-
The transformative capability of quantum-accurate machine learning interatomic potentials
Authors:
Alfredo A. Correa,
Sebastien Hamel
Abstract:
Many materials's properties and phase boundaries are generally not well known under extreme pressure and temperature conditions. This is a consequence of the scarcity of experimental information and the difficulty of extrapolating approximations to the atomic interactions in such conditions. Nguyen-Cong and colleagues, in their publication (J.Phys.Chem.Lett. 15, 1152 (2024)), achieved an impressiv…
▽ More
Many materials's properties and phase boundaries are generally not well known under extreme pressure and temperature conditions. This is a consequence of the scarcity of experimental information and the difficulty of extrapolating approximations to the atomic interactions in such conditions. Nguyen-Cong and colleagues, in their publication (J.Phys.Chem.Lett. 15, 1152 (2024)), achieved an impressive result using a SNAP (Spectral Neighbor Analysis Potential), an interatomic potential for carbon obtained by machine learning techniques. In a way, their contribution closes a full circle of research that spanned more than three decades.
△ Less
Submitted 2 June, 2025;
originally announced June 2025.
-
Roadmap for warm dense matter physics
Authors:
Jan Vorberger,
Frank Graziani,
David Riley,
Andrew D. Baczewski,
Isabelle Baraffe,
Mandy Bethkenhagen,
Simon Blouin,
Maximilian P. Böhme,
Michael Bonitz,
Michael Bussmann,
Alexis Casner,
Witold Cayzac,
Peter Celliers,
Gilles Chabrier,
Nicolas Chamel,
Dave Chapman,
Mohan Chen,
Jean Clérouin,
Gilbert Collins,
Federica Coppari,
Tilo Döppner,
Tobias Dornheim,
Luke B. Fletcher,
Dirk O. Gericke,
Siegfried Glenzer
, et al. (49 additional authors not shown)
Abstract:
This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technolog…
▽ More
This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.
△ Less
Submitted 5 May, 2025;
originally announced May 2025.
-
Model-free Rayleigh weight from x-ray Thomson scattering measurements
Authors:
Tobias Dornheim,
Hannah M. Bellenbaum,
Mandy Bethkenhagen,
Stephanie B. Hansen,
Maximilian P. Böhme,
Tilo Döppner,
Luke B. Fletcher,
Thomas Gawne,
Dirk O. Gericke,
Sebastien Hamel,
Dominik Kraus,
Michael J. MacDonald,
Zhandos A. Moldabekov,
Thomas R. Preston,
Ronald Redmer,
Maximilian Schörner,
Sebastian Schwalbe,
Panagiotis Tolias,
Jan Vorberger
Abstract:
X-ray Thomson scattering (XRTS) has emerged as a powerful tool for the diagnostics of matter under extreme conditions. In principle, it gives one access to important system parameters such as the temperature, density, and ionization state, but the interpretation of the measured XRTS intensity usually relies on theoretical models and approximations. In this work, we show that it is possible to extr…
▽ More
X-ray Thomson scattering (XRTS) has emerged as a powerful tool for the diagnostics of matter under extreme conditions. In principle, it gives one access to important system parameters such as the temperature, density, and ionization state, but the interpretation of the measured XRTS intensity usually relies on theoretical models and approximations. In this work, we show that it is possible to extract the Rayleigh weight -- a key property that describes the electronic localization around the ions -- directly from the experimental data without the need for any model calculations or simulations. As a practical application, we consider an experimental measurement of strongly compressed Be at the National Ignition Facility (NIF) [Döppner \emph{et al.}, \textit{Nature} \textbf{618}, 270-275 (2023)]. In addition to being interesting in their own right, our results will open up new avenues for diagnostics from \emph{ab initio} simulations, help to further constrain existing chemical models, and constitute a rigorous benchmark for theory and simulations.
△ Less
Submitted 6 April, 2025; v1 submitted 13 September, 2024;
originally announced September 2024.
-
Ice phase classification made easy with score-based denoising
Authors:
Hong Sun,
Sebastien Hamel,
Tim Hsu,
Babak Sadigh,
Vince Lordi,
Fei Zhou
Abstract:
Accurate identification of ice phases is essential for understanding various physicochemical phenomena. However, such classification for structures simulated with molecular dynamics is complicated by the complex symmetries of ice polymorphs and thermal fluctuations. For this purpose, both traditional order parameters and data-driven machine learning approaches have been employed, but they often re…
▽ More
Accurate identification of ice phases is essential for understanding various physicochemical phenomena. However, such classification for structures simulated with molecular dynamics is complicated by the complex symmetries of ice polymorphs and thermal fluctuations. For this purpose, both traditional order parameters and data-driven machine learning approaches have been employed, but they often rely on expert intuition, specific geometric information, or large training datasets. In this work, we present an unsupervised phase classification framework that combines a score-based denoiser model with a subsequent model-free classification method to accurately identify ice phases. The denoiser model is trained on perturbed synthetic data of ideal reference structures, eliminating the need for large datasets and labeling efforts. The classification step utilizes the Smooth Overlap of Atomic Positions (SOAP) descriptors as the atomic fingerprint, ensuring Euclidean symmetries and transferability to various structural systems. Our approach achieves a remarkable 100\% accuracy in distinguishing ice phases of test trajectories using only seven ideal reference structures of ice phases as model inputs. This demonstrates the generalizability of the score-based denoiser model in facilitating phase identification for complex molecular systems. The proposed classification strategy can be broadly applied to investigate structural evolution and phase identification for a wide range of materials, offering new insights into the fundamental understanding of water and other complex systems.
△ Less
Submitted 11 July, 2024; v1 submitted 10 May, 2024;
originally announced May 2024.
-
Model-free quantification of completeness, uncertainties, and outliers in atomistic machine learning using information theory
Authors:
Daniel Schwalbe-Koda,
Sebastien Hamel,
Babak Sadigh,
Fei Zhou,
Vincenzo Lordi
Abstract:
An accurate description of information is relevant for a range of problems in atomistic machine learning (ML), such as crafting training sets, performing uncertainty quantification (UQ), or extracting physical insights from large datasets. However, atomistic ML often relies on unsupervised learning or model predictions to analyze information contents from simulation or training data. Here, we intr…
▽ More
An accurate description of information is relevant for a range of problems in atomistic machine learning (ML), such as crafting training sets, performing uncertainty quantification (UQ), or extracting physical insights from large datasets. However, atomistic ML often relies on unsupervised learning or model predictions to analyze information contents from simulation or training data. Here, we introduce a theoretical framework that provides a rigorous, model-free tool to quantify information contents in atomistic simulations. We demonstrate that the information entropy of a distribution of atom-centered environments explains known heuristics in ML potential developments, from training set sizes to dataset optimality. Using this tool, we propose a model-free UQ method that reliably predicts epistemic uncertainty and detects out-of-distribution samples, including rare events in systems such as nucleation. This method provides a general tool for data-driven atomistic modeling and combines efforts in ML, simulations, and physical explainability.
