-
Training and Upgrading Tokamak Power Plants with Remountable Superconducting Magnets
Authors:
S. B. L. Chislett-McDonald,
E. Surrey,
J. Naish,
A. Turner,
D. P. Hampshire
Abstract:
All high field superconductors producing magnetic fields above 12 T are brittle. Nevertheless, they will probably be the materials of choice in commercial tokamaks because the fusion power density in a tokamak scales as the fourth power of magnetic field. Here we propose using robust, ductile superconductors during the reactor commissioning phase in order to avoid brittle magnet failure while oper…
▽ More
All high field superconductors producing magnetic fields above 12 T are brittle. Nevertheless, they will probably be the materials of choice in commercial tokamaks because the fusion power density in a tokamak scales as the fourth power of magnetic field. Here we propose using robust, ductile superconductors during the reactor commissioning phase in order to avoid brittle magnet failure while operational safety margins are being established. Here we use the PROCESS systems code to inform development strategy and to provide detailed capital-cost-minimised tokamak power plant designs. We propose building a 'demonstrator' tokamak with an electric power output of 100 MWe, a plasma fusion gain Qplasma = 17, a net gain Qnet = 1.3, a cost of electricity (COE) of \$ 1148 (2021 US) per MWh (at 75 % availability) and high temperature superconducting operational TF magnets producing 5.4 T on-axis and 12.5 T peak-field. It uses Nb-Ti training magnets and will cost about \$ 9.75 Bn (2021 US). An equivalent 500 MWe plant has a COE of \$ 608 per MW suggesting that large tokamaks may eventually dominate the commercial market. We consider a range of designs optimised for capital cost (as the reactors considered are pilot plants) consisting of both 100 MWe and 500 MWe plants with each of two approaches for the magnets: training and upgrading. With training magnets, the plant is cost-optimised for REBCO TF magnets. For a 100 MWe plant, the Nb-Ti training magnets typically produce 70 % peak field on the toroidal field coils compared to REBCO magnets, 65 % peak field on the central solenoid and cost approx. 10 % of the total machine cost. Training magnets could in principle be reused for each of say 10 subsequent (commercial) machines and hence at 1 % bring only marginal additional cost.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
The Critical Current Density of SNS Josephson Junctions and Polycrystalline Superconductors in High Magnetic Fields
Authors:
A. I. Blair,
D. P. Hampshire
Abstract:
We investigate the in-field critical current density Jc(B) of SNS Josephson Junctions (JJs) and polycrystalline superconductors with grain boundaries modelled as Josephson type planar defects, both analytically and through computational time-dependent Ginzburg-Landau (TDGL) simulations in 2D and 3D. For very narrow SNS JJs, we derive analytic expressions for Jc(B) that to our knowledge are the fir…
▽ More
We investigate the in-field critical current density Jc(B) of SNS Josephson Junctions (JJs) and polycrystalline superconductors with grain boundaries modelled as Josephson type planar defects, both analytically and through computational time-dependent Ginzburg-Landau (TDGL) simulations in 2D and 3D. For very narrow SNS JJs, we derive analytic expressions for Jc(B) that to our knowledge are the first high field solutions for Jc(B) for JJs across the entire field range up to the effective upper critical field. They generalise the well-known (low-field) exponential junction thickness dependence for Jc from de Gennes, often used in the Josephson relation. We extend the new analytic expressions to describe wider junctions and confirm their validity using TDGL optimised for high field applications. They provide an explanation for the B^{-0.6} field dependence found for Jc(B) in high temperature superconductors, and the Kramer dependence and inverse power-law grain size widely found in many low temperature superconductors.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
Successful production of Solution Blow Spun YBCO+Ag complex ceramics
Authors:
A. L. Pessoa,
M. J. Raine,
D. P. Hampshire,
D. K. Namburi,
J. H. Durrell,
R. Zadorosny
Abstract:
YBCO fabrics composed of nanowires, produced by solution blow spinning (SBS) are so brittle that the Lorentz force produced by induced currents can be strong enough to damage them. On the other hand, it is known that silver addition improves the mechanical and flux pinning properties of ceramic superconductors. Thus, in this work, we show how we successfully obtained a polymeric precursor solution…
▽ More
YBCO fabrics composed of nanowires, produced by solution blow spinning (SBS) are so brittle that the Lorentz force produced by induced currents can be strong enough to damage them. On the other hand, it is known that silver addition improves the mechanical and flux pinning properties of ceramic superconductors. Thus, in this work, we show how we successfully obtained a polymeric precursor solution containing YBCO$+$Ag salts, which can be spun by the SBS route to produce ceramic samples. Yttrium, barium, copper, and silver metal acetates, and polyvinylpyrrolidone (PVP) (in a ratio of 5:1wt [PVP:acetates]) were dissolved in a solution with 61.5 wt\% of methanol, 12 wt\% of propionic acid, and 26.5 wt\% of ammonium hydroxide, together with 6 wt\% of PVP in solution. Three different amounts of silver (10 wt\%, 20 wt\%, and 30 wt\%) were used in YBa$_2$Cu$_3$O$_{7-x}$. The TGA characterizations revealed a lowering of crystallization and partial melting temperatures by about \SI{30}{\celsius}. SEM images show that after burning out the polymer, a fabric composed of nanowires of diameters up to \SI{380}{\nano \metre} is produced. However, after the sintering process at \SI{925}{\celsius} for \SI{1}{\hour}, the nanowires shrink into a porous-like sample.
