-
Dark Matter Detector Radioimpurities $^{129}$I and $^{210}$Pb Measured with Accelerator Mass Spectrometry
Authors:
Zuzana Slavkovská,
Ferdos Dastgiri,
L. Keith Fifield,
Michaela B. Froehlich,
Michael A. C. Hotchkis,
Dominik Koll,
Silke Merchel,
Stefan Pavetich,
Stephen G. Tims,
Anton Wallner
Abstract:
Sodium iodide crystals doped with thallium NaI(Tl) can be used as detector material for direct dark matter detection by taking advantage of their particle detection properties of scintillation. In order to achieve this, it is crucial that these crystals are of ultra-high purity. Radioimpurities within the crystals may potentially mimic dark matter signals and thus must be quantified, minimised whe…
▽ More
Sodium iodide crystals doped with thallium NaI(Tl) can be used as detector material for direct dark matter detection by taking advantage of their particle detection properties of scintillation. In order to achieve this, it is crucial that these crystals are of ultra-high purity. Radioimpurities within the crystals may potentially mimic dark matter signals and thus must be quantified, minimised where possible and distinguished from real events. Abundances of radionuclides $^{129}$I and $^{210}$Pb, which are dominant sources of radioimpurities in NaI(Tl) crystals, were measured using accelerator mass spectrometry at the Australian National University (ANU) and the Australian Nuclear Science and Technology Organisation (ANSTO). NaI powder chemically processed to AgI, and, for the first time, unprocessed NaI powder, were shown to be suitable as AMS targets. A consistent $^{129}$I/$^{127}$I ratio of (2.0 $\pm$ 0.3) x 10$^{-13}$ was measured in three different commercially available NaI powders. Therefore, it was concluded that the choice of NaI powder has a negligible influence on the $^{129}$I contribution to low-background dark matter experiments. For $^{210}$Pb, different Pb molecular ion species were assessed with PbO$_2^-$ being the preferred species and applied to investigate different lead oxide compounds for their suitability as Pb carriers. A $^{210}$Pb/Pb isotopic ratio of (3.6 $\pm$ $^{1.7}_{1.4}$) x 10$^{-15}$ was measured in Pb$_3$O$_4$ powder. This met the required lower activity limit of $^{210}$Pb when adding 1 mg of stable lead into 1 kg of NaI(Tl) powder with a desired maximum $^{210}$Pb/Pb isotopic ratio of 1 x 10$^{-14}$. These results indicate the suitability of the investigated Pb$_3$O$_4$ as a potential carrier for incorporation with Pb extracted from NaI used for dark matter experiments.
△ Less
Submitted 13 June, 2025;
originally announced June 2025.
-
Characterisation of Hamamatsu R11065-20 PMTs for use in the SABRE South NaI(Tl) Crystal Detectors
Authors:
O. Stanley,
W. J. D. Melbourne,
P. Urquijo,
E. Barberio,
V. U. Bashu,
L. J. Bignell,
I. Bolognino,
G. Brooks,
S. S. Chhun,
F. Dastgiri,
M. B. Froehlich,
T. Fruth,
G. Fu,
G. C. Hill,
R. S. James,
K. Janssens,
S. Kapoor,
G. J. Lane,
K. T. Leaver,
P. McGee,
P. C. McNamara,
J. McKenzie,
L. J. McKie,
M. Mews,
L. J. Milligan
, et al. (9 additional authors not shown)
Abstract:
The SABRE Experiment is a direct detection dark matter experiment using a target composed of multiple NaI(Tl) crystals. The experiment aims to be an independent check of the DAMA/LIBRA results with a detector in the Northern (Laboratori Nazionali Del Gran Sasso, LNGS) and Southern (Stawell Underground Physics Laboratory, SUPL) hemispheres. The SABRE South photomultiplier tubes (PMTs) will be used…
▽ More
The SABRE Experiment is a direct detection dark matter experiment using a target composed of multiple NaI(Tl) crystals. The experiment aims to be an independent check of the DAMA/LIBRA results with a detector in the Northern (Laboratori Nazionali Del Gran Sasso, LNGS) and Southern (Stawell Underground Physics Laboratory, SUPL) hemispheres. The SABRE South photomultiplier tubes (PMTs) will be used near the low energy noise threshold and require a detailed calibration of their performance and contributions to the background in the NaI(Tl) dark matter search, prior to installation. We present the development of the pre-calibration procedures for the R11065-20 Hamamatsu PMTs. These PMTs are directly coupled to the NaI(Tl) crystals within the SABRE South experiment. In this paper we present methodologies to characterise the gain, dark rate, and timing properties of the PMTs. We develop a method for in-situ calibration without a light injection source. Additionally we explore the application of machine learning techniques using a Boosted Decision Tree (BDT) trained on the response of single PMTs to understand the information available for background rejection. Finally, we briefly present the simulation tool used to generate digitised PMT data from optical Monte Carlo simulations.
