Showing 1–50 of 56 results for author: Hutchinson, J

Prototype acoustic positioning system for the Pacific Ocean Neutrino Experiment

Authors: P-ONE Collaboration, :, M. Agostini, S. Agreda, A. Alexander Wight, P. S. Barbeau, A. J. Baron, S. Bash, C. Bellenghi, B. Biffard, M. Boehmer, M. Brandenburg, P. Bunton, N. Cedarblade-Jones, M. Charlton, B. Crudele, M. Danninger, T. DeYoung, F. Fuchs, A. Gärtner, J. Garriz, D. Ghuman, L. Ginzkey, T. Glukler, V. Gousy-Leblanc , et al. (57 additional authors not shown)

Abstract: We present the design and initial performance characterization of the prototype acoustic positioning system intended for the Pacific Ocean Neutrino Experiment. It comprises novel piezo-acoustic receivers with dedicated filtering- and amplification electronics installed in P-ONE instruments and is complemented by a commercial system comprised of cabled and autonomous acoustic pingers for sub-sea in… ▽ More We present the design and initial performance characterization of the prototype acoustic positioning system intended for the Pacific Ocean Neutrino Experiment. It comprises novel piezo-acoustic receivers with dedicated filtering- and amplification electronics installed in P-ONE instruments and is complemented by a commercial system comprised of cabled and autonomous acoustic pingers for sub-sea installation manufactured by Sonardyne Ltd. We performed an in-depth characterization of the acoustic receiver electronics and their acoustic sensitivity when integrated into P-ONE pressure housings. These show absolute sensitivities of up to $-125\,$dB re V$^2/μ$Pa$^2$ in a frequency range of $10-40\,$kHz. We furthermore conducted a positioning measurement campaign in the ocean by deploying three autonomous acoustic pingers on the seafloor, as well as a cabled acoustic interrogator and a P-ONE prototype module deployed from a ship. Using a simple peak-finding detection algorithm, we observe high accuracy in the tracking of relative ranging times at approximately $230-280\,μ$s at distances of up to $1600\,$m, which is sufficient for positioning detectors in a cubic-kilometer detector and which can be further improved with more involved detection algorithms. The tracking accuracy is further confirmed by independent ranging of the Sonardyne system and closely follows the ship's drift in the wind measured by GPS. The absolute positioning shows the same tracking accuracy with its absolute precision only limited by the large uncertainties of the deployed pinger positions on the seafloor. △ Less

Submitted 22 May, 2025; v1 submitted 17 April, 2025; originally announced April 2025.

Comments: added reference; accepted by JINST

Introduction to dimensional reduction of fermions

Authors: Joel Hutchinson, Dmitry Miserev, Daniel Loss, Jelena Klinovaja

Abstract: We present a comprehensive pedagogical introduction to the dimensional reduction protocol (DRP), a versatile framework for analyzing instabilities and critical points in interacting fermionic systems. The DRP simplifies the study of many-body problems by systematically reducing their effective spatial dimension while retaining essential physics. This method works for electron gases in a diverse ar… ▽ More We present a comprehensive pedagogical introduction to the dimensional reduction protocol (DRP), a versatile framework for analyzing instabilities and critical points in interacting fermionic systems. The DRP simplifies the study of many-body problems by systematically reducing their effective spatial dimension while retaining essential physics. This method works for electron gases in a diverse array of settings: in any number of spatial dimensions, in the presence of Zeeman fields, with spin-orbit coupling, including repulsive or attractive interactions. Focusing on two-point correlation functions, the DRP identifies a minimal subspace relevant for capturing analytic properties, facilitating efficient computation of critical phenomena in electronic systems. This work outlines the assumptions, proof, and applications of the DRP, emphasizing its simplicity and broad applicability for future studies in correlated electron physics. △ Less

Submitted 2 April, 2025; originally announced April 2025.

Comments: 11 pages, 10 figures

High-Temperature Superconductivity from Finite-Range Attractive Interaction

Authors: Dmitry Miserev, Joel Hutchinson, Herbert Schoeller, Jelena Klinovaja, Daniel Loss

Abstract: In this letter we consider $D$-dimensional interacting Fermi liquids, and demonstrate that an attractive interaction with a finite range $R_s$ that is much greater than the Fermi wavelength $λ_F$ breaks the conventional BCS theory of superconductivity. In contrast to the BCS prediction of a finite superconducting gap for all attractive contact interactions, we show that a finite-range interaction… ▽ More In this letter we consider $D$-dimensional interacting Fermi liquids, and demonstrate that an attractive interaction with a finite range $R_s$ that is much greater than the Fermi wavelength $λ_F$ breaks the conventional BCS theory of superconductivity. In contrast to the BCS prediction of a finite superconducting gap for all attractive contact interactions, we show that a finite-range interaction does not induce a superconducting gap. Instead, the pair susceptibility develops a power-law singularity at zero momentum and zero frequency signaling quantum critical behavior without long-range ordering. Starting from this, we show that superconductivity can be stabilized by adding a short-range attractive interaction, which is always present in real electronic systems. As an example, we consider a layered quasi-two-dimensional material with attractive electron-electron interactions mediated by optical phonons. We demonstrate a dome shape of the critical temperature $T_c$ versus doping, strongly suppressed isotope effect, and a weak dependence of the optimal doping and maximal $T_c^* \sim 0.1 E_F$ on the interaction range at $R_s \gg λ_F$, $E_F$ is the Fermi energy. We believe that these results could be relevant to high-temperature superconductors. △ Less

Submitted 17 February, 2025; originally announced February 2025.

ICT Sector Greenhouse Gas Emissions -- Issues and Trends

Authors: Peter Garraghan, John Hutchinson, Adrian Friday

Abstract: As Information and Communication Technology (ICT) use has become more prevalent, there has been a growing concern in how its associated greenhouse gas emissions will impact the climate. Estimating such ICT emissions is a difficult undertaking due to its complexity, its rapidly changing nature, and the lack of accurate and up-to-date data on individual stakeholder emissions. In this paper we provid… ▽ More As Information and Communication Technology (ICT) use has become more prevalent, there has been a growing concern in how its associated greenhouse gas emissions will impact the climate. Estimating such ICT emissions is a difficult undertaking due to its complexity, its rapidly changing nature, and the lack of accurate and up-to-date data on individual stakeholder emissions. In this paper we provide a framework for estimating ICT's carbon footprint and identify some of the issues that impede the task. We attempt to gain greater insight into the factors affecting the ICT sector by drawing on a number of interviews with industry experts. We conclude that more accurate emissions estimates will only be possible with a more more detailed, industry informed, understanding of the whole ICT landscape and much more transparent reporting of energy usage and emissions data by ICT stakeholders. △ Less

Submitted 22 October, 2024; originally announced October 2024.

The GeometricKernels Package: Heat and Matérn Kernels for Geometric Learning on Manifolds, Meshes, and Graphs

Authors: Peter Mostowsky, Vincent Dutordoir, Iskander Azangulov, Noémie Jaquier, Michael John Hutchinson, Aditya Ravuri, Leonel Rozo, Alexander Terenin, Viacheslav Borovitskiy

Abstract: Kernels are a fundamental technical primitive in machine learning. In recent years, kernel-based methods such as Gaussian processes are becoming increasingly important in applications where quantifying uncertainty is of key interest. In settings that involve structured data defined on graphs, meshes, manifolds, or other related spaces, defining kernels with good uncertainty-quantification behavior… ▽ More Kernels are a fundamental technical primitive in machine learning. In recent years, kernel-based methods such as Gaussian processes are becoming increasingly important in applications where quantifying uncertainty is of key interest. In settings that involve structured data defined on graphs, meshes, manifolds, or other related spaces, defining kernels with good uncertainty-quantification behavior, and computing their value numerically, is less straightforward than in the Euclidean setting. To address this difficulty, we present GeometricKernels, a software package which implements the geometric analogs of classical Euclidean squared exponential - also known as heat - and Matérn kernels, which are widely-used in settings where uncertainty is of key interest. As a byproduct, we obtain the ability to compute Fourier-feature-type expansions, which are widely used in their own right, on a wide set of geometric spaces. Our implementation supports automatic differentiation in every major current framework simultaneously via a backend-agnostic design. In this companion paper to the package and its documentation, we outline the capabilities of the package and present an illustrated example of its interface. We also include a brief overview of the theory the package is built upon and provide some historic context in the appendix. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Topological Interlayer Superconductivity in a van der Waals Heterostructure

Authors: Even Thingstad, Joel Hutchinson, Daniel Loss, Jelena Klinovaja

Abstract: We show that when a honeycomb antiferromagnetic insulator (AFMI) is sandwiched between two transition metal dichalcogenide (TMD) monolayers in a commensurate way, magnons in the AFMI can mediate an interaction between electrons in the TMDs that gives rise to interlayer Cooper pairing. This interaction opens coexisting extended $s$-wave and chiral $p$-wave superconducting gaps in the energy spectru… ▽ More We show that when a honeycomb antiferromagnetic insulator (AFMI) is sandwiched between two transition metal dichalcogenide (TMD) monolayers in a commensurate way, magnons in the AFMI can mediate an interaction between electrons in the TMDs that gives rise to interlayer Cooper pairing. This interaction opens coexisting extended $s$-wave and chiral $p$-wave superconducting gaps in the energy spectrum of the coupled system, and the latter give rise to topological Majorana edge modes. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 13 pages, including 5 pages supplemental material

Journal ref: Phys. Rev. B 111, L060505 (2025)

Automated Long Answer Grading with RiceChem Dataset

Authors: Shashank Sonkar, Kangqi Ni, Lesa Tran Lu, Kristi Kincaid, John S. Hutchinson, Richard G. Baraniuk