△ Less
Submitted 17 August, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Quantitative optical spectroscopy of $^{87}$Rb vapour in the Voigt geometry in DC magnetic fields up to 0.4T
Authors:
J. Keaveney,
F. S. Ponciano-Ojeda,
S. M. Rieche,
M. J. Raine,
D. P. Hampshire,
I. G. Hughes
Abstract:
We present a detailed spectroscopic investigation of a thermal $^{87}$Rb atomic vapour in magnetic fields up to 0.4T in the Voigt geometry. We fit experimental spectra with our theoretical model \textit{ElecSus} and find excellent quantitative agreement, with RMS errors of $\sim 0.3$%. We extract the magnetic field strength and the angle between the polarisation of the light and the magnetic field…
▽ More
We present a detailed spectroscopic investigation of a thermal $^{87}$Rb atomic vapour in magnetic fields up to 0.4T in the Voigt geometry. We fit experimental spectra with our theoretical model \textit{ElecSus} and find excellent quantitative agreement, with RMS errors of $\sim 0.3$%. We extract the magnetic field strength and the angle between the polarisation of the light and the magnetic field from the atomic signal and find excellent agreement to within $\sim 1$% with a commercial Hall probe. Finally, we present an investigation of the relative sensitivity of this technique to variations in the field strength and angle with a view to enabling atom-based high-field vector magnetometry.
△ Less
Submitted 23 February, 2019; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Josephson-like Colossal Resistive Switching in Nanocrystalline Y-Ba-Cu-O at Room Temperature
Authors:
Guanmei Wang,
Mark J. Raine,
Damian P. Hampshire
Abstract:
In this paper, we present data for two nanocrystalline YBa2Cu3O7-x (YBCO) samples which both exhibit Josephson-like Colossal Resistive Switching (JCRS) in voltage-current (V-I) traces from 4.2 K up to room temperature, in magnetic fields up to 8 T. We report Josephson-like hysteresis for both positive and negative current that has not been observed before in colossal resistive switching materials.…
▽ More
In this paper, we present data for two nanocrystalline YBa2Cu3O7-x (YBCO) samples which both exhibit Josephson-like Colossal Resistive Switching (JCRS) in voltage-current (V-I) traces from 4.2 K up to room temperature, in magnetic fields up to 8 T. We report Josephson-like hysteresis for both positive and negative current that has not been observed before in colossal resistive switching materials. Non-zero resistance was measured in transport measurements at all temperatures. At low temperatures (< 90 K), we also observed the usual properties for YBCO including weak superconducting and paramagnetic behavior, measured using ac susceptibility and magnetization measurements. The resistivity of these nanocrystalline samples is 3 orders of magnitude higher than standard polycrystalline materials at 300 K and the temperature dependence semiconductor-like. We cannot rule out the possibility that these materials contain a superconducting component responsible for the JCRS behavior at room temperature.
△ Less
Submitted 10 April, 2016; v1 submitted 31 January, 2016;
originally announced February 2016.
-
A derivation of Maxwell's equations using the Heaviside notation
Authors:
D. P. Hampshire
Abstract:
Maxwell's four differential equations describing electromagnetism are amongst the most famous equations in science. Feynman said that they provide four of the seven fundamental laws of classical physics. In this paper, we derive Maxwell's equations using a well-established approach for deriving time-dependent differential equations from static laws. The derivation uses the standard Heaviside notat…
▽ More
Maxwell's four differential equations describing electromagnetism are amongst the most famous equations in science. Feynman said that they provide four of the seven fundamental laws of classical physics. In this paper, we derive Maxwell's equations using a well-established approach for deriving time-dependent differential equations from static laws. The derivation uses the standard Heaviside notation. It assumes conservation of charge and that Coulomb's law of electrostatics and Ampere's law of magnetostatics are both correct as a function of time when they are limited to describing a local system. It is analogous to deriving the differential equation of motion for sound, assuming conservation of mass and that Hooke's static law of elasticity holds for a system in local equilibrium. We demonstrate that Faraday's law can be derived without any relativistic assumptions about Lorentz invariance and discuss creation of charge.
