-
Quantitative Comparison of the Total Focusing Method, Reverse Time Migration, and Full Waveform Inversion for Ultrasonic Imaging
Authors:
Tim Bürchner,
Simon Schmid,
Lukas Bergbreiter,
Ernst Rank,
Stefan Kollmannsberger,
Christian U. Grosse
Abstract:
Phased array ultrasound is a widely used technique in non-destructive testing. Using piezoelectric elements as both sources and receivers provides a significant gain in information and enables more accurate defect detection. When all source-receiver combinations are used, the process is called full matrix capture. The total focusing method~(TFM), which exploits such datasets, relies on a delay and…
▽ More
Phased array ultrasound is a widely used technique in non-destructive testing. Using piezoelectric elements as both sources and receivers provides a significant gain in information and enables more accurate defect detection. When all source-receiver combinations are used, the process is called full matrix capture. The total focusing method~(TFM), which exploits such datasets, relies on a delay and sum algorithm to sum up the signals on a pixel grid. However, TFM only uses the first arriving p-waves, making it challenging to size complex-shaped defects. By contrast, more advanced methods such as reverse time migration~(RTM) and full waveform inversion~(FWI) use full waveforms to reconstruct defects. Both methods compare measured signals with ultrasound simulations. While RTM identifies defects by convolving forward and backward wavefields once, FWI iteratively updates material models to reconstruct the actual distribution of material properties. This study compares TFM, RTM, and FWI for six specimens featuring circular defects or Y-shaped notches. The reconstructed results are first evaluated qualitatively using different thresholds and then quantitatively using metrics such as AUPRC, AUROC, and F1-score. The results show that FWI performs best in most cases, both qualitatively and quantitatively.
△ Less
Submitted 10 December, 2024;
originally announced December 2024.
-
Modulation to the Rescue: Identifying Sub-Circuitry in the Transistor Morass for Targeted Analysis
Authors:
Xhani Marvin Saß,
Thilo Krachenfels,
Frederik Dermot Pustelnik,
Jean-Pierre Seifert,
Christian Große,
Frank Altmann
Abstract:
Physical attacks form one of the most severe threats against secure computing platforms. Their criticality arises from their corresponding threat model: By, e.g., passively measuring an integrated circuit's (IC's) environment during a security-related operation, internal secrets may be disclosed. Furthermore, by actively disturbing the physical runtime environment of an IC, an adversary can cause…
▽ More
Physical attacks form one of the most severe threats against secure computing platforms. Their criticality arises from their corresponding threat model: By, e.g., passively measuring an integrated circuit's (IC's) environment during a security-related operation, internal secrets may be disclosed. Furthermore, by actively disturbing the physical runtime environment of an IC, an adversary can cause a specific, exploitable misbehavior. The set of physical attacks consists of techniques that apply either globally or locally. When compared to global techniques, local techniques exhibit a much higher precision, hence having the potential to be used in advanced attack scenarios. However, using physical techniques with additional spatial dependency expands the parameter search space exponentially. In this work, we present and compare two techniques, namely laser logic state imaging (LLSI) and lock-in thermography (LIT), that can be used to discover sub-circuitry of an entirely unknown IC based on optical and thermal principles. We show that the time required to identify specific regions can be drastically reduced, thus lowering the complexity of physical attacks requiring positional information. Our case study on an Intel H610 Platform Controller Hub showcases that, depending on the targeted voltage rail, our technique reduces the search space by around 90 to 98 percent.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Tuning metal/superconductor to insulator/superconductor coupling via control of proximity enhancement between NbSe$_2$ monolayers
Authors:
Olivio Chiatti,
Klara Mihov,
Theodor U. Griffin,
Corinna Grosse,
Matti B. Alemayehu,
Kyle Hite,
Danielle Hamann,
Anna Mogilatenko,
David C. Johnson,
Saskia F. Fischer
Abstract:
The interplay between charge transfer and electronic disorder in transition-metal dichalcogenide multilayers gives rise to superconductive coupling driven by proximity enhancement, tunneling and superconducting fluctuations, of a yet unwieldy variety. Artificial spacer layers introduced with atomic precision change the density of states by charge transfer. Here, we tune the superconductive couplin…
▽ More
