Showing 1–50 of 152 results for author: Jäger, H

Non-reciprocity and multibody interactions in acoustically levitated particle systems: A three body problem

Authors: Brady Wu, Qinghao Mao, Bryan VanSaders, Heinrich M. Jaeger

Abstract: In active fluids and active solids the constituents individually generate movement by each extracting energy from their environment or from their own source. Non-reciprocal interactions among these active constituents then enable novel collective behavior that often can be strikingly counterintuitive. However, non-reciprocity in these cases typically requires that the interacting bodies have diffe… ▽ More In active fluids and active solids the constituents individually generate movement by each extracting energy from their environment or from their own source. Non-reciprocal interactions among these active constituents then enable novel collective behavior that often can be strikingly counterintuitive. However, non-reciprocity in these cases typically requires that the interacting bodies have different physical properties or it needs to be programmed explicitly into all pairwise interactions. Here we show that collective activity in a driven system can emerge spontaneously through multibody nonreciprocal forces, even if all bodies are individually non-active and have identical properties. We demonstrate this with as few as three identical spheres, acoustically levitated in air, which exhibit collective activity as they interact through non-pairwise forces: similar to the classic gravitational three-body problem, the interaction between two spheres depends sensitively on the relative position of the third sphere. Non-reciprocity arises naturally from both near-field sound scattering and microstreaming forces among the spheres. The underdamped dynamics in air furthermore make it possible to go beyond collective center-of-mass propulsion or rotation and observe internal, engine-like reconfigurations that follow limit cycles. These findings open up new possibilities for self-assembly, where now multibody interactions not only determine the resulting structure but also drive the spontaneously emerging dynamics. △ Less

Submitted 15 March, 2025; originally announced March 2025.

Dense suspensions as trainable rheological metafluids

Authors: Hojin Kim, Samantha M. Livermore, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: Memory-forming properties introduce a new paradigm to the design of adaptive materials. In dense suspensions, an adaptive response is enabled by non-Newtonian rheology; however, typical suspensions have little memory, which implies rapid cessation of any adapted behavior. Here we show how multiple adaptive responses can be achieved by designing suspensions where different stress levels trigger dif… ▽ More Memory-forming properties introduce a new paradigm to the design of adaptive materials. In dense suspensions, an adaptive response is enabled by non-Newtonian rheology; however, typical suspensions have little memory, which implies rapid cessation of any adapted behavior. Here we show how multiple adaptive responses can be achieved by designing suspensions where different stress levels trigger different memories. This is enabled by the interplay of interactions based on frictional contact and dynamic chemical bridging. These two interactions lead to novel rheology with several well-delineated shear thinning and thickening regimes, which enable stress-activated memories associated with opposite time-dependent trends. As a result, in response to different stress levels, the suspension can evolve by either softening or stiffening and is trainable, exhibiting targeted viscosity and energy dissipation with repeated low-velocity impact. Such behavior, usually associated with mechanical metamaterials, suggests that dense suspensions with multiple memories can be viewed as trainable rheological metafluids. △ Less

Submitted 12 March, 2025; originally announced March 2025.

Generalizable automated ischaemic stroke lesion segmentation with vision transformers

Authors: Chris Foulon, Robert Gray, James K. Ruffle, Jonathan Best, Tianbo Xu, Henry Watkins, Jane Rondina, Guilherme Pombo, Dominic Giles, Paul Wright, Marcela Ovando-Tellez, H. Rolf Jäger, Jorge Cardoso, Sebastien Ourselin, Geraint Rees, Parashkev Nachev

Abstract: Ischaemic stroke, a leading cause of death and disability, critically relies on neuroimaging for characterising the anatomical pattern of injury. Diffusion-weighted imaging (DWI) provides the highest expressivity in ischemic stroke but poses substantial challenges for automated lesion segmentation: susceptibility artefacts, morphological heterogeneity, age-related comorbidities, time-dependent sig… ▽ More Ischaemic stroke, a leading cause of death and disability, critically relies on neuroimaging for characterising the anatomical pattern of injury. Diffusion-weighted imaging (DWI) provides the highest expressivity in ischemic stroke but poses substantial challenges for automated lesion segmentation: susceptibility artefacts, morphological heterogeneity, age-related comorbidities, time-dependent signal dynamics, instrumental variability, and limited labelled data. Current U-Net-based models therefore underperform, a problem accentuated by inadequate evaluation metrics that focus on mean performance, neglecting anatomical, subpopulation, and acquisition-dependent variability. Here, we present a high-performance DWI lesion segmentation tool addressing these challenges through optimized vision transformer-based architectures, integration of 3563 annotated lesions from multi-site data, and algorithmic enhancements, achieving state-of-the-art results. We further propose a novel evaluative framework assessing model fidelity, equity (across demographics and lesion subtypes), anatomical precision, and robustness to instrumental variability, promoting clinical and research utility. This work advances stroke imaging by reconciling model expressivity with domain-specific challenges and redefining performance benchmarks to prioritize equity and generalizability, critical for personalized medicine and mechanistic research. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Comments: 29 pages, 7 figures, 2 tables, 1 supplementary table, 2 supplementary figures

On the addition of micron-size intruders in a shear-thickening suspension of nanoparticles

Authors: Alice Pelosse, Heinrich M. Jaeger

Abstract: This study investigates the rheological behavior of shear-thickening suspensions made of different types of nanoparticles upon the addition of large intruders referred to as granules. The size ratio ranges from 20 to 120. We examine the effects of granule size, volume fraction, and surface properties on shear-thickening characteristics. Starting with a fumed silica suspension exhibiting discontinu… ▽ More This study investigates the rheological behavior of shear-thickening suspensions made of different types of nanoparticles upon the addition of large intruders referred to as granules. The size ratio ranges from 20 to 120. We examine the effects of granule size, volume fraction, and surface properties on shear-thickening characteristics. Starting with a fumed silica suspension exhibiting discontinuous shear thickening (DST) without granules, the addition of granules at different volume fractions, shifts the onset of thickening to lower shear rates. Concomitantly, the strength of the thickening, quantified by the thickening index, decreases, transitioning from DST to continuous shear thickening (CST). Comparison with suspensions of nanosilica spheres reveals a similar trend, suggesting generality across different systems. However, these results contrast with cornstarch-based suspensions, where granule addition enhances thickening. This difference is attributed to the large size ratio studied here: When the granules are much larger than the particles in the interstitial suspension, the granules introduce a spread in the local shear rate and disrupt the particles' ability to form an extended fabric of force chains. The findings highlight the critical role of particle size ratio in determining the rheology of complex suspensions, paving the way for tailoring material properties in industrial and scientific applications. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Tunable mechanical properties and air-based lubrication in an acoustically levitated granular material

Authors: Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger

Abstract: Cohesive granular materials are found in many natural and industrial environments, but experimental platforms for exploring the innate mechanical properties of these materials are often limited by the difficulty of adjusting cohesion strength. Granular particles levitated in an acoustic cavity form a model system to address this. Such particles self-assemble into free-floating, quasi-two-dimension… ▽ More Cohesive granular materials are found in many natural and industrial environments, but experimental platforms for exploring the innate mechanical properties of these materials are often limited by the difficulty of adjusting cohesion strength. Granular particles levitated in an acoustic cavity form a model system to address this. Such particles self-assemble into free-floating, quasi-two-dimensional raft structures which are held together by acoustic scattering forces; the strength of this attraction can be changed simply by modifying the sound field. We investigate the mechanical properties of acoustically bound granular rafts using substrate-free micro-scale shear tests. We first demonstrate deformation of rafts of spheres and the dependence of this deformation on acoustic pressure. We then apply these methods to rafts composed of anisotropic sand grains and smaller spheres, in which the smaller spheres have a thin layer of air separating them from other grain surfaces. These spheres act as soft, effectively frictionless particles that populate the interstices between the larger grains, which enables us to investigate the effect of lubricating the mixture in the presence of large-grain cohesion. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Comments: This preprint has not undergone peer review or any post-submission improvements or corrections. A version of this article has been accepted for publication in Granular Matter. This will be updated with a link to the Version of Record once the article has been published

Shear thickening inside elastic open-cell foams under dynamic compression

Authors: Samantha M. Livermore, Alice Pelosse, Michael van der Naald, Hojin Kim, Séverine Atis, Heinrich M. Jaeger

Abstract: We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of the composite material indicates the existence of shear rate gradients in the interstitial suspension caused by wide distributions in pore sizes in the disordere… ▽ More We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of the composite material indicates the existence of shear rate gradients in the interstitial suspension caused by wide distributions in pore sizes in the disordered foam network. The energy dissipated during compression scales with an effective internal shear rate, allowing for the collapse of three data sets for different pore-size foams. When scaled by this effective shear rate, the most pronounced energy increase coincides with the effective shear rate corresponding to the onset of shear thickening in our bulk suspension. Optical measurements of the radial deformation of the foam network and of the suspension flow under compression provide additional insight into the interaction between shear thickening fluid and foam. This optical data, combined with a simple model of a spring submerged in viscous flow, illustrates the dynamic interaction of viscous drag with foam elasticity as a function of compression rate, and identifies the foam pore size distribution as a critically important model parameter. Taken together, the stress measurements, dissipated energy, and relative motion of the fluid and the foam can be rationalized by knowing the pore size distribution and the average pore size of the foam. △ Less

Submitted 3 October, 2024; originally announced October 2024.

