-
Automated Deep Neural Network Inference Partitioning for Distributed Embedded Systems
Authors:
Fabian Kreß,
El Mahdi El Annabi,
Tim Hotfilter,
Julian Hoefer,
Tanja Harbaum,
Juergen Becker
Abstract:
Distributed systems can be found in various applications, e.g., in robotics or autonomous driving, to achieve higher flexibility and robustness. Thereby, data flow centric applications such as Deep Neural Network (DNN) inference benefit from partitioning the workload over multiple compute nodes in terms of performance and energy-efficiency. However, mapping large models on distributed embedded sys…
▽ More
Distributed systems can be found in various applications, e.g., in robotics or autonomous driving, to achieve higher flexibility and robustness. Thereby, data flow centric applications such as Deep Neural Network (DNN) inference benefit from partitioning the workload over multiple compute nodes in terms of performance and energy-efficiency. However, mapping large models on distributed embedded systems is a complex task, due to low latency and high throughput requirements combined with strict energy and memory constraints. In this paper, we present a novel approach for hardware-aware layer scheduling of DNN inference in distributed embedded systems. Therefore, our proposed framework uses a graph-based algorithm to automatically find beneficial partitioning points in a given DNN. Each of these is evaluated based on several essential system metrics such as accuracy and memory utilization, while considering the respective system constraints. We demonstrate our approach in terms of the impact of inference partitioning on various performance metrics of six different DNNs. As an example, we can achieve a 47.5 % throughput increase for EfficientNet-B0 inference partitioned onto two platforms while observing high energy-efficiency.
△ Less
Submitted 11 October, 2024; v1 submitted 28 June, 2024;
originally announced June 2024.
-
Signatures of ballistic and diffusive transport in the time-dependent Kerr-response of magnetic materials
Authors:
Sanjay Ashok,
Jonas Hoefer,
Martin Stiehl,
Martin Aeschlimann,
Hans Christian Schneider,
Baerbel Rethfeld,
Benjamin Stadtmueller
Abstract:
We calculate the influence of diffusive and ballistic transport on ultrafast magnetization in thick metallic films. When only diffusive transport is present, gradients of magnetization in the material remain up to picosecond timescales. In contrast, in the extreme superdiffusive limit where ballistic transport dominates, the magnetization changes homogeneously in space. We calculate the measurable…
▽ More
We calculate the influence of diffusive and ballistic transport on ultrafast magnetization in thick metallic films. When only diffusive transport is present, gradients of magnetization in the material remain up to picosecond timescales. In contrast, in the extreme superdiffusive limit where ballistic transport dominates, the magnetization changes homogeneously in space. We calculate the measurable magneto-optical responses for a $\SI{40}{\nano\meter}$ Nickel film. Although the resulting Kerr rotation dynamics are found to be very similar in the two limits of transport, our simulations reveal a clear signature of magnetization gradients in the Kerr ellipticity dynamics, namely a strong probe-angle dependence for the case when diffusive transport allows gradients to persist. We then perform probe-angle dependent complex magneto-optical Kerr effect (CMOKE) measurements on an excited \SI{40}{\nano\meter} Nickel film. The angle dependence of the measured Kerr signals closely matches the simulated response with diffusive transport. Therefore we conclude that the influence of ballistic transport on ultrafast magnetization dynamics in such films is negligible.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
A numerical approach to levitated superconductors and its application to a superconducting cylinder in a quadrupole field
Authors:
Joachim Hofer
Abstract:
Magnetically levitated superconductors in the Meissner state can be utilized as micro-mechanical oscillators with large mass, high quality factors and long coherence times. In previous works analytical solutions for the magnetic field distribution around a superconducting sphere in a quadrupole field have been found and used to derive the trap parameters, while non-spherical geometries have only b…
▽ More
Magnetically levitated superconductors in the Meissner state can be utilized as micro-mechanical oscillators with large mass, high quality factors and long coherence times. In previous works analytical solutions for the magnetic field distribution around a superconducting sphere in a quadrupole field have been found and used to derive the trap parameters, while non-spherical geometries have only been investigated in a few idealized cases. However, superconductors of almost arbitrary shape can be used as levitators in a magnetic trap and, as the trap's properties depend strongly on the superconductors shape, allow for a wider parameter regime to be accessed. Finite element models are suitable to obtain the field distribution around arbitrarily shaped superconductors in arbitrary fields, but have not yet been used widely in the context of levitated superconductors. Here we present a simple numerical model for this purpose and use it to calculate the field distribution around cylindrical superconductors in a quadrupole field and to evaluate the trap parameters. We find that the cylindrical shape, compared to spherical levitators, allows for substantially higher trap frequencies and coupling strengths. This in turn reduces the demands on vibration isolation and significantly eases the requirements for feedback cooling to the ground state. The numerical model is provided as supplemental material and can easily be adapted to various geometries and trap fields.
