-
Molecular adsorption induces normal stresses at frictional interfaces of hydrogels
Authors:
Lola Ciapa,
Yvette Tran,
Christian Frétigny,
Antoine Chateauminois,
Emilie Verneuil
Abstract:
Friction experiments were conducted on hydrogel thin films sliding against a rigid sphere in a low velocity regime where molecular adsorption at the sliding interface sets the friction force, through a dissipative adsorption-stretching-desorption mechanism initially postulated by Schallamach. By carefully imaging the contact from the initial indentation step of the sphere into the hydrogel to stea…
▽ More
Friction experiments were conducted on hydrogel thin films sliding against a rigid sphere in a low velocity regime where molecular adsorption at the sliding interface sets the friction force, through a dissipative adsorption-stretching-desorption mechanism initially postulated by Schallamach. By carefully imaging the contact from the initial indentation step of the sphere into the hydrogel to steady state sliding, we evidence for the first time that this very same adsorption mechanism also results in a normal force pulling the sphere further into the hydrogel. Observations of this tangential-normal coupling is made on a variety of chemically modified silica spheres, over 3 decades in velocity and at varied normal load, thereby demonstrating its robustness. Quantitative measurements of the extra normal force and of the friction-velocity relationship versus normal load are well rationalized within a theoretical model based on the thermal actuation of molecular bonds. To do so, we account for the finite non-zero thickness of the sliding interface at which molecular adsorption and stretching events produce an out-of-plane force responsible for both friction and normal pull-in.
△ Less
Submitted 9 December, 2024;
originally announced December 2024.
-
Friction through molecular adsorption at the sliding interface of hydrogels: Theory and experiments
Authors:
Lola Ciapa,
Ludovic Olanier,
Yvette Tran,
Christian Frétigny,
Antoine Chateauminois,
Emilie Verneuil
Abstract:
We report on the frictional properties of thin ($\approx μm$) poly(dimethylacrylamide) hydrogel films within contacts with spherical silica probes. In order to focus on the contribution to friction of interfacial dissipation, a dedicated rotational setup is designed which allows to suppress poroelastic flows while ensuring an uniform velocity field at the sliding interface. The physical-chemistry…
▽ More
We report on the frictional properties of thin ($\approx μm$) poly(dimethylacrylamide) hydrogel films within contacts with spherical silica probes. In order to focus on the contribution to friction of interfacial dissipation, a dedicated rotational setup is designed which allows to suppress poroelastic flows while ensuring an uniform velocity field at the sliding interface. The physical-chemistry of the interface is varied from the grafting of various silanes on the silica probes. Remarkably, we identify a velocity range in which the average frictional stress systematically varies with the logarithm of the sliding velocity. This dependency is found to be sensitive to the physical-chemistry of the silica surfaces. Experimental observations are discussed in the light of a molecular model where friction arises from thermally activated adsorption of polymer chains at the sliding interface, their elastic stretching and subsequent desorption. From this theoretical description, our experimental data provide us with adhesion energies and characteristic times for molecular adsorption that are found consistent with the physico-chemistry of the chemically-modified silica surfaces.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Probing interfacial effects with thermocapillary flows
Authors:
M. Maza-Cuello,
C. Frétigny,
L. Talini
Abstract:
We report on the thinning of supported liquid films driven by thermocapillarity. The liquids are oil films, of initial thicknesses of a few tens of microns. A local and moderate heating of the glass substrate on which they are spread on induces a thermocapillary flow, which allows the formation of ultra-thin films. We show that, within a given time range, the thinning dynamics of submicron thick f…
▽ More
We report on the thinning of supported liquid films driven by thermocapillarity. The liquids are oil films, of initial thicknesses of a few tens of microns. A local and moderate heating of the glass substrate on which they are spread on induces a thermocapillary flow, which allows the formation of ultra-thin films. We show that, within a given time range, the thinning dynamics of submicron thick films is governed by the thermocapillary stress. It results in a simple dependency of the thickness profiles with time, which is evidenced by the collapse of the data onto a master curve. The master curve only depends on the liquid properties and on the thermal gradient, and allows a measurement of the latter. As the films further thin down to thicknesses within the range of molecular interactions, a deviation from the master curve appears. Although all investigated oils are supposedly fully wetting glass, the nature of the deviation differs between alkanes and silicone oils. We attribute the observed behaviors to differing signs of disjoining pressures, and this picture is confirmed by numerical resolution of the thin-film equation. We suggest thermocapillary flows can be used to finely probe molecular interactions.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Memory effects in friction: the role of sliding heterogeneities
Authors:
vincenzo Fazio,
Vito Acito,
Fabien Amiot,
Christian Frétigny,
Antoine Chateauminois
Abstract:
We report on memory effects involved in the transient frictional response of a contact interface between a silicone rubber and a spherical glass probe when it is perturbed by changes in the orientation of the driving motion or by velocity steps. From measurements of the displacement fields at the interface, we show that observed memory effects can be accounted for by the non-uniform distribution o…
▽ More
We report on memory effects involved in the transient frictional response of a contact interface between a silicone rubber and a spherical glass probe when it is perturbed by changes in the orientation of the driving motion or by velocity steps. From measurements of the displacement fields at the interface, we show that observed memory effects can be accounted for by the non-uniform distribution of the sliding velocity within the contact interface. As a consequence of these memory effects, the friction force may no longer be aligned with respect to the sliding trajectory. In addition, stick-slip motions with a purely geometrical origin are also evidenced. These observations are adequately accounted for by a friction model which takes into account heterogeneous displacements within the contact area. When a velocity dependence of the frictional stress is incorporated in this the model, transient regimes induced by velocity steps are also adequately described. The good agreement between the model and experiments outlines the role of space heterogeneities in memory effects involved in soft matter friction.