Multivariate mean equicontinuity for finite-to-one topomorphic extensions

Authors: Jonas Breitenbücher, Lino Haupt, Tobias Jäger

Abstract: In this note, we generalise the concept of topo-isomorphic extensions and define finite topomorphic extensions as topological dynamical systems whose factor map to the maximal equicontinuous factor is measure-theoretically at most $m$-to-one for some $m\in\mathbb{N}$. We further define multivariate versions of mean equicontinuity, complementing the notion of multivariate mean sensitivity introduce… ▽ More In this note, we generalise the concept of topo-isomorphic extensions and define finite topomorphic extensions as topological dynamical systems whose factor map to the maximal equicontinuous factor is measure-theoretically at most $m$-to-one for some $m\in\mathbb{N}$. We further define multivariate versions of mean equicontinuity, complementing the notion of multivariate mean sensitivity introduced by Li, Ye and Yu, and then show that any $m$-to-one topomorphic extension is mean $(m+1)$-equicontinuous. This falls in line with the well-known result, due to Downarowicz and Glasner, that strictly ergodic systems are isomorphic extensions if and only if they are mean equicontinuous. While in the multivariate case we can only conjecture that the converse direction also holds, the result provides an indication that multivariate equicontinuity properties are strongly related to finite extension structures. For minimal systems, an Auslander-Yorke type dichotomy between multivariate mean equicontinuity and sensitivity is shown as well. △ Less

Submitted 13 September, 2024; originally announced September 2024.

MSC Class: 37B02; 37B05; 37A05

Strain stiffening due to stretching of entangled particles in random packings of granular materials

Authors: Eric Brown, Kevin A. Mitchell, Alice Nasto, Athanasios Athanassiadis, Heinrich M. Jaeger

Abstract: Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling cluste… ▽ More Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling clusters of entangled chains. The number of entanglements is nearly proportional to the area surrounded by entangling particles with an excluded volume effect. A tendency was found for chain links to stretch when the packing was strained. The slope of the stress-strain relation of the packing can be calculated from a mean-field model consisting of the product of the effective extensional modulus of the chain, packing fraction, probability of stretched links, and the ratio of strain of stretched links to packing strain. The stress-strain model requires as input measurements of the ratio between local particle deformation and global average strain, and the probability of stretching for non-rigid particles. This results in a quadratic prediction for the stress-strain curve, with a curvature that agrees with experiments within the model uncertainties. This model explains that the strength of these packings comes from stretching of the links of chains, but only when the system-filling network of entanglements provides constraints that prevents failure by shear banding, so that particles must be deformed to move further under strain. In this model, the increasing slope of the stress-strain curve is mainly due to the fraction of stretched links increasing with strain. This model for the stress-strain relation is shown to be generalizable to different shapes of entangling particles by applying it to staples. △ Less

Submitted 11 February, 2025; v1 submitted 16 August, 2024; originally announced August 2024.

Comments: 22 pages, 24 figures, published in Physical Review E

Journal ref: Physical Review E 111, 025408 (2025)

Direct measurement of forces in air-based acoustic levitation systems

Authors: Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger

Abstract: Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces).… ▽ More Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces). Current experimental techniques for obtaining these force fields are not well-suited for mapping the primary force field at high spatial resolution and cannot directly measure the secondary scattering force. Here we introduce a method that can measure both acoustic forces in situ, including secondary forces in the near-field limit between arbitrarily shaped, closely spaced objects. Operating similarly to an atomic force microscope, the method inserts into the acoustic cavity a suitably shaped probe tip at the end of a long, flexible cantilever and optically detects its deflection. This makes it possible to measure forces with a resolution better than 50 nN, and also to apply stress or strain in a controlled manner to manipulate levitated objects. We demonstrate this by extracting the acoustic potential present in a levitation cavity, directly measuring the acoustic scattering force between two objects, and applying tension to a levitated granular raft of acoustically-bound particles in order to obtain the force-displacement curve for its deformation. △ Less

Submitted 9 August, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: The following article has been accepted for publication in Review of Scientific Instruments

Cell seeding dynamics in a porous scaffold material designed for meniscus tissue regeneration

Authors: Henry Jäger, Élise Grosjean, Steffen Plunder, Claudia Redenbach, Alex Keilmann, Bernd Simeon, Christina Surulescu

Abstract: We study the dynamics of a seeding experiment where a fibrous scaffold material is colonized by two types of cell populations. The specific application that we have in mind is related to the idea of meniscus tissue regeneration. In order to support the development of a promising replacement material, we discuss certain rate equations for the densities of human mesenchymal stem cells and chondrocyt… ▽ More We study the dynamics of a seeding experiment where a fibrous scaffold material is colonized by two types of cell populations. The specific application that we have in mind is related to the idea of meniscus tissue regeneration. In order to support the development of a promising replacement material, we discuss certain rate equations for the densities of human mesenchymal stem cells and chondrocytes and for the production of collagen-containing extracellular matrix. For qualitative studies, we start with a system of ordinary differential equations and refine then the model to include spatial effects of the underlying nonwoven scaffold structure. Numerical experiments as well as a complete set of parameters for future benchmarking are provided. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Comments: 6 pages, 5 figures, 1 table

Shear thickening in suspensions of particles with dynamic brush layers

Authors: Hojin Kim, Michael van der Naald, Finn A. Braaten, Thomas A. Witten, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: Control of frictional interactions among liquid-suspended particles has led to tunable, strikingly non-Newtonian rheology via the formation of strong flow constraints as particles come into close proximity under shear. Typically, these frictional interactions have been in the form of physical contact, controllable via particle shape and surface roughness. We investigate a different route, where mo… ▽ More Control of frictional interactions among liquid-suspended particles has led to tunable, strikingly non-Newtonian rheology via the formation of strong flow constraints as particles come into close proximity under shear. Typically, these frictional interactions have been in the form of physical contact, controllable via particle shape and surface roughness. We investigate a different route, where molecular bridging between nearby particle surfaces generates a controllable "sticky" friction. This is achieved with surface-functionalized colloidal particles capable of forming dynamic covalent bonds with telechelic polymers that comprise the suspending fluid. At low shear stress this results in particles coated with a uniform polymer brush layer. Beyond an onset stress the telechelic polymers become capable of bridging and generate shear thickening. Over the size range investigated, we find that the dynamic brush layer leads to dependence of the onset stress on particle diameter that closely follows a power law with exponent -1.76. In the shear thickening regime, we observe an enhanced dilation in measurements of the first normal stress difference and reduction in the extrapolated volume fraction required for jamming, both consistent with an effective particle friction that increases with decreasing particle diameter. These results are discussed in light of predictions for suspensions of hard spheres and of polymer-grafted particles. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Training physical matter to matter

Authors: Heinrich M. Jaeger, Arvind Murugan, Sidney R. Nagel

Abstract: Biological systems offer a great many examples of how sophisticated, highly adapted behavior can emerge from training. Here we discuss how training might be used to impart similarly adaptive properties in physical matter. As a special form of materials processing, training differs in important ways from standard approaches of obtaining sought after material properties. In particular, rather than d… ▽ More Biological systems offer a great many examples of how sophisticated, highly adapted behavior can emerge from training. Here we discuss how training might be used to impart similarly adaptive properties in physical matter. As a special form of materials processing, training differs in important ways from standard approaches of obtaining sought after material properties. In particular, rather than designing or programming the local configurations and interactions of constituents, training uses externally applied stimuli to evolve material properties. This makes it possible to obtain different functionalities from the same starting material (pluripotency). Furthermore, training evolves a material in-situ or under conditions similar to those during the intended use; thus, material performance can improve rather than degrade over time. We discuss requirements for trainability, outline recently developed training strategies for creating soft materials with multiple, targeted and adaptable functionalities, and provide examples where the concept of training has been applied to materials on length scales from the molecular to the macroscopic. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 1 figure, 60 references

An in-silico approach to meniscus tissue regeneration: Modeling, numerical simulation, and experimental analysis

Authors: Elise Grosjean, Alex Keilmann, Henry Jäger, Shimi Mohanan, Claudia Redenbach, Bernd Simeon, Christina Surulescu, Luisa de Roy, Andreas Seitz, Graciosa Teixeira, Martin Dauner, Carsten Linti, Günter Schmidt

