-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
The Compact Linear e$^+$e$^-$ Collider (CLIC)
Authors:
Erik Adli,
Gerardo D'Auria,
Nuria Catalan Lasheras,
Vera Cilento,
Roberto Corsini,
Dominik Dannheim,
Steffen Doebert,
Mick Draper,
Angeles Faus-Golfe,
Edward Fraser Mactavish,
Alexej Grudiev,
Andrea Latina,
Lucie Linssen,
John Andrew Osborne,
Yannis Papaphilippou,
Philipp Roloff,
Aidan Robson,
Carlo Rossi,
Andre Sailer,
Daniel Schulte,
Eva Sicking,
Steinar Stapnes,
Igor Syratchev,
Rogelio Tomas Garcia,
Walter Wuensch
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e$^+$e$^-$ collider studied by the international CLIC and CLICdp collaborations. CLIC uses a two-beam acceleration scheme, in which normal-conducting high-gradient 12 GHz accelerating structures are powered via a high-current drive beam. CLIC is foreseen to be built and operated in stages. The initial 380 GeV stage, with a si…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e$^+$e$^-$ collider studied by the international CLIC and CLICdp collaborations. CLIC uses a two-beam acceleration scheme, in which normal-conducting high-gradient 12 GHz accelerating structures are powered via a high-current drive beam. CLIC is foreseen to be built and operated in stages. The initial 380 GeV stage, with a site length of 11 km, optimally combines the exploration of Higgs and top-quark physics, including a top threshold scan near 350 GeV. A higher-energy stage, still using the initial single drive-beam complex, can be optimised for any energy up to 2 TeV. Parameters are presented in detail for a 1.5 TeV stage, with a site length of 29 km. Since the 2018 ESPPU reporting, significant effort was invested in CLIC accelerator optimisation, technology developments and system tests, including collaboration with new-generation light sources and free-electron lasers. CLIC implementation aspects at CERN have covered detailed studies of civil engineering, electrical networks, cooling and ventilation, scheduling, and costing. The CLIC baseline at 380 GeV is now 100 Hz operation, with a luminosity of 4.5$\times 10^{34}$\,cm$^{-2}$s$^{-1}$ and a power consumption of 166 MW. Compared to the 2018 design, this gives three times higher luminosity-per-power. The new baseline has two beam-delivery systems, allowing for two detectors operating in parallel. The cost estimate of the 380 GeV baseline is approximately 7.17 billion CHF. The construction of the first CLIC energy stage could start as early as 2033 with first beams available by 2041. This report summarises the CLIC project, its implementation and running scenarios, with emphasis on new developments and recent progress. It concludes with an update on the CLIC detector studies and on the physics potential in light of the improved accelerator performance.
△ Less
Submitted 31 March, 2025;
originally announced March 2025.
-
HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration. Backup Document
Authors:
Erik Adli,
Joshua Appleby,
Timothy L. Barklow,
Marica Biagini,
Jonas Björklund Svensson,
Mikael Berggren,
Simone Bettoni,
Stewart Boogert,
Philip Burrows,
Allen Caldwell,
Jian Bin Ben Chen,
Vera Cilento,
Laura Corner,
Richard D'Arcy,
Steffen Doebert,
Wang Dou,
Pierre Drobniak,
Calvin Dyson,
Sinead Farrington,
John Farmer,
Angeles Faus-Golfe,
Manuel Formela,
Arianne Formenti,
Louis Forrester,
Brian Foster
, et al. (37 additional authors not shown)
Abstract:
This document expands on the Comprehensive Summary submitted to the EPPSU 2026. It contains details on aspects of the HALHF project that could not be fitted into the Summary. Some sections contain work that is still preliminary and/or status reports on current progress.
This document expands on the Comprehensive Summary submitted to the EPPSU 2026. It contains details on aspects of the HALHF project that could not be fitted into the Summary. Some sections contain work that is still preliminary and/or status reports on current progress.
△ Less
Submitted 30 March, 2025;
originally announced March 2025.