△ Less
Submitted 26 November, 2021; v1 submitted 12 July, 2021;
originally announced July 2021.
-
Modification of the fluctuation dynamics of ultra-thin wetting films
Authors:
C. Clavaud,
M. Maza-Cuello,
C. Frétigny,
L. Talini,
T. Bickel
Abstract:
We report on the effect of intermolecular forces on the fluctuations of supported liquid films. Using an optically-induced thermal gradient, we form nanometer-thin films of wetting liquids on glass substrates, where van der Waals forces are balanced by thermocapillary forces. We show that the fluctuation dynamics of the film interface is strongly modified by intermolecular forces at lower frequenc…
▽ More
We report on the effect of intermolecular forces on the fluctuations of supported liquid films. Using an optically-induced thermal gradient, we form nanometer-thin films of wetting liquids on glass substrates, where van der Waals forces are balanced by thermocapillary forces. We show that the fluctuation dynamics of the film interface is strongly modified by intermolecular forces at lower frequencies. Data spanning three frequency decades are in excellent agreement with theoretical predictions accounting for van der Waals forces. Our results emphasize the relevance of intermolecular forces on thermal fluctuations when fluids are confined at the nanoscale.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Preferential Root Tropism Induced by Structural Inhomogeneities in 2D Wet Granular Media
Authors:
Cesare M. Cejas,
Lawrence A. Hough,
Raphaël Beaufret,
Jean-Christophe Castaing,
Christian Frétigny,
Rémi Dreyfus
Abstract:
We investigate certain aspects of the physical mechanisms of root growth in a granular medium and how these roots adapt to changes in water distribution induced by the presence of structural inhomogeneities in the form of solid intrusions. Physical intrusions such as a square rod added into the 2D granular medium modify water distribution by maintaining robust capillary action, pumping water from…
▽ More
We investigate certain aspects of the physical mechanisms of root growth in a granular medium and how these roots adapt to changes in water distribution induced by the presence of structural inhomogeneities in the form of solid intrusions. Physical intrusions such as a square rod added into the 2D granular medium modify water distribution by maintaining robust capillary action, pumping water from the more saturated areas at the bottom of the cell towards the less saturated areas near the top of the cell while the rest of the medium is slowly devoid of water via evaporation. This water redistribution induces `preferential tropism' of roots, guiding the roots and permitting them to grow deeper into more saturated regions in the soil. This further allows more efficient access to available water in the deeper sections of the medium thereby resulting to increased plant lifetime
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Straightforward measurement of thermal properties of anisotropic materials: the case of Bi2Se3 single crystal
Authors:
Danièle Fournier,
Massimiliano Marangolo,
Mahmoud Eddrief,
Nikolai Kolesnikov,
Christian Fretigny
Abstract:
We show that by a simple two-steps measurement protocol one can extract the thermal properties of anisotropic insulator materials. We focus on Bi2Se3 single crystal, a layered crystal with individual sheets held together by Van der Waals force, presenting strong heat diffusion anisotropy. Since the shape of the sample does not allow experiments in the perpendicular direction the challenge is to me…
▽ More
We show that by a simple two-steps measurement protocol one can extract the thermal properties of anisotropic insulator materials. We focus on Bi2Se3 single crystal, a layered crystal with individual sheets held together by Van der Waals force, presenting strong heat diffusion anisotropy. Since the shape of the sample does not allow experiments in the perpendicular direction the challenge is to measure the in plane and out of plane thermal properties by in plane measurements. The optical properties of Bi2Se3 being known (opaque sample for the pump and probe beams), thermoreflectance microscopy experiments can be done on the bare substrate. In this case, the lateral heat diffusion is governed by the in plane thermal diffusivity. A 100 nm gold layer is then deposited on the sample. In this second experiment it is straightforward to demonstrate that the perpendicular thermal properties of the layer rule the lateral diffusivity. The good agreement of theoretical curves obtained by thermal models with experimental data permit us to evaluate the thermal conductivity coefficients of bulk Bi2Se3.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Experimental investigation of water distribution in two-phase zone during gravity-dominated evaporation
Authors:
C. Cejas,
J. -C. Castaing,
L. A. Hough,
C. Fretigny,
R. Dreyfus
Abstract:
We characterize the water repartition within the partially saturated (two-phase) zone (PSZ) during evaporation out of mixed wettable porous media by controlling the wettability of glass beads, their sizes, and as well the surrounding relative humidity. Here, Capillary numbers are low and under these conditions, the percolating front is stabilized by gravity. Using experimental and numerical analys…
▽ More
We characterize the water repartition within the partially saturated (two-phase) zone (PSZ) during evaporation out of mixed wettable porous media by controlling the wettability of glass beads, their sizes, and as well the surrounding relative humidity. Here, Capillary numbers are low and under these conditions, the percolating front is stabilized by gravity. Using experimental and numerical analyses, we find that the PSZ saturation decreases with the Bond number, where packing of smaller particles have higher saturation values than packing made of larger particles. Results also reveal that the extent (height) of the PSZ, as well as water saturation in the PSZ, both increase with wettability. We also numerically calculate the saturation exclusively contained in connected liquid films and results show that values are less than the expected PSZ saturation. These results strongly reflect that the two-phase zone is not solely made up of connected capillary networks, but also made of disconnected water clusters or pockets. Moreover, we also find that global saturation (PSZ + full wet zone) decreases with wettability, confirming that greater quantity of water is lost via evaporation with increasing hydrophilicity. These results show that connected liquid films are favored in more hydrophilic systems while disconnected water pockets are favored in less hydrophilic systems.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Effects of stretching on the frictional stress of rubber
Authors:
Antoine Chateauminois,
Danh-Toan Nguyen,
Christian Frétigny
Abstract:
In this paper, we report on new experimental results on the effects of in-plane surface stretching on the friction of Poly(DiMethylSiloxane) (PDMS) rubber with smooth rigid probes. Friction-induced displacement fields are measured at the surface of the PDMS substrate under steady-state sliding. Then, the corresponding contact pressure and frictional stress distributions are determined from an inve…
▽ More
In this paper, we report on new experimental results on the effects of in-plane surface stretching on the friction of Poly(DiMethylSiloxane) (PDMS) rubber with smooth rigid probes. Friction-induced displacement fields are measured at the surface of the PDMS substrate under steady-state sliding. Then, the corresponding contact pressure and frictional stress distributions are determined from an inversion procedure. Using this approach, we show that the local frictional stress $τ$ is proportional to the local stretch ratio $λ$ at the rubber surface. Additional data using a triangular flat punch indicate that $τ(λ)$ relationship is independent on the contact geometry. From friction experiments using pre-stretched PDMS substrate, it is also found that the stretch-dependence of the frictional stress is isotropic, i.e. it does not depend on the angle between stretching and sliding directions. Potential physical explanations for this phenomenon are provided within the framework of Schallamach's friction model. Although the present experiments are dealing with smooth contact interfaces, the reported $τ(λ)$ dependence is also relevant to the friction of statistically rough contact interfaces, while not accounted for in related contact mechanics models.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Contact of a spherical probe with a stretched rubber substrate
Authors:
Christian Fretigny,
Antoine Chateauminois
Abstract:
We report on a theoretical and experimental investigation of the normal contact of stretched neo-Hookean substrates with rigid spherical probes. Starting from a published formulation of surface Green's function for incremental displacements on a pre-stretched, neo-Hookean, substrate (L.H. Lee \textit{J. Mech. Phys. Sol.} \textbf{56} (2008) 2957-2971), a model is derived for both adhesive and non-a…
▽ More
We report on a theoretical and experimental investigation of the normal contact of stretched neo-Hookean substrates with rigid spherical probes. Starting from a published formulation of surface Green's function for incremental displacements on a pre-stretched, neo-Hookean, substrate (L.H. Lee \textit{J. Mech. Phys. Sol.} \textbf{56} (2008) 2957-2971), a model is derived for both adhesive and non-adhesive contacts. The shape of the elliptical contact area together with the contact load and the contact stiffness are predicted as a function of the in-plane stretch ratios $λ_x$ and $λ_y$ of the substrate. The validity of this model is assessed by contact experiments carried out using an uniaxally stretched silicone rubber. for stretch ratio below about 1.25, a good agreement is observed between theory and experiments. Above this threshold, some deviations from the theoretical prediction are induced as a result of the departure of the mechanical response of the silicone rubber from the neo-Hokeean description embedded in the model.