Abstract: We develop a model the dynamics of human mesenchymal stem cells (hMSCs) and chondrocytes evolving in a nonwoven polyethylene terephtalate (PET) scaffold impregnated with hyaluron and supplied with a differentiation medium. The scaffold and the cells are assumed to be contained in a bioreactor with fluid perfusion. The differentiation of hMSCs into chondrocytes favors the production of extracellula… ▽ More We develop a model the dynamics of human mesenchymal stem cells (hMSCs) and chondrocytes evolving in a nonwoven polyethylene terephtalate (PET) scaffold impregnated with hyaluron and supplied with a differentiation medium. The scaffold and the cells are assumed to be contained in a bioreactor with fluid perfusion. The differentiation of hMSCs into chondrocytes favors the production of extracellular matrix (ECM) and is influenced by fluid stress. The model takes deformations of ECM and PET scaffold into account. The scaffold structure is explicitly included by statistical assessment of the fibre distribution from CT images. The effective macroscopic equations are obtained by appropriate upscaling from dynamics on lower (microscopic and mesoscopic) scales and feature in the motility terms an explicit cell diffusion tensor encoding the assessed anisotropic scaffold structure. Numerical simulations show its influence on the overall cell and tissue dynamics. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Acoustic manipulation of multi-body structures and dynamics

Authors: Melody X. Lim, Bryan VanSaders, Heinrich M. Jaeger

Abstract: Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less… ▽ More Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less explored and have been emerging as a frontier for research. We introduce the basic mechanisms giving rise to sound-mediated interactions among rigid as well as deformable particles, focusing on the regime where the particles' size and spacing are much smaller than the sound wavelength. The interplay of secondary acoustic scattering, Bjerknes forces, and micro-streaming is discussed and the role of particle shape is highlighted. Furthermore, we present recent advances in characterizing non-conservative and non-pairwise additive contributions to the particle interactions, along with instabilities and active fluctuations. These excitations emerge at sufficiently strong sound energy density and can act as an effective temperature in otherwise athermal systems. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Construction of smooth isomorphic and finite-to-one extensions of irrational rotations which are not almost automorphic

Authors: Lino Haupt, Tobias Jäger

Abstract: Due to a result by Glasner and Downarowicz, it is known that a minimal system is mean equicontinuous if and only if it is an isomorphic extension of its maximal equicontinuous factor. The majority of known examples of this type are almost automorphic, that is, the factor map to the maximal equicontinuous factor is almost one-to-one. The only cases of isomorphic extensions which are not almost auto… ▽ More Due to a result by Glasner and Downarowicz, it is known that a minimal system is mean equicontinuous if and only if it is an isomorphic extension of its maximal equicontinuous factor. The majority of known examples of this type are almost automorphic, that is, the factor map to the maximal equicontinuous factor is almost one-to-one. The only cases of isomorphic extensions which are not almost automorphic are again due to Glasner and Downarowicz, who in the same article provide a construction of such systems in a rather general topological setting. Here, we use the Anosov-Katok method in order to provide an alternative route to such examples and to show that these may be realised as smooth skew product diffeomorphisms of the two-torus with an irrational rotation on the base. Moreover - and more importantly - a modification of the construction allows to ensure that lifts of these diffeomorphism to finite covering spaces provide novel examples of finite-to-one topomorphic extensions of irrational rotations. These are still strictly ergodic and share the same dynamical eigenvalues as the original system, but show an additional singular continuous component of the dynamical spectrum. △ Less

Submitted 7 December, 2023; originally announced December 2023.

MSC Class: 37B05; 37C05

Journal ref: Ergod. Th. Dynam. Sys. 45 (2025) 1224-1245

Rheology of bidisperse non-Brownian suspensions

Authors: Abhinendra Singh, Christopher Ness, Abhishek K. Sharma, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: We study the rheology of bidisperse non-Brownian suspensions using particle-based simulation, mapping the viscosity as a function of the size ratio of the species, their relative abundance, and the overall solid content. The variation of the viscosity with applied stress exhibits shear thickening phenomenology irrespective of composition, though the stress-dependent limiting solids fraction govern… ▽ More We study the rheology of bidisperse non-Brownian suspensions using particle-based simulation, mapping the viscosity as a function of the size ratio of the species, their relative abundance, and the overall solid content. The variation of the viscosity with applied stress exhibits shear thickening phenomenology irrespective of composition, though the stress-dependent limiting solids fraction governing the viscosity and its divergence point are non-monotonic in the mixing ratio. Contact force data demonstrate an asymmetric exchange in dominant stress contribution from large-large to small-small particle contacts as the mixing ratio of the species evolves. Combining a prior model for shear thickening with one for composition-dependent jamming, we obtain a full description of the rheology of bidisperse non-Brownian suspensions capable of predicting effects such as the viscosity reduction observed upon adding small particle fines to a suspension of large particles. △ Less

Submitted 31 May, 2024; v1 submitted 9 November, 2023; originally announced November 2023.

Comments: 5 pages, 4 figures

Time-Variant Overlap-Add in Partitions

Authors: Hagen Jaeger, Uwe Simmer, Jörg Bitzer, Matthias Blau

Abstract: Virtual and augmented realities are increasingly popular tools in many domains such as architecture, production, training and education, (psycho)therapy, gaming, and others. For a convincing rendering of sound in virtual and augmented environments, audio signals must be convolved in real-time with impulse responses that change from one moment in time to another. Key requirements for the implementa… ▽ More Virtual and augmented realities are increasingly popular tools in many domains such as architecture, production, training and education, (psycho)therapy, gaming, and others. For a convincing rendering of sound in virtual and augmented environments, audio signals must be convolved in real-time with impulse responses that change from one moment in time to another. Key requirements for the implementation of such time-variant real-time convolution algorithms are short latencies, moderate computational cost and memory footprint, and no perceptible switching artifacts. In this engineering report, we introduce a partitioned convolution algorithm that is able to quickly switch between impulse responses without introducing perceptible artifacts, while maintaining a constant computational load and low memory usage. Implementations in several popular programming languages are freely available via GitHub. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Toward a formal theory for computing machines made out of whatever physics offers: extended version

Authors: Herbert Jaeger, Beatriz Noheda, Wilfred G. van der Wiel

Abstract: Approaching limitations of digital computing technologies have spurred research in neuromorphic and other unconventional approaches to computing. Here we argue that if we want to systematically engineer computing systems that are based on unconventional physical effects, we need guidance from a formal theory that is different from the symbolic-algorithmic theory of today's computer science textboo… ▽ More Approaching limitations of digital computing technologies have spurred research in neuromorphic and other unconventional approaches to computing. Here we argue that if we want to systematically engineer computing systems that are based on unconventional physical effects, we need guidance from a formal theory that is different from the symbolic-algorithmic theory of today's computer science textbooks. We propose a general strategy for developing such a theory, and within that general view, a specific approach that we call "fluent computing". In contrast to Turing, who modeled computing processes from a top-down perspective as symbolic reasoning, we adopt the scientific paradigm of physics and model physical computing systems bottom-up by formalizing what can ultimately be measured in any physical substrate. This leads to an understanding of computing as the structuring of processes, while classical models of computing systems describe the processing of structures. △ Less

Submitted 16 August, 2023; v1 submitted 28 July, 2023; originally announced July 2023.

Comments: 76 pages. This is an extended version of a perspective article with the same title that appeared in Nature Communications on August 16, 2023

ACM Class: F.0

Unsupervised 3D out-of-distribution detection with latent diffusion models

Authors: Mark S. Graham, Walter Hugo Lopez Pinaya, Paul Wright, Petru-Daniel Tudosiu, Yee H. Mah, James T. Teo, H. Rolf Jäger, David Werring, Parashkev Nachev, Sebastien Ourselin, M. Jorge Cardoso

Abstract: Methods for out-of-distribution (OOD) detection that scale to 3D data are crucial components of any real-world clinical deep learning system. Classic denoising diffusion probabilistic models (DDPMs) have been recently proposed as a robust way to perform reconstruction-based OOD detection on 2D datasets, but do not trivially scale to 3D data. In this work, we propose to use Latent Diffusion Models… ▽ More Methods for out-of-distribution (OOD) detection that scale to 3D data are crucial components of any real-world clinical deep learning system. Classic denoising diffusion probabilistic models (DDPMs) have been recently proposed as a robust way to perform reconstruction-based OOD detection on 2D datasets, but do not trivially scale to 3D data. In this work, we propose to use Latent Diffusion Models (LDMs), which enable the scaling of DDPMs to high-resolution 3D medical data. We validate the proposed approach on near- and far-OOD datasets and compare it to a recently proposed, 3D-enabled approach using Latent Transformer Models (LTMs). Not only does the proposed LDM-based approach achieve statistically significant better performance, it also shows less sensitivity to the underlying latent representation, more favourable memory scaling, and produces better spatial anomaly maps. Code is available at https://github.com/marksgraham/ddpm-ood △ Less

Submitted 7 July, 2023; originally announced July 2023.

