Showing 1–50 of 99 results for author: Guzman, E

Acoustic Phonon Characteristics of Gallium Oxide Single Crystals Investigated with Brillouin-Mandelstam Light Scattering Spectroscopy

Authors: Dylan Wright, Erick Guzman, Md. Sabbir Hossen Bijoy, Richard B. Wilson, Dinusha Herath Mudiyanselage, Houqiang Fu, Fariborz Kargar, Alexander A. Balandin

Abstract: We report an investigation of the bulk and surface acoustic phonons in gallium oxide ultra-wide bandgap single crystals along various crystallographic directions using Brillouin-Mandelstam spectroscopy. Pronounced anisotropy in the acoustic phonon dispersion and velocities was observed across different crystal orientations. The measured average acoustic phonon velocities for the crystallographic d… ▽ More We report an investigation of the bulk and surface acoustic phonons in gallium oxide ultra-wide bandgap single crystals along various crystallographic directions using Brillouin-Mandelstam spectroscopy. Pronounced anisotropy in the acoustic phonon dispersion and velocities was observed across different crystal orientations. The measured average acoustic phonon velocities for the crystallographic directions of interest are 5,250 m/s and 4,990 m/s. The surface acoustic phonons propagate approximately twice as slowly as the bulk acoustic phonons. Our results suggest that the anisotropy of heat conduction in gallium oxide results from the difference in phonon velocities rather than the phonon lifetime. The obtained information for bulk and surface acoustic phonons can be used for developing accurate theoretical models of phonon scattering and optimization of thermal and electrical transport in this technologically important ultra-wide bandgap semiconductor. △ Less

Submitted 6 June, 2025; originally announced June 2025.

Comments: 23 pages; 5 figures; 1 table

Compression, simulation, and synthesis of turbulent flows with tensor trains

Authors: Stefano Pisoni, Raghavendra Dheeraj Peddinti, Egor Tiunov, Siddhartha E. Guzman, Leandro Aolita

Abstract: Numerical simulations of turbulent fluids are paramount to real-life applications, from predicting and modeling flows to diagnostic purposes in engineering. However, they are also computationally challenging due to their intrinsically non-linear dynamics, which requires a very high spatial resolution to accurately describe them. A promising idea is to represent flows on a discrete mesh using tenso… ▽ More Numerical simulations of turbulent fluids are paramount to real-life applications, from predicting and modeling flows to diagnostic purposes in engineering. However, they are also computationally challenging due to their intrinsically non-linear dynamics, which requires a very high spatial resolution to accurately describe them. A promising idea is to represent flows on a discrete mesh using tensor trains (TTs), featuring a convenient scaling of the number of parameters with the mesh size. However, it is yet not clear how the compression power of TTs is affected by the complexity of the flows, measured by the Reynolds number. In fact, no TT fluid solver has been extensively validated in a fully developed turbulent regime yet. We fill this gap. We conduct a comprehensive analysis of TTs as an Ansatz to compress, simulate, and synthetically generate fiducial turbulent snapshots in 3D. Specifically, first, we exhaustively investigate the effect of TT compression of given snapshots on key turbulence signatures, including the energy spectrum and different accuracy metrics. Second, we present a TT solver to simulate time evolution of 3D fluid fields according to the incompressible Navier-Stokes equations entirely within the compressed representation. Third, we develop a TT algorithm to generate artificial snapshots displaying all the signatures of turbulence. In all three cases, a number of parameters scaling polylogarithmically with the mesh size is enough for accurate descriptions. Our findings confirm that fluids in truly turbulent regimes admit an efficient TT description and offer a powerful, quantum-inspired toolkit for their computational treatment. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Who Speaks for Ethics? How Demographics Shape Ethical Advocacy in Software Development

Authors: Lauren Olson, Ricarda Anna-Lena Fischer, Florian Kunneman, Emitzá Guzmán

Abstract: The integration of ethics into software development faces significant challenges due to market fundamentalism in organizational practices, where profit often takes precedence over ethical considerations. Additionally, the critical influence of practitioners' individual backgrounds on ethical decision-making remains underexplored, highlighting a gap in comprehensive research. This is especially ess… ▽ More The integration of ethics into software development faces significant challenges due to market fundamentalism in organizational practices, where profit often takes precedence over ethical considerations. Additionally, the critical influence of practitioners' individual backgrounds on ethical decision-making remains underexplored, highlighting a gap in comprehensive research. This is especially essential to understand due to the demographic imbalance in software roles. This study investigates ethical concerns in software development, focusing on how they are perceived, prioritized, and addressed by demographically different practitioners. By surveying 217 software practitioners across diverse roles, industries, and countries, we identify critical barriers to ethical integration and examine practitioners' capacity to mitigate these issues. Our findings reveal pronounced demographic disparities, with marginalized groups - including women, BIPOC, and disabled individuals - reporting ethical concerns at higher frequencies. Notably, marginalized practitioners demonstrated heightened sensitivity to ethical implementation and greater empowerment to address them. However, practitioners overall often lack the support needed to address ethical challenges effectively. These insights underscore the urgent need for reforms in software education and development processes that center on diverse perspectives. Such reforms are essential to advancing ethical integration in software development and ensuring responsible computing practices in an increasingly complex technological landscape. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Comments: FAccT '25: Proceedings of the 2025 ACM Conference on Fairness, Accountability, and Transparency

What is unethical about software? User perceptions in the Netherlands

Authors: Yagil Elias, Tom P. Humbert, Lauren Olson, Emitzá Guzmán

Abstract: Software has the potential to improve lives. Yet, unethical and uninformed software practices are at the root of an increasing number of ethical concerns. Despite its pervasiveness, few research has analyzed end-users perspectives on the ethical issues of the software they use. We address this gap, and investigate end-user's ethical concerns in software through 19 semi-structured interviews with r… ▽ More Software has the potential to improve lives. Yet, unethical and uninformed software practices are at the root of an increasing number of ethical concerns. Despite its pervasiveness, few research has analyzed end-users perspectives on the ethical issues of the software they use. We address this gap, and investigate end-user's ethical concerns in software through 19 semi-structured interviews with residents of the Netherlands. We ask a diverse group of users about their ethical concerns when using everyday software applications. We investigate the underlying reasons for their concerns and what solutions they propose to eliminate them. We find that our participants actively worry about privacy, transparency, manipulation, safety and inappropriate content; with privacy and manipulation often being at the center of their worries. Our participants demand software solutions to improve information clarity in applications and provide more control over the user experience. They further expect larger systematic changes within software practices and government regulation. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Comments: 13 pages, 3 figures, 1 table, conference submission

Exploring the world of rhamnolipids: A critical review of their production, interfacial properties, and potential application

Authors: Eduardo Guzman, Francisco Ortega, Ramon G. Rubio

Abstract: Rhamnolipids are very promising sugar-based biosurfactants, generally produced by bacteria, with a wide range of properties that can be exploited at an industrial and technological level, e.g. in cosmetics, food science, or oil recovery, to provide benefits for human health and the environment. This has led to intensive research into optimizing their production to increase yields and minimize cost… ▽ More Rhamnolipids are very promising sugar-based biosurfactants, generally produced by bacteria, with a wide range of properties that can be exploited at an industrial and technological level, e.g. in cosmetics, food science, or oil recovery, to provide benefits for human health and the environment. This has led to intensive research into optimizing their production to increase yields and minimize costs, which is challenging because biotechnological methods for rhamnolipid production result in complex product mixtures and require the introduction of complex separation strategies to ensure the purity of the rhamnolipid obtained. This is an important issue for the introduction of rhamnolipids to the market due to the differences that exist between the properties of the different congeners. This review attempts to provide an overview of the interfacial properties, potential applications, and recent advances in understanding the molecular mechanisms that govern the adsorption to interfaces and assembly in solution of rhamnolipids. In addition, the review also discusses some general aspects related to the production and purification methods of rhamnolipids, highlighting the need for further research to fully exploit their potential. It is hoped that this review will contribute to the growing body of knowledge about rhamnolipids and stimulate further research in this field. △ Less

Submitted 4 March, 2025; originally announced March 2025.

Comments: Published in Current Opinion in Colloid and Interface Science 69 (2024) 101780

Journal ref: Current Opinion in Colloid and Interface Science 69 (2024) 101780

Hydrogen bond-driven interactions between chitosan and biobased surfactants: A study of bulk behavior and surface adsorption

Authors: Ana Puente-Santamaria, Josselyn N. Molina-Basurto, Eva Gerardin, Francisco Ortega, Ramon G. Rubio, Eduardo Guzman

Abstract: This study explores the hydrogen bond-mediated association between chitosan (CHI) and alkyl polyglucoside (APG), a bio-based surfactant, in acidic conditions with varying ionic strengths. Unlike conventional polyelectrolyte-surfactant interactions that depend on electrostatic forces, the association in this system relies purely on non-ionic interactions. Using UV visible spectroscopy, phase diagra… ▽ More This study explores the hydrogen bond-mediated association between chitosan (CHI) and alkyl polyglucoside (APG), a bio-based surfactant, in acidic conditions with varying ionic strengths. Unlike conventional polyelectrolyte-surfactant interactions that depend on electrostatic forces, the association in this system relies purely on non-ionic interactions. Using UV visible spectroscopy, phase diagrams, and quartz crystal microbalance with dissipation monitoring (QCM-D), the bulk phase behavior and adsorption characteristics of CHI-APG mixtures on negatively charged surfaces was studied. Results demonstrate that APG concentration controls the phase behavior, with moderate levels inducing coacervate formation, while higher ionic strengths promote this coacervation through enhanced hydrogen bonding interactions. This shift leads to the formation of a phase separated morphology, with micronsized coacervate droplets observable in solution. Zeta potential measurements suggest that these droplets adopt a core shell structure, characterized by a hydrophobic core due to the surfactant s alkyl chains and a hydrophilic shell formed by chitosan. Additionally, the coacervation process significantly enhances the adsorption of CHI APG complexes onto solid substrates, a feature with potential applications in targeted delivery and controlled release systems. Overall, this study provides critical insights into the design of bio-based, sustainable formulations and expands the understanding of hydrogen bond-driven, nonelectrostatic coacervation, relevant for applications in cosmetics, biomedical coatings, and environmentally friendly materials. △ Less

Submitted 3 March, 2025; originally announced March 2025.