△ Less
Submitted 18 April, 2024; v1 submitted 17 April, 2024;
originally announced April 2024.
-
Heat transport at the nanoscale and ultralow temperatures -- implications for quantum technologies
Authors:
Danial Majidi,
Justin P. Bergfield,
Ville Maisi,
Johannes Höfer,
Hervé Courtois,
Clemens B. Winkelmann
Abstract:
In this perspective, we discuss thermal imbalance and the associated electron-mediated thermal transport in quantum electronic devices at very low temperatures. We first present the theoretical approaches describing heat transport in nanoscale conductors at low temperatures, in which quantum confinement and interactions play an important role. We then discuss the experimental techniques for genera…
▽ More
In this perspective, we discuss thermal imbalance and the associated electron-mediated thermal transport in quantum electronic devices at very low temperatures. We first present the theoretical approaches describing heat transport in nanoscale conductors at low temperatures, in which quantum confinement and interactions play an important role. We then discuss the experimental techniques for generating and measuring heat currents and temperature gradients on the nanoscale. Eventually we review the most important quantum effects on heat transport, and discuss implications for quantum technologies and future directions in the field.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Remote sensing of a levitated superconductor with a flux-tunable microwave cavity
Authors:
Philip Schmidt,
Remi Claessen,
Gerard Higgins,
Joachim Hofer,
Jannek J. Hansen,
Peter Asenbaum,
Kevin Uhl,
Reinhold Kleiner,
Rudolf Gross,
Hans Huebl,
Michael Trupke,
Markus Aspelmeyer
Abstract:
We present a cavity-electromechanical system comprising a superconducting quantum interference device which is embedded in a microwave resonator and coupled via a pick-up loop to a 6 $μ$g magnetically-levitated superconducting sphere. The motion of the sphere in the magnetic trap induces a frequency shift in the SQUID-cavity system. We use microwave spectroscopy to characterize the system, and we…
▽ More
We present a cavity-electromechanical system comprising a superconducting quantum interference device which is embedded in a microwave resonator and coupled via a pick-up loop to a 6 $μ$g magnetically-levitated superconducting sphere. The motion of the sphere in the magnetic trap induces a frequency shift in the SQUID-cavity system. We use microwave spectroscopy to characterize the system, and we demonstrate that the electromechanical interaction is tunable. The measured displacement sensitivity of $10^{-7} \, \mathrm{m} / \sqrt{\mathrm{Hz}}$, defines a path towards ground-state cooling of levitated particles with Planck-scale masses at millikelvin environment temperatures.
△ Less
Submitted 1 August, 2024; v1 submitted 16 January, 2024;
originally announced January 2024.
-
Co-Simulation Framework For Network Attack Generation and Monitoring
Authors:
Oceane Bel,
Joonseok Kim,
William J Hofer,
Manisha Maharjan,
Sumit Purohit,
Shwetha Niddodi
Abstract:
Resilience assessment is a critical requirement of a power grid to maintain high availability, security, and quality of service. Most grid research work that is currently pursued does not have the capability to have hardware testbeds. Additionally, with the integration of distributed energy resources, the attack surface of the grid is increasing. This increases the need for reliable and realistic…
▽ More
Resilience assessment is a critical requirement of a power grid to maintain high availability, security, and quality of service. Most grid research work that is currently pursued does not have the capability to have hardware testbeds. Additionally, with the integration of distributed energy resources, the attack surface of the grid is increasing. This increases the need for reliable and realistic modeling techniques that are usable by the wider research community. Therefore, simulation testbeds have been used to model a real-world power grid topology and measure the impact of various perturbations.
Existing co-simulation platforms for powergrid focus on a limited components of the overall system, such as focusing only on the dynamics of the physical layer. Additionally a significant number of existing platforms need specialized hardware that may be too expensive for most researchers. Finally, not many platforms support realistic modeling of the communication layer, which requires use of Supervisory Control and Data Acquisition communication protocol such as DNP3 while modeling cybersecurity scenarios.
