-
Frontier orbitals control dynamical disorder in molecular semiconductors
Authors:
Alexander Neef,
Sebastian Hammer,
Yuxuan Yao,
Shubham Sharma,
Samuel Beaulieu,
Shuo Dong,
Tommaso Pincelli,
Maximillian Frank,
Martin Wolf,
Mariana Rossi,
Harld Oberhofer,
Laurenz Rettig,
Jens Pflaum,
Ralph Ernstorfer
Abstract:
Charge transport in organic semiconductors is limited by dynamical disorder. Design rules for new high-mobility materials have therefore focused on limiting its two foundations: structural fluctuations and the transfer integral gradient. However, it has remained unclear how these goals should be translated into molecular structures. Here we show that a specific shape of the frontier orbital, with…
▽ More
Charge transport in organic semiconductors is limited by dynamical disorder. Design rules for new high-mobility materials have therefore focused on limiting its two foundations: structural fluctuations and the transfer integral gradient. However, it has remained unclear how these goals should be translated into molecular structures. Here we show that a specific shape of the frontier orbital, with a lack of nodes along the long molecular axis, reduces the transfer integral gradient and therefore the dynamical disorder. We investigated single crystals of the prototypical molecular semiconductors pentacene and picene by angle-resolved photoemission spectroscopy and dynamical disorder calculations. We found that picene exhibits a remarkably low dynamical disorder. By separating in- and out-of-plane components of dynamical disorder, we identify the reason as a reduced out-of-plane disorder from a small transfer integral derivative. Our results demonstrate that molecules with an armchair $π$-electron topology and same-phase frontier orbitals like picene are promising molecular building blocks for the next generation of organic semiconductors.
△ Less
Submitted 8 December, 2024;
originally announced December 2024.
-
A Joint Approach Towards Data-Driven Virtual Testing for Automated Driving: The AVEAS Project
Authors:
Leon Eisemann,
Mirjam Fehling-Kaschek,
Silke Forkert,
Andreas Forster,
Henrik Gommel,
Susanne Guenther,
Stephan Hammer,
David Hermann,
Marvin Klemp,
Benjamin Lickert,
Florian Luettner,
Robin Moss,
Nicole Neis,
Maria Pohle,
Dominik Schreiber,
Cathrina Sowa,
Daniel Stadler,
Janina Stompe,
Michael Strobelt,
David Unger,
Jens Ziehn
Abstract:
With growing complexity and responsibility of automated driving functions in road traffic and growing scope of their operational design domains, there is increasing demand for covering significant parts of development, validation, and verification via virtual environments and simulation models.
If, however, simulations are meant not only to augment real-world experiments, but to replace them, qu…
▽ More
With growing complexity and responsibility of automated driving functions in road traffic and growing scope of their operational design domains, there is increasing demand for covering significant parts of development, validation, and verification via virtual environments and simulation models.
If, however, simulations are meant not only to augment real-world experiments, but to replace them, quantitative approaches are required that measure to what degree and under which preconditions simulation models adequately represent reality, and thus allow their usage for virtual testing of driving functions. Especially in research and development areas related to the safety impacts of the "open world", there is a significant shortage of real-world data to parametrize and/or validate simulations - especially with respect to the behavior of human traffic participants, whom automated vehicles will meet in mixed traffic.
This paper presents the intermediate results of the German AVEAS research project (www.aveas.org) which aims at developing methods and metrics for the harmonized, systematic, and scalable acquisition of real-world data for virtual verification and validation of advanced driver assistance systems and automated driving, and establishing an online database following the FAIR principles.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Excimer Formation in Zinc-phthalocyanine Revealed using Ultrafast Electron Diffraction
Authors:
Sebastian Hammer,
Tristan L. Britt,
Laurenz Kremeyer,
Maximilian Rödel,
David Cai,
Jens Pflaum,
Bradley Siwick
Abstract:
The formation of excited dimer states, so called excimers, is an important phenomenon in many organic molecular semiconductors. In contrast to Frenkel exciton-polaron excited states, an excimer is long-lived and energetically low-lying due to stabilization resulting from a substantial reorganization of the inter-molecular geometry. In this letter, we show that ultrafast electron diffraction can fo…
▽ More
The formation of excited dimer states, so called excimers, is an important phenomenon in many organic molecular semiconductors. In contrast to Frenkel exciton-polaron excited states, an excimer is long-lived and energetically low-lying due to stabilization resulting from a substantial reorganization of the inter-molecular geometry. In this letter, we show that ultrafast electron diffraction can follow the dynamics of solid-state excimer formation in polycrystalline thin films of a molecular semiconductor, revealing both the key reaction modes and the eventual structure of the emitting state. We study the prototypical organic semiconductor zinc-phthalocyanine (ZnPc) in its crystallographic $α$-phase as a model excimeric system. We show, that the excimer forms in a two-step process starting with a fast dimerization ($\lesssim 0.4\, \text{ps}$) followed by a subsequent slow shear-twist motion ($14\, \text{ps}$) leading to an alignment of the $π$-systems of the involved monomers. Furthermore, we show that while the same excimer geomtry is present in partially fluorinated derivatives of ZnPc, the formation kinematics slow down with increasing level of fluorination.
