-
Liquid-assisted laser nanotexturing of silicon: onset of hydrodynamic processes regulated by laser-induced periodic surface structures
Authors:
Yulia Borodaenko,
Dmitriy Pavlov,
Artem Cherepakhin,
Eugeny Mitsai,
Andrei Pilnik,
Sergey Syubaev,
Stanislav O. Gurbatov,
Evgeny Modin,
Aleksey P. Porfirev,
Svetlana N. Khonina,
Aleksandr V. Shevlyagin,
Evgeny L. Gurevich,
Aleksandr A. Kuchmizhak
Abstract:
Here, upon systematic studies of femtosecond-laser processing of monocrystalline Si in oxidation-preventing methanol, we showed that the electromagnetic processes dominating at initial steps of the progressive morphology evolution define the onset of the hydrodynamic processes and resulting morphology upon subsequent multi-pulse exposure. In particular, under promoted exposure quasi-regular subwav…
▽ More
Here, upon systematic studies of femtosecond-laser processing of monocrystalline Si in oxidation-preventing methanol, we showed that the electromagnetic processes dominating at initial steps of the progressive morphology evolution define the onset of the hydrodynamic processes and resulting morphology upon subsequent multi-pulse exposure. In particular, under promoted exposure quasi-regular subwavelength laser-induced periodic surface structures (LIPSSs) were justified to evolve through the template-assisted development of the Rayleigh-Plateau hydrodynamic instability in the molten ridges forming quasi-regular surface patterns with a supra-wavelength periodicity and preferential alignment along polarization direction of the incident light. Subsequent exposure promotes fusion-assisted morphology rearrangement resulting in a spiky surface with a random orientation, yet constant inter-structure distance correlated with initial LIPSS periodicity. Along with the insight onto the physical picture driving the morphology evolution and supra-wavelength nanostructure formation, our experiments also demonstrated that the resulting quasi-regular and random spiky morphology can be tailored by the intensity/polarization distribution of the incident laser beam allowing on-demand surface nanotexturing with diverse hierarchical surface morphologies exhibiting reduced reflectivity in the visible and shortwave IR spectral ranges. Finally, we highlighted the practical attractiveness of the suggested approach for improving near-IR photoresponse and expanding operation spectral range of vertical p-n junction Si photo-detector operating under room temperature and zero-bias conditions via single-step annealing-free laser nanopatterning of its surface.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Ultrashort Pulse Laser Annealing of Amorphous Atomic Layer Deposited MoS$_2$ Films
Authors:
Malte J. M. J. Becher,
Julia Jagosz,
Rahel-Manuela Neubieser,
Jan-Lucas Wree,
Anjana Devi,
Marvin Michel,
Claudia Bock,
Evgeny L. Gurevich,
Andreas Ostendorf
Abstract:
Thin films of molybendum disulfide grown via thermal atomic layer deposition at low temperatures, suitable for temperature sensible substrates, can be amorphous. To avoid a high temperature post treatment of the whole sample, which can cause thermal degradation of the substrate or other layers, a ultrashort pulse (usp) laser-induced transformation to crystalline layers is one of the most promising…
▽ More
Thin films of molybendum disulfide grown via thermal atomic layer deposition at low temperatures, suitable for temperature sensible substrates, can be amorphous. To avoid a high temperature post treatment of the whole sample, which can cause thermal degradation of the substrate or other layers, a ultrashort pulse (usp) laser-induced transformation to crystalline layers is one of the most promising routes. In this paper we report the crystallization of amorphous MoS$_2$ layers processed with ultrashort laser pulses. The amorphous MoS$_2$ films were deposited by atomic layer deposition (ALD) and exposed to picosecond laser pulses ($λ= 532$ nm). The crystallization and the influence of the processing parameters on the film morphology were analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS$_2$ by laser annealing to self-organized patterns is demonstrated and a possible process mechanism for the ultrashort pulse laser annealing is discussed. Finally, the usp laser annealed films were compared to thermally and continuous wave (cw) laser annealed samples.
△ Less
Submitted 18 May, 2023;
originally announced May 2023.
