-
Euclid. II. The VIS Instrument
Authors:
Euclid Collaboration,
M. S. Cropper,
A. Al-Bahlawan,
J. Amiaux,
S. Awan,
R. Azzollini,
K. Benson,
M. Berthe,
J. Boucher,
E. Bozzo,
C. Brockley-Blatt,
G. P. Candini,
C. Cara,
R. A. Chaudery,
R. E. Cole,
P. Danto,
J. Denniston,
A. M. Di Giorgio,
B. Dryer,
J. -P. Dubois,
J. Endicott,
M. Farina,
E. Galli,
L. Genolet,
J. P. D. Gow
, et al. (410 additional authors not shown)
Abstract:
This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift ran…
▽ More
This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information.
△ Less
Submitted 2 January, 2025; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Euclid. I. Overview of the Euclid mission
Authors:
Euclid Collaboration,
Y. Mellier,
Abdurro'uf,
J. A. Acevedo Barroso,
A. Achúcarro,
J. Adamek,
R. Adam,
G. E. Addison,
N. Aghanim,
M. Aguena,
V. Ajani,
Y. Akrami,
A. Al-Bahlawan,
A. Alavi,
I. S. Albuquerque,
G. Alestas,
G. Alguero,
A. Allaoui,
S. W. Allen,
V. Allevato,
A. V. Alonso-Tetilla,
B. Altieri,
A. Alvarez-Candal,
S. Alvi,
A. Amara
, et al. (1115 additional authors not shown)
Abstract:
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14…
▽ More
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.
△ Less
Submitted 24 September, 2024; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Ariel: Enabling planetary science across light-years
Authors:
Giovanna Tinetti,
Paul Eccleston,
Carole Haswell,
Pierre-Olivier Lagage,
Jérémy Leconte,
Theresa Lüftinger,
Giusi Micela,
Michel Min,
Göran Pilbratt,
Ludovic Puig,
Mark Swain,
Leonardo Testi,
Diego Turrini,
Bart Vandenbussche,
Maria Rosa Zapatero Osorio,
Anna Aret,
Jean-Philippe Beaulieu,
Lars Buchhave,
Martin Ferus,
Matt Griffin,
Manuel Guedel,
Paul Hartogh,
Pedro Machado,
Giuseppe Malaguti,
Enric Pallé
, et al. (293 additional authors not shown)
Abstract:
Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths.…
▽ More
Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths. It is the first mission dedicated to measuring the chemical composition and thermal structures of hundreds of transiting exoplanets, enabling planetary science far beyond the boundaries of the Solar System. The payload consists of an off-axis Cassegrain telescope (primary mirror 1100 mm x 730 mm ellipse) and two separate instruments (FGS and AIRS) covering simultaneously 0.5-7.8 micron spectral range. The satellite is best placed into an L2 orbit to maximise the thermal stability and the field of regard. The payload module is passively cooled via a series of V-Groove radiators; the detectors for the AIRS are the only items that require active cooling via an active Ne JT cooler. The Ariel payload is developed by a consortium of more than 50 institutes from 16 ESA countries, which include the UK, France, Italy, Belgium, Poland, Spain, Austria, Denmark, Ireland, Portugal, Czech Republic, Hungary, the Netherlands, Sweden, Norway, Estonia, and a NASA contribution.
△ Less
Submitted 10 April, 2021;
originally announced April 2021.
-
Fast-neutron induced background in LaBr3:Ce detectors
Authors:
J. Kiener,
V. Tatischeff,
I. Deloncle,
N. de Séréville,
P. Laurent,
C. Blondel,
M. Chabot,
R. Chipaux,
A. Coc,
S. Dubos,
A. Gostojic,
N. Goutev,
C. Hamadache,
F. Hammache,
B. Horeau,
O. Limousin,
S. Ouichaoui,
G. Prévot,
R. Rodríguez-Gasén,
M. S. Yavahchova
Abstract:
The response of a scintillation detector with a cylindrical 1.5-inch LaBr3:Ce crystal to incident neutrons has been measured in the energy range En = 2-12 MeV. Neutrons were produced by proton irradiation of a Li target at Ep = 5-14.6 MeV with pulsed proton beams. Using the time-of-flight information between target and detector, energy spectra of the LaBr3:Ce detector resulting from fast neutron i…
▽ More
The response of a scintillation detector with a cylindrical 1.5-inch LaBr3:Ce crystal to incident neutrons has been measured in the energy range En = 2-12 MeV. Neutrons were produced by proton irradiation of a Li target at Ep = 5-14.6 MeV with pulsed proton beams. Using the time-of-flight information between target and detector, energy spectra of the LaBr3:Ce detector resulting from fast neutron interactions have been obtained at 4 different neutron energies. Neutron-induced gamma rays emitted by the LaBr3:Ce crystal were also measured in a nearby Ge detector at the lowest proton beam energy. In addition, we obtained data for neutron irradiation of a large-volume high-purity Ge detector and of a NE-213 liquid scintillator detector, both serving as monitor detectors in the experiment. Monte-Carlo type simulations for neutron interactions in the liquid scintillator, the Ge and LaBr3:Ce crystals have been performed and compared with measured data. Good agreement being obtained with the data, we present the results of simulations to predict the response of LaBr3:Ce detectors for a range of crystal sizes to neutron irradiation in the energy range En = 0.5-10 MeV
△ Less
Submitted 1 December, 2015;
originally announced December 2015.