△ Less
Submitted 18 September, 2024; v1 submitted 18 April, 2024;
originally announced April 2024.
-
Space reduction techniques for the $3$-wise Kemeny problem
Authors:
Xuan Kien Phung,
Sylvie Hamel
Abstract:
Kemeny's rule is one of the most studied and well-known voting schemes with various important applications in computational social choice and biology. Recently, Kemeny's rule was generalized via a set-wise approach by Gilbert et. al. This paradigm presents interesting advantages in comparison with Kemeny's rule since not only pairwise comparisons but also the discordance between the winners of sub…
▽ More
Kemeny's rule is one of the most studied and well-known voting schemes with various important applications in computational social choice and biology. Recently, Kemeny's rule was generalized via a set-wise approach by Gilbert et. al. This paradigm presents interesting advantages in comparison with Kemeny's rule since not only pairwise comparisons but also the discordance between the winners of subsets of three alternatives are also taken into account in the definition of the $3$-wise Kendall-tau distance between two rankings. In spite of the NP-hardness of the 3-wise Kemeny problem which consists of computing the set of $3$-wise consensus rankings, namely rankings whose total $3$-wise Kendall-tau distance to a given voting profile is minimized, we establish in this paper several generalizations of the Major Order Theorems, as obtained by Milosz and Hamel for Kemeny's rule, for the $3$-wise Kemeny voting schemes to achieve a substantial search space reduction by efficiently determining in polynomial time the relative orders of pairs of alternatives. Essentially, our theorems quantify precisely the nontrivial property that if the preference for an alternative over another one in an election is strong enough, not only in the head-to-head competition but even when taking into account one or two more alternatives, then the relative order of these two alternatives in all $3$-wise consensus rankings must be as expected. As an application, we also obtain an improvement of the Major Order Theorems for Kememy's rule. Moreover, we show that the well-known $3/4$-majority rule of Betzler et al. for Kemeny's rule is only valid in general for elections with no more than $5$ alternatives with respect to the $3$-wise Kemeny scheme. Several simulations and tests of our algorithms on real-world and uniform data are provided.
△ Less
Submitted 26 December, 2023; v1 submitted 28 April, 2023;
originally announced May 2023.
-
Optimal majority rules and quantitative Condorcet properties of setwise Kemeny voting schemes
Authors:
Xuan Kien Phung,
Sylvie Hamel
Abstract:
The important Kemeny problem, which consists of computing median consensus rankings of an election with respect to the Kemeny voting rule, admits important applications in biology and computational social choice and was generalized recently via an interesting setwise approach by Gilbert et. al. Our first results establish optimal quantitative extensions of the Unanimity property and the well-known…
▽ More
The important Kemeny problem, which consists of computing median consensus rankings of an election with respect to the Kemeny voting rule, admits important applications in biology and computational social choice and was generalized recently via an interesting setwise approach by Gilbert et. al. Our first results establish optimal quantitative extensions of the Unanimity property and the well-known $3/4$-majority rule of Betzler et al. for the classical Kemeny median problem. Moreover, by elaborating an exhaustive list of quantified axiomatic properties (such as the Condorcet and Smith criteria, the $5/6$-majority rule, etc.) of the $3$-wise Kemeny rule where not only pairwise comparisons but also the discordance between the winners of subsets of three candidates are also taken into account, we come to the conclusion that the $3$-wise Kemeny voting scheme induced by the $3$-wise Kendall-tau distance presents interesting advantages in comparison with the classical Kemeny rule. For example, it satisfies several improved manipulation-proof properties. Since the $3$-wise Kemeny problem is NP-hard, our results also provide some of the first useful space reduction techniques by determining the relative orders of pairs of alternatives. Our works suggest similar interesting properties of higher setwise Kemeny voting schemes which justify and compensate for the more expensive computational cost than the classical Kemeny scheme.
△ Less
Submitted 28 April, 2023;
originally announced April 2023.
-
A structural study of hcp and liquid iron under shock compression up to 275 GPa
Authors:
Saransh Singh,
Richard Briggs,
Martin G. Gorman,
Lorin X. Benedict,
Christine J. Wu,
Sebastien Hamel,
Amy L. Coleman,
Federica Coppari,
Amalia Fernandez-Panella,
Christopher McGuire,
Melissa Sims,
June K. Wicks,
Jon H. Eggert,
Dayne E. Fratanduono,
Raymond F. Smith
Abstract:
We combine nanosecond laser shock compression with \emph{in-situ} picosecond X-ray diffraction to provide structural data on iron up to 275 GPa. We constrain the extent of hcp-liquid coexistence, the onset of total melt, and the structure within the liquid phase. Our results indicate that iron, under shock compression, melts completely by 258(8) GPa. A coordination number analysis indicates that i…
▽ More
We combine nanosecond laser shock compression with \emph{in-situ} picosecond X-ray diffraction to provide structural data on iron up to 275 GPa. We constrain the extent of hcp-liquid coexistence, the onset of total melt, and the structure within the liquid phase. Our results indicate that iron, under shock compression, melts completely by 258(8) GPa. A coordination number analysis indicates that iron is a simple liquid at these pressure-temperature conditions. We also perform texture analysis between the ambient body-centered-cubic (bcc) $α$, and the hexagonal-closed-packed (hcp) high-pressure $ε-$phase. We rule out the Rong-Dunlop orientation relationship (OR) between the $α$ and $ε-$phases. However, we cannot distinguish between three other closely related ORs: Burger's, Mao-Bassett-Takahashi, and Potter's OR. The solid-liquid coexistence region is constrained from a melt onset pressure of 225(3) GPa from previously published sound speed measurements and full melt (246.5(1.8)-258(8) GPa) from X-ray diffraction measurements, with an associated maximum latent heat of melting of 623 J/g. This value is lower than recently reported theoretical estimates and suggests that the contribution to the earth's geodynamo energy budget from heat release due to freezing of the inner core is smaller than previously thought. Melt pressures for these nanosecond shock experiments are consistent with gas gun shock experiments that last for microseconds, indicating that the melt transition occurs rapidly.
△ Less
Submitted 18 October, 2023; v1 submitted 16 April, 2023;
originally announced April 2023.