△ Less
Submitted 20 March, 2017;
originally announced March 2017.
-
Multiscale Surface-Attached Hydrogel Thin Films with Tailored Architecture
Authors:
Benjamin Chollet,
Mengxing Li,
Ekkachai Martwong,
Bruno Bresson,
Christian Frétigny,
Patrick Tabeling,
Yvette Tran
Abstract:
A facile route for the fabrication of surface-attached hydrogel thin films with well-controlled chemistry and tailored architecture on wide range of thickness from nanometers to micrometers is reported. The synthesis, which consists in cross-linking and grafting the preformed and ene-reactive polymer chains through thiol--ene click chemistry, has the main advantage of being well-controlled withou…
▽ More
A facile route for the fabrication of surface-attached hydrogel thin films with well-controlled chemistry and tailored architecture on wide range of thickness from nanometers to micrometers is reported. The synthesis, which consists in cross-linking and grafting the preformed and ene-reactive polymer chains through thiol--ene click chemistry, has the main advantage of being well-controlled without the addition of initiators. As thiol--ene click reaction can be selectively activated by UV-irradiation (in addition to thermal heating), micropatterned hydrogel films are easily synthesized. The versatility of our approach is illustrated by the possibility to fabricate various chemical polymer networks, like stimuli-responsive hydrogels, on various solid substrates, such as silicon wafers, glass, and gold surfaces. Another attractive feature is the development of new complex hydrogel films with targeted architecture. The fabrication of various architectures for polymer films is demonstrated: multilayer hydrogel films in which single-networks are stacked one onto the other, interpenetrating networks films with mixture of two networks in the same layer, and nanocomposite hydrogel films where nanoparticles are stably trapped inside the mesh of the network. Thanks to its simplicity and its versatility this novel approach to surface-attached hydrogel films should have a strong impact in the area of polymer coatings
△ Less
Submitted 2 February, 2017;
originally announced February 2017.
-
Friction of rubber with surfaces patterned with rigid spherical asperities
Authors:
D. T. Nguyen,
S. Ramakrishna,
C. Fretigny,
N. D. Spencer,
Y. Le Chenadec,
A. Chateauminois
Abstract:
This paper reports on the frictional properties of smooth rubber substrates sliding against rigid surfaces covered with various densities of colloidal nano-particles (average diameter 77 nm). Friction experiments were carried out using a transparent Poly(dimethyl siloxane) (PDMS) rubber contacting a silica lens with silica nano-particles sintered onto its surface. Using a previously described meth…
▽ More
This paper reports on the frictional properties of smooth rubber substrates sliding against rigid surfaces covered with various densities of colloidal nano-particles (average diameter 77 nm). Friction experiments were carried out using a transparent Poly(dimethyl siloxane) (PDMS) rubber contacting a silica lens with silica nano-particles sintered onto its surface. Using a previously described methodology (Nguyen \textit{et al.}, \textit{J. of Adhesion} \textbf{87} (2011) 235-250 ), surface shear stress and contact-pressure distribution within the contact were determined from a measurement of the displacement field at the surface of the PDMS elastomer. Addition of silica nano-particles results in a strong, pressure-independent enhancement of the frictional shear stress as compared to the smooth lens. The contribution of viscoelastic losses to these increased frictional properties is analyzed in the light of a numerical model that solves the contact problem between the rubber and the rough surface. An order-of-magnitude agreement is obtained between experimental and theoretical results, the latter showing that the calculation of viscoelastic dissipation within the contact is very sensitive to the details of the topography of the rigid asperities.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Friction of viscoelastic elastomers with rough surfaces under torsional contact conditions
Authors:
M. Trejo,
C. Frétigny,
A. Chateauminois
Abstract:
Frictional properties of contacts between a smooth viscoelastic rubber and rigid surfaces are investigated using a torsional contact configuration where a glass lens is continuously rotated on the rubber surface. From the inversion of the displacement field measured at the surface of the rubber, spatially resolved values of the steady state frictional shear stress are determined within the non hom…
▽ More
