Showing 1–24 of 24 results for author: Fontaine, J

Foundation Model for Wireless Technology Recognition Using IQ Timeseries

Authors: Mohammad Cheraghinia, Eli De Poorter, Jaron Fontaine, Merouane Debbah, Adnan Shahid

Abstract: Wireless Technology Recognition (WTR) is essential in modern communication systems, enabling efficient spectrum management and the seamless coexistence of diverse technologies. In real-world conditions, WTR solutions should be able to handle signals from various resources with different sampling rates, capturing devices, and frequency bands. However, traditional WTR methods, which rely on energy d… ▽ More Wireless Technology Recognition (WTR) is essential in modern communication systems, enabling efficient spectrum management and the seamless coexistence of diverse technologies. In real-world conditions, WTR solutions should be able to handle signals from various resources with different sampling rates, capturing devices, and frequency bands. However, traditional WTR methods, which rely on energy detection, Convolutional Neural Network (CNN) models, or Deep Learning (DL), lack the robustness and adaptability required to generalize across unseen environments, different sampling devices, and previously unencountered signal classes. In this work, we introduce a Transformer-based foundation model for WTR, trained in an unsupervised manner on large-scale, unlabeled wireless signal datasets. Foundation models are designed to learn general-purpose representations that transfer effectively across tasks and domains, allowing generalization towards new technologies and WTR sampling devices. Our approach leverages input patching for computational efficiency and incorporates a two-stage training pipeline: unsupervised pre-training followed by lightweight fine-tuning. This enables the model to generalize to new wireless technologies and environments using only a small number of labeled samples. Experimental results demonstrate that our model achieves superior accuracy across varying sampling rates and frequency bands while maintaining low computational complexity, supporting the vision of a reusable wireless foundation model adaptable to new technologies with minimal retraining. △ Less

Submitted 25 May, 2025; originally announced May 2025.

Comments: 13 pages, 8 figures

Low-cost Embedded Breathing Rate Determination Using 802.15.4z IR-UWB Hardware for Remote Healthcare

Authors: Anton Lambrecht, Stijn Luchie, Jaron Fontaine, Ben Van Herbruggen, Adnan Shahid, Eli De Poorter

Abstract: Respiratory diseases account for a significant portion of global mortality. Affordable and early detection is an effective way of addressing these ailments. To this end, a low-cost commercial off-the-shelf (COTS), IEEE 802.15.4z standard compliant impulse-radio ultra-wideband (IR-UWB) radar system is exploited to estimate human respiration rates. We propose a convolutional neural network (CNN) to… ▽ More Respiratory diseases account for a significant portion of global mortality. Affordable and early detection is an effective way of addressing these ailments. To this end, a low-cost commercial off-the-shelf (COTS), IEEE 802.15.4z standard compliant impulse-radio ultra-wideband (IR-UWB) radar system is exploited to estimate human respiration rates. We propose a convolutional neural network (CNN) to predict breathing rates from ultra-wideband (UWB) channel impulse response (CIR) data, and compare its performance with other rule-based algorithms. The study uses a diverse dataset of 16 individuals, incorporating various real-life environments to evaluate system robustness. Results show that the CNN achieves a mean absolute error (MAE) of 1.73 breaths per minute (BPM) in unseen situations, significantly outperforming rule-based methods (3.40 BPM). By incorporating calibration data from other individuals in the unseen situations, the error is further reduced to 0.84 BPM. In addition, this work evaluates the feasibility of running the pipeline on a low-cost embedded device. Applying 8-bit quantization to both the weights and input/ouput tensors, reduces memory requirements by 67% and inference time by 64% with only a 3% increase in MAE. As a result, we show it is feasible to deploy the algorithm on an nRF52840 system-on-chip (SoC) requiring only 46 KB of memory and operating with an inference time of only 192 ms. Once deployed, the system can last up to 268 days without recharging using a 20 000 mAh battery pack. For breathing monitoring in bed, the sampling rate can be lowered, extending battery life to 313 days, making the solution highly efficient for real-world, low-cost deployments. △ Less

Submitted 3 April, 2025; originally announced April 2025.

