-
Multiconfigurational short-range on-top pair-density functional theory
Authors:
Frederik Kamper Jørgensen,
Erik Rosendahl Kjellgren,
Hans Jørgen Aagaard Jensen,
Erik Donovan Hedegård
Abstract:
We present the theory and implementation of a fully variational wave function -- density functional theory (DFT) hybrid model, which is applicable to many cases of strong correlation. We denote this model the multiconfigurational self-consistent on-top pair-density functional theory model (MC-srPDFT). We have previously shown how the multi-configurational short-range DFT hybrid model (MC-srDFT) ca…
▽ More
We present the theory and implementation of a fully variational wave function -- density functional theory (DFT) hybrid model, which is applicable to many cases of strong correlation. We denote this model the multiconfigurational self-consistent on-top pair-density functional theory model (MC-srPDFT). We have previously shown how the multi-configurational short-range DFT hybrid model (MC-srDFT) can describe many multiconfigurational cases of any spin symmetry, and also state-specific calculations on excited states (Hedegård et al. J. Chem. Phys. 148, 2018, 214103). However, the srDFT part of the MC-srDFT has some deficiencies that it shares with Kohn-Sham DFT; in particular (1) self-interaction errors (albeit reduced because of the range separation), (2) that different M$_S$ states incorrectly become non-degenerate, and (3) that singlet and non-singlet states dissociating to the same open-shell fragments incorrectly lead to different electronic energies at dissociation. The model we present in this paper corrects these deficiencies by introducing the on-top pair density as an auxiliary variable replacing the spin density. Unlike other models in the literature, our model is fully variational and employs a long-range version of the on-top pair density. The implementation is a second-order optimization algorithm ensuring robust convergence to both ground- and excited states. We show how MC-srPDFT solves the mentioned challenges by sample calculations on the ground state singlet curve of H$_2$, N$_2$, and Cr$_2$ and the lowest triplet curves for N$_2$ and Cr$_2$. Furthermore, the rotational barrier for ethene is investigated for the S$_0$ and T$_1$ states. The calculations show correct degeneracy between the singlet and triplet curves at dissociation and the results are invariant to the choice of M$_S$ value for the triplet curves.
△ Less
Submitted 15 January, 2025; v1 submitted 8 September, 2024;
originally announced September 2024.
-
Perspective: Multi-configurational methods in bio-inorganic chemistry
Authors:
Frederik K. Jørgensen,
Mickaël G. Delcey,
Erik D. Hedegård
Abstract:
Transition metal ions play crucial roles in the structure and function of numerous proteins, contributing to essential biological processes such as catalysis, electron transfer, and oxygen binding. However, accurately modeling the electronic structure and properties of metalloproteins poses significant challenges due to the complex nature of their electronic configurations and strong correlation e…
▽ More
Transition metal ions play crucial roles in the structure and function of numerous proteins, contributing to essential biological processes such as catalysis, electron transfer, and oxygen binding. However, accurately modeling the electronic structure and properties of metalloproteins poses significant challenges due to the complex nature of their electronic configurations and strong correlation effects. Multiconfigurational quantum chemistry methods are, in principle, the most appropriate tools for addressing these challenges, offering the capability to capture the inherent multi-reference character and strong electron correlation present in bio-inorganic systems. Yet their computational cost has long hindered wider adoption, making methods such as Density Functional Theory (DFT) the method of choice. However, advancements over the past decade have substantially alleviated this limitation, rendering multiconfigurational quantum chemistry methods more accessible and applicable to a wider range of bio-inorganic systems. In this perspective, we discuss some of these developments and how they have already been used to answer some of the most important questions in bio-inorganic chemistry. We also comment on ongoing developments in the field and how the future of the field may evolve.
△ Less
Submitted 19 May, 2024;
originally announced May 2024.
