-
Coherence effects in LIPSS formation on silicon wafers upon picosecond laser pulse irradiations
Authors:
Inam Mirza,
Juraj Sládek,
Yoann Levy,
Alexander V. Bulgakov,
Vasilis Dimitriou,
Helen Papadaki,
Evaggelos Kaselouris,
Paulius Gecys,
Gediminas Račiukaitis,
Nadezhda M. Bulgakova
Abstract:
Using different laser irradiation patterns to modify of silicon surface, it has been demonstrated that, at rather small overlapping between irradiation spots, highly regular laser-induced periodic surface structures (LIPSS) can be produced already starting from the second laser pulse, provided that polarization direction coincides with the scanning direction. If the laser irradiation spot is shift…
▽ More
Using different laser irradiation patterns to modify of silicon surface, it has been demonstrated that, at rather small overlapping between irradiation spots, highly regular laser-induced periodic surface structures (LIPSS) can be produced already starting from the second laser pulse, provided that polarization direction coincides with the scanning direction. If the laser irradiation spot is shifted from the previous one perpendicular to light polarization, LIPSS are not formed even after many pulses. This coherence effect is explained by a three-wave interference, - surface electromagnetic waves (SEWs) generated within the irradiated spot, SEWs scattered from the crater edge formed by the previous laser pulse, and the incoming laser pulse, - providing conditions for amplification of the periodic light-absorption pattern. To study possible consequences of SEW scattering from the laser-modified regions, where the refractive index can change due to material melting, amorphization, and the residual stress formed by previous laser pulses, hydrodynamic modelling and simulations have been performed within the melting regime. The simulations show that stress and vertical displacement could be amplified upon laser scanning. Both mechanisms, three-wave interference and stress accumulation, could enable an additional degree of controlling surface structuring.
△ Less
Submitted 3 December, 2024; v1 submitted 18 November, 2024;
originally announced November 2024.
-
Highly-efficient electron ponderomotive acceleration in underdense plasmas
Authors:
Lorenzo Martelli,
Olena Kononenko,
Igor Andriyash,
Jonathan Wheeler,
Julien Gautier,
Jean-Philippe Goddet,
Amar Tafzi,
Ronan Lahaye,
Camilla Giaccaglia,
Alessandro Flacco,
Vidmantas Tomkus,
Migle Mackevičiūtė,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gečys,
Gediminas Račiukaitis,
Henri Kraft,
Xuan Quyen Dinh,
Cédric Thaury
Abstract:
Laser-plasma accelerators represent a promising technology for future compact accelerating systems, enabling the acceleration of tens of pC to above $1\,$GeV over just a few centimeters. Nonetheless, these devices currently lack the stability, beam quality and average current of conventional systems. While many efforts have focused on improving acceleration stability and quality, little progress h…
▽ More
Laser-plasma accelerators represent a promising technology for future compact accelerating systems, enabling the acceleration of tens of pC to above $1\,$GeV over just a few centimeters. Nonetheless, these devices currently lack the stability, beam quality and average current of conventional systems. While many efforts have focused on improving acceleration stability and quality, little progress has been made in increasing the beam's average current, which is essential for future laser-plasma-based applications. In this paper, we investigate a laser-plasma acceleration regime aimed at increasing the beam average current with energies up to few-MeVs, efficiently enhancing the beam charge. We present experimental results on configurations that allow reaching charges of $5-30\,$nC and a maximum conversion efficiency of around $14\,$%. Through comprehensive Particle-In-Cell simulations, we interpret the experimental results and present a detailed study on electron dynamics. From our analysis, we show that most electrons are not trapped in a plasma wave; rather, they experience ponderomotive acceleration. Thus, we prove the laser pulse as the main driver of the particles' energy gain process.
△ Less
Submitted 1 August, 2024;
originally announced August 2024.
-
Carrier-envelope phase controlled dynamics of relativistic electron beams in a laser-wakefield accelerator
Authors:
Lucas Rovige,
Joséphine Monzac,
Julius Huijts,
Igor A. Andriyash,
Aline Vernier,
Jaismeen Kaur,
Marie Ouillé,
Zhao Cheng,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Račiukaits,
Juozas Dudutis,
Valdemar Stankevič,
Paulius Gečys,
Rodrigo Lopez-Martens,
Jérôme Faure
Abstract:
In laser-wakefield acceleration, an ultra-intense laser pulse is focused into an underdense plasma in order to accelerate electrons to relativistic velocities. In most cases, the pulses consist of multiple optical cycles and the interaction is well described in the framework of the ponderomotive force where only the envelope of the laser has to be considered. But when using single-cycle pulses, th…
▽ More
In laser-wakefield acceleration, an ultra-intense laser pulse is focused into an underdense plasma in order to accelerate electrons to relativistic velocities. In most cases, the pulses consist of multiple optical cycles and the interaction is well described in the framework of the ponderomotive force where only the envelope of the laser has to be considered. But when using single-cycle pulses, the ponderomotive approximation breaks down, and the actual waveform of the laser has to be taken into account. In this paper, we use near-single cycle laser pulses to drive a laser-wakefield accelerator. We observe variations of the electron beam pointing on the order of 10 mrad in the polarisation direction, as well as 30% variations of the beam charge, locked to the value of the controlled laser carrier-envelope phase, in both nitrogen and helium plasma. Those findings are explained through particle-in-cell simulations indicating that low-emittance, ultra-short electron bunches are periodically injected off-axis by the transversally oscillating bubble associated with the slipping carrier-envelope phase.