Comments: This paper has been submitted to IEEE Sensors Journal and is currently undergoing review

Large-Scale AI in Telecom: Charting the Roadmap for Innovation, Scalability, and Enhanced Digital Experiences

Authors: Adnan Shahid, Adrian Kliks, Ahmed Al-Tahmeesschi, Ahmed Elbakary, Alexandros Nikou, Ali Maatouk, Ali Mokh, Amirreza Kazemi, Antonio De Domenico, Athanasios Karapantelakis, Bo Cheng, Bo Yang, Bohao Wang, Carlo Fischione, Chao Zhang, Chaouki Ben Issaid, Chau Yuen, Chenghui Peng, Chongwen Huang, Christina Chaccour, Christo Kurisummoottil Thomas, Dheeraj Sharma, Dimitris Kalogiros, Dusit Niyato, Eli De Poorter , et al. (110 additional authors not shown)

Abstract: This white paper discusses the role of large-scale AI in the telecommunications industry, with a specific focus on the potential of generative AI to revolutionize network functions and user experiences, especially in the context of 6G systems. It highlights the development and deployment of Large Telecom Models (LTMs), which are tailored AI models designed to address the complex challenges faced b… ▽ More This white paper discusses the role of large-scale AI in the telecommunications industry, with a specific focus on the potential of generative AI to revolutionize network functions and user experiences, especially in the context of 6G systems. It highlights the development and deployment of Large Telecom Models (LTMs), which are tailored AI models designed to address the complex challenges faced by modern telecom networks. The paper covers a wide range of topics, from the architecture and deployment strategies of LTMs to their applications in network management, resource allocation, and optimization. It also explores the regulatory, ethical, and standardization considerations for LTMs, offering insights into their future integration into telecom infrastructure. The goal is to provide a comprehensive roadmap for the adoption of LTMs to enhance scalability, performance, and user-centric innovation in telecom networks. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Bluetooth Low Energy Dataset Using In-Phase and Quadrature Samples for Indoor Localization

Authors: Samuel G. Leitch, Qasim Zeeshan Ahmed, Ben Van Herbruggen, Mathias Baert, Jaron Fontaine, Eli De Poorter, Adnan Shahid, Pavlos I. Lazaridis

Abstract: One significant challenge in research is to collect a large amount of data and learn the underlying relationship between the input and the output variables. This paper outlines the process of collecting and validating a dataset designed to determine the angle of arrival (AoA) using Bluetooth low energy (BLE) technology. The data, collected in a laboratory setting, is intended to approximate real-w… ▽ More One significant challenge in research is to collect a large amount of data and learn the underlying relationship between the input and the output variables. This paper outlines the process of collecting and validating a dataset designed to determine the angle of arrival (AoA) using Bluetooth low energy (BLE) technology. The data, collected in a laboratory setting, is intended to approximate real-world industrial scenarios. This paper discusses the data collection process, the structure of the dataset, and the methodology adopted for automating sample labeling for supervised learning. The collected samples and the process of generating ground truth (GT) labels were validated using the Texas Instruments (TI) phase difference of arrival (PDoA) implementation on the data, yielding a mean absolute error (MAE) at one of the heights without obstacles of $25.71^\circ$. The distance estimation on BLE was implemented using a Gaussian Process Regression algorithm, yielding an MAE of $0.174$m. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Towards a Wireless Physical-Layer Foundation Model: Challenges and Strategies

Authors: Jaron Fontaine, Adnan Shahid, Eli De Poorter

Abstract: Artificial intelligence (AI) plays an important role in the dynamic landscape of wireless communications, solving challenges unattainable by traditional approaches. This paper discusses the evolution of wireless AI, emphasizing the transition from isolated task-specific models to more generalizable and adaptable AI models inspired by recent successes in large language models (LLMs) and computer vi… ▽ More Artificial intelligence (AI) plays an important role in the dynamic landscape of wireless communications, solving challenges unattainable by traditional approaches. This paper discusses the evolution of wireless AI, emphasizing the transition from isolated task-specific models to more generalizable and adaptable AI models inspired by recent successes in large language models (LLMs) and computer vision. To overcome task-specific AI strategies in wireless networks, we propose a unified wireless physical-layer foundation model (WPFM). Challenges include the design of effective pre-training tasks, support for embedding heterogeneous time series and human-understandable interaction. The paper presents a strategic framework, focusing on embedding wireless time series, self-supervised pre-training, and semantic representation learning. The proposed WPFM aims to understand and describe diverse wireless signals, allowing human interactivity with wireless networks. The paper concludes by outlining next research steps for WPFMs, including the integration with LLMs. △ Less

Submitted 9 February, 2024; originally announced March 2024.