△ Less
Submitted 15 June, 2025; v1 submitted 23 April, 2025;
originally announced April 2025.
-
Machine Learning in Biomechanics: Key Applications and Limitations in Walking, Running, and Sports Movements
Authors:
Carlo Dindorf,
Fabian Horst,
Djordje Slijepčević,
Bernhard Dumphart,
Jonas Dully,
Matthias Zeppelzauer,
Brian Horsak,
Michael Fröhlich
Abstract:
This chapter provides an overview of recent and promising Machine Learning applications, i.e. pose estimation, feature estimation, event detection, data exploration & clustering, and automated classification, in gait (walking and running) and sports biomechanics. It explores the potential of Machine Learning methods to address challenges in biomechanical workflows, highlights central limitations,…
▽ More
This chapter provides an overview of recent and promising Machine Learning applications, i.e. pose estimation, feature estimation, event detection, data exploration & clustering, and automated classification, in gait (walking and running) and sports biomechanics. It explores the potential of Machine Learning methods to address challenges in biomechanical workflows, highlights central limitations, i.e. data and annotation availability and explainability, that need to be addressed, and emphasises the importance of interdisciplinary approaches for fully harnessing the potential of Machine Learning in gait and sports biomechanics.
△ Less
Submitted 5 March, 2025;
originally announced March 2025.
-
Realizing Quantitative Quasiparticle Modeling of Skyrmion Dynamics in Arbitrary Potentials
Authors:
Maarten A. Brems,
Tobias Sparmann,
Simon M. Fröhlich,
Leonie-C. Dany,
Jan Rothörl,
Fabian Kammerbauer,
Elizabeth M. Jefremovas,
Oded Farago,
Mathias Kläui,
Peter Virnau
Abstract:
We demonstrate fully quantitative Thiele model simulations of magnetic skyrmion dynamics on previously unattainable experimentally relevant large length and time scales by ascertaining the key missing parameters needed to calibrate the experimental and simulation time scales and current-induced forces. Our work allows us to determine complete spatial pinning energy landscapes that enable quantific…
▽ More
We demonstrate fully quantitative Thiele model simulations of magnetic skyrmion dynamics on previously unattainable experimentally relevant large length and time scales by ascertaining the key missing parameters needed to calibrate the experimental and simulation time scales and current-induced forces. Our work allows us to determine complete spatial pinning energy landscapes that enable quantification of experimental studies of diffusion in arbitrary potentials within the Lifson-Jackson framework. Our method enables us to ascertain the time scales, and by isolating the effect of ultra-low current density (order $10^6 A/m^2$) generated torques we directly infer the total force acting on the skyrmion for a quantitative modelling.
△ Less
Submitted 5 February, 2025;
originally announced February 2025.
-
Large-scale stochastic simulation of open quantum systems
Authors:
Aaron Sander,
Maximilian Fröhlich,
Martin Eigel,
Jens Eisert,
Patrick Gelß,
Michael Hintermüller,
Richard M. Milbradt,
Robert Wille,
Christian B. Mendl
Abstract:
Understanding the precise interaction mechanisms between quantum systems and their environment is crucial for advancing stable quantum technologies, designing reliable experimental frameworks, and building accurate models of real-world phenomena. However, simulating open quantum systems, which feature complex non-unitary dynamics, poses significant computational challenges that require innovative…
▽ More
Understanding the precise interaction mechanisms between quantum systems and their environment is crucial for advancing stable quantum technologies, designing reliable experimental frameworks, and building accurate models of real-world phenomena. However, simulating open quantum systems, which feature complex non-unitary dynamics, poses significant computational challenges that require innovative methods to overcome. In this work, we introduce the tensor jump method (TJM), a scalable, embarrassingly parallel algorithm for stochastically simulating large-scale open quantum systems, specifically Markovian dynamics captured by Lindbladians. This method is built on three core principles where, in particular, we extend the Monte Carlo wave function (MCWF) method to matrix product states, use a dynamic time-dependent variational principle (TDVP) to significantly reduce errors during time evolution, and introduce what we call a sampling MPS to drastically reduce the dependence on the simulation's time step size. We demonstrate that this method scales more effectively than previous methods and ensures convergence to the Lindbladian solution independent of system size, which we show both rigorously and numerically. Finally, we provide evidence of its utility by simulating Lindbladian dynamics of XXX Heisenberg models up to a thousand spins using a consumer-grade CPU. This work represents a significant step forward in the simulation of large-scale open quantum systems, with the potential to enable discoveries across various domains of quantum physics, particularly those where the environment plays a fundamental role, and to both dequantize and facilitate the development of more stable quantum hardware.
