-
Finite-Sample Properties of Generalized Ridge Estimators for Nonlinear Models
Authors:
Masamune Iwasawa
Abstract:
Parameter estimation can result in substantial mean squared error (MSE), even when consistent estimators are used and the sample size is large. This paper addresses the longstanding statistical challenge of analyzing the bias and MSE of ridge-type estimators in nonlinear models, including duration, Poisson, and multinomial choice models, where theoretical results have been scarce. Employing a fini…
▽ More
Parameter estimation can result in substantial mean squared error (MSE), even when consistent estimators are used and the sample size is large. This paper addresses the longstanding statistical challenge of analyzing the bias and MSE of ridge-type estimators in nonlinear models, including duration, Poisson, and multinomial choice models, where theoretical results have been scarce. Employing a finite-sample approximation technique developed in the econometrics literature, this study derives new theoretical results showing that the generalized ridge maximum likelihood estimator (MLE) achieves lower finite-sample MSE than the conventional MLE across a broad class of nonlinear models. Importantly, the analysis extends beyond parameter estimation to model-based prediction, demonstrating that the generalized ridge estimator improves predictive accuracy relative to the generic MLE for sufficiently small penalty terms, regardless of the validity of the incorporated hypotheses. Extensive simulation studies and an empirical application involving the estimation of marginal mean and quantile treatment effects further support the superior performance and practical applicability of the proposed method.
△ Less
Submitted 26 April, 2025;
originally announced April 2025.
-
Self-Recovery Prompting: Promptable General Purpose Service Robot System with Foundation Models and Self-Recovery
Authors:
Mimo Shirasaka,
Tatsuya Matsushima,
Soshi Tsunashima,
Yuya Ikeda,
Aoi Horo,
So Ikoma,
Chikaha Tsuji,
Hikaru Wada,
Tsunekazu Omija,
Dai Komukai,
Yutaka Matsuo Yusuke Iwasawa
Abstract:
A general-purpose service robot (GPSR), which can execute diverse tasks in various environments, requires a system with high generalizability and adaptability to tasks and environments. In this paper, we first developed a top-level GPSR system for worldwide competition (RoboCup@Home 2023) based on multiple foundation models. This system is both generalizable to variations and adaptive by prompting…
▽ More
A general-purpose service robot (GPSR), which can execute diverse tasks in various environments, requires a system with high generalizability and adaptability to tasks and environments. In this paper, we first developed a top-level GPSR system for worldwide competition (RoboCup@Home 2023) based on multiple foundation models. This system is both generalizable to variations and adaptive by prompting each model. Then, by analyzing the performance of the developed system, we found three types of failure in more realistic GPSR application settings: insufficient information, incorrect plan generation, and plan execution failure. We then propose the self-recovery prompting pipeline, which explores the necessary information and modifies its prompts to recover from failure. We experimentally confirm that the system with the self-recovery mechanism can accomplish tasks by resolving various failure cases. Supplementary videos are available at https://sites.google.com/view/srgpsr .
△ Less
Submitted 26 September, 2023; v1 submitted 25 September, 2023;
originally announced September 2023.
-
SCF-FDPS: A Fast $N$-body Code for Simulating Disk-halo Systems
Authors:
Shunsuke Hozumi,
Keigo Nitadori,
Masaki Iwasawa
Abstract:
A fast $N$-body code has been developed for simulating a stellar disk embedded in a live dark matter halo. In generating its Poisson solver, a self-consistent field (SCF) code which inherently possesses perfect scalability is incorporated into a tree code which is parallelized using a library termed Framework for Developing Particle Simulators (FDPS). Thus, the code developed here is called SCF-FD…
▽ More
A fast $N$-body code has been developed for simulating a stellar disk embedded in a live dark matter halo. In generating its Poisson solver, a self-consistent field (SCF) code which inherently possesses perfect scalability is incorporated into a tree code which is parallelized using a library termed Framework for Developing Particle Simulators (FDPS). Thus, the code developed here is called SCF-FDPS. This code has realized the speedup of a conventional tree code by applying an SCF method not only to the calculation of the self-gravity of the halo but also to that of the gravitational interactions between the disk and halo particles. Consequently, in the SCF-FDPS code, a tree algorithm is applied only to calculate the self-gravity of the disk. On a many-core parallel computer, the SCF-FDPS code has performed at least three times, in some case nearly an order of magnitude, faster than an extremely-tuned tree code on it, if the numbers of disk and halo particles are, respectively, fixed for both codes. In addition, the SCF-FDPS code shows that the cpu cost scales almost linearly with the total number of particles and almost inversely with the number of cores. We find that the time evolution of a disk-halo system simulated with the SCF-FDPS code is, in large measure, similar to that obtained using the tree code. We suggest how the present code can be extended to cope with a wide variety of disk-galaxy simulations.