We present Network Attack Testbed in [Power] Grid (NATI[P]G), (pronounced natig), a standalone, containerized, and reusable environment to enable cyber analysts and researchers to run different cybersecurity and performance scenarios on powergrid. Our tool combines GridLAB-D, a grid simulator, HELICS, a co-simulation framework, and NS-3, a network simulator, to create an end-to-end simulation environment for the power grid. We demonstrate use cases by generating a library of datasets for several scenarios. These datasets can be used to detect cyberattacks at the cyber layer, and develop counter measures to these adverse scenarios.
△ Less
Submitted 30 June, 2023;
originally announced July 2023.
-
$α$-$β$-Factorization and the Binary Case of Simon's Congruence
Authors:
Pamela Fleischmann,
Jonas Höfer,
Annika Huch,
Dirk Nowotka
Abstract:
In 1991 Hébrard introduced a factorization of words that turned out to be a powerful tool for the investigation of a word's scattered factors (also known as (scattered) subwords or subsequences). Based on this, first Karandikar and Schnoebelen introduced the notion of $k$-richness and later on Barker et al. the notion of $k$-universality. In 2022 Fleischmann et al. presented a generalization of th…
▽ More
In 1991 Hébrard introduced a factorization of words that turned out to be a powerful tool for the investigation of a word's scattered factors (also known as (scattered) subwords or subsequences). Based on this, first Karandikar and Schnoebelen introduced the notion of $k$-richness and later on Barker et al. the notion of $k$-universality. In 2022 Fleischmann et al. presented a generalization of the arch factorization by intersecting the arch factorization of a word and its reverse. While the authors merely used this factorization for the investigation of shortest absent scattered factors, in this work we investigate this new $α$-$β$-factorization as such. We characterize the famous Simon congruence of $k$-universal words in terms of $1$-universal words. Moreover, we apply these results to binary words. In this special case, we obtain a full characterization of the classes and calculate the index of the congruence. Lastly, we start investigating the ternary case, present a full list of possibilities for $αβα$-factors, and characterize their congruence.
△ Less
Submitted 11 September, 2023; v1 submitted 25 June, 2023;
originally announced June 2023.
-
Laser written mirror profiles for open-access fiber Fabry-Pérot microcavities
Authors:
Jannis Hessenauer,
Ksenia Weber,
Julia Benedikter,
Timo Gissibl,
Johannes Höfer,
Harald Giessen,
David Hunger
Abstract:
We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical fibers that serve as mirror substrates for tunable open-access microcavities. We achieve finesse values of up to 250, and a mostly constant performance across the entire stability range. This enables cavity operation also close to the stability limit, where a peak quality factor of $1.5\times 10^4$ i…
▽ More
We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical fibers that serve as mirror substrates for tunable open-access microcavities. We achieve finesse values of up to 250, and a mostly constant performance across the entire stability range. This enables cavity operation also close to the stability limit, where a peak quality factor of $1.5\times 10^4$ is reached. Together with a small mode waist of $2.3\; \mathrm{μm}$, the cavity achieves a Purcell factor of $C \sim 2.5$, which is useful for experiments that require good lateral optical access or otherwise large separation of the mirrors. Laser-written mirror profiles can be produced with a tremendous flexibility in shape and on various surfaces, opening new possibilities for microcavities.
△ Less
Submitted 25 November, 2022;
originally announced November 2022.
-
High-Q magnetic levitation and control of superconducting microspheres at millikelvin temperatures
Authors:
Joachim Hofer,
Rudolf Gross,
Gerard Higgins,
Hans Huebl,
Oliver F. Kieler,
Reinhold Kleiner,
Dieter Koelle,
Philip Schmidt,
Joshua A. Slater,
Michael Trupke,
Kevin Uhl,
Thomas Weimann,
Witlef Wieczorek,
Markus Aspelmeyer
Abstract:
We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well…
▽ More
We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6e7. We also demonstrate 3D magnetic feedback control of the sphere's motion. The setup is housed in a dilution refrigerator operating at 15 millikelvin. By implementing a cryogenic vibration isolation system we can attenuate environmental vibrations at 200 hertz by approximately seven orders of magnitude. The combination of low temperature, large mass and high quality factor as well as adjustable resonance frequencies provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.
△ Less
Submitted 1 August, 2023; v1 submitted 11 November, 2022;
originally announced November 2022.