Abstract: We introduce a new area of study in the field of educational Natural Language Processing: Automated Long Answer Grading (ALAG). Distinguishing itself from Automated Short Answer Grading (ASAG) and Automated Essay Grading (AEG), ALAG presents unique challenges due to the complexity and multifaceted nature of fact-based long answers. To study ALAG, we introduce RiceChem, a dataset derived from a col… ▽ More We introduce a new area of study in the field of educational Natural Language Processing: Automated Long Answer Grading (ALAG). Distinguishing itself from Automated Short Answer Grading (ASAG) and Automated Essay Grading (AEG), ALAG presents unique challenges due to the complexity and multifaceted nature of fact-based long answers. To study ALAG, we introduce RiceChem, a dataset derived from a college chemistry course, featuring real student responses to long-answer questions with an average word count notably higher than typical ASAG datasets. We propose a novel approach to ALAG by formulating it as a rubric entailment problem, employing natural language inference models to verify whether each criterion, represented by a rubric item, is addressed in the student's response. This formulation enables the effective use of MNLI for transfer learning, significantly improving the performance of models on the RiceChem dataset. We demonstrate the importance of rubric-based formulation in ALAG, showcasing its superiority over traditional score-based approaches in capturing the nuances of student responses. We also investigate the performance of models in cold start scenarios, providing valuable insights into the practical deployment considerations in educational settings. Lastly, we benchmark state-of-the-art open-sourced Large Language Models (LLMs) on RiceChem and compare their results to GPT models, highlighting the increased complexity of ALAG compared to ASAG. Despite leveraging the benefits of a rubric-based approach and transfer learning from MNLI, the lower performance of LLMs on RiceChem underscores the significant difficulty posed by the ALAG task. With this work, we offer a fresh perspective on grading long, fact-based answers and introduce a new dataset to stimulate further research in this important area. Code: \url{https://github.com/luffycodes/Automated-Long-Answer-Grading}. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Mechanics and wrinkling patterns of pressurized bent tubes

Authors: Cesar L. Pastrana, Luyi Qiu, John W. Hutchinson, Ariel Amir, Ulrich Gerland

Abstract: Take a drinking straw and bend it from its ends. After sufficient bending, the tube buckles forming a kink, where the curvature is localized in a very small area. This instability, known generally as the Brazier effect, is inherent to thin-walled cylindrical shells, which are particularly ubiquitous in living systems, such as rod-shaped bacteria. However, tubular biological structures are often pr… ▽ More Take a drinking straw and bend it from its ends. After sufficient bending, the tube buckles forming a kink, where the curvature is localized in a very small area. This instability, known generally as the Brazier effect, is inherent to thin-walled cylindrical shells, which are particularly ubiquitous in living systems, such as rod-shaped bacteria. However, tubular biological structures are often pressurized, and the knowledge of the mechanical response upon bending in this scenario is limited. In this work, we use a computational model to study the mechanical response and the deformations as a result of bending pressurized tubes. In addition, we employ tension-field theory to describe the mechanical behaviour before and after the wrinkling transition. Furthermore, we investigate the development and evolution of wrinkle patterns beyond the instability, showing different wrinkled configurations. We discover the existence of a multi-wavelength mode following the purely sinusoidal wrinkles and anticipating the kinked configuration of the tube. △ Less

Submitted 10 April, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Comments: 5 pages, 4 figures

Particle Denoising Diffusion Sampler

Authors: Angus Phillips, Hai-Dang Dau, Michael John Hutchinson, Valentin De Bortoli, George Deligiannidis, Arnaud Doucet

Abstract: Denoising diffusion models have become ubiquitous for generative modeling. The core idea is to transport the data distribution to a Gaussian by using a diffusion. Approximate samples from the data distribution are then obtained by estimating the time-reversal of this diffusion using score matching ideas. We follow here a similar strategy to sample from unnormalized probability densities and comput… ▽ More Denoising diffusion models have become ubiquitous for generative modeling. The core idea is to transport the data distribution to a Gaussian by using a diffusion. Approximate samples from the data distribution are then obtained by estimating the time-reversal of this diffusion using score matching ideas. We follow here a similar strategy to sample from unnormalized probability densities and compute their normalizing constants. However, the time-reversed diffusion is here simulated by using an original iterative particle scheme relying on a novel score matching loss. Contrary to standard denoising diffusion models, the resulting Particle Denoising Diffusion Sampler (PDDS) provides asymptotically consistent estimates under mild assumptions. We demonstrate PDDS on multimodal and high dimensional sampling tasks. △ Less

Submitted 15 June, 2024; v1 submitted 9 February, 2024; originally announced February 2024.

Comments: To be published in ICML 2024. 37 pages, 20 figures, 3 tables, 5 algorithms

Challenges for Predictive Modeling with Neural Network Techniques using Error-Prone Dietary Intake Data

Authors: Dylan Spicker, Amir Nazemi, Joy Hutchinson, Paul Fieguth, Sharon I. Kirkpatrick, Michael Wallace, Kevin W. Dodd

Abstract: Dietary intake data are routinely drawn upon to explore diet-health relationships. However, these data are often subject to measurement error, distorting the true relationships. Beyond measurement error, there are likely complex synergistic and sometimes antagonistic interactions between different dietary components, complicating the relationships between diet and health outcomes. Flexible models… ▽ More Dietary intake data are routinely drawn upon to explore diet-health relationships. However, these data are often subject to measurement error, distorting the true relationships. Beyond measurement error, there are likely complex synergistic and sometimes antagonistic interactions between different dietary components, complicating the relationships between diet and health outcomes. Flexible models are required to capture the nuance that these complex interactions introduce. This complexity makes research on diet-health relationships an appealing candidate for the application of machine learning techniques, and in particular, neural networks. Neural networks are computational models that are able to capture highly complex, nonlinear relationships so long as sufficient data are available. While these models have been applied in many domains, the impacts of measurement error on the performance of predictive modeling has not been systematically investigated. However, dietary intake data are typically collected using self-report methods and are prone to large amounts of measurement error. In this work, we demonstrate the ways in which measurement error erodes the performance of neural networks, and illustrate the care that is required for leveraging these models in the presence of error. We demonstrate the role that sample size and replicate measurements play on model performance, indicate a motivation for the investigation of transformations to additivity, and illustrate the caution required to prevent model overfitting. While the past performance of neural networks across various domains make them an attractive candidate for examining diet-health relationships, our work demonstrates that substantial care and further methodological development are both required to observe increased predictive performance when applying these techniques, compared to more traditional statistical procedures. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Journal ref: Statistics in Medicine. 44.5 (2025)

Spin susceptibility in interacting two-dimensional semiconductors and bilayer systems at first order: Kohn anomalies and spin density wave ordering

Authors: Joel Hutchinson, Dmitry Miserev, Jelena Klinovaja, Daniel Loss

Abstract: This work is an analytic theoretical study of a 2D semiconductor with a Fermi surface that is split by the Zeeman coupling of electron spins to an external magnetic field in the presence of electron-electron interactions. For the first time, we calculate the spin susceptibility for long-range and finite-range interactions diagrammatically, and find a resonant peak structure at the Kohn anomaly alr… ▽ More This work is an analytic theoretical study of a 2D semiconductor with a Fermi surface that is split by the Zeeman coupling of electron spins to an external magnetic field in the presence of electron-electron interactions. For the first time, we calculate the spin susceptibility for long-range and finite-range interactions diagrammatically, and find a resonant peak structure at the Kohn anomaly already in first-order perturbation theory. In contrast to the density-density correlator that is suppressed due to the large electrostatic energy required to stabilize charge density order, the spin susceptibility does not suffer from electrostatic screening effects, thus favouring spin-density-wave order in 2D semiconductors. Our results impose significant consequences for determining magnetic phases in 2D semiconductors. For example, a strongly enhanced Kohn anomaly may result in helical ordering of magnetic impurities due to the RKKY interaction. Furthermore, the spin degree of freedom can equally represent a layer pseudospin in the case of bilayer materials. In this case, the external "magnetic field" is a combination of layer bias and interlayer hopping. The sharp peak of the 2D static spin susceptibility may then be responsible for dipole-density-wave order in bilayer materials at large enough electron-phonon coupling. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: 17 pages, 5 figures

Multiple equilibrium states of a curved-sided hexagram: Part II-Transitions between states

Authors: Lu Lu, Jize Dai, Sophie Leanza, John W. Hutchinson, Ruike Renee Zhao

Abstract: Curved-sided hexagrams with multiple equilibrium states have great potential in engineering applications such as foldable architectures, deployable aerospace structures, and shape-morphing soft robots. In Part I, the classical stability criterion based on energy variation was used to study the elastic stability of the curved-sided hexagram and identify the natural curvature range for stability of… ▽ More Curved-sided hexagrams with multiple equilibrium states have great potential in engineering applications such as foldable architectures, deployable aerospace structures, and shape-morphing soft robots. In Part I, the classical stability criterion based on energy variation was used to study the elastic stability of the curved-sided hexagram and identify the natural curvature range for stability of each state for circular and rectangular rod cross-sections. Here, we combine a multi-segment Kirchhoff rod model, finite element simulations, and experiments to investigate the transitions between four basic equilibrium states of the curved-sided hexagram. The four equilibrium states, namely the star hexagram, the daisy hexagram, the 3-loop line, and the 3-loop "8", carry uniform bending moments in their initial states, and the magnitudes of these moments depend on the natural curvatures and their initial curvatures. Transitions between these equilibrium states are triggered by applying bending loads at their corners or edges. It is found that transitions between the stable equilibrium states of the curved-sided hexagram are influenced by both the natural curvature and the loading position. Within a specific natural curvature range, the star hexagram, the daisy hexagram, and the 3-loop "8" can transform among one another by bending at different positions. Based on these findings, we identify the natural curvature range and loading conditions to achieve transition among these three equilibrium states plus a folded 3-loop line state for one specific ring having a rectangular cross-section. The results obtained in this part also validate the elastic stability range of the four equilibrium states of the curved-sided hexagram in Part I. We envision that the present work could provide a new perspective for the design of multi-functional deployable and foldable structures. △ Less

Submitted 24 January, 2025; v1 submitted 12 July, 2023; originally announced July 2023.