-
Theoretical and numerical comparison of quantum- and classical embedding models for optical spectra
Authors:
Marina Jansen,
Peter Reinholdt,
Erik D. Hedegård,
Carolin König
Abstract:
Quantum-mechanical (QM) and classical embedding models approximate a supermolecular quantum chemical calculation. This is particularly useful when the supermolecular calculation has a size that is out of reach for present QM models. Although QM and classical embedding methods share the same goal, they approach this goal from different starting points. In this study, we compare the polarizable embe…
▽ More
Quantum-mechanical (QM) and classical embedding models approximate a supermolecular quantum chemical calculation. This is particularly useful when the supermolecular calculation has a size that is out of reach for present QM models. Although QM and classical embedding methods share the same goal, they approach this goal from different starting points. In this study, we compare the polarizable embedding (PE) and frozen-density embedding (FDE) models. The former is a classical embedding model, whereas the latter is a density-based QM embedding model. Our comparison focuses on solvent effects on optical spectra of solutes. This is a typical scenario where super-system calculations including the solvent environment become prohibitively large. We formulate a common theoretical framework for PE and FDE models and systematically investigate how PE and FDE approximate solvent effects. Generally, differences are found to be small, except in cases where electron spill-out becomes problematic in the classical frameworks. In these cases, however, atomic pseudopotentials can reduce the electron-spill-out issue.
△ Less
Submitted 23 April, 2023;
originally announced April 2023.
-
A method to capture the large relativistic and solvent effects on the UV-vis spectra of photo-activated metal complexes
Authors:
Joel Creutzberg,
Erik Donovan Hedegård
Abstract:
We have recently developed a method based on relativistic time-dependent density functional theory (TD-DFT) that allows the calculation of electronic spectra in solution (Creutzberg, Hedegård, J. Chem. Theory Comput.18, 2022, 3671). This method treats the solvent explicitly with a classical, polarizable embedding (PE) description. Furthermore, it employs the complex polarization propagator (CPP) f…
▽ More
We have recently developed a method based on relativistic time-dependent density functional theory (TD-DFT) that allows the calculation of electronic spectra in solution (Creutzberg, Hedegård, J. Chem. Theory Comput.18, 2022, 3671). This method treats the solvent explicitly with a classical, polarizable embedding (PE) description. Furthermore, it employs the complex polarization propagator (CPP) formalism which allows calculations on complexes with a dense population of electronic states (such complexes are known to be problematic for conventional TD-DFT). Here, we employ this method to investigate both the dynamic and electronic effects of the solvent for the excited electronic states of trans-trans-trans-[Pt(N3)2(OH)2(NH3)2] in aqueous solution. This complex decomposes into species harmful to cancer cells under light irradiation. Thus, understanding its photo-physical properties may lead to a more efficient method to battle cancer. We quantify the effect of the underlying structure and dynamics by classical molecular mechanics simulations, refined with a subsequent DFT or semi-empirical optimization on a cluster. Moreover, we quantify the effect of employing different methods to set up the solvated system, e.g., how sensitive the results are to the method used for the refinement, and how large a solvent shell that is required. The electronic solvent effect is always included through a PE potential.
△ Less
Submitted 2 April, 2023;
originally announced April 2023.
-
Polarizable embedding complex polarization propagator in four- and two-component frameworks
Authors:
Joel Creutzberg,
Erik D. Hedegård
Abstract:
Explicit embedding methods combined with the complex polarization propagator (CPP) enable modeling of spectroscopy for increasingly complex systems with a high density of states. We present the first derivation and implementation of the CPP in four- and exact two-component (X2C) polarizable embedding (PE) frameworks. We denote the developed methods PE-4c-CPP and PE-X2C-CPP, respectively. We illust…
▽ More
Explicit embedding methods combined with the complex polarization propagator (CPP) enable modeling of spectroscopy for increasingly complex systems with a high density of states. We present the first derivation and implementation of the CPP in four- and exact two-component (X2C) polarizable embedding (PE) frameworks. We denote the developed methods PE-4c-CPP and PE-X2C-CPP, respectively. We illustrate the methods by estimating the solvent effect on UV-vis and X-ray atomic absorption (XAS) spectra of [Rh(H2O)6]3+ and [Ir(H2O)6]3+ immersed in aqueous solution. We moreover estimate solvent effects on UV-vis spectra of a platinum complex that can be photo-chemically activated (in water) to kill cancer cells. Our results clearly show that inclusion of the environment is required: UV-vis and (to a lesser degree) XAS spectra can become qualitatively different from vacuum calculations. Comparison of PE-4c-CPP and PE-X2C-CPP methods shows that X2C essentially reproduces the solvent effect obtained with the 4c methods.