Comments: This paper is under review for the WS33 IEEE ICC 2024 1st Workshop on The Impact of Large Language Models on 6G Networks

A Comprehensive Overview on UWB Radar: Applications, Standards, Signal Processing Techniques, Datasets, Radio Chips, Trends and Future Research Directions

Authors: Mohammad Cheraghinia, Adnan Shahid, Stijn Luchie, Gert-Jan Gordebeke, Olivier Caytan, Jaron Fontaine, Ben Van Herbruggen, Sam Lemey, Eli De Poorter

Abstract: Due to their large bandwidth, relatively low cost, and robust performance, UWB radio chips can be used for a wide variety of applications, including localization, communication, and radar. This article offers an exhaustive survey of recent progress in UWB radar technology. The goal of this survey is to provide a comprehensive view of the technical fundamentals and emerging trends in UWB radar. Our… ▽ More Due to their large bandwidth, relatively low cost, and robust performance, UWB radio chips can be used for a wide variety of applications, including localization, communication, and radar. This article offers an exhaustive survey of recent progress in UWB radar technology. The goal of this survey is to provide a comprehensive view of the technical fundamentals and emerging trends in UWB radar. Our analysis is categorized into multiple parts. Firstly, we explore the fundamental concepts of UWB radar technology from a technology and standardization point of view. Secondly, we examine the most relevant UWB applications and use cases, such as device-free localization, activity recognition, presence detection, and vital sign monitoring, discussing each time the bandwidth requirements, processing techniques, algorithms, latest developments, relevant example papers, and trends. Next, we steer readers toward relevant datasets and available radio chipsets. Finally, we discuss ongoing challenges and potential future research avenues. As such, this overview paper is designed to be a cornerstone reference for researchers charting the course of UWB radar technology over the last decade. △ Less

Submitted 26 April, 2025; v1 submitted 8 February, 2024; originally announced February 2024.

Comments: 37 pages, 4 figures, This paper has been accepted to IEEE Communications Surveys and Tutorials

Feature-Based Generalized Gaussian Distribution Method for NLoS Detection in Ultra-Wideband (UWB) Indoor Positioning System

Authors: Fuhu Che, Qasim Zeeshan Ahmed, Jaron Fontaine, Ben Van Herbruggen, Adnan Shahid, Eli De Poorter, Pavlos I. Lazaridis

Abstract: Non-Line-of-Sight (NLoS) propagation condition is a crucial factor affecting the precision of the localization in the Ultra-Wideband (UWB) Indoor Positioning System (IPS). Numerous supervised Machine Learning (ML) approaches have been applied for NLoS identification to improve the accuracy of the IPS. However, it is difficult for existing ML approaches to maintain a high classification accuracy wh… ▽ More Non-Line-of-Sight (NLoS) propagation condition is a crucial factor affecting the precision of the localization in the Ultra-Wideband (UWB) Indoor Positioning System (IPS). Numerous supervised Machine Learning (ML) approaches have been applied for NLoS identification to improve the accuracy of the IPS. However, it is difficult for existing ML approaches to maintain a high classification accuracy when the database contains a small number of NLoS signals and a large number of Line-of-Sight (LoS) signals. The inaccurate localization of the target node caused by this small number of NLoS signals can still be problematic. To solve this issue, we propose feature-based Gaussian Distribution (GD) and Generalized Gaussian Distribution (GGD) NLoS detection algorithms. By employing our detection algorithm for the imbalanced dataset, a classification accuracy of $96.7\%$ and $98.0\%$ can be achieved. We also compared the proposed algorithm with the existing cutting-edge such as Support-Vector-Machine (SVM), Decision Tree (DT), Naive Bayes (NB), and Neural Network (NN), which can achieve an accuracy of $92.6\%$, $92.8\%$, $93.2\%$, and $95.5\%$, respectively. The results demonstrate that the GGD algorithm can achieve high classification accuracy with the imbalanced dataset. Finally, the proposed algorithm can also achieve a higher classification accuracy for different ratios of LoS and NLoS signals which proves the robustness and effectiveness of the proposed method. △ Less

Submitted 14 April, 2023; originally announced April 2023.