-
HALHF: a hybrid, asymmetric, linear Higgs factory using plasma- and RF-based acceleration
Authors:
Erik Adli,
Joshua Appleby,
Timothy L. Barklow,
Marica Biagini,
Jonas Björklund Svensson,
Mikael Berggren,
Simone Bettoni,
Stewart Boogert,
Philip Burrows,
Allen Caldwell,
Jian Bin Ben Chen,
Vera Cilento,
Laura Corner,
Richard D'Arcy,
Steffen Doebert,
Wang Dou,
Pierre Drobniak,
Calvin Dyson,
Sinead Farrington,
John Farmer,
Angeles Faus-Golfe,
Manuel Formela,
Arianne Formenti,
Louis Forrester,
Brian Foster
, et al. (37 additional authors not shown)
Abstract:
HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $γ= 1.67$. The current HALHF baseline des…
▽ More
HALHF is a hybrid linear collider that uses electron-driven plasma-wakefield acceleration to accelerate electrons to high energy while using radio-frequency cavity technology to accelerate positrons. The most cost-effective solution collides low-energy positrons with high-energy electrons, producing a boost to the final state in the electron direction with $γ= 1.67$. The current HALHF baseline design produces a luminosity comparable to that of the baseline ILC but with a greatly reduced construction and carbon footprint and hence much lower cost than the mature linear-collider designs ILC and CLIC. Costs for HALHF are evaluated, together with that for the approximate 15-year R\&D programme necessary to realise HALHF. Time scales and cost for the R\&D are estimated. Upgrade paths for HALHF technology from a 250~GeV Higgs factory, through 380 and 550~GeV, up to 10~TeV are sketched.
△ Less
Submitted 30 March, 2025; v1 submitted 25 March, 2025;
originally announced March 2025.
-
Monochromatization interaction region optics design for direct s-channel Higgs production at FCC-ee
Authors:
Z. Zhang,
A. Faus-Golfe,
A. Korsun,
B. Bai,
H. Jiang,
K. Oide,
P. Raimondi,
D. d'Enterria,
S. Zhang,
Z. Zhou,
Y. Chi,
F. Zimmermann
Abstract:
The FCC-ee offers the potential to measure the electron Yukawa coupling via direct s-channel Higgs production, $e^+ e^- \rightarrow \text{H}$, at a centre-of-mass (CM) energy of ~125 GeV. This measurement is significantly facilitated if the CM energy spread of $e^+ e^-$ collisions can be reduced to a level comparable to the natural width of the Higgs boson, $Γ_{\text{H}}$ = 4.1 MeV, without substa…
▽ More
The FCC-ee offers the potential to measure the electron Yukawa coupling via direct s-channel Higgs production, $e^+ e^- \rightarrow \text{H}$, at a centre-of-mass (CM) energy of ~125 GeV. This measurement is significantly facilitated if the CM energy spread of $e^+ e^-$ collisions can be reduced to a level comparable to the natural width of the Higgs boson, $Γ_{\text{H}}$ = 4.1 MeV, without substantial loss in luminosity. Achieving this reduction in collision-energy spread is possible through the "monochromatization" concept. The basic idea is to create opposite correlations between spatial position and energy deviation within the colliding beams, which can be accomplished in beam optics by introducing a nonzero dispersion function with opposite signs for the two beams at the interaction point. Since the first proposal in 2016, the implementation of monochromatization at the FCC-ee has been continuously improved, starting from preliminary parametric studies. In this paper, we present a detailed study of the interaction region optics design for this newly proposed collision mode, exploring different potential configurations and their implementation in the FCC-ee global lattice, along with beam dynamics simulations and performance evaluations including the impact of "beamstrahlung."
△ Less
Submitted 2 April, 2025; v1 submitted 6 November, 2024;
originally announced November 2024.
-
Snowmass'21 Accelerator Frontier Report
Authors:
S. Gourlay,
T. Raubenheimer,
V. Shiltsev,
G. Arduini,
R. Assmann,
C. Barbier,
M. Bai,
S. Belomestnykh,
S. Bermudez,
P. Bhat,
A. Faus-Golfe,
J. Galambos,
C. Geddes,
G. Hoffstaetter,
M. Hogan,
Z. Huang,
M. Lamont,
D. Li,
S. Lund,
R. Milner,
P. Musumeci,
E. Nanni,
M. Palmer,
N. Pastrone,
F. Pellemoine
, et al. (13 additional authors not shown)
Abstract:
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these…
▽ More
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these activities are summarized in this Accelerator Frontier report.
