-
Electronics of Time-of-flight Measurement for Back-n at CSNS
Authors:
T. Yu,
P. Cao,
X. Y. Ji,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. Jing,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXI…
▽ More
Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXIe (Peripheral Component Interconnect Express eXtensions for Instrumentation) platform, which is composed of FDM (Field Digitizer Modules), TCM (Trigger and Clock Module), and SCM (Signal Conditioning Module). T0 signal synchronous to the CSNS accelerator represents the neutron emission from the target. It is the start of time stamp. The trigger and clock module (TCM) receives, synchronizes and distributes the T0 signal to each FDM based on the PXIe backplane bus. Meantime, detector signals after being conditioned are fed into FDMs for waveform digitizing. First sample point of the signal is the stop of time stamp. According to the start, stop time stamp and the time of signal over threshold, the total TOF can be obtained. FPGA-based (Field Programmable Gate Array) TDC is implemented on TCM to accurately acquire the time interval between the asynchronous T0 signal and the global synchronous clock phase. There is also an FPGA-based TDC on FDM to accurately acquire the time interval between T0 arriving at FDM and the first sample point of the detector signal, the over threshold time of signal is obtained offline. This method for TOF measurement is efficient and not needed for additional modules. Test result shows the accuracy of TOF is sub-nanosecond and can meet the requirement for Back-n at CSNS.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
T0 Fan-out for Back-n White Neutron Facility at CSNS
Authors:
X. Y. Ji,
P. Cao,
T. Yu,
L. K. Xie,
X. R. Huang,
Q. An,
H. Y. Bai,
J. Bao,
Y. H. Chen,
P. J. Cheng,
Z. Q. Cui,
R. R. Fan,
C. Q. Feng,
M. H. Gu,
Z. J. Han,
G. Z. He,
Y. C. He,
Y. F. He,
H. X. Huang,
W. L. Huang,
X. L. Ji,
H. Y. Jiang,
W. Jiang,
H. Y. Jing,
L. Kang
, et al. (46 additional authors not shown)
Abstract:
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal,…
▽ More
the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal, generated from the CSNS accelerator, represents this start time. Besides, the T0 signal is also used as the gate control signal that triggers the readout electronics. Obviously, the timing precision of T0 directly affects the measurement precision of TOF and controls the running or readout electronics. In this paper, the T0 fan-out for Back-n white neutron facility at CSNS is proposed. The T0 signal travelling from the CSNS accelerator is fanned out to the two underground experiment stations respectively over long cables. To guarantee the timing precision, T0 signal is conditioned with good signal edge. Furthermore, techniques of signal pre-emphasizing and equalizing are used to improve signal quality after T0 being transmitted over long cables with about 100 m length. Experiments show that the T0 fan-out works well, the T0 signal transmitted over 100 m remains a good time resolution with a standard deviation of 25 ps. It absolutely meets the required accuracy of the measurement of TOF.
△ Less
Submitted 24 June, 2018;
originally announced June 2018.
-
Charge oscillation-induced light transmission through subwavelength slits and holes
Authors:
X. R. Huang,
R. W. Peng,
Z. Wang,
F. Gao,
S. S. Jiang
Abstract:
We present a concrete picture of spoof surface plasmons (SSPs) combined with cavity resonance to clarify the basic mechanism underlying extraordinary light transmission through metal films with subwavelength slits or holes. This picture may indicate a general mechanism of metallic nanostructure optics: When light is incident on a non-planar conducting surface, the free electrons cannot move homo…
▽ More
We present a concrete picture of spoof surface plasmons (SSPs) combined with cavity resonance to clarify the basic mechanism underlying extraordinary light transmission through metal films with subwavelength slits or holes. This picture may indicate a general mechanism of metallic nanostructure optics: When light is incident on a non-planar conducting surface, the free electrons cannot move homogeneously in response to the incident electric field, i.e., their movement can be impeded at the rough parts, forming inhomogeneous charge distributions. The oscillating charges/dipoles then emit photons (similar to Thomson scattering of x rays by oscillating electrons), and the interference between the photons may give rise to anomalous transmission, reflection or scattering.
△ Less
Submitted 20 March, 2009;
originally announced March 2009.
-
Fundamental mechanism underlying subwavelength optics of metamaterials: Charge oscillation-induced light emission and interference
Authors:
X. R. Huang,
R. W. Peng,
Mu Wang
Abstract:
Interactions between light and conducting nanostructures can result in a variety of novel and fascinating phenomena. These properties may have wide applications, but their underlying mechanisms have not been completely understood. From calculations of surface charge density waves on conducting gratings and by comparing them with classical surface plasmons, we revealed a general yet concrete pict…
▽ More
Interactions between light and conducting nanostructures can result in a variety of novel and fascinating phenomena. These properties may have wide applications, but their underlying mechanisms have not been completely understood. From calculations of surface charge density waves on conducting gratings and by comparing them with classical surface plasmons, we revealed a general yet concrete picture about coupling of light to free electron oscillation on structured conducting surfaces that can lead to oscillating subwavelength charge patterns (i.e., spoof surface plasmons but without the dispersion property of classical surface plasmons). New wavelets emitted from these light sources then destructively interfere to form evanescent waves. This principle, usually combined with other mechanisms (e.g. resonance), is mainly a geometrical effect that can be universally involved in light scattering from all periodic and nonperiodic structures containing free electrons, including perfect conductors. The spoof surface plasmon picture may provide clear guidelines for developing metamaterial-based nano-optical devices.
△ Less
Submitted 20 March, 2009;
originally announced March 2009.
-
Implementation of many-qubit Grover search by cavity QED
Authors:
H. Q. Fan,
W. L. Yang,
X. R. Huang,
M. Feng
Abstract:
We study the possibility of an implementation of N-qubit (N>3) Grover search in cavity QED, based on a fast operation of N-qubit controlled phase-flip with atoms in resonance with the cavity mode. We demonstrate both analytically and numerically that, our scheme could be achieved efficiently to find a marked state with high fidelity and high success probability. As cavity decay is involved in ou…
▽ More
We study the possibility of an implementation of N-qubit (N>3) Grover search in cavity QED, based on a fast operation of N-qubit controlled phase-flip with atoms in resonance with the cavity mode. We demonstrate both analytically and numerically that, our scheme could be achieved efficiently to find a marked state with high fidelity and high success probability. As cavity decay is involved in our quantum trajectory treatment, we could analytically understand the implementation of a Grover search subject to dissipation, which would be very helpful for relevant experiments.
△ Less
Submitted 7 October, 2008; v1 submitted 21 August, 2008;
originally announced August 2008.
