. The suspension has a packing fraction close to jamming, which dynamically turns into a solid when impacted at a high speed. We show that the front propagates in both axial and transverse direction from the point of impact, with a constant ratio between the two directions of propagation of approximately… ▽ More We report experiments investigating jamming fronts in a floating layer of cornstarch suspension. The suspension has a packing fraction close to jamming, which dynamically turns into a solid when impacted at a high speed. We show that the front propagates in both axial and transverse direction from the point of impact, with a constant ratio between the two directions of propagation of approximately 2. Inside the jammed solid, we observe an additional compression, which results from the increasing stress as the solid grows. During the initial growth of the jammed solid, we measure a force response that can be completely accounted for by added mass. Only once the jamming front reaches a boundary, the added mass cannot account for the measured force anymore. We do not, however, immediately see a strong force response as we would expect when compressing a jammed packing. Instead, we observe a delay in the force response on the pusher, which corresponds to the time it takes for the system to develop a close to uniform velocity gradient that spans the complete system. △ Less

Submitted 3 December, 2014; v1 submitted 24 April, 2014; originally announced April 2014.

Comments: 7 pages, 7 figures

Journal ref: Soft Matter 10 (2014) 6564-6570

Evolving Design Rules for the Inverse Granular Packing Problem

Authors: Marc Z. Miskin, Heinrich M. Jaeger

Abstract: If a collection of identical particles is poured into a container, different shapes will fill to different densities. But what is the shape that fills a container as close as possible to a pre-specified, desired density? We demonstrate a solution to this inverse-packing problem by framing it in the context of artificial evolution. By representing shapes as bonded spheres, we show how shapes may be… ▽ More If a collection of identical particles is poured into a container, different shapes will fill to different densities. But what is the shape that fills a container as close as possible to a pre-specified, desired density? We demonstrate a solution to this inverse-packing problem by framing it in the context of artificial evolution. By representing shapes as bonded spheres, we show how shapes may be mutated, simulated, and selected to produce particularly dense or loose packing aggregates, both with and without friction. Moreover, we show how motifs emerge linking these shapes together. The result is a set of design rules that function as an effective solution to the inverse packing problem for given packing procedures and boundary conditions. Finally, we show that these results are verified by experiments on 3D-printed prototypes used to make packings in the real world. △ Less

Submitted 17 March, 2014; originally announced March 2014.

Comments: 13 pages, 5 figures

Controlling Recurrent Neural Networks by Conceptors

Authors: Herbert Jaeger

Abstract: The human brain is a dynamical system whose extremely complex sensor-driven neural processes give rise to conceptual, logical cognition. Understanding the interplay between nonlinear neural dynamics and concept-level cognition remains a major scientific challenge. Here I propose a mechanism of neurodynamical organization, called conceptors, which unites nonlinear dynamics with basic principles of… ▽ More The human brain is a dynamical system whose extremely complex sensor-driven neural processes give rise to conceptual, logical cognition. Understanding the interplay between nonlinear neural dynamics and concept-level cognition remains a major scientific challenge. Here I propose a mechanism of neurodynamical organization, called conceptors, which unites nonlinear dynamics with basic principles of conceptual abstraction and logic. It becomes possible to learn, store, abstract, focus, morph, generalize, de-noise and recognize a large number of dynamical patterns within a single neural system; novel patterns can be added without interfering with previously acquired ones; neural noise is automatically filtered. Conceptors help explaining how conceptual-level information processing emerges naturally and robustly in neural systems, and remove a number of roadblocks in the theory and applications of recurrent neural networks. △ Less

Submitted 17 November, 2024; v1 submitted 13 March, 2014; originally announced March 2014.

Comments: 200 pages, 50 figures

Report number: Jacobs University Technical Report Nr 31 ACM Class: I.2.6

Relative entropy minimizing noisy non-linear neural network to approximate stochastic processes

Authors: Mathieu N. Galtier, Camille Marini, Gilles Wainrib, Herbert Jaeger

Abstract: A method is provided for designing and training noise-driven recurrent neural networks as models of stochastic processes. The method unifies and generalizes two known separate modeling approaches, Echo State Networks (ESN) and Linear Inverse Modeling (LIM), under the common principle of relative entropy minimization. The power of the new method is demonstrated on a stochastic approximation of the… ▽ More A method is provided for designing and training noise-driven recurrent neural networks as models of stochastic processes. The method unifies and generalizes two known separate modeling approaches, Echo State Networks (ESN) and Linear Inverse Modeling (LIM), under the common principle of relative entropy minimization. The power of the new method is demonstrated on a stochastic approximation of the El Nino phenomenon studied in climate research. △ Less

Submitted 11 April, 2014; v1 submitted 7 February, 2014; originally announced February 2014.