Journal ref: Journal of the Mechanics and Physics of Solids 180 (2023) 105407

Multiple equilibrium states of a curved-sided hexagram: Part I-Stability of states

Authors: Lu Lu, Jize Dai, Sophie Leanza, Ruike Renee Zhao, John W. Hutchinson

Abstract: The stability of the multiple equilibrium states of a hexagram ring with six curved sides is investigated. Each of the six segments is a rod having the same length and uniform natural curvature. These rods are bent uniformly in the plane of the hexagram into equal arcs of 120deg or 240deg and joined at a cusp where their ends meet to form a 1-loop planar ring. The 1-loop rings formed from 120deg o… ▽ More The stability of the multiple equilibrium states of a hexagram ring with six curved sides is investigated. Each of the six segments is a rod having the same length and uniform natural curvature. These rods are bent uniformly in the plane of the hexagram into equal arcs of 120deg or 240deg and joined at a cusp where their ends meet to form a 1-loop planar ring. The 1-loop rings formed from 120deg or 240deg arcs are inversions of one another and they, in turn, can be folded into a 3-loop straight line configuration or a 3-loop ring with each loop in an "8" shape. Each of these four equilibrium states has a uniform bending moment. Two additional intriguing planar shapes, 6-circle hexagrams, with equilibrium states that are also uniform bending, are identified and analyzed for stability. Stability is lost when the natural curvature falls outside the upper and lower limits in the form of a bifurcation mode involving coupled out-of-plane deflection and torsion of the rod segments. Conditions for stability, or lack thereof, depend on the geometry of the rod cross-section as well as its natural curvature. Rods with circular and rectangular cross-sections will be analyzed using a specialized form of Kirchhoff rod theory, and properties will be detailed such that all four of the states of interest are mutually stable. Experimental demonstrations of the various states and their stability are presented. Part II presents numerical simulations of transitions between states using both rod theory and a three-dimensional finite element formulation, includes confirmation of the stability limits established in Part I, and presents additional experimental demonstrations and verifications. △ Less

Submitted 24 January, 2025; v1 submitted 12 July, 2023; originally announced July 2023.

Journal ref: Journal of the Mechanics and Physics of Solids 180 (2023) 105406

Geometric Neural Diffusion Processes

Authors: Emile Mathieu, Vincent Dutordoir, Michael J. Hutchinson, Valentin De Bortoli, Yee Whye Teh, Richard E. Turner

Abstract: Denoising diffusion models have proven to be a flexible and effective paradigm for generative modelling. Their recent extension to infinite dimensional Euclidean spaces has allowed for the modelling of stochastic processes. However, many problems in the natural sciences incorporate symmetries and involve data living in non-Euclidean spaces. In this work, we extend the framework of diffusion models… ▽ More Denoising diffusion models have proven to be a flexible and effective paradigm for generative modelling. Their recent extension to infinite dimensional Euclidean spaces has allowed for the modelling of stochastic processes. However, many problems in the natural sciences incorporate symmetries and involve data living in non-Euclidean spaces. In this work, we extend the framework of diffusion models to incorporate a series of geometric priors in infinite-dimension modelling. We do so by a) constructing a noising process which admits, as limiting distribution, a geometric Gaussian process that transforms under the symmetry group of interest, and b) approximating the score with a neural network that is equivariant w.r.t. this group. We show that with these conditions, the generative functional model admits the same symmetry. We demonstrate scalability and capacity of the model, using a novel Langevin-based conditional sampler, to fit complex scalar and vector fields, with Euclidean and spherical codomain, on synthetic and real-world weather data. △ Less

Submitted 11 July, 2023; originally announced July 2023.

On the Elastic Stability of Folded Rings in Circular and Straight States

Authors: Sophie Leanza, Ruike Renee Zhao, John W. Hutchinson

Abstract: Single-loop elastic rings can be folded into multi-loop equilibrium configurations. In this paper, the stability of several such multi-loop states which are either circular or straight are investigated analytically and illustrated by experimental demonstrations. The analysis ascertains stability by exploring variations of the elastic energy of the rings for admissible deformations in the vicinity… ▽ More Single-loop elastic rings can be folded into multi-loop equilibrium configurations. In this paper, the stability of several such multi-loop states which are either circular or straight are investigated analytically and illustrated by experimental demonstrations. The analysis ascertains stability by exploring variations of the elastic energy of the rings for admissible deformations in the vicinity of the equilibrium state. The approach employed is the conventional stability analysis for elastic conservative systems which differs from most of the analyses that have been published on this class of problems, as will be illustrated by reproducing and elaborating on several problems in the literature. In addition to providing solutions to two basic problems, the paper analyses and demonstrates the stability of six-sided rings that fold into straight configurations. △ Less

Submitted 5 April, 2023; originally announced April 2023.

OstrichRL: A Musculoskeletal Ostrich Simulation to Study Bio-mechanical Locomotion

Authors: Vittorio La Barbera, Fabio Pardo, Yuval Tassa, Monica Daley, Christopher Richards, Petar Kormushev, John Hutchinson

Abstract: Muscle-actuated control is a research topic that spans multiple domains, including biomechanics, neuroscience, reinforcement learning, robotics, and graphics. This type of control is particularly challenging as bodies are often overactuated and dynamics are delayed and non-linear. It is however a very well tested and tuned actuation mechanism that has undergone millions of years of evolution with… ▽ More Muscle-actuated control is a research topic that spans multiple domains, including biomechanics, neuroscience, reinforcement learning, robotics, and graphics. This type of control is particularly challenging as bodies are often overactuated and dynamics are delayed and non-linear. It is however a very well tested and tuned actuation mechanism that has undergone millions of years of evolution with interesting properties exploiting passive forces and efficient energy storage of muscle-tendon units. To facilitate research on muscle-actuated simulation, we release a 3D musculoskeletal simulation of an ostrich based on the MuJoCo physics engine. The ostrich is one of the fastest bipeds on earth and therefore makes an excellent model for studying muscle-actuated bipedal locomotion. The model is based on CT scans and dissections used to collect actual muscle data, such as insertion sites, lengths, and pennation angles. Along with this model, we also provide a set of reinforcement learning tasks, including reference motion tracking, running, and neck control, used to infer muscle actuation patterns. The reference motion data is based on motion capture clips of various behaviors that we preprocessed and adapted to our model. This paper describes how the model was built and iteratively improved using the tasks. We also evaluate the accuracy of the muscle actuation patterns by comparing them to experimentally collected electromyographic data from locomoting birds. The results demonstrate the need for rich reward signals or regularization techniques to constrain muscle excitations and produce realistic movements. Overall, we believe that this work can provide a useful bridge between fields of research interested in muscle actuation. △ Less

Submitted 24 May, 2022; v1 submitted 11 December, 2021; originally announced December 2021.

Comments: https://github.com/vittorione94/ostrichrl

A general locomotion control framework for multi-legged locomotors

Authors: Baxi Chong, Yasemin O. Aydin, Jennifer M. Rieser, Guillaume Sartoretti, Tianyu Wang, Julian Whitman, Abdul Kaba, Enes Aydin, Ciera McFarland, Kelimar Diaz Cruz, Jeffery W. Rankin, Krijn B Michel, Alfredo Nicieza, John R Hutchinson, Howie Choset, Daniel I. Goldman

Abstract: Serially connected robots are promising candidates for performing tasks in confined spaces such as search-and-rescue in large-scale disasters. Such robots are typically limbless, and we hypothesize that the addition of limbs could improve mobility. However, a challenge in designing and controlling such devices lies in the coordination of high-dimensional redundant modules in a way that improves mo… ▽ More Serially connected robots are promising candidates for performing tasks in confined spaces such as search-and-rescue in large-scale disasters. Such robots are typically limbless, and we hypothesize that the addition of limbs could improve mobility. However, a challenge in designing and controlling such devices lies in the coordination of high-dimensional redundant modules in a way that improves mobility. Here we develop a general framework to control serially connected multi-legged robots. Specifically, we combine two approaches to build a general shape control scheme which can provide baseline patterns of self-deformation ("gaits") for effective locomotion in diverse robot morphologies. First, we take inspiration from a dimensionality reduction and a biological gait classification scheme to generate cyclic patterns of body deformation and foot lifting/lowering, which facilitate generation of arbitrary substrate contact patterns. Second, we use geometric mechanics methods to facilitates identification of optimal phasing of these undulations to maximize speed and/or stability. Our scheme allows the development of effective gaits in multi-legged robots locomoting on flat frictional terrain with diverse number of limbs (4, 6, 16, and even 0 limbs) and body actuation capabilities (including sidewinding gaits on limbless devices). By properly coordinating the body undulation and the leg placement, our framework combines the advantages of both limbless robots (modularity) and legged robots (mobility). We expect that our framework can provide general control schemes for the rapid deployment of general multi-legged robots, paving the ways toward machines that can traverse complex environments under real-life conditions. △ Less

Submitted 3 February, 2022; v1 submitted 1 December, 2021; originally announced December 2021.