△ Less
Submitted 29 January, 2025;
originally announced January 2025.
-
Imaging Topological Defect Dynamics Mediating 2D Skyrmion Lattice Melting
Authors:
Raphael Gruber,
Jan Rothörl,
Simon M. Fröhlich,
Maarten A. Brems,
Fabian Kammerbauer,
Maria-Andromachi Syskaki,
Elizabeth M. Jefremovas,
Sachin Krishnia,
Asle Sudbø,
Peter Virnau,
Mathias Kläui
Abstract:
Topological defects are the key feature mediating 2D phase transitions. However, both resolution and tunability have been lacking to access the dynamics of the transitions. With dynamic Kerr microscopy, we directly capture the melting of a confined 2D magnetic skyrmion lattice with high resolution in real-time and -space. Skyrmions in magnetic thin films are two-dimensional, topologically non-triv…
▽ More
Topological defects are the key feature mediating 2D phase transitions. However, both resolution and tunability have been lacking to access the dynamics of the transitions. With dynamic Kerr microscopy, we directly capture the melting of a confined 2D magnetic skyrmion lattice with high resolution in real-time and -space. Skyrmions in magnetic thin films are two-dimensional, topologically non-trivial quasi-particles that provide rich dynamics as well as unique tunability as an essential ingredient for controlling phase behavior: We tune the skyrmion size and effective temperature on the fly to drive the two-step melting through an intermediate hexatic regime between the solid lattice and the isotropic liquid. We quantify the characteristic occurrence of topological defects mediating the transitions and reveal the so-far inaccessible dynamics of the lattice dislocations. The full real-time and -space imaging reveals the diffusion coefficient of the dislocations, which we find to be orders of magnitudes higher than that of the skyrmions.
△ Less
Submitted 22 January, 2025;
originally announced January 2025.
-
The SABRE South Technical Design Report Executive Summary
Authors:
E. Barberio,
T. Baroncelli,
V. U. Bashu,
L. J. Bignell,
I. Bolognino,
G. Brooks,
S. S. Chhun,
F. Dastgiri,
A. Di Giacinto,
G. D'Imperio,
A. R. Duffy,
M. B. Froehlich,
T. Fruth,
G. Fu,
G. C. Hill,
R. S. James,
K. Janssens,
S. Kapoor,
G. J. Lane,
K. T. Leaver,
A. Mariani,
P. McGee,
L. J. McKie,
P. C. McNamara,
J. McKenzie
, et al. (20 additional authors not shown)
Abstract:
In this technical design report (TDR) executive summary we describe the SABRE South detector to be built at the Stawell Underground Physics Laboratory (SUPL). The SABRE South detector is designed to test the long-standing DAMA/LIBRA signal of an annually modulating rate consistent with dark matter by using the same target material. Located in the Southern Hemisphere, the detector is uniquely posit…
▽ More
In this technical design report (TDR) executive summary we describe the SABRE South detector to be built at the Stawell Underground Physics Laboratory (SUPL). The SABRE South detector is designed to test the long-standing DAMA/LIBRA signal of an annually modulating rate consistent with dark matter by using the same target material. Located in the Southern Hemisphere, the detector is uniquely positioned to disentangle modulating seasonal effects. SABRE South uses seven ultra-high purity NaI(Tl) crystals (with a total target mass of either 35 kg or 50 kg), hermetically sealed in copper enclosures that are suspended within a liquid scintillator active veto. High quantum efficiency and low background Hamamatsu R11065 photomultiplier tubes are directly coupled to both ends of the crystal, and enclosed with the crystal in an oxygen free copper enclosure. The active veto system consists of 11.6 kL of linear alkylbenzene (LAB) doped with a mixture of fluorophores and contained in a steel vessel, which is instrumented with at least 18 Hamamatsu R5912 photomultipliers. The active veto tags key radiogenic backgrounds intrinsic to the crystals, such as ${^{40}}$K, and is expected to suppress the total background by 27% in the 1-6 keV region of interest. In addition to the liquid scintillator veto, a muon veto is positioned above the detector shielding. This muon veto consists of eight EJ-200 scintillator modules, with Hamamatsu R13089 photomultipliers coupled to both ends. With an expected total background of 0.72 cpd/kg/keV, SABRE South can test the DAMA/LIBRA signal with 5$σ$ discovery or 3$σ$ exclusion after two years of data taking.