△ Less
Submitted 15 September, 2022; v1 submitted 14 December, 2021;
originally announced December 2021.
-
Investigating the influence of relativistic effects on absorption spectra for platinum complexes with light-activated activity against cancer cells
Authors:
Joel Creutzberg,
Erik Donovan Hedegård
Abstract:
We report the first investigation of relativistic effects on the UV-vis spectra of two prototype complexes for so-called photo-activated chemotherapy (PACT), trans-trans-trans-[Pt(N3)2(OH)2(NH3)2] and cis-trans-cis-[Pt(N3)2(OH)2(NH3)2].In PACT, design of new drugs requires in-depth understanding of the photo-activation mechanisms. A first step is usually to rationalize their UV-vis spectra for whi…
▽ More
We report the first investigation of relativistic effects on the UV-vis spectra of two prototype complexes for so-called photo-activated chemotherapy (PACT), trans-trans-trans-[Pt(N3)2(OH)2(NH3)2] and cis-trans-cis-[Pt(N3)2(OH)2(NH3)2].In PACT, design of new drugs requires in-depth understanding of the photo-activation mechanisms. A first step is usually to rationalize their UV-vis spectra for which time-dependent density functional theory (TD-DFT) is an indispensable tool. We carried out TD-DFT calculations with a systematic series of non-relativistic(NR), scalar-relativistic (SR), and four-component (4c) Hamiltonians. Large differences are found between spectra calculated within 4c and NR frameworks, while the most intense features (found at higher energies below 300 nm) can be reasonably well reproduced within a SR framework. Yet the underlying transitions can be strongly influenced by spin-orbit coupling introduced in the 4c framework: while this can affect both intense and less intense transitions in the spectra, the effect is most pronounced for weaker transitions at lower energies, above 300 nm. Since the investigated complexes are activated with light of wavelengths above 300 nm, employing a method with explicit inclusion of spin-orbit coupling may be crucial to rationalize the activation mechanism. All calculations were carried out with both the CAM-B3LYP and B3LYP functionals; we generally find the former to perform best in comparison with experimental spectra.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
The DIRAC code for relativistic molecular calculations
Authors:
Trond Saue,
Radovan Bast,
Andre Severo Pereira Gomes,
Hans Jørgen Aagaard Jensen,
Lucas Visscher,
Ignacio Agustın Aucar,
Roberto Di Remigio,
Kenneth G. Dyall,
Ephraim Eliav,
Elke Faßhauer,
Timo Fleig,
Loıc Halbert,
Erik Donovan Hedegård,
Benjamin Helmich-Paris,
Miroslav Iliaš,
Christoph R. Jacob,
Stefan Knecht,
Jon K Laerdahl,
Marta L. Vidal,
Malaya K Nayak,
Małgorzata Olejniczak,
Jógvan Magnus Haugaard Olsen,
Markus Pernpointner,
Bruno Senjean,
Avijit Shee
, et al. (2 additional authors not shown)
Abstract:
DIRAC is a freely distributed general-purpose program system for 1-, 2- and 4-component relativistic molecular calculations at the level of Hartree--Fock, Kohn--Sham (including range-separated theory), multiconfigurational self-consistent-field, multireference configuration interaction, coupled cluster and electron propagator theory. At the self-consistent-field level a highly original scheme, bas…
▽ More
DIRAC is a freely distributed general-purpose program system for 1-, 2- and 4-component relativistic molecular calculations at the level of Hartree--Fock, Kohn--Sham (including range-separated theory), multiconfigurational self-consistent-field, multireference configuration interaction, coupled cluster and electron propagator theory. At the self-consistent-field level a highly original scheme, based on quaternion algebra, is implemented for the treatment of both spatial and time reversal symmetry. DIRAC features a very general module for the calculation of molecular properties that to a large extent may be defined by the user and further analyzed through a powerful visualization module. It allows the inclusion of environmental effects through three different classes of increasingly sophisticated embedding approaches: the implicit solvation polarizable continuum model, the explicit polarizable embedding, and frozen density embedding models. DIRAC was one of the earliest codes for relativistic molecular calculations and remains a reference in its field.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
Is density functional theory accurate for lytic polysaccharide monooxygenase enzymes?