△ Less
Submitted 17 November, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
Accelerators for Electroweak Physics and Higgs Boson Studies
Authors:
A. Faus-Golfe,
G. H. Hoffstaetter,
Q. Qin,
F. Zimmermann,
T. Barklow,
E. Barzi,
S. Belomestnykh,
M. Biagini,
M. Chamizo Llatas,
J. Gao,
E. Gianfelice,
B. List,
V. Litvinenko,
E. Nanni,
T. Raubenheimer,
T. Roser,
T. Satogata,
V. Shiltsev,
S. Stapnes,
V. Telnov
Abstract:
We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, v…
▽ More
We discuss the goals, the designs, the state of technical readiness, and the critical R&D needs of the accelerators that are currently under discussion as Higgs and electroweak factories. We also address the respective staging options enabling future energy-frontier colliders. The accelerators covered are based on many different techniques and approaches. They include several circular colliders, various linear colliders, colliders based on energy recovery linacs (ERLs), ERL-ring combinations, as well as gamma-gamma colliders. The linear colliders proposed consist of options for the International Linear Collider (ILC), for the Compact Linear Collider (CLIC), for the Cold Copper Collider (C^3), and for the more recent Higgs-Energy Lepton Collider (HELEN). ERLs are key components of the Recycling Linear e+e- Collider (ReLiC), of the Energy Recovery Linear Collider (ERLC), and of the Circular Energy Recovery Collider (CERC). Among the more conventional ring colliders, the following proposals are featured: the Future Circular Collider (FCC-ee), the Circular Electron Positron Collider (CEPC), the Electron Positron Circular Collider at Fermilab (EPCCF), and the Large Electron Positron collider $\#$3 (LEP-3). In addition, we consider the X-ray FEL based gamma-gamma Collider Higgs Factory (XCC) and the High-Energy High-Luminosity gamma-gamma collider (HE&HL gamma-gamma). Finally, a Higgs factory based on a circular muon collider is mentioned for completeness.
△ Less
Submitted 20 November, 2022; v1 submitted 13 September, 2022;
originally announced September 2022.
-
The CLIC project
Authors:
O. Brunner,
P. N. Burrows,
S. Calatroni,
N. Catalan Lasheras,
R. Corsini,
G. D'Auria,
S. Doebert,
A. Faus-Golfe,
A. Grudiev,
A. Latina,
T. Lefevre,
G. Mcmonagle,
J. Osborne,
Y. Papaphilippou,
A. Robson,
C. Rossi,
R. Ruber,
D. Schulte,
S. Stapnes,
I. Syratchev,
W. Wuensch
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e$^+$e$^-$-collider under development by the CLIC accelerator collaboration, hosted by CERN. The CLIC accelerator has been optimised for three energy stages at centre-of-mass energies 380 GeV, 1.5 TeV and 3 TeV. CLIC uses a novel two-beam acceleration technique, with normal-conducting accelerating structures operating in the…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e$^+$e$^-$-collider under development by the CLIC accelerator collaboration, hosted by CERN. The CLIC accelerator has been optimised for three energy stages at centre-of-mass energies 380 GeV, 1.5 TeV and 3 TeV. CLIC uses a novel two-beam acceleration technique, with normal-conducting accelerating structures operating in the range of 70-100 MV/m.
The report describes recent achievements in accelerator design, technology development and prototyping, system tests and beam tests. Large-scale CLIC-specific beam tests have taken place, for example, at the CLIC Test Facility CTF3 at CERN, at the Accelerator Test Facility ATF2 at KEK, at the FACET facility at SLAC and at the FERMI facility in Trieste. Together, they demonstrate that all implications of the CLIC design parameters are well understood and reproducible in beam tests and prove that the CLIC performance goals are realistic. The implementation of CLIC near CERN has been investigated. Focusing on a staged approach starting at 380 GeV, this includes civil engineering aspects, electrical networks, cooling and ventilation and installation scheduling, transport. All CLIC studies have put emphasis on optimising cost and energy efficiency, and the resulting power and cost estimates are reported. The report follows very closely the accelerator project description in the CLIC Summary Report for the European Particle Physics Strategy update 2018-19.