△ Less
Submitted 7 October, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Symmetric and asymmetric shocked gas jets for laser-plasma experiments
Authors:
Lucas Rovige,
Julius Huijts,
Aline Vernier,
Igor Andriyash,
François Sylla,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Raciukaitis,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gecys,
Jerome Faure
Abstract:
Shocks in supersonic flows offer both a high-density and sharp density gradients that can be used, for instance,for gradient injection in laser-plasma accelerators. We report on a parametric study of oblique shocks created by inserting a straight axisymmetric section at the end of a supersonic "de Laval" nozzle. The impact of different parameters such as throat diameter and straight section length…
▽ More
Shocks in supersonic flows offer both a high-density and sharp density gradients that can be used, for instance,for gradient injection in laser-plasma accelerators. We report on a parametric study of oblique shocks created by inserting a straight axisymmetric section at the end of a supersonic "de Laval" nozzle. The impact of different parameters such as throat diameter and straight section length is studied through computational fluid dynamics (CFD) simulations. Experimental characterizations of a shocked nozzle are compared to CFD simulations and found to be in good agreement. We then introduce a newly designed asymmetric shocked gas jet, where the straight section is only present on one lateral side of the nozzle, thus providing a gas profile that can be used for density transition injection. In this case, full-3D fluid simulations and experimental measurements are compared and show excellent agreement.
△ Less
Submitted 23 March, 2021;
originally announced March 2021.
-
Influence of nonlinear- and saturable-absorption on laser lift-off threshold of oxide/metal structure
Authors:
Andrius Žemaitis,
Mantas Gaidys,
Paulius Gečys,
Mindaugas Gedvilas
Abstract:
In this work, a new model of effective lift-off threshold of oxide/metal target is presented. The influence of nonlinear processes in the oxide layer on its removal from the metallic samples using picosecond laser was investigated. Nonlinear and saturable absorption in the layer was incorporated into modeling for prediction of effective laser lift-off threshold fluence change with varying peak int…
▽ More
In this work, a new model of effective lift-off threshold of oxide/metal target is presented. The influence of nonlinear processes in the oxide layer on its removal from the metallic samples using picosecond laser was investigated. Nonlinear and saturable absorption in the layer was incorporated into modeling for prediction of effective laser lift-off threshold fluence change with varying peak intensities in z-scan type experiment for the first time. The new model coincides well with the experimental results.
△ Less
Submitted 30 March, 2021; v1 submitted 20 March, 2021;
originally announced March 2021.
-
Functional surface formation by efficient laser ablation using single-pulse and burst-modes
Authors:
Andrius Žemaitis,
Mantas Gaidys,
Justinas Mikšys,
Paulius Gečys,
Mindaugas Gedvilas
Abstract:
Surfaces inspired by nature and their replication find great interest in science, technology, and medicine due to their unique functional properties. This research aimed to develop an efficient laser milling technology using single-pulse- and burst-modes of irradiation to replicate bio-inspired structures over large areas at high speed. The ability to form the trapezoidal-riblets inspired by shark…
▽ More
Surfaces inspired by nature and their replication find great interest in science, technology, and medicine due to their unique functional properties. This research aimed to develop an efficient laser milling technology using single-pulse- and burst-modes of irradiation to replicate bio-inspired structures over large areas at high speed. The ability to form the trapezoidal-riblets inspired by shark skin at high production speeds while maintaining the lowest possible surface roughness was demonstrated.
△ Less
Submitted 14 February, 2021;
originally announced March 2021.