-
Diamond formation from hydrocarbon mixtures in planets
Authors:
Bingqing Cheng,
Sebastien Hamel,
Mandy Bethkenhagen
Abstract:
Hydrocarbon mixtures are extremely abundant in the Universe, and diamond formation from them can play a crucial role in shaping the interior structure and evolution of planets. With first-principles accuracy, we first estimate the diamond nucleation rate in pure liquid carbon, and then reveal the nature of chemical bonding in hydrocarbons at extreme conditions. We finally establish the pressure-te…
▽ More
Hydrocarbon mixtures are extremely abundant in the Universe, and diamond formation from them can play a crucial role in shaping the interior structure and evolution of planets. With first-principles accuracy, we first estimate the diamond nucleation rate in pure liquid carbon, and then reveal the nature of chemical bonding in hydrocarbons at extreme conditions. We finally establish the pressure-temperature phase boundary where diamond can form from hydrocarbon mixtures with different atomic fractions of carbon. Notably, we find a depletion zone at pressures above 200~GPa and temperatures below 3000~K-3500~K where diamond formation is thermodynamically favorable regardless of the carbon atomic fraction, due to a phase separation mechanism. The cooler condition of the interior of Neptune compared to Uranus means that the former is much more likely to contain the depletion zone. Our findings can help explain the dichotomy of the two ice giants manifested by the low luminosity of Uranus, and lead to a better understanding of (exo-)planetary formation and evolution.
△ Less
Submitted 2 August, 2022; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Same and interconvertible high-pressure ice phases
Authors:
Aleks Reinhardt,
Mandy Bethkenhagen,
Federica Coppari,
Marius Millot,
Sebastien Hamel,
Bingqing Cheng
Abstract:
Most experimentally known high-pressure ice phases have a body-centred cubic (bcc) oxygen lattice. Our atomistic simulations show that, amongst these bcc ice phases, ices VII, VII' and X are the same thermodynamic phase under different conditions, whereas superionic ice VII'' has a first-order phase boundary with ice VII'. Moreover, at about 300 GPa, ice X transforms into the Pbcm phase with a sha…
▽ More
Most experimentally known high-pressure ice phases have a body-centred cubic (bcc) oxygen lattice. Our atomistic simulations show that, amongst these bcc ice phases, ices VII, VII' and X are the same thermodynamic phase under different conditions, whereas superionic ice VII'' has a first-order phase boundary with ice VII'. Moreover, at about 300 GPa, ice X transforms into the Pbcm phase with a sharp structural change but no apparent activation barrier, whilst at higher pressures the barrier gradually increases. Our study thus clarifies the phase behaviour of the high-pressure insulating ices and reveals peculiar solid-solid transition mechanisms not known in other systems.
△ Less
Submitted 24 March, 2022;
originally announced March 2022.
-
Dislocation-based strength model for high energy density conditions
Authors:
Damian C. Swift,
Kazem Alidoost,
Ryan Austin,
Thomas Lockard,
Christine Wu,
Sebastien Hamel,
John E. Klepeis,
Pedro Peralta
Abstract:
We derive a continuum-level plasticity model for polycrystalline materials in the high energy density regime, based on a single dislocation density and single mobility mechanism, with an evolution model for the dislocation density. The model is formulated explicitly in terms of quantities connected closely with equation of state (EOS) theory, in particular the shear modulus and Einstein temperatur…
▽ More
We derive a continuum-level plasticity model for polycrystalline materials in the high energy density regime, based on a single dislocation density and single mobility mechanism, with an evolution model for the dislocation density. The model is formulated explicitly in terms of quantities connected closely with equation of state (EOS) theory, in particular the shear modulus and Einstein temperature, which reduces the number of unconstrained parameters while increasing the range of applicability. The least constrained component is the Peierls barrier $E_P$, which is however accessible by atomistic simulations. We demonstrate an efficient method to estimate the variation of $E_P$ with compression, constrained to fit a single flow stress datum. The formulation for dislocation mobility accounts for some or possibly all of the stiffening at high strain rates usually attributed to phonon drag. The configurational energy of the dislocations is accounted for explicitly, giving a self-consistent calculation of the conversion of plastic work to heat. The configurational energy is predicted to contribute to the mean pressure, and may reach several percent in the terapascal range, which may be significant when inferring scalar EOS data from dynamic loading experiments. The bulk elastic strain energy also contributes to the pressure, but appears to be much smaller. Although inherently describing the plastic relaxation of elastic strain, the model can be manipulated to estimate the flow stress as a function of mass density, temperature, and strain rate, which is convenient to compare with other models and inferences from experiment. The deduced flow stress reproduces systematic trends observed in elastic waves and instability growth experiments, and makes testable predictions of trends versus material and crystal type over a wide range of pressure and strain rate.
△ Less
Submitted 26 July, 2022; v1 submitted 12 October, 2021;
originally announced October 2021.
-
Properties of carbon up to 10 million kelvin from Kohn-Sham density functional theory molecular dynamics
Authors:
Mandy Bethkenhagen,
Abhiraj Sharma,
Phanish Suryanarayana,
John E. Pask,
Babak Sadigh,
Sebastien Hamel
Abstract:
Accurately modeling dense plasmas over wide ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the…
▽ More
Accurately modeling dense plasmas over wide ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the vicinity of the principal Hugoniot. In particular, we calculate the equation of state (EOS), Hugoniot, pair distribution functions, and diffusion coefficients for carbon at densities spanning 8 g/cm$^3$ to 16 g/cm$^3$ and temperatures ranging from 100 kK to 10 MK using the Spectral Quadrature (SQ) method. We find that the computed EOS and Hugoniot are in good agreement with path integral Monte Carlo results and the SESAME database. Additionally, we calculate the ion-ion structure factor and viscosity for selected points. All results presented are at the level of full Kohn-Sham DFT MD, free of empirical parameters, average-atom, and orbital-free approximations employed previously at such conditions.
△ Less
Submitted 24 January, 2023; v1 submitted 3 October, 2021;
originally announced October 2021.
-
Atom-in-jellium predictions of the shear modulus at high pressure
Authors:
Damian C. Swift,
Thomas Lockard,
Sebastien Hamel,
Christine J. Wu,
Lorin X. Benedict,
Philip A. Sterne
Abstract:
Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~$10^7$ g/cm$^3$, for several elements relevant to white dwarf (WD) stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambien…
▽ More
Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~$10^7$ g/cm$^3$, for several elements relevant to white dwarf (WD) stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambient through the one-component plasma to extreme relativistic conditions. The predictions were based on a relationship between Debye temperature and shear modulus which we assess to be accurate at the o(10%) level, and is the first known use of atom-in-jellium theory to calculate a shear modulus. We assessed the overall accuracy of the method by comparing with experimental measurements and more detailed electronic structure calculations at lower pressures.
△ Less
Submitted 27 August, 2021; v1 submitted 25 May, 2021;
originally announced May 2021.