△ Less
Submitted 28 April, 2024;
originally announced April 2024.
-
Large Scale Generative AI Text Applied to Sports and Music
Authors:
Aaron Baughman,
Stephen Hammer,
Rahul Agarwal,
Gozde Akay,
Eduardo Morales,
Tony Johnson,
Leonid Karlinsky,
Rogerio Feris
Abstract:
We address the problem of scaling up the production of media content, including commentary and personalized news stories, for large-scale sports and music events worldwide. Our approach relies on generative AI models to transform a large volume of multimodal data (e.g., videos, articles, real-time scoring feeds, statistics, and fact sheets) into coherent and fluent text. Based on this approach, we…
▽ More
We address the problem of scaling up the production of media content, including commentary and personalized news stories, for large-scale sports and music events worldwide. Our approach relies on generative AI models to transform a large volume of multimodal data (e.g., videos, articles, real-time scoring feeds, statistics, and fact sheets) into coherent and fluent text. Based on this approach, we introduce, for the first time, an AI commentary system, which was deployed to produce automated narrations for highlight packages at the 2023 US Open, Wimbledon, and Masters tournaments. In the same vein, our solution was extended to create personalized content for ESPN Fantasy Football and stories about music artists for the Grammy awards. These applications were built using a common software architecture achieved a 15x speed improvement with an average Rouge-L of 82.00 and perplexity of 6.6. Our work was successfully deployed at the aforementioned events, supporting 90 million fans around the world with 8 billion page views, continuously pushing the bounds on what is possible at the intersection of sports, entertainment, and AI.
△ Less
Submitted 27 February, 2024; v1 submitted 31 January, 2024;
originally announced February 2024.
-
Surface doping of rubrene single crystals by molecular electron donors and acceptors
Authors:
Christos Gatsios,
Andreas Opitz,
Dominique Lungwitz,
Ahmed E. Mansour,
Thorsten Schultz,
Dongguen Shin,
Sebastian Hammer,
Jens Pflaum,
Yadong Zhang,
Stephen Barlow,
Seth R. Marder,
Norbert Koch
Abstract:
The surface molecular doping of organic semiconductors can play an important role in the development of organic electronic or optoelectronic devices. Single-crystal rubrene remains a leading molecular candidate for applications in electronics due to its high hole mobility. In parallel, intensive research into the fabrication of flexible organic electronics requires the careful design of functional…
▽ More
The surface molecular doping of organic semiconductors can play an important role in the development of organic electronic or optoelectronic devices. Single-crystal rubrene remains a leading molecular candidate for applications in electronics due to its high hole mobility. In parallel, intensive research into the fabrication of flexible organic electronics requires the careful design of functional interfaces to enable optimal device characteristics. To this end, the present work seeks to understand the effect of surface molecular doping on the electronic band structure of rubrene single crystals. Our angle-resolved photoemission measurements reveal that the Fermi level moves in the band gap of rubrene depending on the direction of surface electron-transfer reactions with the molecular dopants, yet the valence band dispersion remains essentially unperturbed. This indicates that surface electron-transfer doping of a molecular single crystal can effectively modify the near-surface charge density, while retaining good charge-carrier mobility.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Spectroscopic analysis of vibrational coupling in multi-molecular excited states
Authors:
Sebastian Hammer,
Theresa Linderl,
Kristofer Tvingstedt,
Wolfgang Brütting,
Jens Pflaum
Abstract:
Multi-molecular excited states accompanied by an intra- and inter-molecular geometric relaxation are commonly encountered in optical and electrooptical studies and applications of organic semiconductors as, for example excimers or charge transfer states. Understanding the dynamics of these states is crucial to improve organic devices such as light emitting diodes and solar cells. Their full micros…
▽ More