-
Hasimoto Transformation of General Flows Expressed in the Frenet Frame
Authors:
Jacob S. Hofer,
Scott A. Strong
Abstract:
A one-dimensional space curve in $\mathbb{R}^{3}$ is a useful nonlinear medium for modeling vortex filaments and biological soft-matter capable of supporting a variety of wave motions. The Hasimoto transformation defines a mapping between the kinematic evolution of a space curve and nonlinear scalar equations evolving its intrinsic curve geometry. This mapping is quite robust and able to transform…
▽ More
A one-dimensional space curve in $\mathbb{R}^{3}$ is a useful nonlinear medium for modeling vortex filaments and biological soft-matter capable of supporting a variety of wave motions. The Hasimoto transformation defines a mapping between the kinematic evolution of a space curve and nonlinear scalar equations evolving its intrinsic curve geometry. This mapping is quite robust and able to transform general vector fields expressed in the Frenet frame, resulting in a fully nonlinear integro-differential evolution equation, whose coefficient structure is defined by the coordinates of the flow in the Frenet frame. In this paper, we generalize the Hasimoto map to arbitrary flows defined on space curves, which we test against several existing kinematic flows. After this, we consider the time dynamics of length and bending energy to see that binormal flows are generally length preserving, and bending energy is fragile and unlikely to be conserved in the general case.
△ Less
Submitted 1 October, 2022;
originally announced October 2022.
-
Comparing Confidence Intervals for a Binomial Proportion with the Interval Score
Authors:
Lisa J. Hofer,
Leonhard Held
Abstract:
There are over 55 different ways to construct a confidence respectively credible interval (CI) for the binomial proportion. Methods to compare them are necessary to decide which should be used in practice. The interval score has been suggested to compare prediction intervals. This score is a proper scoring rule that combines the coverage as a measure of calibration and the width as a measure of sh…
▽ More
There are over 55 different ways to construct a confidence respectively credible interval (CI) for the binomial proportion. Methods to compare them are necessary to decide which should be used in practice. The interval score has been suggested to compare prediction intervals. This score is a proper scoring rule that combines the coverage as a measure of calibration and the width as a measure of sharpness. We evaluate eleven CIs for the binomial proportion based on the expected interval score and propose a summary measure which can take into account different weighting of the underlying true proportion. Under uniform weighting, the expected interval score recommends the Wilson CI or Bayesian credible intervals with a uniform prior. If extremely low or high proportions receive more weight, the score recommends Bayesian credible intervals based on Jeffreys' prior. While more work is needed to theoretically justify the use of the interval score for the comparison of CIs, our results suggest that it constitutes a useful method to combine coverage and width in one measure. This novel approach could also be used in other applications.
△ Less
Submitted 7 July, 2022;
originally announced July 2022.
-
On the Self Shuffle Language
Authors:
Pamela Fleischmann,
Tero Harju,
Lukas Haschke,
Jonas Höfer,
Dirk Nowotka
Abstract:
The shuffle product \(u\shuffle v\) of two words \(u\) and \(v\) is the set of all words which can be obtained by interleaving \(u\) and \(v\). Motivated by the paper \emph{The Shuffle Product: New Research Directions} by Restivo (2015) we investigate a special case of the shuffle product. In this work we consider the shuffle of a word with itself called the \emph{self shuffle} or \emph{shuffle sq…
▽ More
The shuffle product \(u\shuffle v\) of two words \(u\) and \(v\) is the set of all words which can be obtained by interleaving \(u\) and \(v\). Motivated by the paper \emph{The Shuffle Product: New Research Directions} by Restivo (2015) we investigate a special case of the shuffle product. In this work we consider the shuffle of a word with itself called the \emph{self shuffle} or \emph{shuffle square}, showing first that the self shuffle language and the shuffle of the language are in general different sets. We prove that the language of all words arising as a self shuffle of some word is context sensitive but not context free. Furthermore, we show that the self shuffle \(w \shuffle w\) uniquely determines \(w\).
△ Less
Submitted 2 March, 2022; v1 submitted 16 February, 2022;
originally announced February 2022.
-
Nanocrystalline superconducting $γ$-Mo$_2$N ultra-thin films for single-photon detectors
Authors:
J. A. Hofer,
M. Ginzburg,
S. Bengio,
N. Haberkorn
Abstract:
We analyze the influence of the surface passivation produced by oxides on the superconducting properties of $γ$-Mo$_2$N ultra-thin films. The superconducting critical temperature of thin films grown directly on Si (100) with those using a buffer and a capping layer of AlN are compared. The results show that the cover layer avoids the presence of surface oxides, maximizing the superconducting criti…
▽ More
We analyze the influence of the surface passivation produced by oxides on the superconducting properties of $γ$-Mo$_2$N ultra-thin films. The superconducting critical temperature of thin films grown directly on Si (100) with those using a buffer and a capping layer of AlN are compared. The results show that the cover layer avoids the presence of surface oxides, maximizing the superconducting critical temperature for films with thicknesses of a few nanometers. We characterize the flux-flow instability measuring current-voltage curves in a 6.4 nm thick Mo$_2$N film with a superconducting critical temperature of 6.4 K. The data is analyzed using the Larkin and Ovchinnikov model. Considering self-heating effects due to finite heat removal from the substrate, we determine a fast quasiparticle relaxation time $\approx$ 45 ps. This value is promising for its applications in single-photon detectors.