-
Predicting the phase behaviors of superionic water at planetary conditions
Authors:
Bingqing Cheng,
Mandy Bethkenhagen,
Chris J. Pickard,
Sebastien Hamel
Abstract:
Most water in the universe may be superionic, and its thermodynamic and transport properties are crucial for planetary science but difficult to probe experimentally or theoretically. We use machine learning and free energy methods to overcome the limitations of quantum mechanical simulations, and characterize hydrogen diffusion, superionic transitions, and phase behaviors of water at extreme condi…
▽ More
Most water in the universe may be superionic, and its thermodynamic and transport properties are crucial for planetary science but difficult to probe experimentally or theoretically. We use machine learning and free energy methods to overcome the limitations of quantum mechanical simulations, and characterize hydrogen diffusion, superionic transitions, and phase behaviors of water at extreme conditions. We predict that a close-packed superionic phase with mixed stacking is stable over a wide temperature and pressure range, while a body-centered cubic phase is only thermodynamically stable in a small window but is kinetically favored. Our phase boundaries, which are consistent with the existing-albeit scarce-experimental observations, help resolve the fractions of insulating ice, different superionic phases, and liquid water inside of ice giants.
△ Less
Submitted 16 March, 2021;
originally announced March 2021.
-
Atom-in-jellium equations of state and melt curves in the white dwarf regime
Authors:
Damian C. Swift,
Thomas Lockard,
Sebastien Hamel,
Christine J. Wu,
Lorin X. Benedict,
Philip A. Sterne,
Heather D. Whitley
Abstract:
Atom-in-jellium calculations of the electron states, and perturbative calculations of the Einstein frequency, were used to construct equations of state (EOS) from around $10^{-5}$ to $10^7$g/cm$^3$ and $10^{-4}$ to $10^{6}$eV for elements relevant to white dwarf (WD) stars. This is the widest range reported for self-consistent electronic shell structure calculations. Elements of the same ratio of…
▽ More
Atom-in-jellium calculations of the electron states, and perturbative calculations of the Einstein frequency, were used to construct equations of state (EOS) from around $10^{-5}$ to $10^7$g/cm$^3$ and $10^{-4}$ to $10^{6}$eV for elements relevant to white dwarf (WD) stars. This is the widest range reported for self-consistent electronic shell structure calculations. Elements of the same ratio of atomic weight to atomic number were predicted to asymptote to the same $T=0$ isotherm, suggesting that, contrary to recent studies of the crystallization of WDs, the amount of gravitational energy that could be released by separation of oxygen and carbon is small. A generalized Lindemann criterion based on the amplitude of the ion-thermal oscillations calculated using atom-in-jellium theory, previously used to extrapolate melt curves for metals, was found to reproduce previous thermodynamic studies of the melt curve of the one component plasma with a choice of vibration amplitude consistent with low pressure results. For elements for which low pressure melting satisfies the same amplitude criterion, such as Al, this melt model thus gives a likely estimate of the melt curve over the full range of normal electronic matter; for the other elements, it provides a useful constraint on the melt locus.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Sensitivity of stellar physics to the equation of state
Authors:
D. C. Swift,
T. Lockard,
M. Bethkenhagen,
A. Kritcher,
S. Hamel,
D. Dearborn
Abstract:
The formation and evolution of stars depends on various physical aspects of stellar matter, including the equation of state (EOS) and transport properties. Although often dismissed as `ideal gas-like' and therefore simple, states occurring in stellar matter are dense plasmas, and the EOS has not been established precisely. EOS constructed using multi-physics approaches found necessary for laborato…
▽ More
The formation and evolution of stars depends on various physical aspects of stellar matter, including the equation of state (EOS) and transport properties. Although often dismissed as `ideal gas-like' and therefore simple, states occurring in stellar matter are dense plasmas, and the EOS has not been established precisely. EOS constructed using multi-physics approaches found necessary for laboratory studies of warm dense matter give significant variations in stellar regimes, and vary from the EOS commonly used in simulations of the formation and evolution of stars. We have investigated the sensitivity of such simulations to variations in the EOS, for sun-like and low-mass stars, and found a strong sensitivity of the lifetime of the Sun and of the lower luminosity limit for red dwarfs. We also found a significant sensitivity in the lower mass limit for red dwarfs. Simulations of this type are also used for other purposes in astrophysics, including the interpretation of absolute magnitude as mass, the conversion of inferred mass distribution to the initial mass function using predicted lifetimes, simulations of star formation from nebulae, simulations of galactic evolution, and the baryon census used to bound the exotic contribution to dark matter. Although many of the sensitivities of stellar physics to the EOS are large, some of the inferred astrophysical quantities are also constrained by independent measurements, although the constraints may be indirect and non-trivial. However, it may be possible to use such measurements to constrain the EOS more than presently possible by established plasma theory.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Real-space formulation of the stress tensor for $\mathcal{O}(N)$ density functional theory: application to high temperature calculations
Authors:
Abhiraj Sharma,
Sebastien Hamel,
Mandy Bethkenhagen,
John E. Pask,
Phanish Suryanarayana
Abstract:
We present an accurate and efficient real-space formulation of the Hellmann-Feynman stress tensor for $\mathcal{O}(N)$ Kohn-Sham density functional theory (DFT). While applicable at any temperature, the formulation is most efficient at high temperature where the Fermi-Dirac distribution becomes smoother and density matrix becomes correspondingly more localized. We first rewrite the orbital-depende…
▽ More
We present an accurate and efficient real-space formulation of the Hellmann-Feynman stress tensor for $\mathcal{O}(N)$ Kohn-Sham density functional theory (DFT). While applicable at any temperature, the formulation is most efficient at high temperature where the Fermi-Dirac distribution becomes smoother and density matrix becomes correspondingly more localized. We first rewrite the orbital-dependent stress tensor for real-space DFT in terms of the density matrix, thereby making it amenable to $\mathcal{O}(N)$ methods. We then describe its evaluation within the $\mathcal{O}(N)$ infinite-cell Clenshaw-Curtis Spectral Quadrature (SQ) method, a technique that is applicable to metallic as well as insulating systems, is highly parallelizable, becomes increasingly efficient with increasing temperature, and provides results corresponding to the infinite crystal without the need of Brillouin zone integration. We demonstrate systematic convergence of the resulting formulation with respect to SQ parameters to exact diagonalization results, and show convergence with respect to mesh size to established planewave results. We employ the new formulation to compute the viscosity of hydrogen at a million kelvin from Kohn-Sham quantum molecular dynamics, where we find agreement with previous more approximate orbital-free density functional methods.
△ Less
Submitted 5 June, 2020;
originally announced June 2020.