Frictional properties of contacts between a smooth viscoelastic rubber and rigid surfaces are investigated using a torsional contact configuration where a glass lens is continuously rotated on the rubber surface. From the inversion of the displacement field measured at the surface of the rubber, spatially resolved values of the steady state frictional shear stress are determined within the non homogeneous pressure and velocity fields of the contact. For contacts with a smooth lens, a velocity dependent but pressure independent local shear stress is retrieved from the inversion. On the other hand, the local shear stress is found to depend both on velocity and applied contact pressure when a randomly rough (sand blasted) glass lens is rubbed against the rubber surface. As a result of changes in the density of micro-asperity contacts, the amount of light transmitted by the transparent multi-contact interface is observed to vary locally as a function of both contact pressure and sliding velocity. Under the assumption that the intensity of light transmitted by the rough interface is proportional to the proportion of area into contact, it is found that the local frictional stress can be expressed experimentally as the product of a purely velocity dependent term, $k(v)$, by a term representing the pressure and velocity dependence of the actual contact area, $A/A_0$. A comparison between $k(v)$ and the frictional shear stress of smooth contacts suggests that nanometer scale dissipative processes occurring at the interface predominate over viscoelastic dissipation at micro-asperity scale.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Non-Amontons-Coulomb local friction law of randomly rough contact interfaces with rubber
Authors:
D. T. Nguyen,
E. Wandersman,
A. Prevost,
Y. Le Chenadec,
C. Fretigny,
A. Chateauminois
Abstract:
We report on measurements of the local friction law at a multi-contact interface formed between a smooth rubber and statistically rough glass lenses, under steady state friction. Using contact imaging, surface displacements are measured, and inverted to extract both distributions of frictional shear stress and contact pressure with a spatial resolution of about 10~$μ$m. For a glass surface whose t…
▽ More
We report on measurements of the local friction law at a multi-contact interface formed between a smooth rubber and statistically rough glass lenses, under steady state friction. Using contact imaging, surface displacements are measured, and inverted to extract both distributions of frictional shear stress and contact pressure with a spatial resolution of about 10~$μ$m. For a glass surface whose topography is self-affine with a Gaussian height asperity distribution, the local frictional shear stress is found to vary strongly sub-linearly with the local contact pressure over the whole investigated pressure range. Such sub-linear behavior is also evidenced for a surface with a non Gaussian height asperity distribution, demonstrating that, for such multi-contact interfaces, Amontons-Coulomb's friction law does not prevail at the local scale.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Surface pressure and shear stress field within a frictional contact on rubber
Authors:
D. T. Nguyen,
P. Paolino,
M-C. Audry,
A. Chateauminois,
C. Frétigny,
Y. Le Chenadec,
M. Portigliatti,
E. Barthel
Abstract:
This paper addresses the issue of the determination of the frictional stress distribution from the inversion of the measured surface displacement field for sliding interfaces between a glass lens and a rubber (poly(dimethylsiloxane)) substrate. Experimental results show that high lateral strains are achieved at the periphery of the sliding contacts. As a consequence, an accurate inversion of the d…
▽ More
This paper addresses the issue of the determination of the frictional stress distribution from the inversion of the measured surface displacement field for sliding interfaces between a glass lens and a rubber (poly(dimethylsiloxane)) substrate. Experimental results show that high lateral strains are achieved at the periphery of the sliding contacts. As a consequence, an accurate inversion of the displacement field requires that finite strains and non linear response of the rubber substrate are taken into account. For that purpose, a Finite Element (FE) inversion procedure is implemented where the measured displacement field is applied as a boundary condition at the upper surface of a meshed body representing the rubber substrate. Normal pressure is also determined by the same way, if non-diverging values are assumed at the contact edge. This procedure is applied to linearly sliding contacts as well as on twisting contacts.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Normal contact and friction of rubber with model randomly rough surfaces
Authors:
S. Yashima,
V. Romero,
E. Wandersman,
C. Frétigny,
M. K. Chaudhury,
A. Chateauminois,
A. M. Prevost
Abstract:
We report on normal contact and friction measurements of model multicontact interfaces formed between smooth surfaces and substrates textured with a statistical distribution of spherical micro-asperities. Contacts are either formed between a rigid textured lens and a smooth rubber, or a flat textured rubber and a smooth rigid lens. Measurements of the real area of contact $A$ versus normal load…
▽ More