Detailed studies of the physics potential and detector for CLIC, and R&D on detector technologies, have been carried out by the CLIC detector and physics (CLICdp) collaboration. CLIC provides excellent sensitivity to Beyond Standard Model physics, through direct searches and via a broad set of precision measurements of Standard Model processes, particularly in the Higgs and top-quark sectors.
△ Less
Submitted 18 April, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
The International Linear Collider: A Global Project
Authors:
Philip Bambade,
Tim Barklow,
Ties Behnke,
Mikael Berggren,
James Brau,
Philip Burrows,
Dmitri Denisov,
Angeles Faus-Golfe,
Brian Foster,
Keisuke Fujii,
Juan Fuster,
Frank Gaede,
Paul Grannis,
Christophe Grojean,
Andrew Hutton,
Benno List,
Jenny List,
Shinichiro Michizono,
Akiya Miyamoto,
Olivier Napoly,
Michael Peskin,
Roman Poeschl,
Frank Simon,
Jan Strube,
Junping Tian
, et al. (7 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We r…
▽ More
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We review the important role that polarized beams play in the ILC program. The first stage of the ILC is planned to be a Higgs factory at 250 GeV in the centre of mass. Energy upgrades can naturally be implemented based on the concept of a linear collider. We discuss in detail the ILC program of Higgs boson measurements and the expected precision in the determination of Higgs couplings. We compare the ILC capabilities to those of the HL-LHC and to those of other proposed e+e- Higgs factories. We emphasize throughout that the readiness of the accelerator and the estimates of ILC performance are based on detailed simulations backed by extensive RandD and, for the accelerator technology, operational experience.
△ Less
Submitted 5 April, 2019; v1 submitted 4 March, 2019;
originally announced March 2019.
-
The International Linear Collider. A Global Project
Authors:
Hiroaki Aihara,
Jonathan Bagger,
Philip Bambade,
Barry Barish,
Ties Behnke,
Alain Bellerive,
Mikael Berggren,
James Brau,
Martin Breidenbach,
Ivanka Bozovic-Jelisavcic,
Philip Burrows,
Massimo Caccia,
Paul Colas,
Dmitri Denisov,
Gerald Eigen,
Lyn Evans,
Angeles Faus-Golfe,
Brian Foster,
Keisuke Fujii,
Juan Fuster,
Frank Gaede,
Jie Gao,
Paul Grannis,
Christophe Grojean,
Andrew Hutton
, et al. (37 additional authors not shown)
Abstract:
A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal…
▽ More
A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
The International Linear Collider. A European Perspective
Authors:
Philip Bambade,
Ties Behnke,
Mikael Berggren,
Ivanka Bozovic-Jelisavcic,
Philip Burrows,
Massimo Caccia,
Paul Colas,
Gerald Eigen,
Lyn Evans,
Angeles Faus-Golfe,
Brian Foster,
Juan Fuster,
Frank Gaede,
Christophe Grojean,
Marek Idzik,
Andrea Jeremie,
Tadeusz Lesiak,
Aharon Levy,
Benno List,
Jenny List,
Joachim Mnich,
Olivier Napoly,
Carlo Pagani,
Roman Poeschl,
Francois Richard
, et al. (9 additional authors not shown)
Abstract:
The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-prec…
▽ More
The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Evaluation of Beam Halo from Beam-Gas Scattering at the KEK-ATF
Authors:
R. Yang,
T. Naito,
S. Bai,
A. Aryshev,
K. Kubo,
T. Okugi,
N. Terunuma,
D. Zhou,
A. Faus-Golfe,
V. Kubytskyi,
S. Liu,
S. Wallon
Abstract:
In circular colliders, as well as in damping rings and synchrotron radiation light sources, beam halo is one of the critical issues limiting the performance as well as potentially causing component damage and activation. It is imperative to clearly understand the mechanisms that lead to halo formation and to test the available theoretical models. Elastic beam-gas scattering can drive particles to…
▽ More
In circular colliders, as well as in damping rings and synchrotron radiation light sources, beam halo is one of the critical issues limiting the performance as well as potentially causing component damage and activation. It is imperative to clearly understand the mechanisms that lead to halo formation and to test the available theoretical models. Elastic beam-gas scattering can drive particles to large oscillation amplitudes and be a potential source of beam halo. In this paper, numerical estimation and Monte Carlo simulations of this process at the ATF of KEK are presented. Experimental measurements of beam halo in the ATF2 beam line using a diamond sensor detector are also described, which clearly demonstrates the influence of the beam-gas scattering process on the transverse halo distribution.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