Comments: Accepted at MICCAI 2023

Effects of reduced gravity on the granular fluid-solid transition: underexplored forces can dominate soft matter behaviors

Authors: Paul Sánchez, Karen E. Daniels, Heinrich Jaeger, Troy Shinbrot

Abstract: Granular media are soft matter systems that exhibit some of the extreme behavior of complex fluids. Understanding of the natural formation of planetary bodies, landing on and exploring them, future engineering of structures beyond Earth and planetary defense all hinge on the ability to predict the complex mechanical behavior of granular matter. As we understand them, these behaviors are linked to… ▽ More Granular media are soft matter systems that exhibit some of the extreme behavior of complex fluids. Understanding of the natural formation of planetary bodies, landing on and exploring them, future engineering of structures beyond Earth and planetary defense all hinge on the ability to predict the complex mechanical behavior of granular matter. As we understand them, these behaviors are linked to the granular fluid to solid transition. In this white paper, we describe issues that emerge for granular systems under reduced gravity and their implications for basic science and space exploration. (Topical White Paper submitted to the NASA Biological and Physical Sciences in Space Decadal Survey 2023-2032) △ Less

Submitted 7 July, 2023; originally announced July 2023.

Comments: arXiv admin note: text overlap with arXiv:1002.2478

A self-organizing robotic aggregate using solid and liquid-like collective states

Authors: Baudouin Saintyves, Matthew Spenko, Heinrich M. Jaeger

Abstract: Designing robotic systems that can change their physical form factor as well as their compliance to adapt to environmental constraints remains a major conceptual and technical challenge. To address this, we introduce the Granulobot, a modular system that blurs the distinction between soft, modular, and swarm robotics. The system consists of gear-like units that each contain a single actuator such… ▽ More Designing robotic systems that can change their physical form factor as well as their compliance to adapt to environmental constraints remains a major conceptual and technical challenge. To address this, we introduce the Granulobot, a modular system that blurs the distinction between soft, modular, and swarm robotics. The system consists of gear-like units that each contain a single actuator such that units can self-assemble into larger, granular aggregates using magnetic coupling. These aggregates can reconfigure dynamically and also split up into subsystems that might later recombine. Aggregates can self-organize into collective states with solid- and liquid-like properties, thus displaying widely differing compliances. These states can be perturbed locally via actuators or externally via mechanical feedback from the environment to produce adaptive shape shifting in a decentralized manner. This in turn can generate locomotion strategies adapted to different conditions. Aggregates can move over obstacles without using external sensors or coordinate to maintain a steady gait over different surfaces without electronic communication among units. The modular design highlights a physical, morphological form of control that advances the development of resilient robotic systems with the ability to morph and adapt to different functions and conditions. △ Less

Submitted 28 August, 2023; v1 submitted 6 April, 2023; originally announced April 2023.

Comments: 42 pages, 8 figures

Individualized prescriptive inference in ischaemic stroke

Authors: Dominic Giles, Robert Gray, Chris Foulon, Guilherme Pombo, James K. Ruffle, Tianbo Xu, H. Rolf Jäger, Jorge Cardoso, Sebastien Ourselin, Geraint Rees, Ashwani Jha, Parashkev Nachev

Abstract: The gold standard in the treatment of ischaemic stroke is set by evidence from randomized controlled trials, based on simple descriptions of presumptively homogeneous populations. Yet the manifest complexity of the brain's functional, connective, and vascular architectures introduces heterogeneities that violate the underlying statistical premisses, potentially leading to substantial errors at bot… ▽ More The gold standard in the treatment of ischaemic stroke is set by evidence from randomized controlled trials, based on simple descriptions of presumptively homogeneous populations. Yet the manifest complexity of the brain's functional, connective, and vascular architectures introduces heterogeneities that violate the underlying statistical premisses, potentially leading to substantial errors at both individual and population levels. The counterfactual nature of interventional inference renders quantifying the impact of this defect difficult. Here we conduct a comprehensive series of semi-synthetic, biologically plausible, virtual interventional trials across 100M+ distinct simulations. We generate empirically grounded virtual trial data from large-scale meta-analytic connective, functional, genetic expression, and receptor distribution data, with high-resolution maps of 4K+ acute ischaemic lesions. Within each trial, we estimate treatment effects using models varying in complexity, in the presence of increasingly confounded outcomes and noisy treatment responses. Individualized prescriptions inferred from simple models, fitted to unconfounded data, were less accurate than those from complex models, fitted to confounded data. Our results indicate that complex modelling with richly represented lesion data is critical to individualized prescriptive inference in ischaemic stroke. △ Less

Submitted 26 November, 2024; v1 submitted 25 January, 2023; originally announced January 2023.

Comments: 131 pages

Timescales: the choreography of classical and unconventional computing

Authors: Herbert Jaeger, Francky Catthoor

Abstract: Tasks that one wishes to have done by a computer often come with conditions that relate to timescales. For instance, the processing must terminate within a given time limit; or a signal processing computer must integrate input information across several timescales; or a robot motor controller must react to sensor signals with a short latency. For classical digital computing machines such requireme… ▽ More Tasks that one wishes to have done by a computer often come with conditions that relate to timescales. For instance, the processing must terminate within a given time limit; or a signal processing computer must integrate input information across several timescales; or a robot motor controller must react to sensor signals with a short latency. For classical digital computing machines such requirements pose no fundamental problems as long as the physical clock rate is fast enough for the fastest relevant timescales. However, when digital microchips become scaled down into the few-nanometer range where quantum noise and device mismatch become unavoidable, or when the digital computing paradigm is altogether abandoned in analog neuromorphic systems or other unconventional hardware bases, it can become difficult to relate timescale conditions to the physical hardware dynamics. Here we explore the relations between task-defined timescale conditions and physical hardware timescales in some depth. The article has two main parts. In the first part we develop an abstract model of a generic computational system that admits a unified discussion of computational timescales. This model is general enough to cover digital computing systems as well as analog neuromorphic or other unconventional ones. We identify four major types of timescales which require separate considerations: causal physical timescales; timescales of phenomenal change which characterize the ``speed'' of how something changes in time; timescales of reactivity which describe how fast a computing system can react to incoming trigger information; and memory timescales. In the second part we survey twenty known computational mechanisms that can be used to obtain desired task-related timescale characteristics from the physical givens of the available hardware. △ Less

Submitted 18 January, 2023; v1 submitted 2 January, 2023; originally announced January 2023.

Comments: 81 pages

ACM Class: F.0

Hydrodynamic Coupling Melts Acoustically Levitated Crystalline Rafts

Authors: Brady Wu, Bryan VanSaders, Melody X. Lim, Heinrich M. Jaeger

Abstract: The acoustic levitation of small particles provides a versatile platform to investigate the collective dynamical properties of self-assembled many-body systems in the presence of hydrodynamic coupling. However, acoustic scattering forces can only generate attractive interactions at close range in the levitation plane, limiting self-assembly to rafts where particles come into direct, dissipative, c… ▽ More The acoustic levitation of small particles provides a versatile platform to investigate the collective dynamical properties of self-assembled many-body systems in the presence of hydrodynamic coupling. However, acoustic scattering forces can only generate attractive interactions at close range in the levitation plane, limiting self-assembly to rafts where particles come into direct, dissipative, contact. Here, we overcome this limitation by using particles small enough that the viscosity of air establishes a repulsive streaming flow at close range. By tuning the size of particles relative to the characteristic length scale of the viscous flow, we control the interplay between attractive and repulsive forces. In this novel granular raft, particles form an open lattice with tunable spacing. Hydrodynamic coupling between particles gives rise to spontaneous excitations in the lattice, in turn driving intermittent particle rearrangements. Under the action of these fluctuations, the raft transitions from a predominantly quiescent, crystalline structure, to a two-dimensional liquid-like state. We show that this transition is characterized by dynamic heterogeneity and intermittency, as well as cooperative particle movements, that produce an effectively `cageless' crystal. These findings shed light on fluid-coupling driven excitations that are difficult to isolate and control in many other hydrodynamic systems. △ Less

Submitted 4 November, 2022; originally announced November 2022.

On the probability of positive finite-time Lyapunov exponents on strange non-chaotic attractors

Authors: Flavia Remo, Gabriel Fuhrmann, Tobias Jäger

Abstract: We study strange non-chaotic attractors in a class of quasiperiodically forced monotone interval maps known as pinched skew products. We prove that the probability of positive time-N Lyapunov exponents, with respect to the unique physical measure on the attractor, decays exponentially as N goes to infinity. The motivation for this work comes from the study of finite-time Lyapunov exponents as poss… ▽ More We study strange non-chaotic attractors in a class of quasiperiodically forced monotone interval maps known as pinched skew products. We prove that the probability of positive time-N Lyapunov exponents, with respect to the unique physical measure on the attractor, decays exponentially as N goes to infinity. The motivation for this work comes from the study of finite-time Lyapunov exponents as possible early-warning signals of critical transitions in the context of forced dynamics. △ Less

Submitted 12 November, 2022; v1 submitted 27 October, 2022; originally announced October 2022.