Multi-molecular excited states accompanied by an intra- and inter-molecular geometric relaxation are commonly encountered in optical and electrooptical studies and applications of organic semiconductors as, for example excimers or charge transfer states. Understanding the dynamics of these states is crucial to improve organic devices such as light emitting diodes and solar cells. Their full microscopic description, however, demands for sophisticated tools such as ab-initio quantum chemical calculations which come at the expenses of high computational costs and are prone to errors by assumptions as well as iterative algorithmic procedures. Hence, the analysis of spectroscopic data is often conducted on a phenomenological level only. Here, we present a toolkit to analyze temperature dependent luminescence data and gain first insights into the relevant microscopic parameters of the molecular system at hand. By means of a Franck-Condon based approach considering a single effective inter-molecular vibrational mode and different potentials for the ground and excited state we are able to explain the luminescence spectra of such multi-molecular states. We demonstrate that by applying certain reasonable simplifications the luminescence of charge transfer states as well as excimers can be satisfactorily reproduced for temperatures ranging from cryogenics to above room temperature. We present a semi-classical and a quantum-mechanical description of our model and, for both cases, demonstrate its applicability by analyzing the temperature depended luminescence of the amorphous donor-acceptor heterojunction tetraphenyldibenzoperiflanthene:C$_{60}$ as well as polycrystalline zinc-phthalocyanine to reproduce the luminescence spectra and extract relevant system parameters such as the excimer binding energy.
△ Less
Submitted 3 July, 2022;
originally announced July 2022.
-
Microscopic 3D printed optical tweezers for atomic quantum technology
Authors:
Pavel Ruchka,
Sina Hammer,
Marian Rockenhäuser,
Ralf Albrecht,
Johannes Drozella,
Simon Thiele,
Harald Giessen,
Tim Langen
Abstract:
Trapping of single ultracold atoms is an important tool for applications ranging from quantum computation and communication to sensing. However, most experimental setups, while very precise and versatile, can only be operated in specialized laboratory environments due to their large size, complexity and high cost. Here, we introduce a new trapping concept for ultracold atoms in optical tweezers ba…
▽ More
Trapping of single ultracold atoms is an important tool for applications ranging from quantum computation and communication to sensing. However, most experimental setups, while very precise and versatile, can only be operated in specialized laboratory environments due to their large size, complexity and high cost. Here, we introduce a new trapping concept for ultracold atoms in optical tweezers based on micrometer-scale lenses that are 3D printed onto the tip of standard optical fibers. The unique properties of these lenses make them suitable for both trapping individual atoms and capturing their fluorescence with high efficiency. In an exploratory experiment, we have established the vacuum compatibility and robustness of the structures, and successfully formed a magneto-optical trap for ultracold atoms in their immediate vicinity. This makes them promising components for portable atomic quantum devices.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
Comparing Wiener, Szeged and revised Szeged index on cactus graphs
Authors:
Stefan Hammer
Abstract:
We show that on cactus graphs the Szeged index is bounded above by twice the Wiener index. For the revised Szeged index the situation is reversed if the graph class is further restricted. Namely, if all blocks of a cactus graph are cycles, then its revised Szeged index is bounded below by twice its Wiener index. Additionally, we show that these bounds are sharp and examine the cases of equality. A…
▽ More
We show that on cactus graphs the Szeged index is bounded above by twice the Wiener index. For the revised Szeged index the situation is reversed if the graph class is further restricted. Namely, if all blocks of a cactus graph are cycles, then its revised Szeged index is bounded below by twice its Wiener index. Additionally, we show that these bounds are sharp and examine the cases of equality. Along the way, we provide a formulation of the revised Szeged index as a sum over vertices, which proves very helpful, and may be interesting in other contexts.
△ Less
Submitted 14 November, 2022; v1 submitted 29 April, 2022;
originally announced April 2022.