-
On-demand Plasmon Nanoparticle-Embedded Laser-Induced Periodic Surface Structures (LIPSSs) on Silicon for Optical Nanosensing
Authors:
Yulia Borodaenko,
Sergey Syubaev,
Evgeniia Khairullina,
Ilya Tumkin,
Stanislav Gurbatov,
Aleksandr Mironenko,
Eugeny Mitsai,
Evgeny Modin,
Evgeny L. Gurevich,
Aleksandr A. Kuchmizhak
Abstract:
Ultrashort laser pulses allows to deliver electromagnetic energy to matter causing its localized heating that can be used for both material removal via ablation/evaporation and drive interface chemical reactions. Here, we showed that both mentioned processes can be simultaneously combined within straightforward laser nanotexturing of Si wafer in functionalizing solution to produce a practically re…
▽ More
Ultrashort laser pulses allows to deliver electromagnetic energy to matter causing its localized heating that can be used for both material removal via ablation/evaporation and drive interface chemical reactions. Here, we showed that both mentioned processes can be simultaneously combined within straightforward laser nanotexturing of Si wafer in functionalizing solution to produce a practically relevant metal-semiconductor surface nano-morphology. Such unique hybrid morphology represent deep-subwavelength Si LIPSSs with a extremely short period down to 70 nm with their high-aspect-ratio nanotrenches loaded with controllable amount of plasmonic nanoparticles formed $via$ laser-induced decomposition of the precursor noble-metal salts. Moreover, heat localization driving reduction process was utilized to produce surface morphology locally decorated with dissimilar plasmon-active nanoparticles. Light-absorbing deep-subwavelength Si LIPSSs loaded with controllable amount of noble-metal nanoparticles represent an attractive architecture for plasmon-related applications such as optical nanosensing where efficient coupling of the propagating optical waves to highly localized electromagnetic ``hot spots`` is a mandatory requirement. To support this statement we demonstrated applicability of such hybrid morphology for fluorescence-based detection of nanomolar concentrations of mercury cations in solution.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Theoretical simulation and experimental verification of dynamic caustic manipulation using a deformable mirror for laser material processing
Authors:
Marco Smarra,
Evgeny L. Gurevich,
Andreas Ostendorf
Abstract:
The influence of a deformable mirror on spatial light modulation in ultrafast lasers processing is demonstrated. The deformable mirror was integrated into an optical setup which contains an additional lens for generating a nearly linear focus shift in the focal plane behind the f-theta lens. The deformation of the mirror surface can be described by the Zernike terms Defocus, Astigmatism, and a com…
▽ More
The influence of a deformable mirror on spatial light modulation in ultrafast lasers processing is demonstrated. The deformable mirror was integrated into an optical setup which contains an additional lens for generating a nearly linear focus shift in the focal plane behind the f-theta lens. The deformation of the mirror surface can be described by the Zernike terms Defocus, Astigmatism, and a combination of both, resulting in a cylindric lens behavior. The influence of the mirror surface deformation in this optical setup on the intensity distribution in the focal plane was simulated. From the simulation results, the caustic in the focal plane was calculated. The simulation results were compared to experiments using a picosecond laser with a maximum pulse energy of about 60 $μ$J. We demonstrate that the initial astigmatism of the raw beam can be reduced using the deformable mirror. High linearity in the focus shift ($R^2 >98$%) and the generation of elliptical/ line intensity distributions are shown. Line intensity distribution was used to demonstrate slit drilling application in thin metal foils.
△ Less
Submitted 22 December, 2021;
originally announced December 2021.
-
Interplay of viscosity and surface tension for ripple formation by laser melting
Authors:
K. Morawetz,
S. Trinschek,
E. L. Gurevich
Abstract:
A model for ripple formation on liquid surfaces exposed to an external laser or particle beam and a variable ground is developed. The external incident beam is hereby mechanically coupled to the liquid surface due to surface roughness. Starting from the Navier Stokes equation the coupled equations for the velocity potential and the surface height are derived in a shallow-water approximation with s…
▽ More
A model for ripple formation on liquid surfaces exposed to an external laser or particle beam and a variable ground is developed. The external incident beam is hereby mechanically coupled to the liquid surface due to surface roughness. Starting from the Navier Stokes equation the coupled equations for the velocity potential and the surface height are derived in a shallow-water approximation with special attention to viscosity. The resulting equations obey conservation laws for volume and momentum where characteristic potentials for gravitation and surface tension are identified analogously to conservative forces. The approximate solutions are discussed in the context of ripple formation in laser materials processing involving melting of a surface by a laser beam. Linear stability analysis provides the formation of a damped wave modified by an interplay between the external beam, the viscosity, and the surface tension. The limit of small viscosity leads to damped gravitational and the limit of high viscosity to capillary waves. The resulting wavelengths are in the order of the ripples occurring in laser welding experiments hinting to the involvement of hydrodynamic processes in their origin. By discussing the response of the system to external periodic excitations with the help of Floquet multipliers, we show that the ripple formation could be triggered by a a periodically modulated external beam, e.g. appropriate repetition rates of an incident laser beam. The weak nonlinear stability analysis provides ranges where hexagonal or stripe structures can appear. The orientation of stripe structures and ripples are shown to be dependent on the incident angle of the laser or particle beam where a minimal angle is reported. Numerical simulations confirm the findings and allow to describe the influence of variable grounds.