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Particle-particle Particle-tree Code for Planetary System Formation with Individual Cut-off Method: GPLUM
Authors:
Yota Ishigaki,
Junko Kominami,
Junichiro Makino,
Masaki Fujimoto,
Masaki Iwasawa
Abstract:
In a standard theory of the formation of the planets in our Solar System, terrestrial planets and cores of gas giants are formed through accretion of kilometer-sized objects (planetesimals) in a protoplanetary disk. Gravitational $N$-body simulations of a disk system made up of numerous planetesimals are the most direct way to study the accretion process. However, the use of $N$-body simulations h…
▽ More
In a standard theory of the formation of the planets in our Solar System, terrestrial planets and cores of gas giants are formed through accretion of kilometer-sized objects (planetesimals) in a protoplanetary disk. Gravitational $N$-body simulations of a disk system made up of numerous planetesimals are the most direct way to study the accretion process. However, the use of $N$-body simulations has been limited to idealized models (e.g. perfect accretion) and/or narrow spatial ranges in the radial direction, due to the limited number of simulation runs and particles available. We have developed new $N$-body simulation code equipped with a particle-particle particle-tree (${\rm P^3T}$) scheme for studying the planetary system formation process: GPLUM. For each particle, GPLUM uses the fourth-order Hermite scheme to calculate gravitational interactions with particles within cut-off radii and the Barnes-Hut tree scheme for particles outside the cut-off radii. In existing implementations, ${\rm P^3T}$ schemes use the same cut-off radius for all particles, making a simulation become slower when the mass range of the planetesimal population becomes wider. We have solved this problem by allowing each particle to have an appropriate cut-off radius depending on its mass, its distance from the central star, and the local velocity dispersion of planetesimals. In addition to achieving a significant speed-up, we have also improved the scalability of the code to reach a good strong-scaling performance up to 1024 cores in the case of $N=10^6$. GPLUM is freely available from https://github.com/YotaIshigaki/GPLUM with MIT license.
△ Less
Submitted 16 June, 2021; v1 submitted 30 July, 2020;
originally announced July 2020.
-
PeTar: a high-performance N-body code for modeling massive collisional stellar systems
Authors:
Long Wang,
Masaki Iwasawa,
Keigo Nitadori,
Junichiro Makino
Abstract:
The numerical simulations of massive collisional stellar systems, such as globular clusters (GCs), are very time-consuming. Until now, only a few realistic million-body simulations of GCs with a small fraction of binaries (5%) have been performed by using the NBODY6++GPU code. Such models took half a year computational time on a GPU based super-computer. In this work, we develop a new N-body code,…
▽ More
The numerical simulations of massive collisional stellar systems, such as globular clusters (GCs), are very time-consuming. Until now, only a few realistic million-body simulations of GCs with a small fraction of binaries (5%) have been performed by using the NBODY6++GPU code. Such models took half a year computational time on a GPU based super-computer. In this work, we develop a new N-body code, PeTar, by combining the methods of Barnes-Hut tree, Hermite integrator and slow-down algorithmic regularization (SDAR). The code can accurately handle an arbitrary fraction of multiple systems (e.g. binaries, triples) while keeping a high performance by using the hybrid parallelization methods with MPI, OpenMP, SIMD instructions and GPU. A few benchmarks indicate that PeTar and NBODY6++GPU have a very good agreement on the long-term evolution of the global structure, binary orbits and escapers. On a highly configured GPU desktop computer, the performance of a million-body simulation with all stars in binaries by using PeTar is 11 times faster than that of NBODY6++GPU. Moreover, on the Cray XC50 supercomputer, PeTar well scales when number of cores increase. The ten million-body problem, which covers the region of ultra compact dwarfs and nuclearstar clusters, becomes possible to be solved.
△ Less
Submitted 27 July, 2020; v1 submitted 30 June, 2020;
originally announced June 2020.