Bending Instability of Rod-shaped Bacteria

Authors: Luyi Qiu, John W. Hutchinson, Ariel Amir

Abstract: A thin-walled tube, e.g., a drinking straw, manifests an instability when bent by localizing the curvature change in a small region. This instability has been extensively studied since the seminal work of Brazier nearly a century ago. However, the scenario of pressurized tubes has received much less attention. Motivated by rod-shaped bacteria such as E. coli, whose cell walls are much thinner than… ▽ More A thin-walled tube, e.g., a drinking straw, manifests an instability when bent by localizing the curvature change in a small region. This instability has been extensively studied since the seminal work of Brazier nearly a century ago. However, the scenario of pressurized tubes has received much less attention. Motivated by rod-shaped bacteria such as E. coli, whose cell walls are much thinner than their radius and are subject to a substantial internal pressure, we study, theoretically, how this instability is affected by this internal pressure. In the parameter range relevant to the bacteria, we find that the internal pressure significantly postpones the onset of the instability, while the bending stiffness of the cell wall has almost no influence. This study suggests a new method to infer turgor pressure in rod-shaped bacteria from bending experiments. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Comments: 5 pages, 2 figures with a supplementary material

Journal ref: Phys. Rev. Lett. 128, 058101 (2022)

Analytical approach for the Mott transition in the Kane-Mele-Hubbard model

Authors: Joel Hutchinson, Philipp W. Klein, Karyn Le Hur

Abstract: The description of interactions in strongly-correlated topological phases of matter remains a challenge. Here, we develop a stochastic functional approach for interacting topological insulators including both charge and spin channels. We find that the Mott transition of the Kane-Mele-Hubbard model may be described by the variational principle with one equation. We present different views of this e… ▽ More The description of interactions in strongly-correlated topological phases of matter remains a challenge. Here, we develop a stochastic functional approach for interacting topological insulators including both charge and spin channels. We find that the Mott transition of the Kane-Mele-Hubbard model may be described by the variational principle with one equation. We present different views of this equation from the electron Green's function, the free-energy and the Hellmann-Feynman theorem. The band gap remains finite at the transition and the Mott phase is characterized by antiferromagnetism in the $x-y$ plane. The interacting topological phase is described through a $\mathbb{Z}_2$ number related to helical edge modes. Our results then show that improving stochastic approaches can give further insight on the understanding of interacting phases of matter. △ Less

Submitted 15 July, 2021; v1 submitted 19 May, 2021; originally announced May 2021.

Comments: 12 pages, 5 figures

Journal ref: Phys. Rev. B 104, 075120 (2021)

Criticality Experiments with Fast 25 and 49 Metal and Hydride Systems During the Manhattan Project

Authors: J. Hutchinson, J. Alwin, A. McSpaden, W. Myers, M. Rising, R. Sanchez

Abstract: Criticality experiments with $^{235}$U (metal and hydride) and $^{239}$Pu (metal) were performed during the Manhattan Project. Results from these experiments provided necessary information for the success of the Manhattan Project. These experiments have been previously described in compilations made after the Manhattan Project, but those works are either lacking in technical details or are not pub… ▽ More Criticality experiments with $^{235}$U (metal and hydride) and $^{239}$Pu (metal) were performed during the Manhattan Project. Results from these experiments provided necessary information for the success of the Manhattan Project. These experiments have been previously described in compilations made after the Manhattan Project, but those works are either lacking in technical details or are not publicly available. This work aims to provide detailed information while showcasing the enduring impact of these experiments 75 years after they were performed. Furthermore, we use modern computational methods embodied in the MCNP6 code and ENDF data to analyze and interpret these historic measurements. The world's first four criticality accidents are also discussed, as lessons learned from these helped shape the field of criticality experiments. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Report number: LA-UR-21-20901

Fast Rossi-alpha Measurements of Plutonium using Organic Scintillators

Authors: M. Y. Hua, C. A. Bravo, A. T. MacDonald, J. D. Hutchinson, G. E. McKenzie, T. J. Grove, J. M. Goda, A. T. McSpaden, S. D. Clarke, S. A. Pozzi

Abstract: In this work, Rossi-alpha measurements were simultaneously performed with a $^3$He-based detection system and an organic scintillator-based detection system. The assembly is 15 kg of plutonium (93 wt$\%$ $^{239}$Pu) reflected by copper and moderated by lead. The goal of Rossi-alpha measurements is to estimate the prompt neutron decay constant, alpha. Simulations estimate $k_\text{eff}$ = 0.624 and… ▽ More In this work, Rossi-alpha measurements were simultaneously performed with a $^3$He-based detection system and an organic scintillator-based detection system. The assembly is 15 kg of plutonium (93 wt$\%$ $^{239}$Pu) reflected by copper and moderated by lead. The goal of Rossi-alpha measurements is to estimate the prompt neutron decay constant, alpha. Simulations estimate $k_\text{eff}$ = 0.624 and $α$ = 52.3 $\pm$ 2.5 ns for the measured assembly. The organic scintillator system estimated $α$ = 47.4 $\pm$ 2.0 ns, having a 9.37$\%$ error (though the 1.09 standard deviation confidence intervals overlapped). The $^3$He system estimated $α$ = 37 $μ$s. The known slowing down time of the $^3$He system is 35-40 $μ$s, which means the slowing down time dominates and obscures the prompt neutron decay constant. Subsequently, the organic scintillator system should be used for assemblies with alpha much less than 35 $μ$s. △ Less

Submitted 13 October, 2020; originally announced October 2020.

Comments: PHYSOR 2020: Transition to a Scalable Nuclear Future Cambridge, United Kingdom, March 29th-April 2nd, 2020

On the Feynman-alpha Method for Reflected Fissile Assemblies

Authors: Michael Y. Hua, Jesson D. Hutchinson, George E. McKenzie, Shaun D. Clarke, Sara A. Pozzi

Abstract: The Feynman-alpha method is a neutron noise technique that is used to estimate the prompt neutron period of fissile assemblies. The method and quantity are of widespread interest including in applications such as nuclear criticality safety, safeguards and nonproliferation, and stockpile stewardship; the prompt neutron period may also be used to infer the $k_\text{eff}$ multiplication factor. The F… ▽ More The Feynman-alpha method is a neutron noise technique that is used to estimate the prompt neutron period of fissile assemblies. The method and quantity are of widespread interest including in applications such as nuclear criticality safety, safeguards and nonproliferation, and stockpile stewardship; the prompt neutron period may also be used to infer the $k_\text{eff}$ multiplication factor. The Feynman-alpha method is predicated on time-correlated neutron detections that deviate from a Poisson random variable due to multiplication. Traditionally, such measurements are diagnosed with one-region point kinetics, but two-region models are required when the fissile assembly is reflected. This paper presents a derivation of the two-region point kinetics Feynman-alpha equations based on a double integration of the Rossi-alpha equations, develops novel propagation of measurement uncertainty, and validates the theory. Validation is achieved with organic scintillator measurements of weapons-grade plutonium reflected by various amounts of copper to achieve $k_\text{eff}$ values of 0.83-0.94 and prompt periods of 5-75 ns. The results demonstrate that Feynman-alpha measurements should use the two-region model instead of the one-region model. The simplified one-region model deviates from the validated two-region models by as much as 10\% in the estimate of the prompt neutron period, and the two-region model reduces to the one-region model for small amounts of reflector. The Feynman-alpha estimates of the prompt neutron period are compared to those of the Rossi-alpha approach. The comparative results demonstrate that the Feynman-alpha method is more precise than the Rossi-alpha method and more accurate for $k_\text{eff}<0.92$, whereas the Rossi-alpha method is generally more accurate for higher multiplications. △ Less

Submitted 2 November, 2020; v1 submitted 22 October, 2020; originally announced October 2020.

Comments: Draft preprint for Annals of Nuclear Energy

Rossi-alpha Uncertainty Quantification by Analytic, Bootstrap, and Sample Methods to Inform Fitting Best Practices

Authors: M. Y. Hua, C. A. Bravo, R. M. Marchie, J. D. Hutchinson, G. E. McKenzie, S. A. Pozzi

Abstract: The prompt neutron period (the negative reciprocal of the prompt neutron decay constant) can be estimated using the Rossi-alpha technique that is predicated on fitting Rossi-alpha histograms and of interest in nuclear criticality safety and nonproliferation [1, 2, 3]. The histograms are traditionally fit with a one-exponential model; however, recent work has proposed a two-exponential model to acc… ▽ More The prompt neutron period (the negative reciprocal of the prompt neutron decay constant) can be estimated using the Rossi-alpha technique that is predicated on fitting Rossi-alpha histograms and of interest in nuclear criticality safety and nonproliferation [1, 2, 3]. The histograms are traditionally fit with a one-exponential model; however, recent work has proposed a two-exponential model to account for reflector-induced phenomenon [4, 5, 6]. Until recently, the uncertainty quantification for either model was inadequate (inaccurate and demanded large measurement times). Measurement uncertainty quantification by sample and analytic methods was developed and validated in Ref. [7]. The purpose of this transaction is to (i) validate a new bootstrap method by comparing bin-by-bin error bar estimates and (ii) demonstrate how to choose bin widths and reset times to optimize precision and accuracy. △ Less

Submitted 13 October, 2020; originally announced October 2020.