△ Less
Submitted 9 April, 2025; v1 submitted 21 November, 2024;
originally announced November 2024.
-
The DAMA/LIBRA signal: an induced modulation effect?
Authors:
R. S. James,
K. Rule,
E. Barberio,
V. U. Bashu,
L. J. Bignell,
I. Bolognino,
G. Brooks,
S. S. Chhun,
F. Dastgiri,
A. R. Duffy,
M. Froehlich,
T. M. A. Fruth,
G. Fu,
G. C. Hill,
K. Janssens,
S. Kapoor,
G. J. Lane,
K. T. Leaver,
P. McGee,
L. J. McKie,
P. C. McNamara,
J. McKenzie,
W. J. D. Melbourne,
M. Mews,
L. J. Milligan
, et al. (14 additional authors not shown)
Abstract:
The persistence of the DAMA/LIBRA (DAMA) modulation over the past two decades has been a source of great contention within the dark matter community. The DAMA collaboration reports a persistent, modulating event rate within their setup of NaI(Tl) scintillating crystals at the INFN Laboratori Nazionali del Gran Sasso (LNGS) underground laboratory. A recent work alluded that this signal could have a…
▽ More
The persistence of the DAMA/LIBRA (DAMA) modulation over the past two decades has been a source of great contention within the dark matter community. The DAMA collaboration reports a persistent, modulating event rate within their setup of NaI(Tl) scintillating crystals at the INFN Laboratori Nazionali del Gran Sasso (LNGS) underground laboratory. A recent work alluded that this signal could have arisen due to an analysis artefact, caused by DAMA not accounting for time variation of decaying background radioisotopes in their analysis procedure. In this work, we examine in detail this 'induced modulation' effect, arguing that a number of aspects of the DAMA signal are incompatible with an induced modulation arising from decays of background isotopes over the lifetime of the experiment. Using a toy model of the DAMA/LIBRA experiment, we explore the induced modulation effect under different variations of the activities of the relevant isotopes - namely, $^3$H and $^{210}$Pb - highlighting the various inconsistencies between the resultant toy datasets and the DAMA signal. We stress the importance of the SABRE experiment, whose goal is to unambiguously test for the presence of such a modulating signal in an experiment using the same target material and comparable levels of background.
△ Less
Submitted 28 March, 2025; v1 submitted 16 August, 2024;
originally announced August 2024.
