-
Fibonacci terahertz imaging by silicon diffractive optics
Authors:
Domas Jokubauskis,
Linas Minkevičius,
Mindaugas Karaliūnas,
Simonas Indrišiūnas,
Irmantas Kašalynas,
Gediminas Račiukaitis,
Gintaras Valušis
Abstract:
Fibonacci or bifocal terahertz (THz) imaging is demonstrated experimentally employing silicon diffractive zone plate (SDZP) in a continuous wave mode. Images simultaneously recorded in two different planes are exhibited at 0.6 THz frequency with the spatial resolution of wavelength. Multi-focus imaging operation of the Fibonacci lens is compared with a performance of the conventional silicon phase…
▽ More
Fibonacci or bifocal terahertz (THz) imaging is demonstrated experimentally employing silicon diffractive zone plate (SDZP) in a continuous wave mode. Images simultaneously recorded in two different planes are exhibited at 0.6 THz frequency with the spatial resolution of wavelength. Multi-focus imaging operation of the Fibonacci lens is compared with a performance of the conventional silicon phase zone plate. Spatial profiles and focal depth features are discussed varying the frequency from 0.3 THz to 0.6 THz. Good agreement between experimental results and simulation data is revealed.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Direct and High-Throughput Fabrication of Mie-Resonant Metasurfaces via Single-Pulse Laser Interference
Authors:
Jonas Berzinš,
Simonas Indrišiūnas,
Koen van Erve,
Arvind Nagarajan,
Stefan Fasold,
Michael Steinert,
Giampiero Gerini,
Paulius Gečys,
Thomas Pertsch,
Stefan M. B. Bäumer,
Frank Setzpfandt
Abstract:
High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silico…
▽ More
High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silicon film into an array of Mie resonators. The proposed technique is based on laser-interference-induced dewetting. A precise control of the laser pulse energy enables the fabrication of ordered dielectric metasurfaces in areas spanning tens of micrometers and consisting of thousands of hemispherical nanoparticles with a single laser shot. The fabricated nanoparticles exhibit a wavelength-dependent optical response with a strong electric dipole signature. Variation of the pre-deposited silicon film thickness allows tailoring of the resonances in the targeted visible and infrared spectral ranges. Such direct and high-throughput fabrication paves the way towards a simple realization of spatially invariant metasurface-based devices.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Laser-Induced Spatially-Selective Tailoring of High-Index Dielectric Metasurfaces
Authors:
Jonas Berzinš,
Simonas Indrišiūnas,
Stefan Fasold,
Michael Steinert,
Olga Žukovskaja,
Dana Cialla-May,
Paulius Gečys,
Stefan M. B. Bäumer,
Thomas Pertsch,
Frank Setzpfandt
Abstract:
Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effe…
▽ More
Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effects: crystallization and reshaping, while the heat is localized by a high-precision positioning of the focused laser beam. Moreover, for the first time, the resonant behavior of dielectric metasurface elements is exploited to engineer a specific absorption profile, which leads to a spatially-selective heating and a customized modification. Such technique has a potential to reduce the complexity in the fabrication of non-uniform metasurface-based optical elements. Two distinct cases, a spatial pixelation of a large-scale metasurface and a height modification of metasurface elements, are explicitly demonstrated.
△ Less
Submitted 11 October, 2019; v1 submitted 11 July, 2019;
originally announced July 2019.