Comments: ANS Winter Meeting 2020

Measured Nondestructive Assay of $^{237}$Np Using Organic Scintillators and Active Neutron Multiplicity Counting

Authors: Michael Y. Hua, Thomas A. Plummer, Jesson D. Hutchinson, George E. McKenzie, Shaun D. Clarke, Sara A. Pozzi

Abstract: The purpose of nondestructive assay in the context of nuclear safeguards is to precisely verify the declared mass of a sample of nuclear material in a noninhibitive amount of time. 237Np is a proliferation concern, and the capacity to efficiently assay samples of it is a missing piece in the verification and safeguards toolbox. The material is subject to the same safeguards as 235U, is reportable… ▽ More The purpose of nondestructive assay in the context of nuclear safeguards is to precisely verify the declared mass of a sample of nuclear material in a noninhibitive amount of time. 237Np is a proliferation concern, and the capacity to efficiently assay samples of it is a missing piece in the verification and safeguards toolbox. The material is subject to the same safeguards as 235U, is reportable in gram quantities, and is classified as "other nuclear material" according to the United States Department of Energy. Given that 3000 kg of 237Np is annually produced in the US and the bare sphere critical mass is 40-60 kg, it is desirable to augment the safeguards toolbox with a system capable of distinguishing 10 g of 237Np in a 20-minute measurement. One measurement modality is neutron multiplicity counting, which relates the detected multiplicity count rates to the amount of fissionable material. Prior simulation work shows that an organic scintillator-based multiplicity counter can achieve the design criteria, whereas the flagship 3He-based system, the Epithermal Neutron Multiplicity Counter, requires much longer measurement times to achieve the same precision. In this work, simultaneous measurements of a 6-kg sphere of 237Np by organic scintillator- and 3He-based systems are used to confirm the trends in the simulation study; the organic scintillator-based system achieves 1% uncertainty in the neutron double multiplicity rate on the order of minutes, while the 3He-based system requires days to reach the same precision. In conclusion, the International Atomic Energy Agency should consider the development and deployment of an organic scintillator-based multiplicity counter △ Less

Submitted 13 October, 2020; originally announced October 2020.

Comments: Institute of Nuclear Material Management Annual Conference

Patchy nuclear chain reactions

Authors: Eric Dumonteil, Rian Bahran, Theresa Cutler, Benjamin Dechenaux, Travis Grove, Jesson Hutchinson, George McKenzie, Alexander McSpaden, Wilfried Monange, Mark Nelson, Nicholas Thompson, Andrea Zoia

Abstract: Stochastic fluctuations of the neutron population within a nuclear reactor are typically prevented by operating the core at a sufficient power, since a deterministic behavior of the neutron population is required by automatic safety systems to detect unwanted power excursions. Recent works however pointed out that, under specific circumstances, non-Poissonian patterns could affect neutron spatial… ▽ More Stochastic fluctuations of the neutron population within a nuclear reactor are typically prevented by operating the core at a sufficient power, since a deterministic behavior of the neutron population is required by automatic safety systems to detect unwanted power excursions. Recent works however pointed out that, under specific circumstances, non-Poissonian patterns could affect neutron spatial distributions. This motivated an international program to experimentally detect and characterize such fluctuations and correlations, which took place in 2017 at the Rensselaer Polytechnic Institute Reactor Critical Facility. The main findings of this program will indeed unveil patchiness in snapshots of neutron spatial distributions -- obtained with a dedicated numerical twin of the reactor -- that support this first experimental characterization of the 'neutron clustering' phenomenon, while a stochastic model based on reaction-diffusion processes and branching random walks will reveal the key role played by the reactor intrinsic sources in understanding neutron spatial correlations. △ Less

Submitted 2 October, 2020; originally announced October 2020.

Comments: 43 pages, 6 figures

Deep Markov Spatio-Temporal Factorization

Authors: Amirreza Farnoosh, Behnaz Rezaei, Eli Zachary Sennesh, Zulqarnain Khan, Jennifer Dy, Ajay Satpute, J Benjamin Hutchinson, Jan-Willem van de Meent, Sarah Ostadabbas

Abstract: We introduce deep Markov spatio-temporal factorization (DMSTF), a generative model for dynamical analysis of spatio-temporal data. Like other factor analysis methods, DMSTF approximates high dimensional data by a product between time dependent weights and spatially dependent factors. These weights and factors are in turn represented in terms of lower dimensional latents inferred using stochastic v… ▽ More We introduce deep Markov spatio-temporal factorization (DMSTF), a generative model for dynamical analysis of spatio-temporal data. Like other factor analysis methods, DMSTF approximates high dimensional data by a product between time dependent weights and spatially dependent factors. These weights and factors are in turn represented in terms of lower dimensional latents inferred using stochastic variational inference. The innovation in DMSTF is that we parameterize weights in terms of a deep Markovian prior extendable with a discrete latent, which is able to characterize nonlinear multimodal temporal dynamics, and perform multidimensional time series forecasting. DMSTF learns a low dimensional spatial latent to generatively parameterize spatial factors or their functional forms in order to accommodate high spatial dimensionality. We parameterize the corresponding variational distribution using a bidirectional recurrent network in the low-level latent representations. This results in a flexible family of hierarchical deep generative factor analysis models that can be extended to perform time series clustering or perform factor analysis in the presence of a control signal. Our experiments, which include simulated and real-world data, demonstrate that DMSTF outperforms related methodologies in terms of predictive performance for unseen data, reveals meaningful clusters in the data, and performs forecasting in a variety of domains with potentially nonlinear temporal transitions. △ Less

Submitted 18 August, 2020; v1 submitted 21 March, 2020; originally announced March 2020.

Quantum Entangled Fractional Topology and Curvatures

Authors: Joel Hutchinson, Karyn Le Hur

Abstract: We propose a two-spin quantum-mechanical model with applied magnetic fields acting on the Poincaré-Bloch sphere, to reveal a new class of topological energy bands with Chern number one half for each spin-1/2. The mechanism behind this fractional topology is a two-spin product state at the north pole and a maximally entangled state close to the south pole. The fractional Chern number of each spin c… ▽ More We propose a two-spin quantum-mechanical model with applied magnetic fields acting on the Poincaré-Bloch sphere, to reveal a new class of topological energy bands with Chern number one half for each spin-1/2. The mechanism behind this fractional topology is a two-spin product state at the north pole and a maximally entangled state close to the south pole. The fractional Chern number of each spin can be measured through the magnetizations at the poles. We study a precise protocol where the spin dynamics in time reflects the Landau-Zener physics associated with energy band crossing effects. We show a correspondence between the two-spin system and topological bilayer models on a honeycomb lattice. These models describe semimetals with a nodal ring surrounding the region of entanglement. △ Less

Submitted 2 April, 2021; v1 submitted 26 February, 2020; originally announced February 2020.

Comments: Main text is 29 pages, 3 figures. Supplementary Information attached is 28 pages, 12 figures

Journal ref: Commun Phys 4, 144 (2021)

Neural Topographic Factor Analysis for fMRI Data

Authors: Eli Sennesh, Zulqarnain Khan, Yiyu Wang, Jennifer Dy, Ajay B. Satpute, J. Benjamin Hutchinson, Jan-Willem van de Meent

Abstract: Neuroimaging studies produce gigabytes of spatio-temporal data for a small number of participants and stimuli. Rarely do researchers attempt to model and examine how individual participants vary from each other -- a question that should be addressable even in small samples given the right statistical tools. We propose Neural Topographic Factor Analysis (NTFA), a probabilistic factor analysis model… ▽ More Neuroimaging studies produce gigabytes of spatio-temporal data for a small number of participants and stimuli. Rarely do researchers attempt to model and examine how individual participants vary from each other -- a question that should be addressable even in small samples given the right statistical tools. We propose Neural Topographic Factor Analysis (NTFA), a probabilistic factor analysis model that infers embeddings for participants and stimuli. These embeddings allow us to reason about differences between participants and stimuli as signal rather than noise. We evaluate NTFA on data from an in-house pilot experiment, as well as two publicly available datasets. We demonstrate that inferring representations for participants and stimuli improves predictive generalization to unseen data when compared to previous topographic methods. We also demonstrate that the inferred latent factor representations are useful for downstream tasks such as multivoxel pattern analysis and functional connectivity. △ Less

Submitted 20 November, 2020; v1 submitted 20 June, 2019; originally announced June 2019.

Comments: 15 pages, 9 figures, associated source code available at https://github.com/neu-spiral/HTFATorch

Journal ref: Advances in Neural Information Processing Systems 34 (2020)

Mixed temperature-dependent order parameters in the extended Hubbard model

Authors: Joel Hutchinson, Frank Marsiglio

Abstract: The extended Hubbard model can host s-wave, d-wave and p-wave superconducting phases depending on the values of the on-site and nearest-neighbour interactions. Upon detailed examination of the free energy functional of the gap in this model, we show that these symmetries are often dependent on temperature. The critical points of this functional are constrained by symmetry and allow us to formulate… ▽ More The extended Hubbard model can host s-wave, d-wave and p-wave superconducting phases depending on the values of the on-site and nearest-neighbour interactions. Upon detailed examination of the free energy functional of the gap in this model, we show that these symmetries are often dependent on temperature. The critical points of this functional are constrained by symmetry and allow us to formulate stringent conditions on the temperature profile of the gap function, applicable to other models as well. We discuss the finite temperature phase diagram of the extended Hubbard model, and point out the existence of symmetry transitions below $T_c$. Understanding the nature of these transitions is crucial to assessing the symmetry of unconventional superconductors. △ Less

Submitted 30 October, 2020; v1 submitted 21 February, 2019; originally announced February 2019.

Comments: 11 pages, 7 figures

Nonlinear Dynamics of Spherical Shells Buckling under Step Pressure

Authors: Jan Sieber John W. Hutchinson, J. Michael T. Thompson

Abstract: Dynamic buckling is addressed for complete elastic spherical shells subject to a rapidly applied step in external pressure. Insights from the perspective of nonlinear dynamics reveal essential mathematical features of the buckling phenomena. To capture the strong buckling imperfection-sensitivity, initial geometric imperfections in the form of an axisymmetric dimple at each pole are introduced. Dy… ▽ More Dynamic buckling is addressed for complete elastic spherical shells subject to a rapidly applied step in external pressure. Insights from the perspective of nonlinear dynamics reveal essential mathematical features of the buckling phenomena. To capture the strong buckling imperfection-sensitivity, initial geometric imperfections in the form of an axisymmetric dimple at each pole are introduced. Dynamic buckling under the step pressure is related to the quasi-static buckling pressure. Both loadings produce catastrophic collapse of the shell for conditions in which the pressure is prescribed. Damping plays an important role in dynamic buckling because of the time-dependent nonlinear interaction among modes, particularly the interaction between the spherically symmetric 'breathing' mode and the buckling mode. In this paper we argue that the precise frequency dependence of the damping does not matter as most of the damping happens at a single frequency (the breathing frequency). In general, there is not a unique step pressure threshold separating responses associated with buckling from those that do not buckle. Instead there exists a cascade of buckling thresholds, dependent on the damping and level of imperfection, separating pressures for which buckling occurs from those for which it does not occur. For shells with small and moderately small imperfections the dynamic step buckling pressure can be substantially below the quasi-static buckling pressure. △ Less

Submitted 6 February, 2019; v1 submitted 16 December, 2018; originally announced December 2018.

