Showing 1–42 of 42 results for author: Grossman, J C

Coherent Exciton-Lattice Dynamics in a 2D Metal Organochalcogenolate Semiconductor

Authors: Eric R. Powers, Watcharaphol Paritmongkol, Dillon C. Yost, Woo Seok Lee, Jeffrey C. Grossman, William A. Tisdale

Abstract: Hybrid organic-inorganic nanomaterials can exhibit transitional behavior that deviates from models developed for all-organic or all-inorganic materials systems. Here, we reveal the complexity of exciton-phonon interactions in a recently discovered 2D layered hybrid organic-inorganic semiconductor, silver phenylselenolate (AgSePh). Using femtosecond resonant impulsive vibrational spectroscopy and n… ▽ More Hybrid organic-inorganic nanomaterials can exhibit transitional behavior that deviates from models developed for all-organic or all-inorganic materials systems. Here, we reveal the complexity of exciton-phonon interactions in a recently discovered 2D layered hybrid organic-inorganic semiconductor, silver phenylselenolate (AgSePh). Using femtosecond resonant impulsive vibrational spectroscopy and non-resonant Raman scattering, we measure multiple hybrid organic-inorganic vibrational modes and identify a subset of these modes that strongly couple to the electronic excited state. Calculations by density functional perturbation theory show that these strongly coupled modes exhibit large out-of-plane silver atomic motions and silver-selenium spacing displacements. Moreover, analysis of photoluminescence fine-structure splitting and temperature-dependent peak-shifting/linewidth-broadening suggests that light emission in AgSePh is most strongly affected by a compound 100 cm-1 mode involving the wagging motion of phenylselenolate ligands and accompanying metal-chalcogen stretching. Finally, red-shifting of vibrational modes with increasing temperature reveals a high degree of anharmonicity arising from non-covalent interactions between phenyl rings. These findings reveal the unique effects of hybrid vibrational modes in organic-inorganic semiconductors and motivate future work aimed at specifically engineering such interactions through chemical and structural modification. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Multimodal machine learning for materials science: composition-structure bimodal learning for experimentally measured properties

Authors: Sheng Gong, Shuo Wang, Taishan Zhu, Yang Shao-Horn, Jeffrey C. Grossman

Abstract: The widespread application of multimodal machine learning models like GPT-4 has revolutionized various research fields including computer vision and natural language processing. However, its implementation in materials informatics remains underexplored, despite the presence of materials data across diverse modalities, such as composition and structure. The effectiveness of machine learning models… ▽ More The widespread application of multimodal machine learning models like GPT-4 has revolutionized various research fields including computer vision and natural language processing. However, its implementation in materials informatics remains underexplored, despite the presence of materials data across diverse modalities, such as composition and structure. The effectiveness of machine learning models trained on large calculated datasets depends on the accuracy of calculations, while experimental datasets often have limited data availability and incomplete information. This paper introduces a novel approach to multimodal machine learning in materials science via composition-structure bimodal learning. The proposed COmposition-Structure Bimodal Network (COSNet) is designed to enhance learning and predictions of experimentally measured materials properties that have incomplete structure information. Bimodal learning significantly reduces prediction errors across distinct materials properties including Li conductivity in solid electrolyte, band gap, refractive index, dielectric constant, energy, and magnetic moment, surpassing composition-only learning methods. Furthermore, we identified that data augmentation based on modal availability plays a pivotal role in the success of bimodal learning. △ Less

Submitted 3 August, 2023; originally announced September 2023.

Examining graph neural networks for crystal structures: limitations and opportunities for capturing periodicity

Authors: Sheng Gong, Tian Xie, Yang Shao-Horn, Rafael Gomez-Bombarelli, Jeffrey C. Grossman

Abstract: Historically, materials informatics has relied on human-designed descriptors of materials structures. In recent years, graph neural networks (GNNs) have been proposed for learning representations of crystal structures from data end-to-end producing vectorial embeddings that are optimized for downstream prediction tasks. However, a systematic scheme is lacking to analyze and understand the limits o… ▽ More Historically, materials informatics has relied on human-designed descriptors of materials structures. In recent years, graph neural networks (GNNs) have been proposed for learning representations of crystal structures from data end-to-end producing vectorial embeddings that are optimized for downstream prediction tasks. However, a systematic scheme is lacking to analyze and understand the limits of GNNs for capturing crystal structures. In this work, we propose to use human-designed descriptors as a bank of human knowledge to test whether black-box GNNs can capture the knowledge of crystal structures. We find that current state-of-the-art GNNs cannot capture the periodicity of crystal structures well, and we analyze the limitations of the GNN models that result in this failure from three aspects: local expressive power, long-range information, and readout function. We propose an initial solution, hybridizing descriptors with GNNs, to improve the prediction of GNNs for materials properties, especially phonon internal energy and heat capacity with 90% lower errors, and we analyze the mechanisms for the improved prediction. All the analysis can be extended easily to other deep representation learning models, human-designed descriptors, and systems such as molecules and amorphous materials. △ Less

Submitted 27 March, 2023; v1 submitted 9 August, 2022; originally announced August 2022.

A cloud platform for automating and sharing analysis of raw simulation data from high throughput polymer molecular dynamics simulations

Authors: Tian Xie, Ha-Kyung Kwon, Daniel Schweigert, Sheng Gong, Arthur France-Lanord, Arash Khajeh, Emily Crabb, Michael Puzon, Chris Fajardo, Will Powelson, Yang Shao-Horn, Jeffrey C. Grossman

Abstract: Open material databases storing hundreds of thousands of material structures and their corresponding properties have become the cornerstone of modern computational materials science. Yet, the raw outputs of the simulations, such as the trajectories from molecular dynamics simulations and charge densities from density functional theory calculations, are generally not shared due to their huge size.… ▽ More Open material databases storing hundreds of thousands of material structures and their corresponding properties have become the cornerstone of modern computational materials science. Yet, the raw outputs of the simulations, such as the trajectories from molecular dynamics simulations and charge densities from density functional theory calculations, are generally not shared due to their huge size. In this work, we describe a cloud-based platform to facilitate the sharing of raw data and enable the fast post-processing in the cloud to extract new properties defined by the user. As an initial demonstration, our database currently includes 6286 molecular dynamics trajectories for amorphous polymer electrolytes and 5.7 terabytes of data. We create a public analysis library at https://github.com/TRI-AMDD/htp_md to extract multiple properties from the raw data, using both expert designed functions and machine learning models. The analysis is run automatically with computation in the cloud, and results then populate a database that can be accessed publicly. Our platform encourages users to contribute both new trajectory data and analysis functions via public interfaces. Newly analyzed properties will be incorporated into the database. Finally, we create a front-end user interface at https://www.htpmd.matr.io for browsing and visualization of our data. We envision the platform to be a new way of sharing raw data and new insights for the computational materials science community. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: 21 pages, 7 figures

Calibrating DFT formation enthalpy calculations by multi-fidelity machine learning

Authors: Sheng Gong, Shuo Wang, Tian Xie, Woo Hyun Chae, Runze Liu, Jeffrey C. Grossman

Abstract: Machine learning materials properties measured by experiments is valuable yet difficult due to the limited amount of experimental data. In this work, we use a multi-fidelity random forest model to learn the experimental formation enthalpy of materials with prediction accuracy higher than the empirically corrected PBE functional (PBEfe) and meta-GGA functional (SCAN), and it outperforms the hotly s… ▽ More Machine learning materials properties measured by experiments is valuable yet difficult due to the limited amount of experimental data. In this work, we use a multi-fidelity random forest model to learn the experimental formation enthalpy of materials with prediction accuracy higher than the empirically corrected PBE functional (PBEfe) and meta-GGA functional (SCAN), and it outperforms the hotly studied deep neural-network based representation learning and transfer learning. We then use the model to calibrate the DFT formation enthalpy in the Materials Project database, and discover materials with underestimated stability. The multi-fidelity model is also used as a data-mining approach to find how DFT deviates from experiments by the explaining the model output. △ Less

Submitted 21 March, 2022; v1 submitted 25 October, 2021; originally announced October 2021.