-
Orbital-resolved Observation of Singlet Fission
Authors:
Alexander Neef,
Samuel Beaulieu,
Sebastian Hammer,
Shuo Dong,
Julian Maklar,
Tommaso Pincelli,
R. Patrick Xian,
Martin Wolf,
Laurenz Rettig,
Jens Pflaum,
Ralph Ernstorfer
Abstract:
Singlet fission may boost photovoltaic efficiency [by transforming a singlet exciton into two triplet excitons and thereby doubling the number of excited charge carriers. The primary step of singlet fission is the ultrafast creation of the correlated triplet pair. While several mechanisms have been proposed to explain this step, none has emerged as a consensus. The challenge lies in tracking the t…
▽ More
Singlet fission may boost photovoltaic efficiency [by transforming a singlet exciton into two triplet excitons and thereby doubling the number of excited charge carriers. The primary step of singlet fission is the ultrafast creation of the correlated triplet pair. While several mechanisms have been proposed to explain this step, none has emerged as a consensus. The challenge lies in tracking the transient excitonic states. Here we use time- and angle-resolved photoemission spectroscopy to observe the primary step of singlet fission in crystalline pentacene. Our results suggest a charge-transfer mediated mechanism with a hybridization of Frenkel and charge-transfer states in the lowest bright singlet exciton. We gained intimate knowledge about the localization and the orbital character of the exciton wave functions recorded in momentum maps. This allowed us to directly compare the localization of singlet and bitriplet excitons and decompose energetically overlapping states based on their orbital character. Orbital- and localization- resolved many-body dynamics promise deep insights into the mechanics governing molecular systems and topological materials.
△ Less
Submitted 28 February, 2023; v1 submitted 14 April, 2022;
originally announced April 2022.
-
Photoexcitation of $^{76}$Ge
Authors:
R. Schwengner,
R. Massarczyk,
K. Schmidt,
K. Zuber,
R. Beyer,
D. Bemmerer,
S. Hammer,
A. Hartmann,
T. Hensel,
H. F. Hoffmann,
A. R. Junghans,
T. Kögler,
S. E. Müller,
M. Pichotta,
S. Turkat,
J. A. B. Turko,
S. Urlaß,
A. Wagner
Abstract:
The dipole strength of the nuclide $^{76}$Ge was studied in photon-scattering experiments using bremsstrahlung produced with electron beams of energies of 7.8 and 12.3 MeV at the $γ$ELBE facility. We identified 210 levels up to an excitation energy of 9.4 MeV and assigned spin $J$ = 1 to most of them. The quasicontinuum of unresolved transitions was included in the analysis of the spectra and the…
▽ More
The dipole strength of the nuclide $^{76}$Ge was studied in photon-scattering experiments using bremsstrahlung produced with electron beams of energies of 7.8 and 12.3 MeV at the $γ$ELBE facility. We identified 210 levels up to an excitation energy of 9.4 MeV and assigned spin $J$ = 1 to most of them. The quasicontinuum of unresolved transitions was included in the analysis of the spectra and the intensities of branching transitions were estimated on the basis of simulations of statistical $γ$-ray cascades. The photoabsorption cross section up to the neutron-separation energy was determined and is compared with predictions of the statistical reaction model. The derived photon strength function is compared with results of experiments using other reactions.
△ Less
Submitted 24 September, 2021; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Measurement of the $^{2}$H($p,γ$)$^{3}$He S-factor at 265-1094keV
Authors:
S. Turkat,
S. Hammer,
E. Masha,
S. Akhmadaliev,
D. Bemmerer,
M. Grieger,
T. Hensel,
J. Julin,
M. Koppitz,
F. Ludwig,
C. Möckel,
S. Reinicke,
R. Schwengner,
K. Stöckel,
T. Szücs,
L. Wagner,
K. Zuber
Abstract:
Recent astronomical data have provided the primordial deuterium abundance with percent precision. As a result, Big Bang nucleosynthesis may provide a constraint on the universal baryon to photon ratio that is as precise as, but independent from, analyses of the cosmic microwave background. However, such a constraint requires that the nuclear reaction rates governing the production and destruction…
▽ More
Recent astronomical data have provided the primordial deuterium abundance with percent precision. As a result, Big Bang nucleosynthesis may provide a constraint on the universal baryon to photon ratio that is as precise as, but independent from, analyses of the cosmic microwave background. However, such a constraint requires that the nuclear reaction rates governing the production and destruction of primordial deuterium are sufficiently well known. Here, a new measurement of the $^2$H($p,γ$)$^3$He cross section is reported. This nuclear reaction dominates the error on the predicted Big Bang deuterium abundance. A proton beam of 400-1650keV beam energy was incident on solid titanium deuteride targets, and the emitted $γ$-rays were detected in two high-purity germanium detectors at angles of 55$^\circ$ and 90$^\circ$, respectively. The deuterium content of the targets has been obtained in situ by the $^2$H($^3$He,$p$)$^4$He reaction and offline using the Elastic Recoil Detection method. The astrophysical S-factor has been determined at center of mass energies between 265 and 1094 keV, addressing the uppermost part of the relevant energy range for Big Bang nucleosynthesis and complementary to ongoing work at lower energies. The new data support a higher S-factor at Big Bang temperatures than previously assumed, reducing the predicted deuterium abundance.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Nuclear dynamics of singlet exciton fission: a direct observation in pentacene single crystals