Comments: 11 figures,author formatted version of manuscript as accepted in Proceeding of the Royal Society A

Unconventional transport in low-density two-dimensional Rashba systems

Authors: Joel Hutchinson, Joseph Maciejko

Abstract: Rashba spin-orbit coupling appears in 2D systems lacking inversion symmetry, and causes the spin-splitting of otherwise degenerate energy bands into an upper and lower helicity band. In this paper, we explore how impurity scattering affects transport in the ultra-low-density regime where electrons are confined to the lower helicity band. A previous study has investigated the conductivity in this r… ▽ More Rashba spin-orbit coupling appears in 2D systems lacking inversion symmetry, and causes the spin-splitting of otherwise degenerate energy bands into an upper and lower helicity band. In this paper, we explore how impurity scattering affects transport in the ultra-low-density regime where electrons are confined to the lower helicity band. A previous study has investigated the conductivity in this regime using a treatment in the first Born approximation. In this work, we use the full T-matrix to uncover new features of the conductivity. We first compute the conductivity within a semiclassical Boltzmann framework and show that it exhibits an unconventional density dependence due to the unusual features of the group velocity in the single particle dispersion, as well as quantized plateaus as a function of the logarithm of the electron density. We support this with a calculation using the Kubo formula and find that these plateaus persist in the full quantum theory. We suggest that this quantization may be seen in a pump-probe experiment. △ Less

Submitted 21 November, 2018; v1 submitted 31 July, 2018; originally announced August 2018.

Comments: 15 pages, 13 figures

Journal ref: Phys. Rev. B 98, 195305 (2018)

Enhancement of Superconducting $T_c$ due to the Spin-orbit Interaction

Authors: Joel Hutchinson, J. E. Hirsch, Frank Marsiglio

Abstract: We calculate the superconducting $T_c$ for a system which experiences Rashba spin-orbit interactions. Contrary to the usual case where the electron-electron interaction is assumed to be wave vector-independent, where superconductivity is suppressed by the spin-orbit interaction (except for a small region at low electron or hole densities), we find an enhancement of the superconducting transition t… ▽ More We calculate the superconducting $T_c$ for a system which experiences Rashba spin-orbit interactions. Contrary to the usual case where the electron-electron interaction is assumed to be wave vector-independent, where superconductivity is suppressed by the spin-orbit interaction (except for a small region at low electron or hole densities), we find an enhancement of the superconducting transition temperature when we include a correlated hopping interaction between electrons. This interaction originates in the expansion of atomic orbitals due to electron-electron repulsion and gives rise to superconductivity only at high electron (low hole) densities. When superconductivity results from this interaction it is enhanced by spin-orbit coupling, in spite of a suppression of the density of states. The degree of electron-hole asymmetry about the Fermi surface is also enhanced. △ Less

Submitted 15 May, 2018; v1 submitted 26 January, 2018; originally announced January 2018.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. B 97, 184513 (2018)

Probing shells against buckling: a non-destructive technique for laboratory testing

Authors: J. Michael T. Thompson, John W. Hutchinson, Jan Sieber

Abstract: This paper addresses testing of compressed structures, such as shells, that exhibit catastrophic buckling and notorious imperfection sensitivity. The central concept is the probing of a loaded structural specimen by a controlled lateral displacement to gain quantitative insight into its buckling behaviour and to measure the energy barrier against buckling. This can provide design information about… ▽ More This paper addresses testing of compressed structures, such as shells, that exhibit catastrophic buckling and notorious imperfection sensitivity. The central concept is the probing of a loaded structural specimen by a controlled lateral displacement to gain quantitative insight into its buckling behaviour and to measure the energy barrier against buckling. This can provide design information about a structure's stiffness and robustness against buckling in terms of energy and force landscapes. Developments in this area are relatively new but have proceeded rapidly with encouraging progress. Recent experimental tests on uniformly compressed spherical shells, and axially loaded cylinders, show excellent agreement with theoretical solutions. The probing technique could be a valuable experimental procedure for testing prototype structures, but before it can be used a range of potential problems must be examined and solved. The probing response is highly nonlinear and a variety of complications can occur. Here, we make a careful assessment of unexpected limit points and bifurcations, that could accompany probing, causing complications and possibly even collapse of a test specimen. First, a limit point in the probe displacement (associated with a cusp instability and fold) can result in dynamic buckling as probing progresses, as demonstrated in the buckling of a spherical shell under volume control. Second, various types of bifurcations which can occur on the probing path which result in the probing response becoming unstable are also discussed. To overcome these problems, we outline the extra controls over the entire structure that may be needed to stabilize the response. △ Less

Submitted 13 December, 2017; originally announced December 2017.

Comments: as accepted in International Journal of Bifurcation and Chaos (18 pages)

Closing in on the large-scale CMB power asymmetry

Authors: D. Contreras, J. Hutchinson, A. Moss, D. Scott, J. P. Zibin

Abstract: Measurements of the cosmic microwave background (CMB) temperature anisotropies have revealed a dipolar asymmetry in power at the largest scales, in apparent contradiction with the statistical isotropy of standard cosmological models. The significance of the effect is not very high, and is dependent on a posteriori choices. Nevertheless, a number of models have been proposed that produce a scale-de… ▽ More Measurements of the cosmic microwave background (CMB) temperature anisotropies have revealed a dipolar asymmetry in power at the largest scales, in apparent contradiction with the statistical isotropy of standard cosmological models. The significance of the effect is not very high, and is dependent on a posteriori choices. Nevertheless, a number of models have been proposed that produce a scale-dependent asymmetry. We confront several such models for a physical, position-space modulation with CMB temperature observations. We find that, while some models that maintain the standard isotropic power spectrum are allowed, others, such as those with modulated tensor or uncorrelated isocurvature modes, can be ruled out on the basis of the overproduction of isotropic power. This remains the case even when an extra isocurvature mode fully anti-correlated with the adiabatic perturbations is added to suppress power on large scales. △ Less

Submitted 28 September, 2017; originally announced September 2017.

Comments: 6 pages, 3 figures. Comments welcome

Journal ref: Phys. Rev. D 97, 063504 (2018)

Spin-dependent Andreev reflection in spin-orbit coupled systems by breaking time-reversal symmetry

Authors: Dibya Kanti Mukherjee, Joanna Hutchinson, Arijit Kundu

Abstract: We study theoretically the differential conductance at a junction between a time reversal symmetry broken spin orbit coupled system with a tunable band gap and a superconductor. We look for spin-dependent Andreev reflection (i.e, sub-gap transport) and show that when various mass terms compete in energy, there is substantial difference of Andreev reflection probability depending on the spin of the… ▽ More We study theoretically the differential conductance at a junction between a time reversal symmetry broken spin orbit coupled system with a tunable band gap and a superconductor. We look for spin-dependent Andreev reflection (i.e, sub-gap transport) and show that when various mass terms compete in energy, there is substantial difference of Andreev reflection probability depending on the spin of the incident electron. We further analyze the origin of such spin-dependence and show how the incident angle of the electrons controls the spin-dependence of the transport. △ Less

Submitted 23 July, 2018; v1 submitted 22 August, 2017; originally announced August 2017.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. B 98, 125424 (2018)

Universality of low-energy Rashba scattering

Authors: Joel Hutchinson, Joseph Maciejko

Abstract: We investigate the scattering of a quantum particle with a two-dimensional (2D) Rashba spin-orbit coupled dispersion off of circularly symmetric potentials. As the energy of the particle approaches the bottom of the lowest spin-split band, i.e., the van Hove singularity, earlier work has shown that scattering off of an infinite circular barrier exhibits a number of features unusual from the point… ▽ More We investigate the scattering of a quantum particle with a two-dimensional (2D) Rashba spin-orbit coupled dispersion off of circularly symmetric potentials. As the energy of the particle approaches the bottom of the lowest spin-split band, i.e., the van Hove singularity, earlier work has shown that scattering off of an infinite circular barrier exhibits a number of features unusual from the point of view of conventional 2D scattering theory: the low-energy S-matrix is independent of the range of the potential, all partial waves contribute equally, the differential cross section becomes increasingly anisotropic and 1D-like, and the total cross section exhibits quantized plateaus. Via a nonperturbative determination of the T-matrix and an optical theorem which we prove here, we show that this behavior is universal for Rashba scattering off of any circularly symmetric, spin independent, finite-range potential. This is relevant both for impurity scattering in the noninteracting limit as well as for short-range two-particle scattering in the interacting problem. △ Less

Submitted 18 September, 2017; v1 submitted 9 June, 2017; originally announced June 2017.