Journal ref: JACS Au 2022

Accelerating amorphous polymer electrolyte screening by learning to reduce errors in molecular dynamics simulated properties

Authors: Tian Xie, Arthur France-Lanord, Yanming Wang, Jeffrey Lopez, Michael Austin Stolberg, Megan Hill, Graham Michael Leverick, Rafael Gomez-Bombarelli, Jeremiah A. Johnson, Yang Shao-Horn, Jeffrey C. Grossman

Abstract: Polymer electrolytes are promising candidates for the next generation lithium-ion battery technology. Large scale screening of polymer electrolytes is hindered by the significant cost of molecular dynamics (MD) simulation in amorphous systems: the amorphous structure of polymers requires multiple, repeated sampling to reduce noise and the slow relaxation requires long simulation time for convergen… ▽ More Polymer electrolytes are promising candidates for the next generation lithium-ion battery technology. Large scale screening of polymer electrolytes is hindered by the significant cost of molecular dynamics (MD) simulation in amorphous systems: the amorphous structure of polymers requires multiple, repeated sampling to reduce noise and the slow relaxation requires long simulation time for convergence. Here, we accelerate the screening with a multi-task graph neural network that learns from a large amount of noisy, unconverged, short MD data and a small number of converged, long MD data. We achieve accurate predictions of 4 different converged properties and screen a space of 6247 polymers that is orders of magnitude larger than previous computational studies. Further, we extract several design principles for polymer electrolytes and provide an open dataset for the community. Our approach could be applicable to a broad class of material discovery problems that involve the simulation of complex, amorphous materials. △ Less

Submitted 15 March, 2022; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 29 pages, 6 figures + supplementary information

Journal ref: Nature communications 13.1 (2022): 1-10

Screening and understanding Li adsorption on 2-dimensional metallic materials by learning physics

Authors: Sheng Gong, Shuo Wang, Taishan Zhu, Xi Chen, Jeffrey C. Grossman

Abstract: Two-dimensional (2D) materials have received considerable attention as possible electrodes in Li-ion batteries (LIBs), although a deeper understanding of the Li adsorption behavior as well as broad screening of the materials space is still needed. In this work, we build a high-throughput screening scheme that incorporates a learned interaction. First, density functional theory and graph convolutio… ▽ More Two-dimensional (2D) materials have received considerable attention as possible electrodes in Li-ion batteries (LIBs), although a deeper understanding of the Li adsorption behavior as well as broad screening of the materials space is still needed. In this work, we build a high-throughput screening scheme that incorporates a learned interaction. First, density functional theory and graph convolution networks are utilized to calculate minimum Li adsorption energies for a small set of 2D metallic materials. The data is then used to find a dependence of the minimum Li adsorption energies on the sum of ionization potential, work function of the 2D metal, and coupling energy between Li+ and substrate. Our results show that variances of elemental properties and density are the most correlated features with coupling. To illustrate the applicability of this approach, the model is employed to show that some fluorides and chromium oxides are potential high-voltage materials with adsorption energies < -7 eV, and the found physics is used as the design principle to enhance the Li adsorption ability of graphene. This physics-driven approach shows higher accuracy and transferability compared with purely data-driven models. △ Less

Submitted 31 December, 2020; originally announced January 2021.

Journal ref: JACS Au 2021, 1, 11, 1904

Quantum multifractality in thermal conduction across random interfaces

Authors: Taishan Zhu, Giuseppe Romano, Lina Yang, Martin Ostoja-Starzewski, Jeffrey C. Grossman

Abstract: Self-affine morphology of random interfaces governs their functionalities across tribological, geological, (opto-)electrical and biological applications. However, the knowledge of how energy carriers or generally classical/quantum waves interact with structural irregularity is still incomplete. In this work, we study vibrational energy transport through random interfaces exhibiting different corre… ▽ More Self-affine morphology of random interfaces governs their functionalities across tribological, geological, (opto-)electrical and biological applications. However, the knowledge of how energy carriers or generally classical/quantum waves interact with structural irregularity is still incomplete. In this work, we study vibrational energy transport through random interfaces exhibiting different correlation functions on the two-dimensional hexagonal lattice. We show that random interfaces at the atomic scale are Cantor composites populated on geometrical fractals, thus multifractals, and calculate their quantized conductance using atomistic approaches. We obtain a universal scaling law, which contains self-similarity for mass perturbation, and exponential scaling of structural irregularity quantified by fractal dimension. The multifractal nature and Cantor-composite picture may also be extendable to charge and photon transport across random interfaces. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Charting Lattice Thermal Conductivity of Inorganic Crystals

Authors: Taishan Zhu, Sheng Gong, Tian Xie, Prashun Gorai, Jeffrey C. Grossman

Abstract: Thermal conductivity is a fundamental material property but challenging to predict, with less than 5% out of about $10^5$ synthesized inorganic materials being documented. In this work, we extract the structural chemistry that governs lattice thermal conductivity, by combining graph neural networks and random forest approaches. We show that both mean and variation of unit-cell configurational prop… ▽ More Thermal conductivity is a fundamental material property but challenging to predict, with less than 5% out of about $10^5$ synthesized inorganic materials being documented. In this work, we extract the structural chemistry that governs lattice thermal conductivity, by combining graph neural networks and random forest approaches. We show that both mean and variation of unit-cell configurational properties, such as atomic volume and bond length, are the most important features, followed by mass and elemental electronegativity. We chart the structural chemistry of lattice thermal conductivity into extended van-Arkel triangles, and predict the thermal conductivity of all known inorganic materials in the Inorganic Crystal Structure Database. For the latter, we develop a transfer learning framework extendable for other applications. △ Less

Submitted 21 June, 2020; originally announced June 2020.

Charge density and redox potential of LiNiO2 using ab initio diffusion quantum Monte Carlo

Authors: Kayahan Saritas, Eric R. Fadel, Boris Kozinsky, Jeffrey C. Grossman

Abstract: Electronic structure of layered LiNiO2 has been controversial despite numerous theoretical and experimental reports regarding its nature. We investigate the charge densities, lithium intercalation potentials and Li diffusion barrier energies of LixNiO2 (0.0 < x < 1.0) system using a truly ab-initio method, diffusion quantum Monte Carlo (DMC). We compare the charge densities from DMC and density fu… ▽ More Electronic structure of layered LiNiO2 has been controversial despite numerous theoretical and experimental reports regarding its nature. We investigate the charge densities, lithium intercalation potentials and Li diffusion barrier energies of LixNiO2 (0.0 < x < 1.0) system using a truly ab-initio method, diffusion quantum Monte Carlo (DMC). We compare the charge densities from DMC and density functional theory (DFT) and show that local and semi-local DFT functionals yield spin polarization densities with incorrect sign on the oxygen atoms. SCAN functional and Hubbard-U correction improves the polarization density around Ni and O atoms, resulting in smaller deviations from the DMC densities. DMC accurately captures the p-d hybridization between the Ni-O atoms, yielding accurate lithium intercalation voltages, polarization densities and reaction barriers. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Predicting charge density distribution of materials using a local-environment-based graph convolutional network

Authors: Sheng Gong, Tian Xie, Taishan Zhu, Shuo Wang, Eric R. Fadel, Yawei Li, Jeffrey C. Grossman

