-
Resolving discrepancies in bang-time predictions for indirect-drive ICF experiments on the NIF: Insights from the Build-A-Hohlraum campaign
Authors:
G. F. Swadling,
W. A. Farmer,
H. Chen,
N. Aybar,
M. S. Rubery,
M. B. Schneider,
D. A. Liedahl,
N. C. Lemos,
E. Tubman,
J. S. Ross,
D. E. Hinkel,
O. L. Landen,
M. D. Rosen,
S. Rogers K. Newman,
D. Yanagisawa,
N. Roskopf,
S. Vonhof,
L. Aghaian,
M. Mauldin,
B. L. Reichelt,
J. Kunimune
Abstract:
This study investigated discrepancies between measured and simulated x-ray drive in Inertial Confinement Fusion (ICF) hohlraums at the National Ignition Facility (NIF). Despite advances in radiation-hydrodynamic simulations, a consistent "drive deficit" remains. Experimentally measured ICF capsule bang-times are systematically 400-700 ps later than simulations predict. The Build-A-Hohlraum (BAH) c…
▽ More
This study investigated discrepancies between measured and simulated x-ray drive in Inertial Confinement Fusion (ICF) hohlraums at the National Ignition Facility (NIF). Despite advances in radiation-hydrodynamic simulations, a consistent "drive deficit" remains. Experimentally measured ICF capsule bang-times are systematically 400-700 ps later than simulations predict. The Build-A-Hohlraum (BAH) campaign explored potential causes for this discrepancy by systematically varying hohlraum features, including laser entrance hole (LEH) windows, capsules, and gas fills. Overall, the agreement between simulated and experimental x-ray drive was found to be largely unaffected by these changes. The data allows us to exclude some hypotheses put forward to potentially explain the discrepancy. Errors in the local thermodynamic equilibrium (LTE) atomic modeling, errors in the modeling of LEH closure and errors due to a lack of plasma species mix physics in simulations are shown to be inconsistent with our measurements. Instead, the data supports the hypothesis that errors in NLTE emission modeling are a significant contributor to the discrepancy. X-ray emission in the 2 - 4 keV range is found to be approximately 30% lower than in simulations. This is accompanied by higher than predicted electron temperatures in the gold bubble region, pointing to errors in non-LTE modeling. Introducing an opacity multiplier of 0.87 on energy groups above 1.8 keV improves agreement with experimental data, reducing the bang-time discrepancy from 300 ps to 100 ps. These results underscore the need for refined NLTE opacity models to enhance the predictive power of hohlraum simulations.
△ Less
Submitted 13 June, 2025; v1 submitted 17 January, 2025;
originally announced January 2025.
-
First bromine doped cryogenic implosion at the National Ignition Facility
Authors:
A. C. Hayes,
G. Kyrala,
M. Gooden,
J. B. Wilhelmy,
L. Kot,
P. Volegov,
C. Wilde,
B. Haines,
Gerard Jungman,
R. S. Rundberg,
D. C. Wilson,
C. Velsko,
W. Cassata,
E. Henry,
C. Yeamans,
C. Cerjan,
T. Ma,
T. Doppner,
A. Nikroo,
O. Hurricane,
D. Callahan,
D. Hinkel,
D. Schneider,
B. Bachmann,
F. Graziani
, et al. (7 additional authors not shown)
Abstract:
We report on the first experiment dedicated to the study of nuclear reactions on dopants in a cryogenic capsule at the National Ignition Facility (NIF). This was accomplished using bromine doping in the inner layers of the CH ablator of a capsule identical to that used in the NIF shot N140520. The capsule was doped with 3$\times$10$^{16}$ bromine atoms. The doped capsule shot, N170730, resulted in…
▽ More
We report on the first experiment dedicated to the study of nuclear reactions on dopants in a cryogenic capsule at the National Ignition Facility (NIF). This was accomplished using bromine doping in the inner layers of the CH ablator of a capsule identical to that used in the NIF shot N140520. The capsule was doped with 3$\times$10$^{16}$ bromine atoms. The doped capsule shot, N170730, resulted in a DT yield that was 2.6 times lower than the undoped equivalent. The Radiochemical Analysis of Gaseous Samples (RAGS) system was used to collect and detect $^{79}$Kr atoms resulting from energetic deuteron and proton ion reactions on $^{79}$Br. RAGS was also used to detect $^{13}$N produced dominantly by knock-on deuteron reactions on the $^{12}$C in the ablator. High-energy reaction-in-flight neutrons were detected via the $^{209}$Bi(n,4n)$^{206}$Bi reaction, using bismuth activation foils located 50 cm outside of the target capsule. The robustness of the RAGS signals suggest that the use of nuclear reactions on dopants as diagnostics is quite feasible.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
Experiments conducted in the burning plasma regime with inertial fusion implosions
Authors:
J. S. Ross,
J. E. Ralph,
A. B. Zylstra,
A. L. Kritcher,
H. F. Robey,
C. V. Young,
O. A. Hurricane,
D. A. Callahan,