△ Less
Submitted 20 June, 2021;
originally announced June 2021.
-
Chip-based superconducting traps for levitation of micrometer-sized particles in the Meissner state
Authors:
Martí Gutierrez Latorre,
Joachim Hofer,
Matthias Rudolph,
Witlef Wieczorek
Abstract:
We present a detailed analysis of two chip-based superconducting trap architectures capable of levitating micrometer-sized superconducting particles in the Meissner state. These architectures are suitable for performing novel quantum experiments with more massive particles or for force and acceleration sensors of unprecedented sensitivity. We focus in our work on a chip-based anti-Helmholtz coil-t…
▽ More
We present a detailed analysis of two chip-based superconducting trap architectures capable of levitating micrometer-sized superconducting particles in the Meissner state. These architectures are suitable for performing novel quantum experiments with more massive particles or for force and acceleration sensors of unprecedented sensitivity. We focus in our work on a chip-based anti-Helmholtz coil-type trap (AHC) and a planar double-loop (DLP) trap. We demonstrate their fabrication from superconducting Nb films and the fabrication of superconducting particles from Nb or Pb. We apply finite element modeling (FEM) to analyze these two trap architectures in detail with respect to trap stability and frequency. Crucially, in FEM we account for the complete three-dimensional geometry of the traps, finite magnetic field penetration into the levitated superconducting particle, demagnetizing effects, and flux quantization. We can, thus, analyze trap properties beyond assumptions made in analytical models. We find that realistic AHC traps yield trap frequencies well above 10kHz for levitation of micrometer-sized particles and can be fabricated with a three-layer process, while DL traps enable trap frequencies below 1kHz and are simpler to fabricate in a single-layer process. Our numerical results guide future experiments aiming at levitating micrometer-sized particles in the Meissner state with chip-based superconducting traps. The modeling we use is also applicable in other scenarios using superconductors in the Meissner state, such as for designing superconducting magnetic shields or for calculating filling factors in superconducting resonators.
△ Less
Submitted 28 August, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Electrical conductivity in extremely disordered molybdenum oxynitrides thin films
Authors:
J. A. Hofer,
S. Bengio,
G. Rozas,
P. D. Pérez,
M. Sirena,
S. Suárez,
N. Haberkorn
Abstract:
We report on the influence of the chemical composition on the electronic properties of molybdenum oxynitrides thin films grown by reactive sputtering on Si (100) substrates at room temperature. The partial pressure of Ar was fixed at 90 %, and the remaining 10 % was adjusted with mixtures N$_2$:O$_2$ (varying from pure N$_2$ to pure O$_2$). The crystalline and electronic structures and the electri…
▽ More
We report on the influence of the chemical composition on the electronic properties of molybdenum oxynitrides thin films grown by reactive sputtering on Si (100) substrates at room temperature. The partial pressure of Ar was fixed at 90 %, and the remaining 10 % was adjusted with mixtures N$_2$:O$_2$ (varying from pure N$_2$ to pure O$_2$). The crystalline and electronic structures and the electrical transport of the films depend on the chemical composition. Thin films grown using oxygen mixtures up 2 % have gamma-Mo$_2$N phase and display superconductivity. The superconducting critical temperature T$_c$ reduces from ~ 6.8 K to below 3.0 K as the oxygen increases. On the other hand, films grown using oxygen mixtures richer than 2 % are mostly amorphous. The electrical transport shows a semiconductor-like behavior with variable-range hopping conduction at low temperatures. The analysis of the optical properties reveals that the samples have not a defined semiconductor band gap, which can be related to the high structural disorder and the excitation of electrons in a wide range of energies
△ Less
Submitted 20 June, 2019; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Resolving the temporal evolution of line broadening in quantum emitters
Authors:
Christian Schimpf,
Marcus Reindl,
Petr Klenovský,
Thomas Fromherz,
Saimon F. Covre Da Silva,
Julian Hofer,
Christian Schneider,
Sven Höfling,
Rinaldo Trotta,
Armando Rastelli
Abstract:
Light emission from solid-state quantum emitters is inherently prone to environmental decoherence, which results in an inhomogeneous line broadening and in the deterioration of photon indistinguishability. Here we employ photon correlation Fourier spectroscopy (PCFS) to study the temporal evolution of such a broadening for the biexciton and exciton emission in resonantly driven GaAs quantum dots.…
▽ More
Light emission from solid-state quantum emitters is inherently prone to environmental decoherence, which results in an inhomogeneous line broadening and in the deterioration of photon indistinguishability. Here we employ photon correlation Fourier spectroscopy (PCFS) to study the temporal evolution of such a broadening for the biexciton and exciton emission in resonantly driven GaAs quantum dots. Differently from previous experiments, the time scales we probe range from a few nanoseconds to milliseconds and, simultaneously, the spectral resolution we achieve can be as small as 2 $μ$eV. We find pronounced differences in the temporal evolution of the two lines, which we attribute to differences in their homogeneous linewidth and sensitivity to charge noise. We then analyze the effect of irradiation with additional white light, which reduces blinking at the cost of enhanced charge noise. Due to its robustness against experimental imperfections and its high temporal resolution and bandwidth, PCFS outperforms established spectroscopy techniques, such as Michelson interferometry. We discuss its practical implementation, its limitations, and the possibility to use it to estimate the indistinguishability of consecutively emitted single photons for applications in quantum communication and photonic-based quantum information processing.
