-
Viscoelastic materials are most energy efficient when loaded and unloaded at equal rates
Authors:
Lucien Tsai,
Paco Navarro,
Siqi Wu,
Talyor Levinson,
Elizabeth Mendoza,
M. Janneke Schwaner,
Monica A. Daley,
Emanuel Azizi,
Mark Ilton
Abstract:
Biological springs can be used in nature for energy conservation and ultra-fast motion. The loading and unloading rates of elastic materials can play an important role in determining how the properties of these springs affect movements. We investigate the mechanical energy efficiency of biological springs (American bullfrog plantaris tendons and guinea fowl lateral gastrocnemius tendons) and synth…
▽ More
Biological springs can be used in nature for energy conservation and ultra-fast motion. The loading and unloading rates of elastic materials can play an important role in determining how the properties of these springs affect movements. We investigate the mechanical energy efficiency of biological springs (American bullfrog plantaris tendons and guinea fowl lateral gastrocnemius tendons) and synthetic elastomers. We measure these materials under symmetric rates (equal loading and unloading durations) and asymmetric rates (unequal loading and unloading durations) using novel dynamic mechanical analysis measurements. We find that mechanical efficiency is highest at symmetric rates and significantly decreases with a larger degree of asymmetry. A generalized 1D Maxwell model with no fitting parameters captures the experimental results based on the independently-characterized linear viscoelastic properties of the materials. The model further shows that a broader viscoelastic relaxation spectrum enhances the effect of rate-asymmetry on efficiency. Overall, our study provides valuable insights into the interplay between material properties and unloading dynamics in both biological and synthetic elastic systems.
△ Less
Submitted 21 November, 2023; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Rigidity results for Riemann solitons
Authors:
Tokura Willian,
Barboza Marcelo,
Batista Elismar,
Menezes Ilton
Abstract:
In this paper we take a look at conditions that make a Riemann soliton trivial, compacity being one of them. We also show that the behaviour at infinity of the gradient field of a non-compact gradient Riemann soliton might cause the soliton to be an Einstein manifold. Finally, we obtain scalar curvature estimates for complete shrinking or steady gradient Riemann solitons whose scalar curvature is…
▽ More
In this paper we take a look at conditions that make a Riemann soliton trivial, compacity being one of them. We also show that the behaviour at infinity of the gradient field of a non-compact gradient Riemann soliton might cause the soliton to be an Einstein manifold. Finally, we obtain scalar curvature estimates for complete shrinking or steady gradient Riemann solitons whose scalar curvature is bounded from below at infinity.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Size-scaling limits of impulsive elastic energy release from a resilin-like elastomer
Authors:
Mark Ilton,
S. M. Cox,
Thijs Egelmeers,
Gregory P. Sutton,
S. N. Patek,
Alfred J. Crosby
Abstract:
Elastically-driven motion has been used as a strategy to achieve high speeds in small organisms and engineered micro-robotic devices. We examine the size-scaling relations determining the limit of elastic energy release from elastomer bands with mechanical properties similar to the biological protein resilin. The maximum center-of-mass velocity of the elastomer bands was found to be size-scale ind…
▽ More
Elastically-driven motion has been used as a strategy to achieve high speeds in small organisms and engineered micro-robotic devices. We examine the size-scaling relations determining the limit of elastic energy release from elastomer bands with mechanical properties similar to the biological protein resilin. The maximum center-of-mass velocity of the elastomer bands was found to be size-scale independent, while smaller bands demonstrated larger accelerations and shorter durations of elastic energy release. Scaling relationships determined from these measurements are consistent with the performance of small organisms which utilize elastic elements to power motion. Engineered devices found in the literature do not follow the same size-scaling relationships, which suggests an opportunity for improved design of engineered devices.
△ Less
Submitted 7 May, 2018; v1 submitted 13 November, 2017;
originally announced November 2017.
-
Adsorption-Induced Slip Inhibition for Polymer Melts on Ideal Substrates
Authors:
Mark Ilton,
Thomas Salez,
Paul D. Fowler,
Marco Rivetti,
Mohammed Aly,
Michael Benzaquen,
Joshua D. McGraw,
Elie Raphaël,
Kari Dalnoki-Veress,
Oliver Bäumchen
Abstract:
Hydrodynamic slip of a liquid at a solid surface represents a fundamental phenomenon in fluid dynamics that governs liquid transport at small scales. For polymeric liquids, de Gennes predicted that the Navier boundary condition together with the theory of polymer dynamics imply extraordinarily large interfacial slip for entangled polymer melts on ideal surfaces; this Navier-de Gennes model was con…
▽ More
Hydrodynamic slip of a liquid at a solid surface represents a fundamental phenomenon in fluid dynamics that governs liquid transport at small scales. For polymeric liquids, de Gennes predicted that the Navier boundary condition together with the theory of polymer dynamics imply extraordinarily large interfacial slip for entangled polymer melts on ideal surfaces; this Navier-de Gennes model was confirmed using dewetting experiments on ultra-smooth, low-energy substrates. Here, we use capillary leveling - surface tension driven flow of films with initially non-uniform thickness - of polymeric films on these same substrates. Measurement of the slip length from a robust one-parameter fit to a lubrication model is achieved. We show that at the lower shear rates involved in leveling experiments as compared to dewetting ones, the employed substrates can no longer be considered ideal. The data is instead consistent with physical adsorption of polymer chains at the solid/liquid interface. We extend the Navier-de Gennes description using one additional parameter, namely the density of physically adsorbed chains per unit surface. The resulting formulation is found to be in excellent agreement with the experimental observations.