Journal ref: IEEE Sensors Journal, vol. 22, no. 19, pp. 18726-18739, 1 Oct.1, 2022,

Induced action for superconformal higher-spin multiplets using SCFT techniques

Authors: Sergei M. Kuzenko, James La Fontaine, Michael Ponds

Abstract: Recently, the interacting $\mathcal{N}=1$ superconformal higher-spin theory in four dimensions has been proposed within the induced action approach. In this paper we initiate a program of computing perturbative corrections to the corresponding action and explicitly evaluate all quadratic terms. This is achieved by employing standard techniques from superconformal field theory. Recently, the interacting $\mathcal{N}=1$ superconformal higher-spin theory in four dimensions has been proposed within the induced action approach. In this paper we initiate a program of computing perturbative corrections to the corresponding action and explicitly evaluate all quadratic terms. This is achieved by employing standard techniques from superconformal field theory. △ Less

Submitted 13 March, 2023; v1 submitted 1 December, 2022; originally announced December 2022.

Comments: 12 pages; V2: Comments and Appendix A added; V3: Published Version

Multi-Static UWB Radar-based Passive Human Tracking Using COTS Devices

Authors: Chenglong Li, Emmeric Tanghe, Jaron Fontaine, Luc Martens, Jac Romme, Gaurav Singh, Eli De Poorter, Wout Joseph

Abstract: Due to its high delay resolution, the ultra-wideband (UWB) technique has been widely adopted for fine-grained indoor localization. Instead of active positioning, UWB radar-based passive human tracking is explored using commercial off-the-shelf (COTS) devices. To extract the time-of-flight (ToF) reflected by the moving person, the accumulated channel impulse responses (CIR) and the corresponding va… ▽ More Due to its high delay resolution, the ultra-wideband (UWB) technique has been widely adopted for fine-grained indoor localization. Instead of active positioning, UWB radar-based passive human tracking is explored using commercial off-the-shelf (COTS) devices. To extract the time-of-flight (ToF) reflected by the moving person, the accumulated channel impulse responses (CIR) and the corresponding variances are used to train the convolutional neural networks (CNN) model. Particle filter algorithm is adopted to track the moving person based on the extracted ToFs of all pairs of links. Experimental results show that the proposed CIR- and variance-based CNN models achieve less than 30-cm root-mean-square errors (RMSEs). Especially, the variance-based CNN model is robust to the scenario changing and promising for practical applications. △ Less

Submitted 13 December, 2021; v1 submitted 27 September, 2021; originally announced September 2021.

A versatile flexure-based 6-axes force/torque sensor and its application to tribology

Authors: M Guibert, C Oliver, T Durand, T Le Mogne, A Le Bot, D Dalmas, J Scheibert, J Fontaine

Abstract: Six-axes force/torque sensors are increasingly needed in mechanical engineering. Here, we introduce a flexure-based design for such sensors, which solves some of the drawbacks of the existing designs. In particular, it is backlash-free, it can be wirelessly monitored, it exactly enforces 90 degrees angles between axes, and it enables visual inspection of the monitored system thanks to its hollow s… ▽ More Six-axes force/torque sensors are increasingly needed in mechanical engineering. Here, we introduce a flexure-based design for such sensors, which solves some of the drawbacks of the existing designs. In particular, it is backlash-free, it can be wirelessly monitored, it exactly enforces 90 degrees angles between axes, and it enables visual inspection of the monitored system thanks to its hollow structure. We first describe the generic design, implementation and calibration procedure. We then demonstrate its capabilities through three illustration examples relevant to the field of tribology: low friction measurements under ultra-high vacuum, multi-directional friction measurements of elastomer contacts, and force/torque-based contact position monitoring. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Comments: The following article has been submitted to Review of Scientific Instruments

Spin projection operators and higher-spin Cotton tensors in three dimensions

Authors: Evgeny I. Buchbinder, Sergei M. Kuzenko, James La Fontaine, Michael Ponds

Abstract: We elaborate on the spin projection operators in three dimensions and use them to derive a new representation for the linearised higher-spin Cotton tensors. We elaborate on the spin projection operators in three dimensions and use them to derive a new representation for the linearised higher-spin Cotton tensors. △ Less

Submitted 19 March, 2019; v1 submitted 13 December, 2018; originally announced December 2018.