-
Equation of state and strength of diamond in high pressure ramp loading
Authors:
Damian C. Swift,
Olivier Heuze,
Amy Lazicki,
Sebastien Hamel,
Lorin X. Benedict,
Raymond F. Smith,
James M. McNaney,
Graeme J. Ackland
Abstract:
Diamond is used extensively as a component in high energy density experiments, but existing equation of state (EOS) models do not capture its observed response to dynamic loading. In particular, in contrast with first principles theoretical EOS models, no solid-solid phase changes have been detected, and no general-purpose EOS models match the measured ambient isotherm. We have performed density f…
▽ More
Diamond is used extensively as a component in high energy density experiments, but existing equation of state (EOS) models do not capture its observed response to dynamic loading. In particular, in contrast with first principles theoretical EOS models, no solid-solid phase changes have been detected, and no general-purpose EOS models match the measured ambient isotherm. We have performed density functional theory (DFT) calculations of the diamond phase to ~10TPa, well beyond its predicted range of thermodynamic stability, and used these results as the basis of a Mie-Greuneisen EOS. We also performed DFT calculations of the elastic moduli, and calibrated an algebraic elasticity model for use in simulations. We then estimated the flow stress of diamond by comparison with the stress-density relation measured experimentally in ramp-loading experiments. The resulting constitutive model allows us to place a constraint on the Taylor-Quinney factor (the fraction of plastic work converted to heat) from the observation that diamond does not melt on ramp compression.
△ Less
Submitted 31 August, 2021; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Equations of state for ruthenium and rhodium
Authors:
Damian C. Swift,
Thomas Lockard,
Olivier Heuze,
Mungo Frost,
Siegfried Glenzer,
Kenneth J. McClellan,
Sebastien Hamel,
John E. Klepeis,
Lorin X. Benedict,
Philip A. Sterne,
Graeme J. Ackland
Abstract:
Ru and Rh are interesting cases for comparing equations of state (EOS), because most general purpose EOS are semi-empirical, relying heavily on shock data, and none has been reported for Ru. EOS were calculated for both elements using all-electron atom-in-jellium theory, and cold compression curves were calculated for the common crystal types using the multi-ion pseudopotential approach. Previous…
▽ More
Ru and Rh are interesting cases for comparing equations of state (EOS), because most general purpose EOS are semi-empirical, relying heavily on shock data, and none has been reported for Ru. EOS were calculated for both elements using all-electron atom-in-jellium theory, and cold compression curves were calculated for the common crystal types using the multi-ion pseudopotential approach. Previous EOS constructed for these elements used Thomas-Fermi (TF) theory for the electronic behavior at high temperatures, which neglects electronic shell structure; the atom-in-jellium EOS exhibited pronounced features from the excitation of successive electron shells. Otherwise, the EOS matched surprisingly well, especially considering the lack of experimental data for Ru. The TF-based EOS for Ru may however be inaccurate in the multi-terapascal range needed for some high energy density experiments. The multi-ion calculations predicted that the hexagonal close-packed phase of Ru remains stable to at least 2.5 TPa and possibly 10 TPa, and that its c/a should gradually increase to the ideal value. A method was devised to estimate the variation in Debye temperature from the cold curve, and thus estimate the ion-thermal EOS without requiring relatively expensive dynamical force calculations, in a form convenient for adjusting EOS or phase boundaries. The Debye temperature estimated in this way was similar to the result from atom-in-jellium calculations. We also predict the high-pressure melt loci of both elements.
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
Atom-in-jellium equations of state for cryogenic liquids
Authors:
Thomas Lockard,
Marius Millot,
Burkhard Militzer,
Sebastien Hamel,
Lorin X. Benedict,
Philip A. Sterne,
Damian C. Swift
Abstract:
Equations of state (EOS) calculated from a computationally efficient atom-in-jellium treatment of the electronic structure have recently been shown to be consistent with more rigorous path integral Monte Carlo (PIMC) and quantum molecular dynamics (QMD) simulations of metals in the warm dense matter regime. Here we apply the atom-in-jellium model to predict wide-ranging EOS for the cryogenic liqui…
▽ More
Equations of state (EOS) calculated from a computationally efficient atom-in-jellium treatment of the electronic structure have recently been shown to be consistent with more rigorous path integral Monte Carlo (PIMC) and quantum molecular dynamics (QMD) simulations of metals in the warm dense matter regime. Here we apply the atom-in-jellium model to predict wide-ranging EOS for the cryogenic liquid elements nitrogen, oxygen, and fluorine. The principal Hugoniots for these substances were surprisingly consistent with available shock data and Thomas-Fermi (TF) EOS for very high pressures, and exhibited systematic variations from TF associated with shell ionization effects, in good agreement with PIMC, though deviating from QMD and experiment in the molecular regime. The new EOS are accurate much higher in pressure than previous widely-used models for nitrogen and oxygen in particular, and should allow much more accurate predictions for oxides and nitrides in the liquid, vapor, and plasma regime, where these have previously been constructed as mixtures containing the older EOS.
△ Less
Submitted 16 October, 2020; v1 submitted 22 June, 2019;
originally announced June 2019.
