-
Predicting air flow in calendered paper sheets from $μ$-CT data: combining physics with morphology
Authors:
Phillip Gräfensteiner,
Andoni Rodriguez,
Peter Leitl,
Ekaterina Baikova,
Maximilian Fuchs,
Eduardo Machado Charry,
Ulrich Hirn,
André Hilger,
Ingo Manke,
Robert Schennach,
Matthias Neumann,
Volker Schmidt,
Karin Zojer
Abstract:
Predicting the macroscopic properties of thin fiber-based porous materials from their microscopic morphology remains challenging because of the structural heterogeneity of these materials. In this study, computational fluid dynamics simulations were performed to compute volume air flow based on tomographic image data of uncompressed and compressed paper sheets. To reduce computational demands, a p…
▽ More
Predicting the macroscopic properties of thin fiber-based porous materials from their microscopic morphology remains challenging because of the structural heterogeneity of these materials. In this study, computational fluid dynamics simulations were performed to compute volume air flow based on tomographic image data of uncompressed and compressed paper sheets. To reduce computational demands, a pore network model was employed, allowing volume air flow to be approximated with less computational effort. To improve prediction accuracy, geometric descriptors of the pore space, such as porosity, surface area, median pore radius, and geodesic tortuosity, were combined with predictions of the pore network model. This integrated approach significantly improves the predictive power of the pore network model and indicates which aspects of the pore space morphology are not accurately represented within the pore network model. In particular, we illustrate that a high correlation among descriptors does not necessarily imply redundancy in a combined prediction.
△ Less
Submitted 12 June, 2025;
originally announced June 2025.
-
The potential of Brillouin Spectroscopy for investigating the mechanical properties of hydrogels during dehydration
Authors:
Caterina Czibula,
Mónica G. Simoes,
Manfred H. Ulz,
Bruno B. Ravanello,
Kareem Elsayad,
Ulrich Hirn,
Kristie J. Koski
Abstract:
Hydrogels are attractive and versatile gel-based structures consisting of three-dimensional networks of hydrophilic polymers with unique properties that can retain a large amount of water and be tailor-designed according to specific requirements, and thus, suitable for numerous commercial areas (i.e., medicine, agriculture, electronics, cosmetics, etc.). However, since these materials can be very…
▽ More
Hydrogels are attractive and versatile gel-based structures consisting of three-dimensional networks of hydrophilic polymers with unique properties that can retain a large amount of water and be tailor-designed according to specific requirements, and thus, suitable for numerous commercial areas (i.e., medicine, agriculture, electronics, cosmetics, etc.). However, since these materials can be very soft and flexible, mechanical characterization is challenging. This study explores the mechanical properties of a cellulose-based hydrogel using the optical, non-contact technique Brillouin light scattering spectroscopy (BLS). Two differently dried hydrogel samples were investigated and pre-characterized for their morphology by scanning electron microscopy (SEM) and their mechanical performance by tensile testing. Then, BLS spectra were recorded to characterize the material's stiffness, indicating that the structural arrangement of the material due to the drying procedure (the density) is the main factor limiting the material's strength. By further analyzing the effect of moisture and the changes during drying, we characterize the mechanical behavior of organic hydrogel films and sponges and their dehydration evolution to understand the liquid-solid transition.
△ Less
Submitted 10 October, 2024;
originally announced October 2024.
-
The elastic stiffness tensor of cellulosic viscose fibers measured with Brillouin spectroscopy
Authors:
Caterina Czibula,
Manfred H. Ulz,
Alexander Wagner,
Kareem Elsayad,
Ulrich Hirn,
Kristie J. Koski
Abstract:
Brillouin light scattering spectroscopy (BLS) is applied to study the micromechanics of cellulosic viscose fibers, one of the commercially most important, man-made biobased fibers. Using an equal angle scattering geometry, we provide a thorough description of the procedure to determine the complete transversely isotropic elastic stiffness tensor. From the stiffness tensor the engineering-relevant…
▽ More
Brillouin light scattering spectroscopy (BLS) is applied to study the micromechanics of cellulosic viscose fibers, one of the commercially most important, man-made biobased fibers. Using an equal angle scattering geometry, we provide a thorough description of the procedure to determine the complete transversely isotropic elastic stiffness tensor. From the stiffness tensor the engineering-relevant material parameters such as Young's moduli, shear moduli, and Poisson's ratios in radial and axial fiber direction are evaluated. The investigated fiber type shows that, at ideal conditions, the material exhibits optical waveguide properties resulting in spontaneous Brillouin backscattering which can be used to obtain additional information from the Brillouin spectra, enabling the measurement of two different scattering processes and directions with only one scattering geometry.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
A pair of FRET dyes designed to measure nano-scale contact and the associated adhesion force
Authors:
Mónica Gaspar Simões,
Robert Schennach,
Ulrich Hirn
Abstract:
Interfacial adhesion is caused by intermolecular forces that only occur between surfaces at nano-scale contact (NSC) i.e., 0.1-0.4nm. To evaluate NSC and its influence on adhesion, Förster resonance energy transfer (FRET) spectroscopy has been used. FRET is a technique capable to measure nanometric distances between surfaces by taking advantage of the interaction amid some specific fluorescence mo…
▽ More
