Suppression of Phase Separation in AlGaInAs Compositionally Graded Buffers for 1550 nm Photovoltaic Converters on GaAs
Authors:
Kevin L. Schulte,
John F. Geisz,
Harvey L. Guthrey,
Ryan M. France,
Edgard Winter da Costa,
Myles A. Steiner
Abstract:
We investigate strategies to suppress phase separation and reduce threading dislocation densities (TDD) in AlGaInAs compositionally graded buffers (CGBs) that span the lattice constant range from GaAs to InP. Combining results from high resolution x-ray diffraction, cathodoluminescence, transmission electron microscopy, and photovoltaic device measurements, we correlate choices of epitaxial growth…
▽ More
We investigate strategies to suppress phase separation and reduce threading dislocation densities (TDD) in AlGaInAs compositionally graded buffers (CGBs) that span the lattice constant range from GaAs to InP. Combining results from high resolution x-ray diffraction, cathodoluminescence, transmission electron microscopy, and photovoltaic device measurements, we correlate choices of epitaxial growth conditions with the defect structure of the CGBs and subsequent device performance. Both the use of substrates with high misorientation off (100) towards the (111)A plane and Zn-doping instead of Si-doping are shown to suppress phase separation and reduce TDD. We demonstrate a 0.74 eV GaInAs device grown on a (411)A GaAs substrate using a Zn-doped AlGaInAs CGB with TDD = 3.5 +/- 0.2 x 106 cm^-2 that has a bandgap-open circuit voltage offset of only 0.434 V measured under the AM1.5G solar spectrum. We characterized this device under high-intensity irradiance from a 1570 nm laser and measured a 31.9% peak efficiency laser power conversion efficiency at 3.6 W/cm2. These results provide a roadmap to the manufacture of laser- and thermal-power conversion devices with the performance and cost-effectiveness needed to drive adoption of these technologies at scale.
△ Less
Submitted 5 November, 2024;
originally announced November 2024.
Sub-0.6 eV Inverted Metamorphic GaInAs Cells Grown on InP and GaAs Substrates for Thermophotovoltaics and Laser Power Conversion
Authors:
Kevin L. Schulte,
Daniel J. Friedman,
Titilope Dada,
Harvey L. Guthrey,
Edgard Winter da Costa,
Eric J. Tervo,
Ryan M. France,
John F. Geisz,
Myles A. Steiner
Abstract:
We present inverted metamorphic Ga0.3In0.7As photovoltaic converters with sub-0.60 eV bandgaps grown on InP and GaAs substrates. The compositionally graded buffers in these devices have threading dislocation densities of 1.3x10^6 cm^-2 and 8.9x10^6 cm^-2 on InP and GaAs, respectively. The devices generate open-circuit voltages of 0.386 V and 0.383 V, respectively, at a current density of ~10 A/cm^…
▽ More
We present inverted metamorphic Ga0.3In0.7As photovoltaic converters with sub-0.60 eV bandgaps grown on InP and GaAs substrates. The compositionally graded buffers in these devices have threading dislocation densities of 1.3x10^6 cm^-2 and 8.9x10^6 cm^-2 on InP and GaAs, respectively. The devices generate open-circuit voltages of 0.386 V and 0.383 V, respectively, at a current density of ~10 A/cm^2, yielding bandgap-voltage offsets of 0.20 and 0.21 V. We measured their broadband reflectance and used it to estimate thermophotovoltaic efficiency. The InP-based cell is estimated to yield 1.09 W/cm^2 at 1100 degrees C vs. 0.92 W/cm^2 for the GaAs-based cell, with efficiencies of 16.8 vs. 9.2%. The efficiencies of both devices are limited by sub-bandgap absorption, with power weighted sub-bandgap reflectances of 81% and 58%, respectively, which we assess largely occurs in the graded buffers. We estimate that the thermophotovoltaic efficiencies would peak at ~1100 degrees C at 24.0% and 20.7% in structures with the graded buffer removed, if previously demonstrated reflectance is achieved. These devices also have application to laser power conversion in the 2.0-2.3 micron atmospheric window. We estimate peak LPC efficiencies of 36.8% and 32.5% under 2.0 micron irradiances of 1.86 W/cm^2 and 2.81 W/cm^2, respectively.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.