Authors:
Ernst D. Larsson,
Geng Dong,
Valera Veryazov,
Ulf Ryde,
Erik D. Hedegård
Abstract:
The lytic polysaccharide monooxygenase (LPMO) enzymes boost polysaccharide depolymerization through oxidative chemistry, which has fueled the hope for more energy-efficient production of biofuel. We have recently proposed a mechanism for the oxidation of the polysaccharide substrate (Hedegård & Ryde, Chem. Sci. 2018, 9, 3866). In this mechanism, complexes with superoxide, oxyl, as well as hydroxyl…
▽ More
The lytic polysaccharide monooxygenase (LPMO) enzymes boost polysaccharide depolymerization through oxidative chemistry, which has fueled the hope for more energy-efficient production of biofuel. We have recently proposed a mechanism for the oxidation of the polysaccharide substrate (Hedegård & Ryde, Chem. Sci. 2018, 9, 3866). In this mechanism, complexes with superoxide, oxyl, as well as hydroxyl (i.e. [CuO2]+, [CuO]+ and [CuOH]2+) cores were involved. These complexes can have both singlet and triplet spin states, and both spin-states may be important for how LPMOs function during catalytic turnover. Previous calculations on LPMOs have exclusively been based on density functional theory (DFT). However, different DFT functionals are known to display large differences for spin-state splittings in transition-metal complexes, and this has also been an issue for LPMOs. In this paper, we study the accuracy of DFT for spin-state splittings in superoxide, oxyl, and hydroxyl intermediates involved in LPMO turnover. As reference we employ multiconfigurational perturbation theory (CASPT2).
△ Less
Submitted 21 December, 2019; v1 submitted 21 November, 2019;
originally announced November 2019.
-
Molecular mechanism of lytic polysaccharide monooxygenases
Authors:
Erik D. Hedegård,
Ulf Ryde
Abstract:
The lytic polysaccharide monooxygenases (LPMOs) are copper metalloenzymes that can enhance polysaccharide depolymerization through an oxidative mechanism and hence boost generation of biofuel from e.g. cellulose. By employing density functional theory in a combination of quantum mechanics and molecular mechanics (QM/MM), we report a complete description of the molecular mechanism of LPMOs. The QM/…
▽ More
The lytic polysaccharide monooxygenases (LPMOs) are copper metalloenzymes that can enhance polysaccharide depolymerization through an oxidative mechanism and hence boost generation of biofuel from e.g. cellulose. By employing density functional theory in a combination of quantum mechanics and molecular mechanics (QM/MM), we report a complete description of the molecular mechanism of LPMOs. The QM/MM scheme allows us to describe all reaction steps with a detailed protein environment and we show that this is necessary. Several active species capable of abstracting a hydrogen from the substrate have been proposed previously. We investigate previously suggested paths as well as new ones. We describe the generation of the reactive intermediates, the abstraction of a hydrogen atom from the polysaccharide substrate, as well as the final recombination step in which OH is transferred back to the substrate. We show that a superoxo [CuO2]+ complex can be protonated by a nearby histidine residue (suggested by recent mutagenesis studies and crystallographic work) and, provided an electron source is available, leads to formation of an oxyl-complex after cleavage of the O-O bond and dissociation of water. The oxyl complex either reacts with the substrate or is further protonated to a hydroxyl complex. Both the oxyl and hydroxyl complexes are also readily generated from a reaction with H2O2. The C-H abstraction by the oxyl and hydroxy complexes is overall favorable with activation barriers of 69 and 94 kJ/mol, compared to the much higher barrier (156 kJ/mol) obtained for the copper-superoxo species. We obtain good structural agreement for intermediates for which structural data are available and the estimated reaction energies agree with experimental rate constants. Thus, our suggested mechanism is the most complete to date and concur with available experimental evidence.