K. L. Baker,
D. T. Casey,
T. Doeppner,
L. Divol,
M. Hohenberger,
S. Le Pape,
A. Pak,
P. K. Patel,
R. Tommasini,
S. J. Ali,
P. A. Amendt,
L. J. Atherton,
B. Bachmann,
D. Bailey,
L. R. Benedetti,
L. Berzak Hopkins,
R. Betti
, et al. (127 additional authors not shown)
Abstract:
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into…
▽ More
An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Experimental detection of surface spin-polarized electron accumulation in topological insulators using scanning tunneling microscopy
Authors:
S. Tyagi,
M. Dreyer,
D. Bowen,
D. Hinkel,
P. J. Taylor,
A. L. Friedman,
R. E. Butera,
C. Krafft,
I. Mayergoyz
Abstract:
Spin-momentum locking in the surface mode of topological insulators (TI) leads to the surface accumulation of spin-polarized electrons caused by bias current flows through TI samples. Here, we demonstrate that scanning tunneling microscopy can be used to sense this surface spin-polarized electron accumulation. We present experimental results of this sensing for Sn-doped Bi$_2$Se$_3$ samples by emp…
▽ More
Spin-momentum locking in the surface mode of topological insulators (TI) leads to the surface accumulation of spin-polarized electrons caused by bias current flows through TI samples. Here, we demonstrate that scanning tunneling microscopy can be used to sense this surface spin-polarized electron accumulation. We present experimental results of this sensing for Sn-doped Bi$_2$Se$_3$ samples by employing Fe-coated W tips as well as non-magnetic W tips. We observe a linear increase in the spin-accumulation as a function of bias current through TI samples.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Study Of Surface Spin-Polarized Electron Accumulation In Topological Insulators Using Scanning Tunneling Microscopy
Authors:
S. Tyagi,
M. Dreyer,
D. Bowen,
D. Hinkel,
P. J. Taylor,
A. L. Friedman,
R. E. Butera,
C. Krafft,
I. Mayergoyz
Abstract:
The results of scanning tunneling microscopy experiments using iron-coated tungsten tips and current-carrying bismuth selenide ($Bi_2Se_3$) samples are reported. Asymmetry in tunneling currents with respect to the change in the direction of bias currents through $Bi_2Se_3$ samples has been observed. It is argued that this asymmetry is the manifestation of surface spin-polarized electron accumulati…
▽ More
The results of scanning tunneling microscopy experiments using iron-coated tungsten tips and current-carrying bismuth selenide ($Bi_2Se_3$) samples are reported. Asymmetry in tunneling currents with respect to the change in the direction of bias currents through $Bi_2Se_3$ samples has been observed. It is argued that this asymmetry is the manifestation of surface spin-polarized electron accumulation caused by the ninety-degree electron spin-momentum locking in the topologically protected surface current mode. It is demonstrated that the manifestation of surface spin-polarized electron accumulation is enhanced by tin doping of $Bi_2Se_3$ samples. Furthermore, the appearance of spin-dependent density of states in current carrying $Bi_2Se_3$ samples has also been observed.
△ Less
Submitted 31 October, 2019;
originally announced November 2019.
-
On local sensing of spin Hall effect in tungsten films by using STM-based measurements
Authors:
Ting Xie,
Michael Dreyer,
David Bowen,
Dan Hinkel,
R. E. Butera,
Charles Krafft,
Isaak Mayergoyz
Abstract:
The spin Hall effect in tungsten films has been experimentally studied by using STM-based measurements. These measurements have been performed by using tungsten and iron coated tungsten tips. In the case of tungsten tips, it has been observed that the current flow through the tungsten film results in an appreciable asymmetry in the tunneling current with respect to the change in the polarity of th…
▽ More
The spin Hall effect in tungsten films has been experimentally studied by using STM-based measurements. These measurements have been performed by using tungsten and iron coated tungsten tips. In the case of tungsten tips, it has been observed that the current flow through the tungsten film results in an appreciable asymmetry in the tunneling current with respect to the change in the polarity of the tunneling voltage. It is reasoned that the cause of this asymmetry is the accumulation of spin polarized electrons on the tungsten film surface due to the spin Hall effect. This asymmetry is not affected by the change of the direction of the bias current through the film. However, in the case of iron coated tungsten tips, it has been observed that a change in the direction of the bias current does lead to an additional asymmetry in the tunneling current. It is thus experimentally demonstrated that this asymmetry is caused by the SHE and spin-dependent density of states of iron-coated tips.