Collimation System
Authors:
R. B. Appleby,
R. Barlow,
A. Bertarelli,
R. Bruce,
F. Carra,
F. Cerutti,
L. Esposito,
A. Faus-Golfe,
H. Garcia Morales,
L. Gentini,
S. M. Gibson,
P. Gradassi,
J. M. Jowett,
R. Kwee-Hinzmann,
L. Lari,
A. Lechner,
T. Markiewicz,
A. Marsili,
J. Molson,
L. J. Nevay,
E. Quaranta,
H. Rafique,
S. Redaelli,
M. Serluca,
E. Skordis
, et al. (3 additional authors not shown)
Abstract:
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
In vacuum diamond sensor scanner for beam halo measurements in the beam line at the KEK Accelerator Test Facility
Authors:
Shan Liu,
Frederic Bogard,
Patrick Cornebise,
Angeles Faus-Golfe,
Nuria Fuster-Martínez,
Erich Griesmayer,
Hayg Guler,
Viacheslav Kubytskyi,
Christophe Sylvia,
Tauchi Toshiaki,
Nobuhiro Terunuma,
Philip Bambade
Abstract:
The investigation of beam halo transverse distributions is important for the understanding of beam losses and the control of backgrounds in Future Linear Colliders (FLC). A novel in vacuum diamond sensor (DSv) scanner with four strips has been designed and developed for the investigation of the beam halo transverse distributions and also for the diagnostics of Compton recoil electrons after the in…
▽ More
The investigation of beam halo transverse distributions is important for the understanding of beam losses and the control of backgrounds in Future Linear Colliders (FLC). A novel in vacuum diamond sensor (DSv) scanner with four strips has been designed and developed for the investigation of the beam halo transverse distributions and also for the diagnostics of Compton recoil electrons after the interaction point (IP) of ATF2, a low energy (1.3 GeV) prototype of the final focus system for the ILC and CLIC linear collider projects. Using the DSv, a dynamic range of $\sim10^6$ has been successfully demonstrated and confirmed for the first time by simultaneous beam core ($\sim10^9$ electrons) and beam halo ($\sim10^3$ electrons) measurements at ATF2. This report presents the characterization, performance studies and tests of the diamond sensors using an $α$ source as well as using the electron beams at PHIL, a low energy ($< 10$ MeV) photo-injector at LAL, and at ATF2. First beam halo measurement results using the DSv at ATF2 with different beam intensities and vacuum levels are also presented. Such measurements not only allow one to evaluate the different sources of beam halo generation but also to define the requirements for a suitable collimation system to be installed at ATF2, as well as to optimize its performance during future operation.
△ Less
Submitted 25 December, 2015;
originally announced December 2015.
-
Proposal for Single-Bunch Collimator Wakefield Measurements at SLAC ESTB
Authors:
J. Resta-Lopez,
C. I. Clarke,
A. Faus-Golfe,
N. Fuster-Martinez,
C. Hast,
R. M. Jones,
A. Latina,
M. Pivi,
G. Rumolo,
D. Schulte,
J. Smith,
R. Tomas
Abstract:
Collimator wakefields in the Beam Delivery System (BDS) of future linear colliders, such as the International Linear Collider (ILC) and the Compact Linear Collider (CLIC), can be an important source of emittance growth and beam jitter amplification, consequently degrading the luminosity. Therefore, a better understanding of collimator wakefield effects is essential to optimise the collimation syst…
▽ More
Collimator wakefields in the Beam Delivery System (BDS) of future linear colliders, such as the International Linear Collider (ILC) and the Compact Linear Collider (CLIC), can be an important source of emittance growth and beam jitter amplification, consequently degrading the luminosity. Therefore, a better understanding of collimator wakefield effects is essential to optimise the collimation systems of future linear colliders in order to minimise wakefield effects. In the past, measurements of single-bunch collimator wakefields have been carried out at SLAC with the aim of benchmarking theory, numerical calculations and experiments. Those studies revealed some discrepancies between the measurements and the theoretical models. New experimental tests using available beam test facilities, such as the End Station A Test Beam (ESTB) at SLAC, would help to improve our understanding on collimator wakefields. ESTB will provide the perfect test bed to investigate collimator wakefields for different bunch length conditions, relevant for both ILC (300 micrometers nominal bunch length) and CLIC (44 micrometers nominal bunch length) studies. Here we propose to perform new experimental tests of collimator wakefield effects on electron/positron beams at SLAC ESTB.