-
Hard X-ray polarimetry with Caliste, a high performance CdTe based imaging spectrometer
Authors:
S. Antier,
P. Ferrando,
O. Limousin,
E. Caroli,
R. M. Curado da Silva,
C. Blondel,
R. Chipaux,
V. Honkimaki,
B. Horeau,
P. Laurent,
J. M. Maia,
A. Meuris,
S. Del Sordo,
J. B. Stephen
Abstract:
Since the initial exploration of soft gamma-ray sky in the 60's, high-energy celestial sources have been mainly characterized through imaging, spectroscopy and timing analysis. Despite tremendous progress in the field, the radiation mechanisms at work in sources such as neutrons stars and black holes are still unclear. The polarization state of the radiation is an observational parameter which bri…
▽ More
Since the initial exploration of soft gamma-ray sky in the 60's, high-energy celestial sources have been mainly characterized through imaging, spectroscopy and timing analysis. Despite tremendous progress in the field, the radiation mechanisms at work in sources such as neutrons stars and black holes are still unclear. The polarization state of the radiation is an observational parameter which brings key additional information about the physical process. This is why most of the projects for the next generation of space missions covering the tens of keV to the MeV region require a polarization measurement capability. A key element enabling this capability is a detector system allowing the identification and characterization of Compton interactions as they are the main process at play. The hard X-ray imaging spectrometer module, developed in CEA with the generic name of Caliste module, is such a detector. In this paper, we present experimental results for two types of Caliste-256 modules, one based on a CdTe crystal, the other one on a CdZnTe crystal, which have been exposed to linearly polarized beams at the European Synchrotron Radiation Facility. These results, obtained at 200-300 keV, demonstrate their capability to give an accurate determination of the polarization parameters (polarization angle and fraction) of the incoming beam. Applying a selection to our data set, equivalent to select 90 degrees Compton scattered interactions in the detector plane, we find a modulation factor Q of 0.78. The polarization angle and fraction are derived with accuracies of approximately 1 degree and 5%. The modulation factor remains larger than 0.4 when essentially no selection is made at all on the data. These results prove that the Caliste-256 modules have performances allowing them to be excellent candidates as detectors with polarimetric capabilities, in particular for future space missions.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Impacts of The Radiation Environment At L2 On Bolometers Onboard The Herschel Space Observatory
Authors:
Benoît Horeau,
Olivier Boulade,
Arnaud Claret,
Helmut Feuchtgruber,
Koryo Okumura,
Pasquale Panuzzo,
Andrea Papageorgiou,
Vincent Revéret,
Louis Rodriguez,
Marc Sauvage
Abstract:
We present the effects of cosmic rays on the detectors onboard the Herschel satellite. We describe in particular the glitches observed on the two types of cryogenic far- infrared bolometer inside the two instruments PACS and SPIRE. The glitch rates are also reported since the launch together with the SREM radiation monitors aboard Herschel and Planck spacecrafts. Both have been injected around the…
▽ More
We present the effects of cosmic rays on the detectors onboard the Herschel satellite. We describe in particular the glitches observed on the two types of cryogenic far- infrared bolometer inside the two instruments PACS and SPIRE. The glitch rates are also reported since the launch together with the SREM radiation monitors aboard Herschel and Planck spacecrafts. Both have been injected around the Lagrangian point L2 on May 2009. This allows probing the radiation environment around this orbit. The impacts on the observation are finally summarized.