Authors:
Hélène Seiler,
Marcin Krynski,
Daniela Zahn,
Sebastian Hammer,
Yoav William Windsor,
Thomas Vasileiadis,
Jens Pflaum,
Ralph Ernstorfer,
Mariana Rossi,
Heinrich Schwoerer
Abstract:
Singlet exciton fission (SEF) is a key process in the development of efficient opto-electronic devices. An aspect that is rarely probed directly, and yet has a tremendous impact on SEF properties, is the nuclear structure and dynamics involved in this process. Here we directly observe the nuclear dynamics accompanying the SEF process in single crystal pentacene using femtosecond electron diffracti…
▽ More
Singlet exciton fission (SEF) is a key process in the development of efficient opto-electronic devices. An aspect that is rarely probed directly, and yet has a tremendous impact on SEF properties, is the nuclear structure and dynamics involved in this process. Here we directly observe the nuclear dynamics accompanying the SEF process in single crystal pentacene using femtosecond electron diffraction. The data reveal coherent atomic motions at 1 THz, incoherent motions, and an anisotropic lattice distortion representing the polaronic character of the triplet excitons. Combining molecular dynamics simulations, time-dependent density functional theory and experimental structure factor analysis, the coherent motions are identified as collective sliding motions of the pentacene molecules along their long axis. Such motions modify the excitonic coupling between adjacent molecules. Our findings reveal that long-range motions play a decisive part in the disintegration of the electronically correlated triplet pairs, and shed light on why SEF occurs on ultrafast timescales.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
Evolving methods for rational de novo design of functional RNA molecules
Authors:
Stefan Hammer,
Christian Günzel,
Mario Mörl,
Sven Findeiß
Abstract:
Artificial RNA molecules with novel functionality have many applications in synthetic biology, pharmacy and white biotechnology. The de novo design of such devices using computational methods and prediction tools is a resource-efficient alternative to experimental screening and selection pipelines. In this review, we describe methods common to many such computational approaches, thoroughly dissect…
▽ More
Artificial RNA molecules with novel functionality have many applications in synthetic biology, pharmacy and white biotechnology. The de novo design of such devices using computational methods and prediction tools is a resource-efficient alternative to experimental screening and selection pipelines. In this review, we describe methods common to many such computational approaches, thoroughly dissect these methods and highlight open questions for the individual steps. Initially, it is essential to investigate the biological target system, the regulatory mechanism that will be exploited, as well as the desired components in order to define design objectives. Subsequent computational design is needed to combine the selected components and to obtain novel functionality. This process can usually be split into constrained sequence sampling, the formulation of an optimization problem and an in silico analysis to narrow down the number of candidates with respect to secondary goals. Finally, experimental analysis is important to check whether the defined design objectives are indeed met in the target environment and detailed characterization experiments should be performed to improve the mechanistic models and detect missing design requirements.
△ Less
Submitted 10 May, 2019; v1 submitted 4 February, 2019;
originally announced February 2019.
-
Simulating the impact of the Smith Cloud
Authors:
C. Alig,
S. Hammer,
N. Borodatchenkova,
C. L. Dobbs,
A. Burkert
Abstract:
We investigate the future evolution of the Smith Cloud by performing hydrodynamical simulations of the cloud impact onto the gaseous Milky Way Galactic disk. We assume a local origin for the cloud and thus do not include a dark matter component to stabilize it. Our main focus is the cloud's influence on the local and global star formation rate (SFR) of the Galaxy and whether or not it leads to an…
▽ More
We investigate the future evolution of the Smith Cloud by performing hydrodynamical simulations of the cloud impact onto the gaseous Milky Way Galactic disk. We assume a local origin for the cloud and thus do not include a dark matter component to stabilize it. Our main focus is the cloud's influence on the local and global star formation rate (SFR) of the Galaxy and whether or not it leads to an observable event in the far future. Our model assumes two extremes for the mass of the Smith Cloud, an upper mass limit of 10$^7$ M$_{\odot}$ and a lower mass limit of 10$^6$ M$_{\odot}$, compared to the observational value of a few 10$^6$ M$_{\odot}$. In addition, we also make the conservative assumption that the entirety of the cloud mass of the extended Smith Cloud is concentrated within the tip of the cloud. We find that the impact of the low-mass cloud produces no noticeable change in neither the global SFR nor the local SFR at the cloud impact site within the galactic disk. For the high-mass cloud we find a short-term (roughly 5 Myr) increase of the global SFR of up to 1 M$_{\odot}$ yr$^{-1}$, which nearly doubles the normal Milky Way SFR. This highly localized starburst should be observable.