MSC Class: 37C60; 37G35

Where is VALDO? VAscular Lesions Detection and segmentatiOn challenge at MICCAI 2021

Authors: Carole H. Sudre, Kimberlin Van Wijnen, Florian Dubost, Hieab Adams, David Atkinson, Frederik Barkhof, Mahlet A. Birhanu, Esther E. Bron, Robin Camarasa, Nish Chaturvedi, Yuan Chen, Zihao Chen, Shuai Chen, Qi Dou, Tavia Evans, Ivan Ezhov, Haojun Gao, Marta Girones Sanguesa, Juan Domingo Gispert, Beatriz Gomez Anson, Alun D. Hughes, M. Arfan Ikram, Silvia Ingala, H. Rolf Jaeger, Florian Kofler , et al. (24 additional authors not shown)

Abstract: Imaging markers of cerebral small vessel disease provide valuable information on brain health, but their manual assessment is time-consuming and hampered by substantial intra- and interrater variability. Automated rating may benefit biomedical research, as well as clinical assessment, but diagnostic reliability of existing algorithms is unknown. Here, we present the results of the \textit{VAscular… ▽ More Imaging markers of cerebral small vessel disease provide valuable information on brain health, but their manual assessment is time-consuming and hampered by substantial intra- and interrater variability. Automated rating may benefit biomedical research, as well as clinical assessment, but diagnostic reliability of existing algorithms is unknown. Here, we present the results of the \textit{VAscular Lesions DetectiOn and Segmentation} (\textit{Where is VALDO?}) challenge that was run as a satellite event at the international conference on Medical Image Computing and Computer Aided Intervention (MICCAI) 2021. This challenge aimed to promote the development of methods for automated detection and segmentation of small and sparse imaging markers of cerebral small vessel disease, namely enlarged perivascular spaces (EPVS) (Task 1), cerebral microbleeds (Task 2) and lacunes of presumed vascular origin (Task 3) while leveraging weak and noisy labels. Overall, 12 teams participated in the challenge proposing solutions for one or more tasks (4 for Task 1 - EPVS, 9 for Task 2 - Microbleeds and 6 for Task 3 - Lacunes). Multi-cohort data was used in both training and evaluation. Results showed a large variability in performance both across teams and across tasks, with promising results notably for Task 1 - EPVS and Task 2 - Microbleeds and not practically useful results yet for Task 3 - Lacunes. It also highlighted the performance inconsistency across cases that may deter use at an individual level, while still proving useful at a population level. △ Less

Submitted 15 August, 2022; originally announced August 2022.

Acoustically levitated lock and key grains

Authors: Melody X. Lim, Heinrich M. Jaeger

Abstract: We present a scheme for generating shape-dependent, specific bonds between millimeter scale particles, using acoustic levitation. We levitate particles in an ultrasonic standing wave, allowing for substrate-free assembly. Secondary scattering generates shape-dependent attractive forces between particles, while driving the acoustic trap above its resonance frequency produces active fluctuations tha… ▽ More We present a scheme for generating shape-dependent, specific bonds between millimeter scale particles, using acoustic levitation. We levitate particles in an ultrasonic standing wave, allowing for substrate-free assembly. Secondary scattering generates shape-dependent attractive forces between particles, while driving the acoustic trap above its resonance frequency produces active fluctuations that mimic an effective temperature. We 3D print planar particles, and show that the local curvature of their binding sites controls the selectivity for attaching a matching particle. We find that the bound-state probability and bound-state lifetime can be independently tuned via the binding site depth and height respectively. Finally, we show that these principles can be used to design particles that assemble into complex structures. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Transformer-based out-of-distribution detection for clinically safe segmentation

Authors: Mark S Graham, Petru-Daniel Tudosiu, Paul Wright, Walter Hugo Lopez Pinaya, U Jean-Marie, Yee Mah, James Teo, Rolf H Jäger, David Werring, Parashkev Nachev, Sebastien Ourselin, M Jorge Cardoso

Abstract: In a clinical setting it is essential that deployed image processing systems are robust to the full range of inputs they might encounter and, in particular, do not make confidently wrong predictions. The most popular approach to safe processing is to train networks that can provide a measure of their uncertainty, but these tend to fail for inputs that are far outside the training data distribution… ▽ More In a clinical setting it is essential that deployed image processing systems are robust to the full range of inputs they might encounter and, in particular, do not make confidently wrong predictions. The most popular approach to safe processing is to train networks that can provide a measure of their uncertainty, but these tend to fail for inputs that are far outside the training data distribution. Recently, generative modelling approaches have been proposed as an alternative; these can quantify the likelihood of a data sample explicitly, filtering out any out-of-distribution (OOD) samples before further processing is performed. In this work, we focus on image segmentation and evaluate several approaches to network uncertainty in the far-OOD and near-OOD cases for the task of segmenting haemorrhages in head CTs. We find all of these approaches are unsuitable for safe segmentation as they provide confidently wrong predictions when operating OOD. We propose performing full 3D OOD detection using a VQ-GAN to provide a compressed latent representation of the image and a transformer to estimate the data likelihood. Our approach successfully identifies images in both the far- and near-OOD cases. We find a strong relationship between image likelihood and the quality of a model's segmentation, making this approach viable for filtering images unsuitable for segmentation. To our knowledge, this is the first time transformers have been applied to perform OOD detection on 3D image data. Code is available at github.com/marksgraham/transformer-ood. △ Less

Submitted 17 May, 2023; v1 submitted 21 May, 2022; originally announced May 2022.

Comments: Accepted at MIDL 2022 (Oral)

Designing Stress-Adaptive Dense Suspensions using Dynamic Covalent Chemistry

Authors: Grayson L. Jackson, Joseph M. Dennis, Neil D. Dolinski, Michael van der Naald, Hojin Kim, Christopher Eom, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks l… ▽ More The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (Keq) of the polymeric solvent to the particle interface. It is demonstrated that low Keq leads to shear thinning while high Keq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in Keq increases the polymer graft density at the particle surface and that antithixotropy primar-ily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programable time dependence. These studies open the door to energy absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but can switch between these two modalities on demand. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Comments: 9 pages, 5 figures (Supporting: 26 pages, 17 figures)

Journal ref: Macromolecules 2022

Stress-activated Constraints in Dense Suspension Rheology

Authors: Abhinendra Singh, Grayson L. Jackson, Michael van der Naald, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: Dispersing small particles in a liquid can produce surprising behaviors when the solids fraction becomes large: rapid shearing drives these systems out of equilibrium and can lead to dramatic increases in viscosity (shear-thickening) or even solidification (shear jamming). These phenomena occur above a characteristic onset stress when particles are forced into frictional contact. Here we show via… ▽ More Dispersing small particles in a liquid can produce surprising behaviors when the solids fraction becomes large: rapid shearing drives these systems out of equilibrium and can lead to dramatic increases in viscosity (shear-thickening) or even solidification (shear jamming). These phenomena occur above a characteristic onset stress when particles are forced into frictional contact. Here we show via simulations how this can be understood within a framework that abstracts details of the forces acting at particle-particle contacts into general stress-activated constraints on relative particle movement. We find that focusing on just two constraints, affecting sliding and rolling at contact, can reproduce the experimentally observed shear thickening behavior quantitatively, despite widely different particle properties, surface chemistries, and suspending fluids. Within this framework parameters such as coefficients of sliding and rolling friction can each be viewed as a proxy for one or more forces of different physical or chemical origin, while the parameter magnitudes indicate the relative importance of the associated constraint. In this way, a new link is established that connects features observable in macroscale rheological measurements to classes of constraints arising from micro- or nano-scale properties. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Comments: 7 Pages, 4 Figures

Mechanical properties of acoustically levitated granular rafts

Authors: Melody X. Lim, Bryan VanSaders, Anton Souslov, Heinrich M. Jaeger

Abstract: We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochasti… ▽ More We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochastic forces and torques that impart angular momentum to levitated objects. As the angular momentum of a quasi-two-dimensional granular raft is increased, the raft deforms from a disk to an ellipse, eventually pinching off into multiple separate rafts, in a mechanism that resembles the break-up of a liquid drop. We extract the raft effective surface tension and elastic modulus, and show that non-pairwise acoustic forces give rise to effective elastic moduli that scale with the raft size. We also show that the raft size controls the microstructural basis of plastic deformation, resulting in a transition from fracture to ductile failure. △ Less

Submitted 10 March, 2022; v1 submitted 17 June, 2021; originally announced June 2021.