Comments: 17 pages; V2: references and comments added; V3: typos corrected, reference added

Photonic jet: key role of injection for etchings with a shaped optical fiber tip

Authors: Robin Pierron, Julien Zelgowski, Pierre Pfeiffer, Joël Fontaine, Sylvain Lecler

Abstract: We demonstrate the key role of the laser injection into a multimode fiber to obtain a photonic jet (PJ). PJ, a high concentrated propagating beam with a full width at half maximum smaller than the diffraction limit, is here generated with a shaped optical fiber tip using a pulsed laser source (1064~nm, 100~ns, 35~kHz). Three optical injection systems of light are compared. For similar etched marks… ▽ More We demonstrate the key role of the laser injection into a multimode fiber to obtain a photonic jet (PJ). PJ, a high concentrated propagating beam with a full width at half maximum smaller than the diffraction limit, is here generated with a shaped optical fiber tip using a pulsed laser source (1064~nm, 100~ns, 35~kHz). Three optical injection systems of light are compared. For similar etched marks on silicon with diameters around 1~$μ$m, we show that the required ablation energy is minimum when the injected light beam is close to the fundamental mode diameter of the fiber. Thus, we confirm experimentally that to obtain a PJ out of an optical fiber, light injection plays a role as important as that of the tip shape, and therefore the role of the fundamental mode in the process. △ Less

Submitted 26 October, 2018; originally announced November 2018.

Journal ref: Optics Letters, Optical Society of America, 2017, 42 (14)

Etching of semiconductors and metals by the photonic jet with shaped optical fiber tips

Authors: Robin Pierron, Sylvain Lecler, Julien Zelgowski, Pierre Pfeiffer, Frédéric Mermet, Joël Fontaine

Abstract: The etching of semiconductors and metals by a photonic jet (PJ) generated with a shaped optical ber tip is studied. Etched marks with a diameter of 1 micron have been realized on silicon, stainless steel and titanium with a 35 kHz pulsed laser, emitting 100 ns pulses at 1064 nm. The selection criteria of the ber and its tip are discussed. We show that a 100/140 silica ber is a good compromise whic… ▽ More The etching of semiconductors and metals by a photonic jet (PJ) generated with a shaped optical ber tip is studied. Etched marks with a diameter of 1 micron have been realized on silicon, stainless steel and titanium with a 35 kHz pulsed laser, emitting 100 ns pulses at 1064 nm. The selection criteria of the ber and its tip are discussed. We show that a 100/140 silica ber is a good compromise which takes into account the injection, the working distance and the energy coupled in the higherorder modes. The energy balance is performed on the basis of the known ablation threshold of the material. Finally, the dependence between the etching depth and the number of pulses is studied. Saturation is observed probably due to a redeposition of the etched material, showing that a higher pulse energy is required for deeper etchings. △ Less

Submitted 26 October, 2018; originally announced November 2018.

Journal ref: Applied Surface Science, Elsevier, 2017, 418, pp.452 - 455

The Radial Acceleration Relation (RAR): the crucial cases of Dwarf Discs and of Low Surface Brightness galaxies