△ Less
Submitted 24 July, 2012;
originally announced July 2012.
-
CEA Bolometer Arrays: the First Year in Space
Authors:
Nicolas Billot,
M. Sauvage,
L. Rodriguez,
B. Horeau,
C. Kiss,
H. Aussel,
K. Okumura,
O. Boulade,
B. Altieri,
A. Poglitsch,
P. Agnese
Abstract:
The CEA/LETI and CEA/SAp started the development of far-infrared filled bolometer arrays for space applications over a decade ago. The unique design of these detectors makes possible the assembling of large focal planes comprising thousands of bolometers running at 300 mK with very low power dissipation. Ten arrays of 16x16 pixels were thoroughly tested on the ground, and integrated in the Hersche…
▽ More
The CEA/LETI and CEA/SAp started the development of far-infrared filled bolometer arrays for space applications over a decade ago. The unique design of these detectors makes possible the assembling of large focal planes comprising thousands of bolometers running at 300 mK with very low power dissipation. Ten arrays of 16x16 pixels were thoroughly tested on the ground, and integrated in the Herschel/PACS instrument before launch in May 2009. These detectors have been successfully commissioned and are now operating in their nominal environment at the second Lagrangian point of the Earth-Sun system. In this paper we briefly explain the functioning of CEA bolometer arrays, and we present the properties of the detectors focusing on their noise characteristics, the effect of cosmic rays on the signal, the repeatability of the measurements, and the stability of the system.
△ Less
Submitted 13 July, 2010;
originally announced July 2010.
-
Unveiling Far-Infrared Counterparts of Bright Submillimeter Galaxies Using PACS Imaging
Authors:
H. Dannerbauer,
E. Daddi,
G. E. Morrison,
B. Altieri,
P. Andreani,
H. Aussel,
S. Berta,
A. Bongiovanni,
A. Cava,
J. Cepa,
A. Cimatti,
H. Dominguez,
D. Elbaz,
N. Forster Schreiber,
R. Genzel,
C. Gruppioni,
B. Horeau,
H. S. Hwang,
E. Le Floc'h,
J. Le Pennec,
D. Lutz,
G. Magdis,
B. Magnelli,
R. Maiolino,
R. Nordon
, et al. (13 additional authors not shown)
Abstract:
We present a search for Herschel-PACS counterparts of dust-obscured, high-redshift objects previously selected at submillimeter and millimeter wavelengths in the Great Observatories Origins Deep Survey North field. We detect 22 of 56 submillimeter galaxies (39%) with a SNR of >=3 at 100 micron down to 3.0 mJy, and/or at 160 micron down to 5.7 mJy. The fraction of SMGs seen at 160 micron is higher…
▽ More
We present a search for Herschel-PACS counterparts of dust-obscured, high-redshift objects previously selected at submillimeter and millimeter wavelengths in the Great Observatories Origins Deep Survey North field. We detect 22 of 56 submillimeter galaxies (39%) with a SNR of >=3 at 100 micron down to 3.0 mJy, and/or at 160 micron down to 5.7 mJy. The fraction of SMGs seen at 160 micron is higher than that at 100 micron. About 50% of radio-identified SMGs are associated with PACS sources. We find a trend between the SCUBA/PACS flux ratio and redshift, suggesting that these flux ratios could be used as a coarse redshift indicator. PACS undetected submm/mm selected sources tend to lie at higher redshifts than the PACS detected ones. A total of 12 sources (21% of our SMG sample) remain unidentified and the fact that they are blank fields at Herschel-PACS and VLA 20 cm wavelength may imply higher redshifts for them than for the average SMG population (e.g., z>3-4). The Herschel-PACS imaging of these dust-obscured starbursts at high-redshifts suggests that their far-infrared spectral energy distributions have significantly different shapes than template libraries of local infrared galaxies.
△ Less
Submitted 12 July, 2010;
originally announced July 2010.