△ Less
Submitted 1 October, 2019; v1 submitted 29 March, 2019;
originally announced March 2019.
-
Superconductivity in nanocrystalline tungsten thin films growth by sputtering in a nitrogen-argon mixture
Authors:
J. A. Hofer,
Nestor Haberkorn
Abstract:
We report on the structural and superconducting properties of nanocrystalline tungsten thin films growth by sputtering at room temperature with an N2:Ar mixture (N2 from 3% to 50%). The crystalline phases were identified by comparing pristine and thermal annealed thin films. For N2/(Ar+N2) mixtures between 3 and 10 %, the films display nanocrystalline beta-W phase. Coexistence of beta-W and W2N ph…
▽ More
We report on the structural and superconducting properties of nanocrystalline tungsten thin films growth by sputtering at room temperature with an N2:Ar mixture (N2 from 3% to 50%). The crystalline phases were identified by comparing pristine and thermal annealed thin films. For N2/(Ar+N2) mixtures between 3 and 10 %, the films display nanocrystalline beta-W phase. Coexistence of beta-W and W2N phases are observed for gas mixtures with N2 between 20 % and 40%. A detailed study of the superconducting properties as function of the thickness was performed for W films growth with 8 % N2 mixtures. For this concentration, the nitrogen atoms increase the disorder at the nanoscale reducing the grain size and avoiding the crystallization of alpha-W. The superconducting critical temperature (Tc = 4.7 K) is thickness independent for films thicker than ~ 17 nm. Below this thickness, the Tc value decreases systematically being 3.1 K for 4 nm thick films. Our study provides a simple method for the fabrication of nanocrystalline beta-W thin films with potential applications in superconducting devices.
△ Less
Submitted 9 May, 2019; v1 submitted 5 February, 2019;
originally announced February 2019.
-
Analytic solutions to the Maxwell-London equations and levitation force for a superconducting sphere in a quadrupole field
Authors:
Joachim Hofer,
Markus Aspelmeyer
Abstract:
Recent proposals suggest using magnetically trapped superconducting spheres in the Meissner state to create low-loss mechanical oscillators with long coherence times. In these proposals the derivation of the force on the superconducting sphere and the coupling to the sphere typically relies on a vanishing penetration depth $λ$ as well as a specific symmetry (i.e. restricting the position of the sp…
▽ More
Recent proposals suggest using magnetically trapped superconducting spheres in the Meissner state to create low-loss mechanical oscillators with long coherence times. In these proposals the derivation of the force on the superconducting sphere and the coupling to the sphere typically relies on a vanishing penetration depth $λ$ as well as a specific symmetry (i.e. restricting the position of the sphere to one axis) or heuristic methods (e.g. assigning an equivalent point magnetic dipole moment to the sphere). In this paper we analytically solve the Maxwell-London equations with appropriate boundary conditions for a superconducting sphere in a quadrupole field. The analytic solutions provide the full field distribution for arbitrary $λ$ and for an arbitrary sphere position as well as the distribution of shielding currents within the sphere. We furthermore calculate the force acting on the sphere and the maximum field over the volume of the sphere. We show that for a certain range of $λ$ the maximum field experienced by the superconducting sphere is actually lower than it is for a non-magnetic sphere.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Cooling-by-measurement and mechanical state tomography via pulsed optomechanics
Authors:
M. R. Vanner,
J. Hofer,
G. D. Cole,
M. Aspelmeyer
Abstract:
Observing a physical quantity without disturbing it is a key capability for the control of individual quantum systems. Such back-action-evading or quantum-non-demolition measurements were first introduced in the 1970s in the context of gravitational wave detection to measure weak forces on test masses by high precision monitoring of their motion. Now, such techniques have become an indispensable t…
