Showing 1–8 of 8 results for author: Hare, T

A Precision Cryogenic Positioning Stage for Detector Dithering and Flexure Compensation

Authors: Stephen A. Smee, Stephen C. Hope, Randolph P. Hammond, Leon Aslan, Robert H. Barkhouser, Katherine G. Smee, Andrea Bianco, Christoph Birk, Maren Cosens, Aidan C. Gray, Michele Frangiamore, Albert C. Harding, Tyson Hare, Daniel D. Kelson, Gerrad Killion, Nicholas P. Konidaris II, Alicia Lanz, Jacob McCloskey, Andrew B. Newman, Solange Ramirez, Gwen C. Rudie, Andrea Vanella, Jason E. Williams

Abstract: This paper presents the design and technical progress of a precision X-Y stage for detector dithering and flexure compensation. The stage is being developed for use in the Magellan InfraRed Multi-Object Spectrograph, MIRMOS. MIRMOS is a very large Nasmyth mounted spectrograph containing a combination of refractive, reflective and diffractive optics mounted on a long cryogenic optical bench. The in… ▽ More This paper presents the design and technical progress of a precision X-Y stage for detector dithering and flexure compensation. The stage is being developed for use in the Magellan InfraRed Multi-Object Spectrograph, MIRMOS. MIRMOS is a very large Nasmyth mounted spectrograph containing a combination of refractive, reflective and diffractive optics mounted on a long cryogenic optical bench. The instrument utilizes five science cameras, each having a custom x-y stage to control the in-plane detector position within each camera, providing both dithering capability for improved sampling, and flexure compensation to correct for image motion that results from the gravity variant operation of the instrument. Designed to operate at 120~K, the stage will accurately control detector position in two orthogonal degrees of freedom, and have manual fine adjustment features to set detector tip, tilt and piston. The piezo-driven flexure stage provides high-resolution backlash-free motion of the detector and is very compact along the optical path, keeping camera length to a minimum. A magnetoresistive bridge provides position feedback in each degree of freedom, greatly reducing hysteresis, which is common in piezoelectric actuators. The system is designed to operate in open loop using a lookup table keyed to the Nasmyth rotator angle for flexure control. Here, the optomechanical design of the stage, electrical control system, and current performance results from early prototype efforts are presented and discussed. △ Less

Submitted 19 July, 2024; originally announced July 2024.

Comments: Proceedings of SPIE Astronomical Telescopes + Instrumentation 2024, 11 pages, 10 figures

Journal ref: Proc. SPIE, Technologies for Vacuum and Cryogenic Instruments I, Paper No. 13100-107 (June 2024)

A Novel Freeform Slicer IFU for the Magellan InfraRed Multi-Object Spectrograph (MIRMOS)

Authors: Maren Cosens, Nicholas P. Konidaris II, Gwen C. Rudie, Andrew B. Newman, Gerrad Killion, Leon Aslan, Robert Barkhouser, Andrea Bianco, Christoph Birk, Julia Brady, Michele Frangiamore, Tyson Hare, Stephen C. Hope, Daniel D. Kelson, Alicia Lanz, Solange Ramirez, Stephen A. Smee, Andrea Vanella, Jason E. Williams

Abstract: The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) is a planned next generation multi-object and integral field spectrograph for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform R$\sim$3700 spectroscopy over a simultaneous wavelength range of 0.886 - 2.404$μ$m (Y,J,H,K bands) in addition to imaging over the range of 0.7 - 0.886$μ$m. The integral field mo… ▽ More The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) is a planned next generation multi-object and integral field spectrograph for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform R$\sim$3700 spectroscopy over a simultaneous wavelength range of 0.886 - 2.404$μ$m (Y,J,H,K bands) in addition to imaging over the range of 0.7 - 0.886$μ$m. The integral field mode of operation for MIRMOS will be achieved via an image slicer style integral field unit (IFU) located on a linear stage to facilitate movement into the beam during use or storage while operating in multi-object mode. The IFU will provide a $\rm \sim20"\times26"$ field of view (FoV) made up of $\rm0.84"\times26"$ slices. This will be the largest FoV IFS operating at these wavelengths from either the ground or space, making MIRMOS an ideal instrument for a wide range of science cases including studying the high redshift circumgalactic medium and emission line tracers from ionized and molecular gas in nearby galaxies. In order to achieve the desired image quality and FoV while matching the focal ratio to the multi-object mode, our slicer design makes use of novel freeform surfaces for the pupil mirrors, which require the use of high precision multi-axis diamond milling to manufacture. We present here the optical design and predicted performance of the MIRMOS IFU along with a conceptual design for the opto-mechanical system. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Comments: Proceedings of SPIE Astronomical Telescopes + Instrumentation 2024, 9 pages, 6 figures