-
Accelerated FDPS --- Algorithms to Use Accelerators with FDPS
Authors:
Masaki Iwasawa,
Daisuke Namekata,
Keigo Nitadori,
Kentaro Nomura,
Long Wang,
Miyuki Tsubouchi,
Junichiro Makino
Abstract:
In this paper, we describe the algorithms we implemented in FDPS to make efficient use of accelerator hardware such as GPGPUs. We have developed FDPS to make it possible for many researchers to develop their own high-performance parallel particle-based simulation programs without spending large amount of time for parallelization and performance tuning. The basic idea of FDPS is to provide a high-p…
▽ More
In this paper, we describe the algorithms we implemented in FDPS to make efficient use of accelerator hardware such as GPGPUs. We have developed FDPS to make it possible for many researchers to develop their own high-performance parallel particle-based simulation programs without spending large amount of time for parallelization and performance tuning. The basic idea of FDPS is to provide a high-performance implementation of parallel algorithms for particle-based simulations in a "generic" form, so that researchers can define their own particle data structure and interparticle interaction functions and supply them to FDPS. FDPS compiled with user-supplied data type and interaction function provides all necessary functions for parallelization, and using those functions researchers can write their programs as though they are writing simple non-parallel program. It has been possible to use accelerators with FDPS, by writing the interaction function that uses the accelerator. However, the efficiency was limited by the latency and bandwidth of communication between the CPU and the accelerator and also by the mismatch between the available degree of parallelism of the interaction function and that of the hardware parallelism. We have modified the interface of user-provided interaction function so that accelerators are more efficiently used. We also implemented new techniques which reduce the amount of work on the side of CPU and amount of communication between CPU and accelerators. We have measured the performance of N-body simulations on a systems with NVIDIA Volta GPGPU using FDPS and the achieved performance is around 27 \% of the theoretical peak limit. We have constructed a detailed performance model, and found that the current implementation can achieve good performance on systems with much smaller memory and communication bandwidth.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
Implementation and Performance of Barnes-Hut N-body algorithm on Extreme-scale Heterogeneous Many-core Architectures
Authors:
Masaki Iwasawa,
Daisuke Namekata,
Ryo Sakamoto,
Takashi Nakamura,
Yasuyuki Kimura,
Keigo Nitadori,
Long Wang,
Miyuki Tsubouchi,
Jun Makino,
Zhao Liu,
Haohuan Fu,
Guangwen Yang
Abstract:
In this paper, we report the implementation and measured performance of our extreme-scale global simulation code on Sunway TaihuLight and two PEZY-SC2 systems: Shoubu System B and Gyoukou. The numerical algorithm is the parallel Barnes-Hut tree algorithm, which has been used in many large-scale astrophysical particle-based simulations. Our implementation is based on our FDPS framework. However, th…
▽ More
In this paper, we report the implementation and measured performance of our extreme-scale global simulation code on Sunway TaihuLight and two PEZY-SC2 systems: Shoubu System B and Gyoukou. The numerical algorithm is the parallel Barnes-Hut tree algorithm, which has been used in many large-scale astrophysical particle-based simulations. Our implementation is based on our FDPS framework. However, the extremely large numbers of cores of the systems used (10M on TaihuLight and 16M on Gyoukou) and their relatively poor memory and network bandwidth pose new challenges. We describe the new algorithms introduced to achieve high efficiency on machines with low memory bandwidth. The measured performance is 47.9, 10.6 PF, and 1.01PF on TaihuLight, Gyoukou and Shoubu System B (efficiency 40\%, 23.5\% and 35.5\%). The current code is developed for the simulation of planetary rings, but most of the new algorithms are useful for other simulations, and are now available in the FDPS framework.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
A Mean-Field Approach to Simulating the Merging of Collisionless Stellar Systems Using a Particle-Based Method
Authors:
Shunsuke Hozumi,
Masaki Iwasawa,
Keigo Nitadori
Abstract:
We present a mean-field approach to simulating merging processes of two spherical collisionless stellar systems. This approach is realized with a self-consistent field (SCF) method in which the full spatial dependence of the density and potential of a system is expanded in a set of basis functions for solving Poisson's equation. In order to apply this SCF method to a merging situation where two sy…
▽ More
We present a mean-field approach to simulating merging processes of two spherical collisionless stellar systems. This approach is realized with a self-consistent field (SCF) method in which the full spatial dependence of the density and potential of a system is expanded in a set of basis functions for solving Poisson's equation. In order to apply this SCF method to a merging situation where two systems are moving in space, we assign the expansion center to the center of mass of each system, the position of which is followed by a mass-less particle placed at that position initially. Merging simulations over a wide range of impact parameters are performed using both an SCF code developed here and a tree code. The results of each simulation produced by the two codes show excellent agreement in the evolving morphology of the merging systems and in the density and velocity dispersion profiles of the merged systems. However, comparing the results generated by the tree code to those obtained with the softening-free SCF code, we have found that in large impact parameter cases, a softening length of the Plummer type introduced in the tree code has an effect of advancing the orbital phase of the two systems in the merging process at late times. We demonstrate that the faster orbital phase originates from the larger convergence length to the pure Newtonian force. Other application problems suitable to the current SCF code are also discussed.