Abstract: Electron charge density distribution of materials is one of the key quantities in computational materials science as theoretically it determines the ground state energy and practically it is used in many materials analyses. However, the scaling of density functional theory calculations with number of atoms limits the usage of charge-density-based calculations and analyses. Here we introduce a mach… ▽ More Electron charge density distribution of materials is one of the key quantities in computational materials science as theoretically it determines the ground state energy and practically it is used in many materials analyses. However, the scaling of density functional theory calculations with number of atoms limits the usage of charge-density-based calculations and analyses. Here we introduce a machine learning scheme with local-environment-based graphs and graph convolutional neural networks to predict charge density on grid-points from crystal structure. We show the accuracy of this scheme through a comparison of predicted charge densities as well as properties derived from the charge density, and the scaling is O(N). More importantly, the transferability is shown to be high with respect to different compositions and structures, which results from the explicit encoding of geometry. △ Less

Submitted 24 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. B 100, 184103 (2019)

Graph Dynamical Networks for Unsupervised Learning of Atomic Scale Dynamics in Materials

Authors: Tian Xie, Arthur France-Lanord, Yanming Wang, Yang Shao-Horn, Jeffrey C. Grossman

Abstract: Understanding the dynamical processes that govern the performance of functional materials is essential for the design of next generation materials to tackle global energy and environmental challenges. Many of these processes involve the dynamics of individual atoms or small molecules in condensed phases, e.g. lithium ions in electrolytes, water molecules in membranes, molten atoms at interfaces, e… ▽ More Understanding the dynamical processes that govern the performance of functional materials is essential for the design of next generation materials to tackle global energy and environmental challenges. Many of these processes involve the dynamics of individual atoms or small molecules in condensed phases, e.g. lithium ions in electrolytes, water molecules in membranes, molten atoms at interfaces, etc., which are difficult to understand due to the complexity of local environments. In this work, we develop graph dynamical networks, an unsupervised learning approach for understanding atomic scale dynamics in arbitrary phases and environments from molecular dynamics simulations. We show that important dynamical information can be learned for various multi-component amorphous material systems, which is difficult to obtain otherwise. With the large amounts of molecular dynamics data generated everyday in nearly every aspect of materials design, this approach provides a broadly useful, automated tool to understand atomic scale dynamics in material systems. △ Less

Submitted 22 May, 2019; v1 submitted 18 February, 2019; originally announced February 2019.

Comments: 25 + 7 pages, 5 + 3 figures

Journal ref: Nat. Commun. 10, 2667 (2019)

Correlations from ion-pairing and the Nernst-Einstein equation

Authors: Arthur France-Lanord, Jeffrey C. Grossman

Abstract: We present a new approximation to ionic conductivity well suited to dynamical atomic-scale simulations, based on the Nernst-Einstein equation. In our approximation, ionic aggregates constitute the elementary charge carriers, and are considered as non-interacting species. This approach conveniently captures the dominant effect of ion-ion correlations on conductivity, short range interactions in the… ▽ More We present a new approximation to ionic conductivity well suited to dynamical atomic-scale simulations, based on the Nernst-Einstein equation. In our approximation, ionic aggregates constitute the elementary charge carriers, and are considered as non-interacting species. This approach conveniently captures the dominant effect of ion-ion correlations on conductivity, short range interactions in the form of clustering. In addition to providing better estimates to the conductivity at a lower computational cost than exact approaches, this new method allows to understand the physical mechanisms driving ion conduction in concentrated electrolytes. As an example, we consider Li$^+$ conduction in poly(ethylene oxide), a standard solid-state polymer electrolyte. Using our newly developed approach, we are able to reproduce recent experimental results reporting negative cation transference numbers at high salt concentrations, and to confirm that this effect can be caused by a large population of negatively charged clusters involving cations. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. Lett. 122, 136001 (2019)

Thermodynamic limits to energy conversion in solar thermal fuels

Authors: David A Strubbe, Jeffrey C Grossman

Abstract: Solar thermal fuels (STFs) are an unconventional paradigm for solar energy conversion and storage which is attracting renewed attention. In this concept, a material absorbs sunlight and stores the energy chemically via an induced structural change, which can later be reversed to release the energy as heat. An example is the azobenzene molecule which has a cis-trans photoisomerization with these pr… ▽ More Solar thermal fuels (STFs) are an unconventional paradigm for solar energy conversion and storage which is attracting renewed attention. In this concept, a material absorbs sunlight and stores the energy chemically via an induced structural change, which can later be reversed to release the energy as heat. An example is the azobenzene molecule which has a cis-trans photoisomerization with these properties, and can be tuned by chemical substitution and attachment to templates such as carbon nanotubes, small molecules, or polymers. By analogy to the Shockley-Queisser limit for photovoltaics, we analyze the maximum attainable efficiency for STFs from fundamental thermodynamic considerations. Microscopic reversibility provides a bound on the quantum yield of photoisomerization due to fluorescence, regardless of details of photochemistry. We emphasize the importance of analyzing the free energy, not just enthalpy, of the metastable molecules, and find an efficiency limit for conversion to stored chemical energy equal to the Shockley-Queisser limit. STF candidates from a recent high-throughput search are analyzed in light of the efficiency limit. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Comments: 16 pages, 4 figures

Journal ref: J. Phys.: Condens. Matter 31 (2019) 034002

Hierarchical Visualization of Materials Space with Graph Convolutional Neural Networks

Authors: Tian Xie, Jeffrey C. Grossman

Abstract: The combination of high throughput computation and machine learning has led to a new paradigm in materials design by allowing for the direct screening of vast portions of structural, chemical, and property space. The use of these powerful techniques leads to the generation of enormous amounts of data, which in turn calls for new techniques to efficiently explore and visualize the materials space t… ▽ More The combination of high throughput computation and machine learning has led to a new paradigm in materials design by allowing for the direct screening of vast portions of structural, chemical, and property space. The use of these powerful techniques leads to the generation of enormous amounts of data, which in turn calls for new techniques to efficiently explore and visualize the materials space to help identify underlying patterns. In this work, we develop a unified framework to hierarchically visualize the compositional and structural similarities between materials in an arbitrary material space with representations learned from different layers of graph convolutional neural networks. We demonstrate the potential for such a visualization approach by showing that patterns emerge automatically that reflect similarities at different scales in three representative classes of materials: perovskites, elemental boron, and general inorganic crystals, covering material spaces of different compositions, structures, and both. For perovskites, elemental similarities are learned that reflects multiple aspects of atom properties. For elemental boron, structural motifs emerge automatically showing characteristic boron local environments. For inorganic crystals, the similarity and stability of local coordination environments are shown combining different center and neighbor atoms. The method could help transition to a data-centered exploration of materials space in automated materials design. △ Less

Submitted 18 September, 2018; v1 submitted 9 July, 2018; originally announced July 2018.

