-
On the occurrence of buoyancy-induced oscillatory growth instability in directional solidification of alloys
Authors:
Josep Maria Barbera,
Thomas Isensee,
Damien Tourret
Abstract:
Recent solidification experiments identified an oscillatory growth instability during directional solidification of Ni-based superalloy CMSX4 under a given range of cooling rates. From a modeling perspective, the quantitative simulation of dendritic growth under convective conditions remains challenging, due to the multiple length scales involved. Using the dendritic needle network (DNN) model, co…
▽ More
Recent solidification experiments identified an oscillatory growth instability during directional solidification of Ni-based superalloy CMSX4 under a given range of cooling rates. From a modeling perspective, the quantitative simulation of dendritic growth under convective conditions remains challenging, due to the multiple length scales involved. Using the dendritic needle network (DNN) model, coupled with an efficient Navier-Stokes solver, we reproduced the buoyancy-induced growth oscillations observed in CMSX4 directional solidification. These previous results have shown that, for a given alloy and temperature gradient, oscillations occur in a narrow range of cooling rates (or pulling velocity, $V_p$) and that the selected primary dendrite arm spacing ($Λ$) plays a crucial role in the activation of the flow leading to oscillations. Here, we show that the oscillatory behavior may be generalized to other binary alloys within an appropriate range of $(V_p,Λ)$ by reproducing it for an Al-4at.%Cu alloy. We perform a mapping of oscillatory states as a function of $V_p$ and $Λ$, and identify the regions of occurrence of different behaviors (e.g., sustained or damped oscillations) and their effect on the oscillation characteristics. Our results suggest a minimum of $V_p$ for the occurrence of oscillations and confirm the correlation between the oscillation type (namely: damped, sustained, or noisy) with the ratio of average fluid velocity $\overline V$ over $V_p$. We describe the different observed growth regimes and highlight similarities and contrasts with our previous results for a CMSX4 alloy.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Convective effects on columnar dendritic solidification -- A multiscale dendritic needle network study
Authors:
Thomas Isensee,
Damien Tourret
Abstract:
Gravity-induced buoyancy, inevitable in most solidification processes, substantially alters the dynamics of crystal growth, such that incorporating fluid flow in solidification models is crucial to understand and predict key aspects of microstructure selection. Here, we present a multi-scale Dendritic Needle Network (DNN) model for directional solidification that includes buoyant flow in the liqui…
▽ More
Gravity-induced buoyancy, inevitable in most solidification processes, substantially alters the dynamics of crystal growth, such that incorporating fluid flow in solidification models is crucial to understand and predict key aspects of microstructure selection. Here, we present a multi-scale Dendritic Needle Network (DNN) model for directional solidification that includes buoyant flow in the liquid, and apply it to a range of alloys and growth conditions. After a brief presentation of the model, we study the selection of stable primary dendrite arm spacings in Al-4at.%Cu and in Ti-45at.%Al alloys under different gravity levels, comparing both applications to published phase-field results and experimental measurements. Then, we simulate the oscillatory growth behavior recently reported via X-ray in situ imaging of directional solidification of nickel-based superalloy CMSX-4. In this last application, the DNN simulations manage to reproduce the oscillatory growth behavior, and hence permit identifying the fundamental mechanisms behind the oscillatory growth regime. In particular, we show that sustained oscillations occur when the average liquid flow velocity is close to the crystal growth velocity, and that primary dendritic spacings also play a crucial role in the oscillatory behavior.
△ Less
Submitted 8 August, 2022; v1 submitted 16 May, 2022;
originally announced May 2022.
-
Multiscale simulation of powder-bed fusion processing of metallic alloys
Authors:
S. M. Elahi,
R. Tavakoli,
A. K. Boukellal,
T. Isensee,
I. Romero,
D. Tourret
Abstract:
We present a computational framework for the simulations of powder-bed fusion of metallic alloys, which combines: (1) CalPhaD calculations of temperature-dependent alloy properties and phase diagrams, (2) macroscale finite element (FE) thermal simulations of the material addition and fusion, and (3) microscopic phase-field (PF) simulations of solidification in the melt pool. The methodology is app…
▽ More
We present a computational framework for the simulations of powder-bed fusion of metallic alloys, which combines: (1) CalPhaD calculations of temperature-dependent alloy properties and phase diagrams, (2) macroscale finite element (FE) thermal simulations of the material addition and fusion, and (3) microscopic phase-field (PF) simulations of solidification in the melt pool. The methodology is applied to simulate the selective laser melting (SLM) of an Inconel 718 alloy using realistic processing parameters. We discuss the effect of temperature-dependent properties and the importance of accounting for different properties between the powder bed and the dense material in the macroscale thermal simulations. Using a two-dimensional longitudinal slice of the thermal field calculated via FE simulations, we perform an appropriately-converged PF solidification simulation at the scale of the entire melt pool, resulting in a calculation with over one billion grid points, yet performed on a single cluster node with eight graphics processing units (GPUs). These microscale simulations provide new insight into the grain texture selection via polycrystalline growth competition under realistic SLM conditions, with a level of detail down to individual dendrites.
△ Less
Submitted 19 March, 2022;
originally announced March 2022.
-
Multiscale prediction of microstructure length scales in metallic alloy casting
Authors:
B. Bellón,
A. K. Boukellal,
T. Isensee,
O. M. Wellborn,
K. P. Trumble,
M. J. M. Krane,
M. S. Titus,
D. Tourret,
J. LLorca
Abstract:
In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, a…
▽ More
In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, and they were compared to spacing stability ranges and average spacings in dendritic arrays simulated using phase-field (PF) and dendritic needle network (DNN) models. It is first shown that PF and DNN lead to similar results for the Al-1\,wt\%Cu alloy, using a dendrite tip selection constant calculated with PF in the DNN simulations. PF simulations cannot achieve quantitative predictions for the Al-4\,wt\%Cu alloy because they are too computationally demanding due to the large separation of scale between tip radius and diffusion length, a characteristic feature of non-dilute alloys. Nevertheless, the results of DNN simulations for non-dilute Al-Cu alloys are in overall good agreement with our experimental results as well as with those of an extensive literature review. Simulations consistently suggest a widening of the PDAS stability range with a decrease of the temperature gradient as the microstructure goes from cellular-dendrites to well-developed hierarchical dendrites.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
Three-dimensional needle network model for dendritic growth with fluid flow
Authors:
Thomas Isensee,
Damien Tourret
Abstract:
We present a first implementation of the Dendritic Needle Network (DNN) model for dendritic crystal growth in three dimensions including convective transport in the melt. The numerical solving of the Navier-Stokes equations is performed with finite differences and is validated by comparison with a classical benchmark in fluid mechanics for unsteady flow. We compute the growth behavior of a single…
▽ More
We present a first implementation of the Dendritic Needle Network (DNN) model for dendritic crystal growth in three dimensions including convective transport in the melt. The numerical solving of the Navier-Stokes equations is performed with finite differences and is validated by comparison with a classical benchmark in fluid mechanics for unsteady flow. We compute the growth behavior of a single equiaxed crystal under a forced convective flow. As expected, the resulting dendrite morphology differs strongly from the case of the purely diffusive regime and from similar two-dimensional simulations. The resulting computationally efficient simulations open the way to studying mechanisms of microstructure selection in presence of fluid flow, using realistic alloys and process parameters.
△ Less
Submitted 17 June, 2020; v1 submitted 11 March, 2020;
originally announced March 2020.