Size-dependent same-material tribocharging in insulating grains

Authors: Scott R. Waitukaitis, Victor Lee, James M. Pierson, Steven L. Forman, Heinrich M. Jaeger

Abstract: Observations of flowing granular matter have suggested that same-material tribocharging de- pends on particle size, rendering large grains positive and small ones negative. Models assuming the transfer of trapped electrons can explain this, but so far have not been validated. Tracking individual grains in an electric field, we show quantitatively that charge is transferred based on size between ma… ▽ More Observations of flowing granular matter have suggested that same-material tribocharging de- pends on particle size, rendering large grains positive and small ones negative. Models assuming the transfer of trapped electrons can explain this, but so far have not been validated. Tracking individual grains in an electric field, we show quantitatively that charge is transferred based on size between materially identical grains. However, the surface density of trapped electrons, measured independently by thermoluminescence techniques, is orders of magnitude too small to account for the scale of charge transferred. This suggests that another negatively charged species, such as ions, is responsible. △ Less

Submitted 7 August, 2014; v1 submitted 10 September, 2013; originally announced September 2013.

Comments: 4.5 pages, 3 figures

Particle Shape Effects on the Stress Response of Granular Packings

Authors: Athanasios G. Athanassiadis, Marc Z. Miskin, Paul Kaplan, Nicholas Rodenberg, Seung Hwan Lee, Jason Merritt, Eric Brown, John Amend, Hod Lipson, Heinrich M. Jaeger

Abstract: We present measurements of the stress response of packings formed from a wide range of particle shapes. Besides spheres these include convex shapes such as the Platonic solids, truncated tetrahedra, and triangular bipyramids, as well as more complex, non-convex geometries such as hexapods with various arm lengths, dolos, and tetrahedral frames. All particles were 3D-printed in hard resin. Well-def… ▽ More We present measurements of the stress response of packings formed from a wide range of particle shapes. Besides spheres these include convex shapes such as the Platonic solids, truncated tetrahedra, and triangular bipyramids, as well as more complex, non-convex geometries such as hexapods with various arm lengths, dolos, and tetrahedral frames. All particles were 3D-printed in hard resin. Well-defined initial packing states were established through preconditioning by cyclic loading under given confinement pressure. Starting from such initial states, stress-strain relationships for axial compression were obtained at four different confining pressures for each particle type. While confining pressure has the largest overall effect on the mechanical response, we find that particle shape controls the details of the stress-strain curves and can be used to tune packing stiffness and yielding. By correlating the experimentally measured values for the effective Young's modulus under compression, yield stress and energy loss during cyclic loading, we identify trends among the various shapes that allow for designing a packing's aggregate behavior. △ Less

Submitted 15 October, 2013; v1 submitted 9 August, 2013; originally announced August 2013.

Comments: 13 pages, 9 figures, 3 tables; Accepted to Soft Matter

Optimizing directed self-assembled morphology

Authors: Jian Qin, Gurdaman S. Khaira, Yongrui Su, Grant P. Garner, Marc Miskin, Heinrich M. Jaeger, Juan J. de Pablo

Abstract: Directed assembly of block polymers is rapidly becoming a viable strategy for lithographic patterning of nanoscopic features. One of the key attributes of directed assembly is that an underlying chemical or topographic substrate pattern used to direct assembly need not exhibit a direct correspondence with the sought after block polymer morphology, and past work has largely relied on trial-and-erro… ▽ More Directed assembly of block polymers is rapidly becoming a viable strategy for lithographic patterning of nanoscopic features. One of the key attributes of directed assembly is that an underlying chemical or topographic substrate pattern used to direct assembly need not exhibit a direct correspondence with the sought after block polymer morphology, and past work has largely relied on trial-and-error approaches to design appropriate patterns. In this work, a computational evolutionary strategy is proposed to solve this optimization problem. By combining the Cahn-Hilliard equation, which is used to find the equilibrium morphology, and the covariance-matrix evolutionary strategy, which is used to optimize the combined outcome of particular substrate-copolymer combinations, we arrive at an efficient method for design of substrates leading to non-trivial, desirable outcomes. △ Less

Submitted 2 August, 2013; originally announced August 2013.