Comments: 22 + 7 pages, 6 + 5 figures

Journal ref: J. Chem. Phys. 149, 174111 (2018)

Machine Learning Enabled Computational Screening of Inorganic Solid Electrolytes for Dendrite Suppression with Li Metal Anode

Authors: Zeeshan Ahmad, Tian Xie, Chinmay Maheshwari, Jeffrey C. Grossman, Venkatasubramanian Viswanathan

Abstract: Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through the use of solid electrolytes has emerged as one of the most promising strategies for enabling the use of Li metal anodes. We perform a computational screening… ▽ More Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through the use of solid electrolytes has emerged as one of the most promising strategies for enabling the use of Li metal anodes. We perform a computational screening of over 12,000 inorganic solids based on their ability to suppress dendrite initiation in contact with Li metal anode. Properties for mechanically isotropic and anisotropic interfaces that can be used in stability criteria for determining the propensity of dendrite initiation are usually obtained from computationally expensive first-principles methods. In order to obtain a large dataset for screening, we use machine learning models to predict the mechanical properties of several new solid electrolytes. We train a convolutional neural network on the shear and bulk moduli purely on structural features of the material. We use AdaBoost, Lasso and Bayesian ridge regression to train the elastic constants, where the choice of the model depended on the size of the training data and the noise that it can handle. Our models give us direct interpretability by revealing the dominant structural features affecting the elastic constants. The stiffness is found to increase with a decrease in volume per atom, increase in minimum anion-anion separation, and increase in sublattice (all but Li) packing fraction. Cross-validation/test performance suggests our models generalize well. We predict over 20 mechanically anisotropic interfaces between Li metal and 6 solid electrolytes which can be used to suppress dendrite growth. Our screened candidates are generally soft and highly anisotropic, and present opportunities for simultaneously obtaining dendrite suppression and high ionic conductivity in solid electrolytes. △ Less

Submitted 12 April, 2018; originally announced April 2018.

Comments: 34 pages, 4 Figures, 3 Table, 7 pages of Supporting Information

Journal ref: ACS Cent. Sci., 2018, 4 (8), 996-1006

Electron-Hole Separation in Ferroelectric Oxides for Efficient Photovoltaic Responses

Authors: Donghoon Kim, Hyeon Han, June Ho Lee, Jeffrey C. Grossman, Donghun Kim, Hyun Myung Jang

Abstract: Despite their potential to exceed the theoretical Shockley-Queisser limit, ferroelectric photovoltaics (FPVs) have performed inefficiently due to their extremely low photocurrents. Incorporating Bi2FeCrO6 (BFCO) as the light absorber in FPVs has recently led to impressively high and record photocurrents [Nechache et al. Nature Photon. 2015, 9, 61], reviving the FPV field. However, our understandin… ▽ More Despite their potential to exceed the theoretical Shockley-Queisser limit, ferroelectric photovoltaics (FPVs) have performed inefficiently due to their extremely low photocurrents. Incorporating Bi2FeCrO6 (BFCO) as the light absorber in FPVs has recently led to impressively high and record photocurrents [Nechache et al. Nature Photon. 2015, 9, 61], reviving the FPV field. However, our understanding of this remarkable phenomenon is far from satisfactory. Here, we use first-principles calculations to determine that such excellent performance mainly lies in the efficient separation of electron-hole (e-h) pairs. We show that photoexcited electrons and holes in BFCO are spatially separated on the Fe and Cr sites, respectively. This separation is much more pronounced in disordered BFCO phases, which show exceptional PV responses. We further set out to design a strategy for next-generation FPVs, not limited to BFCO, by exploring 44 additional Bi-based double-perovskite oxides. We suggest 9 novel active-layer materials that can offer strong e-h separations and a desired band gap energy for application in FPVs. Our work indicates that charge separation is the most important issue to be addressed for FPVs to compete with conventional devices. △ Less

Submitted 29 November, 2017; originally announced November 2017.

Comments: 33 pages, 5 main figures, 5 supporting figures

Crystal Graph Convolutional Neural Networks for an Accurate and Interpretable Prediction of Material Properties

Authors: Tian Xie, Jeffrey C. Grossman

Abstract: The use of machine learning methods for accelerating the design of crystalline materials usually requires manually constructed feature vectors or complex transformation of atom coordinates to input the crystal structure, which either constrains the model to certain crystal types or makes it difficult to provide chemical insights. Here, we develop a crystal graph convolutional neural networks frame… ▽ More The use of machine learning methods for accelerating the design of crystalline materials usually requires manually constructed feature vectors or complex transformation of atom coordinates to input the crystal structure, which either constrains the model to certain crystal types or makes it difficult to provide chemical insights. Here, we develop a crystal graph convolutional neural networks framework to directly learn material properties from the connection of atoms in the crystal, providing a universal and interpretable representation of crystalline materials. Our method provides a highly accurate prediction of density functional theory calculated properties for eight different properties of crystals with various structure types and compositions after being trained with $10^4$ data points. Further, our framework is interpretable because one can extract the contributions from local chemical environments to global properties. Using an example of perovskites, we show how this information can be utilized to discover empirical rules for materials design. △ Less

Submitted 6 April, 2018; v1 submitted 27 October, 2017; originally announced October 2017.

Comments: 6+9 pages, 3+6 figures

Journal ref: Phys. Rev. Lett. 120, 145301 (2018)

Phonon Bottleneck Identification in Disordered Nanoporous Materials

Authors: Giuseppe Romano, Jeffrey C. Grossman

Abstract: Nanoporous materials are a promising platform for thermoelectrics in that they offer high thermal conductivity tunability while preserving good electrical properties, a crucial requirement for high- effciency thermal energy conversion. Understanding the impact of the pore arrangement on thermal transport is pivotal to engineering realistic materials, where pore disorder is unavoidable. Although th… ▽ More Nanoporous materials are a promising platform for thermoelectrics in that they offer high thermal conductivity tunability while preserving good electrical properties, a crucial requirement for high- effciency thermal energy conversion. Understanding the impact of the pore arrangement on thermal transport is pivotal to engineering realistic materials, where pore disorder is unavoidable. Although there has been considerable progress in modeling thermal size effects in nanostructures, it has remained a challenge to screen such materials over a large phase space due to the slow simulation time required for accurate results. We use density functional theory in connection with the Boltzmann transport equation, to perform calculations of thermal conductivity in disordered porous materials. By leveraging graph theory and regressive analysis, we identify the set of pores representing the phonon bottleneck and obtain a descriptor for thermal transport, based on the sum of the pore-pore distances between such pores. This approach provides a simple tool to estimate phonon suppression in realistic porous materials for thermoelectric applications and enhance our understanding of heat transport in disordered materials. △ Less

Submitted 2 September, 2017; v1 submitted 16 December, 2016; originally announced December 2016.

Journal ref: Phys. Rev. B 96, 115425 (2017)

Genome-inspired molecular identification in organic matter via Raman spectroscopy

Authors: Yun Liu, Nicola Ferralis, L. Taras Bryndzia, Jeffrey C. Grossman

Abstract: Rapid, non-destructive characterization of molecular level chemistry for organic matter (OM) is experimentally challenging. Raman spectroscopy is one of the most widely used techniques for non-destructive chemical characterization, although it currently does not provide detailed identification of molecular components in OM, due to the combination of diffraction-limited spatial resolution and poor… ▽ More Rapid, non-destructive characterization of molecular level chemistry for organic matter (OM) is experimentally challenging. Raman spectroscopy is one of the most widely used techniques for non-destructive chemical characterization, although it currently does not provide detailed identification of molecular components in OM, due to the combination of diffraction-limited spatial resolution and poor applicability of peak-fitting algorithms. Here, we develop a genome-inspired collective molecular structure fingerprinting approach, which utilizes ab initio calculations and data mining techniques to extract molecular level chemistry from the Raman spectra of OM. We illustrate the power of such an approach by identifying representative molecular fingerprints in OM, for which the molecular chemistry is to date inaccessible using non-destructive characterization techniques. Chemical properties such as aromatic cluster size distribution and H/C ratio can now be quantified directly using the identified molecular fingerprints. Our approach will enable non-destructive identification of chemical signatures with their correlation to the preservation of biosignatures in OM, accurate detection and quantification of environmental contamination, as well as objective assessment of OM with respect to their chemical contents. △ Less

Submitted 5 February, 2016; originally announced February 2016.