-
Irradiation tests performed on the Herschel/Pacs bolometer arrays
Authors:
B. Horeau,
A. Claret,
L. Rodriguez,
N. Billot,
O. Boulade,
E. Doumayrou,
K. Okumura,
J. Le Pennec
Abstract:
A new concept of bolometer arrays is used for the imager of PACS, one of the three instruments aboard the future Herschel space observatory. Within the framework of PACS photometer characterization, irradiation tests were performed on a dedicated bolometer array in order to study long-term and short-term radiation effects. The main objective was to study particles impacts on the detectors applicab…
▽ More
A new concept of bolometer arrays is used for the imager of PACS, one of the three instruments aboard the future Herschel space observatory. Within the framework of PACS photometer characterization, irradiation tests were performed on a dedicated bolometer array in order to study long-term and short-term radiation effects. The main objective was to study particles impacts on the detectors applicable to future observations in orbit and possible hard and/or soft curing to restore its performances. Cobalt-60 gamma ray irradiations did not show significant degradation, so we mainly focused on single events effects (SEE). Protons and alphas irradiations were then performed at the Van de Graaf tandem accelerator at the Institut de Physique Nucleaire (IPN, Orsay, France), respectively at 20MeV and 30MeV. Observation showed that the shape of signal perturbations clearly depends on the location of the impacts either on the detector itself or the read-out circuit. Software curing has then to be anticipated in order to deglitch the signal. This test gives also a unique opportunity to measure some parameters of the detector: electrical crosstalk and thermo- electrical time constant. However a detailed bolometer model is necessary to understand the contribution of the thermal response in relation with the electrical response. It will be the second step of our study. Finally the complete radiation evaluation proved that this detector can be used in spatial experiments.
△ Less
Submitted 22 June, 2010;
originally announced June 2010.
-
Herschel observations of embedded protostellar clusters in the Rosette Molecular Cloud
Authors:
M. Hennemann,
F. Motte,
S. Bontemps,
N. Schneider,
T. Csengeri,
Z. Balog,
J. Di Francesco,
A. Zavagno,
Ph. André,
A. Men'shchikov,
A. Abergel,
B. Ali,
J. -P. Baluteau,
J. -Ph. Bernard,
P. Cox,
P. Didelon,
A. -M. di Giorgio,
M. Griffin,
P. Hargrave,
T. Hill,
B. Horeau,
M. Huang,
J. Kirk,
S. Leeks,
J. Z. Li
, et al. (17 additional authors not shown)
Abstract:
The Herschel OB young stellar objects survey (HOBYS) has observed the Rosette molecular cloud, providing an unprecedented view of its star formation activity. These new far-infrared data reveal a population of compact young stellar objects whose physical properties we aim to characterise. We compiled a sample of protostars and their spectral energy distributions that covers the near-infrared to su…
▽ More
The Herschel OB young stellar objects survey (HOBYS) has observed the Rosette molecular cloud, providing an unprecedented view of its star formation activity. These new far-infrared data reveal a population of compact young stellar objects whose physical properties we aim to characterise. We compiled a sample of protostars and their spectral energy distributions that covers the near-infrared to submillimetre wavelength range. These were used to constrain key properties in the protostellar evolution, bolometric luminosity, and envelope mass and to build an evolutionary diagram. Several clusters are distinguished including the cloud centre, the embedded clusters in the vicinity of luminous infrared sources, and the interaction region. The analysed protostellar population in Rosette ranges from 0.1 to about 15 Msun with luminosities between 1 and 150 Lsun, which extends the evolutionary diagram from low-mass protostars into the high-mass regime. Some sources lack counterparts at near- to mid-infrared wavelengths, indicating extreme youth. The central cluster and the Phelps & Lada 7 cluster appear less evolved than the remainder of the analysed protostellar population. For the central cluster, we find indications that about 25% of the protostars classified as Class I from near- to mid-infrared data are actually candidate Class 0 objects. As a showcase for protostellar evolution, we analysed four protostars of low- to intermediate-mass in a single dense core, and they represent different evolutionary stages from Class 0 to Class I. Their mid- to far-infrared spectral slopes flatten towards the Class I stage, and the 160 to 70um flux ratio is greatest for the presumed Class 0 source. This shows that the Herschel observations characterise the earliest stages of protostellar evolution in detail.
△ Less
Submitted 18 May, 2010;
originally announced May 2010.