△ Less
Submitted 25 December, 2012;
originally announced December 2012.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Present status of development of damping ring extraction kicker system for CLIC
Authors:
Janne Holma,
Mike Barnes,
Caroline Belver-Aguilar,
Angeles Faus-Golfe,
Fernando Toral
Abstract:
The CLIC damping rings will produce ultra-low emittance beam, with high bunch charge, necessary for the luminosity performance of the collider. To limit the beam emittance blow-up due to oscillations, the pulse power modulators for the damping ring kickers must provide extremely flat, high-voltage pulses: specifications call for a 160 ns duration and a flattop of 12.5 kV, 250 A, with a combined ri…
▽ More
The CLIC damping rings will produce ultra-low emittance beam, with high bunch charge, necessary for the luminosity performance of the collider. To limit the beam emittance blow-up due to oscillations, the pulse power modulators for the damping ring kickers must provide extremely flat, high-voltage pulses: specifications call for a 160 ns duration and a flattop of 12.5 kV, 250 A, with a combined ripple and droop of not more than \pm0.02 %. The stripline design is also extremely challenging: the field for the damping ring kicker system must be homogenous to within \pm0.01 % over a 1 mm radius, and low beam coupling impedance is required. The solid-state modulator, the inductive adder, is a very promising approach to meeting the demanding specifications for the field pulse ripple and droop. This paper describes the initial design of the inductive adder and the striplines of the kicker system.
△ Less
Submitted 29 February, 2012;
originally announced February 2012.
-
Optimization of the e-e- option for the ILC
Authors:
M. Alabau Pons,
R. Appleby,
P. Bambade,
O. Dadoun,
A. Faus-Golfe
Abstract:
The e-e- running mode is one of the interesting physics options at the International Linear Collider (ILC). The luminosity for e-e- collisions is reduced by the beam-beam effects. The resulting beamstrahlung energy loss and beam-beam deflection angles as function of the vertical transverse offset are different compared to the e+e- collisions. In this paper, the dependence of these observables wi…
▽ More
The e-e- running mode is one of the interesting physics options at the International Linear Collider (ILC). The luminosity for e-e- collisions is reduced by the beam-beam effects. The resulting beamstrahlung energy loss and beam-beam deflection angles as function of the vertical transverse offset are different compared to the e+e- collisions. In this paper, the dependence of these observables with the offset for different beam sizes has been analyzed to optimize performances for the e-e- mode, taking into account the requirements of the beam-beam deflection based intra-train feedback system. A first study of the implications for the final focus and extraction line optics is also presented for the cases of the 20 mrad and 2 mrad ILC base line crossing angle geometries.
△ Less
Submitted 6 September, 2006;
originally announced September 2006.
-
P-P Total Cross Sections at VHE from Accelerator Data
Authors:
J. Perez-Peraza,
A. Sanchez-Hertz,
M. Alvarez-Madrigal,
J. Velasco,
A. Faus-Golfe,
A. Gallegos-Cruz
Abstract:
Comparison of P-P total cross-sections estimations at very high energies - from accelerators and cosmic rays - shows a disagreement amounting to more than 10 %, a discrepancy which is beyond statistical errors. Here we use a phenomenological model based on the Multiple-Diffraction approach to successfully describe data at accelerator energies. The predictions of the model are compared with data…
▽ More
Comparison of P-P total cross-sections estimations at very high energies - from accelerators and cosmic rays - shows a disagreement amounting to more than 10 %, a discrepancy which is beyond statistical errors. Here we use a phenomenological model based on the Multiple-Diffraction approach to successfully describe data at accelerator energies. The predictions of the model are compared with data On the basis of regression analysis we determine confident error bands, analyzing the sensitivity of our predictions to the employed data for extrapolation. : using data at 546 and 1.8 TeV, our extrapolations for p-p total cross-sections are only compatible with the Akeno cosmic ray data, predicting a slower rise with energy than other cosmic ray results and other extrapolation methods. We discuss our results within the context of constraints in the light of future accelerator and cosmic ray experimental results.