△ Less
Submitted 7 March, 2019;
originally announced March 2019.
-
PENTACLE: Parallelized Particle-Particle Particle-Tree Code for Planet Formation
Authors:
Masaki Iwasawa,
Shoichi Oshino,
Michiko S. Fujii,
Yasunori Hori
Abstract:
We have newly developed a Parallelized Particle-Particle Particle-tree code for Planet formation, PENTACLE, which is a parallelized hybrid $N$-body integrator executed on a CPU-based (super)computer. PENTACLE uses a 4th-order Hermite algorithm to calculate gravitational interactions between particles within a cutoff radius and a Barnes-Hut tree method for gravity from particles beyond. It also imp…
▽ More
We have newly developed a Parallelized Particle-Particle Particle-tree code for Planet formation, PENTACLE, which is a parallelized hybrid $N$-body integrator executed on a CPU-based (super)computer. PENTACLE uses a 4th-order Hermite algorithm to calculate gravitational interactions between particles within a cutoff radius and a Barnes-Hut tree method for gravity from particles beyond. It also implements an open-source library designed for full automatic parallelization of particle simulations, FDPS (Framework for Developing Particle Simulator) to parallelize a Barnes-Hut tree algorithm for a memory-distributed supercomputer. These allow us to handle $1-10$ million particles in a high-resolution $N$-body simulation on CPU clusters for collisional dynamics, including physical collisions in a planetesimal disc. In this paper, we show the performance and the accuracy of PENTACLE in terms of $\tilde{R}_{\rm cut}$ and a time-step $Δt$. It turns out that the accuracy of a hybrid $N$-body simulation is controlled through $Δt / \tilde{R}_{\rm cut}$ and $Δt / \tilde{R}_{\rm cut} \sim 0.1$ is necessary to simulate accurately accretion process of a planet for $\geq 10^6$ years. For all those who interested in large-scale particle simulations, PENTACLE customized for planet formation will be freely available from https://github.com/PENTACLE-Team/PENTACLE under the MIT lisence.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
Fortran interface layer of the framework for developing particle simulator FDPS
Authors:
Daisuke Namekata,
Masaki Iwasawa,
Keigo Nitadori,
Ataru Tanikawa,
Takayuki Muranushi,
Long Wang,
Natsuki Hosono,
Kentaro Nomura,
Junichiro Makino
Abstract:
Numerical simulations based on particle methods have been widely used in various fields including astrophysics. To date, simulation softwares have been developed by individual researchers or research groups in each field, with a huge amount of time and effort, even though numerical algorithms used are very similar. To improve the situation, we have developed a framework, called FDPS, which enables…
▽ More
Numerical simulations based on particle methods have been widely used in various fields including astrophysics. To date, simulation softwares have been developed by individual researchers or research groups in each field, with a huge amount of time and effort, even though numerical algorithms used are very similar. To improve the situation, we have developed a framework, called FDPS, which enables researchers to easily develop massively parallel particle simulation codes for arbitrary particle methods. Until version 3.0, FDPS have provided API only for C++ programing language. This limitation comes from the fact that FDPS is developed using the template feature in C++, which is essential to support arbitrary data types of particle. However, there are many researchers who use Fortran to develop their codes. Thus, the previous versions of FDPS require such people to invest much time to learn C++. This is inefficient. To cope with this problem, we newly developed a Fortran interface layer in FDPS, which provides API for Fortran. In order to support arbitrary data types of particle in Fortran, we design the Fortran interface layer as follows. Based on a given derived data type in Fortran representing particle, a Python script provided by us automatically generates a library that manipulates the C++ core part of FDPS. This library is seen as a Fortran module providing API of FDPS from the Fortran side and uses C programs internally to interoperate Fortran with C++. In this way, we have overcome several technical issues when emulating `template' in Fortran. By using the Fortran interface, users can develop all parts of their codes in Fortran. We show that the overhead of the Fortran interface part is sufficiently small and a code written in Fortran shows a performance practically identical to the one written in C++.
△ Less
Submitted 25 April, 2018; v1 submitted 24 April, 2018;
originally announced April 2018.