△ Less
Submitted 9 June, 2018; v1 submitted 23 January, 2018;
originally announced January 2018.
-
Multiconfigurational Short-Range Density-Functional Theory for Open-Shell Systems
Authors:
Erik Donovan Hedegård,
Julien Toulouse,
Hans Jørgen Aagaard Jensen
Abstract:
Many chemical systems cannot be described by quantum chemistry methods based on a singlereference wave function. Accurate predictions of energetic and spectroscopic properties require a delicate balance between describing the most important configurations (static correlation) and obtaining dynamical correlation efficiently. The former is most naturally done through a multiconfigurational (MC) wave…
▽ More
Many chemical systems cannot be described by quantum chemistry methods based on a singlereference wave function. Accurate predictions of energetic and spectroscopic properties require a delicate balance between describing the most important configurations (static correlation) and obtaining dynamical correlation efficiently. The former is most naturally done through a multiconfigurational (MC) wave function, whereas the latter can be done by, e.g., perturbation theory. We have employed a different strategy, namely, a hybrid between multiconfigurational wave functions and density-functional theory (DFT) based on range separation. The method is denoted by MC short-range (sr) DFT and is more efficient than perturbative approaches as it capitalizes on the efficient treatment of the (short-range) dynamical correlation by DFT approximations. In turn, the method also improves DFT with standard approximations through the ability of multiconfigurational wave functions to recover large parts of the static correlation. Until now, our implementation was restricted to closed-shell systems, and to lift this restriction, we present here the generalization of MC-srDFT to open-shell cases. The additional terms required to treat open-shell systems are derived and implemented in the DALTON program. This new method for open-shell systems is illustrated on dioxygen and [Fe(H2O)6]3+.
△ Less
Submitted 8 June, 2018; v1 submitted 10 November, 2017;
originally announced November 2017.
-
Exploration of H2 binding to the [NiFe]-hydrogenase active site with multiconfigurational density functional theory
Authors:
Geng Dong,
Ulf Ryde,
Hans Jørgen Aa. Jensen,
Erik D. Hedegård
Abstract:
The combination of density functional theory (DFT) with a multiconfigurational wave function is an efficient way to include dynamical correlation in calculations with multiconfiguration self-consistent field wave functions. These methods can potentially be employed to elucidate reaction mechanisms in bio-inorganic chemistry, where many other methods become either too computationally expensive or t…
▽ More
The combination of density functional theory (DFT) with a multiconfigurational wave function is an efficient way to include dynamical correlation in calculations with multiconfiguration self-consistent field wave functions. These methods can potentially be employed to elucidate reaction mechanisms in bio-inorganic chemistry, where many other methods become either too computationally expensive or too inaccurate. In this paper, a complete active space (CAS) short-range DFT (CAS-srDFT) hybrid was employed to investigate a bio-inorganic system, namely H2 binding to the active site of [NiFe] hydrogenase. This system was previously investigated with coupled-cluster (CC) and multiconfigurational methods in form of cumulant-approximated second-order perturbation theory, based on the density matrix renormalization group (DMRG). We find that it is more favorable for H2 to bind to Ni than to Fe, in agreement with previous CC and DMRG calculations. The accuracy of CAS-srDFT is comparable to both CC and DMRG, despite that much smaller active spaces were employed. This enhanced efficiency at smaller active spaces shows that CAS-srDFT can become a useful method for bio-inorganic chemistry.