-
High temperature ion-thermal behavior from average-atom calculations
Authors:
Damian C. Swift,
Mandy Bethkenhagen,
Alfredo A. Correa,
Thomas Lockard,
Sebastien Hamel,
Lorin X. Benedict,
Philip A. Sterne,
Bard I. Bennett
Abstract:
Atom-in-jellium calculations of the Einstein frequency were used to calculate the mean displacement of an ion over a wide range of compression and temperature. Expressed as a fraction of the Wigner-Seitz radius, the displacement is a measure of the asymptotic freedom of the ion at high temperature, and thus of the change in heat capacity from 6 to 3 quadratic degrees of freedom per atom. A functio…
▽ More
Atom-in-jellium calculations of the Einstein frequency were used to calculate the mean displacement of an ion over a wide range of compression and temperature. Expressed as a fraction of the Wigner-Seitz radius, the displacement is a measure of the asymptotic freedom of the ion at high temperature, and thus of the change in heat capacity from 6 to 3 quadratic degrees of freedom per atom. A functional form for free energy was proposed based on the Maxwell-Boltzmann distribution as a correction to the Debye free energy, with a single free parameter representing the effective density of potential modes to be saturated. This parameter was investigated using molecular dynamics simulations, and found to be ~0.2 per atom. In this way, the ion-thermal contribution can be calculated for a wide-range equation of state (EOS) without requiring a large number of molecular dynamics simulations. Example calculations were performed for carbon, including the sensitivity of key EOS loci to ionic freedom.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
Atom-in-jellium equations of state in the high energy density regime
Authors:
Damian C. Swift,
Thomas Lockard,
Richard G. Kraus,
Lorin X. Benedict,
Philip A. Sterne,
Mandy Bethkenhagen,
Sebastien Hamel,
Bard I. Bennett
Abstract:
Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS…
▽ More
Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS). We report completely atom-in-jellium EOS calculations for Be, Al, Si, Fe, and Mo, as elements representative of a range of atomic number and low-pressure electronic structure. Comparing the more recent method of pseudo-atom molecular dynamics, atom-in-jellium results were similar: sometimes less accurate, sometimes more. All these techniques exhibited pronounced effects of electronic shell structure in the shock Hugoniot which are not captured by Thomas-Fermi based EOS. These results demonstrate the value of a hierarchical approach to EOS construction, using average-atom techniques with shell structure to populate a wide-range EOS surface efficiently, complemented by more rigorous 3D multi-atom calculations to validate and adjust the EOS.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
Planetary Ices and the Linear Mixing Approximation
Authors:
Mandy Bethkenhagen,
Edmund R. Meyer,
Sebastien Hamel,
Nadine Nettelmann,
Martin French,
Ludwig Scheibe,
Christopher Ticknor,
Lee A. Collins,
Joel D. Kress,
Jonathan J. Fortney,
Ronald Redmer
Abstract:
The validity of the widely used linear mixing approximation for the equations of state (EOS) of planetary ices is investigated at pressure-temperature conditions typical for the interior of Uranus and Neptune. The basis of this study are ab initio data ranging up to 1000 GPa and 20 000 K calculated via density functional theory molecular dynamics simulations. In particular, we calculate a new EOS…
▽ More
The validity of the widely used linear mixing approximation for the equations of state (EOS) of planetary ices is investigated at pressure-temperature conditions typical for the interior of Uranus and Neptune. The basis of this study are ab initio data ranging up to 1000 GPa and 20 000 K calculated via density functional theory molecular dynamics simulations. In particular, we calculate a new EOS for methane and EOS data for the 1:1 binary mixtures of methane, ammonia, and water, as well as their 2:1:4 ternary mixture. Additionally, the self-diffusion coefficients in the ternary mixture are calculated along three different Uranus interior profiles and compared to the values of the pure compounds. We find that deviations of the linear mixing approximation from the results of the real mixture are generally small; for the thermal EOS they amount to 4% or less. The diffusion coefficients in the mixture agree with those of the pure compounds within 20% or better. Finally, a new adiabatic model of Uranus with an inner layer of almost pure ices is developed. The model is consistent with the gravity field data and results in a rather cold interior ($\mathrm{T_{core}} \mathtt{\sim}$ 4000 K).
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Properties of B4C in the shocked state for pressures up to 1.5 TPa
Authors:
Andrew Shamp,
Eva Zurek,
Tadashi Ogitsu,
Dayne E. Fratanduono,
Sebastien Hamel
Abstract:
Density Functional Theory calculations using the quasi-harmonic approximation have been used to calculate the solid Hugoniot of two polytypes of boron carbide up to 100 GPa. Under the assumption that segregation into the elemental phases occurs around the pressure that the B11Cp(CBC) polytype becomes thermodynamically unstable with respect to boron and carbon, two discontinuities in the Hugoniot,…
▽ More
Density Functional Theory calculations using the quasi-harmonic approximation have been used to calculate the solid Hugoniot of two polytypes of boron carbide up to 100 GPa. Under the assumption that segregation into the elemental phases occurs around the pressure that the B11Cp(CBC) polytype becomes thermodynamically unstable with respect to boron and carbon, two discontinuities in the Hugoniot, one at 50 GPa and one at 90-100 GPa, are predicted. The former is a result of phase segregation, and the latter a phase transition within boron. First principles molecular dynamics (FPMD) simulations were employed to calculate the liquid Hugoniot of B4C up to 1.5 TPa, and the results are compared to recent experiments carried out at the Omega Laser Facility up to 700 GPa [Phys. Rev. B 94, 184107 (2016)]. A generally good agreement between theory and experiment was observed. Analysis of the FPMD simulations provides evidence for an amorphous, but covalently bound, fluid below 438 GPa, and an atomistic fluid at higher pressures and temperatures.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
Non-linear conductivity of metals from real-time quantum simulations
Authors:
Xavier Andrade,
Sebastien Hamel,
Alfredo A. Correa
Abstract:
We simulate bulk materials under strong currents by following in real-time the dynamics of the electrons under an electric field. By changing the intensity of the electric field, our method can model, for the first time, non-linear effects in the conductivity from first principles. To illustrate our approach, we show calculations that predict that liquid aluminum exhibits negative-differential con…
▽ More
We simulate bulk materials under strong currents by following in real-time the dynamics of the electrons under an electric field. By changing the intensity of the electric field, our method can model, for the first time, non-linear effects in the conductivity from first principles. To illustrate our approach, we show calculations that predict that liquid aluminum exhibits negative-differential conductivity for current densities of the order of $10^{12}-10^{13}~\mathrm{A/cm^2}$. We find that the change in the non-linear conductivity emerges from a competition between the accumulation of charge around the nuclei that increases the scattering of the conduction electrons, and a decreasing scattering cross-section at high currents.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
-
Uranus evolution models with simple thermal boundary layers
Authors:
N. Nettelmann,
K. Wang,
J. J. Fortney,
S. Hamel,
S. Yellamilli,
M. Bethkenhagen,
R. Redmer
Abstract:
The strikingly low luminosity of Uranus (Teff ~ Teq) constitutes a long-standing challenge to our understanding of Ice Giant planets. Here we present the first Uranus structure and evolution models that are constructed to agree with both the observed low luminosity and the gravity field data. Our models make use of modern ab initio equations of state at high pressures for the icy components water,…
▽ More
The strikingly low luminosity of Uranus (Teff ~ Teq) constitutes a long-standing challenge to our understanding of Ice Giant planets. Here we present the first Uranus structure and evolution models that are constructed to agree with both the observed low luminosity and the gravity field data. Our models make use of modern ab initio equations of state at high pressures for the icy components water, methane, and ammonia. Proceeding step by step, we confirm that adiabatic models yield cooling times that are too long, even when uncertainties in the ice:rock ratio (I:R) are taken into account. We then argue that the transition between the ice/rock-rich interior and the H/He-rich outer envelope should be stably stratified. Therefore, we introduce a simple thermal boundary and adjust it to reproduce the low luminosity. Due to this thermal boundary, the deep interior of the Uranus models are up to 2--3 warmer than adiabatic models, necessitating the presence of rocks in the deep interior with a possible I:R of $1\times$ solar. Finally, we allow for an equilibrium evolution (Teff ~ Teq) that begun prior to the present day, which would therefore no longer require the current era to be a "special time" in Uranus' evolution. In this scenario, the thermal boundary leads to more rapid cooling of the outer envelope. When Teff ~ Teq is reached, a shallow, subadiabatic zone in the atmosphere begins to develop. Its depth is adjusted to meet the luminosity constraint. This work provides a simple foundation for future Ice Giant structure and evolution models, that can be improved by properly treating the heat and particle fluxes in the diffusive zones.