Learning to Control Active Matter

Authors: Martin J Falk, Vahid Alizadehyazdi, Heinrich Jaeger, Arvind Murugan

Abstract: The study of active matter has revealed novel non-equilibrium collective behaviors, illustrating their potential as a new materials platform. However, most works treat active matter as unregulated systems with uniform microscopic energy input, which we refer to as activity. In contrast, functionality in biological materials results from regulating and controlling activity locally over space and ti… ▽ More The study of active matter has revealed novel non-equilibrium collective behaviors, illustrating their potential as a new materials platform. However, most works treat active matter as unregulated systems with uniform microscopic energy input, which we refer to as activity. In contrast, functionality in biological materials results from regulating and controlling activity locally over space and time, as has only recently become experimentally possible for engineered active matter. Designing functionality requires navigation of the high dimensional space of spatio-temporal activity patterns, but brute force approaches are unlikely to be successful without system-specific intuition. Here, we apply reinforcement learning to the task of inducing net transport in a specific direction for a simulated system of Vicsek-like self-propelled disks using a spotlight that increases activity locally. The resulting time-varying patterns of activity learned exploit the distinct physics of the strong and weak coupling regimes. Our work shows how reinforcement learning can reveal physically interpretable protocols for controlling collective behavior in non-equilibrium systems. △ Less

Submitted 6 October, 2021; v1 submitted 10 May, 2021; originally announced May 2021.

Comments: 11 pages, 7 figures

Journal ref: Phys. Rev. Research 3, 033291 (2021)

Dimensions of Timescales in Neuromorphic Computing Systems

Authors: Herbert Jaeger, Dirk Doorakkers, Celestine Lawrence, Giacomo Indiveri

Abstract: This article is a public deliverable of the EU project "Memory technologies with multi-scale time constants for neuromorphic architectures" (MeMScales, https://memscales.eu, Call ICT-06-2019 Unconventional Nanoelectronics, project number 871371). This arXiv version is a verbatim copy of the deliverable report, with administrative information stripped. It collects a wide and varied assortment of ph… ▽ More This article is a public deliverable of the EU project "Memory technologies with multi-scale time constants for neuromorphic architectures" (MeMScales, https://memscales.eu, Call ICT-06-2019 Unconventional Nanoelectronics, project number 871371). This arXiv version is a verbatim copy of the deliverable report, with administrative information stripped. It collects a wide and varied assortment of phenomena, models, research themes and algorithmic techniques that are connected with timescale phenomena in the fields of computational neuroscience, mathematics, machine learning and computer science, with a bias toward aspects that are relevant for neuromorphic engineering. It turns out that this theme is very rich indeed and spreads out in many directions which defy a unified treatment. We collected several dozens of sub-themes, each of which has been investigated in specialized settings (in the neurosciences, mathematics, computer science and machine learning) and has been documented in its own body of literature. The more we dived into this diversity, the more it became clear that our first effort to compose a survey must remain sketchy and partial. We conclude with a list of insights distilled from this survey which give general guidelines for the design of future neuromorphic systems. △ Less

Submitted 21 February, 2021; originally announced February 2021.

Exploring the landscapes of "computing": digital, neuromorphic, unconventional -- and beyond

Authors: Herbert Jaeger

Abstract: The acceleration race of digital computing technologies seems to be steering toward impasses -- technological, economical and environmental -- a condition that has spurred research efforts in alternative, "neuromorphic" (brain-like) computing technologies. Furthermore, since decades the idea of exploiting nonlinear physical phenomena "directly" for non-digital computing has been explored under nam… ▽ More The acceleration race of digital computing technologies seems to be steering toward impasses -- technological, economical and environmental -- a condition that has spurred research efforts in alternative, "neuromorphic" (brain-like) computing technologies. Furthermore, since decades the idea of exploiting nonlinear physical phenomena "directly" for non-digital computing has been explored under names like "unconventional computing", "natural computing", "physical computing", or "in-materio computing". This has been taking place in niches which are small compared to other sectors of computer science. In this paper I stake out the grounds of how a general concept of "computing" can be developed which comprises digital, neuromorphic, unconventional and possible future "computing" paradigms. The main contribution of this paper is a wide-scope survey of existing formal conceptualizations of "computing". The survey inspects approaches rooted in three different kinds of background mathematics: discrete-symbolic formalisms, probabilistic modeling, and dynamical-systems oriented views. It turns out that different choices of background mathematics lead to decisively different understandings of what "computing" is. Across all of this diversity, a unifying coordinate system for theorizing about "computing" can be distilled. Within these coordinates I locate anchor points for a foundational formal theory of a future computing-engineering discipline that includes, but will reach beyond, digital and neuromorphic computing. △ Less

Submitted 3 April, 2021; v1 submitted 24 November, 2020; originally announced November 2020.

Comments: An extended and carefully revised version of this manuscript has now (March 2021) been published as "Toward a generalized theory comprising digital, neuromorphic, and unconventional computing" in the new open-access journal Neuromorphic Computing and Engineering

ACM Class: F.0

Effect of two parallel intruders on net work during granular penetrations

Authors: Swapnil Pravin, Brian Chang, Endao Han, Lionel London, Daniel I. Goldman, Heinrich M. Jaeger, S. Tonia Hsieh

Abstract: The impact of single passive intruders into granular particles has been studied in detail. However, the impact force produced by multiple intruders separated at a distance from one another, and hence the effect of their presence in close proximity to one another, is largely unexplored. Here, we use numerical simulations and laboratory experiments to study the force response of two parallel rods in… ▽ More The impact of single passive intruders into granular particles has been studied in detail. However, the impact force produced by multiple intruders separated at a distance from one another, and hence the effect of their presence in close proximity to one another, is largely unexplored. Here, we use numerical simulations and laboratory experiments to study the force response of two parallel rods intruding vertically into granular media while varying the gap spacing between them. We also explored the effect of variations in friction, intruder size, and particle size on the force response. The net work ($W$) of the two rods over the depth of intrusion was measured, and the instantaneous velocities of particles over the duration of intrusion were calculated by simulations. We found that the work done by the intruders changes with distance between them. We observed a peak in $W$ at a gap spacing of $\sim$3 particle diameters, which was up to 25% greater than $W$ at large separation (\textgreater 11 particle diameters), beyond which the net work plateaued. This peak was likely due to less particle flow between intruders as we found a larger number of strong forces---identified as force chains---in the particle domain at gaps surrounding the peak force. Although higher friction caused greater force generation during intrusion, the gap spacing between the intruders at which the peak work was generated remained unchanged. Larger intruder sizes resulted in greater net work with the peak in $W$ occurring at slightly larger intruder separations. Taken together, our results show that peak work done by two parallel intruders remained within a narrow range, remaining robust to most other tested parameters. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 12 pages, 8 figures, 6 supplemental figures, and appendix

Journal ref: Phys. Rev. E 104, 024902 (2021)

Shear thickening and jamming of dense suspensions: the "roll" of friction

Authors: Abhinendra Singh, Christopher Ness, Ryohei Seto, Juan J de Pablo, Heinrich M Jaeger

Abstract: Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shape… ▽ More Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shapes. It sets a distinct structure of the frictional force network compared to only sliding friction, and from a dynamical perspective leads to an increase in the velocity correlation length, in part responsible for the increased viscosity. The physics of rolling friction is thus a key element in achieving a comprehensive understanding of strongly shear-thickening materials. △ Less

Submitted 7 May, 2020; v1 submitted 25 February, 2020; originally announced February 2020.

Comments: 5 pages, 4 figures. +Supplemental Material--- --- Supplementary Material also consists of the following movies: ---https://youtu.be/wgrfN7jiu1g (Force network in 3D at volume fraction 0.45, at high stress limit, with and without rolling friction) --- https://youtu.be/SMzTB7CsRsY (Force network in 2D at packing fraction 0.7, at high stress limit, with and without rolling friction)

Journal ref: Phys. Rev. Lett. 124, 248005 (2020)

Shape induced segregation and anomalous particle transport under spherical confinement

Authors: Abhinendra Singh, Jiyuan Li, Xikai Jiang, Juan P. Hernández-Ortiz, Heinrich M. Jaeger, Juan J. de Pablo

Abstract: Colloid or nanoparticle mobility under confinement is of central importance to a wide range of physical and biological processes. Here, we introduce a minimal model of particles in a hydrodynamic continuum to examine how particle shape and concentration affect the transport of particles in spherical confinement. Specifically, an immersed boundary-General geometry Ewald-like approach is adopted to… ▽ More Colloid or nanoparticle mobility under confinement is of central importance to a wide range of physical and biological processes. Here, we introduce a minimal model of particles in a hydrodynamic continuum to examine how particle shape and concentration affect the transport of particles in spherical confinement. Specifically, an immersed boundary-General geometry Ewald-like approach is adopted to simulate the dynamics of spheres and cylinders under the influence of short-and long-range fluctuating hydrodynamic interactions with appropriate non-slip conditions at the confining walls. An efficient $\it{O(N)}$ parallel finite element algorithm is used, thereby allowing simulations at high concentrations, while a Chebyshev polynomial approximation is implemented in order to satisfy the fluctuation-dissipation theorem. A concentration-dependent anomalous diffusion is observed for suspended particles. It is found that introducing cylinders in a background of spheres, i.e. particles with a simple degree of anisotropy, has a pronounced influence on the structure and dynamics of the particles. First, increasing the fraction of cylinders induces a particle segregation effect, where spheres are pushed towards the wall and cylinders remain near the center of the cavity. This segregation leads to lower mobility for the spheres relative to that encountered in a system of pure spheres at the same volume fraction. Second, the diffusive-to-anomalous transition and the degree of anomaly--quantified by the power-law exponent in the mean square displacement vs. time relation-both increase as the fraction of cylinders becomes larger. These findings are of relevance for studies of diffusion in the cytoplasm, where proteins exhibit a distribution of size and shapes that could lead to some of the effects identified in the simulations reported here. △ Less

Submitted 5 February, 2020; originally announced February 2020.