Comments: Published in Journal of Molecular Liquids 425 (2025) 127259

Journal ref: Journal of Molecular Liquids 425 (2025) 127259

ALMA-IMF XVII -- Census and lifetime of high-mass prestellar cores in 14 massive protoclusters

Authors: M. Valeille-Manet, S. Bontemps, T. Csengeri, T. Nony, F. Motte, A. M. Stutz, A. Gusdorf, A. Ginsburg, R. Galván-Madrid, P. Sanhueza, M. Bonfand, N. Brouillet, P. Dell'Ova, F. Louvet, N. Cunningham, M. Fernández-López, F. Herpin, F. Wyrowski, R. H. Álvarez-Gutiérrez, M. Armante, A. E. Guzmán, N. Kessler, A. Koley, J. Salinas, T. Yoo , et al. (2 additional authors not shown)

Abstract: High-mass prestellar cores are extremely rare. The search for such objects has long been hindered by small sample sizes, leading to large uncertainties in their lifetimes and the conditions in which high-mass stars ($> 8\,M_{\odot}$) form. We leverage the large sample ($\sim 580$ cores) detected in the ALMA-IMF survey to identify both protostellar and prestellar cores and estimate their relative l… ▽ More High-mass prestellar cores are extremely rare. The search for such objects has long been hindered by small sample sizes, leading to large uncertainties in their lifetimes and the conditions in which high-mass stars ($> 8\,M_{\odot}$) form. We leverage the large sample ($\sim 580$ cores) detected in the ALMA-IMF survey to identify both protostellar and prestellar cores and estimate their relative lifetimes. We use CO and SiO outflows to identify protostellar cores and introduce a new automated method based on aperture line emission and background subtraction to systematically detect outflows associated with each of the 141 most massive cores. Massive cores that do not drive an outflow in either tracer are classified as prestellar. Our method enables efficient outflow detection with performance comparable to more traditional techniques. We identify 30 likely prestellar cores with $M > 8\,M_{\odot}$, including 12 with $M > 16\,M_{\odot}$, the best candidates for high-mass star precursors. Most of these 12 cores reside in the crowded central regions of protoclusters, where high-mass stars are expected to form. Using prestellar-to-protostellar core ratios and a 300 kyr protostellar lifetime, we estimate prestellar lifetimes of 120 to 240 kyr for $8\,M_{\odot} < M < 16\,M_{\odot}$ and 50 to 100 kyr for $30\,M_{\odot} < M < 55\,M_{\odot}$. These timescales, which depend on different mass reservoir evolution scenarios, significantly exceed the 4 to 15 kyr free-fall time of the cores, suggesting that high-mass cores persist for 10 to 30 free-fall times. This indicates that collapse is slowed by turbulence, magnetic fields, or rotation at or below the observed scale. △ Less

Submitted 13 February, 2025; originally announced February 2025.

Journal ref: A&A 696, A11 (2025)

Cooperative Patrol Routing: Optimizing Urban Crime Surveillance through Multi-Agent Reinforcement Learning

Authors: Juan Palma-Borda, Eduardo Guzmán, María-Victoria Belmonte

Abstract: The effective design of patrol strategies is a difficult and complex problem, especially in medium and large areas. The objective is to plan, in a coordinated manner, the optimal routes for a set of patrols in a given area, in order to achieve maximum coverage of the area, while also trying to minimize the number of patrols. In this paper, we propose a multi-agent reinforcement learning (MARL) mod… ▽ More The effective design of patrol strategies is a difficult and complex problem, especially in medium and large areas. The objective is to plan, in a coordinated manner, the optimal routes for a set of patrols in a given area, in order to achieve maximum coverage of the area, while also trying to minimize the number of patrols. In this paper, we propose a multi-agent reinforcement learning (MARL) model, based on a decentralized partially observable Markov decision process, to plan unpredictable patrol routes within an urban environment represented as an undirected graph. The model attempts to maximize a target function that characterizes the environment within a given time frame. Our model has been tested to optimize police patrol routes in three medium-sized districts of the city of Malaga. The aim was to maximize surveillance coverage of the most crime-prone areas, based on actual crime data in the city. To address this problem, several MARL algorithms have been studied, and among these the Value Decomposition Proximal Policy Optimization (VDPPO) algorithm exhibited the best performance. We also introduce a novel metric, the coverage index, for the evaluation of the coverage performance of the routes generated by our model. This metric is inspired by the predictive accuracy index (PAI), which is commonly used in criminology to detect hotspots. Using this metric, we have evaluated the model under various scenarios in which the number of agents (or patrols), their starting positions, and the level of information they can observe in the environment have been modified. Results show that the coordinated routes generated by our model achieve a coverage of more than $90\%$ of the $3\%$ of graph nodes with the highest crime incidence, and $65\%$ for $20\%$ of these nodes; $3\%$ and $20\%$ represent the coverage standards for police resource allocation. △ Less

Submitted 14 January, 2025; originally announced January 2025.

MSC Class: 68T20; 68T42 ACM Class: I.2.1; I.2.8; I.6.7

A Digital Shadow for Modeling, Studying and Preventing Urban Crime

Authors: Juan Palma-Borda, Eduardo Guzmán, María-Victoria Belmonte

Abstract: Crime is one of the greatest threats to urban security. Around 80 percent of the world's population lives in countries with high levels of criminality. Most of the crimes committed in the cities take place in their urban environments. This paper presents the development and validation of a digital shadow platform for modeling and simulating urban crime. This digital shadow has been constructed usi… ▽ More Crime is one of the greatest threats to urban security. Around 80 percent of the world's population lives in countries with high levels of criminality. Most of the crimes committed in the cities take place in their urban environments. This paper presents the development and validation of a digital shadow platform for modeling and simulating urban crime. This digital shadow has been constructed using data-driven agent-based modeling and simulation techniques, which are suitable for capturing dynamic interactions among individuals and with their environment. Our approach transforms and integrates well-known criminological theories and the expert knowledge of law enforcement agencies (LEA), policy makers, and other stakeholders under a theoretical model, which is in turn combined with real crime, spatial (cartographic) and socio-economic data into an urban model characterizing the daily behavior of citizens. The digital shadow has also been instantiated for the city of Malaga, for which we had over 300,000 complaints available. This instance has been calibrated with those complaints and other geographic and socio-economic information of the city. To the best of our knowledge, our digital shadow is the first for large urban areas that has been calibrated with a large dataset of real crime reports and with an accurate representation of the urban environment. The performance indicators of the model after being calibrated, in terms of the metrics widely used in predictive policing, suggest that our simulated crime generation matches the general pattern of crime in the city according to historical data. Our digital shadow platform could be an interesting tool for modeling and predicting criminal behavior in an urban environment on a daily basis and, thus, a useful tool for policy makers, criminologists, sociologists, LEAs, etc. to study and prevent urban crime. △ Less

Submitted 8 January, 2025; originally announced January 2025.

ACM Class: I.6.3; J.4

Sidewalk Hazard Detection Using Variational Autoencoder and One-Class SVM

Authors: Edgar Guzman, Robert D. Howe

Abstract: The unpredictable nature of outdoor settings introduces numerous safety concerns, making hazard detection crucial for safe navigation. This paper introduces a novel system for sidewalk safety navigation utilizing a hybrid approach that combines a Variational Autoencoder (VAE) with a One-Class Support Vector Machine (OCSVM). The system is designed to detect anomalies on sidewalks that could potenti… ▽ More The unpredictable nature of outdoor settings introduces numerous safety concerns, making hazard detection crucial for safe navigation. This paper introduces a novel system for sidewalk safety navigation utilizing a hybrid approach that combines a Variational Autoencoder (VAE) with a One-Class Support Vector Machine (OCSVM). The system is designed to detect anomalies on sidewalks that could potentially pose walking hazards. A dataset comprising over 15,000 training frames and 5,000 testing frames was collected using video recordings, capturing various sidewalk scenarios, including normal and hazardous conditions. During deployment, the VAE utilizes its reconstruction mechanism to detect anomalies within a frame. Poor reconstruction by the VAE implies the presence of an anomaly, after which the OCSVM is used to confirm whether the anomaly is hazardous or non-hazardous. The proposed VAE model demonstrated strong performance, with a high Area Under the Curve (AUC) of 0.94, effectively distinguishing anomalies that could be potential hazards. The OCSVM is employed to reduce the detection of false hazard anomalies, such as manhole or water valve covers. This approach achieves an accuracy of 91.4%, providing a highly reliable system for distinguishing between hazardous and non-hazardous scenarios. These results suggest that the proposed system offers a robust solution for hazard detection in uncertain environments. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Comments: 7 pages

Crossing Margins: Intersectional Users' Ethical Concerns about Software

Authors: Lauren Olson, Tom P. Humbert, Ricarda Anna-Lena Fischer, Bob Westerveld, Florian Kunneman, Emitzá Guzmán

Abstract: Many modern software applications present numerous ethical concerns due to conflicts between users' values and companies' priorities. Intersectional communities, those with multiple marginalized identities, are disproportionately affected by these ethical issues, leading to legal, financial, and reputational issues for software companies, as well as real-world harm for intersectional users. Histor… ▽ More Many modern software applications present numerous ethical concerns due to conflicts between users' values and companies' priorities. Intersectional communities, those with multiple marginalized identities, are disproportionately affected by these ethical issues, leading to legal, financial, and reputational issues for software companies, as well as real-world harm for intersectional users. Historically, the voices of intersectional communities have been systematically marginalized and excluded from contributing their unique perspectives to software design, perpetuating software-related ethical concerns. This work aims to fill the gap in research on intersectional users' software-related perspectives and provide software practitioners with a starting point to address their ethical concerns. We aggregated and analyzed the intersectional users' ethical concerns over time and developed a prioritization method to identify critical concerns. To achieve this, we collected posts from over 700 intersectional subreddits discussing software applications, utilized deep learning to identify ethical concerns in these posts, and employed state-of-the-art techniques to analyze their content in relation to time and priority. Our findings revealed that intersectional communities report \textit{critical} complaints related to cyberbullying, inappropriate content, and discrimination, highlighting significant flaws in modern software, particularly for intersectional users. Based on these findings, we discuss how to better address the ethical concerns of intersectional users in software development. △ Less

Submitted 10 October, 2024; originally announced October 2024.

Acoustic and Optical Phonon Frequencies and Acoustic Phonon Velocities in Silicon-Doped Aluminum Nitride Thin Films

Authors: Dylan Wright, Dinusha Herath Mudiyanselage, Erick Guzman, Xuke Fu, Jordan Teeter, Bingcheng Da, Fariborz Kargar, Houqiang Fu, Alexander A. Balandin

Abstract: We report the results of the study of the acoustic and optical phonons in Si-doped AlN thin films grown by metalorganic chemical vapor deposition on sapphire substrates. The Brillouin - Mandelstam and Raman light scattering spectroscopies were used to measure the acoustic and optical phonon frequencies close to the Brillouin zone center. The optical phonon frequencies reveal non-monotonic changes,… ▽ More We report the results of the study of the acoustic and optical phonons in Si-doped AlN thin films grown by metalorganic chemical vapor deposition on sapphire substrates. The Brillouin - Mandelstam and Raman light scattering spectroscopies were used to measure the acoustic and optical phonon frequencies close to the Brillouin zone center. The optical phonon frequencies reveal non-monotonic changes, reflective of the variations in the thin-film strain and dislocation densities with the addition of Si dopant atoms. The acoustic phonon velocity decreases monotonically with increasing Si dopant concentration, reducing by ~300 m/s at the doping level of 3 x 10^19 1/cm3. Knowledge of the acoustic phonon velocities can be used to optimize ultra-wide bandgap semiconductor heterostructures and minimize the thermal boundary resistance of high-power devices. △ Less

Submitted 13 August, 2024; originally announced August 2024.