△ Less
Submitted 5 October, 2017;
originally announced October 2017.
-
Modeling the absorption spectrum of the permanganate ion in vacuum and in aqueous solution
Authors:
Jógvan Magnus Haugaard Olsen,
Erik Donovan Hedegård
Abstract:
The absorption spectrum of the MnO$_{4}$$^{-}$ ion has been a test-bed for quantum-chemical methods over the last decades. Its correct description requires highly-correlated multiconfigurational methods, which are incompatible with the inclusion of finite-temperature and solvent effects due to their high computational demands. Therefore, implicit solvent models are usually employed. Here we show t…
▽ More
The absorption spectrum of the MnO$_{4}$$^{-}$ ion has been a test-bed for quantum-chemical methods over the last decades. Its correct description requires highly-correlated multiconfigurational methods, which are incompatible with the inclusion of finite-temperature and solvent effects due to their high computational demands. Therefore, implicit solvent models are usually employed. Here we show that implicit solvent models are not sufficiently accurate to model the solvent shift of MnO$_{4}$$^{-}$, and we analyze the origins of their failure. We obtain the correct solvent shift for MnO$_{4}$$^{-}$ in aqueous solution by employing the polarizable embedding (PE) model combined with a range-separated complete active space short-range density functional theory method (CAS-srDFT). Finite-temperature effects are taken into account by averaging over structures obtained from ab initio molecular dynamics simulations. The explicit treatment of finite-temperature and solvent effects facilitates the interpretation of the bands in the low-energy region of the MnO$_{4}$$^{-}$ absorption spectrum, whose assignment has been elusive.
△ Less
Submitted 22 February, 2017; v1 submitted 20 January, 2017;
originally announced January 2017.
-
Multiscale Modelling of Lytic Polysaccharide Monooxygenases
Authors:
Erik D. Hedegård,
Ulf Ryde
Abstract:
Lytic polysaccharide monooxygenase (LPMO) enzymes have attracted considerable attention due to their ability to enhance polysaccharide depolymerization, making them interesting in respect to production of biofuel from cellulose. The LPMOs are metalloenzymes that contain a mononuclear copper active site that can active dioxygen. However, many details of this activation are unclear, and have previou…
▽ More
Lytic polysaccharide monooxygenase (LPMO) enzymes have attracted considerable attention due to their ability to enhance polysaccharide depolymerization, making them interesting in respect to production of biofuel from cellulose. The LPMOs are metalloenzymes that contain a mononuclear copper active site that can active dioxygen. However, many details of this activation are unclear, and have previously been investigated from a computational angle. Yet, these studies have either employed only molecular mechanics (MM), which are inaccurate for metal active sites, or they have described only the active site with quantum mechanics (QM) and neglected the effect of the protein. Here, we employ hybrid QM and MM (QM/MM) methods to investigate the first steps of the LPMO mechanism, which is reduction of of Cu(II) to Cu(I) and formation of a Cu(II)-superoxide complex. In the latter complex, the superoxide can bind either in an equatorial or an axial position. For both steps we obtain structures that are markedly different from previous suggestions, based on vacuum calculations. Our calculations show that the equatorial isomer of the superoxide complex is over 60 kJ/mol more stable than the axial isomer, being stabilized by interactions with a second-coordination-sphere Gln residue, showing a possible role for this residue. Coordination of superoxide in this manner is in agreement with recent experimental suggestions.
△ Less
Submitted 7 February, 2017; v1 submitted 16 December, 2016;
originally announced December 2016.
