-
Optical frequency comb Fourier transform spectroscopy of formaldehyde in the 1250 to 1390 cm$^{-1}$ range: experimental line list and improved MARVEL analysis
Authors:
Matthias Germann,
Adrian Hjältén,
Jonathan Tennyson,
Sergei N. Yurchenko,
Iouli E. Gordon,
Christian Pett,
Isak Silander,
Karol Krzempek,
Arkadiusz Hudzikowski,
Aleksander Głuszek,
Grzegorz Soboń,
Aleksandra Foltynowicz
Abstract:
We use optical frequency comb Fourier transform spectroscopy to record high-resolution, low-pressure, room-temperature spectra of formaldehyde (H$_2$$^{12}$C$^{16}$O) in the range of 1250 to 1390 cm$^{-1}$. Through line-by-line fitting, we retrieve line positions and intensities of 747 rovibrational transitions: 558 from the $ν_6$ band, 129 from the $ν_4$ band, and 14 from the $ν_3$ band, as well…
▽ More
We use optical frequency comb Fourier transform spectroscopy to record high-resolution, low-pressure, room-temperature spectra of formaldehyde (H$_2$$^{12}$C$^{16}$O) in the range of 1250 to 1390 cm$^{-1}$. Through line-by-line fitting, we retrieve line positions and intensities of 747 rovibrational transitions: 558 from the $ν_6$ band, 129 from the $ν_4$ band, and 14 from the $ν_3$ band, as well as 46 from four different hot bands. We incorporate the accurate and precise line positions (0.4 MHz median uncertainty) into the MARVEL (measured active vibration-rotation energy levels) analysis of the H$_2$CO spectrum. This increases the number of MARVEL-predicted energy levels by 82 and of rovibrational transitions by 5382, and substantially reduces uncertainties of MARVEL-derived H$_2$CO energy levels over a large range: from pure rotational levels below 200 cm$^{-1}$ up to multiply excited vibrational levels at 6000 cm$^{-1}$. This work is an important step toward filling the gaps in formaldehyde data in the HITRAN database.
△ Less
Submitted 5 October, 2023; v1 submitted 21 June, 2023;
originally announced June 2023.
-
A methane line list with sub-MHz accuracy in the 1250 to 1380 cm-1 range from optical frequency comb Fourier transform spectroscopy
Authors:
Matthias Germann,
Adrian Hjältén,
Vincent Boudon,
Cyril Richard,
Karol Krzempek,
Arkadiusz Hudzikowski,
Aleksander Głuszek,
Grzegorz Soboń,
Aleksandra Foltynowicz
Abstract:
We use a Fourier transform spectrometer based on a difference frequency generation optical frequency comb to measure high-resolution, low-pressure, room-temperature spectra of methane in the 1250 - 1380 cm$^{-1}$ range. From these spectra, we retrieve line positions and intensities of 678 lines of two isotopologues: 157 lines from the $^{12}$CH${_4}$ $ν$${_4}$ fundamental band, 131 lines from the…
▽ More
We use a Fourier transform spectrometer based on a difference frequency generation optical frequency comb to measure high-resolution, low-pressure, room-temperature spectra of methane in the 1250 - 1380 cm$^{-1}$ range. From these spectra, we retrieve line positions and intensities of 678 lines of two isotopologues: 157 lines from the $^{12}$CH${_4}$ $ν$${_4}$ fundamental band, 131 lines from the $^{13}$CH${_4}$ $ν$${_4}$ fundamental band, as well as 390 lines from two $^{12}$CH${_4}$ hot bands, $ν$${_2}$ + $ν$${_4}$ - $ν$${_2}$ and 2$ν$${_4}$ - $ν$${_4}$. For another 165 lines from the $^{12}$CH${_4}$ $ν$${_4}$ fundamental band we retrieve line positions only. The uncertainties of the line positions range from 0.19 to 2.3 MHz, and their median value is reduced by a factor of 18 and 59 compared to the previously available data for the $^{12}$CH${_4}$ fundamental and hot bands, respectively, obtained from conventional FTIR absorption measurements. The new line positions are included in the global models of the spectrum of both methane isotopologues, and the fit residuals are reduced by a factor of 8 compared to previous absorption data, and 20 compared to emission data. The experimental line intensities have relative uncertainties in the range of 1.5 - 7.7%, similar to those in the previously available data; 235 new $^{12}$CH${_4}$ line intensities are included in the global model.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Optical Frequency Comb Fourier Transform Spectroscopy of $^{14}$N$_2$$^{16}$O at 7.8 μm
Authors:
Adrian Hjältén,
Matthias Germann,