Comments: 9 pages, 8 figures

Impact dynamics of granular jets with non-circular cross-sections

Authors: Xiang Cheng, Leonardo Gordillo, Wendy W. Zhang, Heinrich M. Jaeger, Sidney R. Nagel

Abstract: Using high-speed photography, we investigate two distinct regimes of the impact dynamics of granular jets with non-circular cross-sections. In the steady-state regime, we observe the formation of thin granular sheets with anisotropic shapes and show that the degree of anisotropy increases with the aspect ratio of the jet's cross-section. Our results illustrate the liquid-like behavior of granular… ▽ More Using high-speed photography, we investigate two distinct regimes of the impact dynamics of granular jets with non-circular cross-sections. In the steady-state regime, we observe the formation of thin granular sheets with anisotropic shapes and show that the degree of anisotropy increases with the aspect ratio of the jet's cross-section. Our results illustrate the liquid-like behavior of granular materials during impact and demonstrate that a collective hydrodynamic flow emerges from strongly interacting discrete particles. We discuss the analogy between our experiments and those from the Relativistic Heavy Ion Collider (RHIC), where similar anisotropic ejecta from a quark-gluon plasma have been observed in heavy-ion impact. △ Less

Submitted 23 August, 2014; v1 submitted 25 July, 2013; originally announced July 2013.

Comments: 10 pages, 8 figures. PRE published

Journal ref: Phys. Rev. E. 89 (2014), 042201-9

Dense Suspension Splat: Monolayer Spreading and Hole Formation After Impact

Authors: Luuk A. Lubbers, Qin Xu, Sam Wilken, Wendy W. Zhang, Heinrich M. Jaeger

Abstract: We use experiments and minimal numerical models to investigate the rapidly expanding monolayer formed by the impact of a dense suspension drop against a smooth solid surface. The expansion creates a lace-like pattern of particle clusters separated by particle-free regions. Both the expansion and the development of the spatial inhomogeneity are dominated by particle inertia, therefore robust and in… ▽ More We use experiments and minimal numerical models to investigate the rapidly expanding monolayer formed by the impact of a dense suspension drop against a smooth solid surface. The expansion creates a lace-like pattern of particle clusters separated by particle-free regions. Both the expansion and the development of the spatial inhomogeneity are dominated by particle inertia, therefore robust and insensitive to details of the surface wetting, capillarity and viscous drag. △ Less

Submitted 6 February, 2014; v1 submitted 4 July, 2013; originally announced July 2013.

Comments: 4 pages (5 with references), and a total of 4 figures

Journal ref: Phys. Rev. Lett. 113, 044502 (2014)

Comparison of the Mechanical Properties of Self-Assembled Langmuir Monolayers of Nanoparticles and Phospholipids

Authors: Siheng Sean You, Rossen Rashkov, Pongsakorn Kanjanaboos, Ignacio Calderon, Mati Meron, Heinrich Jaeger, Binhua Lin

Abstract: Nanoparticles with hydrophobic capping ligands and amphiphilic phospholipids are both found to self-assemble into monolayer films when deposited on the air water interface. By separately measuring the anisotropic stress response of these films under uniaxial compression, we obtain both the 2D compressive and shear moduli of a range of different thin nanoparticle and phospholipid films. The compres… ▽ More Nanoparticles with hydrophobic capping ligands and amphiphilic phospholipids are both found to self-assemble into monolayer films when deposited on the air water interface. By separately measuring the anisotropic stress response of these films under uniaxial compression, we obtain both the 2D compressive and shear moduli of a range of different thin nanoparticle and phospholipid films. The compressive moduli of both nanoparticle and lipid films in the solid phase are on the same order of magnitude, whereas the shear moduli of the lipid films are found to be significantly lower. Additionally the moduli of the nanoparticle films depended substantially on the polydispersity of the constituent particles: broader size distribution lowered the stiffness of the nanoparticle film. △ Less

Submitted 3 July, 2013; originally announced July 2013.

Comments: 23 pages, 9 Figures

Shear thickening in concentrated suspensions: phenomenology, mechanisms, and relations to jamming

Authors: Eric Brown, Heinrich M. Jaeger

Abstract: Shear thickening is a type of non-Newtonian behavior in which the stress required to shear a fluid increases faster than linearly with shear rate. Many concentrated suspensions of particles exhibit an especially dramatic version, known as Discontinuous Shear Thickening (DST), in which the stress suddenly jumps with increasing shear rate and produces solid-like behavior. The best known example of s… ▽ More Shear thickening is a type of non-Newtonian behavior in which the stress required to shear a fluid increases faster than linearly with shear rate. Many concentrated suspensions of particles exhibit an especially dramatic version, known as Discontinuous Shear Thickening (DST), in which the stress suddenly jumps with increasing shear rate and produces solid-like behavior. The best known example of such counter-intuitive response to applied stresses occurs in mixtures of cornstarch in water. Over the last several years, this shear-induced solid-like behavior together with a variety of other unusual fluid phenomena has generated considerable interest in the physics of densely packed suspensions. In this review, we discuss the common physical properties of systems exhibiting shear thickening, and different mechanisms and models proposed to describe it. We then suggest how these mechanisms may be related and generalized, and propose a general phase diagram for shear thickening systems. We also discuss how recent work has related the physics of shear thickening to that of granular materials and jammed systems. Since DST is described by models that require only simple generic interactions between particles, we outline the broader context of other concentrated many-particle systems such as foams and emulsions, and explain why DST is restricted to the parameter regime of hard-particle suspensions. Finally, we discuss some of the outstanding problems and emerging opportunities. △ Less

Submitted 1 July, 2013; originally announced July 2013.