-
TruEyes: Utilizing Microtasks in Mobile Apps for Crowdsourced Labeling of Machine Learning Datasets
Authors:
Chandramohan Sudar,
Michael Froehlich,
Florian Alt
Abstract:
The growing use of supervised machine learning in research and industry has increased the need for labeled datasets. Crowdsourcing has emerged as a popular method to create data labels. However, working on large batches of tasks leads to worker fatigue, negatively impacting labeling quality. To address this, we present TruEyes, a collaborative crowdsourcing system, enabling the distribution of mic…
▽ More
The growing use of supervised machine learning in research and industry has increased the need for labeled datasets. Crowdsourcing has emerged as a popular method to create data labels. However, working on large batches of tasks leads to worker fatigue, negatively impacting labeling quality. To address this, we present TruEyes, a collaborative crowdsourcing system, enabling the distribution of micro-tasks to mobile app users. TruEyes allows machine learning practitioners to publish labeling tasks, mobile app developers to integrate task ads for monetization, and users to label data instead of watching advertisements. To evaluate the system, we conducted an experiment with N=296 participants. Our results show that the quality of the labeled data is comparable to traditional crowdsourcing approaches and most users prefer task ads over traditional ads. We discuss extensions to the system and address how mobile advertisement space can be used as a productive resource in the future.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Simulation and background characterisation of the SABRE South experiment
Authors:
E. Barberio,
T. Baroncelli,
L. J. Bignell,
I. Bolognino,
G. Brooks,
F. Dastgiri,
G. D'Imperio,
A. Di Giacinto,
A. R. Duffy,
M. Froehlich,
G. Fu,
M. S. M. Gerathy,
G. C. Hill,
S. Krishnan,
G. J. Lane,
G. Lawrence,
K. T. Leaver,
I. Mahmood,
A. Mariani,
P. McGee,
L. J. McKie,
P. C. McNamara,
M. Mews,
W. J. D. Melbourne,
G. Milana
, et al. (16 additional authors not shown)
Abstract:
SABRE (Sodium iodide with Active Background REjection) is a direct detection dark matter experiment based on arrays of radio-pure NaI(Tl) crystals. The experiment aims at achieving an ultra-low background rate and its primary goal is to confirm or refute the results from the DAMA/LIBRA experiment. The SABRE Proof-of-Principle phase was carried out in 2020-2021 at the Gran Sasso National Laboratory…
▽ More
SABRE (Sodium iodide with Active Background REjection) is a direct detection dark matter experiment based on arrays of radio-pure NaI(Tl) crystals. The experiment aims at achieving an ultra-low background rate and its primary goal is to confirm or refute the results from the DAMA/LIBRA experiment. The SABRE Proof-of-Principle phase was carried out in 2020-2021 at the Gran Sasso National Laboratory (LNGS), in Italy. The next phase consists of two full-scale experiments: SABRE South at the Stawell Underground Physics Laboratory, in Australia, and SABRE North at LNGS. This paper focuses on SABRE South and presents a detailed simulation of the detector, which is used to characterise the background for dark matter searches including DAMA/LIBRA-like modulation. We estimate an overall background of 0.72 cpd/kg/keV$_{ee}$ in the energy range 1$-$6 keV$_{ee}$ primarily due to radioactive contamination in the crystals. Given this level of background and considering that the SABRE South has a target mass of 50 kg, we expect to exclude (confirm) DAMA/LIBRA modulation at $4~(5)σ$ within 2.5 years of data taking.
△ Less
Submitted 12 May, 2023; v1 submitted 27 May, 2022;
originally announced May 2022.
-
Designing Trustworthy User Interfaces for the Voluntary Carbon Market: A Randomized Online Experiment
Authors:
Klaudia Guzij,
Michael Fröhlich,
Florian Fincke,
Albrecht Schmidt,
Florian Alt
Abstract:
The voluntary carbon market is an important building block in the fight against climate change. However, it is not trivial for consumers to verify whether carbon offset projects deliver what they promise. While technical solutions for measuring their impact are emerging, there is a lack of understanding of how to translate this data into interface designs that mediate the establishment of trust. W…
▽ More
The voluntary carbon market is an important building block in the fight against climate change. However, it is not trivial for consumers to verify whether carbon offset projects deliver what they promise. While technical solutions for measuring their impact are emerging, there is a lack of understanding of how to translate this data into interface designs that mediate the establishment of trust. With interaction between users and offset projects mainly happening online, it is critical to meet this design challenge. To this end, we designed and evaluated interfaces with varying trust cues for carbon offset projects in a randomized online experiment (n=244). Our results show that content design, particularly financial and forest-related quantitative data presented at the right detail level, increases the perceived trustworthiness, while images have no significant effect. We contribute the first specific guidance for interface designers for carbon offsets and discuss implications for interaction design.
△ Less
Submitted 22 April, 2022;
originally announced April 2022.
