Characterization of NbTi wires for the electron-ion collider project
Authors:
Jun Lu,
Jeremy Levitan Noah Gavin,
Aniket Ingrole,
Holger Witte,
Peng Xu,
Ye Bai
Abstract:
The Electron-Ion Collider (EIC) is a proposed machine to explore the behaviour of the fundamental particles and forces that bind atomic nuclei together. The design and construction of the EIC are underway at Brookhaven National Laboratory in collaboration with Thomas Jefferson National Accelerator Facility. EIC will use several different types of superconducting strands for magnets near the intera…
▽ More
The Electron-Ion Collider (EIC) is a proposed machine to explore the behaviour of the fundamental particles and forces that bind atomic nuclei together. The design and construction of the EIC are underway at Brookhaven National Laboratory in collaboration with Thomas Jefferson National Accelerator Facility. EIC will use several different types of superconducting strands for magnets near the interaction region (IR). At beam injection, the magnetic field is usually very low compared with its maximum operating field. This usually creates considerable field errors mainly generated from magnetization current in superconducting strands even using very fine filament. The accurate magnetization measurement results from those superconducting strands will be critical for the calculation and future correction of magnetic field for EIC. In this work, we characterized three billets of superconductor NbTi strands. The magnetization was measured at 4.2 K and 1.9 K in magnetic fields below 1.5 T. The critical current at 4.2 K and in magnetic field down to 5 T were also measured. Other properties that are important for the safety margin of superconducting magnet fabrication, operation, and quench protection such as residual-resistance-ratio (RRR), filament diameter, Cu to non-Cu ratio, twist pitch, and mechanical properties at 77 K will also be presented.
△ Less
Submitted 5 June, 2025;
originally announced June 2025.
Role of microstructure on flux expulsion of superconducting radio frequency cavities
Authors:
B. D. Khanal,
S. Balachandran,
S. Chetri,
M. Barron,
R. Mullinix,
A. Williams,
P. Xu,
A. Ingrole,
P. J. Lee,
G. Ciovati,
P. Dhakal
Abstract:
The trapped residual magnetic flux during the cool-down due to the incomplete Meissner state is a significant source of radio frequency losses in superconducting radio frequency (SRF) cavities. Here, we show a clear correlation between the niobium microstructure in elliptical cavity geometry and flux expulsion behavior. In particular, a traditionally fabricated Nb cavity half cell from an annealed…
▽ More
The trapped residual magnetic flux during the cool-down due to the incomplete Meissner state is a significant source of radio frequency losses in superconducting radio frequency (SRF) cavities. Here, we show a clear correlation between the niobium microstructure in elliptical cavity geometry and flux expulsion behavior. In particular, a traditionally fabricated Nb cavity half cell from an annealed poly-crystalline Nb sheet after an 800 $^\circ$C heat treatment leads to a bi-modal microstructure that ties in with flux trapping and inefficient flux expulsion. This non-uniform microstructure is related to varying strain profiles along the cavity shape. A novel approach to prevent this non uniform microstructure is presented by fabricating a 1.3 GHz single cell Nb cavity with a cold-worked sheet and subsequent heat treatment leading to better flux expulsion after 800 $^\circ$C/3 h. Microstructural evolution by electron backscattered diffraction-orientation imaging microscopy on cavity cutouts, and flux pinning behavior by dc-magnetization on coupon samples confirms a reduction in flux pinning centers with increased heat treatment temperature. The heat treatment temperature dependent mechanical properties and thermal conductivity are reported. The significant impact of cold-work in this study demonstrates clear evidence for the importance of microstructure required for high-performance superconducting cavities with reduced losses caused by magnetic flux trapping.
△ Less
Submitted 3 October, 2024;
originally announced October 2024.