△ Less
Submitted 2 November, 2021; v1 submitted 6 July, 2021;
originally announced July 2021.
-
Pattern Formation in Slot-Die Coating
Authors:
Maren Kasischke,
Simon Hartmann,
Kevin Niermann,
Denis Kostyrin,
Uwe Thiele,
Evgeny L. Gurevich
Abstract:
We experimentally study the occurrence of pattern formation during the slot-die coating of low-viscosity nearly Newtonian liquids onto Polyethylenterephthalat (PET)-substrates. In particular, it is demonstrated that with increase of the coating speed a homogeneous coating becomes unstable with respect to periodic stripe patterns. Thereby, depending on the liquid viscosity, the stripes can be orien…
▽ More
We experimentally study the occurrence of pattern formation during the slot-die coating of low-viscosity nearly Newtonian liquids onto Polyethylenterephthalat (PET)-substrates. In particular, it is demonstrated that with increase of the coating speed a homogeneous coating becomes unstable with respect to periodic stripe patterns. Thereby, depending on the liquid viscosity, the stripes can be oriented parallel or perpendicular with respect to the coating direction. Mixed states do also occur. The spatial period of perpendicular [parallel] stripes increases [decrease] with the coating speed. The dependence of the effect on various control parameters is investigated. Finally, a simple theoretical model based on the hydrodynamics of thin films of partially wetting liquids is analyzed. Comparing the results to the experiments, conclusions are drawn regarding the acting instability and pattern formation mechanisms.
△ Less
Submitted 12 May, 2022; v1 submitted 5 January, 2021;
originally announced January 2021.
-
Laser-induced surface relief nanocrowns as a manifestation of nanoscale Rayleigh-Plateau hydrodynamic instability
Authors:
D. V. Pavlov,
S. O. Gurbatov,
S. I. Kudryashov,
E. L. Gurevich,
A. A. Kuchmizhak
Abstract:
Nanoscale hydrodynamic instability of ring-like molten rims around ablative microholes produced in nanometer-thick gold films by tightly focused nanosecond-laser pulses was experimentally explored in terms of laser pulse energy and film thickness. These parametric dependencies of basic instability characteristics - order and period of the resulting nanocrowns - were analyzed, revealing its apparen…
▽ More
Nanoscale hydrodynamic instability of ring-like molten rims around ablative microholes produced in nanometer-thick gold films by tightly focused nanosecond-laser pulses was experimentally explored in terms of laser pulse energy and film thickness. These parametric dependencies of basic instability characteristics - order and period of the resulting nanocrowns - were analyzed, revealing its apparently Rayleigh-Plateau character, as compared to much less consistent possible van der Waals and impact origins. Along with fundamental importance, these findings will put forward pulsed laser ablation as an alternative facile inexpensive table-top approach to study such hydrodynamic instabilities developing at nanosecond temporal and nanometer spatial scales.
△ Less
Submitted 25 September, 2019;
originally announced October 2019.
