-
Technical Report -- Comparison of Direct Finite Element Simulation with Actuator Line Models and Vortex Models for Simulation of Turbulent Flow Past a Vertical Axis wind Turbine
Authors:
Van-Dang Nguyen,
Johan Jansson,
Anders Goude,
Johan Hoffman
Abstract:
We compare three different methodologies for simulation of turbulent flow past a vertical axis wind turbine: (i) full resolution of the turbine blades in a Direct Finite Element Simulation (DFS), (ii) implicit representation of the turbine blades in a 3D Actuator Line Method (ALM), and (iii) implicit representation of the turbine blades as sources in a Vortex Model (VM). The integrated normal forc…
▽ More
We compare three different methodologies for simulation of turbulent flow past a vertical axis wind turbine: (i) full resolution of the turbine blades in a Direct Finite Element Simulation (DFS), (ii) implicit representation of the turbine blades in a 3D Actuator Line Method (ALM), and (iii) implicit representation of the turbine blades as sources in a Vortex Model (VM). The integrated normal force on one blade is computed for a range of azimuthal angles, and is compared to experimental data for the different tip speed ratios, 2.55, 3.44 and 4.09.
△ Less
Submitted 30 August, 2019;
originally announced September 2019.
-
A general high order two-dimensional panel method
Authors:
Anders Goude,
Stefan Engblom
Abstract:
We develop an efficient and high order panel method with applications in airfoil design. Through the use of analytic work and careful considerations near singularities our approach is quadrature-free. The resulting method is examined with respect to accuracy and efficiency and we discuss the different trade-offs in approximation order and computational complexity. A reference implementation within…
▽ More
We develop an efficient and high order panel method with applications in airfoil design. Through the use of analytic work and careful considerations near singularities our approach is quadrature-free. The resulting method is examined with respect to accuracy and efficiency and we discuss the different trade-offs in approximation order and computational complexity. A reference implementation within a package for a two-dimensional fast multipole method is distributed freely.
△ Less
Submitted 20 December, 2017; v1 submitted 11 May, 2017;
originally announced May 2017.
-
Actuator line modeling of vertical-axis turbines
Authors:
Peter Bachant,
Anders Goude,
Martin Wosnik
Abstract:
To bridge the gap between high and low fidelity numerical modeling tools for vertical-axis (or cross-flow) turbines (VATs or CFTs), an actuator line model (ALM) was developed and validated for both a high and a medium solidity vertical-axis turbine at rotor diameter Reynolds numbers $Re_D \sim 10^6$. The ALM is a combination of classical blade element theory and Navier--Stokes based flow models, a…
▽ More
To bridge the gap between high and low fidelity numerical modeling tools for vertical-axis (or cross-flow) turbines (VATs or CFTs), an actuator line model (ALM) was developed and validated for both a high and a medium solidity vertical-axis turbine at rotor diameter Reynolds numbers $Re_D \sim 10^6$. The ALM is a combination of classical blade element theory and Navier--Stokes based flow models, and in this study both $k$--$ε$ Reynolds-averaged Navier--Stokes (RANS) and Smagorinsky large eddy simulation (LES) turbulence models were tested using the open-source OpenFOAM computational fluid dynamics framework. The RANS models were able to be run on coarse grids while still providing good convergence behavior in terms of the mean power coefficient, and also approximately four orders of magnitude reduction in computational expense compared with 3-D blade-resolved RANS simulations. Submodels for dynamic stall, end effects, added mass, and flow curvature were implemented, resulting in reasonable performance predictions for the high solidity rotor, more discrepancies for the medium solidity rotor, and overprediction for both cases at high tip speed ratio. The wake results showed that the ALM was able to capture some of the important flow features that contribute to VAT's relatively fast wake recovery---a large improvement over the conventional actuator disk model. The mean flow field was better realized with the LES, which still represented a computational savings of two orders of magnitude compared with 3-D blade-resolved RANS, though vortex breakdown and subsequent turbulence generation appeared to be underpredicted, which necessitates further investigation of optimal subgrid scale modeling.
△ Less
Submitted 22 September, 2018; v1 submitted 4 May, 2016;
originally announced May 2016.
-
Dynamic autotuning of adaptive fast multipole methods on hybrid multicore CPU & GPU systems
Authors:
Marcus Holm,
Stefan Engblom,
Anders Goude,
Sverker Holmgren
Abstract:
We discuss an implementation of adaptive fast multipole methods targeting hybrid multicore CPU- and GPU-systems. From previous experiences with the computational profile of our version of the fast multipole algorithm, suitable parts are off-loaded to the GPU, while the remaining parts are threaded and executed concurrently by the CPU. The parameters defining the algorithm affects the performance a…
▽ More
We discuss an implementation of adaptive fast multipole methods targeting hybrid multicore CPU- and GPU-systems. From previous experiences with the computational profile of our version of the fast multipole algorithm, suitable parts are off-loaded to the GPU, while the remaining parts are threaded and executed concurrently by the CPU. The parameters defining the algorithm affects the performance and by measuring this effect we are able to dynamically balance the algorithm towards optimal performance. Our setup uses the dynamic nature of the computations and is therefore of general character.
△ Less
Submitted 17 March, 2014; v1 submitted 5 November, 2013;
originally announced November 2013.
-
Adaptive fast multipole methods on the GPU
Authors:
Anders Goude,
Stefan Engblom
Abstract:
We present a highly general implementation of fast multipole methods on graphics processing units (GPUs). Our two-dimensional double precision code features an asymmetric type of adaptive space discretization leading to a particularly elegant and flexible implementation. All steps of the multipole algorithm are efficiently performed on the GPU, including the initial phase which assembles the topol…
▽ More
We present a highly general implementation of fast multipole methods on graphics processing units (GPUs). Our two-dimensional double precision code features an asymmetric type of adaptive space discretization leading to a particularly elegant and flexible implementation. All steps of the multipole algorithm are efficiently performed on the GPU, including the initial phase which assembles the topological information of the input data. Through careful timing experiments we investigate the effects of the various peculiarities of the GPU architecture.
△ Less
Submitted 8 October, 2012; v1 submitted 21 May, 2012;
originally announced May 2012.