Comments: 16 pages; 4 figures

INvestigations of massive Filaments ANd sTar formation (INFANT). I. Core Identification and Core Mass Function

Authors: Yu Cheng, Xing Lu, Patricio Sanhueza, Hauyu Baobab Liu, Qizhou Zhang, Roberto Galván-Madrid, Ke Wang, Fumitaka Nakamura, Tie Liu, Siyi Feng, Shanghuo Li, Sihan Jiao, Kei E. I. Tanaka, Xunchuan Liu, Pak Shing Li, Qiuyi Luo, Qilao Gu, Yuxin Lin, András E. Guzmán

Abstract: Filamentary structures are ubiquitously found in high-mass star-forming clouds. To investigate the relationship between filaments and star formation, we carry out the INFANT (INvestigations of massive Filaments ANd sTar formation) survey, a multi-scale, multi-wavelength survey of massive filamentary clouds with ALMA band 3/band 6 and VLA K band. In this first paper, we present the ALMA band 6 cont… ▽ More Filamentary structures are ubiquitously found in high-mass star-forming clouds. To investigate the relationship between filaments and star formation, we carry out the INFANT (INvestigations of massive Filaments ANd sTar formation) survey, a multi-scale, multi-wavelength survey of massive filamentary clouds with ALMA band 3/band 6 and VLA K band. In this first paper, we present the ALMA band 6 continuum observations toward a sample of 8 high-mass star forming filaments. We covered each target with approximately rectangular mosaic field of view with two 12-m array configurations, achieving an angular resolution of $\sim$0.6" (2700 AU at 4.5 kpc) and a continuum rms of $\sim$0.1 mJy/beam ($\sim$0.06 Msun in gas mass assuming 15 K). We identify cores using the getsf and astrodendro and find the former is more robust in terms of both identification and measuring flux densities. We identify in total 183 dense cores (15--36 cores in each cloud) and classify their star formation states via outflow and warm gas tracers. The protostellar cores are statistically more massive than the prestellar cores, possibly indicating further accretion onto cores after formation of protostars. For the high-mass end ($M_\text{core}$ $>$ 1.5 Msun) of the core mass function (CMF) we derive a power-law index of $-$1.15 $\pm$ 0.12 for the whole sample, and $-$1.70 $\pm$ 0.25 for the prestellar population. We also find a steepening trend in CMF with cloud evolution ($-$0.89 $\pm$ 0.15 for the young group v.s. $-$1.44 $\pm$ 0.25 for the evolved group) and discuss its implication for cluster formation. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: 25 pages, 8 figures, accepted for ApJ

Acoustic and Optical Phonons in Quasi-Two-Dimensional MPX3 Van der Waals Semiconductors

Authors: Dylan Wright, Zahra Ebrahim Nataj, Erick Guzman, Jake Polster, Menno Bouman, Fariborz Kargar, Alexander A. Balandin

Abstract: We report the results of the investigation of the acoustic and optical phonons in quasi-two-dimensional antiferromagnetic semiconductors of the transition metal phosphorus trisulfide family with Mn, Fe, Co, Ni, and Cd as metal atoms. The Brillouin-Mandelstam and Raman light scattering spectroscopies were conducted at room temperature to measure the acoustic and optical phonon frequencies close to… ▽ More We report the results of the investigation of the acoustic and optical phonons in quasi-two-dimensional antiferromagnetic semiconductors of the transition metal phosphorus trisulfide family with Mn, Fe, Co, Ni, and Cd as metal atoms. The Brillouin-Mandelstam and Raman light scattering spectroscopies were conducted at room temperature to measure the acoustic and optical phonon frequencies close to the Brillouin zone center. The absorption and index of refraction were measured in the visible and infrared ranges using the reflectometry technique. We found an intriguing large variation, over ~28%, in the acoustic phonon group velocities in this group of materials with similar crystal structures. Our data indicate that the full-width-at-half-maximum of the acoustic phonon peaks is strongly affected by the optical properties and the electronic band gap. The acoustic phonon lifetime extracted for some of the materials was correlated with their thermal properties. The obtained results are important for understanding the layered van der Waals semiconductors and for assessing their potential for optoelectronic and spintronic device applications. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: 19 pages; 4 figures

A closer physico-chemical look to the Layer-by-Layer electrostatic self-assembly of polyelectrolyte multilayers

Authors: Eduardo Guzman, Ramon G. Rubio, Francisco Ortega

Abstract: The fabrication of polyelectrolyte multilayer films (PEMs) using the Layer-by-Layer (LbL) method is one of the most versatile approaches for manufacturing functional surfaces. This is the result of the possibility to control the assembly process of the LbL films almost at will, by changing the nature of the assembled materials (building blocks), the assembly conditions (pH, ionic strength, tempera… ▽ More The fabrication of polyelectrolyte multilayer films (PEMs) using the Layer-by-Layer (LbL) method is one of the most versatile approaches for manufacturing functional surfaces. This is the result of the possibility to control the assembly process of the LbL films almost at will, by changing the nature of the assembled materials (building blocks), the assembly conditions (pH, ionic strength, temperature, etc.) or even by changing some other operational parameters which may impact in the structure and physico-chemical properties of the obtained multi-layered films. Therefore, the understanding of the impact of the above mentioned parameters on the assembly process of LbL materials plays a critical role in the potential use of the LbL method for the fabrication of new functional materials with technological interest. This review tries to provide a broad physico-chemical perspective to the study of the fabrication process of PEMs by the LbL method, which allows one to take advantage of the many possibilities offered for this approach on the fabrication of new functional nanomaterials. △ Less

Submitted 30 January, 2024; originally announced February 2024.

Comments: Published Paper

Journal ref: Advances in Colloid and Interface Science 282 (2020) 102197

Fabrication of robust capsules by sequential assembly of polyelectrolytes onto charged liposomes

Authors: Marta Ruano, Ana Mateos-Maroto, Francisco Ortega, Hernan Ritacco, Jose E. F. Rubio, Eduardo Guzman, Ramon G. Rubio

Abstract: This work presents a simply methodology for coating small unilamellar liposomes bearing different degrees of positive charge with polyelectrolyte multilayers using the sequential Layer-by-Layer (LbL) deposition method. The liposomes were made of mixtures of DOPC (1,2-dioleyl-sn-glycero-3-phosphocoline) and DODAB (dimethyl dioctadecyl ammonium bromide), and coated by alternated layers of the sodium… ▽ More This work presents a simply methodology for coating small unilamellar liposomes bearing different degrees of positive charge with polyelectrolyte multilayers using the sequential Layer-by-Layer (LbL) deposition method. The liposomes were made of mixtures of DOPC (1,2-dioleyl-sn-glycero-3-phosphocoline) and DODAB (dimethyl dioctadecyl ammonium bromide), and coated by alternated layers of the sodium salt of poly(4-styrenesulfonate), PSS, and poly(allylamine), PAH, as polyanion and polycations, respectively. The results shows that the zeta potential of the liposomes was not very sensitive to the mole fraction of DODAB in the membrane, XD, in the range 0.3< XD<0.8. We were able to coat the liposomes with up to four polymer bilayers. The growth of the capsules size was followed by dynamic light scattering, and in some cases by cryo-TEM, with good agreement between both techniques. The thickness of the layers, measured from the hydrodynamic radius of the coated liposome, depends on the polyelectrolyte used, so that the PSS layers adopt a much more packaged conformation than the PAH layers. An interesting finding is that the PSS amount needed to reach the isoelectric point of the capsules increases linearly with the charge density of the bare liposomes, whereas the amount of PAH does not depend on it. As expected, the preparation of the multilayers has to be done in such a way that when the system is close to the isoelectric point the capsules do not aggregate. For this, we dropped the polyelectrolyte solution quickly, fast stirring and using dilute liposome suspensions. The method is very flexible and not limited to liposomes or polyelectrolyte multilayers, also coatings containing charged nanoparticles can be easily made. △ Less

Submitted 27 January, 2024; originally announced January 2024.

Comments: Published

Journal ref: Langmuir 37 (2021), 6189-6200

Physico-chemical study of polymer mixtures formed by a polycation and a zwitterionic copolymer in aqueous solution and upon adsorption onto negatively charged surfaces

Authors: Laura Fernandez-Pena, Eduardo Guzman, Francisco Ortega, Lionel Bureau, Fabien Leonforte, Dandara Velasco, Ramon G. Rubio, Gustavo S. Luengo

Abstract: The adsorption of mixtures of charged polymers onto solid surfaces presents a big interest in different technological and industrial fields, and in particular, in cosmetics. This requires to deepen on the most fundamental physico-chemical bases governing the deposition, which is generally correlated to the interactions occurring in solution. This work explores the interaction in solution of model… ▽ More The adsorption of mixtures of charged polymers onto solid surfaces presents a big interest in different technological and industrial fields, and in particular, in cosmetics. This requires to deepen on the most fundamental physico-chemical bases governing the deposition, which is generally correlated to the interactions occurring in solution. This work explores the interaction in solution of model polymer mixtures formed by a cationic homopolymer (poly(diallyl-dimethyl-ammonium chloride), PDADMAC) and a zwitterionic copolymer (copolymer of acrylic acid, 3-Trimethylammonium propyl methacrylamide chloride and acrylamide, Merquat 2003), and the adsorption of such mixtures onto negatively charged surfaces. The analysis of the interactions occurring in solution between both polymers performed using dynamic light scattering (DLS), electrophoretic mobility and viscosity measurements, combined with the study of the deposition of the layers of mixtures containing different weight fractions of each polymer using ellipsometry and quartz crystal microbalance with dissipation monitoring (QCM-D) has shown that the interpolymer complexes formed in solution, and their composition, governs the deposition onto the solid surface and the tribological properties of the adsorbed layers as shown the Surface Force Apparatus (SFA) experiments, allowing for a control of the physico-chemical properties and structure of the layers. Furthermore, the use of Self Consistent Mean Fields Calculations (SCF) confirms the picture obtained from the experimental studies of the adsorbed layers, providing a prediction of the distribution of the polymer chains within the adsorbed layers. It is expected that this study can help on the understanding of the correlations existing between the behavior of future associations of innovative and eco-sustainable polymers and their adsorption processes onto solid surface. △ Less

Submitted 27 January, 2024; originally announced January 2024.

Comments: Published

Journal ref: Polymer 217 (2021) 123442

Study of the Liquid/Vapor Interfacial Properties of Concentrated Polyelectrolyte-Surfactant Mixtures Using Surface Tensiometry and Neutron Reflectometry: Equilibrium, Adsorption Kinetics and Dilational Rheology

Authors: Sara Llamas, Eduardo Guzman, Andrew Akanno, Laura Fernandez-Pena, Francisco Ortega, Richard A. Campbell, Reinhard Miller, Ramon G. Rubio

Abstract: The adsorption of mixtures of poly(diallyldimethylammonium chloride) (PDADMAC) and sodium N-lauroyl-N-methyltaurate (SLMT) at the water / vapor interface has been studied using drop profile tensiometry and neutron reflectometry. This study sheds light on the mechanisms involved in the adsorption of polyelectrolyte-oppositely charged surfactants by the characterization of both equilibrium and dynam… ▽ More The adsorption of mixtures of poly(diallyldimethylammonium chloride) (PDADMAC) and sodium N-lauroyl-N-methyltaurate (SLMT) at the water / vapor interface has been studied using drop profile tensiometry and neutron reflectometry. This study sheds light on the mechanisms involved in the adsorption of polyelectrolyte-oppositely charged surfactants by the characterization of both equilibrium and dynamics features associated with the layer formation at the fluid interface. The results are discussed in terms of an adsorption-equilibration of the interfacial layers as a two-step process: the initial stages involve the adsorption of polyelectrolyte-surfactant complexes formed in the bulk, and a subsequent stage involves reorganization of the interface. This work contributes to the understanding of the physico-chemical features of systems that undergo complex bulk and interfacial interactions with importance in science and technology. △ Less

Submitted 27 January, 2024; originally announced January 2024.