-
Studies on ultra-short pulsed laser shock peening of stainless-steel in different confinement media
Authors:
Kishore Elango,
Jan S. Hoppius,
Lalit M. Kukreja,
Andreas Ostendorf,
Evgeny L. Gurevich
Abstract:
Laser Shock Peening (LSP) of stainless-steel 316 and 316L was studied using Ti: Sapphire laser pulses of about 2 ps duration, maximum energy of about 1mJ and pulse repetition rate of 5kHz in different liquid confinement media of Ethanol, Deionized water and separate aqueous solutions of NaCl and Glycerol. It is found that the laser fluence and/or energy attenuating mechanisms like self-focusing, f…
▽ More
Laser Shock Peening (LSP) of stainless-steel 316 and 316L was studied using Ti: Sapphire laser pulses of about 2 ps duration, maximum energy of about 1mJ and pulse repetition rate of 5kHz in different liquid confinement media of Ethanol, Deionized water and separate aqueous solutions of NaCl and Glycerol. It is found that the laser fluence and/or energy attenuating mechanisms like self-focusing, filamentation, plasma breakdown in the confinement media are less significant with ps laser pulses than those with sub-ps or fs pulse durations. It is shown that the resulting surface hardness of the peened steel as a function of laser fluence depends significantly on the confinement media and the relative increase in the hardness increases monotonically with the acoustic impedance of the liquid of the confinement medium used during LSP.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Femtosecond laser patterning of graphene electrodes for thin-film transistors
Authors:
Maren Kasischke,
Ersoy Subaşı,
Claudia Bock,
Duy-Vu Pham,
Evgeny L. Gurevich,
Ulrich Kunze,
Andreas Ostendorf
Abstract:
The aim of this study is to assess femtosecond laser patterning of graphene in air and in vacuum for the application as source and drain electrodes in thin-film transistors (TFTs). The analysis of the laser-patterned graphene with scanning electron microscopy, atomic force microscopy and Raman spectroscopy showed that processing in vacuum leads to less debris formation and thus re-deposited carbon…
▽ More
The aim of this study is to assess femtosecond laser patterning of graphene in air and in vacuum for the application as source and drain electrodes in thin-film transistors (TFTs). The analysis of the laser-patterned graphene with scanning electron microscopy, atomic force microscopy and Raman spectroscopy showed that processing in vacuum leads to less debris formation and thus re-deposited carbonaceous material on the sample compared to laser processing in air. It was found that the debris reduction due to patterning in vacuum improves the TFT characteristics significantly. Hysteresis disappears, the mobility is enhanced by an order of magnitude and the subthreshold swing is reduced from $S_{sub}~=~2.5~\mbox{V/dec}$ to $S_{sub}~=~1.5~\mbox{V/dec}$.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Selective Delamination upon Femtosecond Laser Ablation of Ceramic Surfaces
Authors:
Frederik Kiel,
Nadezhda M. Bulgakova,
Andreas Ostendorf,
Evgeny L. Gurevich
Abstract:
We report on the experimental observation of selective delamination of semi-transparent materials on the example of yttria-stabilized zirconia ceramics upon femtosecond laser processing of its surface with low numerical aperture lens. The delamination of a ceramic layer of dozens of micrometers takes place as a by-side effect of surface processing and is observed above the surface ablation thresho…
▽ More
We report on the experimental observation of selective delamination of semi-transparent materials on the example of yttria-stabilized zirconia ceramics upon femtosecond laser processing of its surface with low numerical aperture lens. The delamination of a ceramic layer of dozens of micrometers takes place as a by-side effect of surface processing and is observed above the surface ablation threshold. The onset of delamination (delamination threshold) depends on the degree of overlap of the irradiation spots from consecutive laser pulses upon beam scanning over material surface. Analysis of the delaminated layer indicates that the material undergoes melting on its both surfaces. The mechanism of delamination is identified as a complex interplay between the optical response of laser-generated free-electron plasma and nonlinear effects upon laser beam propagation in semi-transparent ceramics. The discovered effect enables controllable laser microslicing of brittle ceramic materials.
△ Less
Submitted 4 December, 2018;
originally announced January 2019.
-
Optimization of femtosecond laser processing in liquids
Authors:
Jan S. Hoppius,
Stella Maragkaki,
Alexander Kanitz,
Peter Gregorčič,
Evgeny L. Gurevich
Abstract:
In this paper we analyze femtosecond laser processing of metals in liquids searching for optimal conditions for predictable ablation. Incident laser pulses are stretched or compressed, self-focused and scattered on bubbles and on surface waves in the liquid environment. Influence of these effects on the laser intensity distribution on the target surface is discussed and optimal processing paramete…
▽ More
In this paper we analyze femtosecond laser processing of metals in liquids searching for optimal conditions for predictable ablation. Incident laser pulses are stretched or compressed, self-focused and scattered on bubbles and on surface waves in the liquid environment. Influence of these effects on the laser intensity distribution on the target surface is discussed and optimal processing parameters are suggested.
△ Less
Submitted 24 October, 2018;
originally announced November 2018.