The interplay between charge transfer and electronic disorder in transition-metal dichalcogenide multilayers gives rise to superconductive coupling driven by proximity enhancement, tunneling and superconducting fluctuations, of a yet unwieldy variety. Artificial spacer layers introduced with atomic precision change the density of states by charge transfer. Here, we tune the superconductive coupling between NbSe$_2$ monolayers from proximity-enhanced to tunneling-dominated. We correlate normal and superconducting properties in [(SnSe)$_{1+δ}$]$_m$[NbSe$_2$]$_1$ tailored multilayers with varying SnSe layer thickness. From high-field magnetotransport the critical fields yield Ginzburg-Landau coherence lengths with an increase of 140 % cross-plane , trending towards two-dimensional superconductivity for m > 9. We show cross-over between three regimes: metallic with proximity-enhanced coupling, disordered-metallic with intermediate coupling and insulating with Josephson tunneling. Our results demonstrate that stacking metal mono- and dichalcogenides allows to convert a metal/superconductor into an insulator/superconductor system, prospecting the control of two-dimensional superconductivity in embedded layers.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
A single hydrogen molecule as an intensity chopper in an electrically-driven plasmonic nanocavity
Authors:
Pablo Merino,
Anna Rosławska,
Christopher C. Leon,
Abhishek Grewal,
Christoph Große,
Cesar González,
Klaus Kuhnke,
Klaus Kern
Abstract:
Photon statistics is a powerful tool for characterizing the emission dynamics of nanoscopic systems and their photophysics. Recent advances that combine correlation spectroscopy with scanning tunneling microscopy-induced luminescence (STML) have allowed measuring the emission dynamics from individual molecules and defects demonstrating their nature as single photon emitters. The application of cor…
▽ More
Photon statistics is a powerful tool for characterizing the emission dynamics of nanoscopic systems and their photophysics. Recent advances that combine correlation spectroscopy with scanning tunneling microscopy-induced luminescence (STML) have allowed measuring the emission dynamics from individual molecules and defects demonstrating their nature as single photon emitters. The application of correlation spectroscopy to the analysis of the dynamics of a well-characterized adsorbate system in ultrahigh vacuum remained to be shown. Here we combine single photon time correlations with STML to measure the dynamics of individual $H_2$ molecules between a gold tip and a Au(111) surface. An adsorbed $H_2$ molecule performs recurrent excursions below the tip apex. We use the fact that the presence of the $H_2$ molecule in the junction modifies plasmon emission to study the adsorbate dynamics. Using the $H_2$ molecule as a chopper for STM-induced optical emission intensity we demonstrate bunching in the plasmonic photon train in a single measurement over six orders of magnitude in the time domain (from microseconds to seconds) that takes only a few seconds. Our findings illustrate the power of using photon statistics to measure the diffusion dynamics of adsorbates with STML.
△ Less
Submitted 19 December, 2018; v1 submitted 20 September, 2018;
originally announced September 2018.
-
Microfabricated sensor platform with through-glass vias for bidirectional 3-omega thermal characterization of solid and liquid samples
Authors:
Corinna Grosse,
Mohamad Abo Ras,
Aapo Varpula,
Kestutis Grigoras,
Daniel May,
Bernhard Wunderle,
Pierre-Olivier Chapuis,
Séverine Gomès,
Mika Prunnila
Abstract:
A novel microfabricated, all-electrical measurement platform is presented for a direct, accurate and rapid determination of the thermal conductivity and diffusivity of liquid and solid materials. The measurement approach is based on the bidirectional 3-omega method. The platform is composed of glass substrates on which sensor structures and a very thin dielectric nanolaminate passivation layer are…
▽ More
A novel microfabricated, all-electrical measurement platform is presented for a direct, accurate and rapid determination of the thermal conductivity and diffusivity of liquid and solid materials. The measurement approach is based on the bidirectional 3-omega method. The platform is composed of glass substrates on which sensor structures and a very thin dielectric nanolaminate passivation layer are fabricated. Using through-glass vias for contacting the sensors from the chip back side leaves the top side of the platform free for deposition, manipulation and optical inspection of the sample during 3-omega measurements. The thin passivation layer, which is deposited by atomic layer deposition on the platform surface, provides superior chemical resistance and allows for the measurement of electrically conductive samples, while maintaining the conditions for a simple thermal analysis. We demonstrate the measurement of thermal conductivities of borosilicate glass, pure water, glycerol, 2-propanol, PDMS, cured epoxy, and heat-sink compounds. The results compare well with both literature values and values obtained with the steady-state divided bar method. Small sample volumes (~0.02 mm$^2$) suffice for accurate measurements using the platform, allowing rapid temperature-dependent measurements of thermal properties, which can be useful for the development, optimization and quality testing of many materials, such as liquids, gels, pastes and solids.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