Electronic topological transitions in Cd at high pressures

Authors: Varadharajan Srinivasan, B. K. Godwal, Jeffrey C. Grossman, Raymond Jeanloz

Abstract: Pressure-induced changes in the Fermi surface of Cd up to 40 GPa are studied using highly accurate density-functional theory calculations. The topology of Fermi surface changes at pressures of 2, 8, 12 , 18 and 28 GPa indicating electronic topological transitions (ETTs). Structural parameters, compressibility data and elastic constant reveal anomalies across these ETTs. The computed equation of st… ▽ More Pressure-induced changes in the Fermi surface of Cd up to 40 GPa are studied using highly accurate density-functional theory calculations. The topology of Fermi surface changes at pressures of 2, 8, 12 , 18 and 28 GPa indicating electronic topological transitions (ETTs). Structural parameters, compressibility data and elastic constant reveal anomalies across these ETTs. The computed equation of state at 300 K is in excellent agreement with the experimental data. In view of the highly controversial nature of these ETTs the present studies are aimed at motivating the experimentalists for their direct detection at high pressures. △ Less

Submitted 6 November, 2015; originally announced November 2015.

Comments: 5 figures

Stress effects on the Raman spectrum of an amorphous material: theory and experiment on a-Si:H

Authors: David A. Strubbe, Eric C. Johlin, Timothy R. Kirkpatrick, Tonio Buonassisi, Jeffrey C. Grossman

Abstract: Strain in a material induces shifts in vibrational frequencies, which is a probe of the nature of the vibrations and interatomic potentials, and can be used to map local stress/strain distributions via Raman microscopy. This method is standard for crystalline silicon devices, but due to lack of calibration relations, it has not been applied to amorphous materials such as hydrogenated amorphous sil… ▽ More Strain in a material induces shifts in vibrational frequencies, which is a probe of the nature of the vibrations and interatomic potentials, and can be used to map local stress/strain distributions via Raman microscopy. This method is standard for crystalline silicon devices, but due to lack of calibration relations, it has not been applied to amorphous materials such as hydrogenated amorphous silicon (a-Si:H), a widely studied material for thin-film photovoltaic and electronic devices. We calculated the Raman spectrum of a-Si:H \ab initio under different strains $ε$ and found peak shifts $Δω= \left( -460 \pm 10\ \mathrm{cm}^{-1} \right) {\rm Tr}\ ε$. This proportionality to the trace of the strain is the general form for isotropic amorphous vibrational modes, as we show by symmetry analysis and explicit computation. We also performed Raman measurements under strain and found a consistent coefficient of $-510 \pm 120\ \mathrm{cm}^{-1}$. These results demonstrate that a reliable calibration for the Raman/strain relation can be achieved even for the broad peaks of an amorphous material, with similar accuracy and precision as for crystalline materials. △ Less

Submitted 3 November, 2015; originally announced November 2015.

Comments: 12 pages, 3 figures + supplementary 8 pages, 4 figures

Journal ref: Phys. Rev. B 92, 241202(R) (2015)

Simulating nanoscale heat transport

Authors: Giuseppe Romano, Jean-Philippe Peraud, Jeffrey C. Grossman

Abstract: In this book chapter we provide the definition of "Simulating Nanoscale Heat Transport", broadly regarded as modeling heat conduction beyond Fourier's law. We primarely focus on incoherent transport, which is dominated by scattering between phonons and the boundaries of a given material. After introducing the Boltzmann Transport Equation (BTE) for phonons, we elaborate on different numerical techn… ▽ More In this book chapter we provide the definition of "Simulating Nanoscale Heat Transport", broadly regarded as modeling heat conduction beyond Fourier's law. We primarely focus on incoherent transport, which is dominated by scattering between phonons and the boundaries of a given material. After introducing the Boltzmann Transport Equation (BTE) for phonons, we elaborate on different numerical techniques for solving nanoscale heat transport includind deterministic and Monte Carlo based method. A discussion on the need for multiscale modeling concludes the chapter. △ Less

Submitted 18 June, 2015; originally announced June 2015.

Direct correlation between aromatization of carbon- rich organic matter and its visible electronic absorption edge

Authors: Nicola Ferralis, Yun Liu, Kyle D. Bake, Andrew E. Pomerantz, Jeffrey C. Grossman

Abstract: The evolution of the electronic absorption edge of type I, II and III kerogen is studied by diffuse reflectance UV-Visible absorption spectroscopy. The functional form of the electronic absorption edge for all kerogens measured is in excellent agreement with the "Urbach tail" phenomenology. The Urbach decay width extracted from the exponential fit within the visible range is strongly correlated wi… ▽ More The evolution of the electronic absorption edge of type I, II and III kerogen is studied by diffuse reflectance UV-Visible absorption spectroscopy. The functional form of the electronic absorption edge for all kerogens measured is in excellent agreement with the "Urbach tail" phenomenology. The Urbach decay width extracted from the exponential fit within the visible range is strongly correlated with the aliphatic/aromatic ratio in isolated kerogen, regardless of the kerogen type. No correlation is found between the decay width and the average size of aromatic clusters, which is explained in terms of a non-linear increase in optical absorption with increasing size of the aromatic clusters determined by 13C NMR. Further, absorption spectra calculated with density functional theory calculations on proxy ensemble models of kerogen are in excellent agreement with the experimental results. The correlation of the decay width with conventional maturity indicators such as vitrinite reflectance is found to be good within a particular kerogen type, but not consistent across different kerogen types, reflecting systematic variations in bulk composition for different type kerogen types with the same vitrinite reflectance. Thus, diffuse reflectance visible absorption spectroscopy is presented as a rapid, calibrated and non-destructive method to monitor both the maturity and the chemical composition of kerogen. The chemical insight of kerogen in relation to its optical absorption provided by this methodology may serve for rapid screening of kerogen for electronics and optical devices in place of functionalized produced carbon. △ Less

Submitted 2 March, 2015; originally announced March 2015.

Comments: 26 pages, 10 figures. To appear in "Carbon"

Toward phonon-boundary engineering in nanoporous materials

Authors: Giuseppe Romano, Jeffrey C. Grossman

Abstract: Tuning thermal transport in nanostructured materials is a powerful approach to develop high-efficiency thermoelectric materials. Using a recently developed approach based on the phonon mean free path dependent Boltzmann transport equation, we compute the effective thermal conductivity of nanoporous materials with pores of various shapes and arrangements. We assess the importance of pore-pore dista… ▽ More Tuning thermal transport in nanostructured materials is a powerful approach to develop high-efficiency thermoelectric materials. Using a recently developed approach based on the phonon mean free path dependent Boltzmann transport equation, we compute the effective thermal conductivity of nanoporous materials with pores of various shapes and arrangements. We assess the importance of pore-pore distance in suppressing thermal transport, and identify the pore arrangement that minimizes the thermal conductivity, composed of a periodic arrangement of two misaligned rows of triangular pores. Such a configuration yields a reduction in the thermal conductivity of more than $60 \%$ with respect the simple circular aligned case with the same porosity. △ Less

Submitted 12 June, 2014; originally announced June 2014.

Comments: 4 pages, 4 figures, 1 table

Phonon Diodes and Transistors from Magneto-acoustics

Authors: Sophia R. Sklan, Jeffrey C. Grossman

Abstract: By sculpting the magnetic field applied to magneto-acoustic materials, phonons can be used for information processing. Using a combination of analytic and numerical techniques, we demonstrate designs for diodes (isolators) and transistors that are independent of their conventional, electronic formulation. We analyze the experimental feasibility of these systems, including the sensitivity of the ci… ▽ More By sculpting the magnetic field applied to magneto-acoustic materials, phonons can be used for information processing. Using a combination of analytic and numerical techniques, we demonstrate designs for diodes (isolators) and transistors that are independent of their conventional, electronic formulation. We analyze the experimental feasibility of these systems, including the sensitivity of the circuits to likely systematic and random errors. △ Less

Submitted 25 January, 2014; originally announced January 2014.