-
Unconvergence of Very Large Scale GI Simulations
Authors:
Natsuki Hosono,
Masaki Iwasawa,
Ataru Tanikawa,
Keigo Nitadori,
Takayuki Muranushi,
Junichiro Makino
Abstract:
The giant impact (GI) is one of the most important hypotheses both in planetary science and geoscience, since it is related to the origin of the Moon and also the initial condition of the Earth. A number of numerical simulations have been done using the smoothed particle hydrodynamics (SPH) method. However, GI hypothesis is currently in a crisis. The "canonical" GI scenario failed to explain the i…
▽ More
The giant impact (GI) is one of the most important hypotheses both in planetary science and geoscience, since it is related to the origin of the Moon and also the initial condition of the Earth. A number of numerical simulations have been done using the smoothed particle hydrodynamics (SPH) method. However, GI hypothesis is currently in a crisis. The "canonical" GI scenario failed to explain the identical isotope ratio between the Earth and the Moon. On the other hand, little has been known about the reliability of the result of GI simulations. In this paper, we discuss the effect of the resolution on the results of the GI simulations by varying the number of particles from $3 \times10^3$ to $10^8$. We found that the results does not converge, but shows oscillatory behaviour. We discuss the origin of this oscillatory behaviour.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
Implementation and performance of FDPS: A Framework Developing Parallel Particle Simulation Codes
Authors:
Masaki Iwasawa,
Ataru Tanikawa,
Natsuki Hosono,
Keigo Nitadori,
Takayuki Muranushi,
Junichiro Makino
Abstract:
We present the basic idea, implementation, measured performance and performance model of FDPS (Framework for developing particle simulators). FDPS is an application-development framework which helps the researchers to develop particle-based simulation programs for large-scale distributed-memory parallel supercomputers. A particle-based simulation program for distributed-memory parallel computers n…
▽ More
We present the basic idea, implementation, measured performance and performance model of FDPS (Framework for developing particle simulators). FDPS is an application-development framework which helps the researchers to develop particle-based simulation programs for large-scale distributed-memory parallel supercomputers. A particle-based simulation program for distributed-memory parallel computers needs to perform domain decomposition, redistribution of particles, and gathering of particle information for interaction calculation. Also, even if distributed-memory parallel computers are not used, in order to reduce the amount of computation, algorithms such as Barnes-Hut tree method should be used for long-range interactions. For short-range interactions, some methods to limit the calculation to neighbor particles are necessary. FDPS provides all of these necessary functions for efficient parallel execution of particle-based simulations as "templates", which are independent of the actual data structure of particles and the functional form of the interaction. By using FDPS, researchers can write their programs with the amount of work necessary to write a simple, sequential and unoptimized program of O(N^2) calculation cost, and yet the program, once compiled with FDPS, will run efficiently on large-scale parallel supercomputers. A simple gravitational N-body program can be written in around 120 lines. We report the actual performance of these programs and the performance model. The weak scaling performance is very good, and almost linear speedup was obtained for up to the full system of K computer. The minimum calculation time per timestep is in the range of 30 ms (N=10^7) to 300 ms (N=10^9). These are currently limited by the time for the calculation of the domain decomposition and communication necessary for the interaction calculation. We discuss how we can overcome these bottlenecks.
△ Less
Submitted 24 April, 2016; v1 submitted 13 January, 2016;
originally announced January 2016.
-
GPU-Enabled Particle-Particle Particle-Tree Scheme for Simulating Dense Stellar Cluster System
Authors:
Masaki Iwasawa,
Simon Portegies Zwart,
Junichiro Makino
Abstract:
We describe the implementation and performance of the ${\rm P^3T}$ (Particle-Particle Particle-Tree) scheme for simulating dense stellar systems. In ${\rm P^3T}$, the force experienced by a particle is split into short-range and long-range contributions. Short-range forces are evaluated by direct summation and integrated with the fourth order Hermite predictor-corrector method with the block times…
▽ More
We describe the implementation and performance of the ${\rm P^3T}$ (Particle-Particle Particle-Tree) scheme for simulating dense stellar systems. In ${\rm P^3T}$, the force experienced by a particle is split into short-range and long-range contributions. Short-range forces are evaluated by direct summation and integrated with the fourth order Hermite predictor-corrector method with the block timesteps. For long-range forces, we use a combination of the Barnes-Hut tree code and the leapfrog integrator. The tree part of our simulation environment is accelerated using graphical processing units (GPU), whereas the direct summation is carried out on the host CPU. Our code gives excellent performance and accuracy for star cluster simulations with a large number of particles even when the core size of the star cluster is small.