△ Less
Submitted 10 October, 2017; v1 submitted 19 July, 2017;
originally announced July 2017.
-
A scanning tunneling microscopy based potentiometry technique and its application to the local sensing of the spin Hall effect
Authors:
Ting Xie,
Michael Dreyer,
David Bowen,
Dan Hinkel,
R. E. Butera,
Charles Krafft,
Isaak Mayergoyz
Abstract:
A scanning tunneling microscopy based potentiometry technique for the measurements of the local surface electric potential is presented and illustrated by experiments performed on current-carrying thin tungsten films. The obtained results demonstrate a sub-millivolt resolution in the measured surface potential. The application of this potentiometry technique to the local sensing of the spin Hall e…
▽ More
A scanning tunneling microscopy based potentiometry technique for the measurements of the local surface electric potential is presented and illustrated by experiments performed on current-carrying thin tungsten films. The obtained results demonstrate a sub-millivolt resolution in the measured surface potential. The application of this potentiometry technique to the local sensing of the spin Hall effect is outlined and some experimental results are reported.
△ Less
Submitted 23 June, 2017;
originally announced June 2017.
-
The first cryogenic DT layered, beryllium capsule implosion at the National Ignition Facility
Authors:
D. C. Wilson,
J. L. Kline,
S. A. Yi,
A. N. Simakov,
G. A. Kyrala,
R. E. Olson,
T. S. Perry,
F. E. Merrill,
S. Batha,
A. B. Zylstra,
D. A. Callahan,
W. Cassata,
E. L. Dewald,
S. W. Haan,
D. E. Hinkel,
O. A. Hurricane,
N. Izumi,
T. Ma,
A. G. MacPhee,
J. L. Milovich,
J. E. Ralph,
J. R. Rygg,
M. B. Schneider,
S. Sepke,
D. J. Strozzi
, et al. (4 additional authors not shown)
Abstract:
NIF experiments with Be capsules have followed a path of the highly successful "high-foot" CH capsules. Several keyhole and ConA targets preceeded a DT layered shot. In addition to backscatter subtraction, laser drive multipliers were needed to match observed X-ray drives. Those for the picket (0.95), trough (1.0) and second pulse (0.80) were determined by VISAR measurements. The time dependence o…
▽ More
NIF experiments with Be capsules have followed a path of the highly successful "high-foot" CH capsules. Several keyhole and ConA targets preceeded a DT layered shot. In addition to backscatter subtraction, laser drive multipliers were needed to match observed X-ray drives. Those for the picket (0.95), trough (1.0) and second pulse (0.80) were determined by VISAR measurements. The time dependence of the Dante total x-ray flux and its fraction > 1.8 keV reflect the time dependence of the multipliers. A two step drive multiplier for the main pulse can match implosion times, but Dante measurements suggest the drive multiplier must increase late in time. With a single set of time dependent, multi-level multipliers the Dante data are well matched. These same third pulse drive multipliers also match the implosion times and Dante signals for two CH capsule DT. One discrepancy in the calculations is the X-ray flux in the picket. Calculations over-estimate the flux > 1.8 keV by a factor of ~100, while getting the total flux correctly. These harder X-rays cause an expansion of the Be/fuel interface of 2-3 km/s before the arrival of the first shock. VISAR measurements show only 0.2 to 0.3 km/s. The X-ray drive on the DT Be capsule was further degraded by a random decrease of 9% in the total picket flux. This small change caused the capsule fuel to change from an adiabat of 1.8 to 2.3 by mistiming of the first and second shocks. With this shock tuning and adjustments to the calculation, the first NIF Be capsule implosion achieved 29% of calculated yield, comparable to the CH DT capsules of 68% and 21%. Inclusion of a large M1 asymmetry in the DT ice layer and mixing from instability growth may help explain this final degradation. In summary when driven similarly the Be capsules performed like CH capsules. Performance degradation for both seems to be dominated by drive and capsule asymmetries.
△ Less
Submitted 31 January, 2017;
originally announced January 2017.
-
Constructing Simultaneous Diophantine Approximations of Certain Cubic Numbers
Authors:
Dustin Hinkel
Abstract:
For $K$ a cubic field with only one real embedding and $α,β\in K$, we show how to construct an increasing sequence $\{m_n\}$ of positive integers and a subsequence $\{ψ_n\}$ such that (for some constructible constants $C_1,C_2>0$) $\max\{\|m_nα\|,\|m_nβ\|\}<\frac{C_1}{m_n^{1/2}}$ and $\|ψ_nα\|<\frac{C_2}{ψ_n^{1/2}\log ψ_n}$ for all $n$. As a consequence, we have…
▽ More
For $K$ a cubic field with only one real embedding and $α,β\in K$, we show how to construct an increasing sequence $\{m_n\}$ of positive integers and a subsequence $\{ψ_n\}$ such that (for some constructible constants $C_1,C_2>0$) $\max\{\|m_nα\|,\|m_nβ\|\}<\frac{C_1}{m_n^{1/2}}$ and $\|ψ_nα\|<\frac{C_2}{ψ_n^{1/2}\log ψ_n}$ for all $n$. As a consequence, we have $ψ_n\|ψ_nα\|\|ψ_nβ\|<\frac{C_1 C_2}{\log ψ_n}$, thus giving an effective proof of Littlewood's conjecture for the pair $(α,β)$. Our proofs are elementary and use only standard results from algebraic number theory and the theory of continued fractions.