Karol Krzempek,
Arkadiusz Hudzikowski,
Aleksander Głuszek,
Dorota Tomaszewska,
Grzegorz Soboń,
Aleksandra Foltynowicz
Abstract:
We use a Fourier transform spectrometer based on a compact mid-infrared difference frequency generation comb source to perform broadband high-resolution measurements of nitrous oxide, $^{14}$N$_2$$^{16}$O, and retrieve line center frequencies of the $ν$$_1$ fundamental band and the $ν$$_1$ + $ν$$_2$ - $ν$$_2$ hot band. The spectrum spans 90 cm$^{-1}$ around 1285 cm$^{-1}$ with a sample point spaci…
▽ More
We use a Fourier transform spectrometer based on a compact mid-infrared difference frequency generation comb source to perform broadband high-resolution measurements of nitrous oxide, $^{14}$N$_2$$^{16}$O, and retrieve line center frequencies of the $ν$$_1$ fundamental band and the $ν$$_1$ + $ν$$_2$ - $ν$$_2$ hot band. The spectrum spans 90 cm$^{-1}$ around 1285 cm$^{-1}$ with a sample point spacing of 3 ${\times}$ 10$^{-4}$ cm$^{-1}$ (9 MHz). We report line positions of 72 lines in the $ν$$_1$ fundamental band between P(37) and R(38), and 112 lines in the $ν$$_1$ + $ν$$_2$ - $ν$$_2$ hot band (split into two components with e/f rotationless parity) between P(34) and R(33), with uncertainties in the range of 90-600 kHz. We derive upper state constants of both bands from a fit of the effective ro-vibrational Hamiltonian to the line center positions. For the fundamental band, we observe excellent agreement in the retrieved line positions and upper state constants with those reported in a recent study by AlSaif et al. using a comb-referenced quantum cascade laser [J Quant Spectrosc Radiat Transf, 2018;211:172-178]. We determine the origin of the hot band with precision one order of magnitude better than previous work based on FTIR measurements by Toth [http://mark4sun.jpl.nasa.gov/n2o.html], which is the source of the HITRAN2016 data for these bands.
△ Less
Submitted 4 May, 2021; v1 submitted 5 March, 2021;
originally announced March 2021.
-
Frequency-doubled femtosecond Er-doped fiber laser for two-photon excited fluorescence imaging
Authors:
Dorota Stachowiak,
Jakub Bogusławski,
Aleksander Głuszek,
Zbigniew Łaszczych,
Maciej Wojtkowski,
Grzegorz Soboń
Abstract:
A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker u…
▽ More
A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker unit built-in within the amplifier chain, directly providing transform-limited pulses for any chosen repetition rate between 1 and 12 MHz. We employed the laser source to drive a scanning two-photon excited fluorescence microscope for ex vivo rat skin and other samples imaging at various pulse repetition rates. Due to compactness, ease of operation, and suitable pulse characteristics the laser source can be considered as an attractive alternative for Ti:sapphire laser in biomedical imaging.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Compact mode-locked Er-doped fiber laser for broadband cavity-enhanced spectroscopy
Authors:
Aleksander Głuszek,
Francisco Senna Vieira,
Arkadiusz Hudzikowski,
Adam Wąż,
Jarosław Sotor,
Aleksandra Foltynowicz,
Grzegorz Soboń
Abstract:
We report the design and characteristics of a simple and compact mode-locked Er-doped fiber laser and its application to broadband cavity-enhanced spectroscopy. The graphene mode-locked polarization maintaining oscillator is thermally stabilized and equipped with three actuators that control the repetition rate: fast and slow fiber stretchers, and metal-coated fiber section. This allows wide tunin…
▽ More
We report the design and characteristics of a simple and compact mode-locked Er-doped fiber laser and its application to broadband cavity-enhanced spectroscopy. The graphene mode-locked polarization maintaining oscillator is thermally stabilized and equipped with three actuators that control the repetition rate: fast and slow fiber stretchers, and metal-coated fiber section. This allows wide tuning of the repetition rate and its stabilization to an external reference source. The applicability of the laser to molecular spectroscopy is demonstrated by detecting CO2 in air using continuous-filtering Vernier spectroscopy.
△ Less
Submitted 28 April, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