Comments: 5 pages, 4 figures

Multiscale Phonon Conduction in Nanostructured Materials Predicted by Bulk Thermal Conductivity Accumulation Function

Authors: Giuseppe Romano, Jeffrey C. Grossman

Abstract: We develop a computational framework, based on the Boltzmann transport equation, with the ability to compute the thermal transport in nanostructured materials of any geometry using as the only input the bulk thermal conductivity accumulation function. The main advantage of our method is twofold. First, while the scattering times and dispersion curves are unknown for most materials, the phonon mean… ▽ More We develop a computational framework, based on the Boltzmann transport equation, with the ability to compute the thermal transport in nanostructured materials of any geometry using as the only input the bulk thermal conductivity accumulation function. The main advantage of our method is twofold. First, while the scattering times and dispersion curves are unknown for most materials, the phonon mean free path distribution can be directly obtained by experiments. As a consequence, a wider range of materials can be simulated than with a frequency-dependent approach. Second, when phonon dispersions are available from first principles calculations, our approach allows one to include easily the whole Brillouen zone in the calculations without discretizing the phonon frequencies for all polarizations, reducing considerably the computational effort. Furthermore, after deriving the ballistic and diffusive limits of our model, we develop a multi-scale scheme that couples phonon transport across different scales, enabling efficient simulations of materials with wide phonon mean free path distributions. After we validate our model against the frequency-dependent approach, we apply the method to porous silicon membranes and find good agreement with experiments on mesoscale pores. By enabling the investigation of thermal transport in unexplored nanostructured materials, our method has potential to advance high-efficiency thermoelectric devices. △ Less

Submitted 16 October, 2014; v1 submitted 30 December, 2013; originally announced December 2013.

Beyond electronics, beyond optics: single circuit parallel computing with phonons

Authors: Sophia Sklan, Jeffrey C. Grossman

Abstract: Phononic computing -- the use of (typically thermal) vibrations for information processing -- is a nascent technology; its capabilities are still being discovered. We analyze an alternative form of phononic computing inspired by optical, rather than electronic, computing. Using the acoustic Faraday effect, we design a phonon gyrator and thereby a means of performing computation through the manipul… ▽ More Phononic computing -- the use of (typically thermal) vibrations for information processing -- is a nascent technology; its capabilities are still being discovered. We analyze an alternative form of phononic computing inspired by optical, rather than electronic, computing. Using the acoustic Faraday effect, we design a phonon gyrator and thereby a means of performing computation through the manipulation of polarization in transverse phonon currents. Moreover, we establish that our gyrators act as generalized transistors and can construct digital logic gates. Exploiting the wave nature of phonons and the similarity of our logic gates, we demonstrate parallel computation within a single circuit, an effect presently unique to phonons. Finally, a generic method of designing these parallel circuits is introduced and used to analyze the feasibility of magneto-acoustic materials in realizing these circuits. △ Less

Submitted 13 January, 2013; originally announced January 2013.

Point-Defect Optical Transitions and Thermal Ionization Energies from Quantum Monte Carlo Methods: Application to F-center Defect in MgO

Authors: Elif Ertekin, Lucas K. Wagner, Jeffrey C. Grossman

Abstract: We present an approach to calculation of point defect optical and thermal ionization energies based on the highly accurate quantum Monte Carlo methods. The use of an inherently many-body theory that directly treats electron correlation offers many improvements over the typically-employed density functional theory Kohn-Sham description. In particular, the use of quantum Monte Carlo methods can help… ▽ More We present an approach to calculation of point defect optical and thermal ionization energies based on the highly accurate quantum Monte Carlo methods. The use of an inherently many-body theory that directly treats electron correlation offers many improvements over the typically-employed density functional theory Kohn-Sham description. In particular, the use of quantum Monte Carlo methods can help overcome the band gap problem and obviate the need for ad-hoc corrections. We demonstrate our approach to the calculation of the optical and thermal ionization energies of the F-center defect in magnesium oxide, and obtain excellent agreement with experimental and/or other high-accuracy computational results. △ Less

Submitted 2 October, 2012; originally announced October 2012.

Semiconducting Monolayer Materials as a Tunable Platform for Excitonic Solar Cells

Authors: Marco Bernardi, Maurizia Palummo, Jeffrey C. Grossman

Abstract: The recent advent of two-dimensional monolayer materials with tunable optoelectronic properties and high carrier mobility offers renewed opportunities for efficient, ultra-thin excitonic solar cells alternative to those based on conjugated polymer and small molecule donors. Using first-principles density functional theory and many-body calculations, we demonstrate that monolayers of hexagonal BN a… ▽ More The recent advent of two-dimensional monolayer materials with tunable optoelectronic properties and high carrier mobility offers renewed opportunities for efficient, ultra-thin excitonic solar cells alternative to those based on conjugated polymer and small molecule donors. Using first-principles density functional theory and many-body calculations, we demonstrate that monolayers of hexagonal BN and graphene (CBN) combined with commonly used acceptors such as PCBM fullerene or semiconducting carbon nanotubes can provide excitonic solar cells with tunable absorber gap, donor-acceptor interface band alignment, and power conversion efficiency, as well as novel device architectures. For the case of CBN-PCBM devices, we predict the limit of power conversion efficiencies to be in the 10 - 20% range depending on the CBN monolayer structure. Our results demonstrate the possibility of using monolayer materials in tunable, efficient, polymer-free thin-film solar cells in which unexplored exciton and carrier transport regimes are at play. △ Less

Submitted 24 June, 2012; originally announced June 2012.

Comments: 7 pages, 5 figures

Nanocarbon-Based photovoltaics

Authors: Marco Bernardi, Jessica Lohrman, Priyank V. Kumar, Alec Kirkeminde, Nicola Ferralis, Jeffrey C. Grossman, Shenqiang Ren

Abstract: Carbon materials are excellent candidates for photovoltaic solar cells: they are Earth-abundant, possess high optical absorption, and superior thermal and photostability. Here we report on solar cells with active layers made solely of carbon nanomaterials that present the same advantages of conjugated polymer-based solar cells - namely solution processable, potentially flexible, and chemically tun… ▽ More Carbon materials are excellent candidates for photovoltaic solar cells: they are Earth-abundant, possess high optical absorption, and superior thermal and photostability. Here we report on solar cells with active layers made solely of carbon nanomaterials that present the same advantages of conjugated polymer-based solar cells - namely solution processable, potentially flexible, and chemically tunable - but with significantly increased photostability and the possibility to revert photodegradation. The device active layer composition is optimized using ab-initio density functional theory calculations to predict type-II band alignment and Schottky barrier formation. The best device fabricated is composed of PC70BM fullerene, semiconducting single-walled carbon nanotubes and reduced graphene oxide. It achieves a power conversion efficiency of 1.3% - a record for solar cells based on carbon as the active material - and shows significantly improved lifetime than a polymer-based device. We calculate efficiency limits of up to 13% for the devices fabricated in this work, comparable to those predicted for polymer solar cells. There is great promise for improving carbon-based solar cells considering the novelty of this type of device, the superior photostability, and the availability of a large number of carbon materials with yet untapped potential for photovoltaics. Our results indicate a new strategy for efficient carbon-based, solution-processable, thin film, photostable solar cells. △ Less

Submitted 24 July, 2012; v1 submitted 21 June, 2012; originally announced June 2012.