△ Less
Submitted 15 June, 2015;
originally announced June 2015.
-
Eccentric evolution of SMBH binaries
Authors:
Masaki Iwasawa,
Sangyong An,
Tatsushi Matsubayashi,
Yoko Funato,
Junichiro Makino
Abstract:
In recent numerical simulations \citep{matsubayashi07,lockmann08}, it has been found that the eccentricity of supermassive black hole(SMBH) - intermediate black hole(IMBH) binaries grows toward unity through interactions with stellar background. This increase of eccentricity reduces the merging timescale of the binary through the gravitational radiation to the value well below the Hubble Time. It…
▽ More
In recent numerical simulations \citep{matsubayashi07,lockmann08}, it has been found that the eccentricity of supermassive black hole(SMBH) - intermediate black hole(IMBH) binaries grows toward unity through interactions with stellar background. This increase of eccentricity reduces the merging timescale of the binary through the gravitational radiation to the value well below the Hubble Time. It also gives the theoretical explanation of the existence of eccentric binary such as that in OJ287 \citep{lehto96, valtonen08}. In self-consistent N-body simulations, this increase of eccentricity is always observed. On the other hand, the result of scattering experiment between SMBH binaries and field stars \citep{quinlan96} indicated no increase of eccentricity. This discrepancy leaves the high eccentricity of the SMBH binaries in $N$-body simulations unexplained. Here we present a stellar-dynamical mechanism that drives the increase of the eccentricity of an SMBH binary with large mass ratio. There are two key processes involved. The first one is the Kozai mechanism under non-axisymmetric potential, which effectively randomizes the angular momenta of surrounding stars. The other is the selective ejection of stars with prograde orbits. Through these two mechanisms, field stars extract the orbital angular momentum of the SMBH binary. Our proposed mechanism causes the increase in the eccentricity of most of SMBH binaries, resulting in the rapid merger through gravitational wave radiation. Our result has given a definite solution to the "last-parsec problem".
△ Less
Submitted 17 November, 2010;
originally announced November 2010.
-
The origin of S-stars and a young stellar disk: distribution of debris stars of a sinking star cluster
Authors:
Michiko Fujii,
Masaki Iwasawa,
Yoko Funato,
Junichiro Makino
Abstract:
Within the distance of 1 pc from the Galactic center (GC), more than 100 young massive stars have been found. The massive stars at 0.1-1 pc from the GC are located in one or two disks, while those within 0.1 pc from the GC, S-stars, have an isotropic distribution. How these stars are formed is not well understood, especially for S-stars. Here we propose that a young star cluster with an intermedia…
▽ More
Within the distance of 1 pc from the Galactic center (GC), more than 100 young massive stars have been found. The massive stars at 0.1-1 pc from the GC are located in one or two disks, while those within 0.1 pc from the GC, S-stars, have an isotropic distribution. How these stars are formed is not well understood, especially for S-stars. Here we propose that a young star cluster with an intermediate-mass black hole (IMBH) can form both the disks and S-stars. We performed a fully self-consistent $N$-body simulation of a star cluster near the GC. Stars escaped from the tidally disrupted star cluster were carried to the GC due to an 1:1 mean motion resonance with the IMBH formed in the cluster. In the final phase of the evolution, the eccentricity of the IMBH becomes very high. In this phase, stars carried by the 1:1 resonance with the IMBH were dropped from the resonance and their orbits are randomized by a chaotic Kozai mechanism. The mass function of these carried stars is extremely top-heavy within 10". The surface density distributions of young massive stars has a slope of -1.5 within 10" from the GC. The distribution of stars in the most central region is isotropic. These characteristics agree well with those of stars observed within 10" from the GC.
△ Less
Submitted 21 May, 2010; v1 submitted 22 March, 2010;
originally announced March 2010.