△ Less
Submitted 6 January, 2019;
originally announced January 2019.
-
The new Felsenkeller 5 MV underground accelerator
Authors:
Daniel Bemmerer,
Thomas E. Cowan,
Alexander Domula,
Toralf Döring,
Marcel Grieger,
Sebastian Hammer,
Thomas Hensel,
Lisa Hübinger,
Arnd R. Junghans,
Felix Ludwig,
Stefan E. Müller,
Stefan Reinicke,
Bernd Rimarzig,
Konrad Schmidt,
Ronald Schwengner,
Klaus Stöckel,
Tamás Szücs,
Steffen Turkat,
Andreas Wagner,
Louis Wagner,
Kai Zuber
Abstract:
The field of nuclear astrophysics is devoted to the study of the creation of the chemical elements. By nature, it is deeply intertwined with the physics of the Sun. The nuclear reactions of the proton-proton cycle of hydrogen burning, including the 3He(α,γ)7Be reaction, provide the necessary nuclear energy to prevent the gravitational collapse of the Sun and give rise to the by now well-studied pp…
▽ More
The field of nuclear astrophysics is devoted to the study of the creation of the chemical elements. By nature, it is deeply intertwined with the physics of the Sun. The nuclear reactions of the proton-proton cycle of hydrogen burning, including the 3He(α,γ)7Be reaction, provide the necessary nuclear energy to prevent the gravitational collapse of the Sun and give rise to the by now well-studied pp, 7Be, and 8B solar neutrinos. The not yet measured flux of 13N, 15O, and 17F neutrinos from the carbon-nitrogen-oxygen cycle is affected in rate by the 14N(p,γ)15O reaction and in emission profile by the 12C(p,γ)13N reaction. The nucleosynthetic output of the subsequent phase in stellar evolution, helium burning, is controlled by the 12C(α,γ)16O reaction.
In order to properly interpret the existing and upcoming solar neutrino data, precise nuclear physics information is needed. For nuclear reactions between light, stable nuclei, the best available technique are experiments with small ion accelerators in underground, low-background settings. The pioneering work in this regard has been done by the LUNA collaboration at Gran Sasso/Italy, using a 0.4 MV accelerator.
The present contribution reports on a higher-energy, 5.0 MV, underground accelerator in the Felsenkeller underground site in Dresden/Germany. Results from γ-ray, neutron, and muon background measurements in the Felsenkeller underground site in Dresden, Germany, show that the background conditions are satisfactory for nuclear astrophysics purposes. The accelerator is in the commissioning phase and will provide intense, up to 50μA, beams of 1H+, 4He+ , and 12C+ ions, enabling research on astrophysically relevant nuclear reactions with unprecedented sensitivity.
△ Less
Submitted 14 November, 2018; v1 submitted 18 October, 2018;
originally announced October 2018.
-
Fixed-Parameter Tractable Sampling for RNA Design with Multiple Target Structures
Authors:
Stefan Hammer,
Yann Ponty,
Wei Wang,
Sebastian Will
Abstract:
The design of multi-stable RNA molecules has important applications in biology, medicine, and biotechnology. Synthetic design approaches profit strongly from effective in-silico methods, which can tremendously impact their cost and feasibility. We revisit a central ingredient of most in-silico design methods: the sampling of sequences for the design of multi-target structures, possibly including p…
▽ More
The design of multi-stable RNA molecules has important applications in biology, medicine, and biotechnology. Synthetic design approaches profit strongly from effective in-silico methods, which can tremendously impact their cost and feasibility. We revisit a central ingredient of most in-silico design methods: the sampling of sequences for the design of multi-target structures, possibly including pseudoknots. For this task, we present the efficient, tree decomposition-based algorithm. Our fixed parameter tractable approach is underpinned by establishing the P-hardness of uniform sampling. Modeling the problem as a constraint network, our program supports generic Boltzmann-weighted sampling for arbitrary additive RNA energy models; this enables the generation of RNA sequences meeting specific goals like expected free energies or \GCb-content. Finally, we empirically study general properties of the approach and generate biologically relevant multi-target Boltzmann-weighted designs for a common design benchmark. Generating seed sequences with our program, we demonstrate significant improvements over the previously best multi-target sampling strategy (uniform sampling).Our software is freely available at: https://github.com/yannponty/RNARedPrint .
