-
Dense strontium hexaferrite-based permanent magnet composites assisted by cold sintering process
Authors:
Eduardo García-Martín,
Cecilia Granados-Miralles,
Sandra Ruiz-Gómez,
Lucas Pérez,
Adolfo del Campo,
Jesús Carlos Guzmán-Mínguez,
César de Julián Fernández,
Adrián Quesada,
José F. Fernández,
Aida Serrano
Abstract:
The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their extraction and, on the other hand, the sector is potentially dependent on China. Therefore, investigation is required both in the development of rare-earth-free p…
▽ More
The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their extraction and, on the other hand, the sector is potentially dependent on China. Therefore, investigation is required both in the development of rare-earth-free permanent magnets and in sintering processes that enable their greener fabrication with attractive magnetic properties at a more competitive price. This work presents the use of a cold sintering process (CSP) followed by a post-annealing at 1100 °C as a new way to sinter composite permanent magnets based on strontium ferrite (SFO). Composites that incorporate a percentage < 10% of an additional magnetic phase have been prepared and the morphological, structural and magnetic properties have been evaluated after each stage of the process. CSP induces a phase transformation of SFO in the composites, which is partially recovered by the post-thermal treatment improving the relative density to 92% and the magnetic response of the final magnets with a coercivity of up to 3.0 kOe. Control of the magnetic properties is possible through the composition and the grain size in the sintered magnets. These attractive results show the potential of the sintering approach as an alternative to develop modern rare-earth-free composite permanent magnets.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Greener processing of SrFe$_{12}$O$_{19}$ ceramic permanent magnets by two-step sintering
Authors:
J. C. Guzmán-Mínguez,
V. Fuertes,
C. Granados-Miralles,
J. F. Fernández,
A. Quesada
Abstract:
With an annual production amounting to 800 kilotons, ferrite magnets constitute the largest family of permanent magnets in volume, a demand that will only increase as a consequence of the rare-earth crisis. With the global goal of building a climate-resilient future, strategies towards a greener manufacturing of ferrite magnets are of great interest. A new ceramic processing route for obtaining de…
▽ More
With an annual production amounting to 800 kilotons, ferrite magnets constitute the largest family of permanent magnets in volume, a demand that will only increase as a consequence of the rare-earth crisis. With the global goal of building a climate-resilient future, strategies towards a greener manufacturing of ferrite magnets are of great interest. A new ceramic processing route for obtaining dense Sr-ferrite sintered magnets is presented here. Instead of the usual sintering process employed nowadays in ferrite magnet manufacturing that demands long dwell times, a shorter two-step sintering is designed to densify the ferrite ceramics. As a result of these processes, dense SrFe$_{12}$O$_{19}$ ceramic magnets with properties comparable to state-of-the-art ferrite magnets are obtained. In particular, the SrFe$_{12}$O$_{19}$ magnet containing 0.2% PVA and 0.6% wt SiO$_2$ reaches a coercivity of 164 kA/m along with a 93% relative density. A reduction of 31% in energy consumption is achieved in the thermal treatment with respect to conventional sintering, which could lead to energy savings for the industry of the order of 7.109 kWh per year.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Quantifying Li-content for compositional tailoring of lithium ferrite ceramics
Authors:
C. Granados-Miralles,
A. Serrano,
P. Prieto,
J. Guzmán-Mínguez,
J. E. Prieto,
A. M. Friedel,
E. García-Martín,
J. F. Fernández,
A. Quesada
Abstract:
Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest damping ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in tur…
▽ More
Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest damping ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in turn, the performance of functional devices based on these materials. Despite this, lithium content is rarely accurately quantified, as a result of the low number of electrons in Li hindering its identification by means of routine materials characterization methods. In the present work, magnetic lithium ferrite powders with Li:Fe ratios of 1:1, 1:3 and 1:5 have been synthesized, successfully obtaining phase-pure materials (LiFeO2 and LiFe5O8), as well as a controlled mixture of both phases. The powders have been compacted and subsequently sintered by thermal treatment (Tmax = 1100 °C) to fabricate dense pellets which preserve the original Li:Fe ratios. Li-content on both powders and pellets has been determined by two independent methods: (i) Rutherford backscattering spectroscopy combined with nuclear reaction analysis and (ii) Rietveld analysis of powder X-ray diffraction data. With good agreement between both techniques, it has been confirmed that the Li:Fe ratios employed in the synthesis are maintained in the sintered ceramics. The same conclusion is drawn from spatially-resolved confocal Raman microscopy experiments on regions of a few microns. Field emission scanning electron microscopy has evidenced the substantial grain growth taking place during the sintering process - mean particle sizes rise from about 600 nm in the powders up to 3.8(6) um for dense LiFeO2 and 10(2) um for LiFe5O8 ceramics.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