Journal ref: Proc. SPIE, Ground-based and Airborne Instrumentation for Astronomy X, Paper No. 13096-321 (June 2024)

Maximizing the value of Solar System data through Planetary Spatial Data Infrastructures

Authors: Jani Radebaugh, Bradley J. Thomson, Brent Archinal, Ross Beyer, Dani DellaGiustina, Caleb Fassett, Lisa Gaddis, Sander Goossens, Trent Hare, Jay Laura, Pete Mouginis-Mark, Andrea Naß, Alex Patthoff, Julie Stopar, Sarah Sutton, David Williams, Justin Hagerty, Louise Prockter

Abstract: Planetary spatial data returned by spacecraft, including images and higher-order products such as mosaics, controlled basemaps, and digital elevation models (DEMs), are of critical importance to NASA, its commercial partners and other space agencies. Planetary spatial data are an essential component of basic scientific research and sustained planetary exploration and operations. The Planetary Data… ▽ More Planetary spatial data returned by spacecraft, including images and higher-order products such as mosaics, controlled basemaps, and digital elevation models (DEMs), are of critical importance to NASA, its commercial partners and other space agencies. Planetary spatial data are an essential component of basic scientific research and sustained planetary exploration and operations. The Planetary Data System (PDS) is performing the essential job of archiving and serving these data, mostly in raw or calibrated form, with less support for higher-order, more ready-to-use products. However, many planetary spatial data remain not readily accessible to and/or usable by the general science user because particular skills and tools are necessary to process and interpret them from the raw initial state. There is a critical need for planetary spatial data to be more accessible and usable to researchers and stakeholders. A Planetary Spatial Data Infrastructure (PSDI) is a collection of data, tools, standards, policies, and the people that use and engage with them. A PSDI comprises an overarching support system for planetary spatial data. PSDIs (1) establish effective plans for data acquisition; (2) create and make available higher-order products; and (3) consider long-term planning for correct data acquisition, processing and serving (including funding). We recommend that Planetary Spatial Data Infrastructures be created for all bodies and key regions in the Solar System. NASA, with guidance from the planetary science community, should follow established data format standards to build foundational and framework products and use those to build and apply PDSIs to all bodies. Establishment of PSDIs is critical in the coming decade for several locations under active or imminent exploration, and for all others for future planning and current scientific analysis. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: 8 pages, 0 figures. White paper submitted to the Planetary Science and Astrobiology Decadal Survey 2023-2032

LATIS: The Ly$α$ Tomography IMACS Survey

Authors: Andrew B. Newman, Gwen C. Rudie, Guillermo A. Blanc, Daniel D. Kelson, Sunny Rhoades, Tyson Hare, Victoria Pérez, Andrew J. Benson, Alan Dressler, Valentino Gonzalez, Juna A. Kollmeier, Nicholas P. Konidaris, John S. Mulchaey, Michael Rauch, Olivier Le Fèvre, Brian C. Lemaux, Olga Cucciati, Simon J. Lilly

Abstract: We introduce LATIS, the Ly$α$ Tomography IMACS Survey, a spectroscopic survey at Magellan designed to map the z=2.2-2.8 intergalactic medium (IGM) in three dimensions by observing the Ly$α$ forest in the spectra of galaxies and QSOs. Within an area of 1.7 deg${}^2$, we will observe approximately half of $\gtrsim L^*$ galaxies at z=2.2-3.2 for typically 12 hours, providing a dense network of sightl… ▽ More We introduce LATIS, the Ly$α$ Tomography IMACS Survey, a spectroscopic survey at Magellan designed to map the z=2.2-2.8 intergalactic medium (IGM) in three dimensions by observing the Ly$α$ forest in the spectra of galaxies and QSOs. Within an area of 1.7 deg${}^2$, we will observe approximately half of $\gtrsim L^*$ galaxies at z=2.2-3.2 for typically 12 hours, providing a dense network of sightlines piercing the IGM with an average transverse separation of 2.5 $h^{-1}$ comoving Mpc (1 physical Mpc). At these scales, the opacity of the IGM is expected to be closely related to the dark matter density, and LATIS will therefore map the density field in the $z \sim 2.5$ universe at $\sim$Mpc resolution over the largest volume to date. Ultimately LATIS will produce approximately 3800 spectra of z=2.2-3.2 galaxies that probe the IGM within a volume of $4 \times 10^6 h^{-3}$ Mpc${}^3$, large enough to contain a representative sample of structures from protoclusters to large voids. Observations are already complete over one-third of the survey area. In this paper, we describe the survey design and execution. We present the largest IGM tomographic maps at comparable resolution yet made. We show that the recovered matter overdensities are broadly consistent with cosmological expectations based on realistic mock surveys, that they correspond to galaxy overdensities, and that we can recover structures identified using other tracers. LATIS is conducted in Canada-France-Hawaii Telescope Legacy Survey fields, including COSMOS. Coupling the LATIS tomographic maps with the rich data sets collected in these fields will enable novel studies of environment-dependent galaxy evolution and the galaxy-IGM connection at cosmic noon. △ Less