-
Blockchain and Cryptocurrency in Human Computer Interaction: A Systematic Literature Review and Research Agenda
Authors:
Michael Fröhlich,
Franz Waltenberger,
Ludwig Trotter,
Florian Alt,
Albrecht Schmidt
Abstract:
We present a systematic literature review of cryptocurrency and blockchain research in Human-Computer Interaction (HCI) published between 2014 and 2021. We aim to provide an overview of the field, consolidate existing knowledge, and chart paths for future research. Our analysis of 99 articles identifies six major themes: (1) the role of trust, (2) understanding motivation, risk, and perception of…
▽ More
We present a systematic literature review of cryptocurrency and blockchain research in Human-Computer Interaction (HCI) published between 2014 and 2021. We aim to provide an overview of the field, consolidate existing knowledge, and chart paths for future research. Our analysis of 99 articles identifies six major themes: (1) the role of trust, (2) understanding motivation, risk, and perception of cryptocurrencies, (3) cryptocurrency wallets, (4) engaging users with blockchain, (5) using blockchain for application-specific use cases, and (6) support tools for blockchain. We discuss the focus of the existing research body and juxtapose it to the changing landscape of emerging blockchain technologies to highlight future research avenues for HCI and interaction design. With this review, we identify key aspects where interaction design is critical for the adoption of blockchain systems. Doing so, we provide a starting point for new scholars and designers and help them position future contributions.
△ Less
Submitted 22 April, 2022;
originally announced April 2022.
-
Recoil imaging for directional detection of dark matter, neutrinos, and physics beyond the Standard Model
Authors:
C. A. J. O'Hare,
D. Loomba,
K. Altenmüller,
H. Álvarez-Pol,
F. D. Amaro,
H. M. Araújo,
D. Aristizabal Sierra,
J. Asaadi,
D. Attié,
S. Aune,
C. Awe,
Y. Ayyad,
E. Baracchini,
P. Barbeau,
J. B. R. Battat,
N. F. Bell,
B. Biasuzzi,
L. J. Bignell,
C. Boehm,
I. Bolognino,
F. M. Brunbauer,
M. Caamaño,
C. Cabo,
D. Caratelli,
J. M. Carmona
, et al. (142 additional authors not shown)
Abstract:
Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detect…
▽ More
Recoil imaging entails the detection of spatially resolved ionization tracks generated by particle interactions. This is a highly sought-after capability in many classes of detector, with broad applications across particle and astroparticle physics. However, at low energies, where ionization signatures are small in size, recoil imaging only seems to be a practical goal for micro-pattern gas detectors. This white paper outlines the physics case for recoil imaging, and puts forward a decadal plan to advance towards the directional detection of low-energy recoils with sensitivity and resolution close to fundamental performance limits. The science case covered includes: the discovery of dark matter into the neutrino fog, directional detection of sub-MeV solar neutrinos, the precision study of coherent-elastic neutrino-nucleus scattering, the detection of solar axions, the measurement of the Migdal effect, X-ray polarimetry, and several other applied physics goals. We also outline the R&D programs necessary to test concepts that are crucial to advance detector performance towards their fundamental limit: single primary electron sensitivity with full 3D spatial resolution at the $\sim$100 micron-scale. These advancements include: the use of negative ion drift, electron counting with high-definition electronic readout, time projection chambers with optical readout, and the possibility for nuclear recoil tracking in high-density gases such as argon. We also discuss the readout and electronics systems needed to scale-up such detectors to the ton-scale and beyond.
△ Less
Submitted 17 July, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
SABRE and the Stawell Underground Physics Laboratory: Dark Matter Research at the Australian National University
Authors:
Lindsey J. Bignell,
Elisabetta Barberio,
Michaela B. Froehlich,
Gregory J. Lane,
Owen Lennon,
Ibtihal Mahmood,
Francesco Nuti,
Md. Shahinur Rahman,
Cederic Simenel,
Nathan J. Spinks,
Andrew E. Stuchbery,
Heiko Timmers,
Anton Wallner,
Lei Wang,
Jo Wu,
Yi Yi Zhong
Abstract:
The direct detection of dark matter is a key problem in astroparticle physics that generally requires the use of deep-underground laboratories for a low-background environment where the rare signals from dark matter interactions can be observed. This work reports on the Stawell Underground Physics Laboratory - currently under construction and the first such laboratory in the Southern Hemisphere -…
▽ More
The direct detection of dark matter is a key problem in astroparticle physics that generally requires the use of deep-underground laboratories for a low-background environment where the rare signals from dark matter interactions can be observed. This work reports on the Stawell Underground Physics Laboratory - currently under construction and the first such laboratory in the Southern Hemisphere - and the associated research program. A particular focus will be given to ANU's contribution to SABRE, a NaI:Tl dark matter direct detection experiment that aims to confirm or refute the long-standing DAMA result. Preliminary measurements of the NaI:Tl quenching factor and characterisation of the SABRE liquid scintillator veto are reported.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
Two Examples of COM Bounds using Spectral Gaps: Length of the LIS in a Random Permutation and Lipschitz Functions of 1d Markov Chains
Authors:
Michael Froehlich,
Shannon Starr
Abstract:
We consider two examples for a well-known method for obtaining concentration of measure (COM) bounds for a given observable in a given measure. The method is to consider an auxiliary Markov chain for which the invariant distribution is the measure of interest. Then one obtains COM bounds involving two quantities. The first is the spectral gap of the Markov transition matrix. The second is an appro…
▽ More
We consider two examples for a well-known method for obtaining concentration of measure (COM) bounds for a given observable in a given measure. The method is to consider an auxiliary Markov chain for which the invariant distribution is the measure of interest. Then one obtains COM bounds involving two quantities. The first is the spectral gap of the Markov transition matrix. The second is an appropriate Lipschitz constant for the observable of interest with respect to 1 step of the Markov chain.