-
Trojan Stars in the Galactic Center
Authors:
Michiko Fujii,
Masaki Iwasawa,
Yoko Funato,
Junichiro Makino
Abstract:
We performed, for the first time, the simulation of spiral-in of a star cluster formed close to the Galactic center (GC) using a fully self-consistent $N$-body model. In our model, the central super-massive black hole (SMBH) is surrounded by stars and the star cluster. Not only are the orbits of stars and the cluster stars integrated self-consistently, but the stellar evolution, collisions and m…
▽ More
We performed, for the first time, the simulation of spiral-in of a star cluster formed close to the Galactic center (GC) using a fully self-consistent $N$-body model. In our model, the central super-massive black hole (SMBH) is surrounded by stars and the star cluster. Not only are the orbits of stars and the cluster stars integrated self-consistently, but the stellar evolution, collisions and merging of the cluster stars are also included. We found that an intermediate-mass black hole (IMBH) is formed in the star cluster and stars escaped from the cluster are captured into a 1:1 mean motion resonance with the IMBH. These "Trojan" stars are brought close to the SMBH by the IMBH, which spirals into the GC due to the dynamical friction. Our results show that, once the IMBH is formed, it brings the massive stars to the vicinity of the central SMBH even after the star cluster itself is disrupted. Stars carried by the IMBH form a disk similar to the observed disks and the core of the cluster including the IMBH has properties similar to those of IRS13E, which is a compact assembly of several young stars.
△ Less
Submitted 15 January, 2009; v1 submitted 17 July, 2008;
originally announced July 2008.
-
Point defects and clustering in uranium dioxide by LSDA+U calculations
Authors:
Hua Y. Geng,
Ying Chen,
Yasunori Kaneta,
Misako Iwasawa,
Toshiharu Ohnuma,
Motoyasu Kinoshita
Abstract:
A comprehensive investigation on point defects and their clustering behavior in nonstoichiometric uranium dioxide UO2+x is carried out using LSDA+U method based on density functional theory. Accurate energetic information and charge transfers available so far are obtained. With these energies that have improved more than 50% over that of pure GGA and LDA, we show the density functional theory pr…
▽ More
A comprehensive investigation on point defects and their clustering behavior in nonstoichiometric uranium dioxide UO2+x is carried out using LSDA+U method based on density functional theory. Accurate energetic information and charge transfers available so far are obtained. With these energies that have improved more than 50% over that of pure GGA and LDA, we show the density functional theory predicts the predominance of oxygen defects over uranium ones at any compositions, which is possible only after treated the localized 5f electrons properly. Calculations also suggest an upper bound of x~0.03 for oxygen clusters to start off. The volume change induced by point uranium defects is monotonic but nonlinear, whereas for oxygen defects, increase x always reduces the system volume linearly, except dimers that require extra space for accommodation, which has been identified as meta-stable ionic molecule. Though oxygen dimers usually occupy Willis O'' sites and mimic a single oxygen in energetics and charge state, they are rare at ambient conditions. Its decomposition process and vibrational properties have been studied carefully. To obtain a general clustering mechanism in anion-excess fluorites systematically, we also analyze the local stabilities of possible basic clustering modes of oxygen defects. The result shows an unified way to understand the structure of Willis type and cuboctahedral clusters in UO2+x and beta-U4O9. Finally we generalize the point defect model to the independent clusters approximation to include clustering effects, the impact on defect populations is discussed.
△ Less
Submitted 11 June, 2008;
originally announced June 2008.
-
Evolution of Massive Blackhole Triples II -- The effect of the BH triples dynamics on the structure of the galactic nuclear
Authors:
Masaki Iwasawa,
Yoko Funato,
Junichiro Makino
Abstract:
In this paper, we investigate the structures of galaxies which either have or have had three BHs using $N$-body simulations, and compare them with those of galaxies with binary BHs. We found that the cusp region of a galaxy which have (or had) triple BHs is significantly larger and less dense than that of a galaxy with binary BHs of the same mass. Moreover, the size of the cusp region depends st…
▽ More
In this paper, we investigate the structures of galaxies which either have or have had three BHs using $N$-body simulations, and compare them with those of galaxies with binary BHs. We found that the cusp region of a galaxy which have (or had) triple BHs is significantly larger and less dense than that of a galaxy with binary BHs of the same mass. Moreover, the size of the cusp region depends strongly on the evolution history of triple BHs, while in the case of binary BHs, the size of the cusp is determined by the mass of the BHs. In galaxies which have (or had) three BHs, there is a region with significant radial velocity anisotropy, while such a region is not observed in galaxies with binary BH. These differences come from the fact that with triple BHs the energy deposit to the central region of the galaxy can be much larger due to multiple binary-single BH scatterings. Our result suggests that we can discriminate between galaxies which experienced triple BH interactions with those which did not, through the observable signatures such as the cusp size and velocity anisotropy.
△ Less
Submitted 6 January, 2008;
originally announced January 2008.