Comments: 9 pages, 5 figures

Journal ref: Physics of Fluids 32, 053307 (2020)

Dynamic and programmable cellular-scale granules enable tissue-like materials

Authors: Yin Fang, Endao Han, Xin-Xing Zhang, Yuanwen Jiang, Yiliang Lin, Jiuyun Shi, Jiangbo Wu, Lingyuan Meng, Xiang Gao, Philip J. Griffin, Xianghui Xiao, Hsiu-Ming Tsai, Hua Zhou, Xiaobing Zuo, Qing Zhang, Miaoqi Chu, Qingteng Zhang, Ya Gao, Leah K. Roth, Reiner Bleher, Zhiyuan Ma, Zhang Jiang, Jiping Yue, Chien-Min Kao, Chin-Tu Chen , et al. (4 additional authors not shown)

Abstract: Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component whi… ▽ More Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component which is tightly integrated with its matrix and also responsive to external stimuli at the population level. Here, we demonstrate that cellular-scale hydrated starch granules, an underexplored component in materials science, can turn conventional hydrogels into tissue-like materials when composites are formed. Using several synchrotron-based X-ray techniques, we reveal the mechanically-induced motion and training dynamics of the starch granules in the hydrogel matrix. These dynamic behaviors enable multiple tissue-like properties such as strain-stiffening, anisotropy, mechanical heterogeneity, programmability, mechanochemistry, impact absorption, and self-healability. The starch-hydrogel composites can be processed as robotic skins that maintain these tissue-like characteristics. △ Less

Submitted 9 November, 2019; originally announced November 2019.

Comments: 73 pages, main text and supplemental information

Memory in nonmonotonic stress relaxation of a granular system

Authors: Kieran A. Murphy, Jonathon W. Kruppe, Heinrich M. Jaeger

Abstract: We demonstrate experimentally that a granular packing of glass spheres is capable of storing memory of multiple strain states in the dynamic process of stress relaxation. Modeling the system as a non-interacting population of relaxing elements, we find that the functional form of the predicted relaxation requires a quantitative correction which grows in severity with each additional memory and is… ▽ More We demonstrate experimentally that a granular packing of glass spheres is capable of storing memory of multiple strain states in the dynamic process of stress relaxation. Modeling the system as a non-interacting population of relaxing elements, we find that the functional form of the predicted relaxation requires a quantitative correction which grows in severity with each additional memory and is suggestive of interactions between elements. Our findings have implications for the broad class of soft matter systems that display memory and anomalous relaxation. △ Less

Submitted 16 November, 2019; v1 submitted 4 November, 2019; originally announced November 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 124, 168002 (2020)

Towards Quantifying Neurovascular Resilience

Authors: Stefano Moriconi, Rafael Rehwald, Maria A. Zuluaga, H. Rolf Jäger, Parashkev Nachev, Sébastien Ourselin, M. Jorge Cardoso

Abstract: Whilst grading neurovascular abnormalities is critical for prompt surgical repair, no statistical markers are currently available for predicting the risk of adverse events, such as stroke, and the overall resilience of a network to vascular complications. The lack of compact, fast, and scalable simulations with network perturbations impedes the analysis of the vascular resilience to life-threateni… ▽ More Whilst grading neurovascular abnormalities is critical for prompt surgical repair, no statistical markers are currently available for predicting the risk of adverse events, such as stroke, and the overall resilience of a network to vascular complications. The lack of compact, fast, and scalable simulations with network perturbations impedes the analysis of the vascular resilience to life-threatening conditions, surgical interventions and long-term follow-up. We introduce a graph-based approach for efficient simulations, which statistically estimates biomarkers from a series of perturbations on the patient-specific vascular network. Analog-equivalent circuits are derived from clinical angiographies. Vascular graphs embed mechanical attributes modelling the impedance of a tubular structure with stenosis, tortuosity and complete occlusions. We evaluate pressure and flow distributions, simulating healthy topologies and abnormal variants with perturbations in key pathological scenarios. These describe the intrinsic network resilience to pathology, and delineate the underlying cerebrovascular autoregulation mechanisms. Lastly, a putative graph sampling strategy is devised on the same formulation, to support the topological inference of uncertain neurovascular graphs. △ Less

Submitted 29 October, 2019; originally announced October 2019.

Journal ref: Machine Learning and Medical Engineering for Cardiovascular Health and Intravascular Imaging and Computer Assisted Stenting. MLMECH 2019, CVII-STENT 2019. Lecture Notes in Computer Science, vol 11794. Springer, Cham

Stress fluctuations and shear thickening in dense granular suspensions

Authors: Qin Xu, Abhinendra Singh, Heinrich M. Jaeger

Abstract: We experimentally investigate the rheology and stress fluctuations of granules densely suspended in silicone oil. We find that both thickening strength and stress fluctuations significantly weaken with oil viscosity $η_0$. Comparison of our rheological results to the Wyart-Cates model for describing different dynamic jamming states suggests a transition from frictional contacts to lubrication inte… ▽ More We experimentally investigate the rheology and stress fluctuations of granules densely suspended in silicone oil. We find that both thickening strength and stress fluctuations significantly weaken with oil viscosity $η_0$. Comparison of our rheological results to the Wyart-Cates model for describing different dynamic jamming states suggests a transition from frictional contacts to lubrication interactions as $η_0$ increases. To clarify the contribution from viscous interactions to the rheology, we systematically measure stress fluctuations in various flow states. Reduction of stress fluctuations with $η_0$ indicates that a strong lubrication layer greatly inhibits force correlations among particles. Measuring stress fluctuations in the strong shear thickening regime, we observe a crossover from asymmetric Gamma to symmetric Gaussian distributions and associated with it a decrease of lateral (radial) correlation length $ξ$ with increasing shear rate. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 18 pages, 5 figures

Intrusion into granular media beyond the quasi-static regime

Authors: Leah K. Roth, Endao Han, Heinrich M. Jaeger

Abstract: The drag force exerted on an object intruding into granular media can depend on the object's velocity as well as the depth penetrated. We report on intrusion experiments at constant speed over four orders in magnitude together with systematic molecular dynamics simulations well beyond the quasi-static regime. We find that velocity dependence crosses over to depth dependence at a characteristic tim… ▽ More The drag force exerted on an object intruding into granular media can depend on the object's velocity as well as the depth penetrated. We report on intrusion experiments at constant speed over four orders in magnitude together with systematic molecular dynamics simulations well beyond the quasi-static regime. We find that velocity dependence crosses over to depth dependence at a characteristic time after initial impact. This crossover time scale, which depends on penetration speed, depth, gravity and intruder geometry, challenges current models that assume additive contributions to the drag. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 126, 218001 (2021)

Precision measurement of tribocharging in acoustically levitated sub-millimeter grains

Authors: Adam G. Kline, Melody Xuan Lim, Heinrich M. Jaeger

Abstract: Contact electrification of dielectric grains forms the basis for a myriad of physical phenomena. However, even the basic aspects of collisional charging between grains are still unclear. Here we develop a new experimental method, based on acoustic levitation, which allows us to controllably and repeatedly collide two sub-millimeter grains and measure the evolution of their electric charges. This i… ▽ More Contact electrification of dielectric grains forms the basis for a myriad of physical phenomena. However, even the basic aspects of collisional charging between grains are still unclear. Here we develop a new experimental method, based on acoustic levitation, which allows us to controllably and repeatedly collide two sub-millimeter grains and measure the evolution of their electric charges. This is therefore the first tribocharging experiment to provide complete electric isolation for the grain-grain system from its surroundings. We use this method to measure collisional charging rates between pairs of grains for three different material combinations: polyethylene-polyethylene, polystyrene-polystyrene, and polystyrene-sulfonated polystyrene. The ability to directly and noninvasively collide particles of different constituent materials, chemical functionality, size, and shape opens the door to detailed studies of collisional charging in granular materials. △ Less

Submitted 21 October, 2019; originally announced October 2019.