-
The Polarizable Embedding Density Matrix Renormalization Group Method
Authors:
Erik D. Hedegård,
Markus Reiher
Abstract:
The polarizable embedding (PE) approach is a flexible embedding model where a pre-selected region out of a larger system is described quantum mechanically while the interaction with the surrounding environment is modeled through an effective operator. This effective operator represents the environment by atom-centered multipoles and polarizabilities derived from quantum mechanical calculations on…
▽ More
The polarizable embedding (PE) approach is a flexible embedding model where a pre-selected region out of a larger system is described quantum mechanically while the interaction with the surrounding environment is modeled through an effective operator. This effective operator represents the environment by atom-centered multipoles and polarizabilities derived from quantum mechanical calculations on (fragments of) the environment. Thereby, the polarization of the environment is explicitly accounted for. Here, we present the coupling of the PE approach with the density matrix renormalization group (DMRG). This PE-DMRG method is particularly suitable for embedded subsystems that feature a dense manifold of frontier orbitals which requires large active spaces. Recovering such static electron-correlation effects in multiconfigurational electronic structure problems, while accounting for both electrostatics and polarization of a surrounding environment, allows us to describe strongly correlated electronic structures in complex molecular environments. We investigate various embedding potentials for the well-studied first excited state of water with active spaces that correspond to a full configuration-interaction treatment. Moreover, we study the environment effect on the first excited state of a retinylidene Schiff base within a channelrhodopsin protein. For this system, we also investigate the effect of dynamical correlation included through short-range density functional theory.
△ Less
Submitted 17 August, 2016; v1 submitted 10 May, 2016;
originally announced May 2016.
-
New Approaches for ab initio Calculations of Molecules with Strong Electron Correlation
Authors:
Stefan Knecht,
Erik Donovan Hedegård,
Sebastian Keller,
Arseny Kovyrshin,
Yingjin Ma,
Andrea Muolo,
Christopher J. Stein,
Markus Reiher
Abstract:
Reliable quantum chemical methods for the description of molecules with dense-lying frontier orbitals are needed in the context of many chemical compounds and reactions. Here, we review developments that led to our newcomputational toolbo x which implements the quantum chemical density matrix renormalization group in a second-generation algorithm. We present an overview of the different components…
▽ More
Reliable quantum chemical methods for the description of molecules with dense-lying frontier orbitals are needed in the context of many chemical compounds and reactions. Here, we review developments that led to our newcomputational toolbo x which implements the quantum chemical density matrix renormalization group in a second-generation algorithm. We present an overview of the different components of this toolbox.
△ Less
Submitted 21 April, 2016; v1 submitted 31 December, 2015;
originally announced December 2015.
-
Combining linear interpolation with extrapolation methods in range-separated ensemble density-functional theory
Authors:
Bruno Senjean,
Erik D. Hedegård,
Md. Mehboob Alam,
Stefan Knecht,
Emmanuel Fromager
Abstract:
The combination of a recently proposed linear interpolation method (LIM) [Senjean et al., Phys. Rev. A 92, 012518 (2015)], which enables the calculation of weight-independent excitation energies in range-separated ensemble density-functional approximations, with the extrapolation scheme of Savin [J. Chem. Phys. 140, 18A509 (2014)] is presented in this work. It is shown that LIM excitation energies…
▽ More
The combination of a recently proposed linear interpolation method (LIM) [Senjean et al., Phys. Rev. A 92, 012518 (2015)], which enables the calculation of weight-independent excitation energies in range-separated ensemble density-functional approximations, with the extrapolation scheme of Savin [J. Chem. Phys. 140, 18A509 (2014)] is presented in this work. It is shown that LIM excitation energies vary quadratically with the inverse of the range-separation parameter mu when the latter is large. As a result, the extrapolation scheme, which is usually applied to long-range interacting energies, can be adapted straightforwardly to LIM. This extrapolated LIM (ELIM) has been tested on a small test set consisting of He, Be, H2 and HeH+. Relatively accurate results have been obtained for the first singlet excitation energies with the typical mu=0.4 value. The improvement of LIM after extrapolation is remarkable, in particular for the doubly-excited 2^1Sigma+g state in the stretched H2 molecule. Three-state ensemble calculations in H2 also show that ELIM does not necessarily improves relative excitation energies, even though individual excitation energies are more accurate after extrapolation. Finally, an alternative decomposition of the short-range ensemble exchange-correlation energy is proposed in order to correct for ghost-interaction errors in multideterminant range-separated ensemble density-functional theory calculations. The implementation and calibration of such a scheme is currently in progress.