Authors: Chiara Di Paolo, Paolo Salucci, Jean Philippe Fontaine

Abstract: McGaugh et al. (2016) have found, in a large sample of disc systems, a tight nonlinear relationship between the total radial accelerations $g$ and their components $g_b$ arisen from the distribution of the baryonic matter [McGaugh_2016]. Here, we investigate the existence of such relation in Dwarf Disc Spirals and Low Surface Brightness galaxies on the basis of [Karukes_2017] and [DiPaolo_2018]. W… ▽ More McGaugh et al. (2016) have found, in a large sample of disc systems, a tight nonlinear relationship between the total radial accelerations $g$ and their components $g_b$ arisen from the distribution of the baryonic matter [McGaugh_2016]. Here, we investigate the existence of such relation in Dwarf Disc Spirals and Low Surface Brightness galaxies on the basis of [Karukes_2017] and [DiPaolo_2018]. We have accurate mass profiles for 36 Dwarf Disc Spirals and 72 LSB galaxies. These galaxies have accelerations that cover the McGaugh range but also reach out to one order of magnitude below the smallest accelerations present in McGaugh et al. (2016) and span different Hubble Types. We found, in our samples, that the $g$ vs $g_b$ relation has a very different profile and also other intrinsic novel properties, among those, the dependence on a second variable: the galactic radius, normalised to the optical radius $R_{opt}$, at which the two accelerations are measured. We show that the new far than trivial $g$ vs $(g_b, r/R_{opt})$ relationship is nothing else than a direct consequence of the complex, but coordinated mass distributions of the baryons and the dark matter (DM) in disc systems. Our analysis shows that the McGaugh et al. (2016) relation is a limiting case of a new universal relation that can be very well framed in the standard "DM halo in the Newtonian Gravity" paradigm. △ Less

Submitted 17 January, 2019; v1 submitted 19 October, 2018; originally announced October 2018.

Comments: Accepted by ApJ

Almost $C_p$ Galois representations and vector bundles

Authors: Jean-Marc Fontaine

Abstract: Let $K$ be a finite extension of $\mathbb{Q}_p$ and $G_K$ the absolute Galois group. Then $G_K$ acts on the fundamental curve $X$ of $p$-adic Hodge theory and we may consider the abelian category $\mathcal{M}(G_K)$ of coherent $\mathcal{O}_X$-modules equipped with a continuous and semi-linear action of $G_K$. An almost $C_p$-representation of $G_K$ is a $p$-adic Banach space $V$ equipped with a li… ▽ More Let $K$ be a finite extension of $\mathbb{Q}_p$ and $G_K$ the absolute Galois group. Then $G_K$ acts on the fundamental curve $X$ of $p$-adic Hodge theory and we may consider the abelian category $\mathcal{M}(G_K)$ of coherent $\mathcal{O}_X$-modules equipped with a continuous and semi-linear action of $G_K$. An almost $C_p$-representation of $G_K$ is a $p$-adic Banach space $V$ equipped with a linear and continuous action of $G_K$ such that there exists $d\in\mathbb{N}$, two $G_K$-stable finite dimensional sub-$\mathbb{Q}_p$-vector spaces $U_+$ of $V$, $U_-$ of $C_p^d$, and a $G_K$-equivariant isomorphism $V/U_+\to C_p^d/U_-$. These representations form an abelian category $\mathcal{C}(G_K)$. The main purpose of this paper is to prove that $\mathcal{C}(G_K)$ can be recovered from $\mathcal{M}(G_K)$ by a simple construction (and conversely) inducing, in particular, an equivalence of triangulated categories $D^b(\mathcal{M}(G_K))\to D^b(\mathcal{C}(G_K))$. △ Less

Submitted 8 May, 2018; originally announced May 2018.

Comments: 46 pages

MSC Class: 14G20; 12J25; 14F05; 14F20; 14F30

Enhanced detection of high frequency gravitational waves using optically diluted optomechanical filters