▽ More
Observing a physical quantity without disturbing it is a key capability for the control of individual quantum systems. Such back-action-evading or quantum-non-demolition measurements were first introduced in the 1970s in the context of gravitational wave detection to measure weak forces on test masses by high precision monitoring of their motion. Now, such techniques have become an indispensable tool in quantum science for preparing, manipulating, and detecting quantum states of light, atoms, and other quantum systems. Here we experimentally perform rapid optical quantum-noise-limited measurements of the position of a mechanical oscillator by using pulses of light with a duration much shorter than a period of mechanical motion. Using this back-action evading interaction we performed both state preparation and full state tomography of the mechanical motional state. We have reconstructed mechanical states with a position uncertainty reduced to 19 pm, limited by the quantum fluctuations of the optical pulse, and we have performed `cooling-by-measurement' to reduce the mechanical mode temperature from an initial 1100 K to 16 K. Future improvements to this technique may allow for quantum squeezing of mechanical motion, even from room temperature, and reconstruction of non-classical states exhibiting negative regions in their phase-space quasi-probability distribution.
△ Less
Submitted 15 May, 2013; v1 submitted 29 November, 2012;
originally announced November 2012.
-
Mid-Infrared Optical Frequency Combs based on Crystalline Microresonators
Authors:
C. Y. Wang,
T. Herr,
P. Del'Haye,
A. Schliesser,
J. Hofer,
R. Holzwarth,
T. W. Hänsch,
N. Picqué,
T. J. Kippenberg
Abstract:
The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but a…
▽ More
The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but are still facing technological challenges, like achieving high power per comb line and tens of GHz line spacing as required for e.g. direct comb spectroscopy. Here we demonstrate a novel approach to create such a frequency comb via four-wave mixing in a continuous-wave pumped ultra-high Q crystalline microresonator made of magnesium fluoride. Careful choice of the resonator material and design made it possible to generate a broad comb of narrow lines in the mid-infrared: a vast cascade of about 100 lines spaced by 100 GHz spanning 200 nm (~10 THz) at λ=2.5 μm. With its distinguishing features of compactness, efficient conversion, large mode spacing and high power per comb line, this novel frequency comb source holds promise for new approaches to molecular spectroscopy even deeper in the mid-infrared.
△ Less
Submitted 12 March, 2012; v1 submitted 13 September, 2011;
originally announced September 2011.
-
Thermal-noise limited laser stabilization to a crystalline whispering-gallery-mode resonator
Authors:
J. Alnis,
A. Schliesser,
C. Y. Wang,
J. Hofer,
T. J. Kippenberg,
T. W. Hänsch
Abstract:
We have stabilized an external cavity diode laser to a whispering gallery mode resonator formed by a protrusion of a single-crystal magnesiumdifluoride cylinder. The cylinder's compact dimensions (<1 cm^3) reduce the sensitivity to vibrations and simplify the stabilization of its temperature in a compact setup. In a comparison to an ultrastable laser used for precision metrology we determine a min…
▽ More
We have stabilized an external cavity diode laser to a whispering gallery mode resonator formed by a protrusion of a single-crystal magnesiumdifluoride cylinder. The cylinder's compact dimensions (<1 cm^3) reduce the sensitivity to vibrations and simplify the stabilization of its temperature in a compact setup. In a comparison to an ultrastable laser used for precision metrology we determine a minimum Allan deviation of 20 Hz, corresponding to a relative Allan deviation of 6*10^-14, at an integration time of 100 ms. This level of instability is compatible with the limits imposed by fundamental fluctuations of the material's refractive index at room temperature.
△ Less
Submitted 21 February, 2011;
originally announced February 2011.