△ Less
Submitted 11 April, 2018; v1 submitted 7 October, 2015;
originally announced October 2015.
-
The Critical Current Density in Polycrystalline HTS and LTS Superconductors in High Magnetic Fields
Authors:
P. Sunwong,
J. S. Higgins,
Y. Tsui,
M. J. Raine,
D. P. Hampshire
Abstract:
Flux pinning scaling laws were developed to explain the observed increase in the critical current density Jc caused by increased density of grain boundaries in polycrystalline low temperature superconductors (LTS) such as Nb3Sn. For four decades they have provided the framework for the successful development of the LTS materials that carry high Jc in high magnetic fields. However, the discovery of…
▽ More
Flux pinning scaling laws were developed to explain the observed increase in the critical current density Jc caused by increased density of grain boundaries in polycrystalline low temperature superconductors (LTS) such as Nb3Sn. For four decades they have provided the framework for the successful development of the LTS materials that carry high Jc in high magnetic fields. However, the discovery of the weak-link problem suggested that transmission of supercurrent flow through the grain boundaries limited Jc in high temperature superconductors (HTS) such as YBa2Cu3O7-δ (YBCO). Here we provide evidence that a single mechanism - flux flow along grain boundaries - confirmed by time-dependent Ginzburg-Landau (TDGL) computational visualisation in LTS materials, explains the functional form of Jc in polycrystalline LTS Nb3Sn and HTS YBCO and (Bi,Pb)2Sr2Can-1CunOx (BiSCCO) materials in low and high magnetic fields. Data presented show that standard flux pinning theory cannot explain comprehensive Jc data for YBCO because Jc is a function of strain but the superconducting properties are not. We conclude that grain boundaries are narrow and metallic in Nb3Sn and YBCO but wide and semiconducting in BiSCCO. Strain alters Jc by changing the superconducting properties of the grains in Nb3Sn but by changing the grain boundaries in YBCO
△ Less
Submitted 24 November, 2013; v1 submitted 14 November, 2012;
originally announced November 2012.
-
The Critical Current Density of an SNS Josephson-Junction
Authors:
George J. Carty,
Damian P. Hampshire
Abstract:
The critical current density (Jc) through a superconductor in high magnetic fields is controlled by the inclusions and microstructure of the material that hold fluxons stationary to keep the resistance zero and is described using Ginzburg-Landau (G-L) theory. Although the functional form of Jc for superconducting-normal-superconducting (SNS) Josephson-Junctions (J-Js) is known in the low field lim…
▽ More
The critical current density (Jc) through a superconductor in high magnetic fields is controlled by the inclusions and microstructure of the material that hold fluxons stationary to keep the resistance zero and is described using Ginzburg-Landau (G-L) theory. Although the functional form of Jc for superconducting-normal-superconducting (SNS) Josephson-Junctions (J-Js) is known in the low field limit, includes the local properties of the junctions and has been confirmed experimentally in many systems, there are no general solutions for Jc of J-Js in high fields. Scaling laws describe the functional form (magnetic field, temperature and strain dependence) of Jc for polycrystalline superconductors in high fields but do not include local grain boundary properties. They are derived by considering isolated pinning sites where at criticality fluxons either depin or free fluxons shear past pinned fluxons as part of the flux line lattice. However, visualisation of solutions to the Time Dependent Ginzburg-Landau (TDGL) equations for polycrystalline materials have shown that fluxons cross the superconductor by flowing along the grain boundaries. Here we derive clean- and dirty- limit analytic equations for of SNS J-Js in high fields and verify them using computational solutions to TDGL theory. We consider SNS J-Js to be the basic building blocks for grain boundaries in polycrystalline materials since they provide flux-flow channels. The J-Js description provides a mathematical framework that includes the utility of scaling laws together with our microscopic understanding of barriers to supercurrent flow and helps identify the grain boundary engineering that can improve in low temperature polycrystalline superconductors used in high magnetic field applications.
△ Less
Submitted 24 November, 2013; v1 submitted 14 November, 2012;
originally announced November 2012.