Authors: Michael Page, Jiayi Qin, James La Fontaine, Chunnong Zhao, David Blair

Abstract: Detections of gravitational waves (GW) in the frequency band 35 Hz to 500 Hz have led to the birth of GW astronomy. Expected signals above 500 Hz, such as the quasinormal modes of lower mass black holes and neutron star mergers signatures are currently not detectable due to increasing quantum shot noise at high frequencies. Squeezed vacuum injection has been shown to allow broadband sensitivity im… ▽ More Detections of gravitational waves (GW) in the frequency band 35 Hz to 500 Hz have led to the birth of GW astronomy. Expected signals above 500 Hz, such as the quasinormal modes of lower mass black holes and neutron star mergers signatures are currently not detectable due to increasing quantum shot noise at high frequencies. Squeezed vacuum injection has been shown to allow broadband sensitivity improvement, but this technique does not change the slope of the noise at high frequency. It has been shown that white light signal recycling using negative dispersion optomechanical filter cavities with strong optical dilution for thermal noise suppression can in principle allow broadband high frequency sensitivity improvement. Here we present detailed modelling of AlGaAs/GaAs optomechanical filters to identify the available parameter space in which such filters can achieve the low thermal noise required to allow useful sensitivity improvement at high frequency. Material losses, the resolved sideband condition and internal acoustic modes dictate the need for resonators substantially smaller than previously suggested. We identify suitable resonator dimensions and show that a 30 $μ$m scale cat-flap resonator combined with optical squeezing allows 8 fold improvement of strain sensitivity at 2 kHz compared with Advanced LIGO. This corresponds to a detection volume increase of a factor of 500 for sources in this frequency range. △ Less

Submitted 4 June, 2018; v1 submitted 13 November, 2017; originally announced November 2017.

Comments: 20 pages, 4 figures

Journal ref: Phys. Rev. D 97, 124060 (2018)

Trapping in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker

Authors: W. Adam, T. Bergauer, M. Dragicevic, M. Friedl, R. Fruehwirth, M. Hoch, J. Hrubec, M. Krammer, W. Treberspurg, W. Waltenberger, S. Alderweireldt, W. Beaumont, X. Janssen, S. Luyckx, P. Van Mechelen, N. Van Remortel, A. Van Spilbeeck, P. Barria, C. Caillol, B. Clerbaux, G. De Lentdecker, D. Dobur, L. Favart, A. Grebenyuk, Th. Lenzi , et al. (663 additional authors not shown)

Abstract: The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi… ▽ More The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trapping rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trapping rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trapping rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Journal ref: 2016 JINST 11 P04023

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Frobenius gauges and a new theory of p-torsion sheaves in characteristic p. I

Authors: Jean-Marc Fontaine, Uwe Jannsen

Abstract: We develop a new cohomology theory in characteristic p>0, the so called F-gauge cohomology, a cohomology with values in the category of so-called F-gauges, which refines the cristalline cohomology. In this first paper we mainly discuss the theory for smooth projective varieties over perfect fields of charatceristic p. We also compare our theory with other existing structures like the F-zips of Moo… ▽ More We develop a new cohomology theory in characteristic p>0, the so called F-gauge cohomology, a cohomology with values in the category of so-called F-gauges, which refines the cristalline cohomology. In this first paper we mainly discuss the theory for smooth projective varieties over perfect fields of charatceristic p. We also compare our theory with other existing structures like the F-zips of Moonen and Wedhorn and the displays of Langer and Zink. △ Less

Submitted 12 April, 2013; originally announced April 2013.

Comments: 35 pages

MSC Class: 14F20; 14F30

Viscoplastic Properties and Tribological Behavior of Diamond-Like Carbon Films Using Nanoindentation and Nanoscratch Tests

Authors: Viviane Turq, Julien Fontaine, Jean-Luc Loubet, Denis Mazuyer

Abstract: Diamond-Like Carbon (DLC) films have been shown to demonstrate various tribological behaviors: in ultra-high vacuum (UHV), with either friction coefficients as low as 0.01 or less and very mild wear, or very high friction coefficients (>0.4) and drastic wear. These behaviors depend notably on gaseous environment, hydrogen content of the film [1], and on its viscoplastic properties [2,3]. A relat… ▽ More Diamond-Like Carbon (DLC) films have been shown to demonstrate various tribological behaviors: in ultra-high vacuum (UHV), with either friction coefficients as low as 0.01 or less and very mild wear, or very high friction coefficients (>0.4) and drastic wear. These behaviors depend notably on gaseous environment, hydrogen content of the film [1], and on its viscoplastic properties [2,3]. A relation between superlow friction in UHV and viscoplasticity has indeed been established for a-C:H films and confirmed for a fluorinated sample (a-C:F:H). In this study, nanoindentation and nanoscratch tests were conducted in ambient air, using a nanoindentation apparatus, in order to evaluate tribological behaviors, as well as mechanical and viscoplastic properties of different amorphous carbon films. △ Less

Submitted 5 April, 2007; originally announced April 2007.