Comments: Publishes

Journal ref: Journal of Physical Chemistry C 2018, 122, 4419-4427

Equilibration of a Polycation-Anionic Surfactant Mixture at the Water-Vapor Interface

Authors: Andrew Akanno, Eduardo Guzman, Laura Fernandez-Pena, Sara Llamas, Francisco Ortega, Ramon G. Rubio

Abstract: The adsorption of concentrated polydiallyldimethylammonium chloride, PDADMAC-sodium lauryl ether sulfate (SLES) mixtures at the water-vapor interface has been studied by different surface tension techniques and dilational viscoelasticity measurements. This work tries to shed light on the way in which the formation of polyelectrolyte-surfactant complexes in the bulk affects the interfacial properti… ▽ More The adsorption of concentrated polydiallyldimethylammonium chloride, PDADMAC-sodium lauryl ether sulfate (SLES) mixtures at the water-vapor interface has been studied by different surface tension techniques and dilational viscoelasticity measurements. This work tries to shed light on the way in which the formation of polyelectrolyte-surfactant complexes in the bulk affects the interfacial properties of mixtures formed by a polycation and an oppositely charged surfactant. The results are discussed in terms of a two-step adsorption-equilibration of PDADMAC-SLES complexes at the interface, with the initial stages involving the diffusion of kinetically trapped aggregates formed in the bulk to the interface followed by the dissociation and spreading of such aggregates at the interface. This latter process becomes the main contribution to the surface tension decrease. This work aids our understanding of the most fundamental basis of the physicochemical behavior of concentrated polyelectrolyte-surfactant mixtures which present complex bulk and interfacial interactions with interest in both basic and applied sciences. △ Less

Submitted 27 January, 2024; originally announced January 2024.

Comments: Publishes

Journal ref: Langmuir 2018, 34, 25, 7455-7464

Effect of molecular structure of eco-friendly glycolipid biosurfactants on the adsorption of hair-care conditioning polymers

Authors: Laura Fernandez-Pena, Eduardo Guzman, Fabien Leonforte, Ana Serrano-Pueyo, Krzysztof Regulski, Lucie Tournier-Couturier, Francisco Ortega, Ramon G. Rubio, Gustavo S. Luengo

Abstract: Pseudo-binary mixtures of different glycolipids, four different rhamnolipids (RL) and an alkyl polyglucoside (APG), with poly(diallyl-dimethylammonium chloride) (PDADMAC) have been studied in relation to their adsorption onto negatively charged surfaces to shed light on the impact of the molecular structure of biodegradable surfactants from natural sources (instead of synthetic surfactant, such as… ▽ More Pseudo-binary mixtures of different glycolipids, four different rhamnolipids (RL) and an alkyl polyglucoside (APG), with poly(diallyl-dimethylammonium chloride) (PDADMAC) have been studied in relation to their adsorption onto negatively charged surfaces to shed light on the impact of the molecular structure of biodegradable surfactants from natural sources (instead of synthetic surfactant, such as sodium laureth sulfate) on the adsorption of hair-care formulations. For this purpose, the self-assembly of such mixtures in aqueous solution and their adsorption onto negatively charged surfaces mimicking the negative charge of damaged hair fibres have been studied using experiments and self-consistent field (SCF) calculations. The results show that the specific physico-chemical properties of the surfactants (charge, number of sugar rings present in surfactant structure and length of the hydrocarbon length) play a main role in the control of the adsorption process, with the adsorption efficiency and hydration being improved in relation to conventional sulfate-based systems for mixtures of PDADMAC and glycolipids with the shortest alkyl chains. SCF calculations and Energy Dispersive X-Ray Spectroscopy (EDS) analysis on real hair confirmed such observations. The results allow one to assume that the characteristic of the studied surfactants, especially rhamnolipids, conditions positively the adsorption potential of polyelectrolytes in our model systems. This study provides important insights on the mechanisms underlying the performance of more complex but natural and eco-friendly washing formulations. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: Published article

Journal ref: Colloids and Surfaces B: Biointerfaces 185 (2020) 110578

Towards understanding the behavior of polyelectrolyte surfactant mixtures at the water vapor interface closer to technologically relevant conditions

Authors: Sara Llamas, Laura Fernandez-Pena, Andrew Akanno, Eduardo Guzman, Victor Ortega, Francisco Ortega, Aurelio G. Csaky, Richard A. Campbell, Ramon G. Rubio

Abstract: Polyelectrolyte surfactant mixtures and their interactions with fluid interfaces are an important research field due to their use in technological applications. Most of the existing knowledge on these systems is based on models in which the polyelectrolyte concentration is around 50 times lower than that used in commercial formulations. The present work marks a step to close the gap on the underst… ▽ More Polyelectrolyte surfactant mixtures and their interactions with fluid interfaces are an important research field due to their use in technological applications. Most of the existing knowledge on these systems is based on models in which the polyelectrolyte concentration is around 50 times lower than that used in commercial formulations. The present work marks a step to close the gap on the understanding of their behavior under more practically relevant conditions. The adsorption of concentrated mixtures of poly(diallyldimethylammonium) chloride and sodium N lauroyl N methyltaurate at the water-vapor interface with a crude mixing protocol has been studied by different surface tension techniques, Brewster angle microscopy, neutron reflectometry, and several bulk characterization techniques. Kinetically trapped aggregates formed during mixing influence the interfacial morphology of mixtures produced in the equilibrium one phase region, yet fluctuations in the surface tension isotherm result depending on the tensiometric technique applied. At low bulk surfactant concentrations, the free surfactant concentration is very low, and the interfacial composition matches the trend of the bulk complexes, which is a behavior that has not been observed in studies on more dilute mixtures. Nevertheless, a transition to synergistic co-adsorption of complexes and free surfactant is observed at the higher bulk surfactant concentrations studied. This transition appears to be a special feature of these more concentrated mixtures, which deserves attention in future studies of systems with additional components. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: Published paper

Journal ref: Phys. Chem. Chem. Phys., 2018,20, 1395-1407

The Best Ends by the Best Means: Ethical Concerns in App Reviews

Authors: Lauren Olson, Neelam Tjikhoeri, Emitzá Guzmán

Abstract: This work analyzes ethical concerns found in users' app store reviews. We performed this study because ethical concerns in mobile applications (apps) are widespread, pose severe threats to end users and society, and lack systematic analysis and methods for detection and classification. In addition, app store reviews allow practitioners to collect users' perspectives, crucial for identifying softwa… ▽ More This work analyzes ethical concerns found in users' app store reviews. We performed this study because ethical concerns in mobile applications (apps) are widespread, pose severe threats to end users and society, and lack systematic analysis and methods for detection and classification. In addition, app store reviews allow practitioners to collect users' perspectives, crucial for identifying software flaws, from a geographically distributed and large-scale audience. For our analysis, we collected five million user reviews, developed a set of ethical concerns representative of user preferences, and manually labeled a sample of these reviews. We found that (1) users highly report ethical concerns about censorship, identity theft, and safety (2) user reviews with ethical concerns are longer, more popular, and lowly rated, and (3) there is high automation potential for the classification and filtering of these reviews. Our results highlight the relevance of using app store reviews for the systematic consideration of ethical concerns during software evolution. △ Less

Submitted 6 February, 2024; v1 submitted 19 January, 2024; originally announced January 2024.

A metric for characterizing the arm nonuse workspace in poststroke individuals using a robot arm

Authors: Nathaniel Dennler, Amelia Cain, Erica De Guzman, Claudia Chiu, Carolee J. Winstein, Stefanos Nikolaidis, Maja J. Matarić

Abstract: An over-reliance on the less-affected limb for functional tasks at the expense of the paretic limb and in spite of recovered capacity is an often-observed phenomenon in survivors of hemispheric stroke. The difference between capacity for use and actual spontaneous use is referred to as arm nonuse. Obtaining an ecologically valid evaluation of arm nonuse is challenging because it requires the obser… ▽ More An over-reliance on the less-affected limb for functional tasks at the expense of the paretic limb and in spite of recovered capacity is an often-observed phenomenon in survivors of hemispheric stroke. The difference between capacity for use and actual spontaneous use is referred to as arm nonuse. Obtaining an ecologically valid evaluation of arm nonuse is challenging because it requires the observation of spontaneous arm choice for different tasks, which can easily be influenced by instructions, presumed expectations, and awareness that one is being tested. To better quantify arm nonuse, we developed the Bimanual Arm Reaching Test with a Robot (BARTR) for quantitatively assessing arm nonuse in chronic stroke survivors. The BARTR is an instrument that utilizes a robot arm as a means of remote and unbiased data collection of nuanced spatial data for clinical evaluations of arm nonuse. This approach shows promise for determining the efficacy of interventions designed to reduce paretic arm nonuse and enhance functional recovery after stroke. We show that the BARTR satisfies the criteria of an appropriate metric for neurorehabilitative contexts: it is valid, reliable, and simple to use. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Comments: Accepted to Science Robotics at https://www.science.org/doi/10.1126/scirobotics.adf7723 on November 15th, 2023

Journal ref: Science Robotics 8, eadf7723(2023)

Efficient solution of the non-unitary time-dependent Schrodinger equation on a quantum computer with complex absorbing potential

Authors: Mariane Mangin-Brinet, Jing Zhang, Denis Lacroix, Edgar Andres Ruiz Guzman

Abstract: We explore the possibility of adding complex absorbing potential at the boundaries when solving the one-dimensional real-time Schrödinger evolution on a grid using a quantum computer with a fully quantum algorithm described on a $n$ qubit register. Due to the complex potential, the evolution mixes real- and imaginary-time propagation and the wave function can potentially be continuously absorbed d… ▽ More We explore the possibility of adding complex absorbing potential at the boundaries when solving the one-dimensional real-time Schrödinger evolution on a grid using a quantum computer with a fully quantum algorithm described on a $n$ qubit register. Due to the complex potential, the evolution mixes real- and imaginary-time propagation and the wave function can potentially be continuously absorbed during the time propagation. We use the dilation quantum algorithm to treat the imaginary-time evolution in parallel to the real-time propagation. This method has the advantage of using only one reservoir qubit at a time, that is measured with a certain success probability to implement the desired imaginary-time evolution. We propose a specific prescription for the dilation method where the success probability is directly linked to the physical norm of the continuously absorbed state evolving on the mesh. We expect that the proposed prescription will have the advantage of keeping a high probability of success in most physical situations. Applications of the method are made on one-dimensional wave functions evolving on a mesh. Results obtained on a quantum computer identify with those obtained on a classical computer. We finally give a detailed discussion on the complexity of implementing the dilation matrix. Due to the local nature of the potential, for $n$ qubits, the dilation matrix only requires $2^n$ CNOT and $2^n$ unitary rotation for each time step, whereas it would require of the order of $4^{n+1}$ C-NOT gates to implement it using the best-known algorithm for general unitary matrices. △ Less

Submitted 3 April, 2024; v1 submitted 27 November, 2023; originally announced November 2023.