-
Evolution of Star Clusters near the Galactic Center: Fully Self-consistent N-body Simulations
Authors:
M. Fujii,
M. Iwasawa,
Y. Funato,
J. Makino
Abstract:
We have performed fully self-consistent $N$-body simulations of star clusters near the Galactic center (GC). Such simulations have not been performed because it is difficult to perform fast and accurate simulations of such systems using conventional methods. We used the Bridge code, which integrates the parent galaxy using the tree algorithm and the star cluster using the fourth-order Hermite sc…
▽ More
We have performed fully self-consistent $N$-body simulations of star clusters near the Galactic center (GC). Such simulations have not been performed because it is difficult to perform fast and accurate simulations of such systems using conventional methods. We used the Bridge code, which integrates the parent galaxy using the tree algorithm and the star cluster using the fourth-order Hermite scheme with individual timestep. The interaction between the parent galaxy and the star cluster is calculate with the tree algorithm. Therefore, the Bridge code can handle both the orbital and internal evolutions of star clusters correctly at the same time. We investigated the evolution of star clusters using the Bridge code and compared the results with previous studies. We found that 1) the inspiral timescale of the star clusters is shorter than that obtained with "traditional" simulations, in which the orbital evolution of star clusters is calculated analytically using the dynamical friction formula and 2) the core collapse of the star cluster increases the core density and help the cluster survive. The initial conditions of star clusters is not so severe as previously suggested.
△ Less
Submitted 8 July, 2008; v1 submitted 28 August, 2007;
originally announced August 2007.
-
BRIDGE: A Direct-tree Hybrid N-body Algorithm for Fully Self-consistent Simulations of Star Clusters and their Parent Galaxies
Authors:
M. Fujii,
M. Iwasawa,
Y. Funato,
J. Makino
Abstract:
We developed a new direct-tree hybrid N-body algorithm for fully self-consistent N-body simulations of star clusters in their parent galaxies. In such simulations, star clusters need high accuracy, while galaxies need a fast scheme because of the large number of the particles required to model it. In our new algorithm, the internal motion of the star cluster is calculated accurately using the di…
▽ More
We developed a new direct-tree hybrid N-body algorithm for fully self-consistent N-body simulations of star clusters in their parent galaxies. In such simulations, star clusters need high accuracy, while galaxies need a fast scheme because of the large number of the particles required to model it. In our new algorithm, the internal motion of the star cluster is calculated accurately using the direct Hermite scheme with individual timesteps and all other motions are calculated using the tree code with second-order leapfrog integrator. The direct and tree schemes are combined using an extension of the mixed variable symplectic (MVS) scheme. Thus, the Hamiltonian corresponding to everything other than the internal motion of the star cluster is integrated with the leapfrog, which is symplectic. Using this algorithm, we performed fully self-consistent N-body simulations of star clusters in their parent galaxy. The internal and orbital evolutions of the star cluster agreed well with those obtained using the direct scheme. We also performed fully self-consistent N-body simulation for large-N models ($N=2\times 10^6$). In this case, the calculation speed was seven times faster than what would be if the direct scheme was used.
△ Less
Submitted 27 July, 2007; v1 submitted 14 June, 2007;
originally announced June 2007.
-
Evolution of Massive Blackhole Triples I -- Equal-mass binary-single systems
Authors:
Masaki Iwasawa,
Yoko Funato,
Junichiro Makino
Abstract:
We present the result of $N$-body simulations of dynamical evolution of triple massive blackhole (BH) systems in galactic nuclei. We found that in most cases two of the three BHs merge through gravitational wave (GW) radiation in the timescale much shorter than the Hubble time, before ejecting one BH through a slingshot. In order for a binary BH to merge before ejecting out the third one, it has…
▽ More
We present the result of $N$-body simulations of dynamical evolution of triple massive blackhole (BH) systems in galactic nuclei. We found that in most cases two of the three BHs merge through gravitational wave (GW) radiation in the timescale much shorter than the Hubble time, before ejecting one BH through a slingshot. In order for a binary BH to merge before ejecting out the third one, it has to become highly eccentric since the gravitational wave timescale would be much longer than the Hubble time unless the eccentricity is very high. We found that two mechanisms drive the increase of the eccentricity of the binary. One is the strong binary-single BH interaction resulting in the thermalization of the eccentricity. The second is the Kozai mechanism which drives the cyclic change of the inclination and eccentricity of the inner binary of a stable hierarchical triple system. Our result implies that many of supermassive blackholes are binaries.
△ Less
Submitted 14 November, 2005;
originally announced November 2005.