Comments: Conference was held in Kobe, JAPAN 29th of May to 2nd of June 2005

Journal ref: Synopses of the International Tribology Conference (ITC) Kobe, 2005 (29/05/2005) A-39

Influence of Humidity on Microtribology of Vertically Aligned Carbon Nanotube Film

Authors: Viviane Turq, N. Ohmae, J. M. Martin, J. Fontaine, H. Kinoshita, J. L. Loubet

Abstract: The aim of this study is to probe the influence of water vapor environment on the microtribological properties of a forestlike vertically aligned carbon nanotube (VACNT) film, deposited on a silicon (001) substrate by chemical vapor deposition. Tribological experiments were performed using a gold tip under relative humidity varying from 0 to 100%. Very low adhesion forces and high friction coeff… ▽ More The aim of this study is to probe the influence of water vapor environment on the microtribological properties of a forestlike vertically aligned carbon nanotube (VACNT) film, deposited on a silicon (001) substrate by chemical vapor deposition. Tribological experiments were performed using a gold tip under relative humidity varying from 0 to 100%. Very low adhesion forces and high friction coefficients of 0.6 to 1.3 resulted. The adhesion and friction forces were independent of humidity, due probably to the high hydrophobicity of VACNT. These tribological characteristics were compared to those of a diamond like carbon (DLC) sample. △ Less

Submitted 28 March, 2007; originally announced March 2007.

Journal ref: Tribology Letters 19, 1 (2005) 23-28

Nanoindentation and nanofriction on DLC films

Authors: Sandrine Bec, André Tonck, Julien Fontaine

Abstract: This submission has been removed by arXiv administration because it was submitted in violation of copyright by HAL. This submission has been removed by arXiv administration because it was submitted in violation of copyright by HAL. △ Less

Submitted 10 January, 2007; originally announced January 2007.

Analyse p-adique et représentations Galoisiennes

Authors: Jean-Marc Fontaine

Abstract: The notion of a p-adic de Rham representation of the absolute Galois group of a p-adic field was introduced about twenty years ago (see e.g. [Fo93]). Three important results for this theory have been obtained recently: The structure theorem for the {\it almost $C_p$-representations}, the theorem {\it weakly admissible implies admissible} and the theorem {\it de Rham implies potentially semi-stab… ▽ More The notion of a p-adic de Rham representation of the absolute Galois group of a p-adic field was introduced about twenty years ago (see e.g. [Fo93]). Three important results for this theory have been obtained recently: The structure theorem for the {\it almost $C_p$-representations}, the theorem {\it weakly admissible implies admissible} and the theorem {\it de Rham implies potentially semi-stable}. The proofs of the first two theorems are closely related to the study of a new kind of analytic groups, the {\it Banach-Colmez spaces} and the proof of the third uses deep results on p-{\it adic differential equations on the Robba ring}. △ Less

Submitted 16 April, 2003; originally announced April 2003.

MSC Class: 11F80; 11S25; 12H25; 14G22

Journal ref: Proceedings of the ICM, Beijing 2002, vol. 2, 139--148

Existence de filtrations admissibles sur des isocristaux

Authors: J. -M. Fontaine, M. Rapoport

Abstract: Let (D,phi) be an isocrystal over an algebraically closed field of characteristic p. Let F^bullet be a filtration on D. If F^bullet is (weakly) admissible, its type vector is greater or equal to the slope vector of (D,phi). We prove that conversely, give a type mu greater or equal to the slope vector of (D,phi), there exists an admissible filtration F^bullet on D of type vector equal to mu. We a… ▽ More Let (D,phi) be an isocrystal over an algebraically closed field of characteristic p. Let F^bullet be a filtration on D. If F^bullet is (weakly) admissible, its type vector is greater or equal to the slope vector of (D,phi). We prove that conversely, give a type mu greater or equal to the slope vector of (D,phi), there exists an admissible filtration F^bullet on D of type vector equal to mu. We also give a group theoretic version of this statement and relate it to the existence of lattices M in D with mu(M)=mu. △ Less

Submitted 24 April, 2002; originally announced April 2002.

Comments: 10 pages, AMS-TeX

MSC Class: Primary 11S25; Secondary 14L05; 14F30