Single charge and exciton dynamics probed by molecular-scale-induced electroluminescence
Authors:
Anna Rosławska,
Pablo Merino,
Christoph Große,
Christopher C. Leon,
Olle Gunnarsson,
Markus Etzkorn,
Klaus Kuhnke,
Klaus Kern
Abstract:
Excitons and their constituent charge carriers play the central role in electroluminescence mechanisms determining the ultimate performance of organic optoelectronic devices. The involved processes and their dynamics are often studied with time-resolved techniques limited by spatial averaging that obscures the properties of individual electron-hole pairs. Here we overcome this limit and characteri…
▽ More
Excitons and their constituent charge carriers play the central role in electroluminescence mechanisms determining the ultimate performance of organic optoelectronic devices. The involved processes and their dynamics are often studied with time-resolved techniques limited by spatial averaging that obscures the properties of individual electron-hole pairs. Here we overcome this limit and characterize single charge and exciton dynamics at the nanoscale by using time-resolved scanning tunnelling microscopy-induced luminescence (TR-STML) stimulated with nanosecond voltage pulses. We use isolated defects in C$_{60}$ thin films as a model system into which we inject single charges and investigate the formation dynamics of a single exciton. Tuneable hole and electron injection rates are obtained from a kinetic model that reproduces the measured electroluminescent transients. These findings demonstrate that TR-STML can track dynamics at the quantum limit of single charge injection and can be extended to other systems and materials important for nanophotonic devices.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Strong-coupling of WSe2 in ultra-compact plasmonic nanocavities at room temperature
Authors:
Marie-Elena Kleemann,
Rohit Chikkaraddy,
Evgeny M. Alexeev,
Dean Kos,
Cloudy Carnegie,
Will Deacon,
Alex de Casalis de Pury,
Christoph Grosse,
Bart de Nijs,
Jan Mertens,
Alexander I Tartakovskii,
Jeremy J Baumberg
Abstract:
Strong-coupling of monolayer metal dichalcogenide semiconductors with light offers encouraging prospects for realistic exciton devices at room temperature. However, the nature of this coupling depends extremely sensitively on the optical confinement and the orientation of electronic dipoles and fields. Here, we show how plasmon strong coupling can be achieved in compact robust easily-assembled gol…
▽ More
Strong-coupling of monolayer metal dichalcogenide semiconductors with light offers encouraging prospects for realistic exciton devices at room temperature. However, the nature of this coupling depends extremely sensitively on the optical confinement and the orientation of electronic dipoles and fields. Here, we show how plasmon strong coupling can be achieved in compact robust easily-assembled gold nano-gap resonators at room temperature. We prove that strong coupling is impossible with monolayers due to the large exciton coherence size, but resolve clear anti-crossings for 8 layer devices with Rabi splittings exceeding 135 meV. We show that such structures improve on prospects for nonlinear exciton functionalities by at least 10^4, while retaining quantum efficiencies above 50%.
△ Less
Submitted 10 April, 2017;
originally announced April 2017.
-
Evolution of percolating force chains in compressed granular media
Authors:
Raul Cruz Hidalgo,
Christian U. Grosse,
Ferenc Kun,
Hans W. Reinhardt,
Hans J. Herrmann
Abstract:
The evolution of effective force chains percolating through a compressed granular system is investigated. We performed experiments by compressing an ensemble of spherical particles in a cylindrical container monitoring the macroscopic constitutive behavior and the acoustic signals emitted by microscopic rearrangements of particles. As a novel approach, we applied the continuous damage model of f…
▽ More
The evolution of effective force chains percolating through a compressed granular system is investigated. We performed experiments by compressing an ensemble of spherical particles in a cylindrical container monitoring the macroscopic constitutive behavior and the acoustic signals emitted by microscopic rearrangements of particles. As a novel approach, we applied the continuous damage model of fiber bundles to describe the evolution of the array of force chains during the loading process. The model provides a nonlinear constitutive behavior in good quantitative agreement with the experimental results. For a system of hard particles the model predicts a universal power law divergence of stress when approaching a critical deformation. The amplitude distribution of acoustic signals was found experimentally to follow a power law with exponent $δ= 1.15 \pm 0.05$ which is in a good agreement with the analytic solution of the model.
△ Less
Submitted 3 April, 2002;
originally announced April 2002.