-
Femtosecond laser crystallization of amorphous titanium oxide thin films
Authors:
Jan S. Hoppius,
Danny Bialuschewski,
Sanjay Mathur,
Andreas Ostendorf,
Evgeny L. Gurevich
Abstract:
In this paper we demonstrate experimentally that crystalline phases appear in amorphous titanium oxide upon processing with ultrafast laser pulses. Amorphous titanium thin films were produced by plasma-enhanced chemical vapor deposition (PECVD) and exposed to femtosecond laser pulses. Formation of rutile phase was confirmed by X-ray diffraction, Raman measurements and electron backscattering diffr…
▽ More
In this paper we demonstrate experimentally that crystalline phases appear in amorphous titanium oxide upon processing with ultrafast laser pulses. Amorphous titanium thin films were produced by plasma-enhanced chemical vapor deposition (PECVD) and exposed to femtosecond laser pulses. Formation of rutile phase was confirmed by X-ray diffraction, Raman measurements and electron backscattering diffraction. A rang of processing parameters for the crystallization is reported and possible background mechanisms are discussed.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Simultaneous nanopatterning and reduction of graphene oxide by femtosecond laser pulses
Authors:
Maren Kasischke,
Stella Maragkaki,
Sergej Volz,
Andreas Ostendorf,
Evgeny L. Gurevich
Abstract:
This paper presents a novel one-step method for the periodical nanopatterning and reduction of graphene oxide (GO). Self-organized periodic structures of reduced graphene oxide (rGO) appear on GO surfaces upon processing with a femtosecond laser at fluences slightly higher than the fluence needed for reduction of the GO. This indicates that the periodic pattern is formed either simultaneously with…
▽ More
This paper presents a novel one-step method for the periodical nanopatterning and reduction of graphene oxide (GO). Self-organized periodic structures of reduced graphene oxide (rGO) appear on GO surfaces upon processing with a femtosecond laser at fluences slightly higher than the fluence needed for reduction of the GO. This indicates that the periodic pattern is formed either simultaneously with or due to the reduction of the GO. The laser-induced reduction of GO was identified by sheet resistance measurements, Raman and X-ray photoelectron spectroscopy. This fast and simple method to both reduce and periodically structure GO offers a variety of possible applications in printed and flexible electronics.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
On femtosecond laser shock peening of stainless steel AISI 316
Authors:
Jan S. Hoppius,
Lalit M. Kukreja,
Marina Knyazeva,
Fabian Pöhl,
Frank Walther,
Andreas Ostendorf,
Evgeny L. Gurevich
Abstract:
In this paper we report on the competition in metal surface hardening between the femtosecond shock peening on the one hand, and formation of laser-induced periodic surface structures (LIPSS) and surface oxidation on the other hand. Peening of the stainless steel AISI 316 due to shock loading induced by femtosecond laser ablation was successfully demonstrated. However, for some range of processing…
▽ More
In this paper we report on the competition in metal surface hardening between the femtosecond shock peening on the one hand, and formation of laser-induced periodic surface structures (LIPSS) and surface oxidation on the other hand. Peening of the stainless steel AISI 316 due to shock loading induced by femtosecond laser ablation was successfully demonstrated. However, for some range of processing parameters, surface erosion due to LIPSS and oxidation seem to dominate over the peening effect. Strategies to increase the peening efficiency are discussed.
△ Less
Submitted 27 November, 2017;
originally announced November 2017.
-
Orientation of ripples induced by ultrafast laser pulses on copper in different liquids
Authors:
Stella Maragkaki,
Abdallah Elkalash,
Evgeny L. Gurevich
Abstract:
Formation of laser-induced periodic surface structures (LIPSS or ripples) was studied on a metallic surface of polished copper by using irradiation with multiple femtosecond laser pulses in different environmental conditions (air, water, ethanol and methanol). Uniform LIPSS have been achieved by controlling the peak fluence and the overlapping rate. Ripples in both orientations, perpendicular and…
▽ More
Formation of laser-induced periodic surface structures (LIPSS or ripples) was studied on a metallic surface of polished copper by using irradiation with multiple femtosecond laser pulses in different environmental conditions (air, water, ethanol and methanol). Uniform LIPSS have been achieved by controlling the peak fluence and the overlapping rate. Ripples in both orientations, perpendicular and parallel to laser polarization, were observed in all liquids simultaneously. The orientation of these ripples in the center of the ablated line was changing with the incident light intensity. For low intensities the orientation of the ripples is perpendicular to the laser polarization, whereas for high intensities it turns parallel to it without considerable changes in the period. Multi-directional LIPSS formation was also observed for moderate peak fluence in liquid environments.