Comments: 11 pages, accepted for publication in Quantum

Journal ref: Quantum 8, 1311 (2024)

Restoring symmetries in quantum computing using Classical Shadows

Authors: Edgar Andres Ruiz Guzman, Denis Lacroix

Abstract: We introduce a method to enforce some symmetries starting from a trial wave-function prepared on quantum computers that might not respect these symmetries. The technique eliminates the necessity for performing the projection on the quantum computer itself. Instead, this task is conducted as a post-processing step on the system's "Classical Shadow". Illustrations of the approach are given for the p… ▽ More We introduce a method to enforce some symmetries starting from a trial wave-function prepared on quantum computers that might not respect these symmetries. The technique eliminates the necessity for performing the projection on the quantum computer itself. Instead, this task is conducted as a post-processing step on the system's "Classical Shadow". Illustrations of the approach are given for the parity, particle number, and spin projectors that are of particular interest in interacting many-body systems. We compare the method with another classical post-processing technique based on direct measurements of the quantum register. We show that the present scheme can be competitive to predict observables on symmetry-restored states once optimization through derandomization is employed. The technique is illustrated through its application to compute the projected energy for the pairing model Hamiltonian. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: 14 pages, 8 figures

The role of turbulence in high-mass star formation: Subsonic and transonic turbulence are ubiquitously found at early stages

Authors: Chao Wang, Ke Wang, Feng-Wei Xu, Patricio Sanhueza, Hauyu Baobab Liu, Qizhou Zhang, Xing Lu, F. Fontani, Paola Caselli, Gemma Busquet, Jonathan C. Tan, Di Li, J. M. Jackson, Thushara Pillai, Paul T. P. Ho, Andrés E. Guzmán, Nannan Yue

Abstract: Context. Traditionally, supersonic turbulence is considered to be one of the most likely mechanisms to slow down the gravitational collapse in dense clumps, thereby enabling the formation of massive stars. However, several recent studies have raised differing points of view based on observations carried out with sufficiently high spatial and spectral resolution. These studies call for a re-evaluat… ▽ More Context. Traditionally, supersonic turbulence is considered to be one of the most likely mechanisms to slow down the gravitational collapse in dense clumps, thereby enabling the formation of massive stars. However, several recent studies have raised differing points of view based on observations carried out with sufficiently high spatial and spectral resolution. These studies call for a re-evaluation of the role turbulence plays in massive star-forming regions. Aims. Our aim is to study the gas properties, especially the turbulence, in a sample of massive star-forming regions with sufficient spatial and spectral resolution, which can both resolve the core fragmentation and the thermal line width. Methods. We observed NH3 metastable lines with the Very Large Array (VLA) to assess the intrinsic turbulence. Results. Analysis of the turbulence distribution histogram for 32 identified NH3 cores reveals the presence of three distinct components. Furthermore, our results suggest that (1) sub- and transonic turbulence is a prevalent (21 of 32) feature of massive star-forming regions and those cold regions are at early evolutionary stage. This investigation indicates that turbulence alone is insufficient to provide the necessary internal pressure required for massive star formation, necessitating further exploration of alternative candidates; and (2) studies of seven multi-core systems indicate that the cores within each system mainly share similar gas properties and masses. However, two of the systems are characterized by the presence of exceptionally cold and dense cores that are situated at the spatial center of each system. Our findings support the hub-filament model as an explanation for this observed distribution △ Less

Submitted 7 February, 2024; v1 submitted 27 October, 2023; originally announced October 2023.

Comments: 34 pages, 15 figures, 4 tables. Accepted for publication on A&A

Optical and Acoustic Phonons in Turbostratic and Cubic Boron Nitride Thin Films on Diamond Substrates

Authors: Erick Guzman, Fariborz Kargar, Avani Patel, Saurabh Vishwakarma, Dylan Wright, Richard B. Wilson, David J. Smith, Robert J. Nemanich, Alexander A. Balandin

Abstract: We report an investigation of the bulk optical, bulk acoustic, and surface acoustic phonons in thin films of turbostratic boron nitride (t-BN) and cubic boron nitride (c-BN) grown on B-doped polycrystalline and single-crystalline diamond (001) and (111) substrates. The characteristics of different types of phonons were determined using Raman and Brillouin-Mandelstam light scattering spectroscopies… ▽ More We report an investigation of the bulk optical, bulk acoustic, and surface acoustic phonons in thin films of turbostratic boron nitride (t-BN) and cubic boron nitride (c-BN) grown on B-doped polycrystalline and single-crystalline diamond (001) and (111) substrates. The characteristics of different types of phonons were determined using Raman and Brillouin-Mandelstam light scattering spectroscopies. The atomic structure of the films was determined using high-resolution transmission electron microscopy (HRTEM) and correlated with the Raman and Brillouin-Mandelstam spectroscopy data. The HRTEM analysis revealed that the cubic boron nitride thin films consisted of a mixture of c-BN and t-BN phases, with c-BN being the dominant phase. It was found that while visible Raman spectroscopy provided information for characterizing the t-BN phase, it faced challenges in differentiating the c-BN phase either due to the presence of high-density defects or the overlapping of the Raman features with those from the B-doped diamond substrates. In contrast, Brillouin-Mandelstam spectroscopy clearly distinguishes the bulk longitudinal and surface acoustic phonons of the c-BN thin films grown on diamond substrates. Additionally, the angle-dependent surface Brillouin-Mandelstam scattering data show the peaks associated with the Rayleigh surface acoustic waves, which have higher phase velocities in c-BN films on diamond (111) substrates. These findings provide valuable insights into the phonon characteristics of the c-BN and diamond interfaces and have important implications for the thermal management of electronic devices based on ultra-wide-band-gap materials. △ Less

Submitted 20 July, 2023; originally announced July 2023.

Comments: 27 pages; 4 figures

Along the Margins: Marginalized Communities' Ethical Concerns about Social Platforms

Authors: Lauren Olson, Emitzá Guzmán, Florian Kunneman

Abstract: In this paper, we identified marginalized communities' ethical concerns about social platforms. We performed this identification because recent platform malfeasance indicates that software teams prioritize shareholder concerns over user concerns. Additionally, these platform shortcomings often have devastating effects on marginalized populations. We first scraped 586 marginalized communities' subr… ▽ More In this paper, we identified marginalized communities' ethical concerns about social platforms. We performed this identification because recent platform malfeasance indicates that software teams prioritize shareholder concerns over user concerns. Additionally, these platform shortcomings often have devastating effects on marginalized populations. We first scraped 586 marginalized communities' subreddits, aggregated a dataset of their social platform mentions and manually annotated mentions of ethical concerns in these data. We subsequently analyzed trends in the manually annotated data and tested the extent to which ethical concerns can be automatically classified by means of natural language processing (NLP). We found that marginalized communities' ethical concerns predominantly revolve around discrimination and misrepresentation, and reveal deficiencies in current software development practices. As such, researchers and developers could use our work to further investigate these concerns and rectify current software flaws. △ Less

Submitted 6 February, 2024; v1 submitted 18 April, 2023; originally announced April 2023.

Quantum computing with and for many-body physics

Authors: Thomas Ayral, Pauline Besserve, Denis Lacroix, Edgar Andres Ruiz Guzman

Abstract: Quantum computing technologies are making steady progress. This has opened new opportunities for tackling problems whose complexity prevents their description on classical computers. A prototypical example of these complex problems are interacting quantum many-body systems: on the one hand, these systems are known to become rapidly prohibitive to describe using classical computers when their size… ▽ More Quantum computing technologies are making steady progress. This has opened new opportunities for tackling problems whose complexity prevents their description on classical computers. A prototypical example of these complex problems are interacting quantum many-body systems: on the one hand, these systems are known to become rapidly prohibitive to describe using classical computers when their size increases. On the other hand, these systems are precisely those which are used in the laboratory to build quantum computing platforms. This arguably makes them one of the most promising early use cases of quantum computing. In this review, we explain how quantum many-body systems are used to build quantum processors, and how, in turn, current and future quantum processors can be used to describe large many-body systems of fermions such as electrons and nucleons. The review includes an introduction to analog and digital quantum devices, the mapping of Fermi systems and their Hamiltonians onto qubit registers, as well as an overview of methods to access their static and dynamical properties. We also highlight some aspects related to entanglement, and touch on the description, influence and processing of decoherence in quantum devices. △ Less

Submitted 27 September, 2023; v1 submitted 8 March, 2023; originally announced March 2023.

Restoring broken symmetries using oracles

Authors: Edgar Andres Ruiz Guzman, Denis Lacroix

Abstract: We present a new method to perform variation after projection in many-body systems on quantum computers that does not require performing explicit projection. The technique employs the notion of ``oracle'', generally used in quantum search algorithms. We show how to construct the oracle and the projector associated with a symmetry operator. The procedure is illustrated for the parity, particle numb… ▽ More We present a new method to perform variation after projection in many-body systems on quantum computers that does not require performing explicit projection. The technique employs the notion of ``oracle'', generally used in quantum search algorithms. We show how to construct the oracle and the projector associated with a symmetry operator. The procedure is illustrated for the parity, particle number, and total spin symmetries. The oracle is used to restore symmetry by indirect measurements using a single ancillary qubit. An Illustration of the technique is made to obtain the approximate ground state energy for the pairing model Hamiltonian. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Symmetry breaking/symmetry preserving circuits and symmetry restoration on quantum computers: A quantum many-body perspective

Authors: Denis Lacroix, Edgar Andres Ruiz Guzman, Pooja Siwach

Abstract: We discuss here some aspects related to the symmetries of a quantum many-body problem when trying to treat it on a quantum computer. Several features related to symmetry conservation, symmetry breaking, and possible symmetry restoration are reviewed. After briefly discussing some of the standard symmetries relevant for many-particle systems, we discuss the advantage of encoding some symmetries dir… ▽ More We discuss here some aspects related to the symmetries of a quantum many-body problem when trying to treat it on a quantum computer. Several features related to symmetry conservation, symmetry breaking, and possible symmetry restoration are reviewed. After briefly discussing some of the standard symmetries relevant for many-particle systems, we discuss the advantage of encoding some symmetries directly in quantum ansätze, especially to reduce the quantum register size. It is, however, well-known that the use of symmetry-breaking states can also be a unique way to incorporate specific internal correlations when a spontaneous symmetry breaking occurs. These aspects are discussed in the quantum computing context. Ultimately, an accurate description of quantum systems can be achieved only when the initially broken symmetries are properly restored. We review several methods explored previously to perform symmetry restoration on a quantum computer, for instance, the ones based on symmetry filtering by quantum phase estimation and by an iterative independent set of Hadamard tests. We propose novel methods that pave the new directions to perform symmetry restoration, like those based on the purification of the state employing the linear combination of unitaries (LCU) approach. △ Less

Submitted 8 November, 2022; v1 submitted 24 August, 2022; originally announced August 2022.

Comments: Revides version, submitted to Eur. Phys. J. A in the topical issue on "Quantum computing in low-energy nuclear theory"

The Effects of Boron Doping on the Bulk and Surface Acoustic Phonons in Single-Crystal Diamond

Authors: Erick Guzman, Fariborz Kargar, Frank Angeles, Reza Vatan Meidanshahi, Timothy A. Grotjohn, Aaron Hardy, Matthias Muehle, Richard B. Wilson, Stephen Goodnik, Alexander A. Balandin

Abstract: We report the results of the investigation of bulk and surface acoustic phonons in the undoped and boron-doped single-crystal diamond films using the Brillouin-Mandelstam light scattering spectroscopy. The evolution of the optical phonons in the same set of samples was monitored with Raman spectroscopy. It was found that the frequency and the group velocity of acoustic phonons decrease non-monoton… ▽ More We report the results of the investigation of bulk and surface acoustic phonons in the undoped and boron-doped single-crystal diamond films using the Brillouin-Mandelstam light scattering spectroscopy. The evolution of the optical phonons in the same set of samples was monitored with Raman spectroscopy. It was found that the frequency and the group velocity of acoustic phonons decrease non-monotonically with the increasing boron doping concentration, revealing pronounced phonon softening. The change in the velocity of the shear horizontal and the high-frequency pseudo-longitudinal acoustic phonons in the degenerately doped diamond, as compared to the undoped diamond, was as large as ~15% and ~12%, respectively. As a result of boron doping, the velocity of the bulk longitudinal and transverse acoustic phonons decreased correspondingly. The frequency of the optical phonons was unaffected at low boron concentration but experienced a strong decrease at the high doping level. The density-functional-theory calculations of the phonon band structure for the pristine and highly-doped sample confirm the phonon softening as a result of boron doping in diamond. The obtained results have important implications for thermal transport in heavily doped diamond, which is a promising material for ultra-wide-band-gap electronics. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Comments: 27 pages; 5 figures