Submitted 25 February, 2020; originally announced February 2020.

Comments: accepted to ApJ; Fig. 26 contains animated rendering of the IGM maps

Interoperability in Planetary Research for Geospatial Data Analysis

Authors: Trent M. Hare, Angelo P. Rossi, Alessandro Frigeri, Chiara Marmo

Abstract: For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a pla… ▽ More For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a planetary body (including moons, comets or asteroids). Several U.S. and international cartographic research institutions have converged on mapping standards that embrace standardized geospatial image formats, geologic mapping conventions, U.S. Federal Geographic Data Committee (FGDC) cartographic and metadata standards, and notably on-line mapping services as defined by the Open Geospatial Consortium (OGC). △ Less

Submitted 8 June, 2017; originally announced June 2017.

Comments: 15 pages, 3 figures, from American Geophysical Union 2015 invited talk, In Press

MagAO: Status and on-sky performance of the Magellan adaptive optics system

Authors: Katie M. Morzinski, Laird M. Close, Jared R. Males, Derek Kopon, Phil M. Hinz, Simone Esposito, Armando Riccardi, Alfio Puglisi, Enrico Pinna, Runa Briguglio, Marco Xompero, Fernando Quirós-Pacheco, Vanessa Bailey, Katherine B. Follette, T. J. Rodigas, Ya-Lin Wu, Carmelo Arcidiacono, Javier Argomedo, Lorenzo Busoni, Tyson Hare, Alan Uomoto, Alycia Weinberger

Abstract: MagAO is the new adaptive optics system with visible-light and infrared science cameras, located on the 6.5-m Magellan "Clay" telescope at Las Campanas Observatory, Chile. The instrument locks on natural guide stars (NGS) from 0$^\mathrm{th}$ to 16$^\mathrm{th}$ $R$-band magnitude, measures turbulence with a modulating pyramid wavefront sensor binnable from 28x28 to 7x7 subapertures, and uses a 58… ▽ More MagAO is the new adaptive optics system with visible-light and infrared science cameras, located on the 6.5-m Magellan "Clay" telescope at Las Campanas Observatory, Chile. The instrument locks on natural guide stars (NGS) from 0$^\mathrm{th}$ to 16$^\mathrm{th}$ $R$-band magnitude, measures turbulence with a modulating pyramid wavefront sensor binnable from 28x28 to 7x7 subapertures, and uses a 585-actuator adaptive secondary mirror (ASM) to provide flat wavefronts to the two science cameras. MagAO is a mutated clone of the similar AO systems at the Large Binocular Telescope (LBT) at Mt. Graham, Arizona. The high-level AO loop controls up to 378 modes and operates at frame rates up to 1000 Hz. The instrument has two science cameras: VisAO operating from 0.5-1 $μ$m and Clio2 operating from 1-5 $μ$m. MagAO was installed in 2012 and successfully completed two commissioning runs in 2012-2013. In April 2014 we had our first science run that was open to the general Magellan community. Observers from Arizona, Carnegie, Australia, Harvard, MIT, Michigan, and Chile took observations in collaboration with the MagAO instrument team. Here we describe the MagAO instrument, describe our on-sky performance, and report our status as of summer 2014. △ Less

Submitted 18 July, 2014; originally announced July 2014.