△ Less
Submitted 11 September, 2017; v1 submitted 14 June, 2017;
originally announced June 2017.
-
Wavelength Dependence of Picosecond Laser-Induced Periodic Surface Structures on Copper
Authors:
Stella Maragkaki,
Thibault J. -Y. Derrien,
Yoann Levy,
Nadezhda M. Bulgakova,
Andreas Ostendorf,
Evgeny L. Gurevich
Abstract:
The physical mechanisms of the laser-induced periodic surface structures (LIPSS) formation are studied in this paper for single-pulse irradiation regimes. The change in the LIPSS period with wavelength of incident laser radiation is investigated experimentally, using a picosecond laser system, which provides 7-ps pulses in near-IR, visible, and UV spectral ranges. The experimental results are comp…
▽ More
The physical mechanisms of the laser-induced periodic surface structures (LIPSS) formation are studied in this paper for single-pulse irradiation regimes. The change in the LIPSS period with wavelength of incident laser radiation is investigated experimentally, using a picosecond laser system, which provides 7-ps pulses in near-IR, visible, and UV spectral ranges. The experimental results are compared with predictions made under the assumption that the surface-scattered waves are involved in the LIPSS formation. Considerable disagreement suggests that hydrodynamic mechanisms can be responsible for the observed pattern periodicity.
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Role of the temperature instabilities for formation of nano-patterns upon single femtosecond laser pulses on gold
Authors:
Evgeny L. Gurevich,
Yoann Levy,
Svetlana V. Gurevich,
Nadezhda M. Bulgakova
Abstract:
In this paper we investigate whether the periodic structures on metal surfaces exposed to single ultrashort laser pulses can appear due to an instability induced by two-temperature heating dynamics. The results of two-temperature model (TTM) 2D simulations are presented on the irradiation of gold by a single 800 nm femtosecond laser pulse whose intensity is modulated in order to reproduce a small…
▽ More
In this paper we investigate whether the periodic structures on metal surfaces exposed to single ultrashort laser pulses can appear due to an instability induced by two-temperature heating dynamics. The results of two-temperature model (TTM) 2D simulations are presented on the irradiation of gold by a single 800 nm femtosecond laser pulse whose intensity is modulated in order to reproduce a small initial temperature perturbation, which can arise from incoming and scattered surface wave interference. The growing (unstable) modes of the temperature distribution along the surface may be responsible for the LIPSS (Laser Induced Periodic Surface Structures) formation. After the end of the laser pulse and before the complete coupling between lattice and electrons occurs, the evolution of the amplitude of the subsequent modulation in the lattice temperature reveals different tendencies depending on the spatial period of the initial modulation. This instability-like behaviour is shown to arise due to the perturbation of the electronic temperature which relaxes slower for bigger spatial periods and thus imparts more significant modulations to the lattice temperature. Small spatial periods of the order of 100 nm and smaller experience stabilization and fast decay from the more efficient lateral heat diffusion which facilitates the relaxation of the electronic temperature amplitude due to in-depth diffusion. An analytical instability analysis of a simplified version of the TTM set of equations supports the lattice temperature modulation behaviour obtained in the simulations and reveals that in-depth diffusion length is a determining parameter in the dispersion relation of unstable modes. Finally it is discussed how the change in optical properties can intensify the modulation-related effects.
△ Less
Submitted 7 October, 2016;
originally announced October 2016.
-
Laser Induced Periodic Surface Structures Induced by Surface Plasmons Coupled via Roughness
Authors:
E. L. Gurevich,
S. V. Gurevich
Abstract:
In this paper the formation mechanisms of the femtosecond laser-induced periodic surface structures (LIPSS) are discussed. One of the most frequently-used theories explains the structures by interference between the incident laser beam and surface plasmon-polariton waves. The latter is most commonly attributed to the coupling of the incident laser light to the surface roughness. We demonstrate tha…
▽ More
In this paper the formation mechanisms of the femtosecond laser-induced periodic surface structures (LIPSS) are discussed. One of the most frequently-used theories explains the structures by interference between the incident laser beam and surface plasmon-polariton waves. The latter is most commonly attributed to the coupling of the incident laser light to the surface roughness. We demonstrate that this excitation mechanism of surface plasmons contradicts to the results of laser-ablation experiments. As an alternative approach to the excitation of LIPSS we analyse development of hydrodynamic instabilities in the melt layer.
△ Less
Submitted 4 July, 2013; v1 submitted 3 July, 2013;
originally announced July 2013.