△ Less
Submitted 30 April, 2016;
originally announced May 2016.
-
Analysis of laser shock experiments on precompressed samples using a quartz reference and application to warm dense hydrogen and helium
Authors:
Stephanie Brygoo,
Marius Millot,
Paul Loubeyre,
Amy E. Lazicki,
Sebastien Hamel,
Tingting Qi,
Peter M. Celliers,
Federica Coppari,
Jon H. Eggert,
Dayne E. Fratanduono,
Damien G. Hicks,
J. Ryan Rygg,
Raymond F. Smith,
Damian C. Swift,
Gilbert W. Collins,
Raymond Jeanloz
Abstract:
Megabar (1 Mbar = 100 GPa) laser shocks on precompressed samples allow reaching unprecedented high densities and moderately high 10000-100000K temperatures. We describe here a complete analysis framework for the velocimetry (VISAR) and pyrometry (SOP) data produced in these experiments. Since the precompression increases the initial density of both the sample of interest and the quartz reference f…
▽ More
Megabar (1 Mbar = 100 GPa) laser shocks on precompressed samples allow reaching unprecedented high densities and moderately high 10000-100000K temperatures. We describe here a complete analysis framework for the velocimetry (VISAR) and pyrometry (SOP) data produced in these experiments. Since the precompression increases the initial density of both the sample of interest and the quartz reference for pressure-density, reflectivity and temperature measurements, we describe analytical corrections based on available experimental data on warm dense silica and density-functional-theory based molecular dynamics computer simulations. Using our improved analysis framework we report a re-analysis of previously published data on warm dense hydrogen and helium, compare the newly inferred pressure, density and temperature data with most advanced equation of state models and provide updated reflectivity values.
△ Less
Submitted 12 October, 2015;
originally announced October 2015.
-
An integral equation model for warm and hot dense mixtures
Authors:
C. E. Starrett,
D. Saumon,
J. Daligault,
S. Hamel
Abstract:
In Starrett and Saumon [Phys. Rev. E 87, 013104 (2013)] a model for the calculation of electronic and ionic structures of warm and hot dense matter was described and validated. In that model the electronic structure of one "atom" in a plasma is determined using a density functional theory based average-atom (AA) model, and the ionic structure is determined by coupling the AA model to integral equa…
▽ More
In Starrett and Saumon [Phys. Rev. E 87, 013104 (2013)] a model for the calculation of electronic and ionic structures of warm and hot dense matter was described and validated. In that model the electronic structure of one "atom" in a plasma is determined using a density functional theory based average-atom (AA) model, and the ionic structure is determined by coupling the AA model to integral equations governing the fluid structure. That model was for plasmas with one nuclear species only. Here we extend it to treat plasmas with many nuclear species, i.e. mixtures, and apply it to a carbon-hydrogen mixture relevant to inertial confinement fusion experiments. Comparison of the predicted electronic and ionic structures with orbital-free and Kohn-Sham molecular dynamics simulations reveals excellent agreement wherever chemical bonding is not significant.
△ Less
Submitted 15 August, 2014;
originally announced August 2014.
-
A multiphase equation of state for carbon addressing high pressures and temperatures
Authors:
Lorin X. Benedict,
Kevin P. Driver,
Sebastien Hamel,
Burkhard Militzer,
Tingting Qi,
Alfredo A. Correa,
Eric Schwegler
Abstract:
We present a 5-phase equation of state (EOS) for elemental carbon. The phases considered are: diamond, BC8, simple-cubic, simple-hexagonal, and the liquid/plasma state. The solid phase free energies are constrained by density functional theory (DFT) calculations. Vibrational contributions to the free energy of each solid phase are treated within the quasiharmonic framework. The liquid free energy…
▽ More
We present a 5-phase equation of state (EOS) for elemental carbon. The phases considered are: diamond, BC8, simple-cubic, simple-hexagonal, and the liquid/plasma state. The solid phase free energies are constrained by density functional theory (DFT) calculations. Vibrational contributions to the free energy of each solid phase are treated within the quasiharmonic framework. The liquid free energy model is constrained by fitting to a combination of DFT molecular dynamics performed over the range 10,000 K < T < 100,000 K, and path integral quantum Monte Carlo calculations for T > 100,000 K (both for ρ between 3 and 12 g/cc, with select higher-ρ DFT calculations as well). The liquid free energy model includes an atom-in-jellium approach to account for the effects of ionization due to temperature and pressure in the plasma state, and an ion-thermal model which includes the approach to the ideal gas limit. The precise manner in which the ideal gas limit is reached is greatly constrained by both the highest temperature DFT data and the path integral data, forcing us to discard an ion-thermal model we had used previously in favor of a new one. Predictions are made for the principal Hugoniot and the room-temperature isotherm, and comparisons are made to recent experimental results.
△ Less
Submitted 18 November, 2013;
originally announced November 2013.
-
Mass-radius relationships for exoplanets
Authors:
Damian Swift,
Jon Eggert,
Damien Hicks,
Sebastien Hamel,
Kyle Caspersen,
Eric Schwegler,
Gilbert Collins,
Nadine Nettelmann,
Graeme Ackland
Abstract:
For planets other than Earth, interpretation of the composition and structure depends largely on comparing the mass and radius with the composition expected given their distance from the parent star. The composition implies a mass-radius relation which relies heavily on equations of state calculated from electronic structure theory and measured experimentally on Earth. We lay out a method for deri…
▽ More
For planets other than Earth, interpretation of the composition and structure depends largely on comparing the mass and radius with the composition expected given their distance from the parent star. The composition implies a mass-radius relation which relies heavily on equations of state calculated from electronic structure theory and measured experimentally on Earth. We lay out a method for deriving and testing equations of state, and deduce mass-radius and mass-pressure relations for key materials whose equation of state is reasonably well established, and for differentiated Fe/rock. We find that variations in the equation of state, such as may arise when extrapolating from low pressure data, can have significant effects on predicted mass- radius relations, and on planetary pressure profiles. The relations are compared with the observed masses and radii of planets and exoplanets. Kepler-10b is apparently 'Earth- like,' likely with a proportionately larger core than Earth's, nominally 2/3 of the mass of the planet. CoRoT-7b is consistent with a rocky mantle over an Fe-based core which is likely to be proportionately smaller than Earth's. GJ 1214b lies between the mass-radius curves for H2O and CH4, suggesting an 'icy' composition with a relatively large core or a relatively large proportion of H2O. CoRoT-2b is less dense than the hydrogen relation, which could be explained by an anomalously high degree of heating or by higher than assumed atmospheric opacity. HAT-P-2b is slightly denser than the mass-radius relation for hydrogen, suggesting the presence of a significant amount of matter of higher atomic number. CoRoT-3b lies close to the hydrogen relation. The pressure at the center of Kepler-10b is 1.5+1.2-1.0 TPa. The central pressure in CoRoT-7b is probably close to 0.8TPa, though may be up to 2TPa.