Comments: 13 pages, 11 figures, to appear in Proc. SPIE 9148-3

Diffraction-limited Visible Light Images of Orion Trapezium Cluster With the Magellan Adaptive Secondary AO System (MagAO)

Authors: L. M. Close, J. R. Males, K. Morzinski, D. Kopon, K. Follette, T. J. Rodigas, P. Hinz, Y-L. Wu, A. Puglisi, S. Esposito, A. Riccardi, E. Pinna, M. Xompero, R. Briguglio, A. Uomoto, T. Hare

Abstract: We utilized the new high-order (250-378 mode) Magellan Adaptive Optics system (MagAO) to obtain very high spatial resolution observations in "visible light" with MagAO's VisAO CCD camera. In the good-median seeing conditions of Magellan (0.5-0.7") we find MagAO delivers individual short exposure images as good as 19 mas optical resolution. Due to telescope vibrations, long exposure (60s) r' (0.63… ▽ More We utilized the new high-order (250-378 mode) Magellan Adaptive Optics system (MagAO) to obtain very high spatial resolution observations in "visible light" with MagAO's VisAO CCD camera. In the good-median seeing conditions of Magellan (0.5-0.7") we find MagAO delivers individual short exposure images as good as 19 mas optical resolution. Due to telescope vibrations, long exposure (60s) r' (0.63 micron) images are slightly coarser at FWHM=23-29 mas (Strehl ~28%) with bright (R<9 mag) guide stars. These are the highest resolution filled-aperture images published to date. Images of the young (~1 Myr) Orion Trapezium Theta 1 Ori A, B, and C cluster members were obtained with VisAO. In particular, the 32 mas binary Theta 1 Ori C1/C2 was easily resolved in non-interferometric images for the first time. Relative positions of the bright trapezium binary stars were measured with ~0.6-5 mas accuracy. We now are sensitive to relative proper motions of just ~0.2 mas/yr (~0.4 km/s at 414 pc) - this is a ~2-10x improvement in orbital velocity accuracy compared to previous efforts. For the first time, we see clear motion of the barycenter of Theta 1 Ori B2/B3 about Theta 1 Ori B1. All five members of the Theta 1 Ori B system appear likely a gravitationally bound "mini-cluster", but we find that not all the orbits can be both circular and co-planar. The lowest mass member of the Theta 1 Ori B system (B4; mass ~0.2 Msun) has a very clearly detected motion (at 4.1+/-1.3 km/s; correlation=99.9%) w.r.t B1 and will likely be ejected in the future. This "ejection" process of the lowest mass member of a "mini-cluster" could play a major role in the formation of low mass stars and brown dwarfs.(slightly abridged abstract) △ Less

Submitted 19 August, 2013; originally announced August 2013.

Comments: 35 pages, 17 figures, to appear in the Sept. 10, 2013 issue of ApJ

MMTF: The Maryland-Magellan Tunable Filter

Authors: S. Veilleux, B. J. Weiner, D. S. N. Rupke, M. McDonald, C. Birk, J. Bland-Hawthorn, A. Dressler, T. Hare, D. Osip, C. Pietraszewski, S. N. Vogel

Abstract: This paper describes the Maryland-Magellan Tunable Filter (MMTF) on the Magellan-Baade 6.5-meter telescope. MMTF is based on a 150-mm clear aperture Fabry-Perot (FP) etalon that operates in low orders and provides transmission bandpass and central wavelength adjustable from ~5 to ~15 A and from ~5000 to over ~9200 A, respectively. It is installed in the Inamori Magellan Areal Camera and Spectrog… ▽ More This paper describes the Maryland-Magellan Tunable Filter (MMTF) on the Magellan-Baade 6.5-meter telescope. MMTF is based on a 150-mm clear aperture Fabry-Perot (FP) etalon that operates in low orders and provides transmission bandpass and central wavelength adjustable from ~5 to ~15 A and from ~5000 to over ~9200 A, respectively. It is installed in the Inamori Magellan Areal Camera and Spectrograph (IMACS) and delivers an image quality of ~0.5" over a field of view of 27' in diameter (monochromatic over ~10'). This versatile and easy-to-operate instrument has been used over the past three years for a wide variety of projects. This paper first reviews the basic principles of FP tunable filters, then provides a detailed description of the hardware and software associated with MMTF and the techniques developed to observe with this instrument and reduce the data. The main lessons learned in the course of the commissioning and implementation of MMTF are highlighted next, before concluding with a brief outlook on the future of MMTF and of similar facilities which are soon coming on line. △ Less

Submitted 7 November, 2009; v1 submitted 12 August, 2009; originally announced August 2009.

Comments: 38 pages, 12 figures, 3 tables, now accepted for publication to the Astronomical Journal