-
Optimization and stabilization of a kilohertz laser-plasma accelerator
Authors:
L. Rovige,
J. Huijts,
I. A. Andriyash,
A. Vernier,
M. Ouillé,
Z. Cheng,
T. Asai,
Y. Fukuda,
V. Tomkus,
V. Girdauskas,
G. Raciukaitis,
J. Dudutis,
V. Stankevic,
P. Gecys,
R. Lopez-Martens,
J. Faure
Abstract:
Laser plasma acceleration at kilohertz repetition rate has recently been shown to work in two different regimes, with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two LPA processes can be distinguished, where beams of th…
▽ More
Laser plasma acceleration at kilohertz repetition rate has recently been shown to work in two different regimes, with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and plasma densities were investigated through continuous tuning of the laser spectral bandwidth. Indeed, two LPA processes can be distinguished, where beams of the highest quality, with 5.4 pC charge and a spectrum peaked at 2-2.5 MeV are obtained with short pulses propagating in moderate plasma densities. Through Particle-in-Cell simulations the two different acceleration processes are thoroughly explained. Finally, we proceed to show the results of a 5-hour continuous and stable run of our LPA accelerator accumulating more than $\mathrm{18\times10^6}$ consecutive shots, with 2.6 pC charge and peaked 2.5 MeV spectrum. A parametric study of the influence of the laser driver energy through PIC simulations underlines that this unprecedented stability was obtained thanks to micro-scale density gradient injection. Together, these results represent an important step towards stable laser-plasma accelerated electron beams at kilohertz repetition rate.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Novel ultrafast laser ablation by bibursts in the MHz and GHz pulse repetition rates
Authors:
Andrius Žemaitis,
Mantas Gaidys,
Paulius Gečys,
Martynas Barkauskas,
Mindaugas Gedvilas
Abstract:
Here, to the best of our knowledge, for the first time we report the in-depth experimental study of high ultrafast laser ablation efficiency for processing of copper and steel with single-pulses, MHz-, GHz- and burst in the burst (biburst) regime. The comparison of burst, biburst, and single-pulse ablation efficiencies was performed for beam-size-optimised regimes, showing the real advantages and…
▽ More
Here, to the best of our knowledge, for the first time we report the in-depth experimental study of high ultrafast laser ablation efficiency for processing of copper and steel with single-pulses, MHz-, GHz- and burst in the burst (biburst) regime. The comparison of burst, biburst, and single-pulse ablation efficiencies was performed for beam-size-optimised regimes, showing the real advantages and disadvantages of milling and drilling processing approaches. Highly-efficient ultrashort pulse laser processing was achieved for ~1 um optical wavelength: 8.8 um3/uJ for copper drilling, 5.6 um3/uJ for copper milling, and 6.9 um3/uJ for steel milling. We believe that the huge experimental data collected in this study will serve well for the better understanding of laser burst-matter interaction and theoretical modelling.
△ Less
Submitted 17 February, 2021; v1 submitted 23 October, 2020;
originally announced November 2020.
-
Demonstration of stable long-term operation of a kilohertz laser-plasma accelerator
Authors:
Lucas Rovige,
Julius Huijts,
Aline Vernier,
Vidmantas Tomkus,
Valdas Girdauskas,
Gediminas Raciukaitis,
Juozas Dudutis,
Valdemar Stankevic,
Paulius Gecys,
Marie Ouillé,
Zhao Cheng,
Rodrigo Lopez-Martens,
Jérôme Faure
Abstract:
We report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a newly designed asymmetrically shocked gas nozzle. The reproducibility of the electron source was also assessed over a period of a w…
▽ More
We report on the stable and continuous operation of a kilohertz laser-plasma accelerator. Electron bunches with 2.6 pC charge and 2.5 MeV peak energy were generated via injection and trapping in a downward plasma density ramp. This density transition was produced in a newly designed asymmetrically shocked gas nozzle. The reproducibility of the electron source was also assessed over a period of a week and found to be satisfactory with similar values of the beam charge and energy. These results show that the reproducibility and stability of the laser-plasma accelerator are greatly enhanced on the long-term scale when using a robust scheme for density gradient injection.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Direct and High-Throughput Fabrication of Mie-Resonant Metasurfaces via Single-Pulse Laser Interference
Authors:
Jonas Berzinš,
Simonas Indrišiūnas,
Koen van Erve,
Arvind Nagarajan,
Stefan Fasold,
Michael Steinert,
Giampiero Gerini,
Paulius Gečys,
Thomas Pertsch,
Stefan M. B. Bäumer,
Frank Setzpfandt
Abstract:
High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silico…
▽ More
High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silicon film into an array of Mie resonators. The proposed technique is based on laser-interference-induced dewetting. A precise control of the laser pulse energy enables the fabrication of ordered dielectric metasurfaces in areas spanning tens of micrometers and consisting of thousands of hemispherical nanoparticles with a single laser shot. The fabricated nanoparticles exhibit a wavelength-dependent optical response with a strong electric dipole signature. Variation of the pre-deposited silicon film thickness allows tailoring of the resonances in the targeted visible and infrared spectral ranges. Such direct and high-throughput fabrication paves the way towards a simple realization of spatially invariant metasurface-based devices.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Laser-Induced Spatially-Selective Tailoring of High-Index Dielectric Metasurfaces
Authors:
Jonas Berzinš,
Simonas Indrišiūnas,
Stefan Fasold,
Michael Steinert,
Olga Žukovskaja,
Dana Cialla-May,
Paulius Gečys,
Stefan M. B. Bäumer,
Thomas Pertsch,
Frank Setzpfandt
Abstract:
Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effe…
▽ More
Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effects: crystallization and reshaping, while the heat is localized by a high-precision positioning of the focused laser beam. Moreover, for the first time, the resonant behavior of dielectric metasurface elements is exploited to engineer a specific absorption profile, which leads to a spatially-selective heating and a customized modification. Such technique has a potential to reduce the complexity in the fabrication of non-uniform metasurface-based optical elements. Two distinct cases, a spatial pixelation of a large-scale metasurface and a height modification of metasurface elements, are explicitly demonstrated.
△ Less
Submitted 11 October, 2019; v1 submitted 11 July, 2019;
originally announced July 2019.