△ Less
Submitted 6 November, 2015; v1 submitted 26 September, 2015;
originally announced September 2015.
-
Density Matrix Renormalization Group with Efficient Dynamical Electron Correlation Through Range Separation
Authors:
Erik Donovan Hedegård,
Stefan Knecht,
Jesper Skau Kielberg,
Hans Jørgen Aagaard Jensen,
Markus Reiher
Abstract:
We present a new hybrid multiconfigurational method based on the concept of range-separation that combines the density matrix renormalization group approach with density functional theory. This new method is designed for the simultaneous description of dynamical and static electron-correlation effects in multiconfigurational electronic structure problems.
We present a new hybrid multiconfigurational method based on the concept of range-separation that combines the density matrix renormalization group approach with density functional theory. This new method is designed for the simultaneous description of dynamical and static electron-correlation effects in multiconfigurational electronic structure problems.
△ Less
Submitted 28 May, 2015; v1 submitted 21 February, 2015;
originally announced February 2015.
-
Assessment of Charge-Transfer Excitations in Organic Dyes obtained from TD-srDFT Based on Long-Range MP2 and MCSCF Wave Functions
Authors:
Erik D. Hedegård,
Frank Heiden,
Stefan Knecht,
Emmanuel Fromager,
Hans Jørgen Aa. Jensen
Abstract:
Charge transfer excitations can be described within TD-DFT, not only by means of long-range corrected exchange functionals but also with a combination of wave function theory and TD-DFT based on range separation. The latter approach enables a rigorous formulation of multi-determinantal TD-DFT schemes where excitation classes, which are absent in conventional TD-DFT spectra (like for example double…
▽ More
Charge transfer excitations can be described within TD-DFT, not only by means of long-range corrected exchange functionals but also with a combination of wave function theory and TD-DFT based on range separation. The latter approach enables a rigorous formulation of multi-determinantal TD-DFT schemes where excitation classes, which are absent in conventional TD-DFT spectra (like for example double excitations), can be addressed. This paper investigates the combination of both the long-range MCSCF and SOPPA ansätze with a short-range DFT (srDFT) description. We find that the combinations of SOPPA or MCSCF with TD-DFT yield better results than could be expected from the pure wave function schemes. For the Time-Dependent MCSCF short-range DFT ansatz (TD-MC-srDFT) excitation energies calculated over a larger benchmark set of molecules with predominantly single reference character yield good agreement with their reference values, and are in general comparable to the long-range corrected functional CAM-B3LYP. The SOPPA-srDFT scheme is tested for a subset of molecules used for benchmarking TD-MC-srDFT and performs slightly better against the reference data for this small subset. Beyond the proof-of-principle calculations comprising the first part of this contribution, we additionally studied the low-lying singlet excited states (S1 and S2) of the retinal chromophore. The chromophore displays multireference character in the ground state and both excited states exhibit considerable double excitation character, which in turn cannot be described within standard TD-DFT, due to the adiabatic approximation. However, a TD-MC-srDFT approach can account for the multireference character, and excitation energies are obtained with accuracy comparable to CASPT2, although using a much smaller active space.
△ Less
Submitted 22 August, 2013;
originally announced August 2013.