We consider two examples of the basic method. The first is to obtain rough COM bounds for the length of the longest increasing subsequence (LIS) in a uniform random permutation. The bounds are similar to well-known bounds of Talagrand using his isoperimetric inequality.
The second example is to consider a 1d Markov chain: $X_0,X_1,\dots,X_n$. We assume the invariant measure for the chain $μ$ is reversible, and let the initial distribution of $X_0$ be $μ$. Then the observable of interest is any function $f(X_0,X_1,\dots,X_n)$, which is Lipschitz with respect to replacement of single variables. One case of this is `target frequency analysis,' which is of interest in biostatistics. The auxiliary Markov chain is Glauber dynamics which is gapped in 1d.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
3D gravity and non-linear cosmology
Authors:
F. P. Devecchi,
M. L. Froehlich
Abstract:
By the inclusion of an additional term, non-linear in the scalar curvature $R$, it is tested if dark energy could rise as a geometrical effect in 3D gravitational formulations. We investigate a cosmological fluid obeying a non-polytropic equation of state (the van der Waals equation) that is used to construct the energy-momentum tensor of the sources, representing the hypothetical inflaton in gr…
▽ More
By the inclusion of an additional term, non-linear in the scalar curvature $R$, it is tested if dark energy could rise as a geometrical effect in 3D gravitational formulations. We investigate a cosmological fluid obeying a non-polytropic equation of state (the van der Waals equation) that is used to construct the energy-momentum tensor of the sources, representing the hypothetical inflaton in gravitational interaction with a matter contribution.
Following the evolution in time of the scale factor, its acceleration, and the energy densities of constituents it is possible to construct the description of an inflationary 3D universe, followed by a matter dominated era. For later times it is verified that, under certain conditions, the non-linear term in $R$ can generate the old 3D universe in accelerated expansion, where the ordinary matter is represented by the barotropic limit of the van der Waals constituent.
△ Less
Submitted 11 October, 2005;
originally announced October 2005.
-
Non-linear terms in 2D cosmology
Authors:
F. P. Devecchi,
M. L. Froehlich
Abstract:
In this work we investigate the behavior of two-dimensional (2D) cosmological models, starting with the Jackiw-Teitelboim (JT) theory of gravitation. A geometrical term, non-linear in the scalar curvature $R$, is added to the JT dynamics to test if it could play the role of dark energy in a 2D expanding universe. This formulation makes possible, first, the description of an early (inflationary)…
▽ More
In this work we investigate the behavior of two-dimensional (2D) cosmological models, starting with the Jackiw-Teitelboim (JT) theory of gravitation. A geometrical term, non-linear in the scalar curvature $R$, is added to the JT dynamics to test if it could play the role of dark energy in a 2D expanding universe. This formulation makes possible, first, the description of an early (inflationary) 2D universe, when the van der Waals (vdW) equation of state is used to construct the energy-momentum tensor of the gravitational sources. Second, it is found that for later times the non-linear term in $R$ can generate an old 2D universe in accelerated expansion, where an ordinary matter dominated era evolves into a decelerated/accelerated transition, giving to the dark energy effects a geometrical origin. The results emerge through numerical analysis, following the evolution in time of the scale factor, its acceleration, and the energy densities of constituents.
△ Less
Submitted 12 May, 2005;
originally announced May 2005.