We report on normal contact and friction measurements of model multicontact interfaces formed between smooth surfaces and substrates textured with a statistical distribution of spherical micro-asperities. Contacts are either formed between a rigid textured lens and a smooth rubber, or a flat textured rubber and a smooth rigid lens. Measurements of the real area of contact $A$ versus normal load $P$ are performed by imaging the light transmitted at the microcontacts. For both interfaces, $A(P)$ is found to be sub-linear with a power law behavior. Comparison to two multi-asperity contact models, which extend Greenwood-Williamson (J. Greenwood, J. Williamson, \textit{Proc. Royal Soc. London Ser. A} \textbf{295}, 300 (1966)) model by taking into account the elastic interaction between asperities at different length scales, is performed, and allows their validation for the first time. We find that long range elastic interactions arising from the curvature of the nominal surfaces are the main source of the non-linearity of $A(P)$. At a shorter range, and except for very low pressures, the pressure dependence of both density and area of micro-contacts remains well described by Greenwood-Williamson's model, which neglects any interaction between asperities. In addition, in steady sliding, friction measurements reveal that the mean shear stress at the scale of the asperities is systematically larger than that found for a macroscopic contact between a smooth lens and a rubber. This suggests that frictional stresses measured at macroscopic length scales may not be simply transposed to microscopic multicontact interfaces.
△ Less
Submitted 5 January, 2017;
originally announced January 2017.
-
Submicrometric Films of Surface-Attached Polymer Network with Temperature-Responsive Properties
Authors:
Mengxing Li,
Bruno Bresson,
F Cousin,
Christian Fretigny,
Yvette Tran
Abstract:
Temperature-responsive properties of surface-attached poly(N-isopropylacrylamide) (PNIPAM) network films with well-controlled chemistry are investigated. The synthesis consists of cross-linking and grafting preformed ene-reactive polymer chains through thiol--ene click chemistry. The formation of surface-attached and cross-linked polymer films has the advantage of being wellcontrolled without any…
▽ More
Temperature-responsive properties of surface-attached poly(N-isopropylacrylamide) (PNIPAM) network films with well-controlled chemistry are investigated. The synthesis consists of cross-linking and grafting preformed ene-reactive polymer chains through thiol--ene click chemistry. The formation of surface-attached and cross-linked polymer films has the advantage of being wellcontrolled without any caution of no-oxygen atmosphere or addition of initiators. PNIPAM hydrogel films with same cross-link density are synthesized on a wide range of thickness, from nanometers to micrometers. The swelling-collapse transition with temperature is studied by using ellipsometry, neutron reflectivity, and atomic force microscopy as complementary surface-probing techniques. Sharp and high amplitude temperature-induced phase transition is observed for all submicrometric PNIPAM hydrogel films. For temperature above LCST, surface-attached PNIPAM hydrogels collapse similarly but without complete expulsion of water. For temperature below LCST, the swelling of PNIPAM hydrogels depends on the film thickness. It is shown that the swelling is strongly affected by the surface attachment for ultrathin films below $\sim$150 nm. For thicker films above 150 nm (to micrometers), surface-attached polymer networks with the same cross-link density swell equally. The density profile of the hydrogel films in the direction normal to the substrate is confronted with in-plane topography of the free surface. It results that the free interface width is much larger than the roughness of the hydrogel film, suggesting pendant chains at the free surface.
△ Less
Submitted 12 April, 2016;
originally announced April 2016.
-
Effect of geometry on the dewetting of granular chains by evaporation
Authors:
Cesare M. Cejas,
Lawrence A. Hough,
Christian Frétigny,
Rémi Dreyfus
Abstract:
Understanding evaporation or drying in granular media still remains complex despite recent advancements. Evaporation depends on liquid transport across a connected film network from the bulk to the surface. In this study, we investigate the stability of film networks as a function of granular packing. Using a controlled experimental approach, we vary the granular packing geometry and show the chan…
▽ More
Understanding evaporation or drying in granular media still remains complex despite recent advancements. Evaporation depends on liquid transport across a connected film network from the bulk to the surface. In this study, we investigate the stability of film networks as a function of granular packing. Using a controlled experimental approach, we vary the granular packing geometry and show the changes in the height of the liquid film network during evaporation as packing shifts from a loose-packed to a close-packed arrangement. This height can be calculated from an equilibrium between hydrostatic pressure and the pressure difference between two points in the vertical film network. We use a simulation approach to calculate the pressure in both the percolating front and evaporating front within the two-phase zone of air/water mixture. Results show good agreement between the model and the experiment.