Let's agree to disagree: learning highly debatable multirater labelling

Authors: Carole H. Sudre, Beatriz Gomez Anson, Silvia Ingala, Chris D. Lane, Daniel Jimenez, Lukas Haider, Thomas Varsavsky, Ryutaro Tanno, Lorna Smith, Sébastien Ourselin, Rolf H. Jäger, M. Jorge Cardoso

Abstract: Classification and differentiation of small pathological objects may greatly vary among human raters due to differences in training, expertise and their consistency over time. In a radiological setting, objects commonly have high within-class appearance variability whilst sharing certain characteristics across different classes, making their distinction even more difficult. As an example, markers… ▽ More Classification and differentiation of small pathological objects may greatly vary among human raters due to differences in training, expertise and their consistency over time. In a radiological setting, objects commonly have high within-class appearance variability whilst sharing certain characteristics across different classes, making their distinction even more difficult. As an example, markers of cerebral small vessel disease, such as enlarged perivascular spaces (EPVS) and lacunes, can be very varied in their appearance while exhibiting high inter-class similarity, making this task highly challenging for human raters. In this work, we investigate joint models of individual rater behaviour and multirater consensus in a deep learning setting, and apply it to a brain lesion object-detection task. Results show that jointly modelling both individual and consensus estimates leads to significant improvements in performance when compared to directly predicting consensus labels, while also allowing the characterization of human-rater consistency. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Comments: Accepted at MICCAI 2019

Temperature Dependence of Nylon and PTFE Triboelectrification

Authors: Isaac A. Harris, Melody X. Lim, Heinrich M. Jaeger

Abstract: Contact electrification, or tribocharging, is pertinent to a broad range of industrial and natural processes involving dielectric materials. However, the basic mechanism by which charge is transferred between insulators is still unclear. Here, we use a simple apparatus that brings two macroscopic surfaces into repeated contact and measures the charge on the surfaces after each contact. We vary the… ▽ More Contact electrification, or tribocharging, is pertinent to a broad range of industrial and natural processes involving dielectric materials. However, the basic mechanism by which charge is transferred between insulators is still unclear. Here, we use a simple apparatus that brings two macroscopic surfaces into repeated contact and measures the charge on the surfaces after each contact. We vary the temperature of the surfaces, and find that increasing temperature leads to a decrease in the magnitude of charge transfer. When paired with a Monte-Carlo simulation and TGA measurements, our results support a mechanism where adsorbed surface water is crucial for charge exchange. Our setup is easily extendable to a variety of industrially relevant materials. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Comments: 10 pages, 12 figures. Submitted to Physical Review Materials

Journal ref: Phys. Rev. Materials 3, 085603 (2019)

On the effect of forcing of fold bifurcations and early-warning signals in population dynamics

Authors: Flavia Remo, Gabriel Fuhrmann, Tobias Jäger

Abstract: The classical fold bifurcation is a paradigmatic example of a critical transition. It has been used in a variety of contexts, including in particular ecology and climate science, to motivate the role of slow recovery rates and increased autocorrelations as early-warning signals of such transitions. We study the influence of external forcing on fold bifurcations and the respective early-warning s… ▽ More The classical fold bifurcation is a paradigmatic example of a critical transition. It has been used in a variety of contexts, including in particular ecology and climate science, to motivate the role of slow recovery rates and increased autocorrelations as early-warning signals of such transitions. We study the influence of external forcing on fold bifurcations and the respective early-warning signals. Thereby, our prime examples are single-species population dynamical models with Allee effect under the influence of either quasiperiodic forcing or bounded random noise. We show that the presence of these external factors may lead to so-called non-smooth fold bifurcations, and thereby has a significant impact on the behaviour of the Lyapunov exponents (and hence the recovery rates). In particular, it may lead to the absence of critical slowing down prior to population collapse. More precisely, unlike in the unforced case, the question whether slow recovery rates can be observed or detected prior to the transition crucially depends on the chosen time-scales and the size of the considered data set. △ Less

Submitted 8 September, 2020; v1 submitted 13 April, 2019; originally announced April 2019.

Open-source Tracked Ultrasound with Anser EMT

Authors: Alfred Michael Franz, Herman Alexander Jaeger, Alexander Seitel, Padraig Cantillon-Murphy, Lena Maier-Hein

Abstract: Image-guided Interventions (IGT) have shown a huge potential to improve medical procedures or even allow for new treatment options. Most ultrasound(US)-based IGT systems use electromagnetic (EM) tracking for localizing US probes and instruments. However, EM tracking is not always reliable in clinical settings because the EM field can be disturbed by medical equipment. So far, most researchers used… ▽ More Image-guided Interventions (IGT) have shown a huge potential to improve medical procedures or even allow for new treatment options. Most ultrasound(US)-based IGT systems use electromagnetic (EM) tracking for localizing US probes and instruments. However, EM tracking is not always reliable in clinical settings because the EM field can be disturbed by medical equipment. So far, most researchers used and studied commercial EM trackers with their IGT systems which in turn limited the possibilities to customize the trackers in order minimize distortions and make the systems robust for clinical use. In light of current good scientific practice initiatives that increasingly request research to publish the source code corresponding to a paper, the aim of this work was to test the feasibility of using the open-source EM tracker Anser EMT for localizing US probes in a clinical US suite for the first time. The standardized protocol of Hummel et al. yielded a jitter of 0.1$\pm$0.1 mm and a position error of 1.1$\pm$0.7 mm, which is comparable to 0.1 mm and 1.0 mm of a commercial NDI Aurora system. The rotation error of Anser EMT was 0.15$\pm$0.16°, which is lower than at least 0.4° for the commercial tracker. We consider tracked US as feasible with Anser EMT if an accuracy of 1-2 mm is sufficient for a specific application. △ Less

Submitted 15 March, 2019; originally announced March 2019.

Comments: Accepted for publication in Bildverarbeitung für die Medizin (BVM) Proceedings 2019

The intertwined roles of particle shape and surface roughness in controlling the shear strength of a granular material

Authors: Kieran A. Murphy, Arthur K. MacKeith, Leah K. Roth, Heinrich M. Jaeger

Abstract: Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D printed, convex lens-shaped particles, we measure the stress-strain response under repeated compressive loading and find that the aggregate's shear strength falls… ▽ More Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D printed, convex lens-shaped particles, we measure the stress-strain response under repeated compressive loading and find that the aggregate's shear strength falls rapidly when compared to other particle shapes. We probe the granular material at mm-scales with X-ray computed tomography and $μ$m-scales with high-resolution surface metrology to look for the cause of the degradation. We find that wear due to accumulated deformation smooths out the lens surfaces in a controlled and systematic manner that correlates with a significant loss of shear strength observed for the assembly as a whole. The sensitivity of lenses to changes in surface properties contrasts with results for assemblies of 3D printed tetrahedra and spheres, which under the same load cycling are found to exhibit only minor degradation in strength. This case study provides insight into the relationship between particle shape, surface wear, and the overall material response, and suggests new strategies when designing a granular material with desired evolution of properties under repeated deformation. △ Less

Submitted 24 June, 2019; v1 submitted 8 February, 2019; originally announced February 2019.

Comments: 6 pages, 5 figures

Edges control clustering in levitated granular matter

Authors: Melody Xuan Lim, Kieran A. Murphy, Heinrich M. Jaeger

Abstract: The properties of small clusters depend dramatically on the interactions between their constituent particles. However, it remains challenging to design and tune the interactions between macroscopic particles, such as in a granular material. Here, we use acoustic levitation to trap macroscopic grains and induce forces between them. Our main results show that particles levitated in an acoustic field… ▽ More The properties of small clusters depend dramatically on the interactions between their constituent particles. However, it remains challenging to design and tune the interactions between macroscopic particles, such as in a granular material. Here, we use acoustic levitation to trap macroscopic grains and induce forces between them. Our main results show that particles levitated in an acoustic field prefer to make contact along sharp edges. The radius of curvature of the edges directly controls the magnitude of these forces. These highly directional interactions, combined with local contact forces, give rise to a diverse array of cluster shapes. Our results open up new possibilities for the design of specific forces between macroscopic particles, directing their assembly, and actuating their motion. △ Less

Submitted 6 June, 2019; v1 submitted 24 January, 2019; originally announced January 2019.

Comments: Submitted to the special edition of Granular Matter, In Memoriam of Robert P. Behringer. For supplementary movies, see https://youtu.be/u_IJsMC69-8 and https://youtu.be/rxNYclVQFUY

Tuning Interparticle Hydrogen Bonding in Shear-Jamming Suspensions: Kinetic Effects and Consequences for Tribology and Rheology

Authors: Nicole M. James, Chiao-Peng Hsu, Nicholas D. Spencer, Heinrich M. Jaeger, Lucio Isa

Abstract: The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so fa… ▽ More The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so far remained unclear. Here, we present atomic force microscopy studies to assess interparticle adhesion, its relationship to friction, and how these attributes are influenced by urea, a molecule that interferes with hydrogen bonding. We characterize the kinetics of this process with nuclear magnetic resonance, relating it to the time dependence of the macroscopic flow behavior with rheological measurements. We find that time-dependent urea sorption reduces friction and adhesion, causing a shift in the shear-jamming onset. These results extend our mechanistic understanding of chemical effects on the nature of shear jamming, promising new avenues for fundamental studies and applications alike. △ Less

Submitted 15 January, 2019; originally announced January 2019.