-
Simulations of Galactic Cosmic Ray Impacts on the Herschel/PACS bolometer Arrays with Geant4 Code
Authors:
C. Bongardo,
P. M. Andreani,
K. Okumura,
B. Horeau,
A. Claret,
G. De Zotti,
R. Giannitrapani,
F. Longo
Abstract:
The effects of the in-flight behaviour of the bolometer arrays of the Herschel/PACS instrument under impacts of Galactic cosmic rays are explored. This instrument is part of the ESA-Herschel payload, which will be launched at the end of 2008 and will operate at the Lagrangian L2 point of the Sun-Earth system. We find that the components external to the detectors (the spacecraft, the cryostat, th…
▽ More
The effects of the in-flight behaviour of the bolometer arrays of the Herschel/PACS instrument under impacts of Galactic cosmic rays are explored. This instrument is part of the ESA-Herschel payload, which will be launched at the end of 2008 and will operate at the Lagrangian L2 point of the Sun-Earth system. We find that the components external to the detectors (the spacecraft, the cryostat, the PACS box, collectively referred to as the `shield') are the major source of secondary events affecting the detector behaviour. The impacts deposit energy on the bolometer chips and influence the behaviour of nearby pixels. 25% of hits affect the adjacent pixels. The energy deposited raises the bolometer temperature by a factor ranging from 1 to 6 percent of the nominal value. We discuss the effects on the observations and compare simulations with laboratory tests.
△ Less
Submitted 30 June, 2008;
originally announced June 2008.
-
The Herschel/PACS 2560 bolometers imaging camera
Authors:
Nicolas Billot,
Patrick Agnese,
Jean-Louis Augueres,
Alain Beguin,
Andre Bouere,
Olivier Boulade,
Christophe Cara,
Christelle Cloue,
Eric Doumayrou,
Lionel Duband,
Benoit Horeau,
Isabelle Le Mer,
Jean Le Pennec,
Jerome Martignac,
Koryo Okumura,
Vincent Reveret,
Marc Sauvage,
Francois Simoens,
Laurent Vigroux
Abstract:
The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelengt…
▽ More
The development program of the flight model imaging camera for the PACS instrument on-board the Herschel spacecraft is nearing completion. This camera has two channels covering the 60 to 210 microns wavelength range. The focal plane of the short wavelength channel is made of a mosaic of 2x4 3-sides buttable bolometer arrays (16x16 pixels each) for a total of 2048 pixels, while the long wavelength channel has a mosaic of 2 of the same bolometer arrays for a total of 512 pixels. The 10 arrays have been fabricated, individually tested and integrated in the photometer. They represent the first filled arrays of fully collectively built bolometers with a cold multiplexed readout, allowing for a properly sampled coverage of the full instrument field of view. The camera has been fully characterized and the ground calibration campaign will take place after its delivery to the PACS consortium in mid 2006. The bolometers, working at a temperature of 300 mK, have a NEP close to the BLIP limit and an optical bandwidth of 4 to 5 Hz that will permit the mapping of large sky areas. This paper briefly presents the concept and technology of the detectors as well as the cryocooler and the warm electronics. Then we focus on the performances of the integrated focal planes (responsivity, NEP, low frequency noise, bandwidth).
△ Less
Submitted 26 June, 2006;
originally announced June 2006.
-
A study on the use of the PACS bolometer arrays for submillimeter ground-based telescopes
Authors:
Vincent Reveret,
Louis R. Rodriguez,
Philippe Andre,
Benoit Horeau,
Jean Le Pennec,
Patrick Agnese
Abstract:
A new kind of bolometric architecture has been successfully developed for the PACS photometer onboard the Herschel submillimeter observatory. These new generation CCD-like arrays are buttable and enable the conception of large fully sampled focal planes. We present a feasibility study of the adaptation of these bolometer arrays to ground-based submillimeter telescopes. We have developed an elect…
▽ More
A new kind of bolometric architecture has been successfully developed for the PACS photometer onboard the Herschel submillimeter observatory. These new generation CCD-like arrays are buttable and enable the conception of large fully sampled focal planes. We present a feasibility study of the adaptation of these bolometer arrays to ground-based submillimeter telescopes. We have developed an electro-thermal numerical model to simulate the performances of the bolometers under specific ground-based conditions (different wavelengths and background powers for example). This simulation permits to determine the optimal parameters for each condition and shows that the bolometers can be background limited in each transmission window between 200 and 450 microns. We also present a new optical system that enables to have a maximum absorption of the bolometer in each atmospheric windows. The description of this system and measurements are showed.
△ Less
Submitted 18 June, 2006;
originally announced June 2006.