△ Less
Submitted 7 August, 2018; v1 submitted 18 January, 2016;
originally announced January 2016.
-
A Simple Analytical Model of Evaporation in the Presence of Roots
Authors:
Cesare M. Cejas,
Larry Hough,
Jean-Christophe Castaing,
Christian Fretigny,
Remi Dreyfus
Abstract:
Root systems can influence the dynamics of evapotranspiration of water out of a porous medium. The coupling of evapotranspiration remains a key aspect affecting overall root behavior. Predicting the evapotranspiration curve in the presence of roots helps keep track of the amount of water that remains in the porous medium. Using a controlled visual set-up of a 2D model soil system consisting of mon…
▽ More
Root systems can influence the dynamics of evapotranspiration of water out of a porous medium. The coupling of evapotranspiration remains a key aspect affecting overall root behavior. Predicting the evapotranspiration curve in the presence of roots helps keep track of the amount of water that remains in the porous medium. Using a controlled visual set-up of a 2D model soil system consisting of monodisperse glass beads, we first perform experiments on actual roots grown in partially saturated systems under different relative humidity conditions. We record parameters such as the total mass loss in the medium and the resulting position of the receding fronts and use these experimental results to develop a simple analytical model that predicts the position of the evaporating front as a function of time as well as the total amount of water that is lost from the medium due to the combined effects of evaporation and transpiration. The model is based on fundamental principles of evaporation flux and includes empirical assumptions on the quantity of stoma in the leaves and the transition time between regime 1 and regime 2. The model also underscores the importance of a much prolonged root life as long as the root is exposed to a partially saturated zone composed of a mixture of air and water. Comparison between the model and experimental results shows good prediction of the position of the evaporating front as well as the total mass loss from evapotranspiration in the presence of real root systems. These results provide additional understanding of both complex evaporation phenomenon and its influence on root mechanisms.
△ Less
Submitted 17 June, 2014;
originally announced June 2014.
-
Kinetics of Gravity-Driven Water Channels Under Steady Rainfall
Authors:
Cesare M. Cejas,
Yuli Wei,
Remi Barrois,
Christian Fretigny,
Douglas J. Durian,
Remi Dreyfus
Abstract:
We investigate the formation of fingered flow in dry granular media under simulated rainfall using a quasi-2D experimental set-up composed of a random close packing of mono-disperse glass beads. Using controlled experiments, we analyze the finger instabilities that develop from the wetting front as a function of fundamental granular (particle size) and fluid properties (rainfall, viscosity).These…
▽ More
We investigate the formation of fingered flow in dry granular media under simulated rainfall using a quasi-2D experimental set-up composed of a random close packing of mono-disperse glass beads. Using controlled experiments, we analyze the finger instabilities that develop from the wetting front as a function of fundamental granular (particle size) and fluid properties (rainfall, viscosity).These finger instabilities act as precursors for water channels, which serve as outlets for water drainage. We look into the characteristics of the homogeneous wetting front and channel size as well as estimate relevant time scales involved in the instability formation and the velocity of the channel finger tip. We compare our experimental results with that of the well-known prediction developed by Parlange and Hill [1976]. This model is based on linear stability analysis of the growth of perturbations arising at the interface between two immiscible fluids. Results show that in terms of morphology, experiments agree with the proposed model. However, in terms of kinetics we nevertheless account for another term that describes the homogenization of the wetting front. This result shows that the manner we introduce the fluid to a porous medium can also influence the formation of finger instabilities.
△ Less
Submitted 14 March, 2014; v1 submitted 13 March, 2014;
originally announced March 2014.
-
Adhesive contact of elastomers: effective adhesion energy and creep function
Authors:
Etienne Barthel,
Christian Frétigny
Abstract:
For the adhesive contact of elastomers, we propose expressions to quantify the impact of viscoelastic response on effective adhesion energy as a function of contact edge velocity. The expressions we propose are simple analytical functionals of the creep response and should be suitable for experimental data analysis in terms of measured rheologies. We also emphasize the role of the coupling betwe…
▽ More
For the adhesive contact of elastomers, we propose expressions to quantify the impact of viscoelastic response on effective adhesion energy as a function of contact edge velocity. The expressions we propose are simple analytical functionals of the creep response and should be suitable for experimental data analysis in terms of measured rheologies. We also emphasize the role of the coupling between local stress field at the contact edge and the macroscopic remote loading (far field). We show that the contrast between growing and receding contact originates from the impact of viscoelastic response on coupling, while the separation process at the contact edge is similarly affected by viscoelasticity in both cases.