△ Less
Submitted 12 December, 2014;
originally announced December 2014.
-
Threshold for Electron Trapping Nonlinearity in Langmuir Waves
Authors:
D. J. Strozzi,
E. A. Williams,
H. A. Rose,
D. E. Hinkel,
A. B. Langdon,
J. W. Banks
Abstract:
We assess when electron trapping nonlinearity is expected to be important in Langmuir waves. The basic criterion is that the inverse of the detrapping rate nu_d of electrons in the trapping region of velocity space must exceed the bounce period of deeply-trapped electrons, tau_B = (n_e/delta n)^{1/2} 2pi/omega_pe. A unitless figure of merit, the "bounce number" N_B = 1/(nu_d tau_B), encapsulates t…
▽ More
We assess when electron trapping nonlinearity is expected to be important in Langmuir waves. The basic criterion is that the inverse of the detrapping rate nu_d of electrons in the trapping region of velocity space must exceed the bounce period of deeply-trapped electrons, tau_B = (n_e/delta n)^{1/2} 2pi/omega_pe. A unitless figure of merit, the "bounce number" N_B = 1/(nu_d tau_B), encapsulates this condition and defines a trapping threshold amplitude for which N_B=1. The detrapping rate is found for convective loss (transverse and longitudinal) out of a spatially finite Langmuir wave. Simulations of driven waves with a finite transverse profile, using the 2D-2V Vlasov code Loki, show trapping nonlinearity increases continuously with N_B for transverse loss, and is significant for N_B ~ 1. The detrapping rate due to Coulomb collisions (both electron-electron and electron-ion) is also found, with pitch-angle scattering and parallel drag and diffusion treated in a unified manner. A simple way to combine convective and collisional detrapping is given. Application to underdense plasma conditions in inertial confinement fusion targets is presented. The results show that convective transverse loss is usually the most potent detrapping process in a single f/8 laser speckle. For typical plasma and laser conditions on the inner laser cones of the National Ignition Facility, local reflectivities ~3% are estimated to produce significant trapping effects.
△ Less
Submitted 18 November, 2012; v1 submitted 19 August, 2012;
originally announced August 2012.
-
Ray-based calculations of backscatter in laser fusion targets
Authors:
D. J. Strozzi,
E. A. Williams,
D. E. Hinkel,
D. H. Froula,
R. A. London,
D. A. Callahan
Abstract:
A 1D, steady-state model for Brillouin and Raman backscatter from an inhomogeneous plasma is presented. The daughter plasma waves are treated in the strong damping limit, and have amplitudes given by the (linear) kinetic response to the ponderomotive drive. Pump depletion, inverse-bremsstrahlung damping, bremsstrahlung emission, Thomson scattering off density fluctuations, and whole-beam focusin…
▽ More
A 1D, steady-state model for Brillouin and Raman backscatter from an inhomogeneous plasma is presented. The daughter plasma waves are treated in the strong damping limit, and have amplitudes given by the (linear) kinetic response to the ponderomotive drive. Pump depletion, inverse-bremsstrahlung damping, bremsstrahlung emission, Thomson scattering off density fluctuations, and whole-beam focusing are included. The numerical code DEPLETE, which implements this model, is described. The model is compared with traditional linear gain calculations, as well as "plane-wave" simulations with the paraxial propagation code pF3D. Comparisons with Brillouin-scattering experiments at the OMEGA Laser Facility [T. R. Boehly et al., Opt. Commun. 133, p. 495 (1997)] show that laser speckles greatly enhance the reflectivity over the DEPLETE results. An approximate upper bound on this enhancement, motivated by phase conjugation, is given by doubling the DEPLETE coupling coefficient. Analysis with DEPLETE of an ignition design for the National Ignition Facility (NIF) [J. A. Paisner, E. M. Campbell, and W. J. Hogan, Fusion Technol. 26, p. 755 (1994)], with a peak radiation temperature of 285 eV, shows encouragingly low reflectivity. Re-absorption of Raman light is seen to be significant in this design.
△ Less
Submitted 11 November, 2008; v1 submitted 31 May, 2008;
originally announced June 2008.