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Automatic Curation of Golf Highlights using Multimodal Excitement Features
Authors:
Michele Merler,
Dhiraj Joshi,
Quoc-Bao Nguyen,
Stephen Hammer,
John Kent,
John R. Smith,
Rogerio S. Feris
Abstract:
The production of sports highlight packages summarizing a game's most exciting moments is an essential task for broadcast media. Yet, it requires labor-intensive video editing. We propose a novel approach for auto-curating sports highlights, and use it to create a real-world system for the editorial aid of golf highlight reels. Our method fuses information from the players' reactions (action recog…
▽ More
The production of sports highlight packages summarizing a game's most exciting moments is an essential task for broadcast media. Yet, it requires labor-intensive video editing. We propose a novel approach for auto-curating sports highlights, and use it to create a real-world system for the editorial aid of golf highlight reels. Our method fuses information from the players' reactions (action recognition such as high-fives and fist pumps), spectators (crowd cheering), and commentator (tone of the voice and word analysis) to determine the most interesting moments of a game. We accurately identify the start and end frames of key shot highlights with additional metadata, such as the player's name and the hole number, allowing personalized content summarization and retrieval. In addition, we introduce new techniques for learning our classifiers with reduced manual training data annotation by exploiting the correlation of different modalities. Our work has been demonstrated at a major golf tournament, successfully extracting highlights from live video streams over four consecutive days.
△ Less
Submitted 21 July, 2017;
originally announced July 2017.
-
Scalable Transfer-Free Fabrication of MoS$_2$/SiO$_2$ Hybrid Nanophotonic Cavity Arrays with Quality Factors Exceeding 4000
Authors:
Sebastian Hammer,
Hans-Moritz Mangold,
Ariana E. Nguyen,
Dominic Martinez-Ta,
Sahar Naghibi Alvillar,
Ludwig Bartels,
Hubert J. Krenner
Abstract:
We report the fully-scalable fabrication of a large array of hybrid molybdenum disulfide (MoS$_2$) - silicon dioxide (SiO$_2$) one-dimensional, free-standing photonic-crystal cavities capable of enhancement of the MoS$_2$ photoluminescence at the narrow cavity resonance. We demonstrate continuous tunability of the cavity resonance wavelength across the entire emission band of MoS$_2$ simply by var…
▽ More
We report the fully-scalable fabrication of a large array of hybrid molybdenum disulfide (MoS$_2$) - silicon dioxide (SiO$_2$) one-dimensional, free-standing photonic-crystal cavities capable of enhancement of the MoS$_2$ photoluminescence at the narrow cavity resonance. We demonstrate continuous tunability of the cavity resonance wavelength across the entire emission band of MoS$_2$ simply by variation of the photonic crystal periodicity. Device fabrication started by substrate-scale growth of MoS$_2$ using chemical vapor deposition (CVD) on non-birefringent thermal oxide on a silicon wafer; it was followed by lithographic fabrication of a photon crystal nanocavity array on the same substrate at more than 50% yield of functional devices. Our cavities exhibit three dominant modes with measured linewidths less than 0.2 nm, corresponding to quality factors exceeding 4000. All experimental findings are found to be in excellent agreement with finite difference time domain simulations.
△ Less
Submitted 28 June, 2017;
originally announced June 2017.