Enhancing Near-Field Optical Tweezers by Spin-to-Orbital Angular Momentum Conversion

Authors: Edgar Alonso Guzmán, Alejandro V. Arzola

Abstract: Near-field patterns of light provide a way to optically trap, deliver and sort single nanoscopic particles in a wide variety of applications in nanophotonics, microbiology and nanotechnology. Using rigorous electromagnetic theory, we investigate the forces and trapping performance of near-field optical tweezers carrying spin and orbital angular momenta. The trapping field is assumed to be generate… ▽ More Near-field patterns of light provide a way to optically trap, deliver and sort single nanoscopic particles in a wide variety of applications in nanophotonics, microbiology and nanotechnology. Using rigorous electromagnetic theory, we investigate the forces and trapping performance of near-field optical tweezers carrying spin and orbital angular momenta. The trapping field is assumed to be generated by a total internal reflection microscope objective at a glass-water interface in conditions where most of the transmitted light is evanescent. We find novel aspects of these tweezers, including the possibility to rotate and stably trap nanoscopic beads. More importantly, we show that, under near-field conditions, the contributions of of spin and orbital angular momenta to the rotation of small particles are almost equivalent, opening the possibility to cancel each other when they have opposite sign. We show that these conditions result in optimal optical trapping, giving rise to extremely effective optical tweezers for nanomanipulation, having both circular symmetry and relatively weak rotation. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 13 pages, 5 figures

Journal ref: Journal of the Optical Society of America B, 39 1233 (2022)

RaFoLa: A Rationale-Annotated Corpus for Detecting Indicators of Forced Labour

Authors: Erick Mendez Guzman, Viktor Schlegel, Riza Batista-Navarro

Abstract: Forced labour is the most common type of modern slavery, and it is increasingly gaining the attention of the research and social community. Recent studies suggest that artificial intelligence (AI) holds immense potential for augmenting anti-slavery action. However, AI tools need to be developed transparently in cooperation with different stakeholders. Such tools are contingent on the availability… ▽ More Forced labour is the most common type of modern slavery, and it is increasingly gaining the attention of the research and social community. Recent studies suggest that artificial intelligence (AI) holds immense potential for augmenting anti-slavery action. However, AI tools need to be developed transparently in cooperation with different stakeholders. Such tools are contingent on the availability and access to domain-specific data, which are scarce due to the near-invisible nature of forced labour. To the best of our knowledge, this paper presents the first openly accessible English corpus annotated for multi-class and multi-label forced labour detection. The corpus consists of 989 news articles retrieved from specialised data sources and annotated according to risk indicators defined by the International Labour Organization (ILO). Each news article was annotated for two aspects: (1) indicators of forced labour as classification labels and (2) snippets of the text that justify labelling decisions. We hope that our data set can help promote research on explainability for multi-class and multi-label text classification. In this work, we explain our process for collecting the data underpinning the proposed corpus, describe our annotation guidelines and present some statistical analysis of its content. Finally, we summarise the results of baseline experiments based on different variants of the Bidirectional Encoder Representation from Transformer (BERT) model. △ Less

Submitted 5 May, 2022; originally announced May 2022.

On the Fast Direct Solution of a Preconditioned Electromagnetic Integral Equation

Authors: Davide Consoli, Clément Henry, Alexandre Dély, Lyes Rahmouni, John Erik Ortiz Guzman, Tiffany L. Chhim, Simon B. Adrian, Adrien Merlini, Francesco P. Andriulli

Abstract: This work presents a fast direct solver strategy for electromagnetic integral equations in the high-frequency regime. The new scheme relies on a suitably preconditioned combined field formulation and results in a single skeleton form plus identity equation. This is obtained after a regularization of the elliptic spectrum through the extraction of a suitably chosen equivalent circulant problem. The… ▽ More This work presents a fast direct solver strategy for electromagnetic integral equations in the high-frequency regime. The new scheme relies on a suitably preconditioned combined field formulation and results in a single skeleton form plus identity equation. This is obtained after a regularization of the elliptic spectrum through the extraction of a suitably chosen equivalent circulant problem. The inverse of the system matrix is then obtained by leveraging the Woodbury matrix identity, the low-rank representation of the extracted part of the operator, and fast circulant algebra yielding a scheme with a favorable complexity and suitable for the solution of multiple right-hand sides. Theoretical considerations are accompanied by numerical results both of which are confirming and showing the practical relevance of the newly developed scheme. △ Less

Submitted 4 April, 2022; v1 submitted 24 March, 2022; originally announced March 2022.

ALMA-IMF I -- Investigating the origin of stellar masses: Introduction to the Large Program and first results

Authors: F. Motte, S. Bontemps, T. Csengeri, Y. Pouteau, F. Louvet, A. M. Stutz, N. Cunningham, A. López-Sepulcre, N. Brouillet, R. Galván-Madrid, A. Ginsburg, L. Maud, A. Men'shchikov, F. Nakamura, T. Nony, P. Sanhueza, R. H. Álvarez-Gutiérrez, M. Armante, T. Baug, M. Bonfand, G. Busquet, E. Chapillon, D. Díaz-González, M. Fernández-López, A. E. Guzmán , et al. (39 additional authors not shown)

Abstract: The ALMA-IMF Large Program imaged a total noncontiguous area of 53pc2, covering 15 extreme, nearby protoclusters of the Milky Way. They were selected to span relevant early protocluster evolutionary stages. Our 1.3mm and 3mm observations provide continuum images that are homogeneously sensitive to point-like cores with masses of 0.2 and 0.6Msun, respectively, with a matched spatial resolution of 2… ▽ More The ALMA-IMF Large Program imaged a total noncontiguous area of 53pc2, covering 15 extreme, nearby protoclusters of the Milky Way. They were selected to span relevant early protocluster evolutionary stages. Our 1.3mm and 3mm observations provide continuum images that are homogeneously sensitive to point-like cores with masses of 0.2 and 0.6Msun, respectively, with a matched spatial resolution of 2000au. We also detect lines that probe the protocluster structure, kinematics, chemistry, and feedback over scales from clouds to filaments to cores. We classify ALMA-IMF protoclusters as Young, Intermediate, or Evolved based on the amount of dense gas in the cloud that has potentially been impacted by HII regions. The ALMA-IMF catalog contains 700 cores that span a mass range of 0.15-250Msun at a typical size of 2100au. We show that this core sample has no significant distance bias and can be used to build core mass functions at similar physical scales. Significant gas motions, which we highlight here in the G353.41 region, are traced down to core scales and can be used to look for inflowing gas streamers and to quantify the impact of the possible associated core mass growth on the shape of the CMF with time. Our first analysis does not reveal any significant evolution of the matter concentration from clouds to cores or from the youngest to more evolved protoclusters, indicating that cloud dynamical evolution and stellar feedback have for the moment only had a slight effect on the structure of high-density gas in our sample. Furthermore, the first-look analysis of the line richness toward bright cores indicates that the survey encompasses several tens of hot cores, of which we highlight the most massive in the G351.77 cloud. Their homogeneous characterization can be used to constrain the emerging molecular complexity in protostars of high to intermediate masses. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Comments: 27 pages, 9 figures, accepted for publication by A&A

Journal ref: A&A 662, A8 (2022)

The ALMA Survey of 70 $μ$m Dark High-mass Clumps in Early Stages (ASHES). V. Deuterated Molecules in the 70 $μ$m dark IRDC G14.492-00.139

Authors: Takeshi Sakai, Patricio Sanhueza, Kenji Furuya, Ken'ichi Tatematsu, Shanghuo Li, Yuri Aikawa, Xing Lu, Qizhou Zhang, Kaho Morii, Fumitaka Nakamura, Hideaki Takemura, Natsuko Izumi, Tomoya Hirota, Andrea Silva, Andrés E. Guzmán, Nami Sakai, Satoshi Yamamoto

Abstract: We have observed the 70 $μ$m dark infrared dark cloud (IRDC) G14.492-00.139 in the N$_2$D$^+$ $J$=3--2, DCO$^+$ $J$=3--2, DCN $J$=3--2, and C$^{18}$O $J$=2--1 lines, using the Atacama Large Millimeter/submillimeter Array (ALMA) as part of the ALMA Survey of 70 $μ$m Dark High-mass Clumps in Early Stages (ASHES). We find that the spatial distribution is different among the observed emission from the… ▽ More We have observed the 70 $μ$m dark infrared dark cloud (IRDC) G14.492-00.139 in the N$_2$D$^+$ $J$=3--2, DCO$^+$ $J$=3--2, DCN $J$=3--2, and C$^{18}$O $J$=2--1 lines, using the Atacama Large Millimeter/submillimeter Array (ALMA) as part of the ALMA Survey of 70 $μ$m Dark High-mass Clumps in Early Stages (ASHES). We find that the spatial distribution is different among the observed emission from the deuterated molecular lines. The N$_2$D$^+$ emission traces relatively quiescent regions, while both the DCO$^+$ and DCN emission emanates mainly from regions with signs of active star-formation. In addition, the DCO$^+$/N$_2$D$^+$ ratio is found to be lower in several dense cores than in starless cores embedded in low-mass star-forming regions. By comparing the observational results with chemical model calculations, we discuss the origin of the low DCO$^+$/N$_2$D$^+$ ratio in this IRDC clump. The low DCO$^+$/N$_2$D$^+$ ratio can be explained if the temperature of the dense cores is in the range between the sublimation temperature of N$_2$ ($\sim$20 K) and CO ($\sim$25 K). The results suggest that the dense cores in G14.492-00.139 are warmer and denser than the dense cores in low-mass star-forming regions. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Comments: accepted for publication in ApJ

Accessing ground state and excited states energies in many-body system after symmetry restoration using quantum computers

Authors: E. A. Ruiz Guzman, D. Lacroix

Abstract: We explore the possibility to perform symmetry restoration with the variation after projection technique on a quantum computer followed by additional post-processing. The final goal is to develop configuration interaction techniques based on many-body trial states pre-optimized on a quantum computer. We show how the projection method used for symmetry restoration can prepare optimized states that… ▽ More We explore the possibility to perform symmetry restoration with the variation after projection technique on a quantum computer followed by additional post-processing. The final goal is to develop configuration interaction techniques based on many-body trial states pre-optimized on a quantum computer. We show how the projection method used for symmetry restoration can prepare optimized states that could then be employed as initial states for quantum or hybrid quantum-classical algorithms. We use the quantum phase estimation and quantum Krylov approaches for the post-processing. The latter method combined with the quantum variation after projection (Q-VAP) leads to very fast convergence towards the ground-state energy. The possibility to access excited states energies is also discussed. Illustrations of the different techniques are made using the pairing hamiltonian. △ Less

Submitted 25 November, 2021; originally announced November 2021.

Reconstructing Cosmic Polarization Rotation with ResUNet-CMB

Authors: Eric Guzman, Joel Meyers

Abstract: Cosmic polarization rotation, which may result from parity-violating new physics or the presence of primordial magnetic fields, converts $E$-mode polarization of the cosmic microwave background (CMB) into $B$-mode polarization. Anisotropic cosmic polarization rotation leads to statistical anisotropy in CMB polarization and can be reconstructed with quadratic estimator techniques similar to those d… ▽ More Cosmic polarization rotation, which may result from parity-violating new physics or the presence of primordial magnetic fields, converts $E$-mode polarization of the cosmic microwave background (CMB) into $B$-mode polarization. Anisotropic cosmic polarization rotation leads to statistical anisotropy in CMB polarization and can be reconstructed with quadratic estimator techniques similar to those designed for gravitational lensing of the CMB. At the sensitivity of upcoming CMB surveys, lensing-induced $B$-mode polarization will act as a limiting factor in the search for anisotropic cosmic polarization rotation, meaning that an analysis which incorporates some form of delensing will be required to improve constraints on the effect with future surveys. In this paper we extend the ResUNet-CMB convolutional neural network to reconstruct anisotropic cosmic polarization rotation in the presence of gravitational lensing and patchy reionization, and we show that the network simultaneously reconstructs all three effects with variance that is lower than that from the standard quadratic estimator nearly matching the performance of an iterative reconstruction method. △ Less

Submitted 19 January, 2022; v1 submitted 20 September, 2021; originally announced September 2021.