Comments: Editors' Suggestion. 13 pages, 6 figures

Journal ref: Phys. Rev. B 96, 125304 (2017)

On uniquely k-list colorable planar graphs, graphs on surfaces, and regular graphs

Authors: M. Abdolmaleki, J. P. Hutchinson, S. Gh. Ilchi, E. S. Mahmoodian, M. A. Shabani

Abstract: A graph $G$ is called uniquely k-list colorable (U$k$LC) if there exists a list of colors on its vertices, say $L=\lbrace S_v \mid v \in V(G) \rbrace $, each of size $k$, such that there is a unique proper list coloring of $G$ from this list of colors. A graph $G$ is said to have property $M(k)$ if it is not uniquely $k$-list colorable. Mahmoodian and Mahdian characterized all graphs with property… ▽ More A graph $G$ is called uniquely k-list colorable (U$k$LC) if there exists a list of colors on its vertices, say $L=\lbrace S_v \mid v \in V(G) \rbrace $, each of size $k$, such that there is a unique proper list coloring of $G$ from this list of colors. A graph $G$ is said to have property $M(k)$ if it is not uniquely $k$-list colorable. Mahmoodian and Mahdian characterized all graphs with property $M(2)$. For $k\geq 3$ property $M(k)$ has been studied only for multipartite graphs. Here we find bounds on $M(k)$ for graphs embedded on surfaces, and obtain new results on planar graphs. We begin a general study of bounds on $M(k)$ for regular graphs, as well as for graphs with varying list sizes. △ Less

Submitted 21 May, 2017; originally announced May 2017.

MSC Class: 05C15

Quenching in Chern insulators with satellite Dirac points: The fate of edge states

Authors: Utso Bhattacharya, Joanna Hutchinson, Amit Dutta

Abstract: We perform a sudden quench on the Haldane model with long range interactions, more specifically generalising to the next to next nearest neighbour hopping, referred to as the $N3$ model in our work. Such a model possesses both isotropic and multiple anisotropic (satellite) Dirac points which lead to a rich topological phase diagram consisting of phases with higher Chern number ($C$). Quenches betw… ▽ More We perform a sudden quench on the Haldane model with long range interactions, more specifically generalising to the next to next nearest neighbour hopping, referred to as the $N3$ model in our work. Such a model possesses both isotropic and multiple anisotropic (satellite) Dirac points which lead to a rich topological phase diagram consisting of phases with higher Chern number ($C$). Quenches between the topological and the non-topological phases of such an infinite system probe the effect of the presence of the anisotropic Dirac points on the non-equilibrium response of the topological system. Interestingly, the Chern number remains the same before and after the quench for both the quenching protocols, even when the quench of the system is carried out between two different topological phases. {However, for a finite system, we establish that the initial edge current asymptotically decays to zero when the system is quenched to the non-topological phase although the Chern number for the corresponding periodically wrapped system remains unaltered; what is remarkable is that when the Hamiltonian is quenched from $|C|=2$ phase to the non-topological phase the edge current associated with the inner channel decays at a faster rate than the outer channel resembling a situation in which the system passes through the phase with $|C|=1$ before ending up in the phase $C=0$. △ Less

Submitted 6 February, 2017; v1 submitted 16 May, 2016; originally announced May 2016.

Comments: 11 pages, 8 Figures, New results on edge states

Journal ref: Phys. Rev. B 95, 144304 (2017)

Rashba scattering in the low-energy limit

Authors: Joel Hutchinson, Joseph Maciejko

Abstract: We study potential scattering in a two-dimensional electron gas with Rashba spin-orbit coupling in the limit that the energy of the scattering electron approaches the bottom of the lower spin-split band. Focusing on two spin-independent circularly symmetric potentials, an infinite barrier and a delta-function shell, we show that scattering in this limit is qualitatively different from both scatter… ▽ More We study potential scattering in a two-dimensional electron gas with Rashba spin-orbit coupling in the limit that the energy of the scattering electron approaches the bottom of the lower spin-split band. Focusing on two spin-independent circularly symmetric potentials, an infinite barrier and a delta-function shell, we show that scattering in this limit is qualitatively different from both scattering in the higher spin-split band and scattering of electrons without spin-orbit coupling. The scattering matrix is purely off-diagonal with both off-diagonal elements equal to one, and all angular momentum channels contribute equally; the differential cross section becomes increasingly peaked in the forward and backward scattering directions; the total cross section exhibits quantized plateaus. These features are independent of the details of the scattering potentials, and we conjecture them to be universal. Our results suggest that Rashba scattering in the low-energy limit becomes effectively one-dimensional. △ Less

Submitted 19 December, 2016; v1 submitted 31 March, 2016; originally announced March 2016.

Comments: corrected typo in Eq. (27). 10 pages, 6 figures

Journal ref: Phys. Rev. B 93, 245309 (2016)

Fisher Hartwig determinants, conformal field theory and universality in generalised XX models

Authors: J. Hutchinson, N. G. Jones

Abstract: We discuss certain quadratic models of spinless fermions on a 1D lattice, and their corresponding spin chains. These were studied by Keating and Mezzadri in the context of their relation to the Haar measures of the classical compact groups. We show how these models correspond to translation invariant models on an infinite or semi-infinite chain, which in the simplest case reduce to the familiar XX… ▽ More We discuss certain quadratic models of spinless fermions on a 1D lattice, and their corresponding spin chains. These were studied by Keating and Mezzadri in the context of their relation to the Haar measures of the classical compact groups. We show how these models correspond to translation invariant models on an infinite or semi-infinite chain, which in the simplest case reduce to the familiar XX model. We give physical context to mathematical results for the entanglement entropy, and calculate the spin-spin correlation functions using the Fisher-Hartwig conjecture. These calculations rigorously demonstrate universality in classes of these models. We show that these are in agreement with field theoretic and renormalization group arguments that we provide. △ Less

Submitted 17 March, 2016; originally announced March 2016.

Journal ref: J. Stat. Mech. (2016) 073103

Revisiting a Nice Cycle Lemma and its Consequences

Authors: M. O. Albertson, J. P. Hutchinson, R. B. Richter

Abstract: We correct some errors and omissions primarily in a paper [Albertson&Hutchinson2004], discovered by R.B. Richter, and also some in a proof of [Thomassen1993] and of [Yu1997]. We give a short proof of Thomassen's theorem that every triangulation of a surface with all noncontractible cycles sufficiently long can be 5-colored; part of the shortness is due to the use of the Four Color Theorem, which i… ▽ More We correct some errors and omissions primarily in a paper [Albertson&Hutchinson2004], discovered by R.B. Richter, and also some in a proof of [Thomassen1993] and of [Yu1997]. We give a short proof of Thomassen's theorem that every triangulation of a surface with all noncontractible cycles sufficiently long can be 5-colored; part of the shortness is due to the use of the Four Color Theorem, which is not used in Thomassen's original proof. △ Less

Submitted 7 May, 2016; v1 submitted 22 February, 2016; originally announced February 2016.

Comments: 9 pages

MSC Class: 05C15; 05C10

On relations between one-dimensional quantum and two-dimensional classical spin systems

Authors: J. Hutchinson, J. P. Keating, F. Mezzadri

Abstract: We exploit mappings between quantum and classical systems in order to obtain a class of two-dimensional classical systems with critical properties equivalent to those of the class of one-dimensional quantum systems discussed in a companion paper (J. Hutchinson, J. P. Keating, and F. Mezzadri, arXiv:1503.05732). In particular, we use three approaches: the Trotter-Suzuki mapping; the method of coher… ▽ More We exploit mappings between quantum and classical systems in order to obtain a class of two-dimensional classical systems with critical properties equivalent to those of the class of one-dimensional quantum systems discussed in a companion paper (J. Hutchinson, J. P. Keating, and F. Mezzadri, arXiv:1503.05732). In particular, we use three approaches: the Trotter-Suzuki mapping; the method of coherent states; and a calculation based on commuting the quantum Hamiltonian with the transfer matrix of a classical system. This enables us to establish universality of certain critical phenomena by extension from the results in our previous article for the classical systems identified. △ Less

Submitted 26 March, 2015; originally announced March 2015.

Comments: 36 pages

Random matrix theory and critical phenomena in quantum spin chains

Authors: J. Hutchinson, J. P. Keating, F. Mezzadri

Abstract: We compute critical properties of a general class of quantum spin chains which are quadratic in the Fermi operators and can be solved exactly under certain symmetry constraints related to the classical compact groups $U(N)$, $O(N)$ and $Sp(2N)$. In particular we calculate critical exponents $s$, $ν$ and $z$, corresponding to the energy gap, correlation length and dynamic exponent respectively. We… ▽ More We compute critical properties of a general class of quantum spin chains which are quadratic in the Fermi operators and can be solved exactly under certain symmetry constraints related to the classical compact groups $U(N)$, $O(N)$ and $Sp(2N)$. In particular we calculate critical exponents $s$, $ν$ and $z$, corresponding to the energy gap, correlation length and dynamic exponent respectively. We also compute the ground state correlators $\left\langle σ^{x}_{i} σ^{x}_{i+n} \right\rangle_{g}$, $\left\langle σ^{y}_{i} σ^{y}_{i+n} \right\rangle_{g}$ and $\left\langle \prod^{n}_{i=1} σ^{z}_{i} \right\rangle_{g}$, all of which display quasi-long-range order with a critical exponent dependent upon system parameters. Our approach establishes universality of the exponents for the class of systems in question. △ Less

Submitted 19 March, 2015; originally announced March 2015.

Comments: 14 pages

Spectral Asymptotics for $V$-variable Sierpinski Gaskets

Authors: U. Freiberg, B. M. Hambly, John E. Hutchinson

Abstract: The family of $V$-variable fractals provides a means of interpolating between two families of random fractals previously considered in the literature; scale irregular fractals ($V=1$) and random recursive fractals ($V=\infty$). We consider a class of $V$-variable affine nested fractals based on the Sierpinski gasket with a general class of measures. We calculate the spectral exponent for a general… ▽ More The family of $V$-variable fractals provides a means of interpolating between two families of random fractals previously considered in the literature; scale irregular fractals ($V=1$) and random recursive fractals ($V=\infty$). We consider a class of $V$-variable affine nested fractals based on the Sierpinski gasket with a general class of measures. We calculate the spectral exponent for a general measure and find the spectral dimension for these fractals. We show that the spectral properties and on-diagonal heat kernel estimates for $V$-variable fractals are closer to those of scale irregular fractals, in that it is the fluctuations in scale that determine their behaviour but that there are also effects of the spatial variability. △ Less

Submitted 2 February, 2015; originally announced February 2015.