-
Effect of doping of zinc oxide on the hole mobility of poly(3-hexylthiophene) in hybrid transistors
Authors:
Maria S. Hammer,
Carsten Deibel,
Jens Pflaum,
Vladimir Dyakonov
Abstract:
Hybrid field effect transistors based on the organic polymer poly(3-hexylthiophene) (P3HT) and inorganic zinc oxide were investigated. In this report we present one of the first studies on hybrid transistors employing one polymeric transport layer. The sol-gel processed ZnO was modified via Al doping between 0.8 and 10 at.%, which allows a systematic variation of the zinc oxide properties, i.e. el…
▽ More
Hybrid field effect transistors based on the organic polymer poly(3-hexylthiophene) (P3HT) and inorganic zinc oxide were investigated. In this report we present one of the first studies on hybrid transistors employing one polymeric transport layer. The sol-gel processed ZnO was modified via Al doping between 0.8 and 10 at.%, which allows a systematic variation of the zinc oxide properties, i.e. electron mobility and morphology. With increasing doping level we observe on the one hand a decrease of the electron mobilities by two orders of magnitude,on the other hand doping enforces a morphological change of the zinc oxide layer which enables the infiltration of P3HT into the inorganic matrix. X-ray reflectivity (XRR) measurements confirm this significant change in the interface morphology for the various doping levels. We demonstrate that doping of ZnO is a tool to adjust the charge transport in ZnO/P3HT hybrids, using one single injecting metal (Au bottom contact) on a SiO2 dielectric. We observe an influence of the zinc oxide layer on the hole mobility in P3HT which we can modify via Al doping of ZnO. Hence, maximum hole mobility of 5e-4 cm^2/Vs in the hybrid system with 2 at.% Al doping. 5 at.% Al doping leads to a balanced mobility in the organic/inorganic hybrid system but also to a small on/off ratio due to high off-currents.
△ Less
Submitted 25 June, 2010;
originally announced June 2010.
-
Improvement of the poly-3-hexylthiophene transistor performance using small molecule contact functionalization
Authors:
Rebecca Winter,
Maria S Hammer,
Carsten Deibel,
Jens Pflaum
Abstract:
We demonstrate an approach to improve poly-3-hexylthiophene field effect transistors by modifying the gold contacts with monolayer thick pentacenequinone (PQ) or naphthalene (NL). The effective contact resistance is reduced by a factor of two and sixteen for interlayers of PQ and NL, respectively. The observation is attributed to different injection barriers at the metal-organic interface caused…
▽ More
We demonstrate an approach to improve poly-3-hexylthiophene field effect transistors by modifying the gold contacts with monolayer thick pentacenequinone (PQ) or naphthalene (NL). The effective contact resistance is reduced by a factor of two and sixteen for interlayers of PQ and NL, respectively. The observation is attributed to different injection barriers at the metal-organic interface caused by the functionalization and to an additional tunneling barrier enhancing the on/off ratios. This barrier yields to activation energies of 37meV (NL) and 104meV (PQ) below 190K, which are smaller than without functionalization, 117meV.
△ Less
Submitted 7 December, 2009;
originally announced December 2009.
-
Effect of doping-- and field--induced charge carrier density on the electron transport in nanocrystalline ZnO
Authors:
Maria S Hammer,
Daniel Rauh,
Carsten Deibel,
Vladimir Dyakonov
Abstract:
Charge transport properties of thin films of sol--gel processed undoped and Al-doped zinc oxide nanoparticles with variable doping level between 0.8 at% and 10 at% were investigated. The X-ray diffraction studies revealed a decrease of the average crystallite sizes in highly doped samples. We provide estimates of the conductivity and the resulting charge carrier densities with respect to the dop…
▽ More
Charge transport properties of thin films of sol--gel processed undoped and Al-doped zinc oxide nanoparticles with variable doping level between 0.8 at% and 10 at% were investigated. The X-ray diffraction studies revealed a decrease of the average crystallite sizes in highly doped samples. We provide estimates of the conductivity and the resulting charge carrier densities with respect to the doping level. The increase of charge carrier density due to extrinsic doping were compared to the accumulation of charge carriers in field effect transistor structures. This allowed to assess the scattering effects due to extrinsic doping on the electron mobility. The latter decreases from 4.6*10^-3 cm^2/Vs to 4.5*10^-4 cm^2/Vs with increasing doping density. In contrast, the accumulation leads to an increasing mobility up to 1.5*10^-2 cm^2/Vs. The potential barrier heights related to grain boundaries between the crystallites were derived from temperature dependent mobility measurements. The extrinsic doping initially leads to a grain boundary barrier height lowering, followed by an increase due to doping-induced structural defects. We conclude that the conductivity of sol--gel processed nanocrystalline ZnO:Al is governed by an interplay of the enhanced charge carrier density and the doping-induced charge carrier scattering effects, achieving a maximum at 0.8 at% in our case.
△ Less
Submitted 12 November, 2008;
originally announced November 2008.