Comments: 11 pages, 7 figures. Updated to match published content. Code available from https://github.com/EEmGuzman/resunet-cmb

Journal ref: JCAP 01 (2022) 030

Magnetic Fields in Massive Star-Forming Regions (MagMaR) II. Tomography Through Dust and Molecular Line Polarization in NGC 6334I(N)

Authors: Paulo C. Cortes, Patricio Sanhueza, Martin Houde, Sergio Martin, Charles L. H. Hull, Josep M. Girart, Qizhou Zhang, Manuel Fernandez-Lopez, Luis A. Zapata, Ian W. Stephens, Hua-bai Li, Benjamin Wu, Fernando Olguin, Xing Lu, Andres E. Guzman, Fumitaka Nakamura

Abstract: Here, we report ALMA detections of polarized emission from dust, CS($J=5 \rightarrow 4$), and C$^{33}$S($J=5 \rightarrow 4$) toward the high-mass star-forming region NGC6334I(N). A clear ``hourglass'' magnetic field morphology was inferred from the polarized dust emission which is also directly seen from the polarized CS emission across velocity, where the polarization appears to be parallel to th… ▽ More Here, we report ALMA detections of polarized emission from dust, CS($J=5 \rightarrow 4$), and C$^{33}$S($J=5 \rightarrow 4$) toward the high-mass star-forming region NGC6334I(N). A clear ``hourglass'' magnetic field morphology was inferred from the polarized dust emission which is also directly seen from the polarized CS emission across velocity, where the polarization appears to be parallel to the field. By considering previous findings, the field retains a pinched shape which can be traced to clump length-scales from the envelope scales traced by ALMA, suggesting that the field is dynamically important across multiple length-scales in this region. The CS total intensity emission is found to be optically thick ($τ_{\mathrm{CS}} = 32 \pm 12$) while the C$^{33}$S emission appears to be optically thin ($τ_{\mathrm{C^{33}S}} = 0.1 \pm 0.01$). This suggests that sources of anisotropy other than large velocity gradients, i.e. anisotropies in the radiation field are required to explain the polarized emission from CS seen by ALMA. By using four variants of the Davis-Chandrasekhar-Fermi technique and the angle dispersion function methods (ADF), we obtain an average of estimates for the magnetic field strength onto the plane of the sky of $\left< \mathrm{B}_{\mathrm{pos}} \right> = 16$ mG from the dust and $\left< \mathrm{B}_{\mathrm{pos}} \right> \sim 2$ mG from the CS emission, where each emission traces different molecular hydrogen number densities. This effectively enables a tomographic view of the magnetic field within a single ALMA observation. △ Less

Submitted 19 September, 2021; originally announced September 2021.

Comments: Accepted for publication in ApJ

Tied & Reduced RNN-T Decoder

Authors: Rami Botros, Tara N. Sainath, Robert David, Emmanuel Guzman, Wei Li, Yanzhang He

Abstract: Previous works on the Recurrent Neural Network-Transducer (RNN-T) models have shown that, under some conditions, it is possible to simplify its prediction network with little or no loss in recognition accuracy (arXiv:2003.07705 [eess.AS], [2], arXiv:2012.06749 [cs.CL]). This is done by limiting the context size of previous labels and/or using a simpler architecture for its layers instead of LSTMs.… ▽ More Previous works on the Recurrent Neural Network-Transducer (RNN-T) models have shown that, under some conditions, it is possible to simplify its prediction network with little or no loss in recognition accuracy (arXiv:2003.07705 [eess.AS], [2], arXiv:2012.06749 [cs.CL]). This is done by limiting the context size of previous labels and/or using a simpler architecture for its layers instead of LSTMs. The benefits of such changes include reduction in model size, faster inference and power savings, which are all useful for on-device applications. In this work, we study ways to make the RNN-T decoder (prediction network + joint network) smaller and faster without degradation in recognition performance. Our prediction network performs a simple weighted averaging of the input embeddings, and shares its embedding matrix weights with the joint network's output layer (a.k.a. weight tying, commonly used in language modeling arXiv:1611.01462 [cs.LG]). This simple design, when used in conjunction with additional Edit-based Minimum Bayes Risk (EMBR) training, reduces the RNN-T Decoder from 23M parameters to just 2M, without affecting word-error rate (WER). △ Less

Submitted 15 September, 2021; originally announced September 2021.

Journal ref: Proc. Interspeech 2021, 4563-4567

The ALMA Survey of 70 $μ$m Dark High-mass Clumps in Early Stages (ASHES). IV. Star formation signatures in G023.477

Authors: Kaho Morii, Patricio Sanhueza, Fumitaka Nakamura, James M. Jackson, Shanghuo Li, Henrik Beuther, Qizhou Zhang, Siyi Feng, Daniel Tafoya, Andrés E. Guzmán, Natsuko Izumi, Takeshi Sakai, Xing Lu, Ken'ichi Tatematsu, Satoshi Ohashi, Andrea Silva, Fernando A. Olguin, Yanett Contreras

Abstract: With a mass of $\sim$1000 $M_\odot$ and a surface density of $\sim$0.5 g cm$^{-2}$, G023.477+0.114 also known as IRDC 18310-4 is an infrared dark cloud (IRDC) that has the potential to form high-mass stars and has been recognized as a promising prestellar clump candidate. To characterize the early stages of high-mass star formation, we have observed G023.477+0.114 as part of the ALMA Survey of 70… ▽ More With a mass of $\sim$1000 $M_\odot$ and a surface density of $\sim$0.5 g cm$^{-2}$, G023.477+0.114 also known as IRDC 18310-4 is an infrared dark cloud (IRDC) that has the potential to form high-mass stars and has been recognized as a promising prestellar clump candidate. To characterize the early stages of high-mass star formation, we have observed G023.477+0.114 as part of the ALMA Survey of 70 $μ$m Dark High-mass Clumps in Early Stages (ASHES). We have conducted $\sim$1."2 resolution observations with the Atacama Large Millimeter/submillimeter Array (ALMA) at 1.3 mm in dust continuum and molecular line emission. We identified 11 cores, whose masses range from 1.1 $M_\odot$ to 19.0 $M_\odot$. Ignoring magnetic fields, the virial parameters of the cores are below unity, implying that the cores are gravitationally bound. However, when magnetic fields are included, the prestellar cores are close to virial equilibrium, while the protostellar cores remain sub-virialized. Star formation activity has already started in this clump. Four collimated outflows are detected in CO and SiO. H$_2$CO and CH$_3$OH emission coincide with the high-velocity components seen in the CO and SiO emission. The outflows are randomly oriented for the natal filament and the magnetic field. The position-velocity diagrams suggest that episodic mass ejection has already begun even in this very early phase of protostellar formation. The masses of the identified cores are comparable to the expected maximum stellar mass that this IRDC could form (8-19 $M_\odot$). We explore two possibilities on how IRDC G023.477+0.114 could eventually form high-mass stars in the context of theoretical scenarios. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Comments: Accepted for publication in ApJ (September 1, 2021). 33 pages, 20 figures, and 5 tables

Gravity Driven Magnetic Field at ~1000 au Scales in High-mass Star Formation

Authors: Patricio Sanhueza, Josep Miquel Girart, Marco Padovani, Daniele Galli, Charles L. H. Hull, Qizhou Zhang, Paulo Cortes, Ian W. Stephens, Manuel Fernandez-Lopez, James M. Jackson, Pau Frau, Patrick M. Kock, Benjamin Wu, Luis A. Zapata, Fernando Olguin, Xing Lu, Andrea Silva, Ya-Wen Tang, Takeshi Sakai, Andres E. Guzman, Ken'ichi Tatematsu, Fumitaka Nakamura, Huei-Ru Vivien Chen

Abstract: A full understanding of high-mass star formation requires the study of one of the most elusive components of the energy balance in the interstellar medium: magnetic fields. We report ALMA 1.2 mm, high-resolution (700 au) dust polarization and molecular line observations of the rotating hot molecular core embedded in the high-mass star-forming region IRAS 18089-1732. The dust continuum emission and… ▽ More A full understanding of high-mass star formation requires the study of one of the most elusive components of the energy balance in the interstellar medium: magnetic fields. We report ALMA 1.2 mm, high-resolution (700 au) dust polarization and molecular line observations of the rotating hot molecular core embedded in the high-mass star-forming region IRAS 18089-1732. The dust continuum emission and magnetic field morphology present spiral-like features resembling a whirlpool. The velocity field traced by the H13CO+ (J=3-2) transition line reveals a complex structure with spiral filaments that are likely infalling and rotating, dragging the field with them. We have modeled the magnetic field and find that the best model corresponds to a weakly magnetized core with a mass-to-magnetic-flux ratio (lambda) of 8.38. The modeled magnetic field is dominated by a poloidal component, but with an important contribution from the toroidal component that has a magnitude of 30% of the poloidal component. Using the Davis-Chandrasekhar-Fermi method, we estimate a magnetic field strength of 3.5 mG. At the spatial scales accessible to ALMA, an analysis of the energy balance of the system indicates that gravity overwhelms turbulence, rotation, and the magnetic field. We show that high-mass star formation can occur in weakly magnetized environments, with gravity taking the dominant role. △ Less

Submitted 7 June, 2021; originally announced June 2021.

Comments: Accepted for publications in ApJL (12 pages, 5 figures, Appendix)

Calculation of generating function in many-body systems with quantum computers: technical challenges and use in hybrid quantum-classical methods

Authors: Edgar Andres Ruiz Guzman, Denis Lacroix

Abstract: The generating function of a Hamiltonian $H$ is defined as $F(t)=\langle e^{-itH}\rangle$, where $t$ is the time and where the expectation value is taken on a given initial quantum state. This function gives access to the different moments of the Hamiltonian $\langle H^{K}\rangle$ at various orders $K$. The real and imaginary parts of $F(t)$ can be respectively evaluated on quantum computers using… ▽ More The generating function of a Hamiltonian $H$ is defined as $F(t)=\langle e^{-itH}\rangle$, where $t$ is the time and where the expectation value is taken on a given initial quantum state. This function gives access to the different moments of the Hamiltonian $\langle H^{K}\rangle$ at various orders $K$. The real and imaginary parts of $F(t)$ can be respectively evaluated on quantum computers using one extra ancillary qubit with a set of measurement for each value of the time $t$. The low cost in terms of qubits renders it very attractive in the near term period where the number of qubits is limited. Assuming that the generating function can be precisely computed using quantum devices, we show how the information content of this function can be used a posteriori on classical computers to solve quantum many-body problems. Several methods of classical post-processing are illustrated with the aim to predict approximate ground or excited state energies and/or approximate long-time evolutions. This post-processing can be achieved using methods based on the Krylov space and/or on the $t$-expansion approach that is closely related to the imaginary time evolution. Hybrid quantum-classical calculations are illustrated in many-body interacting systems using the pairing and Fermi-Hubbard models. △ Less

Submitted 25 November, 2021; v1 submitted 16 April, 2021; originally announced April 2021.