FeCo Nanowire-Strontium Ferrite Powder Composites for Permanent Magnets with High-Energy Products
Authors:
J. C. Guzmán-Mínguez,
S. Ruiz-Gómez,
L. M. Vicente-Arche,
C. Granados-Miralles,
C. Fernández-González,
F. Mompeán,
M. García-Hernández,
S. Erohkin,
D. Berkov,
D. Mishra,
C. de Julián Fernández,
J. F. Fernández,
L. Pérez,
A. Quesada
Abstract:
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameter…
▽ More
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameters between 30 and 100 nm and length of at least 2 μm are fabricated by electrodeposition. The oriented as-synthesized nanowires show remanence ratios above 0.76 and coercivities above 199 kA/m and resist core oxidation up to 300 °C due to the existence of a > 8 nm thin oxide passivating shell. In the second step, a composite powder is fabricated by mixing the nanowires with hexaferrite particles. After the optimal nanowire diameter and composite composition are selected, a bonded magnet is produced. The resulting magnet presents a 20% increase in remanence and an enhancement of the energy product of 48% with respect to a pure hexaferrite (strontium ferrite) magnet. These results put nanowire-ferrite composites at the forefront as candidate materials for alternative magnets for substitution of rare earths in applications that operate with moderate magnet performance.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Remanence Increase in SrFe$_{12}$O$_{19}$/Fe Exchange-Decoupled Hard-Soft Composite Magnets Owing to Dipolar Interactions
Authors:
Jesús Carlos Guzmán-Mínguez,
Cecilia Granados-Miralles,
Patrick Kuntschke,
César de Julián Fernández,
Sergey Erokhin,
Dmitry Berkov,
Thomas Schliesch,
Jose Francisco Fernández,
Adrián Quesada
Abstract:
In the search for improved permanent magnets, fueled by the geostrategic and environmental issues associated with rare-earth-based magnets, magnetically hard (high anisotropy)-soft (high magnetization) composite magnets hold promise as alternative magnets that could replace modern permanent magnets, such as rare-earth-based and ceramic magnets, in certain applications. However, so far, the magneti…
▽ More
In the search for improved permanent magnets, fueled by the geostrategic and environmental issues associated with rare-earth-based magnets, magnetically hard (high anisotropy)-soft (high magnetization) composite magnets hold promise as alternative magnets that could replace modern permanent magnets, such as rare-earth-based and ceramic magnets, in certain applications. However, so far, the magnetic properties reported for hard-soft composites have been underwhelming. Here, an attempt to further understand the correlation between magnetic and microstructural properties in strontium ferrite-based composites, hard SrFe$_{12}$O$_{19}$ (SFO) ceramics with different contents of Fe particles as soft phase, both in powder and in dense injection molded magnets, is presented. In addition, the influence of soft phase particle dimension, in the nano- and micron-sized regimes, on these properties is studied. While Fe and SFO are not exchange-coupled in our magnets, a remanence that is higher than expected is measured. In fact, in composite injection molded anisotropic (magnetically oriented) magnets, remanence is improved by 2.4% with respect to a pure ferrite identical magnet. The analysis of the experimental results in combination with micromagnetic simulations allows us to establish that the type of interaction between hard and soft phases is of a dipolar nature, and is responsible for the alignment of a fraction of the soft spins with the magnetization of the hard. The mechanism unraveled in this work has implications for the development of novel hard-soft permanent magnets.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Influence of the growth conditions on the magnetism of SrFe$_{12}$O$_{19}$ thin films and the behavior of Co / SrFe$_{12}$O$_{19}$ bilayers
Authors:
G. D. Soria,
J. F. Marco,
A. Mandziak,
S. Sánchez-Cortés,
M. Sánchez-Arenillas,
J. E. Prieto,
J. Dávalos,
M. Foerster,
L. Aballe,
J. López-Sánchez,
J. C. Guzmán-Mínguez,
C. Granados-Miralles,
J. de la Figuera,
A. Quesada
Abstract:
SrFe$_{12}$O$_{19}$ (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputteri…
▽ More
SrFe$_{12}$O$_{19}$ (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputtering power and the thickness of the films. Additionally, the coupling between the SFO films and a deposited cobalt overlayer was studied by means of synchrotron-based spectromicroscopy techniques. A structural coupling at the SFO/Co interface is suggested to account for the expetimental observations. Micromagnetic simulations were performed in order to reproduce the experimental behaviour of the system.
△ Less
Submitted 8 May, 2020; v1 submitted 19 February, 2020;
originally announced February 2020.