-
Cavity optomechanics with ultra-high Q crystalline micro-resonators
Authors:
J. Hofer,
A. Schliesser,
T. J. Kippenberg
Abstract:
We present the first observation of optomechanical coupling in ultra-high Q crystalline whispering-gallery-mode (WGM) resonators. The high purity of the crystalline material enables optical quality factors in excess of 10^{10} and finesse exceeding 10^{6}. Simultaneously, mechanical quality factors greater than 10^{5} are obtained, still limited by clamping losses. Compared to previously demonstra…
▽ More
We present the first observation of optomechanical coupling in ultra-high Q crystalline whispering-gallery-mode (WGM) resonators. The high purity of the crystalline material enables optical quality factors in excess of 10^{10} and finesse exceeding 10^{6}. Simultaneously, mechanical quality factors greater than 10^{5} are obtained, still limited by clamping losses. Compared to previously demonstrated cylindrical resonators, the effective mass of the mechanical modes can be dramatically reduced by the fabrication of CaF2 microdisc resonators. Optical displacement monitoring at the 10^{-18} m/sqrt{Hz}-level reveals mechanical radial modes at frequencies up to 20 MHz, corresponding to unprecedented sideband factors (>100). Together with the weak intrinsic mechanical damping in crystalline materials, such high sindeband factors render crystalline WGM micro-resonators promising for backaction evading measurements, resolved sideband cooling or optomechanical normal mode splitting. Moreover, these resonators can operate in a regime where optomechanical Brillouin lasing can become accessible.
△ Less
Submitted 23 March, 2010; v1 submitted 6 November, 2009;
originally announced November 2009.
-
Oxygen isotope effect on the in-plane penetration depth in underdoped La_{2-x}Sr_{x}CuO_{4} single crystals
Authors:
J. Hofer,
K. Conder,
T. Sasagawa,
Guo-meng Zhao,
M. Willemin,
H. Keller,
K. Kishio
Abstract:
We report measurements of the oxygen isotope effect (OIE) on the in-plane penetration depth λ_{ab}(0) in underdoped La_{2-x}Sr_{x}CuO_{4} single crystals. A highly sensitive magnetic torque sensor with a resolution of Δτ~ 10^{-12} Nm was used for the magnetic measurements on microcrystals with a mass of ~ 10 microg. The OIE on λ_{ab}^{-2}(0) is found to be -10(2)% for x = 0.080 and -8(1)% for x…
▽ More
We report measurements of the oxygen isotope effect (OIE) on the in-plane penetration depth λ_{ab}(0) in underdoped La_{2-x}Sr_{x}CuO_{4} single crystals. A highly sensitive magnetic torque sensor with a resolution of Δτ~ 10^{-12} Nm was used for the magnetic measurements on microcrystals with a mass of ~ 10 microg. The OIE on λ_{ab}^{-2}(0) is found to be -10(2)% for x = 0.080 and -8(1)% for x = 0.086. It arises mainly from the oxygen mass dependence of the in-plane effective mass m_{ab}*. The present results suggest that lattice vibrations are important for the occurrence of high temperature superconductivity.
△ Less
Submitted 31 December, 1999;
originally announced December 1999.
-
Torque magnetometry on single-crystal high temperature superconductors near the critical temperature: a scaling approach
Authors:
J. Hofer,
T. Schneider,
J. M. Singer,
M. Willemin,
H. Keller,
T. Sasagawa,
K. Kishio,
K. Conder,
J. Karpinski
Abstract:
Angular-dependent magnetic torque measurements performed near the critical temperature on single crystals of HgBa_{2}CuO_{4+y}, La_{2-x}Sr{x}CuO_{4}, and YBa_{2}Cu_{3}O_{6.93} are scaled, following the 3D XY model, in order to determine the scaling function dG^{\pm}(z)/dz which describes the universal critical properties near T_{c}. A systematic shift of the scaling function with increasing effe…
▽ More
Angular-dependent magnetic torque measurements performed near the critical temperature on single crystals of HgBa_{2}CuO_{4+y}, La_{2-x}Sr{x}CuO_{4}, and YBa_{2}Cu_{3}O_{6.93} are scaled, following the 3D XY model, in order to determine the scaling function dG^{\pm}(z)/dz which describes the universal critical properties near T_{c}. A systematic shift of the scaling function with increasing effective mass anisotropy γ= (m_{ab}*/m_{c}*)^{1/2} is observed, which may be understood in terms of a 3D-2D crossover. Further evidence for a 3D-2D crossover is found from temperature-dependent torque measurements carried out in different magnetic fields at different field orientations δ, which show a quasi 2D "crossing region'' (M*,T*). The occurrence of this "crossing phenomenon'' is explained in a phenomenological way from the weak z dependence of the scaling function around a value z = z*. The "crossing'' temperature T* is found to be angular-dependent. Torque measurements above T_{c} reveal that fluctuations are strongly enhanced in the underdoped regime where the anisotropy is large, whereas they are less important in the overdoped regime.
△ Less
Submitted 3 December, 1999;
originally announced December 1999.