Comments: 15 figures, 10 pages, article original title "Predicting ground state, excited states and long-time evolution of many-body systems from short-time evolution on a quantum computer"

Magnetic Fields in Massive Star-Forming Regions (MagMaR) I. Linear Polarized Imaging of the UCHII Region G5.89-0.39

Authors: M. Fernández-López, P. Sanhueza, L. A. Zapata, I. Stephens, C. Hull, Q. Zhang, J. M. Girart, P. M. Koch, P. Cortés, A. Silva, K. Tatematsu, F. Nakamura, A. E. Guzmán, Q. Nguyen Luong, E. Guzmán Ccolque, Y. -W. Tang, V. Chen

Abstract: We report 1.2 mm polarized continuum emission observations carried out with the Atacama Large Millimeter/submillimeter Array (ALMA) toward the high-mass star formation region G5.89-0.39. The observations show a prominent 0.2 pc north-south filamentary structure. The UCHII in G5.89-0.39 breaks the filament in two pieces. Its millimeter emission shows a dusty belt with a mass of 55-115 M$_{\odot}$ a… ▽ More We report 1.2 mm polarized continuum emission observations carried out with the Atacama Large Millimeter/submillimeter Array (ALMA) toward the high-mass star formation region G5.89-0.39. The observations show a prominent 0.2 pc north-south filamentary structure. The UCHII in G5.89-0.39 breaks the filament in two pieces. Its millimeter emission shows a dusty belt with a mass of 55-115 M$_{\odot}$ and 4,500 au in radius, surrounding an inner part comprising mostly ionized gas with a dust emission only accounting about 30% of the total millimeter emission. We also found a lattice of convex arches which may be produced by dragged dust and gas from the explosive dispersal event involving the O5 Feldt's star. The north-south filament has a mass between 300-600 M$_{\odot}$ and harbours a cluster of about 20 millimeter envelopes with a median size and mass of 1700 au and 1.5 M$_{\odot}$, respectively, some of which are already forming protostars. We interpret the polarized emission in the filament as mainly coming from magnetically aligned dust grains. The polarization fraction is ~4.4% in the filaments and 2.1% at the shell. The magnetic fields are along the North Filament and perpendicular to the South Filament. In the Central Shell, the magnetic fields are roughly radial in a ring surrounding the dusty belt between 4,500 and 7,500 au, similar to the pattern recently found in the surroundings of Orion BN/KL. This may be an independent observational signpost of explosive dispersal outflows and should be further investigated in other regions. △ Less

Submitted 27 April, 2021; v1 submitted 7 April, 2021; originally announced April 2021.

Comments: Accepted in ApJ. 26 pages, 17 figures

The ALMA Survey of 70$μ$m Dark High-mass Clumps in Early Stages (ASHES) III. A Young Molecular Outflow Driven by a Decelerating Jet

Authors: Daniel Tafoya, Patricio Sanhueza, Qizhou Zhang, Shanghuo Li, Andrés E. Guzmán, Andrea Silva, Eduardo de la Fuente, Xing Lu, Kaho Morii, Ken'ichi Tatematsu, Yanett Contreras, Natsuko Izumi, James M. Jackson, Fumitaka Nakamura, Takeshi Sakai

Abstract: We present a spatio-kinematical analysis of the CO~($J$=2$\rightarrow$1) line emission, observed with the Atacama Large Millimter/submillimter Array (ALMA), of the outflow associated with the most massive core, ALMA1, in the 70 $μ$m dark clump G010.991$-$00.082. The position-velocity (P-V) diagram of the molecular outflow exhibits a peculiar $\mathsf{S}$-shaped morphology that has not been seen in… ▽ More We present a spatio-kinematical analysis of the CO~($J$=2$\rightarrow$1) line emission, observed with the Atacama Large Millimter/submillimter Array (ALMA), of the outflow associated with the most massive core, ALMA1, in the 70 $μ$m dark clump G010.991$-$00.082. The position-velocity (P-V) diagram of the molecular outflow exhibits a peculiar $\mathsf{S}$-shaped morphology that has not been seen in any other star forming region. We propose a spatio-kinematical model for the bipolar molecular outflow that consists of a decelerating high-velocity component surrounded by a slower component whose velocity increases with distance from the central source. The physical interpretation of the model is in terms of a jet that decelerates as it entrains material from the ambient medium, which has been predicted by calculations and numerical simulations of molecular outflows in the past. One side of the outflow is shorter and shows a stronger deceleration, suggesting that the medium through which the jet moves is significantly inhomogeneous. The age of the outflow is estimated to be $τ$$\approx$1300 years, after correction for a mean inclination of the system of $\approx$57$^{\circ}$. △ Less

Submitted 6 April, 2021; originally announced April 2021.

Comments: 15 pages, 7 figures. Accepted for publication in ApJ

Mining Energy-Related Practices in Robotics Software

Authors: Michel Albonico, Ivano Malavolta, Gustavo Pinto, Emitza Guzman, Katerina Chinnappan, Patricia Lago

Abstract: Robots are becoming more and more commonplace in many industry settings. This successful adoption can be partly attributed to (1) their increasingly affordable cost and (2) the possibility of developing intelligent, software-driven robots. Unfortunately, robotics software consumes significant amounts of energy. Moreover, robots are often battery-driven, meaning that even a small energy improvement… ▽ More Robots are becoming more and more commonplace in many industry settings. This successful adoption can be partly attributed to (1) their increasingly affordable cost and (2) the possibility of developing intelligent, software-driven robots. Unfortunately, robotics software consumes significant amounts of energy. Moreover, robots are often battery-driven, meaning that even a small energy improvement can help reduce its energy footprint and increase its autonomy and user experience. In this paper, we study the Robot Operating System (ROS) ecosystem, the de-facto standard for developing and prototyping robotics software. We analyze 527 energy-related data points (including commits, pull-requests, and issues on ROS-related repositories, ROS-related questions on StackOverflow, ROS Discourse, ROS Answers, and the official ROS Wiki). Our results include a quantification of the interest of roboticists on software energy efficiency, 10 recurrent causes, and 14 solutions of energy-related issues, and their implied trade-offs with respect to other quality attributes. Those contributions support roboticists and researchers towards having energy-efficient software in future robotics projects. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 11 pages

Journal ref: MSR 2021

Does Culture Matter? Impact of Individualism and Uncertainty Avoidance on App Reviews

Authors: Ricarda Anna-Lena Fischer, Rita Walczuch, Emitza Guzman

Abstract: Mobile applications are often used by an international audience and therefore receive a high daily amount of user reviews from various countries. Previous work found evidence that app store reviews contain helpful information for software evolution processes. However, the cultural diversity of the reviews and its consequences on specific user feedback characteristics has only been researched to a… ▽ More Mobile applications are often used by an international audience and therefore receive a high daily amount of user reviews from various countries. Previous work found evidence that app store reviews contain helpful information for software evolution processes. However, the cultural diversity of the reviews and its consequences on specific user feedback characteristics has only been researched to a limited extent so far. In this paper, we examine the influence of two cultural dimensions, Individualism and Uncertainty Avoidance on user feedback in Apple app store reviews written in different languages. For this purpose, we collected 647,141 reviews from eight countries and written in five languages over a period of six months. We then used manual content analysis and automated processing to examine a sample of 3,120 reviews. The results show that there is a statistically significant influence of Individualism and Uncertainty Avoidance on user feedback characteristics. The results of this study will help researchers and practitioners to reduce algorithm bias caused by less diversified training and test data and to raise awareness of the importance of analyzing diversified user feedback. △ Less

Submitted 7 March, 2021; v1 submitted 11 February, 2021; originally announced February 2021.

Digging into the Interior of Hot Cores with ALMA (DIHCA). I. Dissecting the High-mass Star-Forming Core G335.579-0.292 MM1

Authors: Fernando A. Olguin, Patricio Sanhueza, Andrés E. Guzmán, Xing Lu, Kazuya Saigo, Qizhou Zhang, Andrea Silva, Huei-Ru Vivien Chen, Shanghuo Li, Satoshi Ohashi, Fumitaka Nakamura, Takeshi Sakai, Benjamin Wu

Abstract: We observed the high-mass star-forming region G335.579-0.292 with the Atacama Large Millimeter/submillimeter Array (ALMA) at 226 GHz with an angular resolution of 0.3'' ($\sim 1000$ au resolution at the source distance). G335.579-0.292 hosts one of the most massive cores in the Galaxy (G335-MM1). The continuum emission shows that G335-MM1 fragments into at least five sources, while molecular line… ▽ More We observed the high-mass star-forming region G335.579-0.292 with the Atacama Large Millimeter/submillimeter Array (ALMA) at 226 GHz with an angular resolution of 0.3'' ($\sim 1000$ au resolution at the source distance). G335.579-0.292 hosts one of the most massive cores in the Galaxy (G335-MM1). The continuum emission shows that G335-MM1 fragments into at least five sources, while molecular line emission is detected in two of the continuum sources (ALMA1 and ALMA3). We found evidence of large and small scale infall in ALMA1 revealed by an inverse P-Cygni profile and the presence of a blue-shifted spot at the center of the first moment map of the CH$_3$CN emission. In addition, hot gas expansion in the innermost region is unveiled by a red-shifted spot in the first moment map of HDCO and (CH$_3$)$_2$CO (both with $E_u > 1100$ K). Our modeling reveals that this expansion motion originates close to the central source, likely due to reversal of the accretion flow induced by the expansion of the HII region, while infall and rotation motions originate in the outer regions. ALMA3 shows clear signs of rotation, with a rotation axis inclination with respect to the line of sight close to $90^\circ$, and a system mass (disk + star) in the range of 10-30 M$_\odot$. △ Less

Submitted 20 January, 2021; originally announced January 2021.

Comments: 15 pages, 12 figures, 3 tables. Accepted for publication in ApJ

Reconstructing Patchy Reionization with Deep Learning

Authors: Eric Guzman, Joel Meyers

Abstract: The precision anticipated from next-generation cosmic microwave background (CMB) surveys will create opportunities for characteristically new insights into cosmology. Secondary anisotropies of the CMB will have an increased importance in forthcoming surveys, due both to the cosmological information they encode and the role they play in obscuring our view of the primary fluctuations. Quadratic esti… ▽ More The precision anticipated from next-generation cosmic microwave background (CMB) surveys will create opportunities for characteristically new insights into cosmology. Secondary anisotropies of the CMB will have an increased importance in forthcoming surveys, due both to the cosmological information they encode and the role they play in obscuring our view of the primary fluctuations. Quadratic estimators have become the standard tools for reconstructing the fields that distort the primary CMB and produce secondary anisotropies. While successful for lensing reconstruction with current data, quadratic estimators will be sub-optimal for the reconstruction of lensing and other effects at the expected sensitivity of the upcoming CMB surveys. In this paper we describe a convolutional neural network, ResUNet-CMB, that is capable of the simultaneous reconstruction of two sources of secondary CMB anisotropies, gravitational lensing and patchy reionization. We show that the ResUNet-CMB network significantly outperforms the quadratic estimator at low noise levels and is not subject to the lensing-induced bias on the patchy reionization reconstruction that would be present with a straightforward application of the quadratic estimator. △ Less

Submitted 20 August, 2021; v1 submitted 4 January, 2021; originally announced January 2021.

Comments: 14 pages, 9 figures. Updated to match published version. Code available from https://github.com/EEmGuzman/resunet-cmb

Journal ref: Phys. Rev. D 104, 043529 (2021)