MSC Class: 60G18; 60G57; 28A80

Conductivity Tensor in a Holographic Quantum Hall Ferromagnet

Authors: J. Hutchinson, C. Kristjansen, G. W. Semenoff

Abstract: The Hall and longitudinal conductivities of a recently studied holographic model of a quantum Hall ferromagnet are computed using the Karch-O'Bannon technique. In addition, the low temperature entropy of the model is determined. The holographic model has a phase transition as the Landau level filling fraction is increased from zero to one. We argue that this phase transition allows the longitudina… ▽ More The Hall and longitudinal conductivities of a recently studied holographic model of a quantum Hall ferromagnet are computed using the Karch-O'Bannon technique. In addition, the low temperature entropy of the model is determined. The holographic model has a phase transition as the Landau level filling fraction is increased from zero to one. We argue that this phase transition allows the longitudinal conductivity to have features qualitatively similar to those of two dimensional electron gases in the integer quantum Hall regime. The argument also applies to the low temperature limit of the entropy. The Hall conductivity is found to have an interesting structure. Even though it does not exhibit Hall plateaux, it has a flattened dependence on the filling fraction with a jump, analogous to the interpolation between Hall plateaux, at the phase transition. △ Less

Submitted 14 August, 2014; originally announced August 2014.

Comments: 7 pages, double column format, 4 figures

Leptophilic Effective WIMPs

Authors: Spencer Chang, Ralph Edezhath, Jeffrey Hutchinson, Markus Luty

Abstract: Effective WIMP models are minimal extensions of the standard model that explain the relic density of dark matter by the ``WIMP miracle.'' In this paper we consider the phenomenology of effective WIMPs with trilinear couplings to leptons and a new ``lepton partner'' particle. The observed relic abundance fixes the strength of the cubic coupling, so the parameters of the models are defined by the ma… ▽ More Effective WIMP models are minimal extensions of the standard model that explain the relic density of dark matter by the ``WIMP miracle.'' In this paper we consider the phenomenology of effective WIMPs with trilinear couplings to leptons and a new ``lepton partner'' particle. The observed relic abundance fixes the strength of the cubic coupling, so the parameters of the models are defined by the masses of the WIMP and lepton partner particles. This gives a simple parameter space where collider and direct detection experiments can be compared under well-defined physical minimality assumptions. The most sensitive collider probe is the search for leptons + MET, while the most sensitive direct detection channel is scattering from nuclei arising from loop diagrams. Collider and direct detection searches are highly complementary: colliders give the only meaningful constraint when dark matter is its own antiparticle, while direct detection is generally more sensitive if the dark matter is not its own antiparticle. △ Less

Submitted 28 February, 2014; originally announced February 2014.

Comments: 22 pages, 10 figures

Journal ref: Phys. Rev. D 90, 015011 (2014)

Effective WIMPs

Authors: Spencer Chang, Ralph Edezhath, Jeffrey Hutchinson, Markus Luty

Abstract: The 'WIMP miracle' for the relic abundance of thermal dark matter motivates weak scale dark matter with renormalizable couplings to standard model particles. We study minimal models with such couplings that explain dark matter as a thermal relic. The models contain a singlet dark matter particle with cubic renormalizable couplings between standard model particles and 'partner' particles with the s… ▽ More The 'WIMP miracle' for the relic abundance of thermal dark matter motivates weak scale dark matter with renormalizable couplings to standard model particles. We study minimal models with such couplings that explain dark matter as a thermal relic. The models contain a singlet dark matter particle with cubic renormalizable couplings between standard model particles and 'partner' particles with the same gauge quantum numbers as the standard model particle. The dark matter has spin 0, 1/2, or 1, and may or may not be its own antiparticle. Each model has 3 parameters: the masses of the dark matter and standard model partners, and the cubic coupling. Requiring the correct relic abundance gives a 2-dimensional parameter space where collider and direct detection constraints can be directly compared. We focus on the case of dark matter interactions with colored particles. We find that collider and direct detection searches are remarkably complementary for these models. Direct detection limits for the cases where the dark matter is not its own antiparticle require dark matter masses to be in the multi-TeV range, where they are extremely difficult to probe in collider experiments. The models where dark matter is its own antiparticle are strongly constrained by collider searches for monojet and jets + MET signals. These models are constrained by direct detection mainly near the limit where the dark matter and partner masses are nearly degenerate, where collider searches become more difficult. △ Less

Submitted 30 July, 2013; originally announced July 2013.

Comments: 37 pages, 11 figures

Journal ref: Phys. Rev. D 89, 015011 (2014)

Icezones instead of firewalls: extended entanglement beyond the event horizon and unitary evaporation of a black hole

Authors: John Hutchinson, Dejan Stojkovic

Abstract: We examine the basic assumptions in the original setup of the firewall paradox. The main claim is that a single mode of the lathe radiation is maximally entangled with the mode inside the horizon and simultaneously with the modes of early Hawking radiation. We argue that this situation never happens during the evolution of a black hole. Quantum mechanics tells us that while the black hole exists,… ▽ More We examine the basic assumptions in the original setup of the firewall paradox. The main claim is that a single mode of the lathe radiation is maximally entangled with the mode inside the horizon and simultaneously with the modes of early Hawking radiation. We argue that this situation never happens during the evolution of a black hole. Quantum mechanics tells us that while the black hole exists, unitary evolution maximally entangles a late mode located just outside the horizon with a combination of early radiation and black hole states, instead of either of them separately. One of the reasons for this is that the black hole radiation is not random and strongly depends on the geometry and charge of the black hole, as detailed numerical calculations of Hawking evaporation clearly show. As a consequence, one can't factor out the state of the black hole. However, this extended entanglement between the black hole and modes of early and late radiation indicates that, as the black hole ages, the local Rindler horizon is modified out to macroscopic distances from the black hole. Fundamentally non-local physics nor firewalls are not necessary to explain this result. We propose an infrared mechanism called {\it icezone} that is mediated by low energy interacting modes and acts near any event horizon to entangle states separated by long distances. These interactions at first provide small corrections to the thermal Hawking radiation. At the end of evaporation however the effect of interactions is as large as the Hawking radiation and information is recovered for an outside observer. We verify this in an explicit construction and calculation of the density matrix of a spin model. △ Less

Submitted 30 June, 2016; v1 submitted 22 July, 2013; originally announced July 2013.

Comments: Published in Class. Quant. Grav. 33 (2016) no.13, 135006 , references updated

Journal ref: Class. Quant. Grav. 33 (2016) no.13, 135006

A variation on Heawood list-coloring for graphs on surfaces

Authors: Joan P. Hutchinson

Abstract: We prove a variation on Heawood list-coloring for graphs on surfaces, modeled on Thomassen's planar 5-list-coloring theorem. For epsilon>0 define the Heawood number to be H(epsilon)=Floor((7+Sqrt[24*epsilon+1])/2). We prove that, except for epsilon=3, every graph embedded on a surface of Euler genus epsilon>0 with a distinguished face F can be list-colored when the vertices of F have (H(epsilon)-2… ▽ More We prove a variation on Heawood list-coloring for graphs on surfaces, modeled on Thomassen's planar 5-list-coloring theorem. For epsilon>0 define the Heawood number to be H(epsilon)=Floor((7+Sqrt[24*epsilon+1])/2). We prove that, except for epsilon=3, every graph embedded on a surface of Euler genus epsilon>0 with a distinguished face F can be list-colored when the vertices of F have (H(epsilon)-2)-lists and all other vertices have H(epsilon)-lists unless the induced subgraph on the vertices of F contains the complete graph on H(epsilon)-1 vertices. △ Less

Submitted 20 May, 2013; v1 submitted 27 February, 2013; originally announced February 2013.

Comments: 14 pages

MSC Class: 05C10; 05C15

The Spectral Decomposition of the Helium atom two-electron configuration in terms of Hydrogenic orbitals

Authors: J. Hutchinson, M. Baker, F. Marsiglio

Abstract: The two electron configuration in the Helium atom is known to very high precision. Yet, we tend to refer to this configuration as a $1s\uparrow 1s\downarrow$ singlet, where the designations refer to Hydrogen orbitals. The high precision calculations utilize basis sets that are suited for high accuracy and ease of calculation, but do not really aid in our understanding of the electron configuration… ▽ More The two electron configuration in the Helium atom is known to very high precision. Yet, we tend to refer to this configuration as a $1s\uparrow 1s\downarrow$ singlet, where the designations refer to Hydrogen orbitals. The high precision calculations utilize basis sets that are suited for high accuracy and ease of calculation, but do not really aid in our understanding of the electron configuration in terms of product states of Hydrogen orbitals. Since undergraduate students are generally taught to think of Helium, and indeed, the rest of the periodic table, in terms of Hydrogenic orbitals, we present in this paper a detailed spectral decomposition of the two electron ground state for Helium in terms of these basis states. The $1s\uparrow 1s\downarrow$ singlet contributes less than 93% to the ground state configuration, with other contributions coming from both bound and continuum Hydrogenic states. △ Less

Submitted 9 November, 2012; originally announced November 2012.

Comments: 13 pages, 1 figure; suitable for and undergraduate and/or graduate course in quantum mechanics + some implications for electron-electron interactions in strongly correlated materials

Journal ref: Eur. J. Phys. 34, 111-128, 2013