-
Recent Achievements on the development of the Herschel/PACS Bolometer arrays
Authors:
N. Billot,
P. Agnese,
O. Boulade,
C. Cigna,
E. Doumeyrou,
B. Horeau,
J. Lepennec,
J. Martignac,
J. -L. Pornin,
V. Reveret,
L. Rodriguez,
M. Sauvage,
F. Simoens,
L. Vigroux
Abstract:
A new type of bolometer arrays sensitive in the Far Infrared and Submillimeter range has been developped and manufactured by CEA/LETI/SLIR and will be integrated in the PACS instrument onboard the Herschel Space Observatory (launch date 2008). The main innovations are their collective manufacturing technique (production of 3-side buttable 16x16 arrays) and their high mapping efficiency (large fo…
▽ More
A new type of bolometer arrays sensitive in the Far Infrared and Submillimeter range has been developped and manufactured by CEA/LETI/SLIR and will be integrated in the PACS instrument onboard the Herschel Space Observatory (launch date 2008). The main innovations are their collective manufacturing technique (production of 3-side buttable 16x16 arrays) and their high mapping efficiency (large format detector and instantaneous Nyquist sampling). Their measured NEP is 2x10^-16 W/Hz^-0.5 and their thermometric passband about 4-5 Hz. In this paper we describe CEA bolometers and present the results obtained during the last test campaign.
△ Less
Submitted 3 March, 2006;
originally announced March 2006.
-
IDeF-X ASIC for Cd(Zn)Te spectro-imaging systems
Authors:
O. Limousin,
O. Gevin,
F. Lugiez,
R. Chipaux,
E. Delagnes,
B. Dirks,
B. Horeau
Abstract:
Joint progresses in Cd(Zn)Te detectors, microelectronics and interconnection technologies open the way for a new generation of instruments for physics and astrophysics applications in the energy range from 1 to 1000 keV. Even working between -20 and 20 degrees Celsius, these instruments will offer high spatial resolution (pixel size ranging from 300 x 300 square micrometers to few square millime…
▽ More
Joint progresses in Cd(Zn)Te detectors, microelectronics and interconnection technologies open the way for a new generation of instruments for physics and astrophysics applications in the energy range from 1 to 1000 keV. Even working between -20 and 20 degrees Celsius, these instruments will offer high spatial resolution (pixel size ranging from 300 x 300 square micrometers to few square millimeters), high spectral response and high detection efficiency. To reach these goals, reliable, highly integrated, low noise and low power consumption electronics is mandatory. Our group is currently developing a new ASIC detector front-end named IDeF-X, for modular spectro-imaging system based on the use of Cd(Zn)Te detectors. We present here the first version of IDeF-X which consists in a set of ten low noise charge sensitive preamplifiers (CSA). It has been processed with the standard AMS 0.35 micrometer CMOS technology. The CSA are designed to be DC coupled to detectors having a low dark current at room temperature. The various preamps implemented are optimized for detector capacitances ranging from 0.5 up to 30 pF.
△ Less
Submitted 24 November, 2004; v1 submitted 19 November, 2004;
originally announced November 2004.
-
ISGRI: the INTEGRAL Soft Gamma-Ray Imager
Authors:
F. Lebrun,
J. -P. Leray,
P. Lavocat,
J. Cretolle,
M. Arques,
C. Blondel,
C. Bonnin,
A. Bouere,
C. Cara,
T. Chaleil,
F. Daly,
F. Desages,
H. Dzitko,
B. Horeau,
P. Laurent,
O. Limousin,
F. Mathy,
V. Mauguen,
F. Meignier,
F. Molinie,
E. Poindron,
M. Rouger,
A. Sauvageon,
T. Tourette
Abstract:
For the first time in the history of high energy astronomy, a large CdTe gamma-ray camera is operating in space. ISGRI is the low-energy camera of the IBIS telescope on board the INTEGRAL satellite. This paper details its design and its in-flight behavior and performances. Having a sensitive area of 2621 cm$^2$ with a spatial resolution of 4.6 mm, a low threshold around 12 keV and an energy reso…
▽ More
For the first time in the history of high energy astronomy, a large CdTe gamma-ray camera is operating in space. ISGRI is the low-energy camera of the IBIS telescope on board the INTEGRAL satellite. This paper details its design and its in-flight behavior and performances. Having a sensitive area of 2621 cm$^2$ with a spatial resolution of 4.6 mm, a low threshold around 12 keV and an energy resolution of $\sim$ 8% at 60 keV, ISGRI shows absolutely no signs of degradation after 9 months in orbit. All aspects of its in-flight behavior and scientific performance are fully nominal, and in particular the observed background level confirms the expected sensitivity of 1 milliCrab for a 10$^6$s observation.
△ Less
Submitted 14 October, 2003;
originally announced October 2003.