Optoelectronic Properties and Excitons in Hybridized Boron Nitride and Graphene Hexagonal Monolayers

Authors: Marco Bernardi, Maurizia Palummo, Jeffrey C. Grossman

Abstract: We explain the nature of the electronic band gap and optical absorption spectrum of Carbon - Boron Nitride (CBN) hybridized monolayers using density functional theory (DFT), GW and Bethe-Salpeter equation calculations. The CBN optoelectronic properties result from the overall monolayer bandstructure, whose quasiparticle states are controlled by the C domain size and lie at separate energy for C an… ▽ More We explain the nature of the electronic band gap and optical absorption spectrum of Carbon - Boron Nitride (CBN) hybridized monolayers using density functional theory (DFT), GW and Bethe-Salpeter equation calculations. The CBN optoelectronic properties result from the overall monolayer bandstructure, whose quasiparticle states are controlled by the C domain size and lie at separate energy for C and BN without significant mixing at the band edge, as confirmed by the presence of strongly bound bright exciton states localized within the C domains. The resulting absorption spectra show two marked peaks whose energy and relative intensity vary with composition in agreement with the experiment, with large compensating quasiparticle and excitonic corrections compared to DFT calculations. The band gap and the optical absorption are not regulated by the monolayer composition as customary for bulk semiconductor alloys and cannot be understood as a superposition of the properties of bulk-like C and BN domains as recent experiments suggested. △ Less

Submitted 6 April, 2012; originally announced April 2012.

Journal ref: Phys. Rev. Lett. 108 (2012), 226805

Solar Energy Generation in Three Dimensions

Authors: Marco Bernardi, Nicola Ferralis, Jin H. Wan, Rachelle Villalon, Jeffrey C. Grossman

Abstract: We formulate, solve computationally and study experimentally the problem of collecting solar energy in three dimensions(1-5). We demonstrate that absorbers and reflectors can be combined in the absence of sun tracking to build three-dimensional photovoltaic (3DPV) structures that can generate measured energy densities (energy per base area, kWh/m2) higher by a factor of 2-20 than stationary flat P… ▽ More We formulate, solve computationally and study experimentally the problem of collecting solar energy in three dimensions(1-5). We demonstrate that absorbers and reflectors can be combined in the absence of sun tracking to build three-dimensional photovoltaic (3DPV) structures that can generate measured energy densities (energy per base area, kWh/m2) higher by a factor of 2-20 than stationary flat PV panels, versus an increase by a factor of 1.3-1.8 achieved with a flat panel using dual-axis sun tracking(6). The increased energy density is countered by a higher solar cell area per generated energy for 3DPV compared to flat panel design (by a factor of 1.5-4 in our conditions), but accompanied by a vast range of improvements. 3DPV structures are steadier sources of solar energy generation at all latitudes: they can double the number of peak power generation hours and dramatically reduce the seasonal, latitude and weather variations of solar energy generation compared to a flat panel design. Self-supporting 3D shapes can create new schemes for PV installation and the increased energy density can facilitate the use of cheaper thin film materials in area-limited applications. Our findings suggest that harnessing solar energy in three dimensions can open new avenues towards Terawatt-scale generation. △ Less

Submitted 10 March, 2012; v1 submitted 14 December, 2011; originally announced December 2011.

Comments: 40 pages, 16 pages paper (3 figures), 24 pages supplementary information (7 figures). Energy and Environmental Science (2012, Published on-line)

Insulator-to-Metal Transition in Selenium-Hyperdoped Silicon: Observation and Origin

Authors: Elif Ertekin, Mark T. Winkler, Daniel Recht, Aurore J. Said, Michael J. Aziz, Tonio Buonassisi, Jeffrey C. Grossman

Abstract: Hyperdoping has emerged as a promising method for designing semiconductors with unique optical and electronic properties, although such properties currently lack a clear microscopic explanation. Combining computational and experimental evidence, we probe the origin of sub-band gap optical absorption and metallicity in Se-hyperdoped Si. We show that sub-band gap absorption arises from direct defect… ▽ More Hyperdoping has emerged as a promising method for designing semiconductors with unique optical and electronic properties, although such properties currently lack a clear microscopic explanation. Combining computational and experimental evidence, we probe the origin of sub-band gap optical absorption and metallicity in Se-hyperdoped Si. We show that sub-band gap absorption arises from direct defect-to-conduction band transitions rather than free carrier absorption. Density functional theory predicts the Se-induced insulator-to-metal transition arises from merging of defect and conduction bands, at a concentration in excellent agreement with experiment. Quantum Monte Carlo calculations confirm the critical concentration, demonstrate that correlation is important to describing the transition accurately, and suggest that it is a classic impurity-driven Mott transition. △ Less

Submitted 22 November, 2011; originally announced November 2011.

Comments: 5 pages, 3 figures (PRL formatted)

Quantum Monte Carlo for minimum energy structures

Authors: Lucas K. Wagner, Jeffrey C. Grossman

Abstract: We present an efficient method to find minimum energy structures using energy estimates from accurate quantum Monte Carlo calculations. This method involves a stochastic process formed from the stochastic energy estimates from Monte Carlo that can be averaged to find precise structural minima while using inexpensive calculations with moderate statistical uncertainty. We demonstrate the applicabili… ▽ More We present an efficient method to find minimum energy structures using energy estimates from accurate quantum Monte Carlo calculations. This method involves a stochastic process formed from the stochastic energy estimates from Monte Carlo that can be averaged to find precise structural minima while using inexpensive calculations with moderate statistical uncertainty. We demonstrate the applicability of the algorithm by minimizing the energy of the H2O-OH- complex and showing that the structural minima from quantum Monte Carlo calculations affect the qualitative behavior of the potential energy surface substantially. △ Less

Submitted 3 May, 2010; originally announced May 2010.

Comments: 7 pages, 4 figures

Role of Exchange in Density Functional Theory for Weakly-Interacting Systems: Quantum Monte Carlo Analysis of Electron Density and Interaction Energy

Authors: Yosuke Kanai, Jeffrey C. Grossman

Abstract: We analyze the density functional theory (DFT) description of weak interactions by employing diffusion and reptation quantum Monte Carlo (QMC) calculations, for a set of benzene-molecule complexes. While the binding energies depend significantly on the exchange correlation approximation employed for DFT calculations, QMC calculations show that the electron density is accurately described within… ▽ More We analyze the density functional theory (DFT) description of weak interactions by employing diffusion and reptation quantum Monte Carlo (QMC) calculations, for a set of benzene-molecule complexes. While the binding energies depend significantly on the exchange correlation approximation employed for DFT calculations, QMC calculations show that the electron density is accurately described within DFT, including the quantitative features in the reduced density gradient. We elucidate how the enhancement of the exchange energy density at a large reduced density gradient plays a critical role in obtaining accurate DFT description of weakly-interacting systems. △ Less

Submitted 12 September, 2009; originally announced September 2009.

Comments: 6 Pages, 3 figures, In press at Phys. Rev. A

Strain engineering and one-dimensional organization of metal-insulator domains in single-crystal VO2 beams

Authors: J. Cao, E. Ertekin, V. Srinivasan, W. Fan, S. Huang, H. Zheng, J. W. L. Yim, D. R. Khanal, D. F. Ogletree, J. C. Grossman, J. Wu

Abstract: Spatial phase inhomogeneity at the nano- to microscale is widely observed in strongly-correlated electron materials. The underlying mechanism and possibility of artificially controlling the phase inhomogeneity are still open questions of critical importance for both the phase transition physics and device applications. Lattice strain has been shown to cause the coexistence of metallic and insula… ▽ More Spatial phase inhomogeneity at the nano- to microscale is widely observed in strongly-correlated electron materials. The underlying mechanism and possibility of artificially controlling the phase inhomogeneity are still open questions of critical importance for both the phase transition physics and device applications. Lattice strain has been shown to cause the coexistence of metallic and insulating phases in the Mott insulator VO2. By continuously tuning strain over a wide range in single-crystal VO2 micro- and nanobeams, here we demonstrate the nucleation and manipulation of one-dimensionally ordered metal-insulator domain arrays along the beams. Mott transition is achieved in these beams at room temperature by active control of strain. The ability to engineer phase inhomogeneity with strain lends insight into correlated electron materials in general, and opens opportunities for designing and controlling the phase inhomogeneity of correlated electron materials for micro- and nanoscale device applications. △ Less

Submitted 27 July, 2009; originally announced July 2009.