△ Less
Submitted 22 December, 2017; v1 submitted 10 August, 2017;
originally announced August 2017.
-
Direct measurement of the critical pore size in a model membrane
Authors:
Mark Ilton,
Christian DiMaria,
Kari Dalnoki-Veress
Abstract:
We study pore nucleation in a model membrane system, a freestanding polymer film. Nucleated pores smaller than a critical size close, while pores larger than the critical size grow. Holes of varying size were purposefully prepared in liquid polymer films, and their evolution in time was monitored using optical and atomic force microscopy to extract a critical radius. The critical radius scales lin…
▽ More
We study pore nucleation in a model membrane system, a freestanding polymer film. Nucleated pores smaller than a critical size close, while pores larger than the critical size grow. Holes of varying size were purposefully prepared in liquid polymer films, and their evolution in time was monitored using optical and atomic force microscopy to extract a critical radius. The critical radius scales linearly with film thickness for a homopolymer film. The results agree with a simple model which takes into account the energy cost due to surface area at the edge of the pore. The energy cost at the edge of the pore is experimentally varied by using a lamellar-forming diblock copolymer membrane. The underlying molecular architecture causes increased frustration at the pore edge resulting in an enhanced cost of pore formation.
△ Less
Submitted 15 November, 2016;
originally announced November 2016.
-
Capillary levelling of free-standing liquid nanofilms
Authors:
Mark Ilton,
Miles M. P. Couchman,
Cedric Gerbelot,
Michael Benzaquen,
Paul D. Fowler,
Howard A. Stone,
Elie Raphaël,
Kari Dalnoki-Veress,
Thomas Salez
Abstract:
We report on the capillary-driven levelling of a topographical perturbation at the surface of a free-standing liquid nanofilm. The width of a stepped surface profile is found to evolve as the square root of time. The hydrodynamic model is in excellent agreement with the experimental data. In addition to exhibiting an analogy with diffusive processes, this novel system serves as a precise nanoprobe…
▽ More
We report on the capillary-driven levelling of a topographical perturbation at the surface of a free-standing liquid nanofilm. The width of a stepped surface profile is found to evolve as the square root of time. The hydrodynamic model is in excellent agreement with the experimental data. In addition to exhibiting an analogy with diffusive processes, this novel system serves as a precise nanoprobe for the rheology of liquids at interfaces in a configuration that avoids substrate effects.
△ Less
Submitted 5 September, 2016; v1 submitted 17 February, 2016;
originally announced February 2016.
-
Symmetry Plays a Key Role in the Erasing of Patterned Surface Features
Authors:
Michael Benzaquen,
Mark Ilton,
Michael V. Massa,
Thomas Salez,
Paul Fowler,
Elie Raphaël,
Kari Dalnoki-Veress
Abstract:
We report on how the relaxation of patterns prepared on a thin film can be controlled by manipu- lating the symmetry of the initial shape. The validity of a lubrication theory for the capillary-driven relaxation of surface profiles is verified by atomic force microscopy measurements, performed on films that were patterned using focused laser spike annealing. In particular, we observe that the shap…
▽ More
We report on how the relaxation of patterns prepared on a thin film can be controlled by manipu- lating the symmetry of the initial shape. The validity of a lubrication theory for the capillary-driven relaxation of surface profiles is verified by atomic force microscopy measurements, performed on films that were patterned using focused laser spike annealing. In particular, we observe that the shape of the surface profile at late times is entirely determined by the initial symmetry of the perturba- tion, in agreement with the theory. Moreover, in this regime the perturbation amplitude relaxes as a power-law in time, with an exponent that is also related to the initial symmetry. The results have relevance in the dynamical control of topographic perturbations for nanolithography and high density memory storage.
△ Less
Submitted 30 March, 2015;
originally announced March 2015.
-
Inhomogeneous Magnetic-Field Response of YBa2Cu3Oy and La2-xSrxCuO4 Persisting above the Bulk Superconducting Transition Temperature
Authors:
J. E. Sonier,
M. Ilton,
V. Pacradouni,
C. V. Kaiser,
S. A. Sabok-Sayr,
Y. Ando,
S. Komiya,
W. N. Hardy,
D. A. Bonn,
R. Liang,
W. A. Atkinson
Abstract:
We report that in YBa2Cu3Oy and La2-xSrxCuO4 there is a spatially inhomogeneous response to magnetic field for temperatures T extending well above the bulk superconducting transition temperature Tc. An inhomogeneous magnetic response is observed above Tc even in ortho-II YBa2Cu3O6.50, which has highly ordered doping. The degree of the field inhomogeneity above Tc tracks the hole doping dependenc…
▽ More
We report that in YBa2Cu3Oy and La2-xSrxCuO4 there is a spatially inhomogeneous response to magnetic field for temperatures T extending well above the bulk superconducting transition temperature Tc. An inhomogeneous magnetic response is observed above Tc even in ortho-II YBa2Cu3O6.50, which has highly ordered doping. The degree of the field inhomogeneity above Tc tracks the hole doping dependences of both Tc and the density of the superconducting carriers below Tc, and therefore is apparently coupled to superconductivity.
△ Less
Submitted 29 September, 2008; v1 submitted 22 January, 2008;
originally announced January 2008.
