-
Rapid on-demand generation of thermal states in superconducting quantum circuits
Authors:
Timm Fabian Mörstedt,
Wallace Santos Teixeira,
Arto Viitanen,
Heidi Kivijärvi,
Maaria Tiiri,
Miika Rasola,
Andras Marton Gunyho,
Suman Kundu,
Louis Lattier,
Vasilii Vadimov,
Gianluigi Catelani,
Vasilii Sevriuk,
Johannes Heinsoo,
Jukka Räbinä,
Joachim Ankerhold,
Mikko Möttönen
Abstract:
We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable environment. Through single-shot readout, we monitor the transmon up to its third-excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude…
▽ More
We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable environment. Through single-shot readout, we monitor the transmon up to its third-excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude pulses can generate Boltzmann-distributed populations from a temperature of 110 mK up to 500 mK within 100 ns. As we propose in our work, this fast and efficient temperature control provides an appealing opportunity to demonstrate a quantum heat engine. Our results also pave the way for efficient dissipative state preparation and for reducing the circuit depth in thermally assisted quantum algorithms and quantum annealing.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
Single-Shot Readout of a Superconducting Qubit Using a Thermal Detector
Authors:
András M. Gunyhó,
Suman Kundu,
Jian Ma,
Wei Liu,
Sakari Niemelä,
Giacomo Catto,
Vasilii Vadimov,
Visa Vesterinen,
Priyank Singh,
Qiming Chen,
Mikko Möttönen
Abstract:
Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of…
▽ More
Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~μ\mathrm{s}$, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~μ\mathrm{s}$. Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond.
△ Less
Submitted 13 April, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
Qubit Measurement by Multichannel Driving
Authors:
Joni Ikonen,
Jan Goetz,
Jesper Ilves,
Aarne Keränen,
Andras M. Gunyho,
Matti Partanen,
Kuan Y. Tan,
Dibyendu Hazra,
Leif Grönberg,
Visa Vesterinen,
Slawomir Simbierowicz,
Juha Hassel,
Mikko Möttönen
Abstract:
We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize m…
▽ More
We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize measurement speed and fidelity. We experimentally test this measurement protocol using a superconducting qubit coupled to a resonator mode. For a certain measurement time, we observe that the conventional dispersive readout yields close to 100% higher average measurement error than our protocol. Finally, we use an additional resonator drive to leave the resonator state to vacuum if the qubit is in the ground state during the measurement protocol. This suggests that the proposed measurement technique may become useful in unconditionally resetting the resonator to a vacuum state after the measurement pulse.
△ Less
Submitted 25 February, 2019; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Nanobolometer with Ultralow Noise Equivalent Power
Authors:
R. Kokkoniemi,
J. Govenius,
V. Vesterinen,
R. E. Lake,
A. M. Gunyho,
K. Y. Tan,
S. Simbierowicz,
L. Grönberg,
J. Lehtinen,
M. Prunnila,
J. Hassel,
O. -P. Saira,
M. Möttönen
Abstract:
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent pow…
▽ More
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent power, $20\textrm{ zW}/\sqrt{\textrm{Hz}}$, than previously reported for any bolometer. Importantly, it is more than an order of magnitude faster than other low-noise bolometers, with a time constant of 30 $μ$s at $60\textrm{ zW}/\sqrt{\textrm{Hz}}$. These results suggest a calorimetric energy resolution of $0.3\textrm{ zJ}=h\times 0.4$ THz with a time constant of 30 $μ$s. Thus the introduced nanobolometer is a promising candidate for future applications requiring extreme precision and speed such as those in astronomy and terahertz photon counting.
△ Less
Submitted 26 June, 2018; v1 submitted 25 June, 2018;
originally announced June 2018.
-
Evolution of an isolated monopole in a spin-1 Bose-Einstein condensate
Authors:
Konstantin Tiurev,
Pekko Kuopanportti,
András Márton Gunyhó,
Masahito Ueda,
Mikko Möttönen
Abstract:
We simulate the decay dynamics of an isolated monopole defect in the nematic vector of a spin-1 Bose-Einstein condensate during the polar-to-ferromagnetic phase transition of the system. Importantly, the decay of the monopole occurs in the absence of external magnetic fields and is driven principally by the dynamical instability due to the ferromagnetic spin-exchange interactions. An initial isola…
▽ More
We simulate the decay dynamics of an isolated monopole defect in the nematic vector of a spin-1 Bose-Einstein condensate during the polar-to-ferromagnetic phase transition of the system. Importantly, the decay of the monopole occurs in the absence of external magnetic fields and is driven principally by the dynamical instability due to the ferromagnetic spin-exchange interactions. An initial isolated monopole is observed to relax into a polar-core spin vortex, thus demonstrating the spontaneous transformation of a point defect of the polar order parameter manifold to a line defect of the ferromagnetic manifold. We also investigate the dynamics of an isolated monopole pierced by a quantum vortex line with winding number k. It is shown to decay into a coreless Anderson-Toulouse vortex if k = 1 and into a singular vortex with an empty core if k = 2. In both cases, the resulting vortex is also encircled by a polar-core vortex ring.
△ Less
Submitted 18 November, 2016; v1 submitted 8 September, 2016;
originally announced September 2016.