Comments: 14 pages, 4 figures, with supplementary information

A microscopic description of light induced defects in amorphous silicon solar cells

Authors: Lucas K. Wagner, Jeffrey C. Grossman

Abstract: Using a combination of quantum and classical computational approaches, we model the electronic structure in amorphous silicon in order gain understanding of the microscopic atomic configurations responsible for light induced degradation of solar cells. We demonstrate that regions of strained silicon bonds could be as important as dangling bonds for creating traps for charge carriers. Further, ou… ▽ More Using a combination of quantum and classical computational approaches, we model the electronic structure in amorphous silicon in order gain understanding of the microscopic atomic configurations responsible for light induced degradation of solar cells. We demonstrate that regions of strained silicon bonds could be as important as dangling bonds for creating traps for charge carriers. Further, our results show that defects are preferentially formed when a region in the amorphous silicon contains a hole and a light-induced excitation. These results agree with the puzzling dependencies on temperature, time, and pressure observed experimentally. △ Less

Submitted 8 July, 2008; originally announced July 2008.

Comments: 5 pages, 4 figures

The electronic structure of liquid water within density functional theory

Authors: David Prendergast, Jeffrey C. Grossman, Giulia Galli

Abstract: In the last decade, computational studies of liquid water have mostly concentrated on ground state properties. However recent spectroscopic measurements have been used to infer the structure of water, and the interpretation of optical and x-ray spectra requires accurate theoretical models of excited electronic states, not only of the ground state. To this end, we investigate the electronic prope… ▽ More In the last decade, computational studies of liquid water have mostly concentrated on ground state properties. However recent spectroscopic measurements have been used to infer the structure of water, and the interpretation of optical and x-ray spectra requires accurate theoretical models of excited electronic states, not only of the ground state. To this end, we investigate the electronic properties of water at ambient conditions using ab initio density functional theory within the generalized gradient approximation (DFT/GGA), focussing on the unoccupied subspace of Kohn-Sham eigenstates. We generate long (250 ps) classical trajectories for large supercells, up to 256 molecules, from which uncorrelated configurations of water molecules are extracted for use in DFT/GGA calculations of the electronic structure. We find that the density of occupied states of this molecular liquid is well described with 32 molecule supercells using a single k-point (k = 0) to approximate integration over the first Brillouin zone. However, the description of the density of unoccupied states (u-EDOS) is sensitive to finite size effects. Small, 32 molecule supercell calculations, using Gamma-the point approximation, yield a spuriously isolated state above the Fermi level. Nevertheless, the more accurate u-EDOS of large, 256 molecule supercells may be reproduced using smaller supercells and increased k-point sampling. This indicates that the electronic structure of molecular liquids like water is relatively insensitive to the long-range disorder in the molecular structure. These results have important implications for efficiently increasing the accuracy of spectral calculations for water and other molecular liquids. △ Less

Submitted 31 January, 2005; originally announced February 2005.

Comments: 12 pages, 11 figures (low quality) Submitted to JChemPhys

Optical properties of silicon nanoparticles in the presence of water: A first principles theoretical analysis

Authors: David Prendergast, Jeffrey C. Grossman, Andrew J. Williamson, Jean-Luc Fattebert, Giulia Galli

Abstract: We investigate the impact of water, a polar solvent, on the optical absorption of prototypical silicon clusters with oxygen passivation. We approach this complex problem by assessing the contributions of three factors: chemical reactivity; thermal equilibration and dielectric screening. We find that the silanone (Si=O) functional group is not chemically stable in the presence of water and exclud… ▽ More We investigate the impact of water, a polar solvent, on the optical absorption of prototypical silicon clusters with oxygen passivation. We approach this complex problem by assessing the contributions of three factors: chemical reactivity; thermal equilibration and dielectric screening. We find that the silanone (Si=O) functional group is not chemically stable in the presence of water and exclude this as a source of significant red shift in absorption in aqueous environments. We perform first principles molecular dynamics simulations of the solvation of an oxygenated silicon cluster with explicit water molecules at 300 K. We find a systematic 0.7 eV red shift in the absorption gap of this cluster, which we attribute to thermal strain of the molecular structure. Surprisingly, we find no observable screening impact of the solvent, in contrast with consistent blue shifts observed for similarly sized organic molecules in polar solvents. The predicted red shift is expected to be significantly smaller for larger Si quantum dots produced experimentally, guaranteeing that their vacuum optical properties are preserved even in aqueous environments. △ Less

Submitted 6 April, 2004; originally announced April 2004.

Comments: 11 pages, 7 figures, 3 tables. submitted to JACS

The Structure and Stokes Shift of Hydrogenated Silicon Nanoclusters

Authors: Lucas Wagner, Aaron Puzder, Andrew Williamson, Zachary Helms, Jeffrey C. Grossman, Lubos Mitas, Giulia Galli, Munir Nayfeh

Abstract: We evaluate the optical gap and Stokes shift of several candidate 1 nm silicon nanocrystal structures using density functional and quantum Monte Carlo (QMC) methods. We find that the combination of absorption gap calculations and Stokes shift calculations may be used to determine structures. We find that although absorption gaps calculated within B3LYP and QMC agree for spherical, completely hyd… ▽ More We evaluate the optical gap and Stokes shift of several candidate 1 nm silicon nanocrystal structures using density functional and quantum Monte Carlo (QMC) methods. We find that the combination of absorption gap calculations and Stokes shift calculations may be used to determine structures. We find that although absorption gaps calculated within B3LYP and QMC agree for spherical, completely hydrogenated silicon nanocrystals, they disagree in clusters with different surface bonding networks. The nature of the Stokes shift of the ultrabright luminescence is examined by comparing possible relaxation mechanisms. We find that the exciton which reproduces the experimental value of the Stokes shift is most likely a state formed by a collective structural relaxation distributed over the entire cluster. △ Less

Submitted 8 March, 2004; originally announced March 2004.

High Accuracy Many-Body Calculational Approaches for Excitations in Molecules

Authors: Jeffrey C. Grossman, Michael Rohlfing, Lubos Mitas, Steven G. Louie, Marvin L. Cohen

Abstract: Two state-of-the-art computational approaches: quantum Monte Carlo (QMC), based on accurate total energies, and GW with exciton effects (GW-BSE), based on perturbation theory are employed to calculate ionization potentials, electron affinities, and first excited singlet and triplet energies for the silane and methane molecules. Results are in excellent agreement between these dramatically differ… ▽ More Two state-of-the-art computational approaches: quantum Monte Carlo (QMC), based on accurate total energies, and GW with exciton effects (GW-BSE), based on perturbation theory are employed to calculate ionization potentials, electron affinities, and first excited singlet and triplet energies for the silane and methane molecules. Results are in excellent agreement between these dramatically different approaches and with available experiment. The optically forbidden triplet excitation in silane is predicted to lie roughly 1 eV higher than previously reported. For methane, the impact of geometry relaxation is shown to be $\sim$ 2 eV for excited states. Further, in the GW-BSE method, we demonstrate that inclusion of off-diagonal matrix elements in the self-energy operator is crucial for an accurate picture. △ Less

Submitted 17 November, 2000; originally announced November 2000.

Comments: Accepted to Physical Review Letters (11/15/00)