Interfacial adhesion is caused by intermolecular forces that only occur between surfaces at nano-scale contact (NSC) i.e., 0.1-0.4nm. To evaluate NSC and its influence on adhesion, Förster resonance energy transfer (FRET) spectroscopy has been used. FRET is a technique capable to measure nanometric distances between surfaces by taking advantage of the interaction amid some specific fluorescence molecules, named donor and acceptor. The Förster radius (R0) of the FRET pair indicates the distance detection range (0.5R0-2R0) of the system and, must be selected considering the final purpose of each study. Here, we propose a new FRET pair: 7-Amino-4-methyl-cumarin (C120) and 5(6)-Carboxy-2',7'-dichlor-fluorescein (CDCF) with high quantum yield (QY, QYC120=0.91 and QYCDCF=0.64) and a distance range of 0.6-2.2nm (0.1 mM) specifically developed to measure NSC between soft surfaces. For this, polymeric thin films were bonded using different loads, from 1.5 to 150 bar, to create different degrees of NSC, analyzed by FRET spectroscopy, and later pulled apart to measure their interfacial separation energy (adhesion force). Our experiments showed that NSC increases with the applied pressure in the bonded thin films, leading to higher FRET intensity and adhesion force/separation energy. Thus, we have validated a new FRET pair, suitable to measure the degree of NSC between surfaces and establish a linear relationship between FRET and adhesion force; which can be of interest for any type of study with soft materials interfaces that include NSC and its influence on adhesion, as sealants, adhesives or sensors.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
The influence of structural variations on the constitutive response and strain variations in thin fibrous materials
Authors:
Mossab Alzweighi,
Rami Mansour,
Jussi Lahti,
Ulrich Hirn,
Artem Kulachenko
Abstract:
The stochastic variations in the structural properties of thin fiber networks govern to a great extent their mechanical performance. To assess the influence of local structural variability on the local strain and mechanical response of the network, we propose a multiscale approach combining modeling, numerical simulation and experimental measurements. Based on micro-mechanical fiber network simula…
▽ More
The stochastic variations in the structural properties of thin fiber networks govern to a great extent their mechanical performance. To assess the influence of local structural variability on the local strain and mechanical response of the network, we propose a multiscale approach combining modeling, numerical simulation and experimental measurements. Based on micro-mechanical fiber network simulations, a continuum model describing the response at the mesoscale level is first developed. Experimentally measured spatial fields of thickness, density, fiber orientation and anisotropy are thereafter used as input to a macroscale finite-element model. The latter is used to simulate the impact of spatial variability of each of the studied structural properties. In addition, this work brings novelty by including the influence of the drying condition during the production process on the fiber properties. The proposed approach is experimentally validated by comparison to measured strain fields and uniaxial responses. The results suggest that the spatial variability in density presents the highest impact on the local strain field followed by thickness and fiber orientation. Meanwhile, for the mechanical response, the fiber orientation angle with respect to the drying restraints is the key influencer and its contribution to the anisotropy of the mechanical properties is greater than the contribution of the fiber anisotropy developed during the fiber sheet-making.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Estimation of the in-situ elastic constants of wood pulp fibers in freely dried paper via AFM experiments
Authors:
Caterina Czibula,
August Brandberg,
Megan J. Cordill,
Aleksandar Matković,
Oleksandr Glushko,
Chiara Czibula,
Artem Kulachenko,
Christian Teichert,
Ulrich Hirn
Abstract:
Atomic force microscopy-based nanoindentation (AFM-NI) enables characterization of the basic mechanical properties of wood pulp fibers in conditions representative of the state inside a paper sheet. Determination of the mechanical properties under different loads is critical for the success of increasingly advanced computational models to understand, predict and improve the behavior of paper and p…
▽ More
Atomic force microscopy-based nanoindentation (AFM-NI) enables characterization of the basic mechanical properties of wood pulp fibers in conditions representative of the state inside a paper sheet. Determination of the mechanical properties under different loads is critical for the success of increasingly advanced computational models to understand, predict and improve the behavior of paper and paperboard. Here, AFM-NI was used to indent fibers transverse to and along the longitudinal axis of the fiber. Indentation moduli and hardness were obtained for relative humidity from 25 % to 75 %. The hardness and the indentation modulus exhibit moisture dependency, decreasing by 75 % and 50 %, respectively, over the range tested. The determined indentation moduli were combined with previous work to estimate the longitudinal and transverse elastic modulus of the fiber wall. Due to the relatively low indentation moduli, the elastic constants are also low compared to values obtained via single fiber testing.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
AFM-based low frequency viscoelastic characterization of wood pulp fibers at different relative humidity
Authors:
Caterina Czibula,
Tristan Seidlhofer,
Christian Ganser,
Ulrich Hirn,
Christian Teichert
Abstract:
The viscoelastic behavior of wood pulp fibers plays a fundamental role in the performance of paper and paper products. Wood pulp fibers are hierarchical composites consisting of different cell wall layers and have anisotropic properties. Since accessing the individual fibers is challenging, no measurement technique has been able to characterize the viscoelastic properties in the longitudinal and t…
▽ More
The viscoelastic behavior of wood pulp fibers plays a fundamental role in the performance of paper and paper products. Wood pulp fibers are hierarchical composites consisting of different cell wall layers and have anisotropic properties. Since accessing the individual fibers is challenging, no measurement technique has been able to characterize the viscoelastic properties in the longitudinal and transverse fiber direction yet. Here, an atomic force microscopy-based method is applied to investigate the viscoelastic properties of wood pulp fibers at varying relative humidity in both fiber direction. Experimental creep tests have been performed to investigate the material's low frequency regime response. A spring-dashpot model has been applied to characterize the viscoelastic behavior. The results indicate surprisingly small differences of the properties between both fiber directions. Transferring the results into a spectral representation explains an opposing trend of the viscosity that is connected to the long-term behavior.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