Comments: 24 pages, 12 figures, submitted to Reviews on Progress in Physics

Splashing onset in dense suspension droplets

Authors: Ivo R. Peters, Qin Xu, Heinrich M. Jaeger

Abstract: We investigate the impact of droplets of dense suspensions onto a solid substrate. We show that a global hydrodynamic balance is unable to predict the splash onset and propose to replace it by an energy balance at the level of the particles in the suspension. We experimentally verify that the resulting, particle-based Weber number gives a reliable, particle size and density dependent splash onset… ▽ More We investigate the impact of droplets of dense suspensions onto a solid substrate. We show that a global hydrodynamic balance is unable to predict the splash onset and propose to replace it by an energy balance at the level of the particles in the suspension. We experimentally verify that the resulting, particle-based Weber number gives a reliable, particle size and density dependent splash onset criterion. We further show that the same argument also explains why in bimodal systems smaller particles are more likely to escape than larger ones. △ Less

Submitted 10 June, 2013; v1 submitted 1 March, 2013; originally announced March 2013.

A construction of almost automorphic minimal sets

Authors: Roman Hric, Tobias Jäger

Abstract: We describe a general procedure to construct topological extensions of given skew product maps with one-dimensional fibres, by blowing up a countable number of single points to vertical segments. This allows to produce various examples of unusual dynamics, including almost automorphic minimal sets of almost periodically forced systems, point-distal but non-distal homeomorpisms of the torus (as fir… ▽ More We describe a general procedure to construct topological extensions of given skew product maps with one-dimensional fibres, by blowing up a countable number of single points to vertical segments. This allows to produce various examples of unusual dynamics, including almost automorphic minimal sets of almost periodically forced systems, point-distal but non-distal homeomorpisms of the torus (as first constructed by Rees) or minimal sets of quasiperiodically forced interval maps which are not filled-in. △ Less

Submitted 13 February, 2013; originally announced February 2013.

Comments: 16 pages, 4 figures

MSC Class: Primary 54H20; 37A05; 37E30. Primary 54H20; 37A05; 37E30

Impact Dynamics of Oxidized Liquid Metal Drops

Authors: Qin Xu, Eric Brown, Heinrich M. Jaeger

Abstract: With exposure to air, many liquid metals spontaneously generate an oxide layer on their surface. In oscillatory rheological tests, this skin is found to introduce a yield stress that typically dominates the elastic response but can be tuned by exposing the metal to hydrochloric acid solutions of different concentration. We systematically studied the normal impact of eutectic gallium-indium (eGaIn)… ▽ More With exposure to air, many liquid metals spontaneously generate an oxide layer on their surface. In oscillatory rheological tests, this skin is found to introduce a yield stress that typically dominates the elastic response but can be tuned by exposing the metal to hydrochloric acid solutions of different concentration. We systematically studied the normal impact of eutectic gallium-indium (eGaIn) drops under different oxidation conditions and show how this leads to two different dynamical regimes. At low impact velocity (or low Weber number), eGaIn droplets display strong recoil and rebound from the impacted surface when the oxide layer is removed. In addition, the degree of drop deformation or spreading during the impact is controlled by the oxide skin. We show that the scaling law known from ordinary liquids for the maximum spreading radius as a function of impact velocity can still be applied to the case of oxidized eGaIn if an effective Weber number $We^{\star}$ is employed that uses an effective surface tension factoring in the yield stress. In contrast, no influence on spreading from different oxidations conditions is observed for high impact velocity. This suggests that the initial kinetic energy is mostly damped by bulk viscous dissipation. Results from both regimes can be collapsed in an impact phase diagram controlled by two variables, the maximum spreading factor $P_m = R_0/R_m$, given by the ratio of initial to maximum drop radius, and the impact number $K = We^{\star}/Re^{4/5}$, which scales with the effective Weber number $We^{\star}$ as well as the Reynolds number $Re$. The data exhibit a transition from capillary to viscous behavior at a critical impact number $K_c \sim 0.1$. △ Less

Submitted 4 February, 2013; originally announced February 2013.