△ Less
Submitted 6 August, 2004;
originally announced August 2004.
-
Precise measurement of the total cross section and the Coulomb scattering at the LHC
Authors:
A. Faus-Golfe,
M. Haguenauer,
J. Velasco
Abstract:
A precise measurement of the total cross section and the coulomb scattering at the LHC requires the observation of elastically scatteredparticles at extremely small angles (14 microrad, -t < 0.01 GeV**2 for the first case; 3 microrad, -t<0.0006 GeV**2 for the second one). In this paper a very high-beta insertion optics is presented. A feasibility study, including the acceptance of the detectors,…
▽ More
A precise measurement of the total cross section and the coulomb scattering at the LHC requires the observation of elastically scatteredparticles at extremely small angles (14 microrad, -t < 0.01 GeV**2 for the first case; 3 microrad, -t<0.0006 GeV**2 for the second one). In this paper a very high-beta insertion optics is presented. A feasibility study, including the acceptance of the detectors, for an experiment to be installed in IR1 or IR5, is also presented.
△ Less
Submitted 7 February, 2001;
originally announced February 2001.
-
Parametrization of proton-proton total cross section from 10 GeV to 100 TeV
Authors:
J. Perez-Peraza,
J. Velasco,
A. Gallegos-Cruz,
M. Alvarez-Madrigal,
A. Faus-Golfe,
A. Sanchez-Hertz
Abstract:
Present estimations of proton-proton total cross section at very high energies are obtained from cosmic rays (>10^17 eV) by means of some approximations and the knowledge of the measured proton-air cross section at these energies. Besides, total cross section are measured with present day high energy colliders up to nearly 2 TeV in the center of mass (~ 10^15 eV in the laboratory). Here we use a…
▽ More
Present estimations of proton-proton total cross section at very high energies are obtained from cosmic rays (>10^17 eV) by means of some approximations and the knowledge of the measured proton-air cross section at these energies. Besides, total cross section are measured with present day high energy colliders up to nearly 2 TeV in the center of mass (~ 10^15 eV in the laboratory). Here we use a phenomenological model based on the Multiple-Diffraction approach to succesfully describe data at accelerator energies. Then we estimate with it proton-proton total cross sections at cosmic ray energies. On the basis of a forecasting regression analysis we determine confident errors bands, analyzing the sensitivity of our predictions to the employed data for extrapolation.
△ Less
Submitted 13 November, 2000;
originally announced November 2000.
-
Proton-proton total cross sections estimations at very high energies
Authors:
J. Velasco,
J. Perez-Peraza,
A. Gallegos-Cruz,
M. Alvarez-Madrigal,
A. Faus-Golfe,
A. Sanchez-Hertz
Abstract:
Proton-proton total cross sections are measured with present day high energy colliders up to 2 TeV in the centre-of-mass of the system (10^{15}) eV in the laboratory). Several parameterizations, very succesful at low energies, can then be used to extrapolate the measured values and get estimations of cross sections to higher energies (10^{17} eV). On the other hand, from very high energetic cosm…
▽ More
Proton-proton total cross sections are measured with present day high energy colliders up to 2 TeV in the centre-of-mass of the system (10^{15}) eV in the laboratory). Several parameterizations, very succesful at low energies, can then be used to extrapolate the measured values and get estimations of cross sections to higher energies (10^{17} eV). On the other hand, from very high energetic cosmic rays (> 10^{17} eV) and using some approximations, it is possible to get a value for proton-proton total cross section from the knowledge of the proton-proton total cross section at these energies. Here we use a phenomenological model to estimate proton-proton total cross section at cosmic ray energies. On the basis of regression analysis we show that the predictions are highly sensitive to the employed data for extrapolation. Using data at 1.8 TeV our extrapolations for proton-proton total cross section are incompatible with most of cosmic ray results
△ Less
Submitted 26 October, 1999;
originally announced October 1999.