△ Less
Submitted 11 June, 2009;
originally announced June 2009.
-
Surface Fluctuations of an Aging Colloidal Suspension: Evidence for Intermittent Quakes
Authors:
Alexandre Mamane,
Christian Frétigny,
François Lequeux,
Laurence Talini
Abstract:
We present measurements of the thermal fluctuations of the free surface of an aging colloidal suspension, Laponite. The technique consists in measuring the fluctuations of the position of a laser beam that reflects from the free surface. Analysing the data statistics, we show that, as the fluid ages, the dynamics becomes intermittent. The intermittent events correspond to large changes in the lo…
▽ More
We present measurements of the thermal fluctuations of the free surface of an aging colloidal suspension, Laponite. The technique consists in measuring the fluctuations of the position of a laser beam that reflects from the free surface. Analysing the data statistics, we show that, as the fluid ages, the dynamics becomes intermittent. The intermittent events correspond to large changes in the local slope of the free surface over a few milliseconds. We show that those quakes are uncorrelated, although they are kept in memory by the surface over short time scales.
△ Less
Submitted 25 March, 2009;
originally announced March 2009.
-
Probing thermal waves on the free surface of various media: Surface Fluctuation Specular Reflection Spectroscopy
Authors:
Astrid Tay,
Caroline Thibierge,
Danièle Fournier,
Christian Frétigny,
François Lequeux,
Cécile Monteux,
Jean-Paul Roger,
Laurence Talini
Abstract:
Thermal motion gives rise to fluctuations in free surfaces; the propagation of the thermally excited waves on such surfaces depends on the mechanical properties of the medium. Their measurement can therefore provide information on those properties. We have developed an optical tool to probe the thermally excited waves on free surfaces: Surface Fluctuation Specular Reflection (SFSR) spectroscopy.…
▽ More
Thermal motion gives rise to fluctuations in free surfaces; the propagation of the thermally excited waves on such surfaces depends on the mechanical properties of the medium. Their measurement can therefore provide information on those properties. We have developed an optical tool to probe the thermally excited waves on free surfaces: Surface Fluctuation Specular Reflection (SFSR) spectroscopy. It consists in measuring the fluctuations in the position of a laser beam, which is specularly reflected onto the free surface of a medium, and is therefore sensitive to the roughness of that surface. We show how the measured signal is related to the medium properties. We also present measurements performed on Newtonian liquids as well as on a viscoelastic solid; we show that, in all cases, there is a very good agreement between experimental and computed spectra. SFSR thus applies to a broad range of materials. It moreover offers a very good temporal resolution and should provide a useful tool for dynamical measurements on complex fluids.
△ Less
Submitted 16 June, 2008;
originally announced June 2008.
-
Elastic contact to nearly incompressible coatings -- Stiffness enhancement and elastic pile-up
Authors:
Etienne Barthel,
Antoine Perriot,
Antoine Chateauminois,
Christian Frétigny
Abstract:
We have recently proposed an efficient computation method for the frictionless linear elastic axisymmetric contact of coated bodies [A. Perriot and E. Barthel, J. Mat. Res. 19 (2004) 600]. Here we give a brief description of the approach. We also discuss implications of the results for the instrumented indentation data analysis of coated materials. Emphasis is laid on incompressible or nearly in…
▽ More
We have recently proposed an efficient computation method for the frictionless linear elastic axisymmetric contact of coated bodies [A. Perriot and E. Barthel, J. Mat. Res. 19 (2004) 600]. Here we give a brief description of the approach. We also discuss implications of the results for the instrumented indentation data analysis of coated materials. Emphasis is laid on incompressible or nearly incompressible materials (Poisson ratio $ν>0.4$): we show that the contact stiffness rises much more steeply with contact radius than for more compressible materials and significant elastic pile-up is evidenced. In addition the dependence of the penetration upon contact radius increasingly deviates from the homogeneous reference case when the Poisson ratio increases. As a result, this algorithm may be helpful in instrumented indentation data analysis on soft and nearly incompressible layers.
△ Less
Submitted 16 May, 2006;
originally announced May 2006.