△ Less
Submitted 15 September, 2011; v1 submitted 26 January, 2010;
originally announced January 2010.
-
Relativity as a Consequence of Quantum Entanglement: A Quantum Logic Gate Space Model for the Universe
Authors:
John S. Hamel
Abstract:
Everything in the Universe is assumed to be compromised of pure reversible quantum Toffoli gates, including empty space itself. Empty space can be configured into photon or matter gates simply by swapping logic input information with these entities through the phenomenon of quantum mechanical entanglement between photons and empty space Toffoli gates. The essential difference between empty space…
▽ More
Everything in the Universe is assumed to be compromised of pure reversible quantum Toffoli gates, including empty space itself. Empty space can be configured into photon or matter gates simply by swapping logic input information with these entities through the phenomenon of quantum mechanical entanglement between photons and empty space Toffoli gates. The essential difference between empty space, photons and matter gates are the logic input values of their respective Toffoli gates. Empty space is characterized by an inability for the logic inputs to influence the internal logic state of its Toffoli gates since the control lines are set to logic 0. Photons and matter are characterized by Toffoli gates where the control lines are set to logic 1 enabling their logic inputs to control their internal logic states allowing for their interaction according to the laws of physics associated with reality. Photons swapping logic input information with empty space results in the propagation of light. Photons facilitating the swapping of information between matter and empty space gates leads to the laws of motion including relativity. This model enables the derivation of many physical laws from purely quantum mechanical considerations including the Heisenberg Uncertainty Principle, the Lorentz transformations of special relativity, and the relationship between relativistic energy and mass. The model provides a possible explanation for many physical phenomena including dark matter, anti-matter, and an inflationary Universe.
△ Less
Submitted 14 May, 2009; v1 submitted 7 May, 2009;
originally announced May 2009.
-
A Thermodynamic Turing Machine: Artificial Molecular Computing Using Classical Reversible Logic Switching Networks
Authors:
John S. Hamel
Abstract:
This paper discusses how to implement certain classes of quantum computer algorithms using classical discrete switching networks that are amenable to implementation in main stream CMOS transistor IC technology. The methods differ from other classical approaches in that asynchronous feedback is exploited in classical transistor reversible logic circuits to implement the Hadamard transform in one…
▽ More
This paper discusses how to implement certain classes of quantum computer algorithms using classical discrete switching networks that are amenable to implementation in main stream CMOS transistor IC technology. The methods differ from other classical approaches in that asynchronous feedback is exploited in classical transistor reversible logic circuits to implement the Hadamard transform in one simultaneous step over all qubits as in a true quantum computer. The Simon problem is used as an example. The method is used to provide an order n execution speed method for the Gaussian elimination step in the Simon problem. The approach is referred to as a Thermodynamic Turing Machine in that it behaves like an artificial molecule where solutions to a problem are found by evolving the classical circuits from one thermodynamic equilibrium state to another.
△ Less
Submitted 14 May, 2009; v1 submitted 21 April, 2009;
originally announced April 2009.
-
Phase separation in hydrogen-helium mixtures at Mbar pressures
Authors:
M. A. Morales,
E. Schwegler,
D. M. Ceperley,
C. Pierleoni,
S. Hamel,
K. Caspersen
Abstract:
The properties of hydrogen-helium mixtures at Mbar pressures and intermediate temperatures (4000 to 10000 K) are calculated with first-principles molecular dynamics simulations. We determine the equation of state as a function of density, temperature, and composition and, using thermodynamic integration, we estimate the Gibbs free energy of mixing, thereby determining the temperature, at a given…
▽ More
The properties of hydrogen-helium mixtures at Mbar pressures and intermediate temperatures (4000 to 10000 K) are calculated with first-principles molecular dynamics simulations. We determine the equation of state as a function of density, temperature, and composition and, using thermodynamic integration, we estimate the Gibbs free energy of mixing, thereby determining the temperature, at a given pressure, when helium becomes insoluble in dense metallic hydrogen. These results are directly relevant to models of the interior structure and evolution of Jovian planets. We find that the temperatures for the demixing of helium and hydrogen are sufficiently high to cross the planetary adiabat of Saturn at pressures around 5 Mbar; helium is partially miscible throughout a significant portion of the interior of Saturn, and to a lesser extent in Jupiter.
△ Less
Submitted 5 March, 2009;
originally announced March 2009.
-
Comparing RNA structures using a full set of biologically relevant edit operations is intractable
Authors:
Guillaume Blin,
Sylvie Hamel,
Stéphane Vialette
Abstract:
Arc-annotated sequences are useful for representing structural information of RNAs and have been extensively used for comparing RNA structures in both terms of sequence and structural similarities. Among the many paradigms referring to arc-annotated sequences and RNA structures comparison (see \cite{IGMA_BliDenDul08} for more details), the most important one is the general edit distance. The pro…
▽ More
Arc-annotated sequences are useful for representing structural information of RNAs and have been extensively used for comparing RNA structures in both terms of sequence and structural similarities. Among the many paradigms referring to arc-annotated sequences and RNA structures comparison (see \cite{IGMA_BliDenDul08} for more details), the most important one is the general edit distance. The problem of computing an edit distance between two non-crossing arc-annotated sequences was introduced in \cite{Evans99}. The introduced model uses edit operations that involve either single letters or pairs of letters (never considered separately) and is solvable in polynomial-time \cite{ZhangShasha:1989}. To account for other possible RNA structural evolutionary events, new edit operations, allowing to consider either silmutaneously or separately letters of a pair were introduced in \cite{jiangli}; unfortunately at the cost of computational tractability. It has been proved that comparing two RNA secondary structures using a full set of biologically relevant edit operations is {\sf\bf NP}-complete. Nevertheless, in \cite{DBLP:conf/spire/GuignonCH05}, the authors have used a strong combinatorial restriction in order to compare two RNA stem-loops with a full set of biologically relevant edit operations; which have allowed them to design a polynomial-time and space algorithm for comparing general secondary RNA structures. In this paper we will prove theoretically that comparing two RNA structures using a full set of biologically relevant edit operations cannot be done without strong combinatorial restrictions.
△ Less
Submitted 20 December, 2008;
originally announced December 2008.